NEON PIONEERS - gogsg.com€¦ · transformers and can be used on neon units up to 10 feet long...
Transcript of NEON PIONEERS - gogsg.com€¦ · transformers and can be used on neon units up to 10 feet long...
3
Ralph F. Cortese began makingelectrode equipment in his basement in1927, and three years later foundedEngineering Glass Laboratories in a1000 sq. ft. building in Newark, NewJersey. He soon added aspirators,pirani gauges, mercury traps, gradedseals, and other laboratory glasswareto his product line and, with the help ofhis five children, the business grewrapidly.
EGL continued to develop newproducts, and purchased 12 neon-related companies in the New York,New Jersey area - the core of the neonindustry.
By 1975 EGL had become the world’slargest manufacturer of neon products,with more than 50 percent of all neonsignage worldwide containing EGLelectrodes, tubing, gases, tubesupports, or other components.
The company’s line of processingequipment also expanded to includecrossfires, torches, ribbon burners,
bombarder transformers, chokes,diffusion pumps, vacuum pumps, and awide variety of other equipment -virtually everything needed to build acomplete neon plant. In addition, EGLdeveloped a comprehensive line of coldcathode lamp blanks and housings, aswell as high-output fluorescent lamps.
Today, EGL is still owned and operatedby the Cortese family, now in its fourthgeneration.
Over 12,000 sign shops andcorporate managers in 75 countriesnow specify EGL products andequipment for their signage andarchitectural lighting.
To meet this demand, EGL operates an80,000 sq. ft. manufacturing facilitywith highly-specialized, state-of-the-artequipment, raising quality to newheights and increasing productioncapacity, while continuing to developthe world’s most comprehensive, mostadvanced line of neon products.
For prices on all neon equipment and supplies, please referto a current EGL price list.
In an effort to offer the very best products available, itemsshown in this catalog may be changed at the discretion ofEGL.
EGL reserves the right to correct clerical and/ortypographical errors.
CCOONNTTEENNTTSS
Electrodes ..................................................4
Tubing ........................................................6
C.L. Designer® Series ..................................9
Gases & Gas Transfer Systems ..................11
Bending/Splicing/Tipping Equipment ..........12
Regenerative Blowers ................................14
Bombarders & Chokes ..............................14
Processing Equipment & Accessories ........15
Vacuum Pumps ..........................................16
Neon Accessories ......................................17
High Output Lamps ....................................18
Maxi-Vac Manifold Pumping System ............19
NNEEOONN PPIIOONNEEEERRSS
Mr. Electrode®
Stronger inner lead wires keep shell centered in tube,reducing vibration.
State-of-the-art inverter welding provides superiorshell support and conductivity.
After forming, shells receive pro-prietary nickel plating for moreuniform, non-porous coverage.
SPECIFY ADVANTAGE™
ELECTRODES FOR BRIGHTER,CLEANER, LONGER LASTINGNEON THAN EVERBEFORE POSSIBLE
4
Heavier gauge, solid nickel, corrosion-proof, seven-strand lead wires.
Electrodes are fully annealed to relievestress, preventing cracking.
Thicker tubulation wall for easier, stronger tip-offs.
Thicker shell walls heat up evenly, eliminating hot spots,promoting uniform conversion of emission coating.
Newly developed emission coating measured precisely for each shell,ensuring that all shells “come up” evenly during bombardment.
Patented ceramic collar centers shell in tube, eliminating side ignition,sputtering and blackening.
100% AMERICAN MADE
EELLEECCTTRROODDEE AAPPPPLLIICCAATTIIOONN SSPPEECCIIFFIICCAATTIIOONN GGUUIIDDEE
ADVANTAGETM
TYPE SPECIFICATION
12CM Our smallest ceramic collar electrode designed for use on 8 - 12mm neon tubing. Neon tubing must not exceed 8 feet andconsideration to the electrode size must be exercised during processing. This electrode is rated to operate at 30mAmaximum current. Correct processing levels must be monitored with a Milliamp Meter and Torr or Positive Pressure Gauge.
13CL This electrode is designed for use on 12 – 13mm neon tubing. It is rated for operation on 30 – 45mA transformers and hasa longer shell for use on Accuwall classic tubing and units that may require higher current levels during processing. Wesuggest the use of 12CM electrodes on smaller diameter units of 8 – 10mm tubing.
15CS This short (2 inch) electrode was designed for short length 15mm diameter neon units up to 6 feet long. It operates on up to30mA transformers and is best suited to lead or lead-free glass. The Accuwall classic glass requires electrodes capable oflonger processing times. Due to the short length of the shell, the electrode must be carefully monitored to insure it is notoverheated during processing. It is ideal in applications where standing electrode height is a factor.
15CM Our most popular electrode for use in housings or where short returns are used. It is rated for operation on 30 – 45mAtransformers and can be used on neon units up to 10 feet long provided processing is monitored with all necessary gauges.Since it has a 500mA processing level, this electrode can also be used on smaller diameters of tubing.
15CL This electrode can be used on all 15mm neon tubes and is rated for use on transformer up to 80mA. It can be ordered in 2different glass sleeve lengths (2.625 & 2.875 inches). It is not recommended for use on tubing diameters smaller than15mm due to the high processing current required to fully process the shell. This electrode has successfully outperformedall electrode life tests against our competitors. This shell construction requires full system gauges when processing for bestresults to insure all recommended levels are achieved and vacuum levels during bombardment are monitored to insure shellsare evenly processed.
19CM This cold cathode electrode operates on 120 – 180mA transformers. It is designed for use on 18 – 25mm cold cathodetubing and must not be used on smaller diameters. It requires a bombarder 15KVA or larger to properly heat the shells andglass during production. System requirements and performance must be met before attempting cold cathode production.
19CL This cold cathode electrode operates on up to 200mA transformers and has a longer shell than the 19CM. Again it requiresa larger bombarder, 15KVA or larger and system requirements must be met before attempting cold cathode production.
5
EGL electrodes have consis-tently raised the industry stan-dards for reliability and per-formance since theirintroduction in 1930.
To ensure rigid quality control,all phases of manufacturingare performed in-house,including emission coating,inverter welding shells withlead wires, and sealing andcentering the mounts in glassenvelopes.
Today, EGL manufacturesover 75 standard and customelectrodes - the world’s
broadest line - to satisfy yourmost specialized requirementwithout compromise.
The latest addition to thegrowing family of EGLelectrodes is the“ADVANTAGETM” electrodeseries, combining thefeatures you need for theultimate in brilliance, clarity,and longevity.
All EGL electrodes are madein the USA and are readilyavailable from your localdistributor.
THE WORLD’SLARGESTMANUFACTUREROF ELECTRODES
FORMERPREMIUM PLUS™
DESIGNATION
MA.RATING(MA.)
SHELL GLASSNOTES PART
NO.ELECTRODE
DESIGNATIONTYPE DIA.(INCL.)
LENGTH(INCH)
DIA.(MM.)
LENGTH(INCH)
07
12C
9C
9CMC PREM. PLUS
NEW PRODUCT
9CC PREM. PLUS
13 SHORT
8C
8CCS PREM. PLUS
8CMC PREM. PLUS
8CC PREM. PLUS
19CC PREM. PLUS
19LCC PREM. PLUS
20
20-30
30
30
30-45
30-45
30
30-60
30-45
30-45
80
120-180
200
8SC
9SCI
12CI
12MCC
12CC
12CC
15SCI
15CI
15SCC
15MCC
15CC
19MCC
19LCC
3/16
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
3/8
3/4
1-1/16
3/4
1-1/16
1-1/16
9/16
1-1/4
9/16
1
1-1/4
1-1/4
1-9/16
8
10
12
12
12
13
13
15
15
15
15
19
19
1.25
2
2.5
2
2.5
2.5
2
2.625
2
2.375
2.625
2.875
2.875
3.125
3
3,4
1
1
C,1,4,5
C,1,4,5
C,1,4,5
1
1
C,1,4,5
C,1,4,5
C,1,4,5
C,1,4,5
C,1
C,1
112900113000113100113200122100122200119800119900119554119654120909121009120904121004112900123000114300114400116004116104117204117304114805114905115205115305124500124600124900125000
07 Dumet w/micaT07 Dumet w/mica07 Dumet no mica
T07 Dumet no mica10S ADVANTAGETM
T10S ADVANTAGETM
12L ADVANTAGETM
T12L ADVANTAGETM
12CM ADVANTAGETM
T12CM ADVANTAGETM
12CL ADVANTAGETM
T12CL ADVANTAGETM
13CL ADVANTAGETM
T13CL ADVANTAGETM
13 SHORT FlexT13 SHORT Flex
15L ADVANTAGETM
T15L ADVANTAGETM
15CS ADVANTAGETM
T15CS ADVANTAGETM
15CM ADVANTAGETM
T15CM ADVANTAGETM
15CL ADVANTAGETM 2 5/8”T15CL ADVANTAGETM 2 5/8”
15CL ADVANTAGETM
T15CL ADVANTAGETM
19CM ADVANTAGETM
T19CM ADVANTAGETM
19CL ADVANTAGETM
T19CL ADVANTAGETM
T-Tubulated ElectrodeC-Ceramic collar1-Flex leads only3-Dumet only4-No mica5-U.S. Patent 5,045,756
NOTES: The ADVANTAGETM series of electrodes uses thefollowing nomenclature:
12 C MT 15 C L
C = Ceramic CollarS = Short ShellM = Medium Shell
L = Long ShellT = Tubulated
EXAMPLE:
Tubulated
Ceramic
Shell Length
Diameter
6
EGL has introduced more new colorsin the last 15 years than any othersource - stunning, saturated colorsthat give your neon signage, channelletters, and architectural lightingunequaled brilliance, uniformity, andlongevity.
For top performance and cost effec-tiveness in both general and special-ized applications, EGL produces neontubing of many types including:- SIGNMATE™
Single-Coated Tubing- SIGNMATE II™
Double-Coated Tubing- ACCUWALL® Coated and
Uncoated Colored Glass Tubing- Rare Earth Phosphor Coated Tubing- C.L. Designer® Coated Tubing- Cold Cathode Tubing
Choose from one of the world’slargest tubing color selections now instock for immediate shipment,including colors comparable to othermakers, but with superior batch-to-batch consistency. No other neonproducer provides faster turn-aroundon special colors.
EGL’s proprietary phosphor coatingsdramatically boost adhesion,uniformity, brightness and long termcolor stability - virtually eliminatingflaking, color washout, and darkeningat bends and splices.
EGL phosphor coatings combine spe-cial adhesives, the world’s finestphosphors and a range of proprietaryadditives - specially processed,
uniformly coated, baked and annealedin computer controlled ovens at1000°F (532°C).
Developed and supported by theindustry’s most renowned phosphorchemists with more than 80 years ofcombined experience, theseformulations deliver unmatched bright-ness and stability without flaking,washout, ripples, specks, or darken-ing at the bends (even with shades ofblue).
With EGL’s Total Quality ManagementProgram, you can count on consistentcolor and longevity, tube-to-tube, box-to-box, year-to-year.
All EGL tubing is individuallystraightened, fire-polished, washed,and dried, using EGL’s special Sani-Dry process to eliminate residuecontamination. It is then coated,baked, and annealed, reducing glassstress and strain.
The world’s finest phosphors,proprietary adhesives, and specialadditives combine to provideunmatched brilliance and consistencywithout flaking, even at the tightestbends.
WORLD’S LARGEST COLOR SELECTION
SIGNMATE™ AND SIGNMATE II™ FOOTAGE CHART
Diameter (mm):Ft. per Lb. average:
818
916
1013
1112
1211
1310
158.5
187.1
ACCUWALL® FOOTAGE CHART
Diameter (mm):Ft. per Lb. average:
821
919
1016
1214
1510
KOLD KOTENo-bake alcohol-based phosphor coating mix.Note: Hazardous material shipping restrictions apply.Please consult factory for information.
SIGNMATE II™ 4-FOOT DOUBLE COATED LEAD GLASS
EGLCOLOR
COLOR W/AR/MERC
COLOR W/NEON
DIA.(MM)
PARTNUMBER
Neo Blue II
Clear Gold
VP Green
Clear BriteYellow
Tropic Yellow
Deep Blue
GoldenYellow
Bright Green
Bright Yellow
Brighter YellowHigher Lumens
per foot
Mauve
Tangerine
Amber Orange
Orange
“Tropic”Orange
10111213151889101112131518891011121315188910111213151889101112131518
335510335511335512335513335515335518344508344509344510344511344512344513344515344518346008346009346010346011346012346013346015346018336008336009336010336011336012336013336015336018307508307509307510307511307512307513307515307518
SIGNMATE II™SIGNMATE II™ tubing is first coated with a color stainthat is baked-on, then with EGL’s proprietary phosphors,the pre-staining step resulting in added color vividnessand intensity. Available in five select colors, SIGNMATE II™ tubing is excellent for borders. Careshould be used if tight bending patterns are required asbend “washout” may occur.
EGL SIGNMATE™ SINGLE-COATED 4-FOOT NEON TUBING
SIGNMATE™ tubing is single-coated with proprietary phosphors to produce the world’s most popular whites and colors. All tubing 15mm orsmaller is packed in 25 lb. boxes; 18mm in 20 lb. boxes.
* Whites are listed in order from coolest (bluish) to warmest (pinkish) ** Different shades of pink
• 4' tubing 8 - 15mm packed in 25 lb. boxes; 7mm packed in 30 lb. boxes;•18mm packed in 20 lb. boxes.• When ordering, please use the 6-digit EGL part number.
EGLCOLOR
COLOR W/AR/MERC
COLORW/NEON
DIA.(MM)
PARTNUMBER
8300Bright White
E65 Daylight(white)
6500 HO(white)
E30 Snowhite(white)
6500 Snowhite(white)
Omniwhite
E66 Britewhite(white)
4500(white)
V4500(white)
*
*
*
*
*
*
*
*
*
**
**
**
**
**
**
**
**
**
789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518
331007331008331009331010331011331012331013331015331018317007317008317009317010317011317012317013317015317018318007318008318009318010318011318012318013318015318018312007312008312009312010312011312012312013312015312018314007314008314009314010314011314012314013314015314018314507314508314509314510314511314512314513314515314518319007319008319009319010319011319012319013319015319018313007313008313009313010313011313012313013313015313018321007321008321009321010321011321012321013321015321018
7
EGLCOLOR
COLOR W/AR/MERC
COLORW/NEON
DIA.(MM)
PARTNUMBER
3500(white)
V3500(white)
Warm WhiteE3000(white)
H37 Pink
E10 Green
E20 Turquoise
E21 Aqua
E12 Turquoise
E40 Blue
*
*
*
*
Green
BluishTurquoise
Turquoise
GreenishTurquoise
Blue
**
**
**
**
Amber
Peach Pink
Peach
Peach
Rose
789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518789101112131518
322007322008322009322010322011322012322013322015322018324307324308324309324310324311324312324313324315324318323007323008323009323010323011323012323013323015323018324007324008324009324010324011324012324013324015324018311007311008311009311010311011311012311013311015311018316007316008316009316010316011316012316013316015316018326007326008326009326010326011326012326013326015326018327007327008327009327010327011327012327013327015327018310007310008310009310010310011310012310013310015310018
***5’ lengths also available by special order. Call for details.
8
ACCUWALL®
ACCUWALL® tubing is the machine-drawn colored glass that’s easy tobend, opening a world of design freedom for neon signmakers. Itoffers a more consistent wall thickness outside diameter, and moreuniform color than traditional colored glass tubing, allowing you tobend and process the sturdiest and most vivid signage attainable inless time, with far less breakage.
ACCUWALL® tubing is available uncoated, or coated with EGL’sproprietary rare-earth phosphors. All have fire-polished ends.
COLD CATHODEHistorically, “cold cathode” refers to luminous tubing which is largerthan 15mm in diameter and operates on a minimum current of 60milliamps. This larger diameter tubing is often used for interior coveand accent lighting. EGL cold cathode tubing is coated using thesame quality coating techniques as is used on our small diametertubing. This tubing is available in eight-foot lengths, in 18, 20, and25mm diameters. Standard and “high output” whites, as well assome colors, are produced.
ACCUWALL® MACHINE DRAWN 5-FOOT COLORED GLASS TUBING
EGLCOLOR
ARGON/MERCURY NEON DIA.
(MM)PART
NUMBERAquamarine
(clear)
Aquamarine(coated)
Bromo Blue(clear)
Bromo Blue(coated blue glass)
Bromo Blue(coated purple)
Royal Purple(coated)
Emerald Green(coated)
Noviol Gold(clear)
E-50 Noviol Gold(coated)
Bright Yellow
P-73 Noviol Gold(coated)
True Gold
S-81 Noviol Gold(coated)
Medium Yellow
E-60 Casino Gold(coated)
Rich Gold
Apple Green(coated Noviol Gold
glass)Orange(coated)
Tangerine(coated Orange glass)
Ruby Red(clear)
Ruby Red(coated)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
101215101215101215810121510121510121510121510121581012158101215810121581012151012151012151012151012158101215
394310394312394315371710371712371715398310398312398315368708368710368712368715373710373712373715374010374012374015370610370612370615396310396312369315366708366710366712366715371308371310371312371315369608369610369612369615371508371510371512371515372710372712372715369710369712369715371810371812371815397310397312397315367708367710367712367715
8-FOOT COLD CATHODE TUBING
EGL COLOR DESCRIPTION DIAMETER(MM)
PART NUMBER
Warm White
3500White
4500White
6500Snowhite
Green
Blue
Horizon Blue
2400 KWhite
2800 KWhite
3000 KWhite
3500 KWhite
4100 KWhite
6500 KWhite
Warm White
3500 White
Cool White
6500 White
Green
Blue
Blue
Tri-phosphor
Tri-phosphor
Tri-phosphor
Tri-phosphor
Tri-phosphor
Tri-phosphor
182025182025182025182025182025182025182025182025182025182025182025182025182025
380418380420380425380618380620380625380218380220380225382618382620382625382018382020382025381618381620381625381518381520381525371018371020371025379018379020379025379118379120379125380718380720380725380918380920380925381318381320381325
WAR
MES
T (P
INKI
SH)
CO
OLE
ST (B
LUIS
H)W
ARM
EST
(PIN
KISH
)C
OO
LEST
(BLU
ISH)
COLD CATHODE HOUSINGS
See page 16 for more details
RK212SJ (left)Part No........662150
RK212ST (right)Part No.........662100
3 METER GLASS3 meter glass available by special order. Call for details.
25mm sticks packed 24 per case; 18mm and 20mm sticks packed 30 per case.All sold in case quantity only.
See page 6 for footage chart.
9
FFOORR CCHHAANNNNEELL LLEETTTTEERRSS AANNDD SSIIGGNNAAGGEE RREEQQUUIIRRIINNGGSSUUPPEERR--BBRRIIGGHHTT WWHHIITTEESS AANNDD BBRRIILLLLIIAANNTT CCOOLLOORRSS,,SSPPEECCIIFFYY TTHHEE CC..LL.. DDEESSIIGGNNEERR® SSEERRIIEESS
UP TO 300%BRIGHTER THANCONVENTIONALNEON, PLUSGREATER OUTPUTSTABILITY ANDSTAIN RESISTANCE
This newest generation of neontubing from EGL is an outcomeof recent advances in televisionscreen technology that utilize thebrilliant picture quality you enjoytoday.
Research revealed that rare-earth chemicals incorporated inphosphor coatings emitextremely narrow bandwidths oflight (significant because thenarrower the bandwidth, thebrighter, purer, and more vividthe light emission - the wider thebandwidth, the dimmer andmore washed-out.)
Rare-earth phosphors were alsofound to maintain their purity andhigh output levels far longer thanconventional phosphors, offeringsuperior performance on allcounts.
EGL has combined the latest inrare-earth phosphor technologywith over 70 years of experience
in neon tube making to createan entirely new generation ofultra-high performance neontubing - C.L. Designer® series.Available in a range of ninewhites and six colors, C.L.Designer® tubing is the idealalternative to conventional neonfor channel letter applications formajor reasons:
- 25 to 300 percent higher out-put significantly boosts the bril-liance and visibility of all rigidand vinyl plastic channel letterfascia colors - including bluesand greens that were previouslydifficult to illuminate. Higher out-put can also allow the number oftubing runs to be reduced, cut-ting material and labor costssignificantly.
- Superior color purity and accu-racy enable channel letters tomatch corporate color schemeswith unmatched precision andconsistency.
- Enhanced color stability andresistance to staining and outputdepreciation keep channel let-ters looking brighter and morecolorful significantly longer thanletters containing conventionalneon tubing.
- Super-bright C.L. Designer®
color tubing boosts the vividnessand intensity of colored plasticfascias for far beyond that ofconventional white tubing.
- Blending of three rare-earthphosphors to produce each bril-liant shade of white creates arange of cool-to-warm variants,allowing fine tuning of the illumi-nated plastic fascia colors tomatch corporate color schemesprecisely.
While the outstanding propertiesof C.L. Designer® tubing make itparticularly suitable for channelletter applications, it is equallydesirable for open neon signageand architectural lighting requir-ing super-bright whites, brilliantcolors, and long term coloraccuracy. It processes as easilyas conventional phosphor-coatedtubing and is available in 7, 8, 9,10, 11, 12, 13, 15, and 18mmdiameters.
For best results use EGLAdvantageTM Electrodes and EGL99.999% pure gases.
Channel letters illuminated with C.L.Designer® tubing (right) produce signifi-cantly more light and truer whites thanconventional tubing (left) which emits abluish cast and alters the color of theplastic fascia.
C.L. Designer® tubing (right) is sobright, single runs can often be usedinstead of double runs of conventionalwhite tubing (left), saving material andlabor costs while eliminating the bluishcast of conventional white tubing.
Using colored rare-earth tubing behindcolored plastic fascias producessignage that is not only brighter butmore vivid and pure than signageilluminated with conventional whitetubing. Compare identical blue plasticfascia colors illuminated byconventional white tubing (left) andEGL’s Horizon Blue (right).
Channel letter images represent actual differences between conventional and C.L. Designer® tubing with the limits of 4-color processprinting. See your EGL representative for stunning real life examples.
The rare-earth phosphor emits anarrower band of wavelengths, andtherefore a purer, more vivid color thanthe conventional phosphor.
COMPARISON OF LIGHTEMITTED BY CONVENTIONALvs. RARE-EARTH PHOSPHORS
100
75
50
25
PER
CEN
TR
ELAT
IVE
ENER
GY
WAVELENGTH (nm)
350 450 550 650
Conventional Phosphor coating (Calcium Tungstate activator)
Rare-Earth Phosphor coating(Strontium ChlorophosphateEuropium activator)
Identical green plastic fasciasilluminated by EGL’s rare-earth TropicGreen neon tubing (right) aresignificantly brighter and more vividthan fascias illuminated byconventional white tubing (left).
Whites available:C.L. Designer® 24C.L. Designer® 28C.L. Designer® 30C.L. Designer® 35C.L. Designer® 41C.L. Designer® 45C.L. Designer® 65C.L. Designer® 71C.L. Designer® 83Rare-Earths available:Horizon BlueTropic GreenCoral PinkSeacrestViolet IIFlamingo
10
ALL TUBING FOUR FOOT, LEAD GLASS
RARE-EARTH COLORED TUBING
EGL COLOR DESCRIPTION DIAMETER(MM)
PART NUMBER
Coral Pink
Flamingo
Violet II
Horizon Blue
Tropic Green
Seacrest
High lumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
10121315181012131518101112131518101213151810121315181012131518
329010329012329013329015329018300010300012300013300015300018306510306511306512306513306515306518341010341012341013341015341018307010307012307013307015307018301010301012301013301015301018
C.L. DESIGNER® WHITE TUBING
EGL COLOR DESCRIPTION DIAMETER(MM)
PART NUMBER
C.L. Designer® 24
C.L. Designer® 28
C.L. Designer® 30
C.L. Designer® 35
C.L. Designer® 41
C.L. Designer® 45
C.L. Designer® 65
C.L. Designer® 71
C.L. Designer® 83
High lumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
High LumenOutput/Color
Rendition/Stability
10121315181012131518101112131518101213151810121315181012131518101213151810121315181012131518
331510331512331513331515331518332510332512332513332515332518332710332711332712332713332715332718332910332912332913332915332918333210333212333213333215333218333610333612333613333615333618333410333412333413333415333418333810333812333813333815333818334310334312334313334315334318
C.L. DESIGNER® LIGHT OUTPUT (LUMENS PER FOOT)
TUBING COLOR DEGREESKELVIN
12MM 15MM 20MM 25MM
30mA 30mA 60mA 60mA 120mA 60mA 120mAC.L. Designer® 24C.L. Designer® 28C.L. Designer® 30C.L. Designer® 35C.L. Designer® 41C.L. Designer® 45C.L. Designer® 65C.L. Designer® 71C.L. Designer® 83
Coral PinkFlamingoViolet II
Horizon BlueTropic Green
Seacrest
2400°2800°3000°3500°4100°4500°6500°7100°8300°
NANANANANANA
23525026025024024024024524517012565100270190
2002102202102002002002052051301005080240150
375400410400380380390395395270200100170420290
300320360280295300340345345
150
520550700560540560640650650
300
235250260200200210250255255
130
450480460410400415470480480
210
C.L. DESIGNER® SELECTION GUIDEPLASTICCOLOR
ROHM & HASSCOLOR #
CYROCOLOR #
CONVENTIONALCOLOR
C.L. DESIGNER®/RARE EARTH COLOR
ADVANTAGES OFC.L. DESIGNER®/RARE EARTH
WhiteBlue
Blue
Green
Green
YellowOrangeIvory
Black/WhiteRedRed
73282114
2050
2108
2030
203721192146306327932157
015-2605-0
606-0
507-0
506-0
407-2303-0047-21124-1278-0205-0
6500 Snowhite6500 Snowhite or E-40 Blue
6500 Snowhite or E-40 Blue
6500 Snowhite or E-10 Green
6500 Snowhite or E-10 Green
3500, 4500 White or 6500 Snowhite6500 Snowhite6500 Snowhite6500 Snowhite
Clear RedClear Red
C.L. Designer® 71 or 83Horizon Blue
Horizon Blue
Tropic Green
Tropic Green
C.L. Designer® 28 or 65Coral Pink
C.L. Designer® 28, 35, or 65C.L. Designer® 71 or 83
NoneNone
60% Brighter125% Brighter than 6500;
25% brighter than E-40 w/enhanced color stability150% Brighter than 6500;
35% brighter than E-40 w/enhanced color stability300% Brighter than 6500;
25% brighter than E-10 w/enhanced color stability150% Brighter than 6500;
Slightly brighter than E-10 w/enhanced color stability90% Brighter
300% Brighter than 650060% Brighter35% Brighter
Recommend Clear RedRecommend Clear Red
All C.L. Designer® Whites and Rare-Earth tubing selections will produce brighter, moreintense colors than the conventional selections.
All C.L. Designer® Whites and Rare-Earth tubing selections are also availablein 7, 8, & 9mm. Part numbers not shown.
***5’ lengths also available by special order. Call for details.
11
EGL standard and blended gasmixtures are shipped in hard orsoft glass flasks in Jumbo(2.65 liter) and Regular (0.9liter) sizes as shown below. Allgases are bottled in acompletely new rare gas plant,using state-of-the-art apparatus
and techniques. Also availableis a complete gas transfersystem for use with 25, 50, or100 liter EGL disposable gastanks.
AALLLL EEGGLL GGAASSEESS AARREE OOFFTTHHEE HHIIGGHHEESSTT QQUUAALLIITTYY::9999..999999%% PPUURREE
MAXIMIZE QUALITY, CONSISTENCY, AND ECONOMYWITH EGL’S GAS TRANSFER SYSTEM
Tank (optional)
GAS TRANSFER SYSTEMS AND COMPONENTSGAS TRANSFER SYSTEMS
AND COMPONENTSPART
NUMBERGAS TRANSFER SYSTEM(excluding tank - One System required per gas tank)MAJOR COMPONENTS:Pressure GaugeRobbins ValveGlass fitting for Robbins ValveMetal fitting for Robbins ValveWashers:Washer compression set for metal sideTeflon washer compression set for glass side
448501
448520733000733010733020
448005448010
STANDARD AND BLENDED GAS MIXTURESGASTYPE CHARACTERISTICS VOLUME
(LITERS)SOFT GLASS
(LEAD)HARD GLASS(PYREX®) TANK
PARTNUMBER
EGLNEON
EGLARGON
EGLBLUE
(REPLACES#1050)
EGL K4COLD
WEATHERGAS
(REPLACES#1051)
EGLFLUSHINGHELIUM
EGLHELIUM
EGL KRYPTON
EGLXENON
Excellent for clear red units,or for coated tubing.
For low-voltage fluorescenttubes and fluorescent lamps. Mercury required. Not recommended foroutdoor use.
EGL’s standard mixture for warmer climates - used in clear or fluorescent-coatedtubing with added mercury.
The best for all-weatherapplications, from below-zeroregions to the tropics. Thehigh percentage of Ne in K4provides the heat necessaryto completely vaporize mer-cury under cold weather con-ditions. Mercury required.Proven 14 to 49% brighterthan competitive cold weath-er gases by an independent laboratory.The finest and safest gas forpreliminary bombarding, orfor flushing-out repair units.
For clear glass tubes; giving apale flesh-pink color, or whenusing noviol-coated tubing, awarm gold tone. Must be used at a lower pressure than normal (4-6mm typically).In coated glass, Krypton (Kr)has much the same effect asAr. In clear glass, the colorcould be best described as pale platinum. Should not befilled to pressures higher than 12mm because of the tendency to develop lineardischarge. Xenon (Xe) is similar to Kr incolor, but principally used inspecial effects for linear dis-charge, or for high-pressureflash tubes. This is a relatively high-resistance gas.
.901.002.652.00
25.0050.00
100.000.901.002.652.00
25.0050.00
100.000.901.002.652.00
25.0050.00
100.000.901.002.652.00
25.0050.00
100.00
0.901.002.65
25.0050.00
100.000.901.002.65
25.0050.00
100.000.901.00
0.901.00
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
***
***
***
***
***
***
412001416000420000424000436000440000444000413001417000421000425000437000441000445000411001415000419000423000435000439000443000414001418000422000426000438000442000446000
429001430000426175438800442200445600427001428000426150438600442100445500431001432000
433001434000
Simply eliminating system shut-downs for flask replacementswill justify investing in thissystem. In addition, it offers:- Gas purity: Gas bottled in
cylinders maintains its highestpurity.- Tighter control: With the
system’s pressure gauge,stopcock leakage is virtuallynon-existent.- Better economy: Liter-for-liter,
costs are reduced bypurchasing in bulk. EGL tanksare available in 25, 50, and100 liter sizes.
Additionally, since the tanks arecapable of being filled to amuch higher pressure thanglass flasks, 100% of gasvolume will be used rather thanapproximately 80% whenutilizing the glass flasks.
The EGL Gas Transfer Systemprovides uninterrupted flow ofpure Neon, Argon, or specialgas mixtures into tubes for
neon signs, cold cathode, etc.A precision-made filling valveeliminates the use of two glassstopcocks. Clean gas flow isguaranteed, as compared todouble-stopcock systems whichrequire constant lubrication andcan allow air leakage into glassflasks. No entrapped greasevapors are automaticallypushed into the neon tubeswhen the glass stopcocks areused.
No gas losses are incurredwhen changing glass flaskswith small immeasurable vol-umes of remaining gases. Nolabor charges are incurred foreach changing of replacementflasks. For example, one fifty(50) liter cylinder will eliminate50 bottle changes. A systemcan hold 100% of its gasesindefinitely, unlike glass stop-cocks which cannot preventseepage for long periods oftime.
12
BURNER TIPS:N=Natural GasA=Artificial Gas PART NO.
COMPLETE SYSTEMSincluding burners, side pipes,sliding base, T-splitter, and1/4” Venturi mixer WITH WITHOUT
STAND STANDBMT SERIES (shown) BMT-7N OR A 652551 652550
- provides a knife-shape flame,ideal for splicing and sufficient heatfor bending glass 15mm or less.
S21 SERIES S21-N 653051 653000- provides a broad, high-heat S21-A 653551 653500flame hotter than 5-pointcrossfires but more diffused,hence better for bendingthan splicing.
BURNER TIPS:SERIES BMT-7-N OR A N or A 667515SERIES S21-N N 667530SERIES S21-A A 667525
SIDE PIPESSERIES BMT-7 AND S21 655560REDUCER FOR SERIES BMT-7 655520
MIXERSSERIES 790-JC/BMT-7¼ (#1728) complete 675000SERIES S21 (#1929) complete 677000
CANNON-FIRE CROSSFIRES
COMPONENTS COMMON TO CANNON-FIRE AND 5-POINT CROSSFIRES
PART NO.ADJUSTABLE BASE CASTINGWITH 2 SLIDING STATIONS 6550002-SLIDE BRACKETS 655500
NEEDLE VALVE (FITS ALL 1/4” MIXERS) 668000T SPLITTER 655510
SWING-OUT BURNERCOMPLETE WITH S21 BURNERAND 1/8” VENTURI MIXER 655200
A NOTE ABOUT VENTURI MIXERS:Some glassblowers construct their own mixer “T”s fromglass or plumbers’ parts, and use common valves to controlair and gas-flow. Although seemingly cost-conscious, thatprocedure has a negative effect on the overall quality of thework. The reason - control. To make clean joints with leadglass, a stable, blue-violet flame is required. If a low-costsetup is being used and difficulties are experienced, it isstrongly recommended that a proper mixer be tried.
BURNER TIPS:N=Natural GasA=Artificial Gas PART NO.
COMPLETE SYSTEMSincluding burners, side pipessliding base, T-splitter, and WITH WITHOUT1/4” Venturi mixer STAND STAND
790 JC SERIES (shown) 790-JC-N or A 651051 651000- provides an even heat output system to bend orsplice all diameters, from8mm to 35mm.*Note: 790-JC-N or A also includes
manifold for burner tips
BURNER TIPSSeries 790-JC-N or A N or A 667510
SIDE PIPESSERIES 790-JC 655540
5-POINT CROSSFIRE MANIFOLDSSERIES 790-JC-N or A (with burner tips) N or A 674200MANIFOLD CASTING ONLY 674000
BRASS ELBOW 655530
MIXERSERIES 790-JC/BMT-7¼ (#1728) 675000
5-POINT CROSSFIRES
Cannon-fire Crossfire shownwith optional Swing-Out Burner
5-Point Crossfire shown withoptional Swing-Out Burner
Burner Tip S21A-667525N-667530
Mixer Complete790-JC/BMT-7¼ -675000S21 - 677000
Mixer Complete790-JC/BMT-7 -675000
Manifold withBurner Tips790-JC-N - 674200
Burner Tip BMT7N-7A - 667515
T-Splitter - 655510
13
16” ribbon burner 24” ribbon burner
BURNER TIPS: PART NO.N=Natural GasA=Artificial Gas
WITH WITHOUTSTAND STAND
COMPLETE (Includes economizer and bench flange)16” RIBBON BURNER (shown) N 664104 664102
A 664103 66410124” RIBBON BURNER (shown top right) N 658001 658000
A 658501 658500 HEAD ONLY
16” RIBBON BURNER HEAD N 664202A 664201
24” RIBBON BURNER HEAD N 659000A 659500
SCREENS16” SCREENS N 664325
A 66432024” SCREENS N 663100
A 663000
SLIDES16” SLIDE 66434012” SLIDES (2) 662000
BENCH/STAND FLANGE 664300
FLOOR STAND 664315
ECONOMIZER 664310
RIBBON BURNERS
Ribbon burners are utilized for creating sweeping curve effects andscript-type lettering for neon signs. EGL Ribbon Burners feature abrass burner bar to eliminate warping and side ignition, and animproved economizer valve with O-ring sealsto eliminate leakage. All models are equippedwith a control slide to adjust flame length.The cast aluminum body rotates 360° on acollar flange which can be bolted on a work-bench, or threaded onto an available pipestand with a 17-pound weighted base plate.
SPACE BURNER TIPS:BETWEEN N=Natural GasBURNERS A=Artificial Gas PART NO.
SPLICINGSPLICING TORCH NO. 1with #81 oblong “fishtail” burnersfor splicing 10-25mm glass.
BRASS FISHTAIL BURNER TIPSfor Torch No. 1 (1/4” MPT)
COMBINATION SPLICING/TIPPINGCOMBINATIONSPLICING/TIPPING TORCH NO. 2with #228 oblong “fishtail” burners forsplicing smaller diameter glass (up to 13mm),and for tipping off with reduced flame.
BRASS FISHTAIL BURNER TIPSfor combination Splicing/TippingTorch No. 2 (1/4”- 27 Thread)
TIPPINGTIPPING TORCH NO. 3with #228 oblong “fishtail” brassburners for tipping off tubes up to 6mm diameter. May also be used for splicing tubes up to 10mm.
BRASS FISHTAIL BURNER TIPSfor Tipping Torch No. 3 (1/4”- 27 Thread)
BRASS ROUND BURNER TIPSfor Tipping Torch No. 3 (1/4”- 27 Thread)
TIPPINGNO. 500 TIPPING TORCHwith round burners for tipping off tubesup to 6mm diameter. May also be usedfor splicing tubes up to 10mm. Replace-able stainless steel tips enable the torch body to be reused indefinitely.
STAINLESS STEEL ROUND BURNER TIPSfor No. 500 Tipping Torch (1/4” MPT)
COMPONENTS COMMON TO ALL EGL HAND TORCHESNEEDLE VALVE, 1/8”44-50 1/8” MIXER
HAND TORCHES
N or A 650600
81-N or A 665000
228-N 650700228-A 650200
228-N 666000228-A 665500
N 650800A 650300
228-N 666000228-A 665500
100ST-N or A 667540
100-N or A 650970
100-N or A 667545
682000680000
2”
1-7/8”
1-1/4”
1-5/8”
1/4”-271/4”-27ThrThreadead
1/4”-271/4”-27ThrThreadead
TTororch No. 3ch No. 3
1/4” MPT1/4” MPT
1/4” MPT1/4” MPT
No. 500 TNo. 500 Tororchch
TTororch No. 2ch No. 2
TTororch No. 1ch No. 1
Mixer 680000Mixer 680000
ECONOMIZER
14
R-4 SERIES:92 CFM/60 Hz (74 CFM/50Hz), 52” H2O maximumpressure, operating on 115/208-230V, 1 HP: 1 Phase Model(Blower and motor only) ......................................................722848
1 Phase Model complete with inlet filter, muffler,pressure relief valve, pressure gauge and T-adapter..............7228803 Phase Model (Blower and Motor only)................................7228503 Phase Model complete with inlet filter, muffler,pressure relief valve, pressure gauge and T-adapter..............722882
R-5 SERIES:160 CFM/60 Hz (133 CFM/50 Hz), 50”/47” H2O maximumpressure, operating on 190/220-380-415V, 1 Phase, 2.5 HP:(Blower and motor only) ......................................................7228101 Phase Model complete with inlet filter, muffler,pressure relief valve, pressure gauge and T-adapter..............7228203 Phase Model (Blower and Motor only)................................7228123 Phase Model complete with inlet filter, muffler,pressure relief valve, pressure gauge and T-adapter..............722822Inlet Filter............................................................................722920Muffler................................................................................722930Pressure Relief Valve ..........................................................722950
R-4 and R-5 Series high-efficiency regenerativeblowers are oil-less, lowmaintenance, and ruggedlyconstructed with totallyenclosed fan-cooled motor-mounted designs.
BOMBARDERTRANSFORMERS
15 KVA Bombarder Transformers are suitable for use with all applications, and aregenerally the recommended choice for this reason.
22 KVA models are best suited for large scale, full-time production shops processing15-25mm tubing and using primarily 60-120 milliamp electrodes.
The EGL model 4600 variable-controlled choke is a DC reactance devise using a dialVariac. When used in conjunction with the EGL milliamp gauge (item no. 733300) themodel 4600 will provide precise control of bombarding levels combined with ease ofoperation and reliability.
BOMBARDER TRANSFORMER SPECIFICATIONS
MODELPRIMARY
VOLT1
PRIMARYNOMINAL
AMPS
PRIMARYPEAKAMPS
MINIMUMBREAKER
SIZE2
MINIMUMWIRESIZE3
SECONDARYVOLTS
NOMINAL/PEAK
AVERAGENOMINAL
mAPEAKmA
BOMBARDERDUTY
CYCLES15 KVA22 KVA
240240
10-8010-80
100100
100A100A
#2#2
26KV/24KV26KV/24KV
800800
15001750
100%100%
*The use of an EGL Bombarding Milliamp Gauge is recommended.
Notes: 1 - 208V services will draw approximately 10% more.2 - Minimum 100 Amp service recommended.3 - Minimum size included for wire and breaker suitable for most applications. For heavy, continuous production, use next-size-larger wire and breaker minimums.
CHOKES, BOMBARDERS & VARIACS
MODEL CHOKE ONLY BOMBARDER ONLY VARIAC ONLY CHOKE COMPLETE(Includes Choke & Variac)
BOMBARDERCOMPLETE
(Includes Choke,Bombarder & Variac)
15 KVA 220V/60 Hz15 KVA 220V/50 Hz22 KVA 220V/60 Hz22 KVA 220V/50 Hz*
718615718515718622718522
716615716515716622716522
718815718806718815718806
718620718630718660718525
716435718550718445718500
Bombarder Contactor (2-pole, 90 amp) includes main contactor assembly, metal enclosure and auxiliary contactor ..........................718830
Contactor Foot Switch (10 amp, 550V), a heavy-duty single-pole, double-throw foot switch with guard. A 14 gauge SJ electrical cord with ground required for installation (not included) ................................................................................................718835
*Special order
15
EZ READ GAS PRESSUREGAUGE (MANOMETER)The EGL EZ Read gaugeprovides accurate readings ofrare gases during neon tube orcold cathode filling. Accuracy of.1mm is possible.The EGL EZ Read gauge uses a
greaselessstopcockassemblydesigned toprevent thebutyl oil fromascending intothe manifoldsystem shouldsuddenpressure beapplied to theliquid duringoperation.
Connection is made with a glasscompression fitting that willaccommodate 12 to 15mmtubing. Each gauge is suppliedwith a calibrated scale andrequired gauge oil.EZ Read Gauge Complete - with stand. Part No. ....733600EZ Read Gauge Glass OnlyPart No. ......................733625Red B-phthalate Oil, 2oz.Part No. ......................730500
DIGITAL TEMPERATUREGAUGEDesigned for the neon bombard-ing process, this gauge providesaccurate Fahrenheit or Celsiusreadings in a range of 32°F-650°F (0-325°C) and features alarge, clear, 3/4” LCD, enabling
the operator to concentrate fullyon the bombarding of units. Ahigh quality durable probe madefor neon tubing (8-20mm diame-ter) with a foil thermocouple(replaceable) provides accuratetemperature readings.
The unit is housed in a durableplastic case and comesequipped with one nine-volt bat-tery for approximately 180hours of operation.Part No. ......................734200Replacement ThermocouplePart No. ......................734210
MAXI-VACTM SINGLE-STAGEBOROSILICATE OILDIFFUSION PUMPThis efficient oil diffusion pumpprovides pressures of 1 x 10-5
Torr at a pumping rate ofapproximately 8-10 liters/second(up to 600 liters/minute) depend-ing on backing pump. Thispump has no moving parts foreasy maintenance.
The Diffusion Pump Intake Portis 25mm diameter with a com-pression fitting that will accom-modate 15 to 18mm glass. TheForeline (Exhaust) port is 18mmdiameter.
Complete system including:Vertical support rod with base,pancake heater mantle withsupport, clamp to secure pump,heater controller, and finestquality diffusion pump oil.120V/60 Hz modelPart No. ......................734300220V/50 Hz model completePart No. ......................734301Diffusion pump glass onlyPart No. ......................734305Pancake heater mantle120V/60Hz Part No. ....734320Pancake heater mantle220V/50Hz Part No. ....734321Heater controller 120V/60HzPart No. ......................734315Heater controller 220V/50HzPart No. ......................734316Pancake heater support ringPart No. ......................713055Vertical support rod with basePart No. ......................713050Diffusion pump clampPart No. ......................71306050ml clear diffusion pump oilPart No. ......................735010
EGL MILLIAMP GAUGEThe EGL Milliamp Gauge pro-vides a reading of 0-1000 MA(1AMP), and can be wired in aseries to indicate the precise
powerleveldrawnfrom thebombard-ing trans-former.Thegauge is
simple to install and operates onany bombarder.Part No. ......................733300
ANALOG VACUUM GAUGEThe VT6 Analog Vacuum Gaugeis a rugged reliable thermocou-ple-type instrument. Available inthe 0-1000 micron range.
The gauge features a large easy-to-read analog display with 1micron divisions in the 0-10micron range. The gauge tubes
have a 1/8” male NPT thread.The gauge is supplied with an 8’cable for the gauge tube.
Complete unit includes gaugetube and grounding unit.120/60Hz Part No. ......735340220/50Hz Part No. ......735341Gauge only120/60Hz Part No. ......735350220/50Hz Part No. ......735351Gauge Tube(not shown) Part No. ....735360
HIGH VACUUM HOSE FORVACUUM PUMPINGSYSTEMS1/8” ID x 1/8” Wall, latexPart No........................6707505/8” ID x 1/2” Wall, latexPart No. ......................7230001/2” ID x 1/2” Wall, latexPart No. ......................7235003/4” ID x 1/2” Wall, pure gumPart No. ......................7240003/8” ID x 3/8” Wall, pure gumPart No. ......................7245001/2” ID x 3/8” Wall, pure gumPart No. ......................725000
*EGL vacuum gauges installed on manifolds other than EGL MaxiVacTM systemswill require a metal to glass compression fitting for connection. Call for details.
DIGITAL PIRANI VACUUM GAUGEThe TM-20 is a single stationPirani Gauge. It can displaypressure in Torr, Microns, M-Bar,or Pascal units using a largeeasy-to-read LCD display withdigital and bar graph readout.Measurement range is from 760Torr (ATM) down to 1x10 range(1 Micron). Complete gauge
includes aTR211sensorwith 1/8”NPT fittingand 10feet of sen-sor cable.The gaugecan be
bench or panel-mounted and ishoused in a 1/4 inch case.Part No.........................735370
EGL ANALOG CAPSULEFILL PRESSURE GAUGEThe EGL Analog Capsule Fill
Pressure/TorrGauge featuresa four-incheasy-to-readface for pre-cise indicationof mm Hg/Torrfrom 0 to 50 in1-unit gradua-tions. It has a1/4” M-NPTconnection and
can be fitted to virtually anymanifold using the 19mm glasscompression adapter. Fill GaugeComplete (includes adapter andsupport legs)*Part No. ..733205Fill Gauge with Adapter(legs not included)* ......733202Fill Gauge Only ..............733200*Adapter must be used whenattaching to a glass manifold.
NORMAL LATEX TUBING- for gas and air supply linesBlow Hose1/8” ID x 1/16” WallPart No.........................669500Hand Torch Hose1/4” ID x 1/16” WallPart No.........................6690001/4” ID x 1/8” WallPart No.........................669400Crossfire Hose3/8” ID x 3/32” WallPart No.........................670000Ribbon Burner Hose1/2” ID x 1/8” WallPart No.........................670500
RK212SJ (left) RK212ST (right)
16
EGL MERCURY INJECTORThe EGL Mercury Injectorimproves operator safety anddispensing accuracy. Pressing abutton advances a plunger,dispensing 10 microliters(100mg) of mercury, equivalentto a ball 2mm in diameter--thecorrect amount for most argon-filled “neon” tubes.
The reservoir has a 500 micro-liter capacity, good for 50applications. Marked in 10microliter increments, it enablesthe user to calibrate total volumeby setting the plunger position.The injector dispensing tube endis blunt, reducing the dangerassociated with sharp medicalsyringes commonly employed to
inject mercury. In addition, itoffers the repeatable accuracyneeded to prevent over-fillingthat causes mercury condensa-tion and tube darkening, andunder-filling that reduces tubebrightness.
Part No. ......................732000
#119 VACUUM OIL(1 Liter) Part No. ..........735200Incorporates two essential highvacuum characteristics: lowvapor pressure which does notmaterially increase at tempera-tures up to 50°C; and viscositysufficiently low for use at 15°C. #200 VACUUM OIL(1 Liter) Part No. ..........735210Superior vacuum oil to #119that offers lower vapor pressure,less backstreaming and higherflash point temperature.
FLUSHING OIL(1 gal.) Part No.............735300Swift, safe removal of harmfulsediment and contaminationfrom high vacuum pumps isaccomplished by using thisspecially developed oil. One ortwo flushings clean accumulatedresidues and protect the pump.Its use considerably improveshigh vacuum production. Thepump can be refilled withoperating oil immediately afterflushing.
#43 VACUUM PUMP OIL(1 gal.) Part No.............735100A custom blended generalpurpose vacuum pump oilutilizing advanced feedstocks.This economical alternative tomolecularly distilled fluidspossesses a vapor pressure of2x10-4 torr at a temperature of25°C.
All EGL vacuum pumps are 2-stage rotary vane direct-drive pumps which reach an ultimate vacuum of 1x10-4 mbar and have ISO-KF-25 flangeson inlets and outlets. All have anti-suckback valves and are equipped with Pneurop flanges, hose nipple, centering ring, O-ring, and clamp.
VACUUM PUMP SPECIFICATIONS
SERIES A32
SERIES A70
SERIES A107
Free Air DisplacementCFM(L/min)3.2 (90)Oil Capacity Quarts
Motor Rating (hp/rpm) Weight (Approx.) lbs (kg)
Voltage/cycles
EGL Part NumberMist Eliminator (optional)
3.2 (90)0.825
1/3-180048 (22)
110V/50/60Hz and220V/50/60Hz
721300720915
7.0 (195)1.0
1/2-180055 (24.5)
110V/50/60Hz and220V/50/60Hz
721400720915
10.7 (305)1.0
3/4-180063 (28.6)
110V/50/60Hz and220V/50/60Hz
721200720915
EGL REPLACEMENT OILS
COLD CATHODE HOUSINGSCold Cathode Housings are rated @ 7500V to ground. Milled out of stock material,not from a mold. Wire strip gauge is imprinted on unit. Can be recessed or exter-nally mounted. Stainless steel mounting screw for GTO or Ballast wire. Featuressolid brass receptacles for electrodes. User friendly (wiring and mounting abilities).RK212SJ (Jumper) ....................................................................................662150RK212ST (Terminal)....................................................................................662100
COLD CATHODE HOUSING DIMENSIONS (INCHES)
SOCKET TYPE RK212SJJUMPER
RK212STTERMINAL
Center to Center ofElectrode w/SPCR
Housing FixtureSize
Lamp Toll +/-Socket Heightfrom SurfaceInterior DepthInterior WidthInterior Length
Overall Flange WidthOverall Flange Length
Flange ThicknessOverall Body WidthOverall Body Length
Mounting HoleCenters
Height to Connection
1 1/4
2”x4”x2.5”metal receptacle
1/8.880
1 1/27/8
2 7/322 9/324 1/23/81.374 1/23 1/4
1 1/4
1 1/4
2”x4”x2.5” metal receptacle
1/8.880
1 1/27/8
2 1/82 9/324 1/23/81.454 1/23 1/4
1 1/4
Cross Section
17
ULTRAVIOLET COLORCHECKERA compact, lightweight 4 wattUV lamp for checking the colorof phosphor coated tubing. TheEGL color checker is housed ina high quality, impact-resistantABS plastic case that resists fad-ing, peeling, and cracking fromexposure to heat or chemicals.
Measures 6-1/2” L x 1-1/4” W x1-3/4” H, Weight 8 oz., anduses 4 AA 1.5 volt batteries (not included) Part No. ......................763000
DIGITAL MAP MEASUREUsed for measuring requiredlengths of glass tubing byfollowing the exact contours of ato scale working drawing of theintended design. Features 91imperial and metric scales. Map Measure Part No.........................753005
CORKSDiameter Part No.8mm............................7555009mm............................75600010mm..........................75650011mm..........................75700012mm..........................75750013mm..........................75800015mm..........................758500
BLACK RUBBER CORKSDiameter Part No.12mm..........................76000915mm..........................760010
GLASS FILESFor quick cuts of glass tubing todesired lengths; files are carbonsteel, 8” overall length.Part No. ......................760500
LEAD GLASS STOPCOCKSMADE IN USAEGL Stopcocks are used byvirtually all neon shops in theUnited States and in many shopsoverseas.
Diameter (mm) Part No.2..................................7355004..................................7360006..................................7365008..................................73700010................................737500
SPARK COIL110 or 230 Volt high-frequencygenerator used for detectingleaks in a tube while processing;BD 10A is a standard productfor lab use; also available is BD20A for more specialized uses,with its finer probe tip.
BD 10A Spark coil115V Part No. ..............740500BD 10AS Spark coil115V Part No. ..............740510BD 10AV Spark coil230V Part No. ..............740520BD 10ASV Spark coil230V Part No. ..............740515BD 20A Spark coil115V Part No. ..............740600BD 20V Spark coil230V Part No. ..............740610Models with an “S” are equipped with on/offswitches.
C.L. DESIGNER® CASEThe 13” x16” x 6” briefcase canbe used to illuminate two “U”shaped neon tubes to provide avisual comparison of each tube’srelative effectiveness behinddifferent colors of plastic. It canbe used to simulate a channelletter application, as well ascove and exposed neon lighting. Part No. ...................... 768805
BOMBARDING MICAPart No. ......................761500
MERCURY*Triple-distilled EGL mercury is thepurest available anywhere.Packed in .9 lb. glass bottles.Part No. ......................762001
EGL PORTABLE SLIMLINETUBE TESTERBattery powered high-frequencygenerator for testing pumpedneon tubes and fluorescentlamps, operates on 4 AAbatteries. Tube being tested willilluminate in a pulsating manner if“good”. Includes leather case.6-7/8” long x 1-1/2” wide x 3/4” deepPart No. ......................741200
SWIVELS3/16” Swivels are most com-monly used for neon tubing; 1/4”are best suitedfor cold cath-ode work(18mm or larg-er).1/4” RAE(Right Angle)One-sided SwivelPart No. ......................6715003/16” RAE (Right Angle)Double SwivelPart No. ......................6720003/16” RAE (Right Angle)One-sided SwivelPart No. ......................6721001/4” x 1-1/2” Straight SwivelPart No. ......................6725001/4” x 3” Straight SwivelPart No. ......................673000
ELECTRODE HOLDER
Electrode holder keeps fingerscool while splicing electrodes toglass.Part No. ......................683000
ELECTRONIC MILLIAMP METERThe Digital mA meter wasdesigned to measure true RMScurrent on core and coil andelectronic transformers whenplaced in a series connection ofmultiple tubes. It is compact,convenient, requires nobatteries, has a frequency rangeof 50 to 50,000hz, and canmeasure from 3 to 200mA/AC.The meter readings should betaken with the meter placed inseries in the neon circuit, ideallyat mid-point. Part No. ......................645300
BRASS ELECTRODE CAPSAvailable Sizes: Part No.12mm Short ................75450015mm Short ................75400015mm Long ................75350019mm Long ................75500015mm ElectrodeButtons ........................753100
*Hazardous Material shipping restrictions may apply.
18
GLASS TUBE SUPPORTSDescription Part No.1-3/4” Brass 2-PieceBase ............................6151251-3/4” Brass 2-Piece Base w/wire ................6151501-3/4” Aluminum Single Piece Base ..................6151751-3/4” Aluminum SinglePiece Base w/wire ........6151851-3/4” Brass Single Piece Base ..................6151001-3/4” Brass SinglePiece Base w/wire ........6151051-3/4” SL (8mm) Brass2-Piece Base ................6151901-3/4” SL (8mm) Brass2-Piece Base w/wire ....6151953-1/2” Brass2-Piece Base ................6152003-1/2” Brass 2-Piece Base w/wire ....615205Metal Extension Post ....616100
GRAB-IT™ WIRELESSSUPPORTS FOR NEON TUBINGSecure grip without wire twists.Glass tubing snaps firmly into theresilient “C” clip which encirclesapproximately 75% of the tube,providing a secure grip andeliminating the need for unsightlywire twists and associated laborcosts. Light shines through thetransparent clips, making themvirtually invisible.
GRAB-IT™ tube supports arespring-loaded with 1/8” travel toabsorb shock and compensatefor tubing irregularities, giving theentire sign a protective suspen-sion. All supports provide a 1-3/4” stand-off height to accom-modate “double-back” tubethickness.
Tough polycarbonate plastic with-stands extreme conditions.Resistance to high impact,corrosion, and wide temperaturevariations permit utilization of
these tube supports in virtuallyany interior or exteriorenvironment. 1” x 1/2” mountingbase flange accommodates anumber eight screw, or can beglued to any surface using sili-cone or any appropriate adhesive.
Available in 9,10,12, 13, and15mm sizes. All sizes are clearlymarked on each tube support,packaged 100 per bag. Giveyour signs a clean, clear look withGRAB-IT™ tube supports, thenewest to EGL’s line of glass andmetal tube supports.
Diameter (mm) Part No.9 (clear) ......................6141099 (black base) ..............61420910 (clear) ....................61411010 (black base) ............61421012 (clear) ....................61411212 (black base) ............61421213 (clear) ....................61411313 (black base) ............61421315 (clear) ....................61411515 (black base) ............614215
NEON TUBINGDISPLAY BRIEFCASEThis self-contained, portablesales kit saves time,increases sales, and ensurescustomer satisfaction withtubing color selections. Thelockable slimline briefcase issuited to any businesssetting, and holds 20 neontubes, up to four of whichcan be illuminatedsimultaneously todemonstrate colorcombinations.
Standard tubing colors are:• 8300 White• 6500 Snowhite• E40 Blue• Horizon Blue• Bromo Blue Coated• E12 Turquoise• Purple• Coral Pink• Violet II• Flamingo• Ruby Red Coated• Clear Brite Yellow• Clear Gold• Seacrest• E10 Green• Apple Green• Emerald Green Coated• Casino Gold• Tropic Green• Tropic Yellow
All standard tubes are 12mmin diameter and feature EGLelectrodes for maximumbrilliance, clarity, andlongevity.Display BriefcasePart No. ..................765800
Cost-Saving Length
The right time to use an EGL BigBoyTM is any time you can avoidusing two shorter lamps of equallength. By reducing the numberof lamp ends (lumen loss) morelight per-foot is achieved withoutunsightly center racewayshadows and with reduced laborand material costs: fewerballasts, fewer sockets, and muchless wiring.
Standard Convenience
Use EGL Big Boys as you wouldany other straight high-outputlamp. All sign ballast makers sup-ply ballasts that carry up to fourlamps, 9, 9-3/4, or 10 feet.
Standard colors: Coolwhite andDaylight - 3 sizes in T12 diame-ter: F108, F117, F120.
BIG BOY™ HIGH OUTPUT LAMPS
9, 9-3/4, AND 10-FOOT HIGH-OUTPUT LAMPS
COLORNOMINAL
LAMPWATTS
LENGTHSOCKET TO
SOCKET(Inches)
12-PACKWT.APP.(Lbs.)
LAMP CODE EGLPART NO.
COOL WHITE124135138
105-3/16”114-3/16”117-3/16”
232525
108T12HO/CW117T12HO/CW120T12HO/CW
451108466117481120
DAYLITE124135138
105-3/16”114-3/16”117-3/16”
232525
108T12HO/D117T12HO/D120T12HO/D
456108471117486120
19
MANIFOLD AND COMPLETEPUMPING SYSTEMFOR NEON TUBING
SUPERIOR DESIGN AND CONSTRUCTION PROVIDE THEFASTEST, MOST CONSISTENTPUMPING SPEEDS, AND THEBRIGHTEST, CLEANEST NEONTUBES ATTAINABLE
The MAXI-VAC™ manifold virtually eliminatesthe leakage, breakage, contamination, anddowntime common to older systems byeliminating the components that cause it.Gone forever are the grease-type stopcocks,numerous connections, and maze of fragileglass tubing which result in wasted repairtime and, still worse, finished neon productsof inconsistent quality.
LARGE BORE, GREASE-FREE STOPCOCKS
The MAXI-VAC™ manifold employs the fewestnumber of stopcocks to minimize the possi-bility of leakage. The two 25mm diametermain stopcocks are larger than on any otherpumping manifold, providing the highestpumping rates. The stopcocks are machinedfrom durable Teflon®, and feature a newcoarse thread design that provides long life,fast actuation, and easy removal and re-threading for cleaning. The stopcocks arealso grease-free, eliminating the contamina-tion problem of grease-type stopcocks 100percent.
HEAVY WALL, LARGE DIAMETERMANIFOLD TUBING
Short lengths of heavy wall 50mm diameterborosilicate tubing are welded in a compactconfiguration which has the fewest possiblenumber of connections, then annealed toremove strain. The result is an extremelystrong assembly that provides the highestpossible flow rates, maximum vacuumintegrity, minimal gas waste, and the easiestinterior access for cleaning.
COMPLETE SYSTEMS120V60HZ**
220V50HZ**
SYSTEM I Includes: Borosilicate Glass Manifold completewith sturdy base, 0-50MM HG/TORR fill gauge, highlyaccurate vacuum gauge complete with gaugeadapter/stopcock, newly designed oil diffusion pump (formaximum pumping performance) complete with heaterand ALL necessary mounting hardware.Complete system for gas flasks ......................................Complete system for gas tanks* ....................................
SYSTEM II includes: Same as System I, including SeriesA70 or equivalent vacuum pump with stainless steel flexhose and adapter.Complete system for gas flasks w/Series A70 vacuumpump..............................................................................Complete system for gas tanks* w/Series A70 vacuumpump ............................................................................
PART NO.
716000716010A
716025
716027A
PART NO.
716005716015A
716026
716028A
COMPLETE SYSTEMS120V60HZ**
220V50HZ**
SYSTEM III includes: Same as System II, including choice of KVA bombarder & variable output transformerchoke & milliamp gauge.Complete system for gas flasks w/Series A70 vacuum pump and 15KVA bombarder and choke...........................Complete system for gas tanks* w/Series A70 vacuumpump and 15KVA bombarder and choke...........................Complete system for gas flasks w/Series A70 vacuumpump and 22KVA bombarder and choke...........................Complete system for gas tanks* w/Series A70 vacuumpump and 22 KVA bombarder and choke..........................
SYSTEM IV (for gas tanks only) includes: Same as System III, plus second Series A70 or equivalent vacuumpump with stainless steel flexible hose and adapter, twogas tank systems, EGL digital temperature gauge, set ofreplacement “O” rings, additional 50cc bottle of cleardiffusion pump oil, and 100 pair of 15CL Advantage electrodes. Complete system for gas tanks* w/2 Series A70 vacuum pump and 22 KVA bombarder and choke..............
PART NO.
716060
716062A
716078
716080A
716164A
PART NO.
716061
716063A
***
***
***
GAS INLET VALVE(ROBBINS VALVE)Part No. 733000
MAIN STOPCOCKSPart No. 735460
CONTROLLER FORDIFFUSION PUMP HEATER120V/60Hz...Part No. 734315220V/50Hz...Part No. 734316
GLASS DIFFUSION PUMP120V/60Hz...Part No. 734300220V/50Hz...Part No. 734301
DIRECT DRIVE PUMP(EGL - A70 - Set up as roughing pump)Part No. 721400
COMPLETE MAXI-VACTM MXV-50 “SYSTEM II” PUMPING SYSTEM FOR GAS TANKS with the following options: Second “Y” piece, two gas transfersystems and tanks, and second vacuum pump.† Stand not available from EGL†† Most components sold separately
FILLING GAUGEPart No. 733202
ANALOG VACUUM GAUGE120V/60Hz...Part No. 735340220V/50Hz...Part No. 735341
GAS INLET VALVE(ROBBINS VALVE).. Part No. 733000
“Y” FITTINGPart No. 735405
HIGH STRENGTH SUPPORT SYSTEM ANDMOUNTING BOARD
FLEXIBLE STAINLESSSTEEL CONNECTIONPart No. 735420
DIRECT DRIVE PUMP(EGL - A70 - Operates in conjunction withdiffusion pump)Part No. 721400
“Y” FITTINGPart No. 735405
NOTES:*Gas Transfer System included with SYSTEM IV only.**120V refers to all electrical components except bombarders and chokes (Both are 220V primary).***Special order only for 220V/50 Hz.