MYD-SAMA5D3X-C Development Board MCC-SAMA5D3X-C CPU Module as Controller Board 536MHz Atmel SAMA5D3 Series ARM Cortex-A5 Processors 256MB DDR2 SDRAM (512MB is optional) 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM Serial ports, USB, Ethernet, CAN, RS485, TF, Audio, LCD One Gigabit Ethernet for SAMA5D33/34/35/36 Two CAN for SAMA5D34/35/36 Ready-to-Run Linux 3.6.9 and Android 4.0.4

Figure 1-1 MYD-SAMA5D3X-C Development Board

Description The MYD-SAMA5D3X-C Development Board is a low-cost evaluation platform for Atmel’s SAMA5D3 ARM Cortex-A5 processor-based MPU which can operate at up to 536MHz (850DMIPS) at under 150mW and is ideal for various industrial application such as control panels, smart grid devices and bar code scanners - anything that needs high levels of connectivity, enhanced user interfaces, robust security, or battery operation.

The MYD-SAMA5D3X-C Development board is using a base board for MYIR’s MCC-SAMA5D3X-C CPU Module which is a System on Module (SoM) for the heart of the system. The CPU module MCC-SAMA5D3X-C has 256MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Gigabit Ethernet PHY on board. It is connected with the base board through two 2.0mm pitch 80-pin male pin headers. The base board has all extended interfaces for software development including up to six serial ports, one 10/100/1000Mbps Ethernet, two CAN, two USB Host and one USB OTG, TF card, JTAG and more others. MYIR also offers 4.3- and 7-inch LCD Modules for this board as options. The Linux, Android SDK and detailed user manual for this board are offered to 1 / 8

enable your rapid evaluation and development based on Atmel’s SAMA5D3 series processors. User can also use the MYD-SAMA5D3X-C board directly as control or display unit for your embedded products. The MYD-SAMA5D3X-C Development Kit includes following items:

MYD-SAMA5D3X-C board Ethernet cable Serial cable USB cable

Product DVD 5V Power Adapter Optional 4.3- or 7-inch LCD/TSP

Figure 1-2 MYD-SAMA5D3X-C Development Kit

The MYD-SAMA5D3X-C has following models:

MYD-SAMA5D31-C Development Board – with MCC-SAMA5D31-C CPU Module for Atmel SAMA5D31 MYD-SAMA5D33-C Development Board – with MCC-SAMA5D33-C CPU Module for Atmel SAMA5D33 MYD-SAMA5D34-C Development Board – with MCC-SAMA5D34-C CPU Module for Atmel SAMA5D34 MYD-SAMA5D35-C Development Board – with MCC-SAMA5D35-C CPU Module for Atmel SAMA5D35 MYD-SAMA5D36-C Development Board – with MCC-SAMA5D36-C CPU Module for Atmel SAMA5D36

The main differences can be seen from below table. MYIR deliveries the MYD-SAMA5D36-C model by default. Item MYD-SAMA5D31-C MYD-SAMA5D33-C MYD-SAMA5D34-C MYD-SAMA5D35-C MYD-SAMA5D36-C

Processor ATSAMA5D31 ATSAMA5D33 ATSAMA5D34 ATSAMA5D35 ATSAMA5D36

10/100/1000 Ethernet 0 1 1 1 1

UART 6 4 4 6 6

LCD 1 1 1 0 1

CAN 0 0 2 2 2

Table 1-1 Comparison for Model Selection Hardware Specification The Atmel® SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor, operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit ADC, 32-bit timers and more.

2 / 8

http://www.atmel.com/products/microcontrollers/arm/sama5d3.aspx

Figure 1-3 SAMA5D3 Series Key Features

The MYD-SAMA5D3X-C series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.

Figure 1-4 Base Board of MYD-SAMA5D3X-C

Figure 1-5 MCC-SAMA5D3X-C CPU Module

Controller Board of MYD-SAMA5D3X-C

This board is characterized as in below table 1-2:

Processor

• Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 - ARM Cortex-A5 processor, operates at up to 536MHz (850DMIPS) - 16KB data Cache,16KB instruction Cache - 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA) - Fully Integrated MMU and Floating Point Unit (VFPv4) - 128KB of SRAM and 160KB of ROM

Memory and Storage

• 256MB DDR2 SDRAM (512MB is optional) • 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM • One TF Card slot

3 / 8

Peripheral Interfaces

• Serial ports - 1 x 3-line RS232 Debug serial port (DB-9) - 4 x 5-line RS232 serial port - 1 x RS485 serial port

• 2 x High speed USB HOST • 1x Mini USB OTG (be configured as USB device by default) • 1 x 10/100/1000Mbps Ethernet for SAMA5D33/34/35/36 • 2 x CAN interfaces (only for SAMA5D34/35/36) • Audio input port • Audio output port • 1 x LCD interface (Supports 24-bit true color TFT LCD, resolution up to 2048 x 2048 pixels, SAMA5D35

cannot support) • 1 x 4-wire touch screen interface • 1 x 20-pin standard JTAG interface • 1 x Reset button and 2 x User buttons • 2 x Power indicators (Red, one on base board and one on CPU module) • 1 x User LED (Blue, on CPU module) • 2 x User LEDs (One is Blue and one is Red) • 3 x expansion interfaces (J4, J5 and J6) bring out:

- 2 x SPI, 1 x I2C, 2 x SDIO, 6 x ADC, 4x UART, 16-bit Data Bus, 8-bit Address Bus

Mechanical Parameters

• Dimensions: - Base board: 140mm x 100mm - CPU Module (MCC-SAMA5D3X-C): 55mm x 82mm

• PCB layers: - Base board: 4-layer design - CPU Module: 8-layer design

• Power supply: 5V/2A (base board), 3.3V/0.5A (CPU Module) • Power consumption: 5V/0.05A (base board), 5V/0.32A (base board + CPU Module),

5V/0.37A (base board + CPU Module +4.3” LCD) • Working Temp.: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

4 / 8

Function Block Diagram

Figure 1-6 Function Block Diagram of MYD-SAMA5D3X-C

Dimension Chart of MYD-SAMA5D3X-C

Figure 1-7 Dimension Chart of MYD-SAMA5D3X-C

5 / 8

MYD-SAMA5D3X Development Board Layout

Figure 1-8 MYD-SAMA5D3X-C Development Board Peripherals

Figure 1-9 MYC-SAMA5D3X CPU Module

6 / 8

Software Features The MYD-SAMA5D3X-C is a Linux and Android ready-to-run development board. MYIR offers software packages along with the board. Many peripheral drivers are provided in source code to help customers quickly start their own development and create their own applications. The software features are summarized as below:

OS Item Features Description

Linux

Boot

Boot Strap First boot program (source code available)

u-boot Secondary boot program (source code available)

Boot Mode Boot Linux from NAND Flash

Image

update Support programming kernel image into Nand Flash through USB

File system update

Support programming file system into Nand Flash through USB

Kernel Version Linux 3.6.9 (source code available)

File system Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS

File system Format UBIFS file system

Drivers LED, NandFlash, DataFlash, SD, SPI, CAN, LCD+Touch, Audio, Ethernet, USB, GPIO, Button, RS485, RTC, USART (source code available)

Demo program Audio, CAN, RS232, RS485, RTC, GPIO, network, mtd, key_led

Graphical Library

QT/Embeded

4.5.3 Already ported (source code available)

Android Kernel Version Android 4.0.4

Drivers SD, LCD+touch (LCD and touch screen driver), Audio, Ethernet, USB, Button

7 / 8

Order Information

Product Item Part No. Packing List

MYD-SAMA5D3X-C Development Board

(256MB DDR2, 256MB Nand Flash, industrial) MYD-SAMA5D3X-C-I

One MYD-SAMA5D3X-C Development Board

One DB9-to-DB9 Serial cable

One Net cable

One USB cable

One 5V/2A Power adapter

One Product DVD

(including user manual, datasheet, base board schematic

in PDF format and software packages)

Add-on Options

MY-LCD43TP 4.3-inch LCD Module

MY-LCD70TP 7-inch LCD Module

MCC-SAMA5D3X-C CPU Module

Remark:

1. One MYD-SAMA5D3X-C Development Board includes one CPU module MCC-SAMA5D3X-C mounted on the base board. If you need

more CPU module, you can order extra ones. MYIR deliveries the board with SAMA5D36 CPU by default.

2. Our products are delivered of industrial grade (-40~85 Celsius) by default.

3. We accept custom design based on the MYD-SAMA5D3X-C, whether reducing, adding or modifying the existing hardware according

to customer’s requirement.

MYIR Tech Limited Room 1306, Wensheng Center, Wenjin Plaza, North Wenjin Road, Luohu District, Shenzhen, China 518020 E-mail: sales@myirtech.com Phone: +86-755-22984836 Fax: +86-755-25532724 Website: http://www.myirtech.com

8 / 8

http://www.myirtech.com/

MYD-SAMA5D3X-C Development Board