NEWBURGH CITY SD Status Date: 07/14/2017 03:27 PM Smart … · 2019-09-29 · NEWBURGH CITY SD...

NEWBURGH CITY SD Status Date: 07/14/2017 03:27 PM

Smart Schools Investment Plan - 2016-17 Version (Original) - Network Refresh

SSIP Overview

Page Last Modified: 04/18/2017

1. Please enter the name of the person to contact regarding this submission.

Cheryl Rabinowitz 1a. Please enter their phone number for follow up questions.

1-845-563-3455 1b. Please enter their e-mail address for follow up contact.

[email protected] 2. Please indicate below whether this is the first submission, a new or supplemental submission or an amended

submission of an approved Smart Schools Investment Plan.

First submission 3. All New York State public school districts are required to complete and submit a District Instructional Technology

Plan survey to the New York State Education Department in compliance with Section 753 of the Education Law andper Part 100.12 of the Commissioner’s Regulations. Districts that include investments in high-speed broadband orwireless connectivity and/or learning technology equipment or facilities as part of their Smart Schools InvestmentPlan must have a submitted and approved Instructional Technology Plan survey on file with the New York StateEducation Department. By checking this box, you certify that the school district has an approved District Instructional Technology Plansurvey on file with the New York State Education Department.

District Educational Technology Plan Submitted to SED and Approved 4. Pursuant to the requirements of the Smart Schools Bond Act, the planning process must include consultation with

parents, teachers, students, community members, other stakeholders and any nonpublic schools located in thedistrict. By checking the boxes below, you are certifying that you have engaged with those required stakeholders. Eachbox must be checked prior to submitting your Smart Schools Investment Plan.

Parents

Teachers

Students

Community members 4a. If your district contains non-public schools, have you provided a timely opportunity for consultation with these

stakeholders?

Yes

No

N/A 5. Certify that the following required steps have taken place by checking the boxes below: Each box must be checked

prior to submitting your Smart Schools Investment Plan.

The district developed and the school board approved a preliminary Smart Schools Investment Plan.

The preliminary plan was posted on the district website for at least 30 days. The district included an address to which any written comments on

the plan should be sent.

The school board conducted a hearing that enabled stakeholders to respond to the preliminary plan. This hearing may have occured as part of a

normal Board meeting, but adequate notice of the event must have been provided through local media and the district website for at least two

weeks prior to the meeting.

The district prepared a final plan for school board approval and such plan has been approved by the school board.

The final proposed plan that has been submitted has been posted on the district's website.

01/12/2018 11:11 AM of 16



SSIP Overview


5a. Please upload the proposed Smart Schools Investment Plan (SSIP) that was posted on the district's website, alongwith any supporting materials. Note that this should be different than your recently submitted EducationalTechnology Survey. The Final SSIP, as approved by the School Board, should also be posted on the website andremain there during the course of the projects contained therein.

SSIP_PowerPoint.pdf

NECSD SSIP 1 Financial.pdf

NECSD SSBA Overview 3-29-2016a.pdf

Scanned from a Xerox Multifunction Printer.pdf 5b. Enter the webpage address where the final Smart Schools Investment Plan is posted. The Plan should remain

posted for the life of the included projects.

http://www.newburghschools.org/smartschools.php 6. Please enter an estimate of the total number of students and staff that will benefit from this Smart Schools

Investment Plan based on the cumulative projects submitted to date.

13,600 7. An LEA/School District may partner with one or more other LEA/School Districts to form a consortium to pool

Smart Schools Bond Act funds for a project that meets all other Smart School Bond Act requirements. Eachschool district participating in the consortium will need to file an approved Smart Schools Investment Plan for theproject and submit a signed Memorandum of Understanding that sets forth the details of the consortium includingthe roles of each respective district.

The district plans to participate in a consortium to partner with other school district(s) to implement a Smart Schools project. 8. Please enter the name and 6-digit SED Code for each LEA/School District participating in the Consortium.

Partner LEA/District SED BEDS Code

(No Response) (No Response) 9. Please upload a signed Memorandum of Understanding with all of the participating Consortium partners.

(No Response) 10. Your district's Smart Schools Bond Act Allocation is:

$12,831,056 11. Enter the budget sub-allocations by category that you are submitting for approval at this time. If you are not budgeting SSBA

funds for a category, please enter 0 (zero.) If the value entered is $0, you will not be required to complete that surveyquestion.

Sub-

Allocations

School Connectivity1,934,350

Connectivity Projects for Communities0

Classroom Technology0

Pre-Kindergarten Classrooms0

Replace Transportable Classrooms0

High-Tech Security Features0

Totals: 1,934,350

01/12/2018 11:11 AM of 16



School Connectivity


1. In order for students and faculty to receive the maximum benefit from the technology made available under theSmart Schools Bond Act, their school buildings must possess sufficient connectivity infrastructure to ensure thatdevices can be used during the school day. Smart Schools Investment Plans must demonstrate that:

• sufficient infrastructure that meets the Federal Communications Commission’s 100 Mbps per 1,000 students

standard currently exists in the buildings where new devices will be deployed, or

• is a planned use of a portion of Smart Schools Bond Act funds, or

• is under development through another funding source.Smart Schools Bond Act funds used for technology infrastructure or classroom technology investments mustincrease the number of school buildings that meet or exceed the minimum speed standard of 100 Mbps per 1,000students and staff within 12 months. This standard may be met on either a contracted 24/7 firm service or a"burstable" capability. If the standard is met under the burstable criteria, it must be:1. Specifically codified in a service contract with a provider, and2. Guaranteed to be available to all students and devices as needed, particularly during periods of high demand,such as computer-based testing (CBT) periods. Please describe how your district already meets or is planning to meet this standard within 12 months of plansubmission.

We are currently increasing the speed of the district's connection to our internet provider 1.5 Gb. We would use the SSBA funds towards increasing

the speed of our backbone to 10 gigabyte/sec throughput to prevent any bottleneck issues that might hinder performance. 1a. If a district believes that it will be impossible to meet this standard within 12 months, it may apply for a waiver of

this requirement, as described on the Smart Schools website. The waiver must be filed and approved by SED priorto submitting this survey.

By checking this box, you are certifying that the school district has an approved waiver of this requirement on file with the New York State

Education Department. 2. Connectivity Speed Calculator (Required)

Number of

Students

Multiply by

100 Kbps

Divide by 1000

to Convert to

Required

Speed in Mb

Current Speed

in Mb

Expected

Speed to be

Attained Within

12 Months

Expected Date

When

Required

Speed Will be

Met

Calculated Speed11,491 1,149,100 1149.1 1500 (No

Response)

(No

Response)

01/12/2018 11:11 AM of 16



School Connectivity


3. Describe how you intend to use Smart Schools Bond Act funds for high-speed broadband and/or wirelessconnectivity projects in school buildings.

The Newburgh Enlarged City School District will develop a robust, converged network infrastructure including voice, data, video and a wireless

communications network throughout the district. The network infrastructure will provide flexibility, mobility, and secure access to students, teachers,

administrators, schools operations, and schools services staff.

To meet this goal, Newburgh plans to use Smart Bond Act Funds to update our aging network architecture.

Work Entailed in this Project

To create a robust, converged network infrastructure the following work is entailed:

1. The majority of existing Cisco equipment is no longer supported by Cisco or is coming up on end-of-support dates. The installation of a high-

speed 10Gb switching fabric within and between all the wiring closets in all District school buildings will require the purchase of network

switches. New network switches will provide 10/100/1000 PoE (power over Ethernet) ports throughout the district and allow gigabit Ethernet to

all workstations. The network switches will support 10-gigabit uplinks, which will allow for faster transfer rates and prevent packet drops due to

congestion. The new switches will provide stacking capability for data closet switches to enhance manageability and decrease troubleshooting

time. The new switches will provide uplink redundancy to data closet switches to prevent single link failures from causing an outage for large

portions of users. This is designed to increase internet and network speeds between NECSD schools from 1 Gigabit to 10 Gigabit capacities.

2. Implementation of a 1GB capable wireless LAN infrastructure to increase connectivity speed throughout school buildings. Additional and

upgraded wireless access points throughout the District will provide both ubiquitous wireless coverage in buildings and sufficient wireless

bandwidth capacity per access point in classrooms to allow for large-scale use. The new wireless access points will require adding wireless

controllers.

3. Replacing uninterruptible power supply (UPS) systems that are no longer functioning, or reaching the end of their life-cycle. In every wiring

closet to protect sensitive network equipment from power surges and brown-outs, as well as to ensure network connectivity in the event of a

power outage. 4. Describe the linkage between the district's District Instructional Technology Plan and the proposed projects.

(There should be a link between your response to this question and your response to Question 1 in Part E.Curriculum and Instruction "What are the district's plans to use digital connectivity and technology to improveteaching and learning?)

The linkage between the Districts Instructional Technology Plan and this proposed project is the same in this SSIP as in our second SSIP. The

Newburgh Enlarged City School District split our funding request into two separate plans because the infrastructure work required for each building

identified in this SSIP entail the replacement/upgrade of existing equipment & replacement of existing cabling only. No new wiring is needed. That is

the only variance between the proposed work in both SSIP’s.

Our Districts Instructional Technology Plan highlights the importance of developing our students’ technological literacy skills through the use of

research-based strategies that integrate technology into curriculum, instruction, and assessment. Without reliable student and teacher access to a

ubiquitous network infrastructure, technology based resources will be more of a distraction than an enhancement in our learning spaces. The robust

network infrastructure provided for by this project easily supports the achievement of the following research based instructional strategies:

1. Establishing student-centered learning environments which encourage higher-order, open-ended problem-solving where teachers are facilitators of

learning.

2. Seamlessly infusing technology into the classroom environment such that students depend on it as a critical part of the learning process.

3. Providing real-time access to high-quality learning resources which drive personalized learning opportunities.

4. Engaging students’ in collaborative inquiry-based projects that tap into cross-curricular content, abstract concepts and learning in meaningful

ways with peers.

5. Providing opportunities to learners that cultivate real-world, real-time events, and support connections with others around the world to become

global citizens. This will ensure that the students develop the 21st Century technological literacy skills necessary to meet National and New York

State standards.

6. Supporting the delivery of instruction according to individual student learning needs and assist teachers with the development and delivery of

assessments, and the organization and analysis of assessment data.

7. Identifying and delivering professional development workshops on technology topics

8. Identifying and delivering leadership development seminars on leading teachers to infuse technology into the learning environment.

01/12/2018 11:11 AM of 16



School Connectivity


5. If the district wishes to have students and staff access the Internet from wireless devices within the schoolbuilding, or in close proximity to it, it must first ensure that it has a robust Wi-Fi network in place that has sufficientbandwidth to meet user demand.

Please describe how you have quantified this demand and how you plan to meet this demand.

Quantified by using industry standards, i.e. 25-35 users per access point. One access point per classroom will ensure adequate bandwidth for all users.

Our average class size is between 20-30 students.

We plan to meet this demand by installing one high-speed gigabyte enabled wireless access point per classroom. 6. As indicated on of the guidance, the Office of Facilities Planning will have to conduct a preliminary review

of all capital projects, including connectivity projects.

Please indicate on a separate row each project number given to you by the Office of Facilities Planning.

Project Number

44-16-00-01-7-999-BA

(No Response) 7. Certain high-tech security and connectivity infrastructure projects may be eligible for an expedited review process

as determined by the Office of Facilities Planning. Was your project deemed eligible for streamlined review?

Yes 7a. Districts that choose the Streamlined Review Process will be required to certify that they have reviewed all

installations with their licensed architect or engineer of record and provide that person’s name and licensenumber. The licensed professional must review the products and proposed method of installation prior toimplementation and review the work during and after completion in order to affirm that the work was code-compliant, if requested.

I certify that I have reviewed all installations with a licensed architect or engineer of record. 8. Include the name and license number of the architect or engineer of record.

Name License Number

Chris Colby 33581 9. If you are submitting an allocation for School Connectivity complete this table.

Note that the calculated Total at the bottom of the table must equal the Total allocation for this category that youentered in the SSIP Overview overall budget.

Sub-

Allocation

Network/Access Costs1,360,377

Outside Plant Costs0

School Internal Connections and Components573,973

Professional Services(No Response)

Testing0

Other Upfront Costs0

01/12/2018 11:11 AM Page 5 of 16



School Connectivity


Sub-

Allocation

Other Costs0

Totals: 1,934,350 10. Please detail the type, quantity, per unit cost and total cost of the eligible items under each sub-category. This is

especially important for any expenditures listed under the "Other" category. All expenditures must be eligible for

tax-exempt financing to be reimbursed through the SSBA. Sufficient detail must be provided so that we can verify

this is the case. If you have any questions, please contact us directly through [email protected].

NOTE: Wireless Access Points should be included in this category, not under Classroom Educational Technology,

except those that will be loaned/purchased for nonpublic schools.

Add rows under each sub-category for additional items, as needed.

Select the allowable expenditure

type.

Repeat to add another item under

each type.

Item to be purchased Quantity Cost per Item Total Cost

Network/Access Costs WS-C4500X-16SFP+ 27 8,908 240,516

Network/Access Costs WS-C2960X-48FPD-L 30 4,397 131,910

Network/Access Costs WS-C2960X-48FPS-L 53 3,925 208,025

Network/Access Costs AIR-CAP3702I-A-K9 476 900 428,400

Connections/Components MISCELLANEOUS Optics/Cables 11 5,000 55,000

Connections/Components STRUCTURED CABLING 16 15,593 249,500

Network/Access Costs UPS 44 3,500 154,000

Connections/Components INSTALLATION 639 259 166,000

Network/Access Costs Spare WS-C2960X-48FPD-L 3 4,397 13,191

Network/Access Costs Cisco 8510 Wireless Controller 1 25,000 25,000

Network/Access Costs Access Point Licenses 150 125 18,750

Connections/Components 10GB Server Optics 25 600 15,000

Network/Access Costs Spare WS-C2960X-48FPS-L 5 3,925 19,625

Network/Access Costs Cisco 4500X Power Supply 27 1,120 30,240

Network/Access Costs Cisco 4500X Second Power Supply 27 1,120 30,240

Network/Access Costs Cisco 4500X IP Base to Ent. License 27 2,240 60,480

Connections/Components Cisco SFP+ 3M Cable 54 56 3,024

Connections/Components Cisco FlexStack Module 91 675 61,425

Connections/Components Cisco 10G SFP Module 66 364 24,024

01/12/2018 11:11 AM of 16



Community Connectivity (Broadband and Wireless)


1. Describe how you intend to use Smart Schools Bond Act funds for high-speed broadband and/or wirelessconnectivity projects in the community.

(No Response) 2. Please describe how the proposed project(s) will promote student achievement and increase student and/or staff

access to the Internet in a manner that enhances student learning and/or instruction outside of the school dayand/or school building.

(No Response) 3. Community connectivity projects must comply with all the necessary local building codes and regulations

(building and related permits are not required prior to plan submission).

I certify that we will comply with all the necessary local building codes and regulations. 4. Please describe the physical location of the proposed investment.

(No Response) 5. Please provide the initial list of partners participating in the Community Connectivity Broadband Project, along

with their Federal Tax Identification (Employer Identification) number.

Project Partners Federal ID #

(No Response) (No Response) 6. If you are submitting an allocation for Community Connectivity, complete this table.


Sub-Allocation

Network/Access Costs(No Response)

Outside Plant Costs(No Response)

Tower Costs(No Response)

Customer Premises Equipment(No Response)

Professional Services(No Response)

Testing(No Response)

Other Upfront Costs(No Response)

Other Costs(No Response)

Totals: 0 7. Please detail the type, quantity, per unit cost and total cost of the eligible items under each sub-category. This is

especially important for any expenditures listed under the "Other" category. All expenditures must be capital-bond

eligible to be reimbursed through the SSBA. If you have any questions, please contact us directly through

[email protected].


01/12/2018 11:11 AM of 16



Community Connectivity (Broadband and Wireless)



type.


each type.


(No Response) (No Response) (No Response) (No Response) (No Response)

01/12/2018 11:11 AM of 16



Classroom Learning Technology


1. In order for students and faculty to receive the maximum benefit from the technology made available under theSmart Schools Bond Act, their school buildings must possess sufficient connectivity infrastructure to ensure thatdevices can be used during the school day. Smart Schools Investment Plans must demonstrate that sufficientinfrastructure that meets the Federal Communications Commission’s 100 Mbps per 1,000 students standardcurrently exists in the buildings where new devices will be deployed, or is a planned use of a portion of SmartSchools Bond Act funds, or is under development through another funding source.Smart Schools Bond Act funds used for technology infrastructure or classroom technology investments mustincrease the number of school buildings that meet or exceed the minimum speed standard of 100 Mbps per 1,000students and staff within 12 months. This standard may be met on either a contracted 24/7 firm service or a"burstable" capability. If the standard is met under the burstable criteria, it must be:1. Specifically codified in a service contract with a provider, and2. Guaranteed to be available to all students and devices as needed, particularly during periods of high demand,such as computer-based testing (CBT) periods.Please describe how your district already meets or is planning to meet this standard within 12 months of plansubmission.

(No Response) 1a. If a district believes that it will be impossible to meet this standard within 12 months, it may apply for a waiver of

this requirement, as described on the Smart Schools website. The waiver must be filed and approved by SED priorto submitting this survey.

By checking this box, you are certifying that the school district has an approved waiver of this requirement on file with the New York State

Education Department. 2. Connectivity Speed Calculator (Required)

Number of

Students

Multiply by

100 Kbps

Divide by 1000

to Convert to

Required

Speed in Mb

Current Speed

in Mb

Expected

Speed to be

Attained Within

12 Months

Expected Date

When

Required

Speed Will be

Met

Calculated Speed(No

Response)

(No Response) (No

Response)

(No

Response)

(No

Response)

(No

Response) 3. If the district wishes to have students and staff access the Internet from wireless devices within the school

building, or in close proximity to it, it must first ensure that it has a robust Wi-Fi network in place that has sufficientbandwidth to meet user demand.Please describe how you have quantified this demand and how you plan to meet this demand.

(No Response) 4. All New York State public school districts are required to complete and submit an Instructional Technology Plan

survey to the New York State Education Department in compliance with Section 753 of the Education Law and perPart 100.12 of the Commissioner’s Regulations.Districts that include educational technology purchases as part of their Smart Schools Investment Plan must havea submitted and approved Instructional Technology Plan survey on file with the New York State EducationDepartment.

By checking this box, you are certifying that the school district has an approved Instructional Technology Plan survey on file with the New York

State Education Department. 5. Describe the devices you intend to purchase and their compatibility with existing or planned platforms or systems.

Specifically address the adequacy of each facility's electrical, HVAC and other infrastructure necessary to installand support the operation of the planned technology.

(No Response)

01/12/2018 11:11 AM of 16





6. Describe how the proposed technology purchases will: > enhance differentiated instruction; > expand student learning inside and outside the classroom; > benefit students with disabilities and English language learners; and > contribute to the reduction of other learning gaps that have been identified within the district. The expectation is that districts will place a priority on addressing the needs of students who struggle to succeedin a rigorous curriculum. Responses in this section should specifically address this concern and align with thedistrict’s Instructional Technology Plan (in particular Question 2 of E. Curriculum and Instruction: “Does thedistrict's instructional technology plan address the needs of students with disabilities to ensure equitable accessto instruction, materials and assessments?” and Question 3 of the same section: “Does the district's instructionaltechnology plan address the provision of assistive technology specifically for students with disabilities to ensureaccess to and participation in the general curriculum?”

(No Response) 7. Where appropriate, describe how the proposed technology purchases will enhance ongoing communication with

parents and other stakeholders and help the district facilitate technology-based regional partnerships, includingdistance learning and other efforts.

(No Response) 8. Describe the district's plan to provide professional development to ensure that administrators, teachers and staff

can employ the technology purchased to enhance instruction successfully. Note: This response should be aligned and expanded upon in accordance with your district’s response to Question1 of F. Professional Development of your Instructional Technology Plan: “Please provide a summary ofprofessional development offered to teachers and staff, for the time period covered by this plan, to supporttechnology to enhance teaching and learning. Please include topics, audience and method of delivery within yoursummary.”

(No Response) 9. Districts must contact the SUNY/CUNY teacher preparation program that supplies the largest number of the

district's new teachers to request advice on innovative uses and best practices at the intersection of pedagogy andeducational technology.

By checking this box, you certify that you have contacted the SUNY/CUNY teacher preparation program that supplies the largest number of your

new teachers to request advice on these issues. 9a. Please enter the name of the SUNY or CUNY Institution that you contacted.

(No Response) 9b. Enter the primary Institution phone number.

(No Response) 9c. Enter the name of the contact person with whom you consulted and/or will be collaborating with on innovative

uses of technology and best practices.

(No Response) 10. A district whose Smart Schools Investment Plan proposes the purchase of technology devices and other hardware

must account for nonpublic schools in the district. Are there nonpublic schools within your school district?

Yes

No

01/12/2018 11:11 AM of 16





11. Nonpublic Classroom Technology Loan CalculatorThe Smart Schools Bond Act provides that any Classroom Learning Technology purchases made using Smart Schoolsfunds shall be lent, upon request, to nonpublic schools in the district. However, no school district shall be required to loantechnology in amounts greater than the total obtained and spent on technology pursuant to the Smart Schools Bond Act andthe value of such loan may not exceed the total of $250 multiplied by the nonpublic school enrollment in the base year at thetime of enactment.See: http://www.p12.nysed.gov/mgtserv/smart_schools/docs/Smart_Schools_Bond_Act_Guidance_04.27.15_Final.pdf.

1. Classroom

Technology

Sub-allocation

2. Public

Enrollment

(2014-15)

3. Nonpublic

Enrollment

(2014-15)

4. Sum of

Public and

Nonpublic

Enrollment

5. Total Per

Pupil Sub-

allocation

6. Total

Nonpublic Loan

Amount

Calculated Nonpublic LoanAmount (No Response) (No Response) (No Response) (No Response) (No Response) (No Response)

12. To ensure the sustainability of technology purchases made with Smart Schools funds, districts must demonstrate

a long-term plan to maintain and replace technology purchases supported by Smart Schools Bond Act funds. Thissustainability plan shall demonstrate a district's capacity to support recurring costs of use that are ineligible forSmart Schools Bond Act funding such as device maintenance, technical support, Internet and wireless fees,maintenance of hotspots, staff professional development, building maintenance and the replacement of incidentalitems. Further, such a sustainability plan shall include a long-term plan for the replacement of purchased devicesand equipment at the end of their useful life with other funding sources.

By checking this box, you certify that the district has a sustainability plan as described above. 13. Districts must ensure that devices purchased with Smart Schools Bond funds will be distributed, prepared for use,

maintained and supported appropriately. Districts must maintain detailed device inventories in accordance withgenerally accepted accounting principles.

By checking this box, you certify that the district has a distribution and inventory management plan and system in place. 14. If you are submitting an allocation for Classroom Learning Technology complete this table.


Sub-Allocation

Interactive Whiteboards(No Response)

Computer Servers(No Response)

Desktop Computers(No Response)

Laptop Computers(No Response)

Tablet Computers(No Response)





[email protected].

Please specify in the "Item to be Purchased" field which specific expenditures and items are planned to meet the

district's nonpublic loan requirement, if applicable.

NOTE: Wireless Access Points that will be loaned/purchased for nonpublic schools should ONLY be included in

this category, not under School Connectivity, where public school districts would list them.

01/12/2018 11:11 AM of 16







type.


each type.

Item to be Purchased Quantity Cost per Item Total Cost


01/12/2018 11:11 AM of 16



Pre-Kindergarten Classrooms


1. Provide information regarding how and where the district is currently serving pre-kindergarten students and justifythe need for additional space with enrollment projections over 3 years.

(No Response) 2. Describe the district’s plan to construct, enhance or modernize education facilities to accommodate pre-

kindergarten programs. Such plans must include: - Specific descriptions of what the district intends to do to each space;- An affirmation that pre-kindergarten classrooms will contain a minimum of 900 square feet per classroom;- The number of classrooms involved;- The approximate construction costs per classroom; and- Confirmation that the space is district-owned or has a long-term lease that exceeds the probable useful life of theimprovements.

(No Response) 3. Smart Schools Bond Act funds may only be used for capital construction costs. Describe the type and amount of

additional funds that will be required to support ineligible ongoing costs (e.g. instruction, supplies) associated withany additional pre-kindergarten classrooms that the district plans to add.

(No Response) 4. All plans and specifications for the erection, repair, enlargement or remodeling of school buildings in any public

school district in the State must be reviewed and approved by the Commissioner. Districts that plan capital

projects using their Smart Schools Bond Act funds will undergo a Preliminary Review Process by the Office of

Facilities Planning.


Project Number

(No Response) 5. If you have made an allocation for Pre-Kindergarten Classrooms, complete this table.


Sub-Allocation

Construct Pre-K Classrooms(No Response)

Enhance/Modernize Educational Facilities(No Response)





[email protected].


01/12/2018 11:11 AM of 16



Pre-Kindergarten Classrooms



type.


each type.



01/12/2018 11:11 AM of 16



Replace Transportable Classrooms


1. Describe the district’s plan to construct, enhance or modernize education facilities to provide high-qualityinstructional space by replacing transportable classrooms.






Project Number

(No Response) 3. For large projects that seek to blend Smart Schools Bond Act dollars with other funds, please note that Smart

Schools Bond Act funds can be allocated on a pro rata basis depending on the number of new classrooms builtthat directly replace transportable classroom units. If a district seeks to blend Smart Schools Bond Act dollars with other funds describe below what other funds arebeing used and what portion of the money will be Smart Schools Bond Act funds.

(No Response) 4. If you have made an allocation for Replace Transportable Classrooms, complete this table.


Sub-Allocation

Construct New Instructional Space(No Response)

Enhance/Modernize Existing Instructional Space(No Response)





[email protected].



type.


each type.



01/12/2018 11:11 AM of 16



High-Tech Security Features


1. Describe how you intend to use Smart Schools Bond Act funds to install high-tech security features in schoolbuildings and on school campuses.






Project Number

(No Response) 3. Was your project deemed eligible for streamlined Review?

Yes

No 4. Include the name and license number of the architect or engineer of record.

Name License Number

(No Response) (No Response) 5. If you have made an allocation for High-Tech Security Features, complete this table.


Sub-Allocation

Capital-Intensive Security Project (Standard Review)(No Response)

Electronic Security System(No Response)

Entry Control System(No Response)

Approved Door Hardening Project(No Response)





[email protected].



type.


each type.



01/12/2018 11:11 AM of 16

NEWBURGH CITY SD Status Date: 07/14/2017 03:27 PM Smart … · 2019-09-29 · NEWBURGH CITY SD...

Documents

Transcript of NEWBURGH CITY SD Status Date: 07/14/2017 03:27 PM Smart … · 2019-09-29 · NEWBURGH CITY SD...