Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. •...
Transcript of Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. •...
![Page 1: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/1.jpg)
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 1
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
General Assembly Instructions
• Assembly requires two people and 1–2 hours.
• Assemble bed as near as possible to final resting area.
• Identify all parts and hardware before beginning assembly.
• Retain packaging until bed is fully assembled to ensure no
fittings or components are accidentally discarded.
• Make sure assembly area is clean and level.
Leather Care
• Do not expose leather to direct sunlight, which may cause drying
and fading.
• Do not expose leather to direct heat; keep it at least 12 inches
from heat sources.
• Do not sit on leather with wet or damp clothing.
• Take care when handling sharp objects near leather.
• Blot spills with a clean, dry cloth; never rub to remove spills or stains.
![Page 2: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/2.jpg)
D
E
J
A
C
B
IHeadboardA
FootboardD
B Side railsC
KPlastic feetE
G Slat decksH
Headboard barI
Footboard barJ
Leather handleK
Slipcover (not illustrated)F
G
H
Wrench x 1
Medium bolt x 16M8 x 25mm (1")
Long bolt x 8M8 x 50mm (2")
Extra-long bolt x 4M8 x 70mm (2.75")
Nut x 14
Socket wrench x 1
Allen wrench x 2
Washer x 16
Short bolt x 3M8 x 17mm (5 / 8")
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 2
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Exterior Frame Checklist
Exterior Frame Hardware, Drawn Full Size
![Page 3: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/3.jpg)
N
N Long support barsO
Short support barsM
Center footL
Storage panelsP
O
M
P
L
Short bolt x 3
Medium bolt x 12
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 3
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Interior Frame Checklist
Interior Frame Hardware, Drawn Full Size
![Page 4: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/4.jpg)
C
B
A
Medium bolt x 8
4
C
B
D
Medium bolt x 8
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 4
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Attach footboard to side rails using medium bolts.
Be sure plastic caps in corner brackets are facing up.
2.
Attach side rails to headboard using medium bolts.
Be sure plastic caps in corner brackets are facing up.
1.
![Page 5: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/5.jpg)
Image of bed frame flipping onto side.
E
E
E
E
WIDER CROSS BRACEOF CORNER BRACKET
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 5
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Turn bed frame assembly on its side. Screw feet into wider cross braces
of corner brackets, and tip bed frame assembly back down.
5.
![Page 6: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/6.jpg)
F
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 6
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Loosely position slipcover over footboard and side rails. Beginning at
footboard, fi t slipcover snugly to corners, then remove fabric backing
from velcro a little at a time and press into place along top and bottom
edges of footboard. Repeat process along side rails working toward
the headboard. At headboard, join slipcover portions from side-rail
and headboard at corner and attach fi rmly with velcro.
6.
![Page 7: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/7.jpg)
G
H
Extra-long bolt x 4Nut x 4 Washer x 8
G
H
G
H
Extra-long bolt x 4Nut x 4 Washer x 8
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 7
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Assemble mattress frame by placing slat decks side by side with
slats curving downward and flanged edges to the outsides. Secure
using extra-long bolts, nuts and washers as shown. Loosely tighten
in preparation for final tightening later.
7.
![Page 8: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/8.jpg)
10
Long bolt x 4
Nut x 4
Washer x 4K
J
K
J
I
I
Long bolt x 4
Nut x 4
Washer x 4
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 8
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With slats still curving downward, locate and attach headboard bar
using long bolts, nuts and washers as shown.
8.
Attach footboard bar and leather handle to mattress frame
using long bolts, nuts and washers as shown. Install handle with
“Design Within Reach” facing outward and upside down.
9.
![Page 9: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/9.jpg)
Medium bolt x 8
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 9
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With headboard bar, footboard bar and handle attached,
fi rmly tighten nuts and bolts holding mattress frame together.
10.
Flip mattress frame into position with slats curving upward, then
lower into bed frame as shown. Reaching between slats, attach hinge
assembly to side rails using medium bolts.
11.
![Page 10: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/10.jpg)
Nut x 2
L
M
M
Short bolt x 2
Connect two short support bars to center foot using short bolts.14.
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 10
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With mattress frame raised and held up by assistant, attach
pistons to hinge assembly using nuts as shown.
13.
![Page 11: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/11.jpg)
L / M
Medium bolt x 2
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 11
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Attach short-bar assembly to side rails using medium bolts.15.
NO
N O
Short bolt x 1
Medium bolt x 2
Join two long support bars at center foot and secure with short bolt.
Attach long support bars to footboard and headboard using medium bolts.
16.
![Page 12: Nest Bed Leather Assembly Booklet...• Assemble bed as near as possible to final resting area. • Identify all parts and hardware before beginning assembly. • Retain packaging](https://reader034.fdocuments.us/reader034/viewer/2022051808/600c0b6c5ab5112c856c1159/html5/thumbnails/12.jpg)
P
P
P
P
Place storage panels inside, ensuring all sit fl at.
Mattress frame will not stay fully closed until fi tted with your mattress.
17.
Please Note
WWW.DWR.COM | 1.800. 944 . 2233 | DES IGN WITH IN REACH STUD IOS 12
Nest Storage Bed in LeatherDesigned by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.