New Version EFAS 4SE Enhances Functionality and Compatibility

Surpassing well-proven functionality, the new EFAS 4SE comes complete with multiple highlights and user advantages.

f Hallmark features of the EFAS 4SE are substantial enhancements in usability, software functionality and CAN connectivity. f The iCounter provides drivers with comprehensive driving time information and rapid user-optimized manual entry which saves time.

f Workshop professionals profit from improvements in our latest generation of installation Setup Wizard and from integration support for the newest vehicle generations.

f All users enjoy rapid data download, easy menu navigation and simple switching between languages.

Amazing EFAS iCounter FunctionalityYour Advantage.

Supporting the driver with extended information of remaining driving and rest times using Intellic iCounter functionality for drive-time management.

Your management tool.

The iCounter calculates driving and rest times per shift, also for the week and fortnight. And even while driving it informs the driver about upcoming change of activity and their duration.

Remaining driving period until next driving break …

… of 45 minutes driving break.

Remaining time after the driver has daily rest period …

… of 9 hours resting time.

By deploying excellent software operating system architecture, our Digital Tachograph EFAS 4SE fits all vehicle types. This eliminates the need for multiple hardware versions for different vehicle types

f Multiple vehicle software architecture f Wide-range power supply 12/24V f Individual parameter update in line-fitting procedure

Easy menu navigation simplifies and speeds up the installation workflow. Workshop professionals and drivers enjoy a familiar environment.

The Setup Wizard simplifies installation and parameterization by automatic setup of basic parameters like CAN bus data transfer rate. The Setup Wizard minimizes workload and accelerates the installation process.

The easy-to-use software EFAS Service Tool for workshop professionals enables the setting of vehicle parameters in the blink of an eye. Configuration of EFAS Tachographs, software updates, diagnostics and test routines are all supported multilingually.

One

4All

clev

erea

sysi

mpl

e

© 2017 by intellic GmbHFernitzer Straße 5 • 8071 Hausmannstätten • Austriainfo@intellic.com • www.intellic.com

Revision: October 2017Errors and mistakes reserved

New Version EFAS 4SE

Enhanced Functionality and Compatibility

Designed for convenient Installation and Handling

© 2017 by intellic GmbHFernitzer Straße 5 • 8071 Hausmannstätten • Austriainfo@intellic.com • www.intellic.com

Revision: October 2017Errors and mistakes reserved

Digital Tachograph – EFAS 4SE

Highlights of Intellic Digital Tachograph EFAS 4SE

iCounter f iCounter calculates driving and rest times per shift, per week and per fortnight

f Also while driving, iCounter informs the driver about status and upcoming changes of activity

f iCounter enables efficient routing, logistics and disposition

1-Minute Rule Drivers can optimize their driving time day by day. Activity per minute is calculated according to EU Regulation 1266/2009.

One4all Highly flexible and adjustable digital tachograph for diverse vehicle types

f Automatic Setup Wizard simplifies the CAN bus parametrization once the tachograph is plugged in

f The EFAS Service Tool (EST) software enables easy adjustment of parameters. EST is free of charge to all EFAS workshops

f Wide range power supply supports all vehicle types (12 V and 24 V), simplifying warehouse management

High performance and improved handling

f Enhanced usability, software functionality and CAN connectivity

f EFAS 4SE features rapid data downloading f Rapid card reading and writing, and quick card release f Easy switching between languages (e.g. switch to default language by pressing just one button)

f Enhanced manual entry supports the driver and saves time

Connectivity and compatibility

f Standardized remote download of FMS data via second CAN interface (telematics and fleet management)

f Standard tachograph service interface, easy accessible at tachograph front side with protective cap

f Engine speed input (RPM), alternatively usable as IMS-input with adjustable switching threshold

f Full compatibility with all leading accessory tools and workshop equipment

© 2017 by intellic GmbHFernitzer Straße 5 • 8071 Hausmannstätten • Austriainfo@intellic.com • www.intellic.com

Revision: October 2017Errors and mistakes reserved

Digital Tachograph – EFAS 4SETechnical data sheet

Vehicle Integration f Standard CAN bus communication according to ISO 16844 (Road vehicles - tachograph systems)

f CAN ISO 15765 (Diagnostic communication over Controller Area Network)

f Automatic CAN bus adaptation at installation f Adjustable CAN speed (250, 500 kbps), CAN MIX operation - 11/29-Bit identifier

f Switchable CAN termination integrated (120 Ω) f K-Line / RS 232 with diagnostic functions according to ISO 14229 (UDS - Unified Diagnostic Services) and ISO 14230 (Diagnostic communication over K-Line)

Special features f iCounter calculates driving/rest times per shift/week/fortnight. Even while driving, it informs the driver of upcoming changes of activity and their duration.

f 1-Minute Rule - activity per minute is calculated according to EU Regulation 1266/2009

f Comprehensive implementation of EU Regulation 1266/2009

f Supports Fleet Management System (FMS) interface (Version 2 and higher)

f Remote data download via vehicle bus f Automatic Setup Wizard f Exchange of printer module w/o recalibration

Power supply f Power supply range: 8 to 34 V f Operating power consumption: 70 mA @ 24 V (max.)

120 mA @ 12 V (max.) f Power consumption on standby: 2.5 mA @ 24 V (max.)

5 mA @ 12 V (max.)

Language features f Automatic detection of the cardholder’s national language f 27 languages installed f Additionally available languages can be loaded on request f Display messages shown as floating text f Easy switching between languages

Interfaces f Parameters can be set via a range of interfaces f Interface for motion sensor f CAN interface for connecting to on-board electronics f CAN interface to a variety of IMS modules f Second CAN interface for adaptation of telematics and fleet management systems (e.g. for remote download via FMS)

f Configurable K-line interface and info interface f 6-pin standard front interface for calibration, diagnosis and data download, compatible with leading 3rd party tools and devices

f Engine speed input (RPM), alternatively usable as IMS input with adjustable switching threshold

f Three speed-pulse outputs (one of which is independently configurable)

f Two digital status inputs D1/D2 (logging of user-specific events)

f Signal interface for output of tachograph warnings

System features f 128 x 24 pixel Dot-Matrix Display which allows to display 2 x 16 characters

f 2 automatically controlled card readers f Standard radio slot size according to ISO 7736 f Maximum state-of-the-art protection against manipulation f Maximum system reliability f Conforms with EU certification standards f High-precision real-time clock f Parameters can be set via a range of interfaces

Technical data f Dimensions of front panel (W x H): 186 mm x 58 mm f Protection class of device front after installation: IP54 f Protection class of device rear: IP40 f Operational temperature range: -25° C to +80° C f Storage temperature range: -40° C to +85° C f Operational printer temperature: -10° C to +60° C f Weight: 1070 g