Latest Development

Dual Cure Chemistry

Next Generation of Compliant Coating Technology

What is ? 3 component!!

Part BPart A

H2O

Chemical cure;Quick dryingHigh chemical resistanceLow temperature

Slow cure: lasting flexibility improved adhesion ultimate mechanical strength

DCC Unites typical performances of physical drying, chemical curing and moisture curing by matching their generic properties

1 2

3

thin film protection, super fast curing, extreme gloss and colour retention, fast water resistance, longer recoat intervals, high economics, strong reduction of VOC’s

coatings in compliance with the upcoming legislations with regard to the environment and labour circumstances

leads to various DTS (Direct To Substrate) applications!

Dual Cure Chemistry Durable Compliant Coatings

What offers ?

Technical properties

SuperiorAdhesion* Direct to substrate

Fast drying by ambient temp* 30 minutesDry to handle

High abrasive resistance& High flex

* >8 mm

Superior Outdoor

durability* >48 months

Florida

SuperiorCorrosionResistance* >13.000 hrs

Salt spray

High chemicalresistance

Low applicationviscosity

* Low VOC1,0-3,2 LBS

Extreme water Resistance

*2 coat systemMaximum

performance

Economics, savings

Quick dryingOne day coating

Systems5 minutes

recoat intervals

Quick drying

* 30 minutesDry to handle

Thin film protectionMaterial & emission savings

SuperiorDurability;

Lasting aestheticvalues

SuperiorCorrosion

protection;Up to 45 years

High chemicalResistance;

Grafitty Resistant

Quick dryingShut down

Heating ovensApplicationat 0-35º C

High mechanical strength

Extreme water ResistanceNon / Less

maintenance

Short term savings

Long term benefits

PoluRan/UniBar

Advanced Dual Cure polyurethane & epoxy Chemistry

Two component high solids epoxy and polyurethane primers and finishes for steel, aluminum, galvanized and plastics

Used in paint systems fornew constructions, maintenance and industrial product finishing

PoluRan i2

Advanced Dual Cure aliphatic polyurea Chemistry

Direct to substrate paint systems for metals and plasticsfor structured steel and industrial product finishing

Two component super durable dual cure fast drying aliphatic polyurea primers and finishes

•Passes 10,000 Salt Fog Test (13,000 hour panel shown B-1000)

Offers weathering and corrosion protection beyond compare

Offers exceptional color and gloss retention

South Florida Black Box Weathering

0

20

40

60

80

100

Initial 12month

24month

36month

48month

60

de

gre

e

Poluran I2

Siloxanes

Polyurethanes

Poluran i2 retaines 90% of gloss level after 48 months in the most severe environmental test method available

exceeds compliance regulations with thin film technology by providing:

Material savings by reducing total film build in comparison to conventional systems up to 40%

Reduces VOC emissions up to 70%

Reduces regulatory concerns

Extreme lengthening of life cycles (up to factor 5)

International References

DCC Products• Primers 220 PoluRan MC Zimox extreme corrosion resistance, 2,5 to

6 mills306 PoluRan MC Zimox activated for speed of application604 UniBar Iso primer universal adhesion335 PoluRan Fortissimo high chemical resistance178 PoluRan i2 surfacer all surfaces, speed of application

• DTM 170 PoluRan UniCoat HS Fast curing DTM and topcoat 171 PoluRan i2 UniCoat HS spray application low VOC 175 PoluRan i2 SHS up to 6 mills low VOC application 176 PoluRan i2 DTM Semi Gloss universal adhesion, fast processing

• Topcoat 173 PoluRan i2 Clearcoat low voc, fast processing and curing 174 PoluRan i2 Finish 30,60,>90 outperforms

all other technologies like: Polyurethane, Siloxane, Ceramic, PVDF

• Immersion 351 PoluRan Rupac early water resistance, high build 629 UniBar Tar replacement early water resistant, low voc

What will do for you?

DCC offers you savings in time, investment, material, energy and VOC

DCC cuts costs of ownership (maintenance to a minimum level)

DCC increases the life cycle of your painted products by factor 5

DCC offers corrosion control beyond compare