MORE SPECIAL OFFERS IN OUR 24/7 WEB SHOPS - HS Walsh · more special offers in our 24/7 web shops...
4
SEPTEMBER 2016 MORE SPECIAL OFFERS IN OUR 24/7 WEB SHOPS www.hswalsh.com www.graysonclocks.com YOUR LINK TO A WORLD OF TOOLS, MATERIALS, CLOCKS & EQUIPMENT PLEASE NOTE ALL PRICES QUOTED ARE EXCLUSIVE OF VAT AND CARRIAGE AND ARE RELEVANT FOR THIS MONTH ONLY BIGGIN HILL 01959 543660 | HATTON GARDEN 020 7242 3711 | BIRMINGHAM Warstone Mews Birmingham B18 6JB 0121 236 9346 PLEASE NOTE ANY SPECIAL OFFERS ONLY APPLY TO PURCHASES MADE DURING SEPTEMBER 2016 YOUNG DESIGNER AWARDS We were delighted to be involved with Jacobs the Jewellers again this year to facilitate their Young Designer competition, along with Bishopsland Educational Trust and the Worshipful Company of Goldsmiths. Four young Bishopsland designers showcased one piece of silver and one piece of jewellery at the Jacobs store, competing for the best design in each category. Over 100 public votes were cast at the store throughout June. Susan Macleod was awarded with the winning jewellery design for her Wild Sweetpea Necklace and Elizabeth Hendricks won the silver design award for her tea light holder. Our congratulations go to everyone involved!! Left to right; Ian Jacobs, Susan MacLeod and Patrick Sheehan. OUR NEW OMS BINOCULAR MICROSCOPE. It has been specially manufactured for use with micro-setting jewellery. It features a fully adjustable stand to allign the microscope to allow comfortable use. Features include: • Stereo Zoom Magnificaton 7x - 45x. • Extended Total Magnification 3.5x 270x. • Zoom Objective Magnification 0.7x - 4.5x, • Working distance 118mm • High eye point, wide field eyepiece SWH 10x (Ø 23mm) • Binocular head inclined 45°, rotatable 360°, dioptre adjustable + or -6 • Head inter-pupillary distance of head adjustable from 52mm to 76mm Ref TM70 Was £1266.00 now £1012.00 While stock lasts OMS BINOCULAR MICROSCOPE ON STAND ORION M-PULSE 30 THE NEWEST MEMBER OF THE ORION PULSE ARC WELDER FAMILY. With a 30ws power potential, this small and friendly welder can be used by almost anyone and has the power to tackle all sorts of jobs. It’s perfect for those needing a welder for making quick, small welds on a light duty cycle. The mPulse power settings range from 5.0ws to 30ws, in 2.5ws increments - that’s 11 different power settings to choose from. The mPulse works amazingly well with Gold, Silver and many other metals used in jewellery creation and repair. It’s a superior alternative to any solder application; and, measuring in at 5.5” x 5.25” x 3.625”, the mPulse takes up almost no space on your bench. The machine runs on argon gas and we recommend that you purchase a bottle with a built-in regulator. Ref TW1M £1780.00 Scan to see this in action OMS LED RING LIGHT FOR USE WITH OMS MICROSCOPES SPECIFICATION: • Input Voltage (AC) 85v - 264v/50hz-60hz. • Output Voltage (DC) 12v. • Output current 140 + or - 10mA • Connection Dimension (Max) 60mm • LEDs x 60. • Working Distance 80 - 130mm • Brightness (Adjustable) 14000 Lux (at 100mm height) • Colour Temperature 6000K. Ref TM7013 £69.66
Transcript of MORE SPECIAL OFFERS IN OUR 24/7 WEB SHOPS - HS Walsh · more special offers in our 24/7 web shops...
SEPTEMBER 2016MORE SPECIAL OFFERSIN OUR 24/7 WEB SHOPS
www.hswalsh.comwww.graysonclocks.com
YOUR LINK TO A WORLD OF TOOLS, MATERIALS, CLOCKS & EQUIPMENT
PLEASE NOTE ALL PRICES QUOTED ARE EXCLUSIVE OF VAT AND CARRIAGE AND ARE RELEVANT FOR THIS MONTH ONLY
BIGGIN HILL 01959 543660 | HATTON GARDEN 020 7242 3711 | BIRMINGHAM Warstone Mews Birmingham B18 6JB 0121 236 9346
PLEASE NOTE ANY SPECIAL OFFERS ONLY APPLY TO PURCHASES MADE DURING SEPTEMBER 2016
YOUNG DESIGNER AWARDSWe were delighted to be involved with Jacobs theJewellers again this year to facilitate their YoungDesigner competition, along with BishopslandEducational Trust and the Worshipful Company ofGoldsmiths. Four young Bishopsland designersshowcased one piece of silver and one piece ofjewellery at the Jacobs store, competing for thebest design in each category. Over 100 public voteswere cast at the store throughout June. SusanMacleod was awarded with the winning jewellerydesign for her Wild Sweetpea Necklace andElizabeth Hendricks won the silver design awardfor her tea light holder. Our congratulations go toeveryone involved!!
Left to right; Ian Jacobs, Susan MacLeod and Patrick Sheehan.
OUR NEW OMS BINOCULAR MICROSCOPE. It has been speciallymanufactured for use with micro-setting jewellery. It features afully adjustable stand to allign themicroscope to allow comfortable use.Features include:• Stereo Zoom Magnificaton 7x - 45x. • Extended Total Magnification 3.5x 270x. • Zoom Objective Magnification 0.7x - 4.5x,• Working distance 118mm• High eye point, wide field eyepiece SWH 10x (Ø 23mm)• Binocular head inclined 45°, rotatable 360°, dioptre adjustable + or -6• Head inter-pupillary distance of head adjustable from 52mm to 76mm
Ref TM70 Was £1266.00 now £1012.00 While stock lasts
OMS BINOCULAR MICROSCOPE ON STANDORION M-PULSE 30THE NEWEST MEMBER OF THEORION PULSE ARC WELDER FAMILY.With a 30ws power potential, this small andfriendly welder can be used by almostanyone and has the power to tackle all sortsof jobs. It’s perfect for those needing awelder for making quick, small welds on alight duty cycle. The mPulse power settingsrange from 5.0ws to 30ws, in 2.5wsincrements - that’s 11 different powersettings to choose from. The mPulse worksamazingly well with Gold, Silver and manyother metals used in jewellery creation andrepair. It’s a superior alternative to any solderapplication; and, measuring in at 5.5” x5.25” x 3.625”, the mPulse takes up almostno space on your bench. The machine runson argon gas and we recommend thatyou purchase a bottle with abuilt-in regulator.Ref TW1M£1780.00
Scan tosee this in action
OMS LED RING LIGHT FOR USEWITH OMS MICROSCOPESSPECIFICATION:• Input Voltage (AC) 85v - 264v/50hz-60hz.• Output Voltage (DC) 12v.• Output current 140 + or - 10mA• Connection Dimension (Max) 60mm• LEDs x 60.• Working Distance 80 - 130mm• Brightness (Adjustable) 14000 Lux (at 100mm height)• Colour Temperature 6000K.
Ref TM7013 £69.66
PLEASE NOTE ALL PRICES QUOTED ARE EXCLUSIVE OF VAT AND CARRIAGE AND ARE RELEVANT FOR THIS MONTH ONLY
BIGGIN HILL 01959 543660 | HATTON GARDEN 020 7242 3711 | BIRMINGHAM Warstone Mews Birmingham B18 6JB 0121 236 9346
STEAM CLEANERS AND SOLDERING UNITS
FAST, EFFECTIVE CLEANING THAT’SALWAYS ON TAP. Cleans individual
pieces of jewellery or complete trays inone simple operation. Almost a must for
busy retail operations. Not only will it clean and make yourstock sparkle but will also freshen up tired displays. Bymanually reducing the pressure, whole pads can becleaned. Built to a very high specification, with an on/offfoot switch to leave both hands free when working theunit. Contains all necessary features, including automaticsolenoid release valve, automatic safety valve, water levelgauge, easy to read pressure gauge and many moreexcellent features. Cleaning is by high pressure steam(100psi) with no drop in pressure after operation. Capacity6 litres. Dimensions 540 x 240 x 410mm. Voltage 220v.STEAM TWEEZERS & STONE SAVERS ARE USEFULADDITIONAL TOOLS FOR USE WITH THE STEAM CLEANERS.
Ref TS30 £1655.00
SIMILAR TO OUR TS30 BUTFITTED WITH A DUAL HEADFOR FIXED AND WANDCLEANING. For cleaningindividual pieces orcomplete trays of jewelleryin one simple operation.Almost a must for busyretail operations. Not onlywill it clean and make yourstock sparkle but will alsofreshen up tired displays. By manually reducing thepressure, whole pads can be cleaned. Built to a very highspecification, with an on/off foot switch to leave bothhands free when working the unit. Contains all necessaryfeatures, including automatic solenoid release valve,automatic safety valve, water level gauge, easy to readpressure gauge and many more excellent features.Cleaning is by high pressure steam (100psi) with no dropin pressure after operation.Dimensions: 540 x 240 x 410mm
Ref TS30A £1985.00
AND FOR THOSE WITHLIMITED SPACE ...we canoffer a smaller unit, builtto the same exactingstandards as Ref TS30,but with a smallercapacity of 3 litres.Dimensions:380 x 240 x 380mmRef TS29£1410.00
STEAM TWEEZER - Used for holdingitems using the popular Eitan steam cleaners.Ref TS23 £2.90
STONE SAVER - Ideal where loose stonesare suspected. Item to be cleaned isplaced inside the stone saver.Ref TS24 £3.00
MODEL 60THE MICRO FLAME GASGENERATING SOLDERINGUNIT is one of the bestknown and respectedpieces of equipmentused in the jewellerytrade. Model 60 is mainlyintended for jobbing jewellers ormanufacturers and is suitable foralmost all precision soldering work encountered in thejewellery trade. Can be used by two operatorssimultaneously, by the addition of second operator kit(TS706). Dimensions 403 x 350 x 254m.PLEASE NOTE: TORCH HOLDER ILLUSTRATEDREF. TS708 IS AN OPTIONAL EXTRA.
Ref TS702 £1610.00
MODEL 30For jobbers and retailers,this unit is ideal for jumpring soldering, chain repairsand ring shanks up to3mm. Can be used by twooperators simultaneously,by the addition of a secondoperator kit (TS706).Dimensions 375mm x212mm x 175mm.Ref TS7011 £1290.00
ADDITIONAL BLUE TORCH with T piece and 2m of tubing.Ref TS706 £113.59
PLEASE NOTE ALL PRICES QUOTED ARE EXCLUSIVE OF VAT AND CARRIAGE AND ARE RELEVANT FOR THIS MONTH ONLY
BIGGIN HILL 01959 543660 | HATTON GARDEN 020 7242 3711 | BIRMINGHAM Warstone Mews Birmingham B18 6JB 0121 236 9346
VECTOR WATCHMAKERS LATHEPRECISION GERMAN MADE 8MM LATHE WITHA VERY COMPREHENSIVE RANGE OF ACCESSORIES,ALL HOUSED IN A STURDY WOODEN CASE.CONTENTS: Lathe bar (length 260mm), Headstock (height 47mm),Tailstock, 2 tool rests, Drilling tailstock, Adjustable foot, Compoundslide rest, 2 drawbars and a 48 piece collet set sizes 0.3 to 8.0mm.
Ref HL11 £3250.00
LATHE MOTORRemote Mounted Low-vibration, low-noise drive and polishermotor which is particularly strong at low speeds. This is whyit is especially suitable for use as a motor for lathes, where hightorque is required. The motor is brushless and it therefore needsno consumables. Made in Germany.
TECHNICAL DETAILS• Output: 100 watts• Speed: 0 – 6,000 rpm
(stepless clockwise or anti-clockwise)• Dimensions (L x B x H):
220mm x 220mm x 165mm• Mains operation: 230 V~ 50Hz.
Ref HL1A £675.00
Visit our web shop atwww.hswalsh.comfor all your manufacturing equipment
“POCKET” SCALES
TANITA 1479ZPROFESSIONAL SCALE suppliedwith leatherette pouch Capacity200g. Lowest weighing unit: 0.1g.Platform size: 102 x 75mm. Overalldimensions 76 x 158 x 10mm. Fourweighing modes: g, oz, ozt amddwt. Supplied with CR2032 battery.
Ref TS250 £59.00
CD SCALEA COMPACT DIGITAL SCALE 300g x0.1g. Supplied in CD style case. Easyto use 4 key operation with largeweighing surface and back litdisplay. Complete with vinyl pouchand 5 different CD cover styles tochoose from. Operates with 2 CR20
Ref TS2300 £25.00
TRUWEIGHT 600GThis balance has 4 weighing modes,a stainless steel platform withbacklit display and comes completewith leatherette pouch.Scale capacity: 600g - 21.16oz -19.29ozt - 385.8dwt.Lowest weighing unit: 0.1g 0.01oz0.003ozt 0.06dwt. Overalldimensions: 100 x 76 x 15mm
Ref TS2101 £10.65
NOTEBOOK SCALE2000G6 modes G-OZ-OZT-DWT-CT-GN.Stainless steel platform, backlitdisplay, overload protection,auto shut off.
Ref TS212000 £13.50
TANITADIAMOND SCALEAN EXTREMELY ACCURATE,COMPACT SCALE designedspecifically for diamond weighing,but equally suitable for allgemstones and small quantitiesof metal. Supplied with gem cup,test weight and carrying case.Capacity:100ct, 20g, 0.64ozt, 308 grains.Lowest weighing unit:0.01ct, 0.002g, 0.0001ozt, 0.05 grains.Overall balance dimensions:105 x 140 x 40mm.Supplied with 4 x AAA batteries.AC adaptor available on request.CE conformity.
Ref TS270 £175.00
GEMS BOOK OF THE MONTHExplore the diversity of gemstones with thiscompact and easy to use guide. Covers everymajor group of gems. Close-up photographsvividly reveal each gem and highlight itskey features and facets.
Ref TB17092 Was £9.99 Now £7.99
HS WALSH & SONS LIMITED - HEAD OFFICEHunter House, Biggin Hill Airport, Churchill Way, Biggin Hill, Kent TN16 3BNPhone: 01959 543660 Fax: 01959 574231
LONDON SHOWROOM44 Hatton Garden, London EC1N 8ER Phone: 020 7242 3711 Fax: 020 7242 3712
BIRMINGHAM SHOWROOM1-2 Warstone Mews, Warstone Lane, Birmingham B18 6JB Phone: 0121 236 9346 Fax: 0121 236 9355
SEPTEMBER 2016
www.hswalsh.com [email protected]
EN-SET ENGRAVING & SETTING EQUIPMENT
Hand-engrave and set stones with confidence, controland precision. The En-Set Digital Hand Engraving andStone Setting Tool allows you to hand engrave withgreater control. Set stones in gold, engrave in steel, sculptin platinum or inlay gold in titanium. A second port foranother hand piece provides more convenience forcomplex jobs. DIMENSIONS: Height 7.75 inches; Width5.75 inches; Depth 5.25 inches without moisture filter(including front knob) 8.75 inches with moisture filter.PLEASE NOTE THAT A COMPRESSOR IS REQUIREDTO RUN THESE UNITS.
Ref TB771 £1180.00
EN-SHARPEn-Sharp© is a precise sharpener machine for gravers andtools made of steel and carbide, very quiet and vibrationless. Create graver geometry and polish to a mirror finishsurface to obtain brighter cuts with your tools.Speed adjustment (250 - 850rpm) allows user to drasticallymodify tool geometry in a short time as well as regularsharpening at a slower speedof turn. Built in powerfulmotor ensures durability andsilence of operation. For usewith En-Set or GRS systems.Includes 1 x 600 grit diamondwheel.
Ref TB773 £430.00
THE EN-SETHAND ENGRAVER
INCLUDESPICTURED
HAND PIECE
REF TB772
EN-SET ORBITALRING FIXTURE
This specially designedholder to work on rings,holds them at differentangles so its easier forengraving and stonesetting. Brass colletsexpand from both sidesto hold rings and absorbany vibration from thepneumatic engraving.Four collets included tohold a variety of sizes.Ref TB775 £254.00
EN-SETINSIDERINGFIXTUREThis fixtureis machinedfrom solid brass whichadds weight to its masswhich helps controlvibration. The unit hasthree adjustment screwswith a flexible head so itcan hold almost anyring. Designed to beheld in a vice, at anyangle, which allows theright position to beobtained. Also, the ringholder wheel rotates soyou can continuouslyengrave without havingto stop and reposition.
Ref TB776 £216.00
EN-SET VICEThis fixture is machined from solidbrass which adds weight to its masswhich helps control vibration. Theunit has three adjustment screws witha flexible head so it can hold almostany ring. Designed to be held in avice, at any angle, which allows the right position tobe obtained. The ring holder wheel rotates forcontinuous engraving without repositioning.
Ref TB774 £325.00
PLEASE NOTE ALL PRICES QUOTED ARE EXCLUSIVE OF VAT AND CARRIAGE AND ARE RELEVANT FOR THIS MONTH ONLY
TO SEE ALL THIS MONTHS SPECIAL OFFERS VISIT OUR 24/7 WEB SHOP www.hswalsh.com
