My project intrumentation - CO2 Detector wth Arduino Uno
-
Upload
jonathan-messakh -
Category
Engineering
-
view
36 -
download
2
Transcript of My project intrumentation - CO2 Detector wth Arduino Uno
CO2 Detectorwith Arduino Uno
By Present : -Ahmad Zaenudin(151611002)-Jonathan Messakh(151611014)-Nur Fita Widiastuti(151611018)
Class : 2A (D3 TPTU)
Backround :
CO2 is a gas that is colorless, tasteless and does not stimulate, the source of CO2 gas comes primarily from the burning of petroleum, coal and natural gas.
As long as humans are still using wood fuel, increase the levels of carbon dioxide gas in the air can be ignored.
With the population growth rate increases the range of human needs, such as food, housing, lighting, and transportation. That means the procurement of fertilizer, agro industry, electric power, and transportation industries is increasing, so that the fuel requirements are also increasing. As a result, the production of more and more carbon dioxide into the air in industrial areas.
Description Project
Project we make is a detector co2 (carbon dioxide) to give the air intake to the plant so that the plant remains fresh so stay awake and
grow well, and we make this tool using arduino uno as tools so that we can make this project.
Arduino is a computer hardware and software company, project, and user community that designs and manufactures microcontroller kits for building digital devices and interactive
MQ-135 gas sensor is a hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas-sensitive element test concentration.
Tools used
LCD (liquid crystal display) is the technology used for displays in notebook and other smaller computers. Like light-emitting diode (LED) and gas-plasma technologies, LCDs allow displays to be much thinner than cathode ray tube (CRT) technology.
Buzzer Electric is an electronic component that can convert electrical signals into sound vibration.
A Relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate the switch and provide electrical isolation between two circuits. In this project there is no real need to isolate one circuit from the other, but we will use an Arduino UNO to control the relay.
Transformer or often abbreviated with the term transformer is an electrical device that can change the level of an AC voltage level to another. The purpose of changing the level of such as lowering the AC voltage of 12 VAC or 220VAC to raise the voltage of 110VAC to 220 VAC.).
Light Emitting Diode or LED is often abbreviated with electronic components that can emit monochromatic light when a given voltage is developed. LED is a family of diodes made of semiconductor materials.
Connector Male vs. Female: Male connector is the side of a connection that has prongs - like the power plug on your computer monitor. The side that runs from your monitor to the wall is a male. Outlet is the female connector.
Wiring Project
Datasheet project : Datasheet Gas Sensor MQ135 - Datasheet LCD
Datasheet LED - Datasheet Arduino
Datasheet LED - Datasheet Buzzer
Conclution :
Of the project that we create can be conclude that the CO2 greenhouse is very important. Because CO2 is food for plant, and which carry the essentially all plant on earth or the sea. And the more CO2 they eat (air or water absorbsing) the bigger and better for them .