K Exceptionally high chemical resistance

K Resistance to mechanical stresses

K For expansion joints in floors and walls

Mycoflex Resyst The joint sealing system for the highest requirements

The joint sealing system for the highest requirements

Mycoflex Resystak

ut 1

4076

4 EN

Contact details Protection Technologies

MC-Bauchemie Müller GmbH & Co. KGProtection TechnologiesAm Kruppwald 1-846238 BottropGermany

Phone: +49 2041 101-10Fax: +49 2041 101-188

protection-technologies@mc-bauchemie.com www.mc-bauchemie.com

The joint sealing power-packer

Conventional sealing systems for expansion joints based

on polyurethanes, silicones, MS polymers or polysul-

phides can often give rise to weak points in the structure.

Chemically, they frequently exhibit less resistance than

the adjoining coating.

Maximum resistance for a safe and secure solution

Now, with Mycoflex Resyst prefabricated polymer foam mouldings, you have all you need for the sealing of expan-sion joints offering exceptional mechanical and chemical resistance.

Durable seal

Even under conditions of widely varying temperature-relat-ed component expansion values, the material properties of these mouldings ensure a reliable, permanent seal. Offer-ing high chemical resistance, Mycoflex Resyst thus offers

a thoroughly durable solution in all fields of application in-volving exposure to aggressive media.

Easy to install

The Mycoflex Resyst moulding is coated with Mycoflex Resyst Adhesive over its contact flank surfaces and then simply pressed manually with a degree of prestressing into the expansion joint.

Moulding profiles and thicknesses to suit every job

The Mycoflex Resyst joint sealing can be used for all com-monly encountered expansion joint dimensions. The avail-ability of prefabricated, precut mouldings for various sizes of corner, angle and T-piece connection ensures easy and reliable installation. The entire system required for each ap-plication is supplied ready adapted to the requirements of each job situation.

Mycoflex Resyst

Attaching the straight mouldings to the corner piece Secure in-line connection of the mouldings with a 60° mitre cut

Performance features

K Exceptionally high chemical resistance

K Resistance to mechanical stresses

K Secure bonding to different materials such as concrete, steel, resin coatings and polymer concrete

K High rigidity for simple vertical installation

T-piece

Floor-wall corner

Corner piece

Straight moulding

Intersection

Standard profile mouldingsInstallation