NAWCAD Lakehurst Industry Day - Harry...

NAVAIR Public Release 2019-894

Distribution Statement A -Approved for public release; distribution is unlimited.

NAWCAD Lakehurst

Industry Day30 October 2019

Presented to: Lakehurst Small Business Roundtable



2019 Small Business

Information30 October 2019

Presented by: Dawn Chartier

3NAVAIR Public Release 2019-894


NAWCAD LAKEHURST TARGETS VS. ACTUALS

VOSB has no set target from DoD.

Data derived from FPDS-NG Small Business Achievements by Awarding Organization.

NAWCAD LKE

FY19 ACTUALS

NAWCAD LKE FY16 NAWCAD LKE FY17 NAWCAD LKE FY18 as of 30 SEP 19

Prime Contracting

Total Dollars 1,219,134,318$ 1,419,286,092$ 1,572,372,953$ 1,928,014,977$

Small Business 46.068% 40.690% 52.549% 50.905%

Target 48.000% 38.000% 38.000% 38.000%

Dollars 561,626,874$ 577,507,258$ 826,273,512$ 981,459,051$

SMALL DISADVANTAGED BUSINESS 6.968% 6.155% 9.337% 8.424%

Target 7.500% 7.000% 7.000% 7.000%

Dollars 84,951,383$ 87,356,900$ 146,809,703$ 162,407,736$

VETERAN-OWNED SB 8.348% 7.999% 8.062% 6.224%

Dollars 101,768,386$ 113,528,262$ 126,767,844$ 119,996,970$

SERVICE-DISABLED VETERAN-OWNED SB 2.361% 3.075% 2.751% 2.154%

Target 3.000% 3.000% 3.000% 2.750%

Dollars 28,781,505$ 43,645,226$ 43,262,821$ 41,535,330$

WOMAN-OWNED SB 8.117% 6.886% 10.067% 7.813%

Target 7.500% 8.0000% 7.0000% 7.0000%

Dollars 98,957,881$ 97,725,130$ 158,284,535$ 150,626,804$

HIST. UNDERUTILIZED BUSINESS ZONE SB 1.068% 0.537% 0.678% 0.603%

Target 3.000% 1.200% 1.000% 1.000%

Dollars 13,020,263$ 7,625,321$ 10,668,076$ 11,625,687$

76.6% of the actions available to Small Businesses were awarded to Small Businesses


Distribution Statement A -Approved for public release; distribution is unlimited.4

NAVAIR TARGETS VS. ACTUALS

VOSB has no set target from DoD.

Data derived from FPDS-NG Small Business Achievements by Awarding Organization.

NAVAIR

FY19 ACTUALS

NAVAIR FY16 NAVAIR FY17 NAVAIR FY18 as of 30 SEP 19

Prime Contracting

Total Dollars 20,467,395,290$ 30,875,799,390$ 27,900,703,687$ 21,866,421,711$

Small Business 8.205% 5.952% 7.515% 11.319%

Target 7.410% 6.000% $1.9B $1.9B

Dollars 1,679,406,657$ 1,837,669,853$ 2,096,813,564$ 2,475,062,660$

SMALL DISADVANTAGED BUSINESS 1.754% 1.080% 1.544% 2.249%

Target 2.500% 2.000% 0.950% 0.950%

Dollars 358,970,020$ 333,475,488$ 430,757,286$ 491,864,769$

VETERAN-OWNED SB 1.903% 1.453% 1.820% 2.700%

Dollars 389,458,715$ 448,702,274$ 507,920,097$ 590,476,567$

SERVICE-DISABLED VETERAN-OWNED SB 0.864% 0.812% 1.071% 1.414%

Target 1.250% 3.200% 0.670% 0.670%

Dollars 176,847,744$ 250,612,198$ 298,832,310$ 309,288,443$

WOMAN-OWNED SB 1.296% 0.902% 1.273% 1.510%

Target 1.750% 2.420% 0.850% 0.850%

Dollars 265,201,405$ 278,574,477$ 355,208,536$ 330,186,147$

HIST. UNDERUTILIZED BUSINESS ZONE SB 0.182% 0.063% 0.100% 0.247%

Target 0.500% 1.120% 0.100% 0.100%

Dollars 37,204,276$ 19,457,602$ 28,018,694$ 53,996,204$



FY19 SMALL BUSINESS OBLIGATIONS

FY19 Small Business Prime ContractsTotal NAVAIR = $2.5B $981.5M

$954M$870M - NAWCAD$302M

$237M

• MISSILES / FREEFALL WEAPONS

• WEAPON SYSTEM INTEGRATION

• ELECTRONIC WARFARE SYSTEMS

• LAND RANGE / SEA RANGE

• NON LETHAL WEAPONS

Weapons West Coast Hub

• MISSILES / FREEFALL WEAPONS

• WEAPON SYSTEM INTEGRATION

• ELECTRONIC WARFARE SYSTEMS

• LAND RANGE / SEA RANGE

• NON LETHAL WEAPONS

• Missiles / Freefall weapons

• Weapon System Integration

• Electronic Warfare Systems

• Land Range / Sea Range

• Non Lethal Weapons

NAVAIR HQ

NAVAL AIR WARFARE CENTER

FLEET READINESS CENTER

FRC Northwest

China LakeNAWC Weapons Div

Point MuguNAWC Weapons Div

FRC West

FRC Southwest

FRC West Pac

LakehurstNAWC Aircraft Div

Patuxent RiverNAVAIR HQ, PEOs,

NAWC Aircraft Div

FRC SEFAC

FRC

Mid-Atlantic

FRC East

FRC Southeast

OrlandoNAWC TSD

$84M- HQ

• AIR VEHICLES

• PROPULSION & POWER

• AVIONICS & SENSORS

• SHIP INTERFACE & SUPPORT SYSTEMS

• UAVS

• ATLANTIC TEST RANGE AND GROUND SYSTEMS TEST FACILITIES

• HUMAN PERFORMANCE / SIMULATOR SYSTEMS

Aircraft East Coast Hub



FBO Transition

All of the following info is tentative at this time.

See https://Beta.SAM.gov for updates/official

information

• FBO is transitioning to Beta.SAM.gov.

• Scheduled to happen weekend of 08 Nov.

• FBO.gov will no longer be available after 2000 07 Nov.

• Beta.SAM.gov expected to go live 0800 12 Nov.

https://beta.sam.gov/



FBO Transition

• System basically the same.

• Terminology will be a little different

• Do you need an account?

• Currently under FBO you do not, however under

Beta.SAM.gov that will depend.

• All functions currently available under FBO are supposed to

be available under Beta.SAM.gov.

• New feature: You can now save searches (PDF/Excel formats)

– I believe you may need an account to perform this function.

Learning Center: https://beta.sam.gov/help/new-to-sam

Includes FAQs, videos and tutorials about the system

https://beta.sam.gov/help/new-to-sam



China Lake and Point Mugu, CADerrick Hu, Deputy for Small [email protected](760) 939-2712

Orlando, FLLeslie Faircloth, Deputy for Small [email protected](407) 380-4043

Patuxent River, MDShelby Butler, [email protected] Butler, Deputy for Small [email protected](301) 757-9087

Lawrence (Larry) Butts, Deputy for Small [email protected](301) 757-5258Cynthia Thompson, Small Business [email protected]

Lakehurst, NJDawn Chartier, Deputy for Small [email protected](732) 323-2933

NAVAIR OSBP Contact Information

NAVAIR Headquarters Naval Air Warfare Center –Weapons Division

Naval Air Warfare Center –Aircraft Division

Naval Air Warfare Center –Training Systems Division

Naval Air Warfare Center -Aircraft Division

NAVAIR OSBP public web site

http://www.navair.navy.mil/osbp

mailto:[email protected]








Aircraft Launch and Recovery Equipment (ALRE) Department

Small Business Opportunities

30 October 2019

Presented by: Richard Epstein



Mission

• Provide life cycle management of all Aircraft Launch and Recovery Equipment (ALRE) and Marine Corps Expeditionary Airfield (EAF) equipment

Scope

• ~2250 deployed ALRE systems

• 55 ALRE Programs/Products

Note: NAWCAD Lakehurst ALRE Department supports PMA 251 ALRE Program Office

ALRE Mission and Scope



EXECUTIVE DIRECTOROFFICER IN CHARGE

CHIEF ENGINEER

ALRE Dept

Ford-Class Launch & Recovery Div

Visual Landing Aids Div

Information Systems Div

Launch & Recovery/EAF Div

Fleet Technical Services Div

Support Equipment Dept

Common/ Commercial Systems Div

PEO(A) PSE Div

PEO(T) PSE Div

PEO(U&W/JSF) PSE Div

Mission Operations & Integration Dept

Logistics & Maintenance

Integration Div

Engineering Integration Div

Digital Engr Div

Procurement Div

Prototype, Manufacturing &

Test Dept

SE & ALRE Test and Eval Div

Prototype & Manufacturing Div

Technical Ofc Resour/Ops Director

Site Ops Mgr Workforce Ops Mgr

Ofc of Gen Counsel/EEO/

Small Bus/CE

NAVAIRHQProcurement Group

NAWC/FRC Contracts Dept

NAWCAD SE & ALRE GROUPLakehurst



NAWCAD SE & ALRE GROUP (Lakehurst)Aircraft Launch & Recovery Equipment Department

ALRE Dept


AAG Sys Product Br

AAG EAS/CSA/DFS/ Barricade Br

AAG DCS/WMS Br

AAG PCS/PPS Br

EMALS Sys Product Br

EMALS Subsystems Br


Surveillance/AAS Optical Br

CVN Landing Aids Br

AAS/ACS Landing Aids Br

ACS Landing Aids GFE Br


ADMACS Mech/Network Br

ADMACS SW Dev/Infrastr Br

ALLE/ALLN & AAS ADMACS Br

Info Sys CM/Fleet Support Br

Wind Measurement Sys & LSODS Br

Launch, Recovery & EAF Div

MK-7 Br

ARC Br

Steam Catapults Br

AAS/ACS Launch, Recovery & AVCERT Br

EAF Br


ASIR SURFLANT Br

ASIR SURFPAC Br

CAFSU AIRLANT Br

CAFSU AIRPAC Br

EASU Br

24 Sep 2019



• Launch

• Recovery

• Visual Landing Aids

• Information Systems

• Expeditionary Airfields

Work Is Along Product Lines



• Design and Development

• Installation

• Field Support

• Maintenance

• Enhancement

Work Is Along Product Life Cycle



Disciplines:

• Systems Engineering

• Hardware

• Software

• Cyber Security

• Program Management

• Logistics

Tasks address:

• New design for new requirements

• Enhancements for changing requirements

• Obsolescence of HW and SW at all levels

• Service Life Management Program (SLMP)

• Cyber Vulnerabilities

Tasks Involve All Aspects of Work



• Steam Catapults

• Low Loss Launch Valve (LLLV)

• Integrated Catapult Control Stations (ICCS)

• Jet Blast Deflector (JBD)

• Electromagnetic Aircraft Launch System (EMALS)

Major Launch Products



• Mk 7 Arresting Gear

• Aircraft Recovery Control (ARC)

• Advanced Arresting Gear (AAG)

• Recovery Assist, Secure, & Traverse (RAST)

• Aircraft Ship Integrated Secure & Traverse (ASIST)

Major Recovery Products



• Vertical/Short Take-Off Landing-Optical Landing System (VSTOL/OLS)

• Improved Fresnel Lens Optical Landing System (IFLOLS)

• Manually Operated Visual Landing Aid System (MOVLAS)

• Long Range Line-up System (LRLS)

• Next Generation Visual Landing Aids (NGVLA)

Advanced Stabilized Glide Slope Indicator (ASGSI)

Advanced Flight Deck Lighting (AFDL)

Surveillance (ILARTS, HOSS, ALSS)

Major Visual Landing Aid Products



• Aviation Data Management and Control System (ADMACS)

Flight Deck Management System (FDMS)

Aviation Weapons Information Management

System (AWIMS)

• ADMACS for Amphibious Assault Ships (AAS)

• Wind Measurement System

Moriah Wind System (MWS)

Digital Wind System (DWS)

• Landing Signal Officer Display System (LSODS)

Major Info System Products



• Airfield Surfacing (matting)

• Aircraft Arresting Gear (M-31)

• Airfield lighting (Sustainment Lighting System)

• Terminal Guidance (FLOLS variant)

Major Expeditionary Airfield Products



• Product related support:

Independently developing or producing all or part of any system within the ALRE product line

• Services support:

Supporting the government in developing or maintaining any of the systems within ALRE

• Other types of support:

Alteration Installation Team and other installation support

Aviation and Facilities Certification support

Opportunities for Contracting



• Requirement Title: Mk 7 Arresting Gear Fluid Cooler

• Requirement Description: Design, Test, manufacture of prototype and potential follow-on production of newly designed Fluid Cooler

• Anticipated Quantity: 40

• Anticipated Contract Type: Firm Fixed Price, Full and Open

• Prototype Design Source selection: 1st Quarter FY20;

• Follow-on Production: TBD

• Current Contract Number: N/A

Planned Requirement



Requirement Title: ALRE Services

• Requirement Description: SOW with new scope and range of ALRE support needs are now being planned

• Anticipated Contract Type: CPFF, Full and Open, (but Small Business set asides are also being considered)

• Solicitation(s) planned: 4th Quarter FY20

Planned Requirement



Questions

???


Distribution Statement A -Approved for public release; distribution is unlimited. 25

Support Equipment Department

Successes and Opportunities

30 October 2019

Presented by: Thomas Donnelly




• The Navy currently has over 100,000 items of SE with operational and maintenance activities worldwide.

• Executes the timely acquisition and delivery of Support Equipment (SE) for U.S. Navy (USN), U.S. Marine Corps (USMC), U.S. Air Force (USAF), International Partners and Foreign Military Sales (FMS) cases. Provides skilled personnel resources and processes to execute the life cycle management, engineering and logistics support for the acquisition and sustainment of Common Support Equipment (CSE) and Peculiar Support Equipment (PSE).



Support Equipment DepartmentFacts and Figures

• 5 Det Locations

– Indy (11)

– Norfolk (5)

– New River (2)

– Fort Worth (2)

– St. Louis (6)

• 547 Work Years• 449 Civilians

• Approx 81 WYs CSS

• Customers• 23 PMA’s

• 5 PMS’s

• JSF JPO

• Army & Air Force

• FMS Customers

• CSA Customers



EXECUTIVE DIRECTOR OFFICER IN CHARGE

CHIEF ENGINEER

ALRE Dept




Launch & Recovery/EAF Div



Common/ Commercial Systems Div

PEO(A) PSE Div

PEO(T) PSE Div

PEO(U&W/JSF) PSE Div

Mission Operations &

Integration Dept


Integration Div


Digital Engr Div

Procurement Div

Prototype, Manufacturing &

Test Dept

SE & ALRE Test and Eval Div

Prototype & Manufacturing Div

Technical Ofc Resour/Ops Director

Site Ops Mgr Workforce Ops Mgr

Asst Deputy Comptroller for Lke Ops

Ofc of Gen Counsel/EEO/

Small Bus/CE

NAVAIRHQProcurement

Group


NAWCAD NAWCAD SE & ALRE GROUPLakehurst

OPCON. LKE Comptroller is ADCON to NAWCAD


Distribution Statement A -Approved for public release; distribution is unlimited. 29

NAWCAD SE & ALRE GROUP (Lakehurst)



Comn/CommSys Div –J.

Cmn ATE/TPS Br

Mobile Fac/ Shipbd FF/Acft

Hndl SE Br

Elec/Engine/Prop SE Br

Emerging TPS Br

Hyd/Cryo/Aircrew Sys SE Br -

NDI/Corrosion Control SE Br -

Acft Wiring SE Br

Arm/WpnsHdlng SE/Wpns

Contr SE Br

PEO(A) PSE Div

P-8A/P-3/VH-92 SE Br

CH-53K/H-60 SE Br

H-1/C-130 SE Br

V-22 SE Br

PEO(T) PSE Div

AV-8B/T-45/JPALS SE

Br

F/A-18 A/V A-D SE Br

F/A-18 A/V E-G SE Br

E-2C/D Avncs/NGJ SE

Br

E-2C/D Non-Avionics SE Br

PEO (U&W/JSF) PSE Div -

UAS SE Br

F-35 SE Br

SE Readiness

PEO PSE Lead

AM/MBD

SE Future Capab.



What We Do

• Design, Develop & Procure New GSE – CSE & PSE– “Yellow Gear”

– Non-CASS ATE

– CASS TPS

• Fleet Introduction

• In-Service Support – Develop and Issue Tech Directives

– Investigate NAMDRS

– Real Time Fleet Tech Support



SUPPORT EQUIPMENT (SE) DEFINED

Standalone End Items

Individual Material Readiness List (IMRL) and non-IMRL equipment required

to make an aeronautical system, command and control system, support

system, or end item of equipment (SE for SE) operational in its intended

environment. Includes all equipment to launch, arrest (except ALRE), guide,

control, direct, inspect, test, adjust, calibrate, gauge, measure, assemble,

disassemble, handle, transport, safeguard, store, actuate, service, repair,

overhaul, maintain, or operate the system, subsystem, end item, or

component.

Does not include common hand tools; items used only by the contractor; and

personal equipment, such as head sets and microphones.



CSE vs PSE

PMA-260

Common Support Equipment (CSE) – Comprised of only those general purpose items supplying or measuring broad parameters of physical properties that are known to be established in the using service’s inventory (i.e. ground electrical, pneumatic, and hydraulic power units; towing, hoisting, and fueling devices; signal generation devices; and voltage, amperage, and phase measuring devices). The application of SE items to other end items, systems, or components does not, in itself, justify or classify the items as CSE.

Weapon System PMAs

Peculiar Support Equipment (PSE) – An item of SE that must be designed and developed in conjunction with the development of a specific weapon system and does not meet the criteria of CSE.



SE Commodities and Equipment Types

Handling, Servicing, Inspection

Aircraft Handling Vehicles

Aircraft Crash Salvage

Electrical Servicing

Hydraulic Servicing

Hydraulic Maintenance

Aircraft Maintenance Platforms

Life Support

Cryogenics

Non-Destructive Inspection

Corrosion Control

Armament

Armament Loading

Armament Transport

Propulsion

Engine Test Systems

Engine Maintenance

Pollution Prevention

Painting/Surface Preparation

Washing Operations

Aircraft Maintenance Equipment/

Operations

Facility Recycling

Avionics & Weapons Tester

Commodities

Electronic Warfare

Weapons Control

Communications

Electro-Optics

Software Loading

Navigation

Maintenance Data Processing

Instrumentation

Radar

Automatic Test Equipment (ATE) & Test Program Sets (TPSs)

Hybrid Consolidated Automated Support System (CASS) &

Platform TPSs

EO CASS & Platform TPSs

HP CASS & Platform TPSs

CNI CASS & Platform TPSs

RF CASS & Platform TPSs

RTCASS

eCASS



SE is used at each Maintenance (O, I and D) Level and located at Shore, Ship and Mobile Maintenance Facilities

Aircraft Movement Aircraft Servicing

Post-Mission

Activities

I-Level Maintenance/

Repair

Pre-Flight

Activities

Aircraft Mooring

DepotLevel

Support

• Transfer Mission Data

• HMD Ready Room

Tester

• Inspection

• Chilled Fuel

• RRHB

• Transfer Mission Data

• Transfer Maintenance Data

• Red Gear

• Inspection

• Fluids/Oils/Gasses

• Struts

• Tires

• Wash

• Tow Tractors

• Spotting Dollies

• Tow Bars

• Hand Steering Bar

• Transport/Load Weapons

• Load CM Dispensers

• Check/Verify Stores

Management Systems

• Reconfigure Aircraft

• Airframe

• Surface Restoration

• Utility Systems

• Mission Systems

• Flight Controls

• Propulsion

• Hand Tool Kits

• Non-Destructive

Inspection

• Avionics/VMS

• Electrical

System

• Fuel System

• Propulsion

• Landing Gear

• Structures

• CASS Family of

Testers/eCASS

• Avionics Test

Sets

• Engine Module

Swap and Repair

• Wheel and Tire

Build Up

• Battery Servicing

• Composites

• Secure/Chock

• Safing Pins

• Chains

• Red Gear

Armament & Weapons Handling

Equipment/ Weapons Control SE



Handling SE Commodity

Shipboard Helo Handler (SHH)

Shipboard Tow TractorSD2 Spotting Dolly

Large Land-based Tow Tractor (LLTT)



Servicing SE Commodity

Large Land Based Air Conditioner

Static Frequency Converter on F-35

Corrosion Control Cart on MV-22

Oxygen Cart on C-130

ET-110 Engine Trailer on F/A-18



Inspection SE Commodity

SpectrometerStationary Penetrant Inspection Unit

Boroscopes



Armament SE Commodity

Linkless Ammunition

Loading System

Power Drive Unit

AERO 51E Munitions Trailer with P-8A

Single Hoist Ordnance Loading System

Organic Airborne Mine Counter Measures,

USS Independence (LCS-2)

Loading M61A1 Palletized Gun System

into F/A-18



Crash and Salvage SE Commodity

P25A Environmental Test

P25A during Fire Pit Test

Testing A/S32A-36A Crash Crane on MH-60S

Testing A/S32-35 Crash Crane on F/A-18

P25A during Fire Pit Test



Propulsion SE Commodity



Automatic Test Equipment SE Commodity

Reconfigurable Transportable Consolidated

Automated Support System (RTCASS)

eCASS High Power

eCASS with Panel Interface

Device (PID)

RTCASSCASS w/Operation Test

Program Set



New Opportunities



• Contracting Opportunity: Mobile Electric Power Plant (MEPP)

Requirement Description: Base contract to design, develop, test & deliver 4 pilot production self- contained, diesel engine driven, ground power units to replace legacy equipment to generate electrical power for maintenance on a variety of Fleet aircraft.

Long Range Acquisition Forecast for CSE



• Contracting Opportunity: Dynamometer

Requirement Description: Base contract to design, develop, test & deliver 1 pilot production V-35 Dynamometer to address end of life and obsolescence issues. V35 dynamometer is used to dynamically load turboshaft engines across the full operational envelope.




• Contracting Opportunity: Shipboard Oxygen Cleaning System

Requirement Description: Base contract to design, develop, test & deliver 4 pilot production Shipboard Oxygen Cleaning units to provide shipboard maintenance activities the capability to clean components required to be “oxygen clean”.




• Contracting Opportunity: Databus Tester

Requirement Description: Base contract to design, develop, test & deliver 2 pilot production 1553 DatabusTesters to provide a portable rugged, battery-powered organizational maintenance Level tester for isolating faults on transmission lines and stubs of aircraft data buses.




• Contracting Opportunity: X-Ray Apparatus Replacement

Requirement Description: Base contract to design, develop, test & deliver 6 pilot production used at the Intermediate Maintenance Level by NDI technicians to verify internal structural integrity of aircraft; specifically to inspect for fatigue cracks, porosity, and Foreign Object Debris.




• Contracting Opportunity: Towable Utility Crane

Requirement Description: Base contract to develop, test, and deliver 5 Pilot Production Unit Towable Utility Cranes with follow on production options to replace legacy Utility Cranes.




• Contracting Opportunity: Combo 8A Multiple V-22 SE End Items

Requirement Description: Four SE End Items in support of the V-22 Aircraft

Long Range Acquisition Forecast for PSE

SERD 3210 Fuel Test Set System

SERD 3852 HPDU Spline Tool

SERD 3886 Blade Bolt Persuader SERD 3940 Trunnion Bushing Buffer Bonding Tool



• Contracting Opportunity: Combo 8 Multiple SE end items for the V-22 aircraft

Requirement Description: Three SE end items required for V-22 aircraft wiring repair


SERD 3816 4026AS700-1

SERD 3125 3948AS100-1 Box 2

SERD 3125 3948AS100-1 Box 1



• Contracting Opportunity: Wing Lift for V-22

Requirement Description: Provides support to the nose landing gear and associated aircraft weight after jacks are removed during aircraft wing maintenance tasks performed by depot artisans.




• Contracting Opportunity: F402 Air Turbine Engine Starter Repair

• Requirement Description: Evaluation and repair of Air Turbine Engine Starters used during engine testing/repair on the F402 engine. $250 k est. contract value.




• Contracting Opportunity: Manufacturing BOA for AV-8B SE

Requirement Description: Manufacturing effort to fill current Fleet SE deficit requirements of 163 unique part numbered items. FFP contract value est. $2,200 k.


Engine Build Stands

Test Cell SE

Cobra Crane ECP kits

High Power Chains

Demin Cart ECP kits



• Contracting Opportunity: MQ-4C Compartment Cooling Equipment Set

Requirement Description: IDIQ drawing package manufacturing effort for 2 units with potential for additional units for IOC in 2022.




• Contracting Opportunity: MQ-4C EO/IR ADAPTER ASSY

Requirement Description: IDIQ drawing package manufacturing effort for 1 unit with potential for additional units for IOC in 2022.




• Contracting Opportunity: MQ-4C Radome Holding Fixture

Requirement Description: IDIQ drawing package manufacturing effort for 10 units with potential for additional units for IOC in 2022.




• Contracting Opportunity: MQ-4C Waveguide Nitrogen Service Set

Requirement Description: IDIQ drawing package manufacturing effort for 4 units with potential for additional units for IOC in 2022. Final design still TBD.





Aviation Support Equipment (SE) Program Management Support Services

Contract Information: Small Business, Cost Plus Fixed Fee

Contractor: MTG Services, Inc.

Awarded: July 2018 in the amount of $13.9M including options over 5 years

Description: Provide Program Management and technical work products to assist in meeting program objectives in support of SE programs for Navy, Foreign Military Sales or other DoD aircraft systems. Provide assistance in researching, analyzing, and coordinating program plans and processes such as acquisition planning, Fleet support strategies, SE requirements, and budget development and financial execution.




Aviation Support Equipment (SE) F/A-18 and EA-18G Program Management Support Services

Contract Information: Small Business, Disabled Veteran Owned, 8(a)

Cost Plus Fixed Fee

Contractor: Analygence, Inc.

Awarded: June 2018 in the amount of $3.9M including options over 3.5 years

Description: Provide Support Equipment Program/ Project Management Services in support of F/A-18 and EA-18G Navy and Foreign Military Sales Aircraft programs. Includes assistance in program management, implementation and execution, risk management, acquisition planning services, configuration management, program and project data analysis, budget development and financial tracking and execution.




Aviation Support Equipment (SE) E-2/MV-22 Program Management Support Services

Contract Information: Small Business, Disabled Veteran Owned, 8(a)

Cost Plus Fixed Fee

Contractor: Analygence, Inc.

Awarded: June 2018 in the amount of $3.8M including options over 5 years

Description: Provide Support Equipment Program/ Project Management Services in support of E-2C/E-2D and MV-22 Aircraft programs. Includes assistance in program management, implementation and execution, risk management, acquisition planning services, configuration management, program and project data analysis, budget development and financial tracking and execution.




Aviation Support Equipment (SE) Engineering and Technical Support Services

Contract Information: Small Business, Cost Plus Fixed Fee

Contractor: TPS Associates

Awarded: June 2018 in the amount of $10M including options over 5 years

Description: Provide Design Engineering and Technical Services in support of the acquisition of Support Equipment (SE) systems for assigned aircraft avionics equipment, and other military equipment, as assigned. Perform technical data collection and evaluation in support of test requirements analyses, in conjunction with review of hardware and software specifications, in order to ensure SE capability / suitability for a particular weapon system, avionic subsystem, or other equipment.




SEED Engineering and Technical Support Services

Contract Information: Cost Plus Fixed Fee, Full and Open, Indefinite Delivery/Indefinite Quantity (IDIQ) Contract

Contractors: MTG Services, Inc. (Small Business)

Awarded: March 2016 in the amount of $38.7M including options

Description: The contractor provides engineering and technical services in the following areas: Fighter and Vertical/Short Takeoff and Landing (VSTOL) and Special Missions Aircraft, Avionics Program Support, Aircraft Servicing, Tool Control and Pollution Prevention, Reliability Maintainability and Integrated Diagnostics (R,M & ID), Six Sigma Support, PSE/CSE Hardware and Software Development and ISE Support, Support Equipment (SE) Installations Engineering, Propulsion SE, Aircraft and Armament Handling SE, Aircraft Servicing SE, Module Test and Repair and Miscellaneous Engineering Efforts across multiple NAVAIR sites. The resultant contract has a period of performance of one (1) base year and four (4), twelve (12) month options. The solicitation received 1 offers and the award was made.




Service Life Extension to Aircraft Armament Equipment – DOTC-INIT 311

Contract Information: Cost Plus Fixed Fee, Full and Open Competition via DOTC – DoD Ordnance Technology Consortium

Contractors: SAIC

Awarded: January 2016 in the amount of $2.8M including options

Description: To successfully execute their missions; the armed forces require the service life extension of the fielded bomb racks and launchers that are beyond their original anticipated service life. Instead of discarding legacy launchers, the goal of this program is to reduce the cost and increase safety of AAE through the enhancement of existing equipment. The Precision Guided Training Round (PGTR) is a developmental store that is structurally similar to the Laser Guided Training Round (LGTR) that requires a new method of carriage and release on the F/A-18A-D/E/F. The program support disciplines consist of Program Management, Electrical Design, Software Engineering, prototype development, and test. The resultant order has a period of performance of 46 months with an acquisition strategy for this procurement of a Cost Plus Fixed Fee (CPFF) Level of Effort (LOE) Task Order. The Award of this contract was made to a large business however Small Business is currently performing 61% of the tasking. Small Businesses include: Advent Precision, Inc., Avans Machine, Inc., Celltron, Colbert Manufacturing, Inc., Engineered Test Services, CNC Industries, Coldwell, Delta Electronics Manufacturing, Garrity Tool Company, Graphic Products, Inc., IBC Coating Technologies, Lee Spring Company, Klinge Enameling, Marvin Engineering, Midwest Military Fasteners, PEI Genesis, Powel Electronics, SEA Wire & Cable.




Test Equipment Joint Application and Additional Weapon Support – DOTC-INIT 195

Contract Information: Cost Plus Fixed Fee, Full and Open Competition via DOTC – DoD Ordnance Technology Consortium

Contractors: SAIC

Awarded: January 2017 in the amount of $9.3M including options

Description: The scope of this initiative is to leverage the technology development of USN/USMC test equipment, modernize candidate equipment, and then adapt it to meet requirements for other U.S. Military services. New weapons such as the Small Diameter Bomb (SBD) II are planned to be employed on new and existing platforms such as the Joint Service F-35, the US Air Force (USAF) F-16, A-109, F-15, the US Navy/Marine Corps (USN/USMC) F/A-18, AV-8B, P-8 and existing and future Remotely Piloted Aircraft (RPA). However, current test and test equipment in the Joint Services doesn’t possess the capability to test these interfaces and ensure the platform can safely load and reliably launch these weapons. The program support disciplines consist of Program Management, Electrical Design, Software Engineering, prototype development, and test. The resultant order has a period of performance of 28 months with an acquisition strategy for this procurement of a Cost Plus Fixed Fee (CPFF) Level of Effort (LOE) Task Order. The Award of this contract was made to a large business however it is anticipated that Small Business will perform 30% of the tasking. Small Businesses include: CAMtek, EMA Design Automation, Engineered Test Services (ETS) and Total Phase Inc.




CDI Marine Engineering and Technical Support Services

Contract Information: Cost Plus Fixed Fee, Full and Open Competition via SEAPORT-e

Contractors: CDI Marine

Awarded: March 16, 2018 in the amount of $43.50M including options

Description: The contractor shall provide engineering and technical support services

associated with the acquisition, design, development, fielding and sustainment of aircraft

support systems and equipment such as Automated Test Equipment (ATE), Operational

Test Program Sets (OTPSs), Consolidated Automated Support System (CASS) Ancillary

Equipment, General Purpose Test Equipment (GPETE) and other avionics Support

Equipment (SE).The support services required herein will primarily be in support of Naval

Aviation systems and equipment. However, it is anticipated that tasking on this order may

come from other Department of Defense (DoD) organizational elements, Foreign Military

Sales (FMS) cases, and, non-DoD government activities. The resultant contract has a

period of performance of one (1) base year and four (4), twelve (12) month options. Of

note, there is no requirement or obligation for small business however the prime has a

small business plan with five vendors.



Success and Opportunities

Micro-Purchases for Supplies and Services (Credit Card)

Contract Information: Various (i.e. FEDMALL, Furniture BPA’s)

Contractors: Various

Awarded: Throughout the Fiscal year. Approximately $600K/Year

Description: Procure supplies below the $5K credit card threshold to include; office furniture and office supplies; Commercial-Off-The-Shelf (COTS) parts for design and prototyping; service below the $2.5K credit card threshold such as calibration and repairs.



Mission Operations & Integration Department

Small Business Industry Day

30 October 2019

Presented by: Bill Leach



Business and technical teams collaborating to achieve mission and program outcomes with increased innovation and speed.

Design and execute with the end in mind.

Move resources and decision authority closer to the point of execution.

Encourage people to challenge assumptions, decide and act.

MAO TenetsAccelerating Mission Outcomes

DELEGATE and EMPOWER

INTEGRATE functional disciplines

ADAPT the approach to the outcome

The intent of the Mission Aligned Organization is to enable NAVAIR Commands to

deliver program and mission outcomes with far greater agility and SPEED.

-- VADM Dean Peters, NAVAIR Commander



• Mission Ops & Integration Department

Grouped by specialties

Provide technical support across Departments

• Creation of a Digital Engineering Division Cyber

Data Analytics

S&T

Design / Analysis

• Creation of a Procurement Division Contracts

Acquisition Support

Purchase Card Holders / MIL-Strip Buys

Points of Interest



NAWCAD SE & ALRE GROUP (Lakehurst)Mission Operations & Integration Department

Mission Operations & Integration Dept


Integration Div

ALRE Tech Data Br

SE Tech Data Br

Training Br

METCAL Br

Design Interf/Maint Planning Br


Air/Ship Integr Br

System Safety/R&M Br

Matls Engrg Br

Sys Standardization & PHS&T Br

EMALS/AAG & Info Sys Cost Analysis Br

SE & ALRE Fielded Sys Cost Analysis Br

Digital Engr Div

Cyber Br

Enterprise Tools Br

Labs & Infrastr Br

Data Analytics Br

Strategic Technologies Br

Design/Analysis Br

Procurement Div

PEO Common Sys AcqBr PEO(A) SE Acq Br

Navy SBIR/STTR Acq Br PEO(JSF)/AD SE Acq Br

PEO(T) Acq Br PEO(U&W)/R&D Acq Br

Acq Support Br

SE Matl Mgmt

ALRE Matl Mgmt

NAVAIRHQProcurement Group




Mission Operations and Integration Department

• The Mission Operations & Integration (MO&I) Department is a mission aligned interdisciplinary group that provides a wide spectrum of expertise, services and products that are focused on the mission areas of ALRE, SE and other customers to deliver outcomes. The Department collaborates with and supports the ALRE, SE, PMT, and HQ Departments to achieve mission success. The Mission Operations Department is led by a Department Head and is supported by a staff of Functional Leads. The MO&I Department provides four areas of expertise, products and services: Logistics and Maintenance Integration

Engineering Integration

Digital Engineering

Procurement



Mission Operations and Integration Department

• Acquisition Support Branch … Provides the Acquisition tools to standardize

acquisition processes within the Programs to facilitate acquisition procurement / life cycle acquisition documentation and management support for use by the acquisition workforce at NAWCADLKE….



• OTAs

• ANTX

Additional Points of Interest



Prototype, Manufacturing, and Test

Department Small Business Opportunities

30 October 2019

Presented by: Jeff Lewis



Mission Statement

• The Prototyping, Manufacturing, and Test (PMT) Department is a mission aligned multi-disciplined organization focused on providing rapid prototyping, unique expert manufacturing, industrial engineering services and testing expertise to support the design, development, fielding, maintenance and testing of ALRE and SE systems.



• $500M+ of Prototype & Manufacturing Infrastructure, Facilities, and Assets to meet ALRE and SE Rapid Response Requirements

• 305,000+ FT2 of shop & office floor space under 15 buildings over 10 acres including high bay crane and lift support

• 163 Artisans along with 138 engineers and support personnel (301 Total) collocated with ALRE & SE Design and In-Service Engineers

• 300+ conventional and Computer Numerically Controlled (CNC) lathes, presses, mills, water jets, wire EDM, heat treat furnaces, and producabilitytools.

• Coordinate Measuring Machines (CMM), Long-Range Laser Measuring Tools, Non-Destructive and Destructive Test Equipment

• Dedicated facilities for mechanical and electrical reverse engineering

• NAVAIR’s first Metallic Additive Manufacturing Powder Bed and Powder Blown System

InfrastructurePrototype & Manufacturing



Prototype and Manufacturing Facilities/Capabilities

NAWCAD Lakehurst’s Prototype and Manufacturing Division is an essential

resource for support of Naval aircraft and associated Aircraft Platform Interface

missions.

• Unique and Sole manufacturer and Fleet provider of Cross Deck Pendants (CDPs) for USN, USAF and USMC EAF and Low Loss Launch Valves (LLLV)

• Identified Depot for ALRE Systems and Cryogenic Support Equipment including MK7 Arresting Engines and LLLV

• Recognized Prototype and Rapid Response Facility for Naval Aviation

• Engineering design support / producibility, drawing / model validation, and environmental testing capability

• Full Spectrum QA support, ALRE Flight Safe management and Material Receipt Inspection

• Additive Manufacturing, Digital Thread and Digital Manufacturing Technologies

• DMSMS Support for SE & ALRE mechanical, electronic and avionics components



Test Facilities/Capabilities

DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government Agencies and their contractors Administrative or Operational Use 20FEB2015.

Other requests for this document shall be referred to Commanding Officer, Naval Air Warfare Center, Aircraft Division, Lakehurst, NJ 08733-5000



Contracting Business Profile

FY-19

Infrastructure Material $1.8M

Program Material $4.6M

Infrastructure Services/Labor $6.3M

Program Material/Services Executed $5.2M

Total $17.9

100% 0% 0% $1.8

99% 1% 0% $4.6

53% 0% 47% $3.3

80% 20% 0% $4.2

$1.08 $3.01 $13.9

Total

Total %SB %LB %8(A) SB

Note: Numbers & Percentages Are Approximate Dollars in

Millions and does not include purchases from the Federal Supply

System

Bottom Line:

Approx. 78% of all contracting actions are within our SB contracting portfolio



FY-19 Unison Activity



FY-19 Unison Activity Cont.

Note: Achieved a 6% increase from FY-18 to FY-19



Unison/BPACurrent Commodity Areas:

Industrial Supplies

Metals

Electroplating

Machining Services

Electronics

Welding

Welding Supplies

Testing Services

Machine Repair

Engraving

Powder Coating

Wooden Crates

Manufacturing

Printer Toners

Electronic Computer Manufacturing (New)

Office Furniture (New)

Optical Equipment (New)

Video Equipment (New)

Crane/Forklift Services (New)

10 New Companies in FY-18 & FY-19

Associated with the new commodities

Has Become PMDs Major Source For Support!



Contracting Business Profile Expected

FY-20

Infrastructure Material $2.5M

Program Material $5.2M

Infrastructure Services/Labor $6.9M

Program Material/Services Executed $5.4M

Total $20.0

100% 0% 0% $2.5

99% 1% 0% $5.1

53% 0% 47% $3.7

80% 20% 0% $4.3

$1.08 $3.01 $15.6

Total

Total %SB %LB %8(A) SB

Note: Numbers & Percentages Are Approximate Dollars in

Millions and does not include purchases from the Federal Supply

System

Bottom Line:

Approx. 78% of all contracting actions are within our SB contracting portfolio



• Requirement Title: Large Scale Mill Turn Machine Requirement Description: The Prototype &

Manufacturing Division Cable Shop is in need of a new large scale mill turning machine. The purchase will include freight to our facilities, installation of the machine, and training.

• Requirement Title: CNC Bending Brake Requirement Description: The Prototype &

Manufacturing Division Metal Fabrication Shop is in need of a new CNC bending brake machine. The purchase will include freight to our facilities, installation of the machine, and training.

Anticipated Future Requirements

NAWCAD Lakehurst Industry Day - Harry...

Documents

Transcript of NAWCAD Lakehurst Industry Day - Harry...