ISEMP Airbus Endowed Chair for

Cutting-edge Forum on Additive ManufacturingFocus: Process Control & Part Quality Assurance

Presentations and Exhibitionfrom February 17th to 18th

at Airbus in Bremen

17th - 18th

F E B2016

2 nd In te rna t iona l Sympos ium M a t e r i a l s S c i e n c e a n d Te c h n o l o g y o f A d d i t i v e M a n u f a c t u r i n g

17

th-1

8thFEB

2016

11:30 - 13:00 Registration and LunchWednesday Opening and Keynotes

02/1713:00 - 13:20 Welcome to Airbus Site Bremen

Dr. André Walter, Vice-President, CEO Airbus Bremen, Germany13:20 - 13:40 Introduction: Material and Part Quality Assurance as a Key-factor for Additive Manufacturing

Prof. Dr.-Ing. Vasily Ploshikhin, Airbus endowed chair ISEMP, University of Bremen, Germany13:40 - 14:05 Keynote: Additive Manufacturing – Present and Future in Airbus

Dr. Claudio Dalle Donne, Vice-President, Airbus Bremen, Germany14:05 - 14:30 Keynote: From Laboratory to Industrial Manufacturing: Additive Manufacturing for Aerostructures

Dr. Joachim Schmidt, Premium AEROTEC GmbH, Germany14:30 - 15:00 Networking and Exhibition BreakSession 1a Process Monitoring & Part Quality Assurance

Chairman: Dr. Joachim Schmidt, Premium AEROTEC GmbH, Germany

15:00 - 15:20Process Chain Optimization and Quality Assurance for the Additive Manufacturing of Aero Engine PartsAlexander Ladewig, MTU Aero Engines AG, Germany

15:20 - 15:40 Achieving Micrometer Level - High Resolution Real-time Process Monitoring in Three DimensionsMarie-Christin Ebert, Concept Laser GmbH, Germany

15:40 - 16:00 Excellent Processing – Building Blocks for Reliable Part QualityDr. Hannes Horst, EOS GmbH, Germany

16:00 - 16:20 Quality Assurance System for Selective Laser Melting (SLM®)Birk Hoppe, SLM Solutions GmbH, Germany

16:20 - 16:50 Networking and Exhibition BreakSession 1b Process Monitoring & Part Quality Assurance

Chairman: Dr. Claudio Dalle Donne, Germany16:50 - 17:10 Process and Quality Supervision for EBM Production Applications

Dr. Ulric Ljungblad, ARCAM AB, Sweden

17:10 - 17:30Part Qualification for Discrete and Volume 3D printed Titanium Products based on Validated Process ChainsTom De Bruyne, 3DSYSTEMS, Belgium

17:30 - 17:50 Continuous Real Time Process Monitoring – From Challenges to SolutionsUlrich Thombansen, Fraunhofer ILT, Aachen, Germany

17:50 - 18:10 Additive Manufacturing Control Platform (AMCP) – Master Your Machine Behavior. Control It. InnovateDieter Ghysbrecht, Materialise, Belgium

19:00 - 22:00 Get-together / Dinner (Atlantic Hotel Bremen Airport)

Thursday Second Day Keynotes02/18

08:30 - 08:50 Airbus Bremen ALM Platform PresentationDr. Hubertus Lohner, Airbus Bremen, Germany

08:50 - 09:15 Keynote: Industrialization of Additive Manufacturing for Space Parts - Hurdles and ChallengesDr. Steffen Beyer, Airbus Defence and Space GmbH, Ottobrunn, Germany

09:15 - 09:40 Keynote: ESA Perspective on Additive Manufacturing for Space ApplicationsDr. Tommaso Ghidini, European Space Agency, Netherlands

09:40 - 10:10 Networking and Exhibition BreakSession 2 AM Titanium Alloys

Chairman: Dr. Hubertus Lohner, Airbus Bremen, Germany10:10 - 10:35 Keynote: Laser-assisted Direct Metal Deposition of Titanium Alloys and Titanium Aluminides

Prof. Dr. Christoph Leyens, Fraunhofer IWS, Dresden, Germany10:35 - 10:55 Comparison Between EBM and LBM Process for Liquid Propulsion Engine Parts

Dr. Raphael Salapete, Safran group, France10:55 - 11:15 Material Aspects within the Process Chain for Serial Production of Ti-compounds for Aerospace

ApplicationsDr.-Ing. Kai Schimanski, Premium AEROTEC GmbH, Germany

11:15 - 11:35 Technical Overview and Status of the ALM Maturation Program “ALM ISCAR”Sebastian Kébreau, Airbus Defence and Space, Bremen, Germany

11:35 - 12:35 Lunch and ExhibitionSession 3 AM Aluminum Alloys

Chairman: Dr. Steffen Beyer, Airbus Defence and Space12:35 - 13:00 Keynote: Process Robustness & Reliability in Laser based Powderbed Melting – a Key

Performance Indicator for Assured High Quality Metallic 3D-printing Frank Palm, Airbus Group Innovations, Ottobrunn, Germany

13:00 - 13:20 Manufacturing AM Aluminium Parts – Challenges for a Service Provider Andreas Berkau, CEO, citim GmbH, Barleben, Germany

13:20 - 13:40 In-situ Modified Al-alloys by 3d-printing Prof. Dr. Wolfgang Kollenberg, CEO, WZR ceramic solutions GmbH, Rheinbach, Germany

13:40 - 14:00 Processability of Aluminium Copper Wrought-Alloys via Laser Beam MeltingMichael Karg, LPT, University Erlangen-Nürnberg, Germany

14:00 - 14:30 Networking and Exhibition BreakSession 4 AM Ni-based Alloys

Chairman: Sebastian Kébreau, Airbus Defence and Space, Bremen, Germany14:30 - 14:55 Keynote: Additive Manufacturing for Ni-base Jet Engine Applications

Dr. Inga Stoll, MTU Aero Engines AG, München, Germany14:55 - 15:15 Opportunities & Challenges using Additive Manufacturing for Large Gas Turbine Manufacturing

Dr. Michael Ott, Siemens AG, Mülheim an der Ruhr, Germany 15:15 - 15:35 Processing of High-gamma Prime Nickel-based Superalloys with High-temperature SLM

Jeroen Risse, Fraunhofer ILT Aachen, Germany15:35 - 16:00 Closing remarks / Symposium End

Prof. Dr.-Ing. Vasily Ploshikhin, Airbus endowed chair ISEMP, University of Bremen, Germany

16:00 - 17:30 Guided TourExcursion to Airbus Defence and Space Site Bremen1

7th-1

8thFEB

2016

2 nd In te rna t iona l Sympos ium M a t e r i a l s S c i e n c e a n d Te c h n o l o g y o f A d d i t i v e M a n u f a c t u r i n gProgram

Participation FeeUniversity: 390 € excl. VATIndustry: 490 € excl. VAT

Exhibitor University 4.5 m2: 540 € excl. VATExhibitor Industry 4.5 m2: 640 € excl. VATExhibitor Premium 9.0 m2: 790 € excl. VAT

Including conference, catering, refresh-ments, conference dinner, guided tour of Airbus Defence and Space (limited number of participants).

RegistrationOnline registration accepted until Feb 10th.

LocationAstrium Conference CenterAirbus Allee 128199 Bremen, Germany

Tram station (line 6): Bremen Airport

AccomodationThere is a special arrangement with Atlan-tic Hotel Bremen Airport by booking for „Universität Bremen - ISEMP - MSTAM“.

Organization & ContactSymposium Chairman:Prof. Dr.-Ing. Vasily PloshikhinAirbus Endowed Chair for Integrative Simulation and Engineering of Materials and Processes (ISEMP / University of Bremen)

Coordination:Christian Kober

Phone: +49 421 218-62327E-Mail: registration@isemp.de

Conditions of ParticipationAfter successful registration a con�rmation e-mail will be sent to you. An e-mail inclu-ding the invoice will be sent separately. Cancellation until February 12th is without charges. In case of later cancellation or nonattendance full payment is required. Participation of a substitute person is pos-sible after contacting the committee. The organisational committee reserves the right to change the program.

For further information visit:

A1A28

A27

B75B6n

B6

A281Bremen

B75

B6

A281

www.bccms.uni-bremen.de/registration

gogreen

paperlessregistration

www.bccms.uni-bremen.de/mstam

2 nd In te rna t iona l Sympos ium M a t e r i a l s S c i e n c e a n d Te c h n o l o g y o f A d d i t i v e M a n u f a c t u r i n g02/17 - 02/18

17th - 18th

F E B2016