P

P

PP

P P P P P PP P P P P

P P P PP P P P P PP P P P P PP P P PP P PP P

80hs 150hs 250hs 320hs 560hs 700hs 1500hs

COMPRESSORAPPLICATIONS

High-Speed Models(ISO 13631, formerly API 11P)

App

licat

ions

Gas Processing

Gas Transmission

Gas Storage & Withdrawal

CO2 & Enhanced Oil Recovery

Offshore Compression

Fuel Gas Boosters

Gas Lift

Gas Gathering

*Approximate values - not for detailed design purposes.

Downstream Models

High-Speed Models

Spec

ifi ca

tions

1,9301,440

3,6202,700

6,0354,500

11,3458,460

13,52010,080

20,76015,480

41,03530,600

18,00080

33,700150

56,200250

105,700470

126,000560

193,300860

382,2001,700

1,200 1,200 1,200 1,200 1,200 750 750

15,0001,000

15,0001,000

15,0001,000

15,0001,000

15,0001,000

15,0001,000

15,0001,000

15,0001,000

4.7120

1,2,3,4

horizontalvertical

horizontalverticalV-type

horizontalverticalV-type

horizontal horizontalvertical

horizontalvertical horizontal

Power (BHP / kW)

Max Rod Load(API combined rating)(LBS / kN)Max Speed (RPM)(lube or non lube)

Max Discharge Pressure (PSIG / BARG)

Max Stroke (IN / MM)

Available Throws

Confi guration

30 63 130 190 320hs 300 320 500

80hs 150hs 250hs n/a 320hs 560hs 700hs 1500hs

6.7170

7.1180

6.9175

11.0280

14.8375

17.7450

1,2,3,4 1,2,3,4 2,4,6 2,3,4,6 2,3,4,6 2,4,6,8

215160

9,00040

1,000

3.9100

1

vertical

4,500310

40

n/a

9,1756,840

85,400380

1,000

9.6245

1,2,3,4

horizontalvertical

NEUMAN & ESSERUpstream & Midstream Reciprocating CompressorsHigh-Speed Compressor Applications & Specifications

High-Speed Model Approximate Dimensions

*Dimensions measured by L x W x H in inches*Assumes average size cylinders

High-Speed Compressor Model Features

Optional FeaturesFrameVarious crankshaft strokesCast iron or nodular iron grades availableCylindersWater-cooled or non-cooledVarious capacity control systems:

• VVCP’s and FVCP’s• Suction valve unloading• Finger / Port / Plug types

Multiple valve OEM’s to enable flexibilityLinersFrame Lubrication SystemAPI 614Full-flow auxiliary oil pumpsCouplingSteel discFlexible elastomericRigid flange

Standard FeaturesFrameSingle-piece, integrated frame minimizes bolted jointsPrecise alignment tolerances minimizes joint fatigue and bolt failureHydraulic bolting for high stress loadsRod loads rated per API 618:

• Combined (gas + inertia) rod loadsCylindersCustom-made gas endsIdeal pipeline cylinders with large valvesIndicator portsEfficient gas passage designFrame Lubrication SystemHand assembled stainless steel internal pipingShaft-driven main oil pumpFull-flow oil filterCylinder Lubrication SystemStandalone mini-lubrication unit:

• Separate reservoir to provide fresh and clean oil• Independently driven pump

FrameCylinderCylinder Liner (if furnished)PistonPiston RodCrankshaftCrankshaft Main & Crankpin BearingsConnecting RodCrossheadCrosshead PinCrosshead Pin Bushing

Single-piece, Cast Iron / Nodular IronCast Iron / Nodular Iron / Forged Steel

Cast IronNodular Iron

Stainless SteelForged Steel

GalvanicForged Steel

Single-piece, Cast Steel with Babbit SurfaceForged SteelLead-Bronze

Materials & Dimensions

Throws 80hs 150hs 250hs 320hs 560hs 700hs 1500hs

2 32 x 162 x 26 32 x 198 x 40 52 x 200 x 48 70 x 220 x 54 78 x 258 x 48 94 x 326 x 72 110 x 364 x 804 68 x 162 x 26 72 x 198 x 40 100 x 200 x 48 110 x 220 x 54 144 x 258 x 48 188 x 326 x 72 200 x 364 x 806 n/a n/a n/a 151 x 220 x 54 216 x 258 x 48 268 x 326 x 72 282 x 364 x 80USA englisch

NEUMAN & ESSER USA, Inc.1502 East Summitry Circle, Katy, Texas 77449, USAneuman-esser.com · midstream.nea-group.com20

18-0

8