NIDDY NODDY and NIDDY NODDY SAMPLER - … · Niddy Noddy or a 90cm (36”) skein on the Niddy Noddy...
1
INSTRUCTIONS Ashford Handicrafts Ltd. Factory and Showroom: 415 West Street, PO Box 474, Ashburton, New Zealand Telephone 64 3 308 9087 Facsimile 64 3 308 8664 Email: [email protected] Internet: www.ashford.co.nz Ashford Guarantee Thank you for purchasing this Ashford product. In the unlikely event there is any fault in manufacture we will replace the item. To validate our guarantee please visit our website or write to us. Please also join our Ashford Club for the Wheel Magazine, competitions and more at www.ashfordclub.co.nz NIDDY NODDY and NIDDY NODDY SAMPLER NN21112013V5 Spinning Wheels from Ashford Wind yarn into a 1.5m (60”) skein on the standard size Niddy Noddy or a 90cm (36”) skein on the Niddy Noddy Sampler for washing and dyeing. Finishing We recommend the Niddy Noddy be first sanded smooth using a fine grit sandpaper. Then seal the wood to protect it from climatic changes and staining, this will also enhance its character and beauty. Our natural Ashford Wax Finish is ideal for this purpose. Assembly To assemble, locate the end pieces onto the ends of the shaft at right angles to each other. To permanently attached one or both end pieces apply a drop of wood glue to the end of the shaft and the hole. Then assemble. Skein the Wool Wind the wool directly from the bobbin still on the spinning wheel but leave the brake tension lightly in place to prevent the bobbin over-spinning. Before removing the skein, loosely tie in two or three places to hold it in place. The skein will now fit our standard skein holder for winding into balls. For more information on fibre preparation, spinning and skeining please refer to “The Ashford Book of Hand Spinning” by Jo Reeve. Kiwi 2 Elizabeth 2 Joy 2 e-Spinner Traveller Traditional Country 2
Transcript of NIDDY NODDY and NIDDY NODDY SAMPLER - … · Niddy Noddy or a 90cm (36”) skein on the Niddy Noddy...
INSTRUCTIONS
Ashford Handicrafts Ltd.Factory and Showroom: 415 West Street,PO Box 474, Ashburton, New ZealandTelephone 64 3 308 9087Facsimile 64 3 308 8664Email: [email protected]: www.ashford.co.nz
Ashford GuaranteeThank you for purchasing this Ashford product. In the unlikely event there is any fault in manufacture we will replace the item. To validate our guarantee please visit our website or write to us. Please also join our Ashford Club for the Wheel Magazine, competitions and more at www.ashfordclub.co.nz
NIDDY NODDY and NIDDY NODDY SAMPLER
NN21112013V5
Spinning Wheels from Ashford
Wind yarn into a 1.5m (60”) skein on the standard size Niddy Noddy or a 90cm (36”) skein on the Niddy Noddy Sampler for washing and dyeing.
FinishingWe recommend the Niddy Noddy be first sanded smooth using a fine grit sandpaper. Then seal the wood to protect it from climatic changes and staining, this will also enhance its character and beauty. Our natural Ashford Wax Finish is ideal for this purpose.
AssemblyTo assemble, locate the end pieces onto the ends of the shaft at right angles to each other. To permanently attached one or both end pieces apply a drop of wood glue to the end of the shaft and the hole. Then assemble.
Skein the WoolWind the wool directly from the bobbin still on the spinning wheel but leave the brake tension lightly in place to prevent the bobbin over-spinning. Before removing the skein, loosely tie in two or three places to hold it in place. The skein will now fit our standard skein holder for winding into balls.
For more information on fibre preparation, spinning and skeining please refer to “The Ashford Book of Hand Spinning” by Jo Reeve.
INSTRUCTIONS
Ashford Handicrafts Ltd.Factory and Showroom: 415 West Street,PO Box 474, Ashburton, New ZealandTelephone 64 3 308 9087Facsimile 64 3 308 8664Email: [email protected]: www.ashford.co.nz
Ashford GuaranteeThank you for purchasing this Ashford product. In the unlikely event there is any fault in manufacture we will replace the item. To validate our guarantee please visit our website or write to us. Please also join our Ashford Club for the Wheel Magazine, competitions and more at www.ashfordclub.co.nz
ASHFORD COUNTRY SPINNER 2
CS26062012V1Kiwi 2Elizabeth 2
INSTRUCTIONS
Ashford Handicrafts Ltd.Factory and Showroom: 415 West Street,PO Box 474, Ashburton, New ZealandTelephone 64 3 308 9087Facsimile 64 3 308 8664Email: [email protected]: www.ashford.co.nz
Ashford GuaranteeThank you for purchasing this Ashford product. In the unlikely event there is any fault in manufacture we will replace the item. To validate our guarantee please visit our website or write to us. Please also join our Ashford Club for the Wheel Magazine, competitions and more at www.ashfordclub.co.nz
JOY 2 SPINNING WHEELSINGLE & DOUBLE TREADLEWITH A SLIDING HOOK FLYER
JASW30072012V3Joy 2
e-Spinner
TravellerTraditional Country 2
