Exterior Millwork

2012

www.panelplus.co

EXTERIOR MILLWORK

Exterior Millw

ork

BalustradeSystem

DecorativeBrackets

ExteriorPolystyrene &PVC Mouldings

Louvers &Gable Vents

Exterior Polyurethane Mouldings

Dentil Blocks

Window & Door Trim

Corbels

pgs. 862-869

pg. 823

pgs. 820, 828

pg. 823

• Door Crossheads - pgs. 824-825, 829• Entrance Trim / Pilaster - pgs. 825-826, 830• Pediments - pg. 825• Window Crossheads - pgs. 824

pg. 822

pgs. 831-833

pg. 821

Tpgs. 818-833

Transform any ordinary porch, patio balcony or stairway into an impressive sophisticated space. Our weather resistant polyurethane balusters are reinforced with PVC piping & are available in a variety of sizes to fit the scale of your space. Complete you balustrade system with top & bottom rails, newel posts, caps & fastener kits.

Our decorative brackets embellish a homes exterior with victorian and colonial style. These detailed & architecturally accurate brackets add charm & character.

Similar to decorative brackets, our richly detailed corbels have a bolder appearance as they’re intended to look as though bearing weight.

U.V. stabilized moisture & insect proof, weather proof & more insulated than wood, our exterior plastic mouldings are made from recycled materials. Available in crowns, caps, chair rails, casings & more.

Round, octagon, cathedral & triangle louvers are offered as functional with open slats & a screened backing for air flow or decorative with closed slats for use as an accent. High density polyurethane will never rot or decay.

Dental blocks serve as a small corbel, creating the look of a large dentil moulding. Available in straight & pitched in several sizes & profiles.

Dentil mouldings, casings, cornices, crowns, fascia, coves & more are offered in rot proof, weather proof, insect proof & easy to work with high density polyurethane.

Create distinction & bring focus to doors & windows by adding crossheads, pediments & pilas-ters. Completely change & en-hance the exterior of any home or business with these weather proof & easy to install winow & door trims. A multitude of sizes available to work for almost any application.

T-818

T-819

Exterior Millwork by Fypon

T-820

Airflow

DECORATIVE ROUND LOUVER

FEATURES AND

BENEFITS

• 45-degree angled slats on functional louvers protect interiors from precipitation.• Primed with ultraviolet stable coating.• A variety of shapes and sizes complement most architectural styles.• Unlike wood, Fypon louvers resist insect infestation and will not rot, warp, decay or split.• Easy installation. FUNCTIONAL LOUVERS

Accent exterior sidewall applications, but also have open slats that allow forair ventilating. Includes a screenbacking to keep insects out.

NOTE: If you are ordering a Functional Louver, your rough opening should be approximately 2” smaller around the entire perimeter of the louver. All louvers can be ordered with siding rout for a neat professional finish. Please specify upon

ordering. Part# ROUTED (Rout is a flat 5/8” x 5/8” groove)

Shown: rlv24tk

DECORATIVE LOUVERS

DECORATIVE OCTAGON LOUVER

Exterior Louvers/Gable VentsRound, Octogon, Cathedral & Triangle Louvers

Exterior Millwork High Density Polyurethane

Have closed non-ventilating slats that do not allow air to pass through. They are used for decorative purposes only to accent exterior sidewall applications

All louvers can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED (Rout is a flat 5/8” x 5/8” groove)

DECORATIVE CATHEDRAL

LOUVER CATHEDRAL LOUVER

trIMWORKS WITH FCLV22X31 &

CLV22X31

TRIANGLE LOUVER

Pitch indicates that incline of a roof as a ratio of the vertical rise to the horizontal run. It is properly expressed as X distance in 12 inches. For example: A roof that rises at a rate of seven inches for each foot of run is designated as having a 7/12 pitch.

Pitch Information

QUANTITY DISCOUNTS AvAIlABlE.

INQUIrE FOr A QUOtE.

NOTE: If you are ordering a Functional Louver, your rough opening should be approximately 2” smaller around the entire perimeter of the louver.

DIA.DECORATIVE

PArt #FUNCTIONAL

PArt #16” RLV16 --18” RLV18 FRLV1822” RLV22 FRLV2224” rlv24 Frlv2428” RLV28 FRLV2830” RLV30 FRLV3036” RLV36 FRLV36

ADECORATIVE

PArt #FUNCTIONAL

PArt #18” OLV18 --22” OLV22 FOLV22

A BDECORATIVE

PArt #FUNCTIONAL

PArt #12” 24” Clv12X24 --16” 36” CLV16X36 --18” 30” CLV18X30 FCLV18X3022” 31-1/2” CLV22X31 FCLV22X3124” 48” Clv24X48 --28” 43” Clv28X43 FClv28X43

A B trIM WIDtH PArt #22-3/16” 31-11/16” 3-1/2” Clv22X31X4F

Pl Premium AdhesivePArt# SIZEADH1 10.6oz Cartridge

A B PItCHDECORATIVE

PArt #FUNCTIONAL

PArt #48” 12” 6/12 trlv48X12 --48” 24” 12/12 trlv48X24 Ftrlv48X2460” 17-1/2” 7/12 TRLV60X18 FTRLV60X1860” 22-1/2” 9/12 TRLV60X23 FTRLV60X2364” 26-1/2” 10/12 trlv64X27 Ftrlv64X2765” 21” 7-3/4/12 trlv65X21 Ftrlv65X2166” 22” 8/12 TRLV66X22 FTRLV66X2276” 19” 6/12 trlv76X19 --84” 17-1/2” 5/12 trlv84X18 Ftrlv84X18

EXTERIOR MILLWORK

T-821

CORNICE MOULDINGA

BC

DOOR/WINDOW MOULDINGS

AB

C

MouldingsExterior Millwork High Density Polyurethane

CLASSIC DENTIL MOULDINGA

C

B

COVE MOULDING

DENTIL FASCIA MOULDING A

C

B

C

B

A

DENTIL MOULDING

CROWN DENTIL MOULDINGSA

C

B

A

B

C

CROWN MOULDINGS

CHAIR RAIL MOULDINGSA

C

B

A

B

IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH1.

QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

PART # LENGTH A B CMLD240-8 8’ 3-1/4” 4” 11/16”

PART # LENGTH A B CMLD220-12 12’ 1-3/4” 5-1/2” 3/4”

PART # A B CTOOTH/SPACE LENGTH

MLD310-12 1-1/4” 4-1/2” 7/16” 1-1/2” 12’MLD310-16 1-1/4” 4-1/2” 7/16” 1-1/2” 16’

Works with DTLB 6x4x6, see page 857.


MLD330-12 1-5/8” 7” 7/8” 2” 12’

PART # A BTOOTH/SPACE LENGTH

MLD354-12 1” 3-1/16” 1-5/8” 12’-2-1/4”


MLD411-16 4-1/2” 7” 1/2” 1-1/2” 16’

PART # A B C LENGTHMLD583-16 8” 8” 1/2” 16’

PART # A B C LENGTHMLD452-8 2” 3” 1/4” 8’MLD452-12 2” 3” 1/4” 12’

PART # A B C LENGTHMLD610-8 1-1/2” 2-3/8” 1/2” 8’

EXTERIOR MILLWORK

T-822

• Detailed millwork is architecturally accurate.• Paintable products are double primed with

exterior grade ultraviolet stable coating.• Resist insect infestation, will not rot, warp decay or split.• Easy installation.

DECORATIVE BRACKETS

A

BC

BKT6X8

A

B

C

BKT7X16

A

B

C

BKT8X8

A

B

C

BKT10X12

A

B

C

BKT7X10

Shown here:GP64X32(Gable Pediment)

K4TF(Dentil Block)BKT14X16(Bracket)

A

B

CBKT12X12WW

USING CORROSION-RESISTANT FASTENERS AND PL PREMIUM ADHESIVEAlways use corrosion-resistant mechanical fasteners (nails or screws) and PL Premium Adhesive when installing Fypon Products. This combination provides a secure, long lasting bond. Countersink all fasteners about 1/8” and fill with exterior grade white spackle. If desired, sand any minor imperfections and topcoat with a quality exterior latex or oil base paint. Fypon exterior millwork installations should be finished using a quality, exterior grade silicone caulk to prevent water infiltration behind siding, windows and doors. Some exterior millwork installations, in particular new construction (before siding is applied) may require a J-channel and/or flashing to prevent water infiltration. Installers must determine which installation technique is best for the specific situation.IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH1.

Decorative Millwork/Decorative Brackets


A

B

C

BKT14X14

A

B

C

BKT14X15

A

B

C

BKT19X20

QUANTITY DISCOUNTS AVAILABLEINQUIRE FOR A QUOTE.

PART # A B CBKT6X8 6” 8” 1-1/2”BKT7X10 7-5/8” 10-5/8” 3”BKT7X16 7-7/16” 16-1/4” 5-1/2”BKT8X8 8” 8” 2”

BKT10X12 10-1/8” 12-1/2” 1”BKT12X12WW 11-13/16” 11-13/16” 1”

BKT14X14 13-1/2” 13-1/2” 3-1/2”BKT14X15 14” 14-5/8” 1”BKT19X20 19-1/2” 19-9/16” 1-1/8”

EXTERIOR MILLWORK

T-823

A

B

C

DTLB8X6X6

A

B

C

DTLB9X11X16

A

B

C

DTLB6X4X6

C

DTLB6X6X8

A

B

DENTIL BLOCKS

A

B

C

DTLB4X4X7

Decorative Millwork/Corbels/Dentil Blocks


CORBELS

A

B

C

COR5X10

A

B

C

COR10X14

A

B

C

COR11X20

Shown here:COR5X10(Corbel)

USING CORROSION-RESISTANT FASTENERS AND PL PREMIUM ADHESIVEAlways use corrosion-resistant mechanical fasteners (nails or screws) and PL Premium Adhesive when installing Fypon Products. This combination provides a secure, long lasting bond. Countersink all fasteners about 1/8” and fill with exterior grade white spackle. If desired, sand any minorimperfections and topcoat with a quality exterior latex or oil base paint. Fypon exterior millworkinstallations should be finished using a quality, exterior grade silicone caulk to prevent water infiltration behind siding, windows and doors. Some exterior millwork installations, in particular new construction (before siding is applied) may require a J-channel and/or flashing to prevent water infiltration. Installers must determine which installation technique is best for the specific situation.IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH1.

PART # A B CCOR5X10 5-1/4” 10” 4”

COR10X14 9/16” 14-1/2” 3-3/4”COR11X20 11” 20” 6-1/2”

PART # A B CDTLB6X4X6 5-1/2” 6-1/8” 4-3/4”DTLB6X6X8 8” 5-3/8” 5-1/2”DTLB8X6X6 5-1/4” 8-1/8” 5-1/2”

DTLB9X11X16 16” 9-1/4” 11-1/4”DTLB4X4X7 7-1/2” 4-5/16” 5”

EXTERIOR MILLWORK

T-824

K9MKeystone

For 9” Crossheads

KP9MRecessed

PanelKeystone

For 9” Crossheads

KP6MRecessed

Panel Keystone

For 6” Crossheads

6” WINDOW CROSSHEADS

K6MKeystone

For 6” Crossheads

Shown here:AR60X10MC

(Arch)SWDH60X30

(Sunburst)K10TM

(Keystone)PIL10X96A

(Pilaster)

FEATURES AND BENEFITS

Note - All modified crossheads are nonreturnable.

• Custom sizes available.• Primed with ultraviolet stable coating.• Unlike wood, Fypon window and door trim products resist insect infestation and will not warp, decay or split.• Easy Installation.

All crossheads are available routed and with the following factory applied accessories:

With Accessories

Dentil Trim (D)Trim Strip (T)

Bottom Trim (BT)Adds 1” to height

Without Accessories

A

B 3”

1”

6”

D A

CF

EB

D A

CF

EB

KEYSTONES

A Keystone cannot be used when combining a

Crosshead with a Pediment.

A

B4-1/2”

1-3/8”

9”

9” WINDOW CROSSHEADS

KEYSTONESD A

CF

EB

D A

CF

EB

Shown here:WCH64X9

(Crosshead)PIL7X108(Pilaster)

Window and Door Trim Exterior Millwork High Density Polyurethane

12” WINDOW CROSSHEAD

All pediments can be ordered with siding rout for aneat professional finish. Please specify upon ordering. Part# ROUTED. (Rout is a flat 5/8” x 5/8” groove)

QUANTITY DISCOUNTS AVAILABLE.INQUIRE FOR A QUOTE.

A

B

4-1/2”

1-3/8”

12”

DESCRIPTION PART # FOR SIZESDecorative

Dentil Moulding

DENTIL-MLDG-2457 24”- 57”DENTIL-MLDG-5893 58”- 93”

DENTIL-MLDG-94189 94”- 189”DENTIL-MLDG-190207 190”- 207”

Decorative Trim Strip

TRIMSTRIP-2490 24”- 90”TRIMSTRIP-91186 91”- 186”

TRIMSTRIP-187207 187”- 207”Bottom Trim

Adds 1’ to HeightBOTTOMTRIM-24141 24”- 141”

BOTTOMTRIM-142207 142”- 207”

PART # DESCRIPTIONROUTED 5/8” x 5/8” groove

PART # A BWCH24X6 24” 27-1/2”WCH30X6 30” 33-1/2”WCH32X6 32” 35-1/2”WCH33X6 33-5/8” 37-1/8”WCH34X6 34” 37-1/2”WCH36X6 36” 39-1/2”WCH37X6 37-5/8” 41-1/8”WCH38X6 38” 41-1/2”WCH40X6 40” 43-1/2”WCH41X6 41-5/8” 45-1/8”WCH43X6 43” 46-1/2”WCH44X6 44” 47-1/2”WCH48X6 48” 51-1/2”WCH56X6 56” 59-1/2”

PART # A BWCH60X6 60” 63-1/2”WCH64X6 64” 67-1/2”WCH68X6 68” 71-1/2”WCH72X6 72” 75-1/2”WCH74X6 74” 77-1/2”WCH76X6 76” 79-1/2”WCH80X6 80” 83-1/2”WCH87X6 87” 90-1/2”WCH96X6 96” 99-1/2”WCH100X6 100” 103-1/2”WCH104X6 104” 107-1/2”WCH108X6 108” 111-1/2”WCH110X6 110” 113-1/2”

PART # A BWCH24X9 24” 29-1/2”WCH32X9 32” 37-1/2”WCH33X9 33-5/8” 39-1/8”WCH34X9 34” 39-1/2”WCH36X9 36” 41-1/2”WCH37X9 37-5/8” 43-1/8”WCH38X9 38” 43-1/2”WCH40X9 40” 45-1/2”WCH41X9 41-5/8” 47-1/8”WCH43X9 43” 48-1/2”WCH44X9 44” 49-1/2”WCH48X9 48” 53-1/2”WCH60X9 60” 65-1/2”WCH64X9 64” 69-1/2”WCH68X9 68” 73-1/2”

PART # A BWCH72X9 72” 77-1/2”WCH73X9 73” 78-1/2”WCH74X9 74” 79-1/2”WCH76X9 76” 81-1/2”WCH80X9 80” 85-1/2”WCH84X9 84” 89-1/2”WCH85X9 85” 90-1/2”WCH96X9 96” 101-1/2”WCH99X9 99” 104-1/2”WCH100X9 100” 105-1/2”WCH101X9 101” 106-1/2”WCH103X9 103” 108-1/2”WCH104X9 104” 109-1/2”WCH108X9 108” 113-1/2”WCH110X9 110” 115-1/2”WCH113X9 113” 118-1/2”WCH197X9 197” 202-1/2”

Matches all 9” Crossheads PART # A B C D E F

K9M 8” 11” 6” 5-3/4” 9” 1-1/8”KP9M 8” 11” 6” 6-1/4” 6” 1-5/8”

PART # A BWCH96X12 96” 101-1/2”

Matches all 6” CrossheadsPART # A B C D E F

K6M 5-3/4” 7” 4” 3-7/8” 6” 1-1/2”KP6M 5-3/4” 7” 4” 4-1/8” 6” 1-3/4”

EXTERIOR MILLWORK

T-825

6” DOOR CROSSHEAD 9” DOOR CROSSHEAD

Entrance Trim/CrossheadsExterior Millwork High Density Polyurethane

ACORN COMBINATION

PEDIMENT

Window &Entrance Trim

K6M & K9MKeystones

For 6”, 9” & 12” Crossheads

KP6M &KP9MRecessed

PanelKeystone

For 9” Crossheads

KEYSTONESD A

CF

EB

D A

CF

EB

SuNBuRST WINDOWPEDIMENT HAlF ROuND

1-3/4”H

W

DC

BA

PITCH

COMBINATION PEAKED CAP PEDIMENT

Pitch InformationPitch indicates the incline of a roof as a ratio of the vertical rise to the horizontal run. It is properly expressed as X distance in 12 inches.For example: A roof that rises at a rate of seven inches for each foot of run is designated as having a 7/12 pitch.

PITCH

A

C

B

All pediments can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROuTED. (Rout is a flat 5/8” x 5/8” groove)

QuANTITY DISCOuNTS AVAIlABlE. INQuIRE FOR A QuOTE.

uSING CORROSION-RESISTANT FASTENERS AND Pl PREMIuM ADHESIVEAlways use corrosion-resistant mechanical fasteners (nails or screws) and PL Premium Adhesive when installing Fypon Products. This combination provides a secure, longlasting bond. Countersink all fasteners about 1/8” and fill with exterior grade white spackle. If desired, sand any minor imperfections and topcoat with a quality exterior latex or oil base paint. Fypon exterior millwork installations should be finished using a quality, exterior grade silicone caulk to prevent water infiltration behind siding, windows and doors. Some exterior millwork installations, in particular new construction (before siding is applied) may require a J-channel and/or flashing to prevent water infiltration. Installers must determine which installation technique is best for the specific situation.IMPORTANT: A urethane base adhesive such as PL Premium Adhesive must be used on all joints. See page 820 to order PL premium Adhesive, ADH-1.

A

9”

B

4-1/2”

1-3/8”A

6”

B

3”

1”

PART # A BWCH86X6 86” 89-1/2”

PART # A BWCH54X9 54” 59-1/2”WCH56X9 56” 61-1/2”WCH67X9 67” 72-1/2”WCH81X9 81” 86-1/2”WCH86X9 86” 91-1/2”WCH90X9 90” 95-1/2”WCH93X9 93” 98-1/2”

Matches all 6”, 9” & 12” Crossheads PART # A B C D E F

K6M 5-3/4” 7” 4” 3-7/8” 6” 1-1/2”K9M 8” 11” 6” 5-3/4” 9” 1-1/8”

Matches all 9” CrossheadsPART # A B C D E FKP6M 5-3/4” 7” 4” 4-1/8” 6” 1-3/4”KP9M 8” 11” 6” 6-1/4” 9” 1-5/8”

PART # W HSWDH24X12 24” 12”SWDH30X15 30” 15”SWDH32X16 32” 16”SWDH33X17 33-5/8” 16-3/4”SWDH36X18 36” 18”SWDH37X19 37-5/8” 18-13/16”SWDH40X20 40” 20”SWDH42X21 42” 21”SWDH44X22 44” 22”SWDH48X24 48” 24”SWDH56X28 56” 28”SWDH60X30 60” 30”SWDH64X32 64” 32”SWDH68X34 68” 34”SWDH72X36 72” 36”SWDH76X38 76” 38”

PART # A B C D PROJ PITCHACORN MATCH

CAP50 50” 54-1/2” 17-1/4” 21-1/8” 3-1/8” 6/12 A5X10CAP54 54” 58-1/2” 18-3/8” 21-3/8” 3-1/8” 6/12 A5X10CAP75 75” 79-1/2” 22-1/16” 25-1/8” 3” 6/12 A5X10CAP80 80” 84-7/16” 20-3/4” 25-3/8” 3-1/8” 5-1/2/12 A5X12CAP85 85” 89-3/8” 21-13/16” 28” 3-1/8” 5/12 A5X12

PART # A B C PROJ PITCHCPCP54 54” 58-5/16” 21” 3” 6/12

EXTERIOR MILLWORK

T-826

H

W

PROJ

PB

WITH ADJUSTABLE PLINTHBLOCKFLUTED PILASTERS

ONE PIECE W/ATTACHED PLINTH BLOCKONE PIECE W/ATTACHED PLINTH BLOCK

H

W

PROJ

PB

H

W

PROJ

PB

H

W

PROJ

PB

WITH ADJUSTABLE PLINTH BLOCK

H

W

PROJ

PB

FLUTED PILASTER ECONOMYONE PIECE W/ATTACHED PLINTH BLOCK

H

W

PROJ

PB

HALF ROUND COLUMN PILASTERONE PIECE W/ATTACHED PLINTH BLOCK

H

W

PROJ

PB

DOUBLE PANEL PILASTERONE PIECE W/ATTACHED PLINTH BLOCK

PLAIN PILASTERS

Shown here:K9M (Keystone) See pages 824-825DCH93X9 (Moulding) See page 825PIL7X108 (Pilaster) See page 826

Entrance Trim / Pilasters Exterior Millwork High Density PolyurethaneSold in sets only

All pediments can be ordered with siding rout for a neat professional finish. Please specify upon ordering. Part# ROUTED. (Rout is a flat 5/8” x 5/8” groove)

QUANTITY DISCOUNTS AVAILABLE. INQUIRE FOR A QUOTE.

PART # W H PROJPLINTH

BLOCK HTPIL6X120P 6” 120” 2-1/2” 13-13/16”PIL7X108P 7” 108” 2-1/2” 13”PIL7X120P 7” 120” 2-1/2” 13”PIL8X108P 8” 108” 2-5/8” 13”PIL9X108P 9” 108” 3” 14-1/2”

USE FOR WINDOW APPLICATION


BLOCK HTPIL5X90 5-1/4” 90” 1-5/8” 10-1/8”PIL6X90 6-1/4” 90” 2-1/2” 13-1/8”PIL7X90 7” 90” 2-1/2” 13-3/16”PIL9X90 9” 90” 3” 14-1/2”


BLOCK HTPIL5X90P 5-1/4” 90” 1-1/16” 10-1/16”PIL7X90P 7” 90” 2-1/2” 13-3/16”PIL8X90P 8” 90” 2-1/2” 13-3/16”PIL11X90P 11” 90” 3-1/2” 13-3/16”PIL11X108P 11” 108” 3-1/2” 14-1/2”


BLOCK HTPIL3X108 3-1/2” 108” 1-5/8” 10”PIL4X108 4-1/2” 108” 1-5/8” 10”PIL5X108 5-1/4” 108” 1-5/8” 10”PIL6X108 6-1/4” 108” 2-1/2” 13-3/16”PIL7X108 7” 108” 2-1/2” 13”PIL7X144 7” 144” 2-1/2” 13”PIL8X90 8” 90” 2-1/2” 13”

PIL8X108 8” 108” 2-1/2” 13”PIL9X108 9” 108” 3” 14-1/2”PIL11X108 11” 108” 3-1/2” 14-1/2”PIL11X144 11” 144” 3-1/2” 14-1/2”


BLOCK HTPIL5X90E 5-1/4” 90” 1-1/4” 14-3/16”PIL7X90E 7” 90” 1-5/16” 14-3/16”

PART # W H PROJPIL10X96HC 10” 96” 6”


BLOCK HTPIL7X90DP 7” 90” 2-1/2” 13-3/16”PIL9X90DP 9” 90” 3” 14-1/2”

EXTERIOR MILLWORK

T-827

Exterior Millwork by Focal Point

T-828

Meridian

Oneida

BadenFrombell

NEW!

Montour

PART # widTh heighT PRoj.oCL2222 22” 22” 2”oCL2828 28” 28” 1-7/8”oCL3030 29-7/8” 29-7/8” 1-7/8”

PART # widTh heighT PRoj.RL20FT 20” 20” 2”RL27FT 27” 27” 2”RL34FT 34” 34” 1-7/8”

PART #Key To Key diAmeTeR

ouTeR Ring diAmeTeR PRoj.

RL24FTK 24-1/8” 20-13/16” 1-13/16”RL38FTK 38” 36” 2-11/16”

PART # widTh heighT PRoj.RL15 15” 15” 2”RL18 18” 18” 2”RL22 22” 22” 2”RL24 24” 24” 2”RL28 27-3/4” 27-3/4” 2”RL30 29-1/2” 29-1/2” 2-1/2”RL32 32” 32” 2”RL36 36” 36” 2”RL48 48” 18” 1-7/8”

PART #Key To Key diAmeTeR

ouTeR Ring diAmeTeR PRoj.

RL18TK 17-5/8” 15-5/8” 3”RL24TK 26-1/2” 24” 3-3/4”RL28TK 28-5/8” 26” 3”RL30TK 30” 27-1/8” 3”RL32TK 31-3/4” 29-3/4” 3-3/4”RL36TK 36” 33” 3-1/2”RL40TK 40” 38” 3”

exterior Millwork - louvers

T-829

Northmoreland 3 -piece Garage Door Kit

Top Width: 6-1/6”Bottom Width: 4-1/16”Height: 7-1/4”Top Projection: 4”Bottom Projection: 1-5/8”

For the Hampton Crosshead

Top Width: 10-3/4”Bottom Width: 7”Height: 8-3/4”Top Projection: 1-1/4”Bottom Projection: 1-1/4”

For the Georgetown Crosshead

Top Width: 6-3/4”Bottom Width: 4”Height: 10-3/8”Top Projection: 4-7/16”Bottom Projection: 7/8”

For the Georgetown Crosshead

NEW!

Hampton

PART #

mAximum BReAsTBoARd

WidTh

mAximum oveRAll

WidThNWh609-lR-KiT 120” 124-1/2”NWh969-lR-KiT 192” 196-1/2”NWh1049-lR-KiT 208” 212-1/2”

height: 6”Projection: 2-3/4”

Georgetown 9”

height: 9”Projection: 3”

height: 9”Projection: 4”

Use KY736 keystoneUse KY829 or KY830 keystone

PART #BReAsTBoARd

WidThoveRAll

WidThhWh246 24-1/4” 26-3/4”hWh256 25-1/2” 28”hWh286 28” 30-1/2”hWh326 31-3/4” 34-1/4”hWh336 33-5/8” 36-1/8”hWh366 36” 38-1/2”hWh376 37-5/8” 40-1/4”hWh406 40” 42-1/2”hWh416 41” 43-1/2”hWh426 42-1/8” 44-5/8”hWh446 44” 46-1/2”hWh456 45” 47-1/2”hWh466 46-1/8” 48-5/8”hWh516 50-7/8” 53-3/8”hWh536 53” 55-1/2”hWh566 55-3/4” 58-1/4”hWh606 59-3/8” 61-3/4”hWh646 64” 66-1/2”hWh686 68” 70-1/2”hWh726 72” 74-1/2”hWh746 74” 76-1/2”hWh766 76” 78-1/2”hWh786 78” 80-1/2”hWh806 80” 82-1/2”hWh826 82” 84-1/2”hWh886 88” 90-1/2”hWh916 91” 93-1/2”hWh926 92” 95-1/2”hWh1006 99-3/4” 102-1/4”hWh1046 104” 106-1/2”hWh1086 108” 110-1/2”

PART # A

WidThB

WidThWhGT289 28” 32”WhGT349 34” 36”

WhGT37.639 38-5/8” 41-5/8”WhGT41.639 41-5/8” 45-5/8”

WhGT449 44” 48”WhGT459 45” 49”WhGT489 48” 52”WhGT549 54” 58”WhGT729 72” 76”WhGT049 104” 108”WhGT1089 108” 112”WhGT1929 192” 196”

KY736 KY829 KY830

KEYSTONES

ExTEriOr MillwOrK - CrOSShEadS

KEYSTONE

CAPITAL

PILASTER

CROSS HEAD

FRIEZE

Design your ideal door or window surround with our customizable components. All products are primed, moisture resistant polyurethane. A variety of rosettes enable you to showcase your style.

T-830

VENETIAN COPED/297911 (For Use w/Frieze)

SIENA97905

SIENA COPED/297906 (For Use w/Frieze)

HERITAgE97470

VENETIAN97910

ImPERIAL97570

mAjESTIC 97690

ImPERIAL 97590

B

A

HERITAgE 97480

ImPERIAL 97580

FLuTED 97405

FLuTED 97900

PILASTERS

PLINTHS

CAPITALS

FRIEZES

CROSS HEADS

CLASSIC KEYSTONE

PART # WORKS WITH WIDTH HEIgHT PROj.97910 97405, 97900 8-3/8” 7-1/4” 2-1/8”97905 97405, 97900 7-1/2” 7-1/4” 2-1/8”97470 97480 12-1/2” 6-11/16” 3”97570 97580 10-1/4” 3-1/8” 2-3/4”97911 97405, 97900 8-3/8” 7-1/4” 2-1/2”97906 97405, 97900 7-1/2” 7-1/4” 2-1/2”

PART # HEIgHT PROj. LENgTH97915 6” 2-7/8” 60”

PART # HEIgHT PROj. REPEAT LENgTH97920 6” 2-7/8” 1-15/16” 60”

SIENAPART # HEIgHT PROj. LENgTH15215 7-1/2” 1-3/4” 92-1/4”

gEORgIANPART # HEIgHT PROj. REPEAT LENgTH15205 7-1/2 1-3/4” 7-1/8” 92-1/4”

PART # WIDTH HEIgHT97925 6-3/4” 6-3/4”

PART # WIDTHWORKS

WITH HEIgHT PROj.97690 11-15/16” 97480 25-3/16” 2-3/4”97590 7-11/16” 97580 14” 1-3/16”97480 7-3/4” 97690 86-5/8” 3/4”97580 6-1/2” 97590 78-3/4” 11/16”97900 6” -- 90” 1-1/4”

97405 (A) 6” (B) 5-1/4” -- 89-3/4” 1-5/16”

COLONIAL

SIENA

The front door and entryway are the first areas people see; make these features a plus for your home. First impressions will be lasting with a door surround system by Focal Point. Choose from our licensed historical collections or mix and match elements to design your own entrance. Focal Point products are made of durable polyurethane, which resists mold, mildew and rot. Our door systems add architectural detail and enhance curb appeal.

MIX AND MATCH DOOR SYSTEMS

• Termite&Moistureproof(willnotpromotemildewormold).• Nosplitting,cracking,splinteringorrotting.• Readytoinstallwithstainlesssteelnails,screwsandconstructionadhesive.• Installedusingtraditionaltoolsandfasteners.• Finishedinwhite.Canbepaintedwithoilorlatexpaint.• Betterinsulationcharacteristicsthanwood.Energyefficient.

U.V. STABILIZED • WHITE FINISH PVC OR POLYSTYRENE • VARIOUS LENGTHS EASY

SHIPPING

Made in the U.S.A.

WELBUILTWELBUILTU.S.U.S.

CAN BE CUT FOR

* US Welbuilt is proudly manufactured from recycled high density polystyrene

T-831

Crown Mouldings

Ram's Solid Crown Moulding

U.S. Welbuilt

B

A

B

A

B

A

CROWN MOULDING

#1

CROWN MOULDING

#2

B

A

CROWN MOULDING

#3

Bed MouldingBA

B

A

Base Cap Moulding

XtraBond®9500The “Original” Hybrid Formula

XtraBond®9500isahighperformance,onecomponent,permanentlyflexible,easytouse,multi-purposefastcuremodifiedpolyurethanesealant.XtraBond®9500curesrapidlywhenexposedtoatmosphericmoisturetoformadurablebond.• Use as adhesive or filler.• Eco-friendly, low VOC’s.• Fast cure.

• Paintable.• Non-yellowing.

CROWN MOULDING #2MANUFACTURER PART # MATERIAL

DIMENSIONS MINIMUMORDER

LEADTIMEA B LENGTH

AMERICAN PRO PVM-47 PVC 4-5/8" 11/16" 16Ft. None Stock

MANUFACTURER PART # MATERIALDIMENSIONS MINIMUM

ORDERLEADTIMEA B LENGTH

U.S. WELBUILT EXTERIOR-284 Polystyrene 2-1/4" 1-1/8" 12Ft. None Stock*



LEADTIMEA B LENGTH

AMERICAN PRO PVM-49 PVC 3-5/8" 9/16" 16Ft. None StockU.S. WELBUILT EXTERIOR-49 Polystyrene 3-1/2" 5/8" 12Ft. None Stock*



LEADTIMEA B LENGTH







AMERICAN PRO PVM-75 PVC 1-3/4" 9/16" 16Ft. None StockU.S WELBUILT EXTERIOR-74 Polystyrene 1-3/4" 9/16" 12Ft. None Stock*

PART #XB-9500

EXTERIOR PLASTIC MOULDINGS

U.V. STABILIZED • WHITE FINISH PVC OR POLYSTYRENE • VARIOUS LENGTHS EASY

SHIPPING

Made in the U.S.A.


CAN BE CUT FOR


T-832

Quarter Round Moulding

Scotia Moulding

Brick Moulding

B

A

B

A

B

A

A

B

Drip Cap Moulding

Window Casing Moulding

Casing Moulding

Rake Moulding

B

A

B

A

B

A


XtraBond®9500isahighperformance,onecomponent,permanentlyflexible,easytouse,multi-purposefastcuremodifiedpolyurethanesealant.XtraBond®9500curesrapidlywhenexposedtoatmosphericmoisturetoformadurablebond.• Use as adhesive or filler.• Eco-friendly, low VOC’s.• Fast cure.

• Paintable.• Non-yellowing.



AMERICAN PRO PVM-106 PVC 3/4" 3/4" 16Ft. None StockU.S. WELBUILT EXTERIOR-105 Polystyrene 3/4" 3/4" 12Ft. None Stock*



AMERICAN PRO PVM-2021 PVC 3/4" 3/4" 16Ft. None StockU.S. WELBUILT EXTERIOR-93 Polystyrene 3/4" 3/4" 12Ft. None Stock*



AMERICAN PRO PVM-180C PVC 2" 1-1/4" 17Ft. None StockU.S. WELBUILT EXTERIOR-180-8 Polystyrene 2" 1-1/4" 8Ft. None StockU.S. WELBUILT EXTERIOR-180-12 Polystyrene 2" 1-1/4" 12Ft. None Stock* *






U.S. WELBUILT EXTERIOR-299 Polystyrene 3-5/8" 1-1/8" 8Ft. None Stock*



U.S. WELBUILT EXTERIOR-376 Polystyrene 2-1/4" 5/8" 8Ft. None Stock*



AMERICAN PRO N/A N/A N/A N/A N/A N/A N/AU.S. WELBUILT EXTERIOR-283 Polystyrene 1-3/4" 1-1/8" 12Ft. None Stock*

PART #XB-9500



U.V. STABILIZED • WHITE FINISH POLYSTYRENE • 8 FT or 12 FT. LENGTHS

Additional Exterior ProfilesMADE EXCLUSIVELY BY :NO MINIMUM ORDER

- IN STOCK

CAN BE CUT FOR


T-833

3/4”

2-7/8”

7/8”

3-1/2”

3/4”

4-5/8”

Crown Moulding Crown Moulding Crown Moulding

Crown Moulding Base Cap Moulding Base Cap Moulding

DecorativeBase Cap Moulding

Egg & Dart Pattern

Chair Rail Moulding

Half Round Moulding Half Round Moulding

Astragal Moulding Angle Moulding

7/8”

1-3/8”

5/8”

2”

1/2”

1-1/8”

1/2”

1-3/8”

1”

3-1/2”

3/4”3/8”

1”

1/2”

7/8”

3/8”

5/8”

5/8”

1-1/2”

1-1/2”

DecorativeBase Cap Moulding

Leaf Pattern

Raised Panel Cap MouldingFits 3/4" Board

1-9/16”

1-1/4”


XtraBond®9500isahighperformance,onecomponent,permanentlyflexible,easytouse,multi-purposefastcuremodifiedpolyurethanesealant.XtraBond®9500curesrapidlywhenexposedtoatmosphericmoisturetoformadurablebond.• Use as adhesive or filler.• Eco-friendly, low VOC’s.• Fast cure.• Paintable.• Non-yellowing.

EXTERIOR-581012Ft.Lengths














PART #XB-9500

NEW!


Exterior Millwork

Documents

Transcript of Exterior Millwork