NaviTEK® IE

Copper and Fiber Troubleshooterfor Industrial Ethernet Networks (PROFINET)

Product Launch Plan

NaviTEK IE

❖ Industrial Ethernet (PROFINET) Introduction

❖ NaviTEK IE positioning

❖ Target users and sectors

❖ Key features and benefits

❖ FAQ & Product Ordering

❖ Support resources

Content

❖ Existing standard Ethernet devices and protocols have been used as a starting point with

some improvements tailored to industrial automation applications.

❖ The special requirements of the devices and protocols are mainly: Coping with harsh

environments (temperature, vibration, dust ingress, water ingress and harsh chemicals).

❖ Network redundancy, high uptime and low network latency (delay).

❖ Retains the advantages of Ethernet such a compatibility, simplicity, efficiency, cost-

effectiveness, wireless capabilities and migration towards “Industry 4.0”.

❖ Standard Ethernet is not time deterministic = “packets get there when they get there…..”

❖ Industrial Ethernet is time deterministic = packet delivery time is critical for operation

Industrial Ethernet intro –Differences

The difference between standard Ethernet and Industrial Ethernet

Industrial Ethernet intro –Sectors

Industrial Ethernet is widely used in different sectors.

Industrial Ethernet intro - Market

Source: PROFINET organisationSource: Industrial Ethernet Book

27% growth end 2017 Vs end 2016!

❖ A palm-sized field troubleshooting tester for PROFINET cabling and networks

❖ All-in-one tester to meet the most common PROFINET testing requirements

❖ Locates faults fast with a simple user interface for front line technicians

❖ Preventive maintenance test functions reduce down time and allow customers to

carry fewer spare parts

❖ Comprehensive test report for troubleshooting, deployment and acceptance testing

❖ Plus a full suite of standard IT network test functions have been carried over from

the NaviTEK NT Pro

NaviTEK IE - Positioning

NaviTEK IE – Target users

PROFINET specialist (Engineer)

Complicated monitoring

software using a laptop

Electricians (technicians)

Simplified troubleshooting

using a dedicated tester

❖ Automotive industry

❖ Food processing and packaging industry

❖ Utility – water, gas, electricity

❖ Logistics warehouse

❖ Transport – railway, highway, airport etc.

❖ General automated production line

NaviTEK IE – Target Sectors

What does the NaviTEK IE do?

❖ Pinpoint cable faults on copper and fibre cabling

❖ Easily configure nodes to resolve connectivity issues

❖ Prevent network failures with the health check feature

❖ Locate hard to find devices using the device blink feature

❖ Find rogue devices using the NetMAP comparison feature

❖ Create professional PDF reports for your clients

❖ Send reports anywhere using the free IDEAL AnyWARE app

NaviTEK IE – Feature Summary

Features and benefits

❖ Palm size hand-held all in one field tester

- No bulky tablet or laptop in small working areas anymore. The tester can fit in a pocket.

- No need for a separate testers when troubleshooting standard or Industrial Ethernet networks.

❖ Simple device list identifies all controllers/sensors on the network

❖ Intuitive traffic light icons (red, yellow, green) indicate network/device health

❖ Resolve yellow or red alarm faults before they become network failures

❖ Interactive device configuration without PC/laptop

❖ Configure the IP address and the name of devices

❖ Flash the remote device’s LED to confirm if you are talking to the right device

❖ RESET factory default value

❖ Event log quickly identifies status change of network devices

- Monitor networks for up to 48 hours/2 days

- Capture date and time of status changes/alarms/errors

NaviTEK IE - Key features I

Features and benefits

❖ Dedicated cable test for PROFINET with M12 adapter

- Dedicated colour scheme for PROFINET cable test

- Includes RJ45-M12 adapter cables

❖ A cost effective solution all-in-one tester

- Covers the majority of daily maintenance jobs and troubleshooting tasks

- Affordable test solution for every production line or factory

- Reduce the cost of monitoring systems / analysis software

❖ NetMap comparison feature makes it easy to identify changes on the network

- Detect any key parameter changes on each device in the network

- Eliminate guess work and determine the exact fault by comparing previous parameters

- Example: Identify devices that periodically reboot by monitoring reported up time, and replace before it fails

completely

❖ Easy reporting

• Automatically records all monitored parameters for inclusion in a comprehensive test report

• Test report features pass/fail indications

• Tester generates PDF and CSV reports with quick transfer of test results via Wi-Fi and USB – no PC required.

NaviTEK IE - Key features II

NaviTEK IE – Check the network and device

Where can I use the NaviTEK IE to check the network and device status?

Core and access network

MotorValve

Counter

Sensor

Sensors

Trunk Fiber/Copper Ring

Industrial Ethernet Switch (IES)

Industrial Ethernet Gateway

PLC

machine

HMI (Human Machine Interface)

IT network

IESIES

Industrial Ethernet Switch (IES)

NaviTEK IE test point

PROFINET

Fiber

NaviTEK IE – Scanned node list

How do I know which nodes are present in the network and their health status?

The scanned node list using the traffic light system gives you a straight answer!

Device list with individual health indication

Overall test status

What do red, yellow and green traffic lights status mean on each device?

Critical events detected and device may not be operational• No or duplicate name set • No or wrong IP address set • No or wrong device subnet mask set • Device communication failure • Device outside of tester subnet mask • Packet errors occurring • Link load > 50%

No critical events detected and device is still operational• Packet errors occur but at an acceptable limit • Link load < 50% • Another identical device model

found but has different firmware / hardware version • Device speed is 10Mb/s • Device port half duplex

No abnormal events detected• No errors • No alarms • No duplicated IP address or name

NaviTEK IE – Device health status criteria

NaviTEK IE – Detailed device info

How can I determine if a specific device is causing errors/alarms ?

Device port statistics will allow you to drill down in detail to get the answer.

Device PLC Info Device port statistics info Device Rx (input) statistics Device Tx (output) statistics

NaviTEK IE – Device Interaction

How can I easily configure the replacement for a faulty device ?

NaviTEK IE allows device configuration without PC software eliminating the need for network

specialists.

1. Confirm target device by flashing its

status LED

2. Set device name 3. Set device IP 4. Reset to factory default if necessary

NaviTEK IE – NetMAP Comparison I

How do I know if devices in the network have been changed or modified ?

You can use “NetMAP” function to compare previous and current network status.

NetMAP Comparison -Compared resultsNetMAP Comparison – maps to compare NetMAP Comparison - select map from list

NaviTEK IE – NetMAP Comparison II

How do I identify new, missing or mismatching devices and see details?

From NetMAP compared results you can drill down to see the details of individual device errors.

NetMAP Comparison - New and mismatching devices

NetMAP Comparison -Compared results

NetMAP Comparison -mismatching devices’ detail

NaviTEK IE – NetMAP Comparison III

How can I transfer the current network map device list for future reference?

You can use NetMAP file transfer to store the current network maps into USB stick for future

reference.

NetMAP list can be transferred to USB stick

NaviTEK IE – M12 D or X coded adapter cable

How can I verify that the PROFINET (M12) cable is working successfully?

PROFINET (M12) cable adapters included with the correct colour schemes shown.

PROFINET cable under testR

J45

M1

2

M12 D or X coded Adapter Cable

RJ4

5

M1

2 #1

Active Remote

M12 D or X coded Adapter Cable

NaviTEK IE – M12 D or X coded adapter cable

How can I check the PROFINET M12 connector devices work successfully?

PROFINET M12 adapter cables are included to allow easy access to the device.

PROFINET Network under test with M12 adapter cable

RJ4

5

M1

2

M12 D coded Adapter Cable

M1

2

M12 Switch

NaviTEK IE – Optical link test

How do I measure the optical link power level?

Colour coded pass/fail indication of the fibre link Rx power level eliminates the need to search

device specifications. A red bar indicates low power level.

PROFINET Network with optical link

LC LC

Industrial Ethernet Switch

Optical Rx power can be measured on 100Mb/s link as well although it does not support 100Mb/s link test.

NaviTEK IE – 100M Optical link test

How can I access the 100Mb/s optical link of a PROFINET device?

You can use a 100Mb/s SFP media converter to access 100Mb/s optical link.

PROFINET Network with 100Mb/s optical link

Industrial Ethernet Switch

LC LC

NaviTEK IE – Event log

How can I isolate the cause of the intermittent fault quickly in a PROFINET production line?

Event log will assist you to identify what and when the error appeared on a specific device.

Event log main page Event log running page Detailed event page

NaviTEK IE – Results transfer

How can I transfer the test report to the mobile device?

You can use IDEAL AnyWare with the Wi-Fi dongle to transfer the test report.

Stored NetMAP list transferred via Wi-Fi to Mobile’s IDEAL AnyWare

NaviTEK IE –Test report - 1

How can I prove the network I commissioned is working correctly?

The comprehensive test report is the answer!

Test report of summary page

Test report of individual test page top

NaviTEK IE –Test report - 2

How can I prove the network I commissioned is working correctly?

The comprehensive test report is the answer

Test report of detailed test items samples

Q: What’s the difference between NaviTEK NT Pro and NaviTEK IE?A: NaviTEK IE has all the NaviTEK NT Pro functions plus Industrial Ethernet (PROFINET) test functions with M12 D coded adapter cables.

Q: Does the NaviTEK IE support EtherNet/IP, EtherCAT and Modbus TCP protocol?A: No, the NaviTEK IE only supports PROFINET at the moment.

Q: Can I upgrade NaviTEK NT Plus/Pro to NaviTEK IE?A: No, it is not upgradable.

Q: Why does the device scan take so long?A: Each device can take several seconds to respond to the NaviTEK IE request via the SNMP protocol. Hundredsof devices in the network can lead to a long test time.

Q: Does the NaviTEK IE perform a Cat 5e/6A wiremap?A: Yes.

Q: Can the NaviTEK IE test a 100M optical link?A: Yes when you use a 100Mb/s SFP media converter accessory (R151060)

NaviTEK IE - FAQ

Part Number Product name and description UK £ (list) EMEA € (list)Rest of world US$ (list)

R151010

NaviTEK IE – Industrial Ethernet Tester.1 x NaviTEK IE test unit, 1 x Remote unit No. 1, 1 x Rechargeable Power Module, 1 x PSU EU/UK/US/AS adapters, 2 x Patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x Quick reference guide, 1 x Carry case, 2 x PROFINET RJ45 (m) - M12 (f) D coded 1m adapter cable (R151058)

£1495 €1795 $2095

R151058 2 x PROFINET RJ45 (m) - M12 (f) D coded 1m adapter cable £55 €65 $75

R151059 2 x PROFINET RJ45 (m) - M12 (f) X coded 1m adapter cable £90 €100 $120

R151060 1 x 100Base-Fx SFP housing Media Converter £105 €120 $140

MGKSX11 x 1000BASE-SX fiber kit. Includes 850nm SFP (Small Form factor Pluggable) SX transceiver, cable & connector set (LC/LC and LC/SC duplex multimode cables and SC/SC duplex adaptor)

£129 €153 $199

MGKLX21 x 1000BASE-LX fiber kit. Includes 1310nm SFP (Small Form factor Pluggable) LX transceiver, cable and connector set as MGKSX1

£159 €188 $246

150050 Active remotes Set No. 2 - 12 £247 €294 $386

62-164 1 x IDEAL Amplifier probe £51 €62 $82

Product ordering –Part Number & Price

Note: All price subject to change.

New

New

New

New

Product Name NaviTEK IE

Unit Dimensions HxWxD (mm) 175 x 80 x 40

Unit weight with battery (g) 400

Shipping weight (Kg) 1.5

Shipping dimensions (mm) 312 x 286 x 108

Weight and dimensions are provided for guidance only.

All unit measurements are external only.

Product ordering –Weight, Dimensions and Package

The NaviTEK IE will be delivered in new packaging with multi-lingual information (English, French, German, Spanish, Italian, Portuguese and Chinese).

Kit Contents:

• 1 x NaviTEK IE unit

• 1 x Active remote No.1

• 2 x PROFINET RJ45 (m) - M12 (f) D coded 1m adapter cable

• 1 x NiMH battery packs

• 1 x Power supply (UK/EU/US/AU adapters)

• 1 x Quick reference guide (English)

• 1 x USB Wi-Fi adapter

• 2 x 30 cm Cat 5e STP patch cords

• 1 x Carry case Warranty:A standard twelve month warranty for the main unit.Accessories and batteries come with a six month warranty.

Product ordering –Kit Contents and Warranty

All supporting documentation can be found on the SID database under “NaviTEK IE” category. Printed versions ofthe brochure will be available in small quantities locally.

• Product Brochure - English, French, German, Spanish, Italian, Portuguese, Chinese

• Product Photos

• Application Photos

• Quick Reference Guide and User Manual

• Technical specification (contained in User Guide)

• Product Launch Pack

• Press Release

• AnimationAlternatively visit www.idealnetworks.net

Support Resources –Marketing Material

EC Declaration of conformity:

•2006/95/EC

•2004/108/EU

•2011/65/EU

•EN55022:2006/ A1:2007

•EN55024:1998 / A1:2001 / A2:2003

•IEC 60950-1:2005+A1:2009 / EN60950-1:2006+A1:2010

*Certificate can be downloaded from SID

Support Resources –EC Declarations

• First hand-held Industrial Ethernet (PROFINET) tester in the market

• Pinpoint cable faults on copper and fibre cabling

• Interfaces with RJ45, M12 and fibre connections

• Prevent network failures with the health check feature

• Locate hard to find devices using the device blink feature

• Correct network issues using the discovery and configuration tools

• Discover rogue devices that cause a network conflict using the 24 hour event log

• Display and validate network node detail

• Create a professional PDF reports for your clients

• Send reports anywhere using the free IDEAL AnyWARE app

• Replaceable RJ45 contacts to reduce cost of ownership

All-in-one hand-held PROFINET network field

troubleshooting and maintenance

tester

Auto scan and detection of

network devices’ health status with easy traffic light

system

Send pdf/csv test reports to mobile device wirelessly with free IDEAL AnyWARE App

Device setup, NetMAP

comparison and event log make troubleshooting faster and easier

Support Resources –Top Bullet Points & Callout Points

For further information please contact your local sales representative.

NaviTEK IE Product Launch Pack Information provided by

Product Manager: Xing Yexing.ye@idealnwd.com+44 7471033563

Contact Information