Lubricants & Chemical Products - Msele Trading 24 · LUBRICANTS & CHEMICAL PRODUCTS INDUSTRIAL...

© F

otos

earc

h

Lubricants & ChemicalProducts

OS10_RSA_0666_OS 22/03/2018 14:49

Adhesives - Instant 725 670Adhesives - Spray 725 670Anti-Seize Lubricants 732 676Automotive Maintenance & Repair 732 678 - 680Cartridge Applicator Guns 715 669Chain, Drive & Rope Lubricants 732 674 Corrosion Preventatives 732 676Degreasers 727 671Food Safe Cleaners 740 685Food Safe Oils & Greases 740 684 - 685Hot Dips Coatings 708 668Industrial Cleaners & Solvents 732 672 - 673Leak Detectors, Flawfinders & Freezer Sprays 732 677

Lubricating & Penetrating Oils 732 675 - 676Markers - Line 734 681Markers - Paint 734 681Melting Pots 709 668Metal Working Lubricants 740 682Mould Release Agents 732 675‘O’ Rings 726 670Process & System Cleaners 740 683Sealants & Fillers 716 669Tapping & Drilling Lubricants 732 680Water Displacing & Maintenance Oils 732 678Welders Anti-Spatter 720 677

Description Group Page Description Group Page

667

Product Groups 703 - 740

Product Grading

Professional Industrial tooling that has enhanced features and benefits demanded by craftsmen and professional users.

MaintenanceProducts designed for general maintenance ofmachines, workshops, garages and some household applications.

ProductionHigh performance industrial tooling designed forcontinuous use applications on machine tools whererepeatability and long tool life are of critical importance.

Industrial Designed for regular use in industrial applications.Manufactured to stringent quality levels andinternational standards.

WorkshopStandard quality tooling for use by tradesmen and generally industrial use.

Home Improver DIY quality tooling. Designed for home use and light industrial applications.

Contents

OS10_RSA_0667_OS 22/03/2018 14:49 Page 1

PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2018668

LUBRICANTS & CHEMICAL PRODUCTS

HOT DIP COATINGS/MAINTENANCE & REPAIRGROUP

708/709

AD160Amber

RD160Red

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around thecomponent or tool being coated to provide 100% coverage andprotects against corrosion and impacts, for up to ten years. The component protected can be easily identified through thetranslucent coating. Simply removed by peeling it off, leaves behind athin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heatto melt the protective dip, always use with a suitable melting pot.Working temperature 130°C to 160°C (for optimum results 140°C to 145°C).

Description Weight Order Code Price/1(Bars) each KEN-708 RND

RD160 Single Bar 0.50kg -0050K 144.90RD160 Case (50) 25.00kg -0250K 6877.30AD160 Single Bar 0.50kg -0500K 144.90AD160 Case (50) 25.00kg -0550K 6877.30

Industrial Melting PotsA range of melting pots which have been designed for industrialmelting of waxes, glues and plastics etc. for coating, casting,protecting etc. The pots are electrically heated and thermostaticallytemperature controlled from 50°C to 200°C. Constructed fromanodised aluminium with ceramic fibre insulation. Pots supplied with2m cable and fused plug, lifting handle, double-wall heat-conservinglid, on/off switch and safety thermal cut-out. 220/240V as standard.

Capacity Internal Dimensions Maximum Order Code Price/1Litres Pints Diameter Depth Wattage KEN-709 RND0.7 1.20 100mm 90mm 275 -1010K 12853.002.5 4.40 150mm 140mm 600 -1030K 18827.606.0 10.5 200mm 190mm 1125 -1060K 24184.40

12.0 21.0 250mm 240mm 1650 -1120K 33895.30

Oil Stain Removers

A biological oil stain remover that rapidly removes and digests oil stains from block and concrete driveways, garage floors and forecourts.

Product Size Order Code Price/1Number SOL-707 RND

Suitable for Hard SurfacesOSRHSB-1 1ltr -5840A 252.30OSRHSB-5 5ltr -5842C 1134.20

Suitable for Tarmac & AsphaltOSRTA-1 1ltr -5858A 252.30OSRTA-5 5ltr -5860C 1134.20

new

OS10_RSA_0668_OS10_RSA_0668.qxd 22/03/2018 14:49 Page 1


PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2018 669

Sealant Cartridge Applicator Guns

Economy Plastic Gun - C3Robust, easy to use. Smooth action.Max. cartridge size: 310ml.

Professional Metal GunsExtremely robust and ideal for continuous use. Will not twist under pressure. Smooth action for optimum application of sealant.

Type Cartridge Order Code Price/1(max size) KEN-715 RND

C3 310ml -1200K 42.10


C3 310ml -1400K 126.20


C3 310ml -1000K 89.50C4 400ml -2000K 95.80

Ergonomic Sealant Applicator GunHeavy Duty Metal Gun - C3Extremely robust and ideal for continuous use. Will not twist underpressure, ergonomically designed to reduce operator fatigue. Smooth action for optimum application of sealant.

Silicone Sealants

General-Purpose SiliconeHigh performance acetoxy silicone provides a permanentlywatertight flexible seal and offers excellent adhesiveproperties, making it suitable for use on glass, sanitary-ware,ceramics and non-poroussurfaces. For indoor and outdooruse. Weather-proof. Mould-resistant. Life expectancy up to25 years. Conforms to BS 5889.

Colour Order Code Price/1SHK-716 RND

White -3100K 51.70Clear -3110K 51.70Black -3130K 51.70Grey -3140K 51.70

310ml

APPLICATOR GUNS/SEALANTS & FILLERS/JOININGGROUP

715/716

Description Order Code Price/1KEN-983 RND

Gas -8000K 18.90Water -9000K 7.10

Thread Sealing Tape -9010K 35.90

P.T.F.E. Tape

Gas Type: 12mm x 5m roll. For gas and hot water pipes (not for potable water). Made to BS EN 751:3. Water Type: 12mm x 12m roll. For hot and cold water pipes. Made to BS 6920 & BS 7786.P.T.F.E. Thread Sealing Tape:25mm x 12m roll.Made to EN571.

Non-Setting SealantGas SealNon-setting, off-white compound for use on metallicthreaded and face joints carrying gas including aluminium, copper,steel and zinc. Suitable for use with Propane, Butane, LPG and Natural gas. Ideal forboats, camping, motor-homes, caravans, BBQs and most domesticappliances. Full bond strength is achieved immediately dependentupon humidity levels. Can be wiped up with a disposable cloth, anyresidual excess can be rinsed with water.Temperature range: -20°C to +125°C. Maximum gas pressure: 2.9psi (0.2bar).

Size Order Code Price/1SHK-720 RND

400g -4010K 252.30

400g





3g -6010K 14.90

InstantAdhesive

High performance cyanoacrylate adhesive suitable for use on metal, plastic, china, leather,wood, glass and rubber. Bonds in seconds.

For Plastics

For Metal For Rubber

For Glass & Ceramics

1001 usesin the

Home andWorkshop

Product Type Number Order Code Price/1Number of Pieces SHK-726 RNDOR1 Inch 407 -5510K 132.10OR2 Metric 419 -5520K 153.40

Size rangeInch kit: 1/8” - 2”Metric kit: 3mm - 50mm

Instant Nails

A high strength gap filling solvent-free adhesive that produces a quick ‘grab’ andreplaces mechanical fixings ina multitude of homeimprovement applications.Dries white and is over-paintable when dry.


310ml -6500K 34.80

ADHESIVES - INSTANT/SPRAY/STRUCTURAL GROUP

725


500ml -4240K 106.80

Heavy Duty Spray AdhesiveProvides a flexible but ultrastrong bond for manyapplications from foambacked carpets and carpettiles, underfelt, flexiblefoams, fabrics, felt and corkto plywood, softwood, MDF,laminates, metal,hardboard, glass and rigidplastics.

500ml

Nitrile ‘O’ Ring Service Kits

Inch ‘O' Rings manufactured to BS1806. Metric ‘O’ Rings manufactured to DIN 7715 standards. Both kits are supplied in a durable storage box with sunken cavities for the simple location of the correct sized rings.

Heavy Duty Spray AdhesiveSA-90Provides a strong flexiblebond for many applicationswhere a conventionaladhesive would be toodifficult to apply. Ideal for useon foam backed carpets,underfelt and for spot fixingcarpet tiles. Can also be usedto bond all types of flexiblefoams, fabrics, felt, cork etcto plywood, softwood, MDF,laminates, metal, hardboard,glass, rigid plastics etc. Easilyapplied straight from the can.

The Tradesman’sChoice

Size Order Code Price/1ACN-732 RND

500ml -8750K 108.30

500ml

new



DEGREASERSGROUP

727


Aqueous OrangeCitrus-Based Aqueous CleanerAqueous Orange is highly concentrated, low alkaline blend of citrus solvents andpowerful surfactants, designed to remove oilsand greases, inks, polishing compounds andlapping slurry from hard surfaces. It can be diluted with water for maximumeconomy and its micro-emulsion formulaoffers the benefits of water-based efficiencywith solvent based performance. It alsocontains a corrosion inhibitor and can be

used both manually and in machineoperations.

Replaces white spirit, paraffin andhighly alkaline cleaners.

Size Order Code Price/1SOL-727 RND

1ltr -2800A 142.205ltr -2810B 780.60

20ltr -2820C 3027.40


5ltr -2910B 930.2020ltr -2920C 3614.00


5ltr -2610B 733.6020ltr -2620C 2858.20

Orange PlusCitrus-Based Water Rinseable DegreaserOrange-Plus is a highly effective, waterrinsable solvent degreaser for the removal ofstubborn and heavy oils, greases, paints,inks, adhesive and resins from engineeringcomponents and equipment. Once cleaned, the contaminants can berinsed away with water. Suitable for allmetals, including plant and machinery, andsome plastics. Contains no chlorinated oraromatic solvents. For use as an alternativeto solvents such as xylene, toluene,acetone etc.Not recommended for use withParts Washers NATURAL

FORMULA

INDUSTRIALSTRENGTH

Just Orange

Citrus-Based Solvent DegreaserJust Orange is a powerful, citrus-based solventdegreaser for the cleaning and degreasing ofengineering components and equipment.Effectively removes heavy oils, greases,bitumen, wet paints, adhesives and sealantsfrom virtually all hard surfaces.Contains no chlorinated or aromatic solvents.For use as an alternative to solvents such asacetone, benzene, butyl cellusolve, CFC’s,freon, methylene chloride, HCFC’s, isopropylalcohol;, methyl ethyl, ketone, mineral spirits,toluene, trichloroethylene,xylene etc.

Biodegradable Degreaser

For cleaning and degreasing equipment and parts. Safe for use allaround the house even on delicate surfaces. Powerful degreaserremoves difficult soils such as dust-laden oils, fuels and lubricants.For vitually all hard surfaces and ferrous metals. Non-toxic, non-reactive and non-carcinogenic. Derived from renewableresources. Size: 1ltr.


1ltr -3240D 164.50

Oil Stain Removers

A biological oil stainremoverthat rapidly removes and digests oilstains from block and concrete driveways, garage floors andforecourts.


Suitable for Hard SurfacesOSRHSB-1 1ltr -5840A 252.30OSRHSB-5 5ltr -5842C 1134.20

Suitable for Tarmac & AsphaltOSRTA-1 1ltr -5858A 252.30OSRTA-5 5ltr -5860C 1134.20

new




INDUSTRIAL CLEANERS & SOLVENTSGROUP

732Cleaner Spray

SC1-500B Industrial Rapid Dry Solent rapid dry solvent cleaner is supplied in a large 500ml aerosol. The product is formulated to quickly penetrate grease, oil and general soiling from metal/electrical components andprecision parts. The formulation rapidly evaporates leaving a clean, dry surface. Safe on most plastic components. Will soften some lacquers. If in doubt about suitability test on a scrap component or a small area before general application.

Product Order Code Price/1Number

SizeSOL-732 RND

SC1-500B 500ml -0100K 217.30

Low Odour Cleaning SolventSC2-500BPowerful solvent product. Very fast dryingwith a good compatibility with most materials. Designed for the engineering andelectrical industries. As with all solvents testfor compatibility before general application. The low odour level is ideal for cleaningitems where product odour would beinappropriate.

Order Code Price/1Size SOL-732 RND500ml -9640K 142.70

Metal Parts CleanerSC3-500BCitrus based solvent cleaner.Citrus cleaners are an effectivealternative to pure solventproducts. Deep penetratingaction rapidly removesoils/grease/and generalsoiling. Supplied in a 500ml foreconomy.


500ml

500ml

500ml

Air Duster

HFC-free. Designed to remove dust and dirt from hard to reach areas.Environmentally friendly, does not contribute to global warming.Extension tube included.

Order Code Price/1Size SOL-780 RND400ml -6800A 89.00

400ml


Sticky Label RemoverLR1-250BDesigned to quickly and effectively removeold and difficult to remove self adhesivelabels from a wide variety of surfaces.Formulated with extra strength for theindustrial user. Rapidly removes labels from, metal, tile, ceramic, powder coated and glass surfaces. Also removes chewing gum, marker pen ink, and ball point pen ink.

250ml


500ml -0300K 157.10

Graffiti RemoverSG1-500BAn aggressive graffiti remover suitable forcleaning the following surfaces: polyethylene,polypropylene, nylon, UPVC, bare metalsurfaces, powder-coated surfaces, varnishedwood, reflective signs and acrylics. May beused on some gloss paints (small test area first advised).

500ml



INDUSTRIAL CLEANERS & SOLVENTSGROUP

732


Cleaner Spray

SC2-500C Electrical ContactCleaner Spray - Trike-freeAn effective solvent based cleaner. Theproduct is formulated to remove oil, greaseand carbon dust from electrical switch gearand electronic components. It is safe on mostcommon plastic parts, but will attack lacquerfinishes and coatings. If in doubt aboutsuitability, trial the product on a scrap samplefirst before general application. The product ispropelled from the aerosol by CO2 carbondioxide gas (non-flammable). Electrical SwitchCleaner fluid is flammable. Always ensurepower is switched off before applying thisproduct to electrical equipment.

Product Size Order Code Price/1Number SOL-732 RNDSC2-500C 500ml -0120K 259.20

Trike-free Contact CleanerCCA500C Electrical ContactCleaner Spray - Trike-freeSuitable for cleaning and degreasingdelicate components such as those usedin electrical equipment. It can be used onmost surfaces and will not effect PCBs,delicate plastics or painted surfaces. Non-corrosive. It contains only solventswhich are permitted under the MontrealProtocol.

Product Size Order Code Price/1Number SSF-732 RNDCCA500C 500ml -3120K 91.20

Foam Cleaner Anti-Static SpraySC5-500BCuts through grease, dirt, oil and general soiling,contains no silicones. Ideal for non-poroussurfaces. 1000+1 uses in the home, industry,garage or factory.

Container Size Order Code Price/1Type SSF-732 RND

Aerosol 500ml -3180K 81.40

Container Size Order Code Price/1Number SOL-732 RNDSC5-500B 500ml -0180K 148.00

Antistatic Foam CleanerFCA500This cleaner is recommended for the everydaycleaning of electronic and electricalequipment. It removes stubborn stains,nicotine, grease and general grime build-upfrom plastic, formica, leatherette, ceramics,glass, paintwork or any other non-porous hardsurface. Ideal for use in offices, canteens,banks, schools, kitchens, washrooms andmany other problem areas. It has beenformulated from surfactants and solventswhich are safe to use on most surfaces.

500ml

500ml

500ml

500ml

Pistol Grip Can Holder & Sprayer

For aerosol sizes 300ml/ 400ml/500mlcans. Protects hands from cold cans andchemical contact.

For Aerosol Order Code Price/1Size (ml) ACN-732 RND

300/400/500 -9500K 55.90


500ml -9200K 151.70

Electronic CleanerPlastic SafeIPAAn effective formula forremoving dirt and tapeoxides from audio andvideo recording heads.Suitable for removal ofcarbon deposits fromphotocopy equipment.Effectively absorbsmoisture from electroniccomponent PCBs. Meets the followingapproval BS1595, ASTMD 770, DIM53245.


500ml -5800K 171.10

Trike-free CleaningSolvent

TF-90 Formulated to replacetrichloroethylene-basedsolvent cleaners. Rapid dryformula will remove oil,grease, tar, carbon andgeneral soiling. Suitable forelectrical part cleaning,electronic part cleaning andgeneral degreasing work etc.Cans printed in English,French and German suitablefor supply in the EU.

500ml

500ml

new

new new




CHAIN, DRIVE & ROPE LUBRICANTSGROUP

732Drive Belt Dressing SpraySB1-500BReduces slip on drive belts and helps to stop belt squeal.Can be used on drive belts exposed to weather, ideal for farm machines, alternator drive belts and fan belts. Helps to stop cracking and extends belt life. Can be used on rubber, leather,canvas and most types of synthetic belts.

Chain & Drive Spray Lubricant

SM6-500BFormulated to have a wide range of operating uses. Ideal lubricant formoving chains under extreme load and for chains not fitted withautomatic lubrication nor running in oil baths. Formulated with a ‘tacky additive’ to resist‘throw off’ on rapidly moving chains and drives. Ideal for fork trucks/conveyersystems/motorcycle chains. Can be used asa general-purpose lubricant for itemssubjected to extreme weather conditions. Canbe used as a slide-way lubricant for machinetools. Strong anti-rust qualities. Does notcontain silicone or CFCs.

Product Size Order Code Price/1Number SOL-732 RNDSB1-500B 500ml -0060K 254.00


SM6-500B 500ml -0500K 197.80

Size Order Code Price/1SSF-732 RND

500ml -3450K 109.00

Wire Rope Lube SprayWRS500This spray lubricant has beenformulated to lubricate andprotect wire ropes fromcorrosion. It has goodpenetrative qualities to lubricatedeep into the core of ropes,displacing water and increasingthe life of the rope. ‘Hi Tack’additives provide excellentadhesion to metal and reduced‘fling off’ during use.


500ml -3500K 91.20

Chain & DriveSpray

CCA500This product is a special blendof quality oils, greases andsolvents, designed to lubricateand protect all types of cablesand slow moving chains. It penetrates quickly into thecentre of cables providingexcellent protection to the core.It will not sling off, drip or dry outeven in adverse conditions. It will also penetrate chainrollers and links enablingsmoother working and reducefriction, wear and the possibility of seizure.

500ml

500ml

500ml

500ml


20ltr -4800B 2691.30

Heavy Duty SystemCleaner Grade SC-SYSTEMFor cleaning water-based operating fluids andcoolants from central systems or individualmachines. Free of secondary alkanolamines,heavy metal compounds, phenols,hexahydrotriazine and nitrite. Storagetemperature of 5 to +40°C. NOTE: So-CleanSystem at 1- 2% is added to the usedoperating fluid about eight to twelve hoursbefore draining. Soil in machines, tubes andreservoirs of the system are loosened and re-emulsified. For heavily soiled systems,increasing the dwell time to 24 hours isrecommended. Thick sediment deposits arebest removed mechanically and rinsed offwith clean water. Supplied in 20ltr stacking poly container.

20LTR

Chain & Drive Lubricant

CD-90For all types of driving chains, bearings,conveyor systems and fast moving load-bearing parts. Temperature range 30°C to150°C. Excellent anti rust performance. Cans printed in English, French and Germansuitable for supply in the EU. No solventcontent for maximum value.


500ml -2250K 184.20

500ml

new



MOULD RELEASE AGENTS/LUBRICATING OILSGROUP

732


Air Tool LubricantExcellent air release quality, low foamingability and resists clogging. Contains anti-rustand anti-wear additives. Extremelyresistant to water absorption andcan be mixed with all mineraloil based lubricants withoutdraining the system. ISO Grade VG22.

Size Order Code Price/1KEN-732 RNDPoly Bottle

500ml -8000K 125.00Can

5ltr -8050K 1126.40

Group 540

Polyurethane Silicone ReleaseFluidSR4-500B - For PolyurethaneFor use with integral skin andelastomeric polyurethanes.Provides high gloss finish,low build-up on the mouldsurface generated to 200°C.Very low odour. Siliconebased product may not besuitable for use wherepainting, plating work isrequired.

Silicone ReleaseSpraySR1-500B - For Plastics &RubberFormulated with a highsilicone content. Suitable for a wide range of uses. SR1-500B is a dry, non-oily,non-greasy product. Waterclear with no odour.


500ml -0700K 270.10

500ml

500ml


500ml -9700K 166.90


500ml -9680K 242.60

Non-SiliconeRelease AgentSN1-500B - For Plastic & RubberSpecifically formulated forrapid release of mouldedcomponents. Particularly suitable formoulded items whichrequire further process.Painting, printing andthermo welding.

500ml


500ml -9720K 245.90

Thermoplastic SiliconeBased Release AgentSR6-500B - ThermoplasticFormulated to provideeffective release of plasticswith lower melttemperatures. Effective withnatural rubbers. Effective to200°C, excellent surfacefinish.

500ml

Silicone ReleaseSpray SP-90Superior non toxic lubricant.Low odour and non staining.Reduces friction and static. Wide operatingtemperature -50°C to 200°C.Protects against corrosionand oxidation. Cans printedin English, French andGerman suitable for supplyin the EU.


500ml -9000K 151.70

500ml

Machine OilGeneral purpose oil sprayfor all around use in factories and workshops. Approval number 1796809.Does not contain any Allergens. CFC free. Cans printed inEnglish, French and German suitable for supply in EU.


415ml -7840K 75.40

415ml


500ml -8880K 118.80

Synthetic Lubricating Oil with PTFESL-90Fully synthetic. Strong anti-fling properties. Wide operating temperature from -35°C to +200°C. Multi viscosity capability. Good metal to metal parts lubrication. Water, steam, acid and alkalis resistant. Corrosion inhibitor built-in. Clean and clear. Silicone- and CFC-free. Cans printed in English, French and German suitable for supply in EU.

500ml

Order Code Price/1SizeSOL-732 RND

500ml -0450K 114.70

Multi-Purpose Oil Spray CO2SM3-500CMulti-purpose minerallubricating oil formulated tohave a wide operating range.It lubricates, penetrates,cleans and protects. Use onlocks and hinges. Cleans andprotects tools. Helps torelease stubborn and rustedbolts. Does not containsilicone or CFCs.

500ml

new

new

new




ANTI-SEIZE LUBRICANTS/CORROSION PREVENTATIVES & PENETRATING OILSGROUP

732

Anti-Rust Protection SprayA soft thin film moisture/corrosion protective coating. The coating has a slight greencolouring which clearlyindicates treated areas. Ideal for longer term moisture/corrosion protection ofmachined components/moulding dies and tools.Removed easily with SolentIndustrial Cleaner.


SizeSOL-732 RND

SP1-500B 500ml -0600K 258.00


SizeSOL-732 RND

SP2-500B 500ml -0620K 247.70

Heavy Duty Anti-Rust Protection SprayHigh performance corrosioninhibitor, sprayed directly ontothe surface to be protected.Light brown in colour toidentify treated surfaces. Thefilm has self-healingproperties and is easilyremoved with solventcleaners. Coating resistsmoisture, acid and alkalifumes. The film does notcontain silicone or halogens.Corrosion protection periodsvary with environmentalconditions. Typical interiorprotection in the UK in excessof two years.

500ml

500ml

Product Order Code Price/1Number Size SOL-732 RNDSD1-500B 500ml -0200K 451.60

Dry Moly SprayPremium grade drymolybdenum particlelubricant. Fast drying. Ideal for fastenerlubrication. Effective on allgrades of steel, copper,brass, stainless steel andfoundry equipment wherehigh temperatures up to450°C are common. Also for open gearlubrication and anylocation where a wetcoating is not acceptableor would burn off. Works at up to load ratesof 100,000psi. No silicone content.

500ml

Copper GreaseSpray Copper grease spray isparticularly effective oncommercial/ passenger vehicle braking systems.Extra heavy-duty coppergrease with graphite. High copper content -effective up to 1100°C. No lead content/no CFCs/no silicone/no chlorinated content.Directional spray button forprecision application.

Product Order Code Price/1Number Size SOL-732 RND

SM7-500B 500ml -0520K 196.00

500ml

Food Grade Anti-GallingLubricant

AG-90An extreme pressure ratedlubricant. Formulated to preventgalling and cold welding ofstainless steel, titanium,aluminium fasteners. Particularly effective whenused with powered nutrunners. The product isreinforced with PTFEDuPont food grade. H1 Food Grade approvedInS registered#1796317.

Container Size Order Code Price/1Type ACN-732 RNDOil can 200ml -0610K 186.60

Container Order Code Price/1Type Size ACN-732 RND

Aerosol 500ml -3000K 173.50Tub 500ml -3010K 151.20

Copper Anti-SeizeGrease with Graphite

CS90High quality grease. Free from lead, zinc, nickel and silicone. Contains micro fine copper flakes and micro finegraphite flakes. Increased lubrication with added graphite. Very high temperature resisting rate. Waterproof, anti-corrosion, anti-rust, anti-acid and heat resistant.

500ml

Order Code Price/1SizeSOL-732 RND

500ml -0400K 121.00


500ml -3400K 83.20

Penetrating SprayPOA500For dismantling, lubricating andcleaning. This oil displaces waterleaving a hydrophobic coating to protect surfaces from corrosion.It penetrates threads andcrevices to release and lubricatedelicate mechanisms, pivotpoints and sliding surfaces whilstdegreasing hard surfaces.

Penetrating SpraySM1-500BRapidly penetrates into rust andcorroded fittings. Can be used onwet metal components, does notcontain silicone, CFCs orchlorine. Lubricates threadsduring release procedure, 30%less dense than water.

500ml

Cold Galvanising Spray Matches colour of newlygalvanised metal. Ideal forprotecting welding joints. Can be used as a top coat orprimer. Compatible withmost paint finishes.Contains no CFCs or lead.

GalvanisingSpray

Fast drying corrosion protection.Matches colour of newlygalvanised metal. Ideal forprotecting welding joints. Can beused as a top coat or primer.Compatible with most paintfinishes. Contains no CFCs orlead.


SizeSOL-732 RND

SZ1-500B 500ml -0900K 203.50


SizeSSF-732 RND

CGA500 500ml -3900K 137.60

Manufactured and tested to: ASTM B117

(Hot Salt Spray)BS AU 148:PT14 1969(Natural Weathering) DIN EN ISO 12944-1(Corrosion Protection of

Steel Structures)

500ml

500ml

500ml

new

new



LEAK DETECTORS, FLAWFINDERS & FREEZER SPRAYSGROUP

732


Fault Detector Freeze SprayFault Detector Freezer spray is a very coldrapidly evaporating highpressure gas jet. Applying toelectronic components willlower the temperature of thecomponent. Any faultyoverheating component willcool and return to correctoperation, thus indicating thefaulty component. Cools objects very rapidly downto temperatures of -50°C. Canalso be used to shrink fit metalparts where the application ofheat would be inappropriate andcan be used to freeze chewinggum deposits to aid removal.

3-Part Flaw Inspection SystemFast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members,critical castings, shafts, gears, spindles andany other hard part where identification ofsurface flaws is essential. Detects flawssuch as cracks, pin holes, welding laps andporousness either during manufacture or on-site.

Flaw Detector DeveloperWhite film to highlight any faults which havebeen detected when using Flaw DetectorPenetrant. The product should be removedusing Flaw Detector Cleaner Spray oncecracks have been found and marked.

Flaw Detector Dye PenetrantHighly sensitive red dye, for use whendetecting flaws on metal components undernormal lighting conditions.

Flaw Detector Cleaner SprayQuick drying, powerful solvent for cleaningsurfaces prior to testing. Removescontaminants including oils, greases andgrime.

BIG VALUE500ml Cans!

Leak Detector SprayA specially formulated,performance white fluid,designed to identify even thesmallest gaseous leak.Applies a thin uniform film ofsurface active agents whichidentifies any leak or bleedingof joints. Bubbles in the filmindicate the location of theleak. Will not give a falsereading if mechanical sensingequipment is used. Suitable for use with mostcommon gases.

Product Size Order Code Price/1Number SOL-732 RNDSF3-500B 500ml -0280K 208.70

Product Order Code Price/1Number Size SOL-732 RNDSL1-400A 400ml -0340K 142.20



Product Size Order Code Price/1Number SSF-732 RNDLDA500 500ml -3340K 82.10

Leak DetectorSprayFor checking for the mostminute leaks in any gas or airpressurised systemsincluding commercial vehicleair brakes and pressurevessels. Contains no alcoholsor solvents, is not causticand contains a rust inhibitor.Spray directly onto thesuspect area using theextension tube and examinefor bubbling which willindicate leakage.

Product Order Code Price/1Number Size SOL-732 RNDSFC-415F 415ml -9580K 256.80

500ml

500ml

400ml

415ml

Welder’s Anti-Spatter SprayDuring welding small blobs of molten metal (spatter) fall either side of the weld. This spray is applied before welding to prevent spattersticking to the metal. CO2propelled aerosol. Silicone-freeand removable with solvents priorto galvanising or painting.

Multi-Use Fluid:• Welding wire (MIG) lubricant.• Post weld corrosion protector.• Silicone- and CFC-free.• Easy to wipe or rub away.• Non flammable product.• Non flammable propellant.

Product Order Code Price/1Number Size SOL-732 RND

SW1-400C 400ml -0840K 83.70

Order Code Price/1Size SOL-732 RND5ltr -9300K 161.7020ltr -9310K 558.80

400ml

Maintenance Welder’sAnti-Spatter FluidReduces the risk of joint puddling and greatly reduces preparation time prior to finalpainting. Does not affect anysubsequent galvanising orpainting operations.Evaporates under normalweld temperatures.Dichloromethane andsilicone-free. Non-flammable, non-toxic, non-corrosive andbiodegradable.

Product Size Order Code Price/1Number ACN-732 RND

LD-90 (Spray) 400ml -6200K 121.20LD-90 (Gel) 250ml -6190K 118.30

Leak Detector Spray & Gel

Designed to identify even the smallestgaseous leak. Bubbles in the applied film indicate location of the leak. Suitable for use with most common industrial gases. Meets BS EN 14291:2004. Complies with MoT regulations. Does not contain mineral oil or Ammonia. Cans printed in English, French and German suitable for supply in the EU.

Anti-Spatter Spray

AS-90Prevents build-up of weld spatter on work, nozzles, jigs and fixtures. Fast acting. Multi-Use Fluid:• Welding wire (MIG) lubricant.

• Post weld corrosion protector.

• Silicone- and CFC-free.• Easy to wipe or rub away.• Non-flammable product.• Non-flammable propellant.

Product Aerosol Order Code Price/1Number Size ACN-732 RNDAS-90 400g -1000K 72.50

400g

new

new




AUTOMOTIVE MAINTENANCE & REPAIRGROUP

732

Auto Body Filler Applicator Set4 Piece SetSpring steel blades with composite grips.Suitable for the application of auto body filler. Blade widths: 12, 25, 50 and 75mm.Size (W x H x D): 123 x 210 x 5mm.

FillerApplicators

100mm wide plastic spreader, suitable forthe application of auto body filler.

Order Code Price/PkKEN-503 RND-2825K 54.00

4PIECES

MaintenanceSpray

SM4-500C ‘M4 Plus’High performance mineral oil based lubricant with PTFE.Helps start damp engines and releases rusty fixings.Cleans metal surfaces and prevents rusting of treated parts.Does not contain naphtha, kerosene or paraffin which are allassociated with operator skin dryness, cracking or dermatitis.CO2 non-flammable propellant. Does not contain silicone.Electrically non-conductive at normal ranges found in the home.Care must be taken if used on electrical plastic componentswhere ‘crazing’ may occur.


SizeSOL-732 RND

SM4-500C 500ml -0460K 125.00

500ml

Product Size Order Code Price/1Number ACN-732 RNDAerosol 250ml -0050K 67.80Aerosol 425ml -0150K 88.90Aerosol 500ml -0180K 100.30Can 5ltr -0200K 744.50

Applicator -0500K 82.10

Maintenance Liquid

AC-90Displaces water, helps startdamp engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc. Aerosols that use no CFCs and are ozone friendly or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin or Naphtha.


600ml -9550K 49.40

De-IcerA fast acting de-icer, perfect for those frosty mornings orevenings. The effective formulahelps prevent the windows from re-freezing and works totemperatures of -20°C. Handysized aerosol can that's quickand easy to use.

600ml

Deluxe Ice ScraperTough one piece scraper for the effective removal of snow and ice.Width: 95mm.Length: 210mm.

Order Code Price/1SOL-907 RND-4520K 32.00

Genuine Chamois LeatherSize: 60 x 30cm.

Weight Order Code Price/1each KEN-907 RND60g -4130K 336.80

Size Order Code Price/1KEN-503 RND

100mm (4”) -2820K 97.00

5PIECES

Supertrol Rust Proofing Fluid

Rapidly penetrates into welded seams and metal to metal joints. Displaces water and seals the surface to prevent corrosion. Used to protect all internal sections including door panels and sill section. Does not harden or crack. Flexible water repellent coat gives all weather protection.

Product Size Order Code Price/1Number ACN-732 RND001 500ml -8260K 93.90

500ml

new



AUTOMOTIVE MAINTENANCE & REPAIRGROUP

732


Concentrated Screen WashThe anti-smear formula leaves a crystal clear windscreenwith every wash and resists freezing, ideal for wintermotoring. Contains water softeners.Dilution RecommendationSummer: 25% 1 part wash to 3 parts water.Winter: 50% 1 part wash to 1 part water.Harsh Winter: use neat.


25ltr -4250K 311.30

De-ionised Water DW25For use in lead-acid car batteries.Also suitable for domesticappliances such as steam ironsand steam cleaners,avoids problemscaused by scaling.Can be used as a final rinse incar washing toavoid ‘spotting'.Also suitable forrinsing scientificglass-ware.


500ml -9440K 80.30

Dashboard ShineDesigned for cleaning,polishing and protectingdashboards and interior andexterior trims. It restoresoriginal colour and leaves ahigh shine finish with a freshstrawberry fragrance. Ideal foruse on plastic, vinyl andrubber. Easy to use with aspray-on and wipe application.


500ml -9450K 80.30

Leather Cleaner Enriched with Carnauba wax and Beeswax to clean,condition and protect a car’sleather interior. Regular usewill help maintain supplenessand prevent leather from drying and cracking.Spray-on application makes it easy to use and it is waterresistant and non abrasive.

25LTR

500ml

500ml

Wash & WaxHigh foam, high gloss vehicle shampoo. Mild formula, neutral pH, water-based.Effectively lifts traffic film without harm to polished paintwork and trim. With foamboosters for fast removal of dirt and grease. High gloss wax finish. Can be used with hot orcold pressure washing systems or hand washing. Easy to handle container.

Type Size Order Code Price/1SOL-780 RND

Poly Bottle 5ltr -6500A 219.70Plastic Drum 20ltr -6510B 808.40

Traffic Film Remover ConcentrateEffectively removes dirt, grime, grease and tenacious traffic film from all vehicles. Suitable forcleaning chassis and bodywork on vehicles. Designed for high pressure washing withmechanical power wash systems. Concentrated formula can also be used to clean machinery, floors, walls, asphalt, will also remove co-polymer waxes used in new carproduction.

Type Size Order Code Price/1SOL-780 RND

Poly Bottle 5ltr -6400A 185.70Plastic Drum 20ltr -6410B 636.60

Product Size Order Code Price/1SOL-732 RND

Concentrated 5ltr -9400K 135.90Screenwash 25ltr -9420K 454.60



GROUP

732 AUTOMOTIVE MAINTENANCE & REPAIR/TAPPING & DRILLING LUBRICANTSLUBRICANTS & CHEMICAL PRODUCTS

Sherwood STD

Fluid SprayNon-soluble tapping anddrilling aerosol spray thatpenetrates and clings tonormally inaccessible areasand moving cutting edges.

Lubricant Weight Order Code Price/1Type

Sizeper 12 SHR-732 RND

Spray 400ml 5.1kg -4000K 174.90

GROUP

085

STD Tapping & Drilling Non-Soluble Foam LubricantFoam aerosol penetrates and is able to cling tonormally inaccessible areasand moving cutting edges. Can be used on yellowmetals without the risk ofstaining.

Lubricant Size Order Code Price/1Type SHR-732 RNDFoam 400ml -4210K 158.20

Lubricant Order Code Price/1Type

SizeSHR-732 RND

Liquid 500ml -4020K 217.90Liquid 5ltr -4060K 2046.90

Compound 500g -4040K 183.50

Sherwood STD Liquid (Poly Bottle)Low odour liquid. Coats the cutting edge witha film of EP additives.Sherwood STD Compound Low melting point paste maintains acontinual lubricant feed to the cutting edge. Hand applied. Suitable for the most severecutting operations.

400ml

400ml

Window CleanerSimply spray on andwipe off to leavewindows clean andsparkling. Contains vinegar forextra cleaning and ademisting additive.


750ml -3025M 47.10

Alloy Wheel Cleaner

Cleans hardened brake dust,dirt and road grime thataccumulates on alloy wheels.Powerful, acid-free formula toremove grease and oil.

Tyre Shine Durable, long lasting formulais designed to give used tyresa ‘new look’ deep gloss shinewhile helping to preventweathering and fading.


500ml -9460K 96.30

Brake & ClutchComponent Cleaner

BC90 A fast evaporating effective cleaner forbrake components. Effective formulation forsuppressing dust and debris.Kind to skin.


500ml -1500K 123.30

Brake Cleaner MP7116A fast drying, solventbased, heavy dutydegreaser designed toremove dust, greaseand oil from brakecomponents and clutchassemblies. Eliminatesbrake squeal and clutch slip caused bycontaminated components. Easy to use 360° sprayapplication.


600ml -9520K 74.60

500ml

500ml

500ml

600ml

750ml


500ml -9430K 72.30



MARKERS - PAINT/LINEGROUP

734


Colour Size Order Code Price/1KEN-734 RND

Yellow 46ml -3020K 114.70White 46ml -3040K 114.70Blue 46ml -3060K 114.70Green 46ml -3080K 114.70Black 46ml -3100K 114.70Red 46ml -3120K 114.70Orange 46ml -3140K 114.70

Industrial Paint Markers

Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metalsurfaces. Also suitable for marking glass, plastic, wood,ceramics etc. Ballpoint nozzle cap will only allow ink flowwhen applied and pressed to the workpiece. One head can be interchanged from differing inks and bottles. Can be refilled.

Please note, colours are for guidance only.

Material Ball Order Code Price/1Size KEN-734 RND

Nickel 2.4mm -3500K 45.90

Ballpoint HeadReplacement ballpoint head for KennedyIndustrial paint 46ml marker bottles.

Colour Size Weight Order Code Price/1each KEN-734 RND

Yellow 1ltr 1.4kg -3210K 859.80White 1ltr 1.4kg -3230K 859.80

Colour Application Order Code Price/1KEN-734 RND

White General Marking -6020K 137.60Yellow Hazard/Caution -6040K 137.60Blue Mandatory -6060K 137.60Red Prohibition/Danger -6080K 137.60Green Safe Condition/Direction -6100K 137.60Black Deletes Existing Lines -6140K 137.60Grey Deletes Existing Lines -6160K 137.60

Line Markers

For use on car parks, playgrounds, sports fields, road surfaces etc.For stencils, line or free hand marking. CFC free formula, contains nolead additives, compatible withmajor brand applicators. Will give 60-100 metres of a 50mm linewhen used in a standard machine.

Please note, coloursare for guidance only.

750ml Can

Line Marking GunManufactured from reinforced nylon. For offering trigger action to line markingspray cans, giving improved comfort duringprolonged use.

Order Code Price/1KEN-715 RND-6200K 572.30

MicrometerPaste

Oil-based paste for indicating high spots onmachine bearings, machine tool beds etc. Easily removable withmethylated spirit.

Industrial PaintMarkers

Bullet Tipped For use on steel, aluminium, rubber, timber,plastic, ceramics and other materials. Bullet tipped. 2.3mm point size.

All Prices are per Paint Marker

Colour Order Code Price/1SOL-734 RND

Green -0030K 93.80White -0050K 93.80Yellow -0060K 93.80

BEST SELLER

Colour Pack Order Code Price/1Size MIR-734 RND

Blue 32g Tube -8810B 103.2038g Tin -8800A 112.30

RemoverIndustrial methylated spirit based blend for easy removal and minimum residual effect.

Layout FluidIndustrial methylated spirit based.TransparentFor use on bright metals. The scribed or scored lines showclearly without chipping. OpaqueFor use with heavy and black metals.When scribed or scored the dark metalshows up well against the film. Can also be used for colour coding.

Please note, colours are for guidance only.

Size Weight Order Code Price/1each KEN-735 RND

1ltr 1.10kg -2100K 351.105ltr 5.40kg -2200K 1099.20

Colour Size Weight Order Code Price/1each KEN-735 RNDTransparent

Blue 1ltr 1.1kg -0100K 542.205ltr 5.4kg -0200K 2249.90

Opaque

Yellow 1ltr 1.1kg -0700K 713.105ltr 5.4kg -0800K 1285.60

White 1ltr 1.1kg -1000K 713.105ltr 5.4kg -1100K 2570.701ltr 1.1kg -1300K 703.80Blue 5ltr 5.4kg -1400K 2187.30

new

new



METAL WORKING LUBRICANTSGROUP

740LUBRICANTS & CHEMICAL PRODUCTS

Soluble CuttingOil - Aluminium

So-Cool ‘Plus’ AluminiumSemi-synthetic, environmentally improved –does not contain sodium nitrite, phenols,triazene, PTBBA or chlorinated additives.Enhanced sump life and excellent anti-foamcharacteristics. Optimum tool life on the mostarduous jobs. Excellent corrosion protectionand lubrication to cutting areas, machinefixtures, slides etc. Low emulsion odour. Low drag out losses. Easily removed in splashareas. Resists the formation of aluminiumsoaps - Improves filtration and machinecleanliness. Recommended concentrations:General machining 7% or (a dilution of 14 to1). Heavy duty machining 10% or (a dilution of10 to 1).Supplied in 20ltr stacking poly container or a 205ltr barrel.

Grade Size Order Code Price/1SOL-740 RND

SC-ALU 20ltr -4533B 2651.20

Soluble Grinding Oil - SyntheticSo-Cool ‘Plus’ Syn GrindingFully synthetic formulation. Long working lifetherefore economical. Minimises wheelglazing. Effective corrosion resistance. Stable emulsions in soft and hard water. Does not contain PTBBA.Recommended concentration for generalmachining operations:Grinding Cast Iron 2 % to 3.5% (dilution of 50 to 1 or 30 - 1).Steel and Ni/Cr steel 2% (dilution of 50 - 1).Supplied in 20ltr stacking poly container.


SC-GS 20ltr -4620B 2591.10

20LTR

Soluble Cutting Oil - StainlessSo-Cool ‘Plus’ Stainless Steel Environmentally improved - does NOT containphenols, boron, triazene, PTBBA orchlorinated additives. Based on highly refinedmineral oils. High degree of machine toollubrication. Ideal for a wide range ofmachining operations. Low odour. Low unitcost. Stable emulsions in very soft and veryhard water.Recommended concentrations:General machining 7% (dilution of 14 to 1).Heavy machining 10% (dilution of 10 to 1).Supplied in 20ltr stacking poly container or a 205ltr barrel.


SC-GP 20ltr -4508B 2009.00


SC-INOX 20ltr -4600B 2651.20

Soluble Cutting Oil Multi-PurposeSo-Cool ‘Plus’ GPEnvironmentally improved - does NOT contain phenols, boron, triazene, PTBBA orchlorinated additives. Based on highly refined mineral oils. High degree of machinetool lubrication. Ideal for a wide range ofmachining operations. Low odour. Low unitcost. Specially formulated for use in bothhard and soft waters.Recommended concentrations:General machining 7% (dilution of 14 to 1).Grinding (surface, cylindrical centreless) 2 - 3% (dilution of 50 to 1 or 33 to 1).Supplied in 20ltr stacking poly container or a205ltr barrel.

Soluble Cutting Oil - AerospaceSo-Cool ‘Plus’ AerospaceSpecifically designed for use in theaerospace industry on all highperformance alloys, Stainless steel, titaniumand aluminium alloys - in particular series7000 aluminium. Advantages/Benefits:Nitrite and chlorine-free. Secondary andtertiary amine-free formulation. Reduced riskof staining and corrosion. Long sump life.Emulsifiable residues to promote cleanworking environment.Does not containPTBBA.Approvals:AIRBUS ABR 9-0204.The military division of British Aerospace.Turkish Aerospace Industries (TAI).


SC-AERO 20ltr -4570B 2992.90


SC-CAST 20ltr -4563B 2801.50

Soluble Cutting Oil - Cast IronSo-Cool ‘Plus’ IronSemi-synthetic formulation. Excellent anti-foamcharacteristics. Environmentally improved -does NOT contain sodium nitrite, phenols orchlorinated additives. Excellent sump life andcorrosion protection. Superb tramp oil rejectioncharacteristics. Enhanced tool tip life. Low drag-out loss - highly cost effective in use.Based on highly refined mineral oil. Increased detergency.Recommended concentrations:General machining 5% or (a dilution of 20 to 1). Arduous operations/difficultmaterials 7% or (a dilution of 14 to 1). Grinding 3% or (a dilution of 33 to 1).Supplied in 20ltr stacking poly containeror a 205ltr barrel.


VG68 20ltr -4368B 1723.00

Slideway & General-Purpose Lubricant OilGrade VG68Excellent lubricating properties under high pressure workingconditions. Anti-wear additives. Lubricates and flows freely evenat very low temperatures. 20ltr stacking poly container or 205ltr

new

new



GROUP

740PROCESS & SYSTEM CLEANERS/GREASES

FT300

FT400

Product Removal Order Code Price/1Number Rate SOL-740 RNDFT300 3ltrs per hr -8860B 5117.60FT400 4ltrs per hr -8880D 12825.10

Product Order Code Price/1Number SOL-740 RNDPM175K -8940G 12897.50

Tramp Oil Belt SkimmersDesigned to effectively and simply remove tramp oil floating on thesurface of cutting fluid. Prevents the ‘Monday morning smell’, extendscoolant life and reduces the risk of dermatitis. Compact units fit tothe side or above the tank. 240V. Supplied with plug. Product FT400can be run continuously.Overall length: 440mm (from top of bracket to bottom of belt).Maximum insertion depth: 150mm.Case dimension (L x W x D): 80 x 80 x 502mm.Belt width: FT300 = 30mm; FT400 = 40mm.

Sump Emptier

With stainless steel Venturi pump. Screws into 205ltr oil drums. Usescompressed air to create a powerful vacuum. Empties liquid andsuspended solids from tanks and can fill a drum in as little as 90seconds, making it ready for appropriate disposal. Shuts off automatically when done.

Lithium Grease

So-Grease EP2High load lead-free lithium grease. Contains anti-rust additives to protect against corrosion. Anti-oxidants included to prolong product life. High ageing stability/high oxidation stability. Supplied in 400g, 5kg, 12.5kg or 50kgcontainers.

Pack Size Order Code Price/1Type SOL-740 RND

Cartridge 400g -5100K 67.60Tub 5.00kg -5105C 668.10Pail 12.5kg -5110M 1606.10

Product Order Code Price/1Number SOL-740 RNDSM9100 -9100K 3012.90

Water MixerWater and chemical mixing equipment system that is approved for useby the water regulation authority (WRA) to prevent the possibility of backflow. This is to safeguard against the possibility of chemicals findingtheir way into the mains water supply. Mixes water and chemicals tometered concentrations with approved air gap back flow preventionincorporated into the unit. Offers an economical way of blendingchemicals directly from the mains water system without the requirementfor any additional pipe-work, non-return valves or back flow preventionsystems.


new



FOOD SAFE OILS & GREASESGROUP

740LUBRICANTS & CHEMICAL PRODUCTS Food Safe

Penetrating OilFor dismantling, lubricatingand cleaning. This odourless oil istasteless and displaceswater leaving a hydrophobiccoating to protect surfacesfrom corrosion. It penetrates threads andcrevices to release andlubricate delicatemechanisms, pivot pointsand sliding surfaces whilstdegreasing hard surfaces.Can be used as a lightlubricant. FDA Compliant. INS H1registered. Food safe.Synthetic translucent.Tasteless water white fluid.Non-toxic. Anti-corrosive.

Food Safe Lubricating OilThis lubricant is completelyclear, odourless and food safe,it contains no mineralhydrocarbons and meets withFDA and is INS H1 registered.It is a hydrophobic oil andtherefore does not take inwater, providing a barrierbetween water condensationand metal surfaces. This versatile lubricant can beused on sliding and rollingelement bearing surfaces,metal, wood and plastics. Non-flammable. Non-toxic. Anti-corrosive. Safe for use attemperatures from -60° to +260°C.

Order Code Price/1Size SOL-740 RND

500ml -5930D 186.30


500ml -5960G 173.80

Order Code Price/1Size ACN-732 RND

425ml -0260K 158.20


FSASP 500g -6720B 301.70

Maintenance LiquidFood Grade

AC90-FGFood grade multi-purposemaintenance liquid industrialstrength lubricant and cleaner.Can be used safely in all foodprocessing locations whereboth incidental and direct foodcontact may occur. Essentialfor safe operations andmanufacturing forpharmaceutical, food andbeverage industries. Does not contain silicone andCFC. Tasteless andodourless. Holds NSF and InS approvalsfor use in food areas 3H andH1 grade.

Order Code Price/1Size ACN-732 RND

500ml -2260K 272.30

Food Grade Chain & DriveLubricantCD90-FG H1Holds H1 Food gradecertified by NSF #143540.3H & H1 incidental anddirect food contact InS 1795390. Water displacingproperties ideal for wetand damp conditions.Highly water resistant andrepellent. Anti-fling properties.Strong anti-rust capability. No added solvent. Silicone- and CFC-free.Temperature range -12°C to 200°C baseproduct.

Food Safe Belt DressingThis H1 registeredproduct is designed toextend life of leather,rubber and syntheticbelts. Cleanly applied fromthe 500ml aerosol, it improves grip and allowsthe belt to transmit fullpower without slippingeven in wet and dampenvironments.


500ml -6760F 145.60

Food Safe Anti-Seize Paste

Formulated for use on assemblies indifficult areas where fretting corrosionand corrosion induced by wetenvironments occur. It can also be useto lubricate slow moving slides and pivot pins. Resistant to hot, cold andsalt water it can be used across a widetemperature range where the solid lubricate including PTFE gives excellent dry lubricationand forms a barrier between all surfaces. Non-toxic, it complies with FDA regulationsand is H1 registered.

425ml

500ml

500ml

500g


500ml -6850E 182.60

Group 540

Food Safe White Grease Intended use for lubrication ofbearings, slides and all delicatemechanisms used in the foodmanufacturing/ processingindustry. Maximum operatingtemperature 150°C with excellent load carrying capacityand water resistance. Non-toxic. FDA Compliant. INS H1 registered.

Food Safe High Tech GreaseFully synthetic translucent non-melting grease that allowsfluid to penetrate intomachine parts before settingto a No. 2 rated grease.Protects and lubricates with anon-toxic anti-corrosive shield.Non-toxic lubricant ingredientslisted by the FDA regulationsand are INS H1 registered.Totally salt or fresh water-resistant to be used insideand out on machinery intemperatures ranging from40°C to +340°C.


500ml -6220C 209.40

500ml

500ml



FOOD SAFE OILS & GREASES/FOOD SAFE CLEANERSGROUP

740


Food Grade SiliconeRelease Agent

SP90-FG H1Superior silicone dry lubricant formulated toprovide extra performance and maximumsilicone release. Temperature range -65°C to +315°C. Holds H1 approval from NSF # 143541 and InS # 1795388. Odourless, tasteless,chemically inert.

Order Code Price/1Size ACN-732 RND500ml -9010K 231.10

500ml

Pack Order Code Price/PkQty SOL-930 RND175 -5500K 139.70

Probe WipesThese single use wipes are for the disinfectantcleaning of food probes to prevent cross-contamination. Tub of 175 (13 x 13cm) wipes.

Food Safe Wipes

Hand WipesThese non-toxic, single-use wipes areexcellent for killing lethal bacteria andpreventing cross-contamination.Size: 20 x 30cm.

Pack Order Code Price/PkQuantity SOL-930 RND200 -4400K 287.20

Synthetic Grease

Constructed using pure non-toxic syntheticbase oils, combined with PTFE and a complexmix of anti-oxidant and EP packages.Completely resistant to salt water and highhumidity environments. Dielectric and can beused to protect electrical equipment fromingress of water. Lubricates bearings, chainsand sliding surfaces including plasticbearings and runners. Has a widetemperature operating range -40°C to 340°C.Grease clean food safe lubricant. Non-melting.

Food Safe Silicone GreaseA versatile silicone grease for operation inextremes of high and low temperature. Can also be used on food pprtance as itoffers excellent physical performance and isINS H1 registered. Non-melting, waterrepellent, odourless, non-toxic, low volatility.High dielectric. resistant to oxidation.Thermally stable ozone resistant. Minimal effects on rubbers, plastics andmetals. Unaltered by UV light.

Order Code Price/1Size SOL-740 RND400ml -5900A 129.005.0kg -5905C 1278.90

Food Safe White GreaseIntended use for lubrication of bearings,slides and all delicate mechanisms used inthe food manufacturing/ processing industry.Maximum operating temperature 150°C withexcellent load carrying capacity and waterresistance. FDA Compliant. INS H1 registered. Non-toxic.

Order Code Price/1Size SOL-740 RND100ml -6250D 150.20400ml -6260E 307.80500g -6270F 392.30

Group540

Order Code Price/1Size SOL-740 RND100ml -6200A 75.00400ml -6210B 241.20


Lubricants & Chemical Products - Msele Trading 24 · LUBRICANTS & CHEMICAL PRODUCTS INDUSTRIAL...

Documents

Transcript of Lubricants & Chemical Products - Msele Trading 24 · LUBRICANTS & CHEMICAL PRODUCTS INDUSTRIAL...