OSU-Tulsa WIC Program Yesenia Gomez NSCI 5373 December, 5 2002 CHILDHOOD NUTRITION.
NSCI 221L Project
-
Upload
rene-angelito-arroyo -
Category
Documents
-
view
225 -
download
0
Transcript of NSCI 221L Project
-
8/11/2019 NSCI 221L Project
1/14
PARABOLIC
SOLAR
COOKER
An Undergraduate Project
Presented to
the Science Department
PATTS College of Aeronautics
In Partial Fulfillment
of the Requirements for the Degree
Bachelor of Science in Aircraft Maintenance Technology &
Pre-Engineering Course
Rene Angelito M. Arroyo
Renier Joseph V. Dela Rosa
Jonathan Cris A. Figuerrez
Lowel M. Laureles
Adrian Joseph P. Manaloto
Ferdinand Mojares
Glenn Alfred B. Paa
Aldwin S.J. Palisoc
Sebastian B. Sajona
Julysse Mark A. Vergara
John Carlo G. Ulit
February 10, 2014
-
8/11/2019 NSCI 221L Project
2/14
I. TOOLS & MATERIALS
A. Tools
a. Glue Gun
b. Pencil
c. Ruler
d. Scissors
-
8/11/2019 NSCI 221L Project
3/14
B. Materials
a. Mount
1.) 20 Plastic Basin
2.) Masking Tape
-
8/11/2019 NSCI 221L Project
4/14
b. Cooking Stand
1.) Aluminum Foil
2.) Chicken Wire
-
8/11/2019 NSCI 221L Project
5/14
3.) Yakult Bottles
c. Mirror Assembly
1.) Mirrors
-
8/11/2019 NSCI 221L Project
6/14
2.) Laminated Film
3.) Glue Sticks
4.) Aluminum Tape (Optional)
-
8/11/2019 NSCI 221L Project
7/14
d. Materials to be Heated
1.) Microwave-Friendly Plastic Container
2.) Egg
3.) Water in a Ziplock Bag (Optional)
-
8/11/2019 NSCI 221L Project
8/14
II. METHODOLOGY
1. Arrange the Yakult Bottles in Cylindrical-Shape formation in
the center of the 20 Plastic Basin.
-
8/11/2019 NSCI 221L Project
9/14
2.) Apply masking tape to the Yakult Bottles and surround it by chicken wires to form the cylinder-
shape cooking stand.
3.) Apply aluminum tape or masking tape to hold the chicken wire to the
Yakult Bottles.
-
8/11/2019 NSCI 221L Project
10/14
4.) Calibrate the focal point of the mirrors under the sun facing the desired point-target of materials to
be heated. Measure the shape and size of the laminated film support frame for the mirrors also.
5.) Apply masking tape to the 20 Plastic Basin that will temporarily guide you in putting the mirror
to the basin and making it align to each other.
6.) Put glue to the bottom edges of the mirrors, laminated film support frame, and plastic basin. Let it
dry using a blower (optional).
-
8/11/2019 NSCI 221L Project
11/14
-
8/11/2019 NSCI 221L Project
12/14
III. DISCUSSION/EXPLANATION
-
8/11/2019 NSCI 221L Project
13/14
The project aims to construct a working Parabolic Solar Cooker that is worth less than or equal to
P1000 only.
The Parabolic Solar Cooker has four mirrors, two mirrors each parallel to each other at their
bottom edges with an angular focal point to transfer heat by reflection to the main targets which is
the Microwave Friendly Plastic Container with egg and Ziploc Bag with water.
The containers has different thickness. The Microwave Friendly Plastic Container is thicker than
its counterpart. The results showed that the Ziploc Bag with water has faster increase of temperature
in a short period of time than the Microwave Friendly Plastic Container with egg.
IV. COST OF EXPENSES
-
8/11/2019 NSCI 221L Project
14/14
QTY. ITEM BASE PRICE PRICE
4 MIRRORS P100.00 P400.00
1 20 PLASTIC BASIN P54.50 P54.50
1MICROWAVE FRIENDLY PLASTIC
CONTAINERP44.75 P44.75
2 A4 SIZE LAMINATED FILM P35.00 P70.00
10 GLUE STICKS P4.00 P40.00
1 MASKING TAPE P25.00 P25.001 ALUMINUM TAPE P150.00 P150.00
1 CHICKEN WIRE P40.00 P40.00
8 YAKULT BOTTLES P10.00 P80.00
1 ALUMINUM FOIL P80.00 P80.00
TOTAL PRICE P984.25
-