NiXT - LG LTE Connection

© 2010 JDSU. All rights reserved. JDSU CONFIDENTIAL & PROPRIETARY INFORMATION11

LTE LG UE Trace Properties Panel

Set the COM TRACE port of

the UE

Only needed on the earlier

devices Soln3 and LD100U

Select the LG Network Device

NOT your Juniper!

Set the Log Codes –

DL_Grant_&_UL

Ack/Nack_Status

Manual Control for the Early LG

devices up to LD100U

Set the LG UE Type Here


LG L1 Log Mask for DL Grant – Gxx Devices!

The L1 Log Mask

must be set correctly

to collect the DL_Grant_&_UL_Ack/Nack Status

it has a version

selection!

If the wrong version is

selected, you won’t

get key downlink

measurements.

R1 = Soln3, LD100U, Mxx

R2 = Gxx


NEW LG Connect Test!

Issue – Automation of Data Test for LG Devices– Different devices have different needs

– Different networks vary within the standard parameters

– Remove need for Connection Manager

Solution – NEW LG Connect Test– Supports different variants of LG UE

– G7/G17 (LTE/HSPA)

• Need to execute a PLMN Selection Test first!

• User can select DHCP or Manual depending on network support

– G13 (LTE/EV DO)

• Automation via DHCP, IP Routing is Automatic

– You will only see items relevant to the device you are using!


NEW LG Connection Test

Supports the G13, G7, G17 and

legacy (LD100U)

Supports both DHCP and Static

IP address.

Will be part of the 15.2

Release (Nov)

Patch will be made available

for the existing 15.1 Release.


NEW LG PLMN Select Test

G7 / G17 Requires a PLMN Select Test

to run BEFORE connection.

This test can take up to 2 mins to do a

network search.

NOT Needed for G13 Devices.

There is a new LG Disconnect Test

which supports all the LG mobiles.

NiXT - LG LTE Connection

Documents

Transcript of NiXT - LG LTE Connection