NAL Feeder Pillar for RS115TEE...The feeder pillar with spigot from NAL has been designed to be...
2
AREAS OF USE TRAFFIC SIGNALS STREET LIGHTING MOTORWAY COMM’S CCTV POWER TELECOMMUNICATIONS YOUR SPECIFIC USE TM RETENTION SOCKETS - STAKKAbox ACCESS CHAMBERS - NAL CONTROLLER BASE innovative cabling system The feeder pillar with spigot from NAL has been designed to be installed in the RS115 Tee Bend Retention Socket. This new system allows all civils work to be completed before any electrical works are carried out. Once installed all the cables can be pulled up through the Tee Bend in the Retention Socket and up the spigot of the feeder pillar. The orientation of the pillar can easily be altered to suit location. By using the Retention Socket this ensures there are no delays waiting for the electrical connections to be carried out. Also in the event of a knockdown the feeder pillar can be removed and replaced within minutes, without any costly civils work. Spigot allows 360 degree rotation Allows all civils works to be carried out prior to electrical installations Creating a fully ducted system Future proofing www.nal.ltd.uk With Retention Socket Base FEEDER PILLAR for Highways INNOVATIVE SOLUTIONS
Transcript of NAL Feeder Pillar for RS115TEE...The feeder pillar with spigot from NAL has been designed to be...
AREAS OF USE
TRAFFIC SIGNALS
STREET LIGHTING
MOTORWAY COMM’S
CCTV
POWER
TELECOMMUNICATIONS
YOUR SPECIFIC USE
TM RETENTION SOCKETS - STAKKAbox ACCESS CHAMBERS - NAL CONTROLLER BASE
inn
ova
tive
cab
ling
sys
tem
The feeder pillar with spigot from NAL has been designed to be installed in the RS115 Tee Bend Retention Socket.
This new system allows all civils work to be completed before any electrical works are carried out. Once installed all the cables can be pulled up through the Tee Bend in the Retention Socket and up the spigot of the feeder pillar. The orientation of the pillar can easily be altered to suit location.
By using the Retention Socket this ensures there are no delays waiting for the electrical connections to be carried out. Also in the event of a knockdown the feeder pillar can be removed and replaced within minutes, without any costly civils work.
Spigot allows 360 degree rotation
Allows all civils works to be carried outprior to electrical installations
Creating a fully ducted system
Future proofing
PATENT GB2435557B
www.nal.ltd.uk
With Retention Socket BaseFEEDER PILLAR
for HighwaysINNOVATIVE SOLUTIONS
Retention Socket Specification
Head, Locking lid and plug: Cast Steel to EN10340 GS240
Tee Bend Base:
Setscrew: M16 A2 Stainless Steel, Setscrew DIN 933
Assembly Screws: A2 Stainless Steel Setscrew DIN 933
Connecting tube: Galvanised Steel
Finish: Galvanised
Ductile Iron to BS2789 500-7
170mm
INNOVATIVEHIGHWAYPRODUCTS
Tel: +44 (0)1905 427100Website: www.nal.ltd.uk
155mm
670m
m
155mm
300m
m
NAL R150 Technical Specification
All Pillars to bemanufactured from 2mm stainless steel, either in natural or with a powder coated finish.
All pillars to be supplied with an external grade plywood backboard for the fitting of electrical equipment.
All pillars to be fitted with either 1 or 2 Tri-key cam-lock.
All pillars to be manufactured with a 300mm long, 114.3mm diameter spigot to suit the NAL RS115 Tee Bend Retention Socket.
Side
Front Side
114.3mm
1
75
271
Weir Lane, Worcester WR2 4AY Tel: 01905 427100 Fax: 01905 427030 Email: [email protected]
INNOVATIVEHIGHWAYPRODUCTS
Tel: +44 (0)1905 427100Website: www.nal.ltd.uk
400mm
830m
m300m
m
NAL RH400
114.3mm
Front
450mm
PATENT GB2435557B
www.nal.ltd.uk
With Retention Socket BaseFEEDER PILLAR
for HighwaysINNOVATIVE SOLUTIONS
![British Standard Fuse Links - Accueil Standard Fuse Links Module 3. Module 3 ... (Feeder Pillar fuses) Module 3 ... ProFuse Fuse School Module 3.ppt [Compatibility Mode]](https://static.fdocuments.us/doc/165x107/5ac933cd7f8b9acb688d340e/british-standard-fuse-links-accueil-standard-fuse-links-module-3-module-3-.jpg)
