Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering &...
-
Upload
elvin-todd -
Category
Documents
-
view
222 -
download
3
Transcript of Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering &...
![Page 1: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/1.jpg)
Mixing of Solids
By
Sidra Jabeen
Department of Chemical Engineering,
University of Engineering & Technology Lahore
![Page 2: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/2.jpg)
2
Intermingling of two or more separate
components to form more or less uniform
product.
Some other terms are
Agitation
Blending
Mixing
![Page 3: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/3.jpg)
3
MixingAgitation Blending
Mixing is the random distribution, into and through one another, of two or more initially separate phases.
Agitation refers to the induced motion of the material in a circulatory pattern in some type of container.
Blending is the mixing of two components to form a homogenous mixture. Sometimes, blending is the term used for mixing of liquids.
![Page 4: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/4.jpg)
4
Mixing of solids
Liquids – currents are
generated
Liquid – well-mixed
product
(homogeneous)
Solid – no such
currents so mixing is
done by other means
Solids – identifiable
phases
![Page 5: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/5.jpg)
5
Types of mixture
Perfect mixture / Solution
Segregated mixture / Suspension
Random mixture / Colloidal Dispersion
![Page 6: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/6.jpg)
6
Perfect mixture / Solution
Solutions are mixtures made by mixing a solute
and a solvent. The solute is the substance that
dissolves. The solvent is the substance that does
the dissolving. Solutions are homogeneous
![Page 7: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/7.jpg)
7
Suspension / Segregated mixture
Suspensions are heterogeneous mixtures of a solid
and a liquid in which the solid does not dissolve.
Particles of one component have a greater
probability of being found in greater amount in
one part of the mixture than the other.
![Page 8: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/8.jpg)
8
Random mixture / Colloidal Dispersion
Colloidal Dispersions are mixtures with
characteristics part way between a solution and a
suspension. Colloidal dispersions may appear
homogeneous but are actually heterogeneous.
![Page 9: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/9.jpg)
9
![Page 10: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/10.jpg)
10
Types of mixers
Mixing is by slow speed agitation of the mass with
an impeller
By tumbling
By Centrifuging smearing and impact
For cohesive solids – powerful and heavier
machines
For free flowing solids – light in construction
![Page 11: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/11.jpg)
11
Mixers for non cohesive solids
Mixer for dry and free flowing solids are
Light in construction
Moderate power consumption
![Page 12: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/12.jpg)
12
Appropriate contact
Mixing elements cannot generate flow currents
High viscosity
Mixing is by combination of low speed Shear Smearing Wiping Folding Stretching compressing
Mixer have
high power consumption
Cooling is required
Mixers for cohesive solids
![Page 13: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/13.jpg)
13
Different types of mixers are:
1. Change-Can mixer
2. Kneaders
3. Dispersers
4. Masticators
5. Continuous kneaders
6. Mixer extruders
7. Mixing rolls
8. Muller and pan mixers
9. Pug mills
Mixers for Cohesive solids
![Page 14: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/14.jpg)
14
1. Change-Can Mixers
For viscous liquids and light pastes as:
Food processing
Paint manufacturing
5 to 100 gal. in size
Change-Can mixer are:
1. Pony mixer
2. Beater mixer
![Page 15: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/15.jpg)
15
1. Pony mixers
Agitator consist of vertical blades held on rotating
head positioned near the wall of the can
Blades are slightly twisted
Agitator is mounted eccentrically
Can rest on a turn table driven in direction
opposite to that of agitator
All the material in the can is brought to the blade
to be mixed
When mixing is completed –blades are cleaned and
can is replaced
![Page 16: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/16.jpg)
Change Can Mixer (Pony Mixer)
![Page 17: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/17.jpg)
17
2. Beater mixers
Can or vessel is stationary
Agitator has a planetary motion
Visits all parts of vessel
Beaters are shaped to pass with close clearance
over the side & bottom of mixing vessel
![Page 18: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/18.jpg)
Change Can Mixer (Beater)
![Page 19: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/19.jpg)
19
Kneaders, Dispersers and Masticators
Kneading – “squashing the mass flat, folding it
over on itself and squashing it once more”
Also tear the mass apart and shear it between a
moving blade & a stationary surface.
For deformable & plastic solids
Large energy requirements
![Page 20: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/20.jpg)
20
Kneaders, Dispersers and Masticators
Mixing is done by two heavy blades on horizontal
shaft in a short trough with a saddle shaped
bottom
Blades turn towards each other at top, drawing
mass downward over the point of the saddle, then
shearing it between the blades and wall
They turn at different speeds usually 1.5 : 1 or 2 :
1
Mixing time – 5 to 20 min or longer then trough is
tilted for discharging or can be unloaded through
an opening
Cooling is provided commonly
![Page 21: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/21.jpg)
21
Banbury mixer
Heavy duty two-arm mixer
30 to 40 rpm
Solids enter from top and discharge from bottom
Applications: Compound rubber and plastic solids Masticate crude rubber Devulcanize rubber scrap Make water dispersion and rubber solution
Shorter time and small batches
Cooling is done by: Water spraying on walls Circulating through hollow agitator shaft
![Page 22: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/22.jpg)
Banbury Mixer
![Page 23: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/23.jpg)
Banbury Mixer
![Page 24: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/24.jpg)
24
Design of Blades
Sigma blade:
Used for general purpose kneading
Edges are serrated to give a shredding action
S-type Double-naben (fish-tail blade):
Effective with heavy plastic materials
develop high shear force
Z-type Disperser blade:
Heavier and develop high shearing forces
Disperse powders or liquids into rubbery masses.
![Page 25: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/25.jpg)
Kneader (Sigma Blades)
![Page 26: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/26.jpg)
Kneader (Sigma Blades)
![Page 27: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/27.jpg)
Double Naben Blades Z-type Disperser blade
![Page 28: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/28.jpg)
28
Continuous Kneaders
Continuous operation
deals light to fairly heavy materials (heavy, stiff, or
gummy materials)
consist of Single horizontal shaft Slow in motion Rows of teeth on shaft arranged in spiral
pattern Stationary teeth on the wall of casing Close clearance between dynamic and
stationary teeth
Shaft turns and also reciprocates in the axial
direction
Smearing action b/w teeth in axial or longitudinal
direction as well as radial shear
Several tons per hour
![Page 29: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/29.jpg)
29
![Page 30: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/30.jpg)
30
Mixer Extruders
The discharge of continuous kneader is restricted
by covering it with an extrusion die
Pitched blades of the rotor build up considerable
pressure in the material
Material is cut and folded and subjected to
additional shear
Contain one or two horizontal shafts, rotating but
not reciprocating , carrying blades set in a helical
pattern.
Pressure is built by reducing the pitch of helix or
by reducing the diameter of chamber or both
Continuously mix, compound, and work
thermoplastics, clays, and other hard-to-mix
materials.
Heating jacket is provided.
![Page 31: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/31.jpg)
Mixer Extruder
![Page 32: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/32.jpg)
32
Mixing Rolls
Smooth metal rolls at variable speeds
For pastes & deformable solids to intense shear
3 to 5 horizontal rolls in vertical stack
Material moves from slower to faster ones
Batch roll mills has two rolls set in horizontal
plane and require long mixing time and attention
Used for dispersing solids in rubber and plastic
materials
![Page 33: Mixing of Solids By Sidra Jabeen Department of Chemical Engineering, University of Engineering & Technology Lahore.](https://reader033.fdocuments.us/reader033/viewer/2022051315/56649d6f5503460f94a5124b/html5/thumbnails/33.jpg)
Mixing Rolls