Mold Cleaners Lubricants
Transcript of Mold Cleaners Lubricants
-
7/31/2019 Mold Cleaners Lubricants
1/3
Citra Cling Mold and Metal Cleaner
Nochlorinatedsolvents
Nopetroleumdistillatesorglycolethers
Clingstosurfacesformaximumperformance
Water-basedhighdensityfoam
Removesmoldreleases,dirt,oilandgreases
Citra Cling is an excellent cleaning agent that clings to
even vertical suraces. Superior clinging action allows
or maximum cleaning. Water-based cleaner is sae to
use on painted suraces and plastic parts (pre-testing
recommended).
No. 46515
Net Wt. 15 oz.
Mold Cleaner Plus Degreaser 4
Nochlorinatedsolvents Evaporatesfast
Leavesnoresidue
Slide Mold Cleaner Plus Degreaser 4 contains no
chlorinated solvents and provides a convenient method or
removal o silicones, grease, oil and wax build-up on mold
suraces, etc. without the need or wiping. Ideal or cold
molds, it leaves no residue so it cleans without wiping. It
has a ast evaporating ormulation, is non-conductive and
non-abrasive.
No. 46910
Net Wt. 10 oz.
No. 46930 30 lb. aerosol cylinderNo. 46905HB 5-gallon
No. 46955HB 55-gallon
Mold & Metal Polish
Nochlorinatedsolvents
Cleanandrestoresurfaces,easilywipes
on and off
Removesplate-out,oxidationandstains
Bringssurfacestoahighluster
Saely removes plate-out, oxidation and stains
on fne tooling suraces quickly and cost-
eectively. Ideal or all types o molds, dies
and fxtures, it restores surace fnish, while
providing a high, luster sheen. The polish has
proven eective on steel, stainless, aluminum,
brass, bronze, beryllium, zinc, powdered metals
and other materials used in injection, blow,
extrusion, compression, and rim molding.
No. 45210 10 ounce can
No. 45202 1.76 ounce tube
Mold & Metal Wipes
Nochlorinatedsolvents
Pre-saturatedcleaningtowels
Quicklyremovesreleases,grease,oilandmore
Replaceshazardouscleaningsolutions
Fast, convenient, pre-saturated sheets quickly clean almost
any surace.* Use or preparing molds or production or
storage; touch-up cleaning during production; surace prep
prior to secondary operations; and general maintenance and
all-purpose cleaning.
*Pre-test on non-metal surfaces.
No. 46370 Canister of 70 wipes
No. 46301 Box of 50 single-wipe packets
NEXGEN Cleaner
Nochlorinatedsolvents Food-approvedsolvents(GRAS)****
Leavesnooilyresidue
Meetstoughhealth,safety,environmentalregulations
Highsolvencyforresins,polymersanddies
NEXGEN is the most extraordinary cleaning product available.
Formulated purely rom citrus & vegetable products, it is so
much more than other natural cleaners. Use it or oil spill
clean-up and remediation, dewaxing, removing mold release
and degreasing.
No. 46410
Net Wt. 10 oz.
46401B 1-gallon
46405B 5-gallon
46455B 55-gallon
On/Cycle Mold Cleaner
Nochlorinatedsolvents
Useonwarmmoldsatthepress
Food-approvedsolvents(GRAS)****
Amulti-purposemoldcleaner
Willnotstainaluminum
NocausticoracidiccompoundsOn/Cycle is the ideal mold cleaner or use while in
production. It works on warm molds up to 150F and easily
removes releases, oils, greases and many resinous build-
ups beore they can become a problem. Made rom citrus
oils, it destroys odors, leaving a pleasant orange scent.
No. 44212
Net Wt. 12 oz.
44201B 1-gallon
44205B 5-gallon
44255B 55-gallon
Mold Cleaner
CL
CL
CL
CL
CL
CL
FA
FA
More cleaners on next page
-
7/31/2019 Mold Cleaners Lubricants
2/3
12
PC Polish Cleaner
AlsoknownasOldYellow
Removesstainsandmolddeposits
Conditionsyourmoldforfasterstartupsand
improved release properties
Protectsasitcleans
Particlesize
-
7/31/2019 Mold Cleaners Lubricants
3/3
Veri-Kleen
Nochlorinatedsolvents
Contactandmetalcleaner
UsesallEPAandSNAPapproved
ingredients
Excellentcontactcleanerandux
remover
Containsnoammableingredients
Veri-Kleen dries quickly, leaving no residue on
precision electrical equipment or parts. It is
ideal or circuit boards, tape heads, motors and
a variety o metal cleaning applications. Can be
used saely on operating electrical equipment.
No. 42012A
Net Wt. 12 oz.
Lubricants
Heavy-Duty Mold Release and PinLube
Nochlorinatedsolvents
Non-silicone
Paintable
Food-approvedlubricant(*****)
Dryreleaseminimizesleachingoutontoparts
An ideal lubricant or the ront hal o ejector pins (pinsin orward position), this almost dry lubricant minimizes
the possibility o leaching out onto molded parts. Use in
combination with application o Super Grease on back
side o ejector pins. Stable at temperatures up to 450F.
Heavy-Duty Mold Release and Pin Lube can be used on
plastics, rubber, waxes, glass-flled nylon and similar
materials.
Maximum Operating Temperature: 450F.
No. 54912 aerosol
Net Wt. 11.5 oz.
Silicone Emulsion Nochlorinatedsolvents
Water-basedsiliconeoilsolution
Food-approvedlubricant(++)
35% solids. Silicone emulsions are
advantageous or applications requiring
lubrication, gloss, antistatic, protective and
release properties.
No. 51932-1 1-gallon
No. 51932-5 5-gallon
No. 51932-55 55-gallon
Silicone Spray Lube
Nochlorinatedsolvents
Idealin-processlubricant
Food-approvedlubricant(++)
NSFCategoryM1
Silicone Spray Lube (SSL) has thousands o
uses. For paper and flm converters, it fghts
sticking and glue build-up problems. Use it on
slitter knives, rollers, slide guides. For ood
processing, it eliminates sticky ood buildup,
speeds cleaning. Use it on heat sealers, ovens,
guides, chutes, conveyors. For vertical blind
manuacturing, it is an excellent lubricant or
vertical blind tracks.
Operating temperature: 600F
No. 42112N
Net Wt. 12 oz.
Super Grease
Nochlorinatedsolvents
NSF-H1(non-aerosolformulations)
NLGI#2hightemperaturerangegrease
Food-approvedlubricant(aerosolonly)
Colorless&odorless,excellentdielectric
strength
ContainsPTFE,nosilicones
Willnotbleedout;paintable
Super Grease will not separate, run or allout and has exceptional load-bearing
properties. Thixotropic properties
provide excellent mechanical
stability when sudden temperature
changes occur. A clear, clean, non-
yellowing grease, Super Grease is ideal
or injection molds, mold assemblies, and
especially medical and ood grade plastic parts.
It also repels water and prevents corrosion.
Operating temperatures: -45F to +650F
No. 43911
Net Wt. 11 oz.
No. 43900T 14 oz. tube for grease
guns
No. 43900-01 10-gram tube
No. 43900-03 3 oz. tube
No. 43900-7 7-lbs.
No. 43900-35 35 lbs.
No. 43900-400 400 lbs.
Rating applies to aerosol formulation only.
USDA H1 rating: For use in federally inspected meat and poultry plants.
NSF-H1 for non-aerosol formulations
Mold Cleaners / Lubricant
CL
CL
CL
CL
CL
FA
FA
FA