MUDGUARDS PLASTIC ROUND 02.01.01 2011.pdf · 2013-11-13 · Zetor number 0216 230.000 230 540 900...
Transcript of MUDGUARDS PLASTIC ROUND 02.01.01 2011.pdf · 2013-11-13 · Zetor number 0216 230.000 230 540 900...
Material: polyethylene, Colour: black
Material: istoflex for mudguards: 0211 240.200, 0211 270.100, 0211 270.200, Properties: light, high strength and flexible, resistant to climate influences.
The size of the mudguards is produced according to the width of the tire (+ min. 60 mm) and radius of the tire ( + 80 mm and more ) Dimensions of mudguards stated in the table are only for orientation
TT-number B
width mm
S span mm
R radius
mm
L length
mm
H height
mm
Q weight kg / pcs
Dimensions of tires
(dimensions stated here are only for orientation)
0211 220.100 220 800 400 1285 415 1,1 LUBLIN; 165/75R16C; 155R15; 17-380
0211 240.200 240 960 480 1570 500 1,75 7.00-7.5R15; 6.00-7.00R16; 205-215R16; 7R17.5; 7R19.5 – mat. ISTOFLEX
0211 270.100 270 1000 500 1670 550 1,9 7.5R15; 9.00R15; 7.5R16; 8-8.5R17.5; 205/75-215/75R17.5 – mat. ISTOFLEX
0211 270.200 270 1120 560 1870 615 2,4 8.25-9.00R16; 9.5-10R17.5; 8-9.5R19.5; 7.00-
8.25R20 – mat. ISTOFLEX 0211 280.000 280 900 450 1380 1,3 7.50R15; 9,00R15; 205/75 - 215/75 R17,5 0211 300.100 300 1000 550 1730 550 2,5 10R17.5; 10.00R15;235R16C; 24516C 0211 350.000 370 1300 650 2260 750 4,2 255/70R22.5; 275/80R22.5; 0211 380.000 380 780 390 1220 185-205/70R15; 185-205/75R14;185-195/75R16 0211 400.200 400 880 440 1380 440 2,0 185-205/70R15; 185-215/75R14 0211 400.300 400 1000 500 1470 452 2,3 165R14(Z);165R14C(Z);6.70R13(Z) 0211 450.100 450 880 440 1380 3,2 7.00R15; 6.00-6.5R15; 7R17.5; 7R19.5 0211 450.200 435 1320 660 2100 4,5 385 / 65R22.5; 425/65R22,5; 16,5R22,5 0211 450.350 450 1270 650 1960 610 4,96 14.5R20;13/75R22.5;385/65R22.5;15R22.5 0211 480.200 480 1120 560 1870 615 3,80 7.00R20(Z) 0211 510.000 510 1010 505 1670 4,0 AVIA A 60/75; 205/65R17,5; 205-215/75R17,5 0211 530.100 530 1120 560 1680 615 3,6 7.00R20; 9R17.5; 8-9R19.5; 8R22.5
0211 550.000 550 1000 500 1600 550 4,3 205/215R14C; 205-215R16C; 9R17.5;205/75-
225/75R17.5;
0211 550.100 550 1100 550 1750 550 225-235/75R17,5;9,5R17,5 0211 550.200 550 1150 1720 225-235/75R17,5; 9,5R17,5 0211 600.100 600 1150 575 1730 255/70R22,5; 245-265/70R19,5; 245/70R17,5 0211 620.000 620 1120 560 1870 615 5,1 10R17.5;10/70R22.5; 235/75R17.5; 245/70R19.5 0211 650.100 650 1120 550 1870 615 5,5 10.00R15; 265/70R19.5; 275/70R22.5 0211 650.200 650 1260 630 1900 590 5,5 10.00R20; 295/70R22.5; 12/80R22.5 0211 650.250 650 1250 1900 10.00R20; 295/70R22.5; 12/80R22.5 0211 660.000 650 1340 670 2100 6,0 275/70R22,5; 295/75R22,5; 275-285/80R22,5 0211 670.100 670 1300 650 2260 750 7,1 11.00R20(Z); 12.00R20(Z); 10.00R22(Z)
0211 700.100 700 1270 650 1960 610 6,2 12R22.5;315/80R22.5;13R22.5;13/75R22.5
MUDGUARDS PLASTIC ROUND 02.01.01.0
update 01/2008
Design standart
Material: polyethylene,
Colour: black Properties: light, high strength and flexible, resistant to climate influences.
The size of the mudguards is produced according to the width of the tire (+ min. 60 mm) Dimensions of mudguards stated in the table are only for orientation
TT-number
B width mm
R radius
mm
S span mm
H height
mm
M length
mm
Q weight kg /pcs
Dimensions of tires
(dimensions stated here are only for orientation)
0212 230.000 230 900 430 390 1,5
0212 300.100 300 895 470 400 2,5
0212 450.250 450 930 500 3,14
0212 450.300 450 910 400
0212 495.000 495 1000 550 500 3,57
0212 510.100 510 1005 560 515 4,0 7,00/8,25R15; 7,00-7,50R16; 205-215/75R16; 8-
8,5R17.5; 217/75R17.5, AVIA
0212 550.100 550 1080 560 4,9
0212 650.000 650 750 1330 715 750 6,9 9,00-11,00R20; 11,00-12,00R22,5; 12/80R22,5;
315/75R22,5; LIAZ
TT-number B
width mm
L length
mm
S span mm
H height
mm
Q weight kg / pcs
Dimensions of tires (dimensions stated here are only for orientation)
0211 220.300 220 1120 750 330 1,0 155/70 R12L-165/70 R14 5.60-6.15/155-13
0211 240.300 240 1235 800 380 1,1 7.00 R13; 175-185 R13; 175-185 R14; 175/70 R14
MUDGUARDS PLASTIC WITH FLAT SURFACE 02.01.02.0
update 06/2008
0212 230.000
Material: polyurethane, Colour: black
Properties: light, high strength and flexible, resistant to climate influences. Dimensions of mudguards stated in the table are only for orientation
TT-number B
width mm
R radius
mm
L length
mm
S span mm
Q weight kg / ks
0213 450.000 450 660 800 750 1,5
0213 650.000 650 670 650 1,4
0213 660.000 660 670 800 750 2,0
0213 651.000 650 800 3,1
TT-number B
width mm
H height
mm
diametr of the hole x span
mm
B1 width of the
mudflaps mm
Q weight kg / pcs
0217 400.000 400 550 3 x 95 350 1,6
0217 540.000 540 550 3 x 140 500 2,0
0217 620.000 620 550 3 x 165 550 2,2
MUDGUARDS PLASTIC - QUARTERS 02.01.03.0
update 01/2008
Material: polyurethane Colour: black
Dimensions of mudguards stated in the table are only for orientation These mudguards are used for direct installation on the front or back part behind the wheel. This is enabled by the wide installation area which is equipped with holes. For installation no further holder is necessary. The lower edge of the mudguard is doubled and creates the groove which is used for installing the fender flap
Material: polyethylene,
Colour: black Properties: light, high strength and flexible, resistant to climate influences. Dimensions of mudguards stated in the table are only for orientation
TT-number Name B
width mm
H height
mm
Q weight kg / pcs
0213 490.000 Mudguard plastic 490 / 608 490 608 1,97
0213 490.100 Mudguard plastic 490 / 412 490 412 1,36
0213 490.010 Adjustable mudguard console ø 42 mm 0,29
0213 490.020 Adjustable mudguard console ø 52 mm 0,46
02.01.03.1 MUDGUARDS PLASTIC - QUARTERS
update 11/2006
0213 490.010 0213 490.020
Material: polyethylene,
Colour: black Properties: light, high strength and flexible, resistant to climate influences Dimensions of mudguards stated in the table are only for orientation
Single-axle
TT-number Name Quantity
pcs Weight Q
kg / pcs
0214 100.000 Mudguard plastic three-part 1 set 9,0
Individual parts of the set and number of pieces
0214 101.000 Mudguard plastic three-part, side part 2 1,9
0214 102.000 Mudguard plastic three-part, central part 1 2,8
0214 103.000 Joining part, long 4 0,5
0214 104.000 Joining part, short 4 0,06
0214 105.000 Tension rubber 4 0,04
MUDGUARDS PLASTIC THREE - PART 02.01.04.0
update 05/2004
0214 105.000
0214 104.0000214 103.000
0214 101.000
0214 102.000
Material: polyethylene,
Colour: black Properties: light, high strength and flexible, resistant to climate influences Dimensions of mudguards stated in the table are only for orientation
Two-axle and three-axle
For axle-base up to1400 mm, two side parts are used 0214 450.000 / 0214 650.000 For axle base from 1400 mm to 2900 mm, central part 0214 451.000 / 0214 is added
TT-number Name Width mm
Weight Q kg / pcs
0214 450.000 Mudguard plastic three-part, side part 450 5,5
0214 451.000 Mudguard plastic three-part, central part 450 5,0
0214 650.000 Mudguard plastic three-part, side part 650 6,5
0214 651.000 Mudguard plastic three-part, central part 650 6,0
MUDGUARDS PLASTIC THREE - PART MULTI-AXLE 02.01.05.0
update 05/2004
central part 0214 451.000 0214 651.000
Material: galvanized sheet and outer plastic edge
Colour: galvanized + black plastic Dimensions of mudguards stated in the table are only for orientation
Single-axle
TT-number B
width mm
R radius
mm
S span mm
H height
mm
Q weight kg / ks
dimensions of tires
0215 200.000 200 390 750 390 2,9 13“
0215 220.000 220 410 800 410 3,3 14“
Two-axle
TT-number
B width mm
R radius
mm
S span mm
H height
mm
Q weight kg / ks
dimensions of tires
0215 221.000 220 380 1540 390 5,2 13“ + 14“
0215 650.000 650 2740 690 15,0
0215 650.100 650 650 2740 730 32,8
0215 650.200 650 2740 17,6
Possibility to produce other widths.
MUDGUARDS COMBI 02.01.06.0
update 01/2008
Material: polyethylene Colour:black
Properties: light, high strength and flexible, resistant to climate influences Dimensions of mudguards stated in the table are only for orientation
Used for the front wheels of tractors .
TT-number
B width mm
R radius
mm
L length
mm
Q weight kg / pcs
Indicted by the Zetor number
0216 230.000 230 540 900 1,1 7011.7006
0216 315.000 315 680 1130 1,4 78.383.901
0216 355.000 355 720 1245 1,8 10.383.903
MUDGUARDS PLASTIC TRACTOR 02.01.07.0
update 05/2004
Material: AlMg 3
TT-number
B width mm
R radius
mm
S span mm
H height
mm
L length
mm
Distance of axles mm
Weight kg
0217 650.000 655 650 2750 650 3530 1450 19,4
02.01.08.0MUDGUARDS MULTI-AXLE – AL QUINTET
update 08/2004
Used for installing of mudguards to the chassis of the vehicle, 2 holders are used for 1 mudguard, the holder has two consoles
ø 42 mm is used for smaller cars and light mudguards, for heavier mudguards we recommend to use a ø 54 mm
Spare part: 0221 001.000 0221 002.000 0221 042.000 Flange for mudguard holder ø 42 mm Holder of the mudguard ø 42 mm Blind flange ø 42 mm Material: galvanized steel Tube with 2 consoles and blind flange Weight: 0,02 kg Weight: 0,6 kg Material: galvanized steel Weight. 1,6 kg Assembly manual: To prevent possible breaking of the flange, its position and the length of the insertion of the tube are important. The feet of the flange for clamping of the tube must be in a horizontal position (parallel to the ground) and the tube must be inserted along the whole length of the tube. The inside holder console is freely placed on the tube and must be fixed firmly to the tube after installing on the mudguard, e.g. with rivets.. 0221 010.000 Holder of the mudguard ( tube with flage ) Material: steel, black comaxit Weight: 1,4 kg Used for the AVIA 60/75 type. The connecting dimensions of the holes for installing the rectangular holders correspond to the dimensions of the previously drilled holes on the chassis of the car
MUDGUARD FIXING KIT ø 42 02.02.01.0
update 12/2005
0221 001.000
0221 006.600 Holder of the mudguard with blind flange ø 42.4 mm; L = 600 mm (tube with flange ) Material: galvanized steel Weight : 1,5 kg 0221 006.700 Holder of the mudguard with blind flange ø 42.4 mm; L = 700 mm (tube with flange ) Material: galvanized steel Weight: 1,6 kg
Holder of the mudguard
Blind flange
Holder of the mudguard ø 42 with bolt and blind flange
TT-number L
mm Material Weight
kg 0221 030.600 600
galvanized steel
1,8
0221 030.700 700 1,96
0221 030.800 800 2,3
MUDGUARD FIXING KIT ø 42 02.02.02.0
update 11/2006
0221 031.000 Holder of the mudguard ø 42mm, s=2 mm
Material: galvanized steel Weight: 1,1 kg
0221 001.000 Flange for mudguard holder ø 42 mm
0221 042.000 Blind flange ø 42 mm
0221 031.000 Holder of the mudguard ø 42mm
0221 017.000 0221 018.000 Short console without counterpart Long console pro R = 550 mm without counterpart Material: galvanized steel Weight: 0,6 kg Weight: 0,3 kg 0221 019.000 Long console pro R = 650 mm without counterpart Material: galvanized steel Weight: 0,6 kg 0221 020.000 Counterpart for console Material: galvanized steel Weight: 0,2 kg
02.02.02.1 MUDGUARD FIXING KIT ø 42 - CONSOLES
update 01/2008
0221 022.000 Adjustable plastic console ø 42 mm
Material: plastic Colour: black Weight: 0.34
0221 020.000 Counterpart Material: galvanized steel Weight : 0,29 kg
0221 015.000 Console Material: galvanized steel Weight: 0,3 kg
0221 016.000 Adjustable console Material: galvanized steel Weight: 0,5 kg Enables the comfortable assembly of the mudguard and setting the position of the holder
0221 021.000 Plastic console ø 42 mm - fixed
including joining material Material:black plastic
Weight: 0.2 kg
Used for attaching mudguards to the chassis of the vehicle, 2 holders are used for 1 mudguard, the holder has two consoles
ø 54 mm is used for greater cars and heavier mudguards Spare part: 0222 001.000 0222 002.000 0222 054.000 Flange for mudguard holder Holder of the mudguard Blind flange ø 54 mm Material: galvanized steel Tube with consoles and 2 blind flanges Weight: 0,02 kg Weight: 0,6 kg Material: galvanized steel Weight: 1,6 kg Assembly manual: The tube must be inserted along the whole length of the flange. The inside holder console is freely placed on the tube and must be fixed firmly to the tube after attaching onto the wing, e.g. by rivets. .
MUDGUARD FIXING KIT ø 54 02.02.03.0
update 01/2008
0222 001.000
0222 022.000 Adjustable plasic console ø 54 mm, including joining material Material:black plastic Weight: 0,3 kg
0222 002.000
Blind flange
0222 010.000 Holder of the mudguard Tube with 2 plastici consoles and blind flange Material: tube -galvanized steel Weight : 2,2 kg / set
0222 002.740 Tube d = 54 mm ; L = 740 mm Material: galvanized steel Weight: 1,9 kg / ks
0222 021.000 Plastic console ø 54 mm - fixed including joining material Material: black plastic Weight: 0,3 kg
Madflaps are rubber, pressed, have reinforced edges with vertical growth on the up and down which ensures good strength and rigidity.
The smooth surface between the grooving can be used for the logo according to the specification of the customer, hardness approximately 80 Shore A, thermally stable from -30° to + 70°C.
Material: rubber mixture Colour: black
Fixing bars are shorter by 20 mm than the madflaps and are delivered inclusive of joining material. The bars are galvanized strips, the surface is black comaxit.
Madflaps Fixing bars
TT-number Width
B mm
Height H
mm
Weight Q
cca kg / pcs TT-number
Weight Q
cca kg / pcs
0231 240.260 240 260 0,35
0231 260.260 260 260 0,35 0231 261.000 0,05
0231 300.300 300 300 0,55 0231 301.000 0,05
0231 350.300 350 300 0,65 0231 351.000 0,05
0231 400.300 400 300 0,75 0231 401.000
0,05
0231 400.400 400 400 0,85 0,05
0231 450.400 450 400 0,95 0231 451.000
0,05
0231 450.300 455 300 0,90 0,05
0231 500.300 500 300 0,95 0231 501.000
0,05
0231 500.400 500 400 1,05 0,06
0231 550.300 550 300 0,90 0231 551.000
0,06
0231 550.400 550 400 1,45 0,06
0231 600.300 600 300 1,00
0231 601.000
0,06
0231 600.350 600 350 1,15 0,06
0231 600.400 600 400 1,60 0,06
0231 650.300 650 300 1,15 0231 651.000
0,06
0231 650.400 650 400 1,80 0,06
MADFLAPS 02.03.01.0
update 04/2002
0232 250.000
Composite madflaps for trailers and vehicles, including mounting bars, Dimension: 2400 mm x 350 x 4 mm
Material: plastic Weight: 5,5 kg
MADFLAPS COMPOSITE 02.03.02.0
update 02/2011
TT-number Width
B mm
Height H
mm
Thickness S
mm
Weight Q
cca kg / pcs
0233 250.250 250 250 3 0,35
0233 350.350 350 350 3 0,6
0233 400.300 400 300 3 0,6
0233 450.350 450 350 3 0,8
0233 530.370 530 370 3 1,0
0233 620.400 620 400 3 1,25
02.03.02.1 MADFLAPS - STANDART LINE
update 03/2011
Material : PVC Material: PVC Hardness 60 / 75, thermally stable from – 35° to + 40°, fire-proof
Colour of the fender flap: black Fixing bars are part of the delivery, including joining material
It is possible to place a logo on the madflaps.
Colour of logo: 1-3 colour Example:
1x colour
2x colour
3x colour
TT- number Width
B mm
Height H
mm
Thickness S
mm
Weight Q
cca kg / pcs
0234 220.260 220 260 4 0,45
0234 240.340 240 340 4 0,60
0234 260.300 260 300 4 0,60
0234 350.300 350 300 4 0,75
0234 400.250 400 250 4 0,75
0234 400.300 400 300 4 0,90
0234 400.350 400 350 4 1,10
0234 450.250 450 250 4 1,12
0234 450.350 450 350 4 1,15
0234 530.250 530 250 4 1,0
0234 530.370 530 370 4 1,45
0234 620.400 620 400 4 1,85
0234 650.400 650 400 4 1,90
0234 720.400 720 400 4 2,10
02.03.02.2 MADFLAPS - QUALITY LINE
update 03/2011
Material : PVC Material: PVC Hardness 60 / 75, thermally stable from – 35° to + 40°,
fire-proof Colour of the fender flap: black Fixing bars are part of the delivery, including joining material
Madflaps are certified according to TÜV It is possible to place a logo on the
madflaps. Colour of logo: 1-3 colour
Example:
1x colour
2x colour
3x colour
TT-number Width
B mm
Height H
mm
Thickness mm
Weight Q
cca kg / pcs
0235 220.260 220 260 4 / 14 0,50
0235 240.340 240 340 4 / 14 0,70
0235 260.300 260 300 4 / 14 0,70
0235 350.300 350 300 4 / 14 0,90
0235 400.250 400 250 4 / 14 0,90
0235 400.300 400 300 4 / 14 1,10
0235 400.350 400 350 4 / 14 1,20
0235 450.250 450 250 4 / 14 1,25
0235 450.350 450 350 4 / 14 1,35
0235 530.250 530 250 4 / 14 1,15
0235 530.370 530 370 4 / 14 1,65
0235 620.400 620 400 4 / 14 2,10
0235 650.400 650 400 4 / 14 2,20
0235 720.400 720 400 4 / 14 2,45
02.03.02.3 MADFLAPS – ANTI SPRAY
update 03/2011
Material : PVC Hardness 60 / 75, thermally stable from – 35° to + 40°, fire-proof
Colour of the madflap: black Fixing bars are part of the delivery, including joining material
Thickness of the plate of the madflap s=4mm Thickness of the madflap, including ANTI-SPRAY is 14 mm
Madflaps are certified according to TÜV-PFALZ
It is possible to place a logo on the madflaps.
Colour of logo: 1-3 colour Example:
1x colour
2x colour
3x colour
TT-number Width
B mm
Height H
mm
A mm
C mm
Thickness mm
Weight Q
cca kg / pcs
0236 350.450 350 820 330 450 4 / 14
0236 400.450 400 820 330 450 4 / 14
0236 450.450 450 820 400 450 4 / 14
0236 530.450 530 820 450 450 4 / 14
0236 620.450 620 820 550 450 4 / 14
0236 650.450 650 820 600 450 4 / 14
02.03.02.4 MADFLAPS ANTISPRAY – INSERT LINE
update 01/2007
Material : PVC Hardness 60 / 75, thermally stable from – 35° to + 40°, fire-proof
Colour of the madflap: black Thickness of the plate of the madflap s=4mm
Thickness of the madflap, including ANTI-SPRAY is 14 mm
Madflaps are certified according to TÜV-PFALZ
It is possible to place a logo on the madflaps.
Colour of logo: 1-3 colour
Lockable, closing arresters in three directions, rubber sealing along the perimeter.
Material: polyethylene Colour: black, max. temperature: - 30 - + 75°C
Toolboxes Accessories
TT-number Width
B mm
Height H / h mm
Depth T / t mm
Span mh2 mm
Span mh4 mm
Weight Q
kg / pcs
Holder for box Drawer
TT-number Weight kg / pcs
TT-number Weight kg / pcs
0242 066.000 660 500 460 230 498 7,50 0242 366.000 0,43 0242 466.000 1,40
0242 067.000 660 500 665 350 498 9,50 0242 367.000 0,50 0242 467.000 2,00
0242 068.000 660 500/205 665/460 230 498 8,50 0242 366.000 0,43 0242 466.000/.467 000 1,4 / 2,0
Spare parts usable for all types of boxes: 0242 469.000 locking with dos. lock, Weight 0,15kg / pcs
box type 0242 068.000 has the form enabling partial location under the beam Material and surface treatment of holders: steel area 40 x 5 mm, surface black comaxit
Assembly manual: The long service life and functionality of the box and its correct fixation to the vehicle are stated. For this purpose, we recommend using holders which we deliver to selected types of boxes. Take care to ensure the correct location of the holder (the holder is located from the inside) towards the box so to prevent deformation of the movement of the box. For fixing to the floor or the frame use bolts. The lock must be lubricated 1x in 14 days (we recommend graphite). Items located in the box must have free movement to prevent damage to the cap. Before driving, check that the box is properly closed and locked. In the box in the bottom there must be glued wood which distributes the point loading of the bottom.
TOOLBOXES 02.04.02.0
update 10/2006
Toolbox: 0242 068.000
holder: 0242 366.000 0242 367.000
Lockable, locking arresters in three directions, rubber sealing along the perimeter with round cross-section, the lock has a plotter which protects it against climatic conditions; the box has fixation units along the perimeter.
Material: polyethylene
Colour: black
Toolboxes Accessories and spare parts
TT-number Width
A mm
Depth H
mm
Height B
mm
Width a1 mm
Height b1 mm
Weight Q
kg / pcs
Holder for box Spare cap
TT-number H mm
Q kg / pcs
TT-number Q kg / pcs
0244 060.400 600 470 400 530 330 4,6 0241 301.450 450 0,85 0244 360.400
0244 064.530 640 490 530 0241 301.550 550 1,00 0244 364.530
0244 080.480 800 470 480 720 400 7,5 0241 301.550 550 1,00 0244 380.480
Assembly manual: We recommend to secure items in the box against self-movement and to put glued wood on the bottom which ensures the allocation of the load. It is possible to use for the boxes the so-called “Z” holders which are attached to the boxes by M8 carriage bolts with self securing nuts. Inside the box we recommend to use instead of the pad steel area, the pads for wooden constructions ČSN 02 1729 ( 02 1727).
As the box is conical when using holders, the bottom is not in parallel to the ground. MAGIC BOX is the latest series of toolboxes. It is made of polyethylene using the rotary method.
The box is fitted with a security system against self-opening.
TOOLBOXES – NOVA BOX 02.04.03.0
update 04/2008
Material: polyethylene, Colour: black, max. temperature -70 to + 100 °C
Tool boxes Accessories
TT-number Width
L mm
Depth D
mm
Height H
mm
Max nosnost
kg
Weight Q
kg / pcs
Holder for boxes
TT-number set „Z“
TT-number set„Z + U“
H 1 mm
Weight kg / pcs set „Z“
0241 204.000 400 370 350 45 3,92 0241 301.450 - 450 3,4
0241 205.000 500 370 400 55 6,55 0241 301.450 - 450 3,4
0241 202.000 600 470 400 65 0241 301.450 - 450 3,4
0241 206.000 600 470 450 65 9,46 0241 301.550 - 450 3,4
0241 207.000 700 600 500 0241 301.550 - 550 4,0
0241 208.000 800 490 500 65 12,71 0241 301.550 0241 302.085 550 4,0
0241 209.000 800 490 400 0241 301.450 0241 302.084 450 3,4
0241 210.000 1000 490 500 70 15,94 0241 301.550 0241 302.105 550 4,0
0241 211.000 1000 490 400 0241 301.450 0241 302.104 450 3,4
02.04.03.1TOOLBOXES
update 11/2006
0241 302.xxx Set Z+U
The set contains 4 pieces “Z“ and 2 pieces “U““
The form of the box with two
closures is valid for: 0241 210.000 0241 211.000
0241 301.450 0241 301.550
Set „Z“ The set contains 4
pieces “ Z“.“
Assembly manual: The long service life and functionality of the box and its correct fixation to the vehicle are stated. Boxes are used for horizontal assembly: For mounting on the vehicle, use our holders. Take care to ensure the correct location of the holder towards the box so there is no deformation of bending the box. In the case of not keeping with the requirements, we cannot guarantee the tightness of the box. For the fixation to the floor or frame, use an M 8 galvanized fixation bolt, for the fixation of the box to the holder use an M8 galvanised carriage bolt. The lock must be lubricated 1x in 14 days (we recommend graphite). Items located in the box must have free movement to prevent damage to the cap. Before driving, check that the box is properly closed and locked. In the box at the bottom there must be glued wood which distributes the point loading of the bottom.
MAGIC BOX Cap of the box Locking of the box,
including the cover for all types of boxes
PVC cover for boxes
TT-number TT-number TT-number TT-number
0241 204.000 0241 254.000
0241 250.000 0241 251.000
0241 205.000 0241 255.000
0241 202.000 0241 252.000
0241 206.000 0241256.000
0241 207.000 0241 257.000
0241 208.000 0241 258.000
0241 209.000 0241 259.000
0241 210.000 0241260.000
0241 211.000 0241 261.000
02.04.03.2 TOOLBOXES – SPARE PARTS
update 08/2006
0241 205.000 – 0241 211.000 0241 250.000
Spare part Holder profile „U“ 0241 302.080 L=780 mm for boxes 0241 208.000; 0241 209.000 0241 302.100 L=980 mm for boxes 0241 210.000; 0241 211.000
Spare part Holder profile „Z“ 0241 302.450 H1=450 mm 0241 302.550 H2=550 mm
Inside the box is a fixation belt for fire extinguishers. Colour: red
Material: thermo plastic
TT-number
Weight of fire boxes
kg
Height H
mm
Width A
mm
Depth B
mm
0251 001.000 6 565 300 175
FIREBOXES – UNICO 6 02.05.01.0
Boxes produced in a rotary manner have a double wall, fixation belt and sealing. They are delivered in the variant for one or two fire extinguishers
.
TT-number Weight of fire
boxes kg
Height H
mm
Width A
mm
Depth B
mm
Colour cap / others
0251 002.000 6 / 9 710 340 240 red / black
0251 003.000 6 / 9 740 570 240 red / black
TT-number Weight of fire
boxes kg
Height H
mm
Width A
mm
Depth B
mm
Colour cap / others
0251 004.000 6 635 277 277 red / black
update 10/2009
FIREBOXES – GRISU 6-9 02.05.02.0
0251 002.000 0251 003.000
For two fire boxes
Water tanks 30 and 50 litres
Colour: white Material: polyethylene
TT-number Volume in litres
Diametr A
mm
Dimens B
mm
Dimens C
mm
Length L
mm
Weight Q
kg / pcs
Tank holder (left + right )
TT-číslo Q kg / set
0251 030.000 30 300 340 390 475 2,70 0251 131.000 4,60
0251 050.000 50 375 430 470 500 3,20 0251 131.000 4,60
Discharge valve and screw plug are made of plastic and are part of the tank
0251 301.000 discharge valve,plastic 0,10 kg / pcs 0251 302.000 plug, plastic 0,10 kg / pcs
0251 303.000 soap dosing 0.20 kg / pcs
It is possible to replace the plug with the soap dosing unit which is equipped with threads and also serves for closing the tank.
Attention: when mounting the tank on to the holders, use bolt M8 with a maximum length of 20 mm, In the tank in the case of a longer length of the bolt, breaking or release of the cast nut and penetration of the liquid can occur, for this
reason it is necessary to tighten these bolts carefully to prevent the release the cast nut.
WATER TANKS 02.05.03.0
update 08/2006
0251 303.000 0251 131.000
TT-number Name Material/Color Weight Q kg / pcs
0251 030.100 Water tanks 30 litres Polyethylene / black 2,10 0251 303.000 Soap dosing device Polyethylene / white 0,06
Spare parts
0251 302.000 Plug for the tank, threading plastic 0,10 0251 301.100 Discharge valve plastic 0,10
The discharge valve and plug are part of the tank. It is possible to replace the plug with the soap dosing unit which is equipped with threads and also serves for closing the tank.
02.05.03.1 WATER TANKS
update 08/2006
0251 303.000 0251 131.000