Moulding & Millwork - Mission Building...

31
Moulding & Millwork The Builder’s preference for innovative ideas and superior quality. Moulding Selection Guide 2006 Prairies Edition

Transcript of Moulding & Millwork - Mission Building...

Page 1: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Moulding & MillworkThe Builder’s preference for innovative

ideas and superior quality.

Moulding Selection Guide2006 Prairies Edition

Page 2: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Baseboard #422

Casing #421

option 7

Baseboard #405

Casing #403

option 9

Casing #338

Baseboard #238

option 8

Casing #423

Baseboard #425

option 10

Baseboard #379

Casing #373

option 12

Baseboard #163

Casing #092

Baseboard #8263

Casing #8063

Shoe #3288

Baseboard #161

Casing #324

Shoe #937

Baseboard #545

Casing #535

option 5

Baseboard #412

Casing #411

option 6

Baseboard #326

Casing #324

option 4

Casing #908

Baseboard #094

option 11

option 2 option 3option 1

Case / Base Combinations - Paintable

Moulding Selection Guide

Page 3: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Case / Base Combinations - Stainable

Moulding Selection Guide

option 4

option 5

Casing #401

Baseboard #402

option 6

Casing #3127

Baseboard #412

Casing #444

Baseboard #3140

option 7 option 8

option 1

option 3

Baseboard #412

Casing #411

option 2

Casing #1208B

Crown #3244

S4S 1x8

Casing #1208

Baseboard #663

Casing #3126

S4S 1x8

Baseboard #422

Casing #421

Page 4: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Panel Mould#3278

Crown#48

option 6

Crown#51

Casing#625

Casing#625

option 7 option 8

Crown#587

option 9

Crown#99

Crown #41

Crown #583

Baseboard #93

Baseboard#93

option 2

option 5

Crown#47D

S4S1x3

S4S1x3

S4S1x3

S4S1x3

S4S1x3

Crown #46

Baseboard#412

Baseboard #412

option 1

option 4

option 3

Architrave#5000

Crown #48

Crown #48

Ceiling Trim Options (Crowns) - Paintable

Moulding Selection Guide

Page 5: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Panel Mould#3278

Crown#48

S4S1x3

option 2

Crown#51

Architrave#5000

option 4

Crown #46

Crown #55

Crown #55

Baseboard #412

Baseboard #412

Crown #48

Baseboard #411

Baseboard #411

Crown #55

Baseboard #444

Baseboard #444

option 1

option 3

option 6option 5

Ceiling Trim Options (Crowns) - Stainable

Moulding Selection Guide

Page 6: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

option 1

Paintable/Stainable

S4S1x4

Crown#47

Panel Mould#3275

option 5

Paintable

S4S1x8

Crown#47D

Baseboard#412

option 3

Paintable

S4S1x8

Crown#48

Baseboard#161

Paintable

option 7

S4S1x8

Crown#587

S4S1x8

Baseboard#8263

option 2

PanelMould#3275

Crown#51

Crown#710

Crown #712

Architrave#5000

option 6

Paintable

S4S1x8

option 4

Paintable/Stainable

Paintable/Stainable

Crown#3244

S4S1x8

Baseboard#3603

S4S1x8

Crown#46

PanelMould#3277

Panel Mould#3279

Mantel Trim Options

Moulding Selection Guide

Page 7: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

option 2

option 5

Architrave#5000

Casing#3126

Casing#423

Casing#8233

S4S1x4

Crown#51

Crown#3244

Casing#324

Window Stool#509

Architrave#5010

Casing#3127

Architrave#450

option 6

Paintable

Paintable

option 8 S4S1x3

Stop#936

Panel Mould#3275 S4S

1x3

Crown#51

Crown#47

Paintable/Stainable

Paintable

Casing#936

S4S1x3

Crown#47

option 10

Paintable/Stainable

Casing#1208B

Casing#1208B

S4S1x6

Panel Mould#3278

option 1

Paintable/Stainable

S4S1x4

Crown#3248

Panel Mould#3279

S4S1x6

option 3

Paintable/Stainable

Paintable/Stainable

S4S1x6Crown

#3244

Casing#411`

option 9

Casing#625

Baseboard#623

Lip Mould#9531

option 4

Paintable

option 7

Paintable

Architrave#5030

Casing#535

Casing#1208

Door & Window Trim Options (Headers)

Moulding Selection Guide

Page 8: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Panel Mould#3725

Baseboard#412Stop #936

Paintable

option 9

S4S1x3

Crown#3248

Paintable/Stainable

Paintable

option 2

option 11

S4S1x3

Crown#3248B

Paintable

Paintable/Stainable Paintable/Stainable

option 6

Panel Mould#3278

Chair Rail#297

Casing#324

Crown#3242

option 8

Wainscot#292

Wainscot#222

Baseboard#238

Paintable

option 10

Wainscot#850

Wainscot#222

Baseboard#163

Paintable

Paintable/Stainable

option 7

Crown#3242

S4S1x5

Crown#3242

Paintable/Stainable

option 4

Cove#3264

Half Round#3216

Cove#3264

Crown#51

S4S1x4

option 5

Baseboard#663

Paintable/Stainable

Crown #3244Panel Mould#3277

option 1

Plywood 3/4

Plywood 1/4

S4S 1x6

S4S 1x4

S4S 1x4

S4S 1x3

Crown#3288(inset)

Crown #3245

option 3

Stop #3288

Wall Trim Options (Wainscot & Chair Rail)

Moulding Selection Guide

Page 9: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Casings

Moulding Selection Guide

Casings define the overall character of a room and are oftenthe most visible part of the trim. They are used primarily tocover the gap between drywall and the door or window frame.Casings are generally thicker than the base mouldings.ALL SIZES NOMINAL

3005 CASE BDL1/2˝ x 1-1/2˝ FJ Primed 30

1208 CASE BDL5/8˝ x 2-1/2˝ FJ Primed 1011/16˝ x 2-1/2˝ Hemlock 103/4˝ x 2-5/8˝ Red Oak 103/4˝ x 2-5/8˝ Maple 10

092 CASE BDL5/8˝ x 2-1/2˝ MDF Primed 6

093 CASE BDL5/8˝ x 3-1/4˝ MDF Primed 6

535 CASE BDL11/16˝ x 3-1/2˝ Ultralite 511/16˝ x 3-1/2˝ MDF Primed 6

410 CASE BDL1/2˝ x 2-1/4˝ MDF Primed 1018mm x 2-1/4˝ Ultralite 10

411 CASE BDL5/8˝ x 3˝ Knotty Pine 55/8˝ x 3˝ Red Oak 105/8˝ x 3˝ Maple 105/8˝ x 3˝ FJ Primed 1011/16˝ x 3˝ Ultralite 811/16˝ x 3˝ MDF Primed 6

411A CASE BDL5/8˝ x 3-1/4˝ MDF Primed 6

Page 10: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

373 CASE BDL9/16˝ x 2-1/2˝ MDF Primed 6

357 CASE BDL7/16˝ x 2-1/8˝ Hemlock 10

356 CASE BDL3/8˝ x 1-15/16˝ FJ Unfinished 103/8˝ x 2˝ FJ Unfinished 207/16˝ x 2-1/16˝ Red Oak 101/2˝ x 2-1/16˝ Maple 101/2˝ x 2-1/8˝ Knotty Pine 101/2˝ x 2-1/8˝ Veneer Wrap Oak 103/8˝ x 2-3/16˝ FJ Primed 203/8˝ x 2-1/4˝ MDF Primed 107/16˝ x 2-1/4˝ FJ Primed 127/16˝ x 2-1/4˝ Ultralite 109/16˝ x 2-1/4˝ MDF Primed 10

401 CASE BDL3/8˝ x 2-1/2˝ Red Oak 103/8˝ x 2-1/2˝ Maple 107/16˝ x 2-1/2˝ FJ Primed 101/2˝ x 2-1/2˝ MDF Primed 10

401A CASE BDL3/8˝ x 2-1/4˝ MDF Primed 10

421 CASE BDL9/16˝ x 2-3/16˝ Red Oak 109/16˝ x 2-1/4˝ MDF Primed 6

356WM CASE BDL5/8˝ x 2-1/4˝ FJ Primed 10

Casings

Moulding Selection Guide

Casings define the overall character of a room and are oftenthe most visible part of the trim. They are used primarily tocover the gap between drywall and the door or window frame.Casings are generally thicker than the base mouldings.ALL SIZES NOMINAL

356A CASE BDL3/8˝ x 2˝ FJ Primed 20

Page 11: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Casings

Moulding Selection Guide

403 CASE BDL5/8˝ x 3˝ MDF Primed 6

625 CASE BDL3/8˝ x 2-1/4˝ FJ Primed 10429 CASE BDL

3/4˝ x 2-1/4˝ MDF Primed 6

423 CASE BDL5/8˝ x 3˝ MDF Primed 6

386 CASE BDL9/16˝ x 2-1/4˝ MDF Primed 6

338 CASE BDL5/8˝ x 3˝ MDF Primed 6

8063 CASE BDL11/16˝ x 3-1/4˝ Ultralite 8

8233 CASE BDL9/16˝ x 3-1/4˝ Ultralite 10

Casings define the overall character of a room and are oftenthe most visible part of the trim. They are used primarily tocover the gap between drywall and the door or window frame.Casings are generally thicker than the base mouldings.ALL SIZES NOMINAL

Page 12: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

3126 CASE BDL3/4˝ x 3-1/4˝ Red Oak 63/4˝ x 3-1/4˝ Maple 63/4˝ x 3-1/4˝ MDF Primed 6

3181 CASE BDL3/4˝ x 4-1/16˝ MDF Primed 6

3600 CASE BDL9/16˝ x 2-1/2˝ Red Oak 49/16˝ x 2-1/2˝ Maple 4

3601 CASE BDL3/4˝ x 3-1/2˝ Red Oak 43/4˝ x 3-1/2˝ Maple 4

3603 CASE BDL3/4˝ x 5-1/2˝ Red Oak 13/4˝ x 5-1/2˝ Maple 43/4˝ x 5-1/2˝ MDF Primed 1

3000 CASE BDL7/16˝ x 1-3/8˝ FJ Primed 307/16˝ x 1-7/16˝ Red Oak 101/2˝ x 1-1/2˝ Hemlock 20

3002 CASE BDL3/8˝ x 2-3/16˝ FJ Primed 201/2˝ x 2-3/16˝ Hemlock 103/8” x 2-1/4˝ MDF Primed 207/16˝ x 2-1/4˝ Red Oak 10

Casings

Moulding Selection Guide

Casings define the overall character of a room and areoften the most visible part of the trim. They are usedprimarily to cover the gap between drywall and thedoor or window frame. Casings are generally thickerthan the base mouldings.ALL SIZES NOMINAL

Page 13: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

3130 CASE BDL1/2˝ x 2-1/4˝ FJ Primed 20

3125 CASE BDL9/16˝ x 3-3/16˝ Red Oak 101/2˝ x 3-1/4˝ FJ Primed 20

907 CASE BDL9/16˝ x 2-1/4˝ Ultralite 10

340 CASE BDL9/16˝ x 3-1/4˝ MDF Primed 5

341 CASE BDL9/16˝ x 3-3/8˝ MDF Primed 5

908 CASE BDL9/16˝ x 3-1/4˝ Ultralite 7

3129 CASE BDL3/4˝ x 2-1/2˝ Red Oak 103/4˝ x 2-1/2˝ Maple 6

Casings

Moulding Selection Guide

Casings define the overall character of a room and are oftenthe most visible part of the trim. They are used primarily tocover the gap between drywall and the door or window frame.Casings are generally thicker than the base mouldings.ALL SIZES NOMINAL

3127 CASE BDL3/4˝ x 3-1/4˝ Red Oak 103/4˝ x 3-1/4˝ Maple 63/4˝ x 3-1/4˝ MDF Primed 6

Page 14: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Baseboards

Moulding Selection Guide

Baseboards are placed along the wall at the floor.They should be chosen to work in harmony with your casings to finish and tie the room together.Baseboards are usually thinner than the casing.ALL SIZES NOMINAL

673 BASE BDL9/16˝ x 5-1/8˝ FJ Primed 6

545 BASE BDL9/16˝ x 5˝ Ultralite 55/8˝ x 5˝ MDF Primed 4

653 BASE BDL3/8˝ x 3-1/4˝ Hemlock 103/8˝ x 3-1/4˝ Red Oak 103/8˝ x 3-1/4˝ FJ Primed 103/8˝ x 3-1/4˝ MDF Primed 10

663 BASE BDL1/2˝ x 4-3/16˝ FJ Primed 91/2˝ x 4-3/16˝ MDF Primed 6

1208B BASE BDL5/8˝ x 3-15/16˝ Red Oak 65/8˝ x 3-15/16˝ Maple 6

663 BASE BDL7/16˝ x 4-1/4˝ Red Oak 6

410A BASE BDL3/8˝ x 3-1/4˝ MDF Primed 10

Page 15: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

412 BASE BDL5/8˝ x 4-3/16˝ Maple 69/16˝ x 4-1/4˝ Knotty Pine 69/16˝ x 4-1/4˝ Red Oak 69/16˝ x 4-1/4˝ FJ Primed 109/16˝ x 4-1/4˝ Ultralite 55/8˝ x 4-1/4˝ MDF Primed 6

412A BASE BDL5/8˝ x 5-1/4˝ MDF Primed 6

414 BASE BDL9/16˝ x 5-1/4˝ Ultralite 6

3140 BASE BDL5/16˝ x 3-3/16˝ Maple 105/16˝ x 3-1/4˝ Knotty Pine 103/8˝ x 3-1/4˝ Red Oak 103/8˝ x 3-1/4˝ FJ Primed 103/8˝ x 3-1/4˝ MDF Primed 10

Baseboards

Moulding Selection Guide

Baseboards are placed along the wall at the floor.They should be chosen to work in harmony with your casings to finish and tie the room together.Baseboards are usually thinner than the casing.ALL SIZES NOMINAL

502 BASE BDL9/16˝ x 3-1/4˝ MDF Primed

8910 BASE BDL3/8” x 3-7/8˝ MDF Primed 12

095 BASE BDL5/8˝ x 5˝ MDF Primed 6

500 BASE BDL9/16˝ x 4-1/8˝ MDF Primed

Page 16: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

205T BASE BDL1/2” x 3-7/8˝ Ultralite 10

163 BASE BDL9/16˝ x 7-1/4˝ Ultralite 4

Baseboards

Moulding Selection Guide

Baseboards are placed along the wall at the floor.They should be chosen to work in harmony with your casings to finish and tie the room together.Baseboards are usually thinner than the casing.ALL SIZES NOMINAL

379 BASE BDL9/16˝ x 3-7/8˝ MDF Primed 6

402 BASE BDL3/8˝ x 3-1/4˝ Red Oak 103/8˝ x 3-1/4˝ Maple 103/8˝ x 3-1/4˝ FJ Primed 101/2˝ x 3-1/4˝ MDF Primed 6

444 BASE BDL3/8˝ x 3-1/8˝ Red Oak 107/16˝ x 3-3/16˝ FJ Primed 10

094 BASE BDL5/8˝ x 4˝ MDF Primed 6

161 BASE BDL9/16˝ x 5-1/4˝ Ultralite 4

Page 17: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

431 BASE BDL5/8˝ x 3-1/4˝ MDF Primed 6

389 BASE BDL9/16˝ x 3-1/4˝ MDF Primed 6

405 BASE BDL1/2˝ x 4˝ MDF Primed 10

405A BASE BDL1/2˝ x 5˝ MDF Primed 4

3112 BASE BDL3/8˝ x 3-1/4˝ Hemlock 10

Baseboards

Moulding Selection Guide

Baseboards are placed along the wall at the floor. Theyshould be chosen to work in harmony with your casings tofinish and tie the room together. Baseboards are usuallythinner than the casing.ALL SIZES NOMINAL

623 BASE BDL3/8˝ x 3-1/4˝ FJ Primed 10

3102 BASE BDL7/16˝ x 3-1/4˝ Hemlock 10

425 BASE BDL1/2˝ x 4˝ MDF Primed 10

Page 18: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

3288 BDL7/16˝ x 11/16˝ Hemlock 251/2˝ x 11/16˝ FJ Primed 251/2˝ x 3/4˝ Red Oak 201/2˝ x 3/4˝ Maple 20

3287 BDL11/16˝ x 1-1/4˝ Hemlock 12

Base ShoesBase Shoes are primarily used to trim flooringmaterials and are often used in combination with atraditional baseboard to conceal variations betweenthe flooring and the base. This versatile profile worksgreat to solve numerous trimming needs.ALL SIZES NOMINAL

238 BASE BDL1/2˝ x 5˝ MDF Primed 1

8263 BASE BDL9/16˝ x 6-1/2˝ Ultralite 4

422 BASE BDL1/2˝ x 3˝ MDF Primed 69/16˝ x 3˝ Red Oak 10

8243 BASE BDL1/2˝ x 4-1/4˝ Ultralite 6

Baseboards

Moulding Selection Guide

Baseboards are placed along the wall at the floor.They should be chosen to work in harmony with your casings to finish and tie the room together.Baseboards are usually thinner than the casing.ALL SIZES NOMINAL

3120 BASE BDL5/8˝ x 2-1/8˝ Hemlock 10

Page 19: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

In classical architecture, it described the main beamresting on the tops of the columns. Today it is oftenused as a decorative moulding for ornamentation orfinishing at the top of windows and doors.ALL SIZES NOMINAL

5000 BDL1-1/8˝ x 3-3/4˝ Red Oak 61-1/8˝ x 3-3/4˝ Maple 21-1/4˝ x 3-3/4˝ MDF Primed 6

5010 BDL1-1/4˝ x 4-3/16˝ MDF Primed 4

5030 BDL1-3/16˝ x 6-1/4˝ Ultralite 2

450 BDL1-1/2˝ x 4-1/2˝ MDF Primed 4

3242 BDL7/16˝ x 11/16˝ Red Oak 201/2˝ x 11/16˝ Hemlock 251/2˝ x 11/16˝ FJ Primed 25

Rake MouldsRakes are often used as crowns. In fact, they aresometimes called “solid crowns”.ALL SIZES NOMINAL

3244 BDL3/4˝ x 1-1/4˝ FJ Primed 209/16˝ x 1-1/4˝ Hemlock 243/4˝ x 1-1/4˝ Knotty Pine 203/4˝ x 1-1/4˝ Red Oak 203/4˝ x 1-1/4˝ Maple 203/4˝ x 1-1/4˝ MDF Primed 6

3248 BDL1-3/16˝ x 2-3/8˝ MDF Primed 61-9/16˝ x 2-1/2˝ Red Oak 61-9/16˝ x 2-1/2˝ Maple 4

Architraves

Moulding Selection Guide

Page 20: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Rake Moulds

Moulding Selection Guide

Rakes are often used as crowns. In fact, they aresometimes called “solid crowns”.ALL SIZES NOMINAL

CrownsCrowns are placed along the wall at theceiling. They come in a wide range ofpatterns and sizes. Crowns soften thetransition from wall to ceiling while adding adistinctive look and charm to your room.ALL SIZES NOMINAL

3245 BDL1-1/8˝ x 1-7/8˝ Red Oak 61-1/8˝ x 1-7/8˝ MDF Primed 6

3248B BDL1-1/8˝ x 2-1/2˝ Red Oak 61-1/8˝ x 2-1/2˝ Maple 4

54 BDL1/2˝ x 2-1/4˝ Red Oak 101/2˝ x 2-1/4˝ FJ Primed 121/2˝ x 2-1/4˝ MDF Primed 6

47 BDL9/16˝ x 4-1/4˝ MDF Primed 65/8˝ x 4-1/4˝ Ultralite 69/16˝ x 4-9/16˝ FJ Primed 1011/16˝ x 4-9/16˝ Red Oak 611/16˝ x 4-5/8˝ Maple 6

51 BDL1/2˝ x 3-3/16˝ FJ Primed 1011/16˝ x 3-3/16˝ Maple 61/2˝ x 3-1/4˝ Red Oak 65/8˝ x 3-1/4˝ MDF Primed 63/4˝ x 3-1/4˝ Knotty Pine 6

Page 21: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Crowns

Moulding Selection Guide

Crowns are placed along the wall at the ceiling. Theycome in a wide range of patterns and sizes. Crownssoften the transition from wall to ceiling while addinga distinctive look and charm to your room.ALL SIZES NOMINAL

512 BDL9/16˝ x 5-1/4˝ MDF Primed 4

47D BDL9/16˝ x 4-3/16˝ Ultralite 8

710 BDL9/16˝ x 3-1/4˝ MDF Primed 4

712 BDL11/16˝ x 4-1/2˝ Ultralite 411/16˝ x 4-1/2˝ MDF Primed 4

Page 22: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Crowns

Moulding Selection Guide

Crowns are placed along the wall at the ceiling. Theycome in a wide range of patterns and sizes. Crownssoften the transition from wall to ceiling while addinga distinctive look and charm to your room.ALL SIZES NOMINAL

40 BDL11/16˝ x 4-1/4˝ Ultralite 6

587 BDL3/4˝ x 6-11/16˝ MDF Primed 4

41 BDL1-3/16˝ x 6-5/16˝ Ultralite 4

583 BDL3/4˝ x 4-3/8˝ MDF Primed 6

Page 23: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Crowns

Moulding Selection Guide

Crowns are placed along the wall at the ceiling. Theycome in a wide range of patterns and sizes. Crownssoften the transition from wall to ceiling while addinga distinctive look and charm to your room.ALL SIZES NOMINAL

46 BDL3/4˝ x 6-1/16˝ Red Oak 63/4˝ x 6-1/16˝ Maple 43/4˝ x 6-1/8˝ MDF Primed 4

99 BDL7/8˝ x 6-5/16˝ MDF Primed 4

55 BDL3/4˝ x 2-7/16˝ Maple 103/4˝ x 2-1/2˝ Red Oak 10

48 BDL5/8˝ x 3-13/16˝ Maple 611/16˝ x 3-13/16˝ Red Oak 63/4˝ x 4˝ MDF Primed 6

Page 24: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Chair Rails

Moulding Selection Guide

Chair Rails are practical as well as decorative. Applied toa wall, from 24 to 48 inches up from the floor, theyprotect the wall from scuffs and dents from the backs ofchairs as well as adding a distinctive accent to any room.ALL SIZES NOMINAL

297 BDL11/16˝ x 2-7/16˝ Maple 69/16˝ x 2-15/16˝ Red Oak 611/16˝ x 3˝ FJ Primed 1011/16˝ x 3˝ MDF Primed 5

125 BDL1-3/16˝ x 3-3/16˝ MDF Primed 1

Base CapsA decorative moulding installed flush against the wallon top of an S4S board. This will create a dramaticbaseboard effect. Also a versatile panel moulding thatcan be used for many finishing applications.ALL SIZES NOMINAL

CovesCoves are commonly used to soften thetransition on inside corners but may beused for a wide range of applications.

ALL SIZES NOMINAL

3264 BDL11/16˝ x 11/16˝ Hemlock11/16˝ x 11/16˝ Maple

3260 BDL1/2˝ x 1/2˝ Red Oak1/2˝ x 1/2” FJ Primed1/2˝ x 1/2” Hemlock

3264 BDL11/16˝ x 11/16˝ FJ Primed11/16˝ x 11/16˝ Red Oak11/16˝ x 11/16˝ Knotty Pine

165 BDL3/4˝ x 1-1/8˝ MDF Primed 1

15 BDL1/2˝ x 1-1/8˝ Red Oak 201/2˝ x 1-1/8˝ Maple 20

Page 25: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Wainscot & Ply Caps

Moulding Selection Guide

Wainscot is trimwork installed inthe area below a chair rail.Numerous options are availableincluding raised panel, shadow boxand beaded. Combined with achair rail and baseboard,Wainscoting creates a dramaticlook to any room.

The typical use of Ply Cap is totrim out and finish the upper edgeor top of a wainscot treatment orrough plywood edge to give it amore finished appearance.ALL SIZES NOMINAL

3725 (3/4˝ inset) BDL15/16˝ x 1-1/4˝ Red Oak 2015/16˝ x 1-1/4˝ Maple 20

3724 (1/2˝ inset) BDL3/4˝ x 1-3/16˝ Maple 203/4˝ x 1-3/16˝ FJ Primed 201-3/16˝ x 1-3/16˝ Red Oak 20

3720 (1/2˝ inset) BDL3/4˝ x 3/4˝ Red Oak 20

3721 (3/4˝ inset) BDL13/16˝ x 1˝ Red Oak 2013/16˝ x 1˝ Maple 20

292 (1/4˝ inset) BDL9/16˝ x 1-1/8˝ FJ Primed 25

850 (3/8˝ inset) BDL1-1/8˝ x 1-3/4˝ MDF Primed 4

B4 (3/8˝ inset) BDL3/4˝ x 1-1/2˝ Knotty Pine 203/4˝ x 1-1/2˝ Red Oak 203/4˝ x 1-1/2˝ FJ Primed 25

101 (1/4˝ inset) BDL1/2˝ x 1˝ FJ Primed 30

101 (3/4˝ inset) BDL1/2˝ x 1˝ Red Oak 201/2˝ x 1˝ Maple 20

B10 (3/8˝ inset) BDL3/4˝ x 1-1/4˝ Red Oak 20

222 BDL3/8˝ x 5-3/4˝ MDF Primed 1

Page 26: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

0010 BDL7/16˝ x 1-1/2˝ Hemlock 20

3294 BDL5/16˝ x 1-1/2˝ Red Oak 205/16˝ x 1-5/8˝ FJ Primed 203/8˝ x 1-5/8˝ Maple 20

0001 BDL7/16˝ x 2-3/16˝ Hemlock 10

3296 BDL5/16˝ x 2-1/4˝ Red Oak 103/8˝ x 2-1/4˝ Maple 207/16˝ x 2-1/4˝ FJ Primed 20

Door Stops & Battens

Moulding Selection Guide

The Door Stop mouldings are attached to the door jamb onboth sides and at the top. It is where the door comes to arest when it is closed stopping the door from moving anyfurther, and covering the gap that would otherwise appearbetween the door and the jambs.

A Batten is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards.ALL SIZES NOMINAL

3278 Ogee Batten BDL3/8˝ x 1-1/8˝ Red Oak 303/8˝ x 1-1/8˝ Maple 303/8˝ x 1-1/8˝ FJ Primed 25

3279 Ogee Batten BDL3/8˝ x 1-1/2˝ Maple 207/16˝ x 1-1/2˝ Red Oak 307/16˝ x 1-9/16˝ FJ Primed 25

3422 BDL5/16˝ x 1-3/16˝ Maple 203/8˝ x 1-3/16˝ Hemlock 303/8˝ x 1-3/16˝ Red Oak 203/8˝ x 1-3/16˝ FJ Unfinished 303/8˝ x 1-1/4˝ Hemlock 303/8˝ x 1-1/4˝ FJ Primed 203/8˝ x 1-1/4˝ MDF Primed 20

936 BDL3/8˝ x 1-1/4˝ Knotty Pine 203/8˝ x 1-1/4˝ Maple 203/8˝ x 1-1/4˝ FJ Unfinished 303/8˝ x 1-3/16˝ Red Oak 203/8˝ x 1-3/16˝ FJ Primed 303/8˝ x 1-3/8˝ Hemlock 30

937 BDL3/8˝ x 1-1/16˝ Red Oak sets3/8˝ x 1-1/4˝ MDF Primed 20

3422 BDL3/8˝ x 1-3/16˝ Red Oak

Page 27: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Backband & Screen Moulds

Moulding Selection Guide

Backbands are most commonly used in combination with casings, andare used to elevate and enhance the look of the casing while adding adramatic impact.

A very versatile profile; Screen Mould fits a wide variety of needs anduses. Traditionally used to hold mesh screening into wood screens, it alsoworks well as edge trim on various shelving or wood trim for wall finishes.ALL SIZES NOMINAL

3274 BDL1/4˝ x 3/4˝ Hemlock 501/4˝ x 3/4˝ Red Oak 301/4˝ x 3/4˝ FJ Primed 505/16˝ x 3/4˝ Maple 30

3275 BDL5/16˝ x 3/4˝ Red Oak 305/16˝ x 3/4˝ Maple

3277 BDL3/8˝ x 3/4˝ Red Oak 303/8˝ x 3/4˝ Maple 303/8˝ x 3/4˝ FJ Primed 40

810 Backband (3/8˝ inset) BDL11/16˝ x 1-1/16˝ Ultralite 8

115 BDL3/4˝ x 1-1/2˝ MDF Primed

3322 BDL1-1/4˝ x 2˝ FJ Primed 61-1/4˝ x 2˝ FJ Unfinished 41-3/16˝ x 2-1/4˝ FJ Primed 61-1/4˝ x 2-1/4˝ FJ Unfinished 8

3516 08 BDL11/16˝ x 11/16˝ FJ Primed 25

3516 BDL3/4˝ x 3/4˝ Red Oak 20

3520 BDL11/16˝ x 11/16˝ Hemlock 25

3428 BDL1/2˝ x 3/4˝ FJ Primed 25

3429 BDL1/2˝ x 3/4˝ Hemlock 25

Brickmoulds & SquaresA Brickmould is used as exterior casing around doors. 2 inches is themost common size, however, 1-1/2 and 1-1/4 inch sizes are available.

Squares and Parting Beads are used in a wide range of applicationsincluding filling gaps and transitioning heights. This profile may also beused in a variety of craft projects.ALL SIZES NOMINAL

Page 28: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Handrails

Moulding Selection Guide

Handrails provide safety and support.ALL SIZES NOMINAL

3510 BDL1-1/2˝ x 1-1/2˝ Hemlock 61-1/2˝x1-1/2˝-14´&16´ Hemlock 61-1/2˝ x 1-1/2˝ Red Oak 6

3506 BDL1-9/16˝ x 2-7/8˝ Red Oak 11-9/16˝ x 2-7/8˝ Maple 1

3508 BDL1-1/8˝ x 2-1/16˝ Red Oak 61-1/8˝ x 2-1/16˝ Maple 6

3507 BDL1-13/16˝ x 2-3/16˝ Hemlock 6

509 BDL1-3/16˝ x 2-1/8˝ Ultralite

Window StoolAlso called window sill, a Window Stool is the surfaceinstalled below the sash of a window. Trim installedunder window stool creates a distinctive look andadds a decorative touch.ALL SIZES NOMINAL

Page 29: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Corners

Moulding Selection Guide

Corners are used to protect theoutside edges of the wall from damageand abrasion. Corners come in a widevariety of sizes and detailing.ALL SIZES NOMINAL

3212 BDL3/8˝ x 3/4˝ Red Oak 203/8˝ x 3/4˝ Maple 20

3216 BDL3/4˝ x 1-1/2˝ Red Oak 103/4˝ x 1-1/2˝ Maple 203/4˝ x 1-1/2˝ MDF Primed 10

3202 BDL1/2˝ x 1/2˝ Hemlock 251/2˝ x 1/2˝ Red Oak 201/2˝ x 1/2˝ Maple 201/2˝ x 1/2˝ FJ Primed 40

3206 BDL11/16˝ x 11/16˝ Knotty Pine 2011/16˝ x 11/16˝ Hemlock 2511/16˝ x 11/16˝ Red Oak 2011/16˝ x 11/16˝ Maple 2011/16˝ x 11/16˝ FJ Primed 40

3282 BDL11/16˝ x 11/16˝ Hemlock 2511/16˝ x 11/16˝ FJ Primed 253/4˝ x 3/4˝ Red Oak 20

3283 BDL11/16˝ x 11/16˝ Maple 203/4˝ x 3/4˝ Red Oak 20

3280 BDL1-1/16˝ x 1-1/16˝ Hemlock 101-1/16˝ x 1-1/16˝ Red Oak 201-1/16˝ x 1-1/16˝ Maple 201-1/8˝ x 1-1/8˝ FJ Primed 20

202 BDL1-1/16˝ x 1-1/16˝ Knotty Pine 201-1/16˝ x 1-1/16˝ Red Oak 201-1/16˝ x 1-1/16˝ FJ Primed 201-1/8˝ x 1-1/8˝ Maple 20

3220 BDL1/2˝ Hemlock 25

3222 BDL11/16˝ Hemlock 25

3224 BDL1-1/16˝ Hemlock 10

3226 BDL1-5/16˝ Hemlock 10

3228 BDL1-1/2˝ Hemlock 10

Full, Half & Quarter RoundsFull Rounds are used fornumerous purposes andprojects. Some of the morecommon uses are closet poles,curtain rods and towel rods.

A cross section of a Half Roundlooks like a half circle and isused primarily as decorativetrim. It works well as a trimpiece for wall paper or to add adecorative pattern to flatpanels. This profile can also beused to put a rounded edge onvarious shelving.

Quarter Rounds come in severalsizes and serve a variety offunctions. They are most oftenused with baseboards.ALL SIZES NOMINAL

Base CornersRainbow CornersRosettes Plinth Blocks Universal Corners

Accessories

Page 30: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

Finish Lumber (S4S)

Moulding Selection Guide

ALL SIZES NOMINAL

1x2

1x3

1x4

1x5

1x6

1x7

1x8

1x10

1x12

2x2

2x4

2x6

2x8

1/2x2

1/2x4

1/2x6

1/2x8

MIXED GRAIN FIR X X X X X X X X X X X

UNFINISHED FJ X X X X X X

KNOTTY PINE X X X X X

RED OAK X X X X X X X X X X X X X X X

PRIMED FJ X X X X X X X

PRIMED MDF X X X X X X X X

ULTRALITE X X X X X X

MAHOGANY X X X

MAPLE X X X X X X X X X

CHERRY X X X X

Embossed Pre-FinishedALL SIZES NOMINAL

Door JambsALL SIZES NOMINAL

Mouldings, Jambs and Boards

MarquisOak

AlbanyMaple

LegacyWalnut

VinylWhite

356 Col. Casing 7/16 x 2-1/4 X X X

3000 Bev. Casing 7/16 x 1-7/16 X X X

3002 Bev. Casing 7/16 x 2-1/4 X X

3140 Col. Base 7/16 x 3-1/4 X X

3244 Crown 3/4 x 1-1/4 X X

3206 Qtr Round 11/16 x 11/16 X X

3264 Cove 11/16 x 11/16 X X

3280 OSC 1-1/16 x 1-1/16 X X

3274 Batten 5/16 x 3/4 X X

3422 Stop 3/8 x 1-1/4 X X X

1x2 Bifold Liner 11/16 x 1-1/2 X

4-9/16 Flat Jambs 11/16 x 4-9/16 X X X

6-9/16 Flat Jambs 11/16 x 6-9/16 X

IN-STOCK DOOR JAMBSKNOTTY PINE

INTERIORRED OAKINTERIOR

MAPLEINTERIOR

PRIMED FJINTERIOR

4-9/16 FLAT 1-1/2 FLAT 4-9/16 FLAT 4-9/16 FLAT

• 4-9/16 FLAT • 4-9/16 SGLRABBET

• 6-9/16 FLAT • 6-9/16 SGLRABBET

KNOTTY PINEEXTERIOR

RED OAKEXTERIOR

MAPLEEXTERIOR

PRIMED FJEXTERIOR

• • • 4-9/16 SGLRABBET KERF

• • • 6-9/16 SGLRABBET KERF

IN-STOCK DOOR JAMBSRAW FJ

INTERIORULTRALITEINTERIOR

PRIMED MDFINTERIOR

RAW MDFINTERIOR

4-9/16 FLAT 4-9/16 FLAT 4-9/16 FLAT 4-9/16 FLAT

• • 7-7/8 SGLRABBET •

• • • •

RAW FJEXTERIOR

ULTRALITEEXTERIOR

PRIMED MDFEXTERIOR

RAW MDFEXTERIOR

• • 7-7/8 SGLRABBET KERF •

• • • •

FLATJAMB

SGL RABBETKERFED

SINGLERABBET

Page 31: Moulding & Millwork - Mission Building Suppliesmissionbuildingsupplies.ca/media/IND3148PrairieProfileGuide.pdf · Moulding & Millwork The Builder’s preference for innovative ideas

What if...Thoughts became Expectations

What if...Expectations became Dreams

What if...Dreams became Reality

...and Made Your Dreams Come True!

What if...You put it all Together...

DISTRIBUTED BY:

PRIN

TED

IN C

AN

AD

A 0

2/06

MOULDING & MILLWORK INC. – CALGARY5367 – 50th Street S.E., Calgary, AB T2C 3W1Phone (403) 543-3260 (800) 972-8337Fax (403) 236-9178

MOULDING & MILLWORK INC. – EDMONTON18150 – 109 Ave N.W., Edmonton, AB T5S 2K2Phone (780) 454-9681 (800) 463-1240Fax (780) 452-8869

MOULDING & MILLWORK INC. – SASKATOON814 – 48th Street, Saskatoon, SK S7K 3Y4Phone (306) 931-3066 (800) 667-3970Fax (306) 931-2397

MOULDING & MILLWORK INC. – REGINA205 Leonard Street, Regina, SK S4N 5X5Phone (306) 721-4488 (800) 552-8229Fax (306) 721-5717

MOULDING & MILLWORK INC. – WINNIPEG989 C. Keewatin Street, Winnipeg, MB R2X 2X4Phone (204) 632-7544 (800) 538-6742Fax (204) 632-7543

www.mouldingandmillwork.com