Newsletter June 2017 - asd-stan.org · published six prENs , out of which we want to highlight the...
11
Newsletter – June 2017 To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31 Brussels, 30/06/2017 General News from the Director Dear Readers of our Newsletter, ASD-STAN has published six standards this month. All new prENs are available at our web-shop; the new DIN ENs will follow soon. The ASD-STAN General Assembly and the ASD-STAN Board met on the 20th of June 2017 at the BNAE premises in Paris, France. The ASD-STAN General Assembly approved the closed balance of the association for 2016 and approved the proposed budget for 2017. The Board acknowledged the successful attempts made to improve the financial situation of ASD-STAN and the achievements in the publication scheme, especially for the transformation of older prENs. The Board approved the proposal of the ASD-STAN Technical Authority for the use of ASD-STAN templates for all ASD-STAN working group and domain meetings. All templates are available at the ASD-STAN website https://www.asd- stan.org/standardisation-tools/ . The ASD-STAN Board will meet next time on the 21 st of November 2017 at DIN, Berlin, Germany
Transcript of Newsletter June 2017 - asd-stan.org · published six prENs , out of which we want to highlight the...
Newsletter – June 2017
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Brussels, 30/06/2017
General News from the Director
Dear Readers of our Newsletter,
ASD-STAN has published six standards this month.
All new prENs are available at our web-shop; the new DIN ENs will follow soon.
The ASD-STAN General Assembly and the ASD-STAN Board met on the 20th of
June 2017 at the BNAE
premises in Paris,
France. The ASD-STAN
General Assembly
approved the
closed balance of the
association for 2016 and
approved the proposed
budget for 2017. The
Board acknowledged the
successful attempts
made to improve the
financial situation of
ASD-STAN and the
achievements in the
publication scheme, especially for the transformation of older prENs. The Board approved the proposal of
the ASD-STAN Technical Authority for the use of ASD-STAN templates for all ASD-STAN working group
and domain meetings. All templates are available at the ASD-STAN website https://www.asd-
stan.org/standardisation-tools/ .
The ASD-STAN Board will meet next time on the 21st of November 2017 at DIN, Berlin, Germany
Newsletter– June 2017 2/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
ASD-STAN was presented at the Paris AirShow at Le Bourget from 19th of June to 22nd of June 2017 on
a stand together with BNAE and DIN NL. Updated flyers are available at https://www.asd-stan.org/wp-
content/uploads/ASD-STAN-Flyer-v6-1.pdf .
Why should be an organization involved in Aerospace standardization by ASD-STAN and how can be
this done?
ASD-STAN put some statements together to answer these regular questions at the ASD-STAN website:
https://www.asd-stan.org/the-importance-of-involvement-in-standardization/
Do not hesitate to contact us if you have additional questions.
Thank you and enjoy the read!
With the best regards,
Andreas Jain
Director ASD-STAN
Newsletter– June 2017 3/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
UK – Quo Vadis?
Since the Brexit discussions began and especially since exactly one year ago almost 52% of the UK voters
decided that the UK shall leave the European Union there was confusion within ASD-STAN about the future
participation of the UK in the European Aerospace Standardization process.
ASD-STAN is recognized as the European body for Aerospace Standardization and has
published more than 2.311 European Norms representing 11% of the total CEN norms.
In addition, almost 818 ASD-STAN prEN norms and TR were published. These
figures show which strong position ASD-STAN has achieved over the years not only
within the European Aerospace Industry but also worldwide as a global producer of
internationally accepted modern aerospace standards. But during every of the recent
TA Meetings the concerns were raised if the European position of ASD-STAN might
be weakened after the Brexit.
Two weeks ago, on June 19, the ASD-STAN Technical Authority (TA) had their regular meeting. This
meeting took place in the offices of BNAE in Paris. And it started with quite a surprise. At the anniversary of
the Brexit vote this time we were able to welcome the active presence of two British organizations for the
first time in years. BSI and ADS (ASD-STAN member) representatives joined the meeting and actively
participated in the subjects of our discussions.
And it turned out to be a very productive meeting with a stronger-than-ever participation of the UK in our
ASD-STAN activities. We are now expecting more UK involvement in our Working Groups and Domains.
This will enable us to have a wider distribution of responsibilities for the development of new standards.
This development is in my opinion a highlight which signals a positive future for the activities and the
acceptance of ASD-STAN throughout Europe and on a global scale. At last – the Brexit seems to be not so
bad for ASD-STAN, instead it was a very positive wake-up-call for our activities.
Bill Holler
TA Chairman
Newsletter– June 2017 4/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Important news:
In June 2017, ASD-STAN has
published six prENs, out of
which we want to highlight
the importance of the
following documents:
ASD-STAN EN 9278
ASD-STAN prEN 4165-026 P3
ASD-STAN prEN 4611-002 P2
ASD-STAN prEN 4611-004 P2
ASD-STAN prEN 4641-202 P1
ASD-STAN prEN 4840-101 P1
which are available in our
website for purchase.
Requests for the
network license:
If you wish to have a
network license to use
the document/s inside
your organization
please send the
request to our sales
department here
Newsletter– June 2017 5/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
ASD-STAN FULL Document Index can be found HERE
Add me to your Document Monthly Digest distribution list
To Subscribe to Individual New Document Alerts click HERE
To view all the previous Newsletter please click HERE
Newsletter– June 2017 6/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Statistics 2017
39 New Work Proposals (stage 00.00)
43 New Work Proposal Ballots (stage 10.00)
45 Published prENs (stage 40.00)
79 Documents Sent for Formal Vote (stage 50.00)
56 Ratified EN (stage 60.00)
Statistics 2016
176 New Work Proposals (stage 00.00)
193 New Work Proposal Ballots (stage 10.00)
85 Published prENs (stage 40.00)
77 Documents sent for Formal Vote (stage 50.00)
57 Ratified EN (stage 60.00)
Statistics 2015
84 New Work Proposals (stage 00.00)
84 New Work Proposal Ballots (stage 10.00)
80 Published prENs (stage 40.00)
95 Documents Sent for Formal Vote (stage 50.00)
115 Ratified EN (stage 60.00)
0
20
40
60
80
100
120
140
160
180
200
0 0 0 0 0
39 43 45
79
56
176
193
85 77
57
84 84 80
95
115
2017
2016
2015
Ratified EN Formal Vote Published prEN NWP Ballots NWP
Newsletter– June 2017 7/11
To contact ASD-STAN and make suggestions regarding the Publication Notice E-mail: [email protected] Telephone: +32 2 775 81 26 - Fax: +32 2 775 81 31
Now available at the ASD-STAN Web-shop
(http://www.asd-stan.org/online-document-store/)
These prEN/TR standards are replacing any previous prEN/TR editions with the same
number. They will supersede any previous EN editions (if any) with the same number after the CEN
Formal Vote procedure.
Type Domain Number Ed Title Pages Date
prEN ENG 9278 P1 Aerospace series — General Principles of Obsolescence Management of chemicals, materials and processes
27 1/06/2017
prEN ELEC 4611-002 P2 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002:
General
5 1/06/2017
prEN ELEC 4611-004 P2 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004:
Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV
laser printable - Product standard
12 1/06/2017
prEN ELEC 4641-202 P1 Aerospace series — Cables, optical, 125 µm diameter cladding — Part 202: Semi-loose, ruggedized simplex
construction 9/125 µm SM fibre nominal 2,74 mm outside diameter — Product standard
13 1/06/2017
prEN ELEC 4840-101 P1 Aerospace series — Heat shrinkable moulded shapes — Part 101: Polyolefin, semi-rigid, limited fire hazard — Temperature
range – 30 °C to 105 °C — Product standard
10 1/06/2017
prEN ELEC 4165-026 P3 Aerospace Series - Connector, electrical, rectangular, modular - Operating temperatures 175°C continuous - Part
026: Shielded accessories for single module - Product standard
16 1/06/2017
6 prEN Published
Publication Notice – June 2017
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
These EN standards are replacing any previous prEN/EN editions with the same
number.
Type Domain Number Ed Title Pages Date
EN ELEC 3773-006 1EN Aerospace series — Circuit breakers, single-pole, temperature compensated, rated currents 1 A to
25 A — Part 006: 6,3 mm blade terminal — Product standard
12 07/06/2017
EN ELEC 4674-003 2EN Aerospace series — Electrical cables, installation — Self-wrapping shielding (EMI) protective sleeve — Part 003: Open sleeve — Inside pressurized
area — EMI protection 5 kA — Temperature range - 65 °C to 200 °C — Product standard
10 07/06/2017
EN ELEC 2714-013 2EN Aerospace series — Cables, electrical, single and multicore for general purpose — Operating
temperatures between -55 °C and 260 °C — Part 013: DR family, screened (spiral) and
jacketed, UV laser printable — Product standard
10 07/06/2017
EN MECH 4804 1EN Aerospace series — Flange couplings — Swivel flange with 4 fastening holes, in nickel alloy —
Inch series
6 14/06/2017
EN MECH 4805 1EN Aerospace series — Flange couplings — Weld coupling, straight, in heat resisting steel — Inch
series
6 14/06/2017
EN MECH 4806 1EN Aerospace series — Flange couplings — Weld coupling, straight, in nickel alloy — Inch series
6 14/06/2017
EN MECH 4809 1EN Aerospace series — Flange couplings — Gasket seal with fluorocarbon seal on aluminium plate
with 3 fastening holes — Inch series
7 14/06/2017
EN ELEC 2997-001 4EN Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C
peak — Part 001: Technical specification
72 21/06/2017
EN MECH 4072/AC 2EN Aerospace series — Screws, 100° countersunk normal head, offset cruciform recess, close
tolerance shank, short thread in titanium alloy, aluminium IVD coated — Classification: 1 100
MPa (at ambient temperature) / 425 °C
11 28/06/2017
8 EN Published and 1 Corrigendum
The related DIN EN standards will be available soon at the ASD-STAN web-shop.
Publication Notice – June 2017
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
Ballots reminder
NWP: New Work Proposal Ballot
Number Domain Edition Title Due Date
4717 MAT P2 Aerospace series — Polyetheretherketone with 55% continuous carbon fibre by volume (PEEK-CF55) - Material Specification
01/07/2017
4718 MAT P2 Aerospace series — Polyetheretherketone with 55% continuous glass fibre by volume (PEEK-GF55) - Material Specification
01/07/2017
8.9055 ENV P1 Aerospace series — Hexagonal head bolts, metric and inch series
26/07/2017
8.9056 ENV P1 Aerospace series — Bolt, 12 point flange head, metric series 26/07/2017
Publication Notice – June 2017
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
NDB : National Domain Ballot
Number Domain Edition Title Due Date
4604-001 ELEC P4 Aerospace series — Cable, electrical, for signal transmission — Part 001: Technical specification
14/07/2017
4604-003 ELEC P3 Aerospace series — Cable, electrical, for signal transmission — Part 003: Coaxial cable 50 Ohm, 200 °C, type WZ — Product standard
14/07/2017
4604-006 ELEC P3 Aerospace series — Cable, electrical, for signal transmission — Part 006: Cable, coaxial, 50 Ohms, 200 °C, type WM — Product standard
14/07/2017
4604-007 ELEC P5 Aerospace series — Cable, electrical, for signal transmission — Part 007: Cable, coaxial, 50 Ohms, 200 °C, type WN — Product standard
14/07/2017
6059-305 ELEC P2 Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 305: Fluid absorption
14/07/2017
TR4865 ELEC 1 Aerospace series - Suitable rear accessory to be mated on connector EN3645 (layout type: 21R48) for the qualification of electrical contact
product standards EN3155-065 and EN3155-083
26/07/2017
3660-062 ELEC P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 062: Cable outlet, style K, 90°,
for heat shrinkable boot, shielded, sealed, self locking — Product standard
05/08/2017
3660-063 ELEC P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 063: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed, self locking — Product standard
05/08/2017
3660-064 ELEC P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 064: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed, self locking — Product standard
05/08/2017
3660-065 ELEC P3 Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 065: Cable outlet, style K, 90°,
for heat shrinkable boot, shielded, sealed, self locking — Product standard
05/08/2017
3745-412 ELEC P2 Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 412: Humidity resistance
25/08/2017
4677-001 MAT P4 Aerospace series — Welded and brazed assemblies for aerospace construction — Joints of metallic materials by electron beam welding —
Part 001: Quality of welded assemblies
31/08/2017
4161 MECH P3 Aerospace series — Screws, pan head, offset cruciform recess, normal shank, long thread, in alloy steel, cadmium plated — Classification:
1 100 MPa (at ambient temperature) / 235 °C
11/09/2017
Publication Notice – June 2017
Please feel free to contact your national focal points to have your opinion included. If you need the contact details, please visit the key-contacts webpage: www.asd-stan.org/key_contacts.html or contact us directly at [email protected] .
2583 MECH P2 Aerospace series — Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) — Classification: 1 275 MPa (at ambient
temperature)/650 °C — Technical specification
12/09/2017
3299 MECH P2 Aerospace series — Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver
plated — Technical specification
12/09/2017
3818 MECH P2 Aerospace series — Bolts, MJ threads, in titanium alloy TI-P64001 — Strength class: 1 100 MPa (at ambient temperature) — Technical
specification
12/09/2017
4234 MECH P5 Aerospace series — Clamps, worm drive — Dimensions, masses 19/09/2017
3155-084 ELEC P1 Aerospace series - Electrical contacts used in elements of connection - Part 084 – Contacts, electrical, female - Type A, crimp, class S - Product
standard
27/09/2017
3155-084 ELEC P1 Aerospace series - Electrical contacts used in elements of connection - Part 085 – Contacts, electrical, male, Type A, crimp, class S - Product
standard
27/09/2017
3475-418 ELEC P2 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
28/09/2017
4708-105 ELEC P1 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 105: Semi-flexible polyvinylidene fluoride (PDVF) -
Temperature range -55 ºC and 150 ºC - Product Standard
28/09/2017
6049-009 ELEC P3 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve,
flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
28/09/2017
