Mini Network DVR User Manual_EN__REV1.2.0

8/12/2019 Mini Network DVR User Manual_EN__REV1.2.0

1/33

Digital Wireless Network P2P DVR

USERS MANUAL

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING YOUR SET.

RETAIN IT FOR FUTURE REFERENCE.

REV: 1.2.0


2/33

Caution

* Please read the following manual details before using.

* Pay attention to dampproof for the high resolution unit.* Don't scratch the LCD screen surface and clean the surface by soft cloth if the screen was dirty.

* This unit should be opened and serviced only by a qualified technician.

* Push the unit MIR switch if finding the picture reverse.

* Install the bottom side of the outer shell or inner side chamfer by customer's self-selection in

accordance with bedframe.

The lighting flash wit h arrowhead symbol within anequilateral triangle,

is intended to alert the user tothe presence of uninsulated

dangerous voltagewithin the products enclosure that may be of

sufficient magnitude to constitute risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

To prevent injury, this apparatus must be securely attached to the floor /wall in accordance

with the installation instructions.


3/33

1. Accessories

Open the box, check the package should contain the following accessories

Note: The above packing list is one network DVR with 2 Cameras , the packing list will different

according to the No. of cameras.

Network DVR 1 pcs

Camera 2 pcs

Quick Install Guide 1 pcs

CD 1 pcs

Power Adaptor(DVR) 1 pcs

Power Adaptor(Camera) 2 pcs

RJ45 cable 1 pcs

BracketCamera 2 pcs

Antenna 3 pcs

Supporting screws 3 pcs

Quick Install Guide CD Power Adaptor(DVR)

Power Adaptor(Camera) BracketCamera

Antenna RJ45 cableSupporting screws


4/33

CONTENTS

Caution..........................................................................................................................................2

Warning.........................................................................................................................................21. Accessories....................................................................................................................................3

2. Products.................................................................................................................................. ......5

2.1 Product appearanceCamera.........................5

2.2 Product appearanceNetwork DVR......................5

3. Specifications............................................................................................................................6~7

3.1 Camera................................................................6

3.2 Network DVR.................7

4. Installation............................................................................................................................... 8~10

4.1 Network DVR mounted..........................8

4.2 Camera mounted.....................84.3 Pairing Camera..................9~10

5. Network DVR operation and application .............................................................................10~20

5.1 Unregister Camera Setup...................10

5.2 Brightness Setup....................11

5.3 Date And Time Setup.....................12

5.4 TV Standard Setup.....................12

5.5 SD Card Overwrite Setup...12

5.6 Languaga Setup..........13

5.7 Motion Detect Setup..................13

5.8 System Update........14

5.9 Factory Reset.15

5.10 System information............... ..15

5.11 Camera Setup................... 15~16

5.12 Playback Settings...................16~18

5.13 Delete event records..................18~19

5.14 Real-time monitoring.19~20

6. Apple mobile phones and iPad client software use.......................21~25

6.1 Client software install................21

6.2 Add network DVR methods...................216.3 User operation................ 22~23

6.4 System settings............... 23~25

7. Android platform software usage method................ 26~27

8. PC software usage method............27~28

8.1 Software Install......27

8.2 Add network DVR methods...........27~29

8.3 Real-time monitoring...........28~30

8.4 DVR system parameter settings.......30~32

9. Statement..................32

10. Trouble Shooting................ 32~33


5/33

2. Products

2.1 Product appearanceCamera

2.2 Product appearanceNetwork DVR


6/33

3. Specifications

3.1 Camera

Camera

ITEMS Description

Image Sensor1/4 inch color CMOS OV7725

Sensor

Active pixels 640(H)480(V)

Horizontal Resolution 400TVL

Min illumination 0.1Lux/F=1.2 (0Lux LED On)

Focal Length 3.6mm ,6mm (optional)

Focus Type Fixed Focus

Optimal Focal Distance 58meters

Night Vision Yes

IR LED control Automatic (CDS Sensor)

Number of IR LEDs and Range 24PCS,up to 12meters

Frequency Range 2.4G ISM digital public band

Channel Frequencies AFH or TDMA

Maximum Wireless Range (Line of

Sight)100150meters

Optimum Wireless Range (Line of

Sight)50meters

User ID Random IDOutdoor use Yes

Waterproof IP55

Operating Temperature 0+40

Operating Humidity 85%

Storage temperature 10+50

Power Supply 100-240V50/60Hz 12V/500mA

Power consumption 5W max.

Dimensions110(W)150(H)105mm(D)(With

Stand)

Weight 0.4kg


7/33

3.2 Network DVR

Network DVR

ITEMS Description

Frequency Range 2.4G ISM digital public band

Channel Frequencies AFH or TDMA

Number of Cameras Supported 4CH

Transmission distance100150 meters Line of sight(barrier

free)

Recording format

H.264+PCM

Single640480@25fps

QUAD320240@12fps

Picture formatSingle:512384

QUAD:320240

Compression H.264

Multiple recording mode Single/Scan/QUAD

Start recording mode Manual/Motion detect

To detect start after recording time 15S

Automatic Overwrite when Full Optional

Maximum TF Card Size CLASS 6 32GB

Video Output Standard PAL/NTSC

Video output 1ch cvbs 1.0Vp-p 75

Adjustable Brightness Yes

Network communication mode P2P

Network InterfaceRJ45 10M/ 100M Ethernet Auto

Detect

Network protocol TCP/IP,DHCP,SMPT,HTTP,UPNP

Software updates Users to upgrade

Monitoring methodsSpecial software: PC, iOS, Android

customers end

Video playback Smartphone video playback

Multi-user access Up to 6

Security Secondary password access control

Power Supply 100-240V50/60Hz 5V/1.0A

Power consumption 5W max.

Operating Temperature 0+40

Operating Humidity 85%

Storage temperature 10+50

Dimensions 119(W)75(H)32mm(D)

Weight 0.2kg


8/33

4. installation

4.1 Network DVR mounted

Install the DVR on the bracket and locked, and connect the antenna to the DVR antennainterface,then connect the cable with the DVR and the Router separately, and turn on the DVR

power.

Before use the network DVR, please confirm the Router is open DHCP service( Generally speaking,

the router is open DHCP service automatically).

Note: This product is no PPPOE dial function, and can not connect with the Modem.

4.2 Camera mounted

Before install the cameras, please pair the camera with the DVR firstly, please reference for the pair

method. Install the paired camera on the camera bracket and locked the nuts, and install the cameras

on the wall or other safe places, and connect the DVR power.


9/33

Note:The camera position must be within the valid transfer distance to ensure the DVR can receive

the stable and clear photos from the cameras. Please pay attention to your safety in the outside

installation.

4.3 Pairing Camera

4.3.1 Connect the DVR and camera with the relative power adapter separately and turn on the

power supply.

4.3.2 Turn on the DVR power button, press the "Menu" key to enter the main menu, press ""

key to select "Camera" option, press the "Enter" key to enter, then press "" keys to select

"Register Camera submenu.

4.3.3 Press the "Enter" key to enter , and press the "" keys to select the camera need to be

paired. After press the "Enter" key. screen appears the "Register Camera1" character to

indicate whether to pair.

4.3.4 press "" key to select "Yes", the screen appears"Register Camera1",press Pairing

button on the back of the camera within 15 seconds for pair settings.


10/33

4.3.5 If pairing is successful, screen appears"Camera 1 registered"; If "operation Failed" appears on

the screen, it shows pairing fails, repeat the above operation again.

4.3.6 DVR can support up to four cameras.

5. Network DVR operation and application

5.1 Un-register Camera Setup


11/33

Choose the paired camera to be deleted in the Register Camera, press the "Enter" key and select

"Yes" , "Camera 1 unregistered" character appears on the screen, it means the deletion is completed ,

and the lock icon shows from closed to the open state.

5.2 Brightness Setup

Enter "Settings" main menu, select "Brightness" , the screen brightness can be adjusted as needed.

5.3 Date And Time Setup


12/33

Enter the "Settings" main menu, select "Date And Time", date and time can be adjusted according to

users local time.

5.4 TV Standard Setup

Enter the "Settings" main menu, select "TV Standard", the TV system can be adjusted as users

needed.

5.5 SD Card Overwrite Setup

Enter the "Settings" main menu, select " SD Card Overwrite ",Choose whether to open the SDCard Overwrite.


13/33

5.6 Language Setup

Enter the "Settings" main menu, select "Language", the language can be selected according to users

need.

5.7 Motion Detect Setup

Enter the "Settings" main menu, select "Motion Detection", motion detection sensitivity can set, the

user can choose according to the actual installation environment and the video requirement.

Enter the Motion Detection Actions , the user can select the motion detection recording mode

according to the needs.


14/33

Enter Motion Detection Alert ", the user can select the motion detection alarm sound according to

the needs.

5.8 System Update

Enter "Settings" main menu, select "System Update", network DVR can upgrade, but the network

DVR program files must be stored in the SD Card root directory in advance.

Select "Yes", "Update in process ....." appears on the screen, which means it is searching for the SD

Card program files for program updates; after about 30 seconds, "Update done, System will reboot

in 3 seconds"appears on the screen, which means that the program update is successful, the system

automatically restarts.


15/33

5.9 Factory Reset

Enter the "Settings" main menu, select "Factory Reset", which can make all settings of network

DVR back to the factory default state,. E.g: Use this function when you forgot your password or

need to re-set the parameters.

5.10 System information

Enter "Settings" main menu, select "System Information", the device information can be checked.

E.g: Device ID, Firmware, IP Address, SD Card status.

Note: When adding Network DVR, the Device ID can be checked here.

5.11 Camera Setup

Enter "Settings" main menu, select "Camera" , the user can set the camera items, according to the

needs.


16/33

Enter "Auto Scan" menu, camera channel automatically switching the time settings can be selected,

the default setting is "Never".

Warning: If Camera image need to be viewed through the network, the "Auto Scan" setting to

automatically switch state is prohibited. "Auto Scan" should set to "Never". And camera in the

QUAD screen, four channel Camera image can be viewed through the remote network.

Enter the "Anti-flicker" menu, camera anti-flicker setting function can be selected, the user can

adjust the Webcam frequency according to the local electricity frequency to adapt to the local

environment.

5.12 Playback Settings

Enter the "Folder" main menu, the video files can be viewed , the user can choose to view the video

or pictures according to needs.


17/33

Enter the "Movies" folder, Video sub-folder named as the date can be viewed, press "Enter" key,

concrete time period video file can be viewed , then press "Enter" key to play.

During video playback, press "Rec" button to enter the sequence playback mode, press "Rec" button

again to switch back to the selected video playback mode; press " " button to select the last

video or the next video.

Enter the "photos" folder, photo sub-folder named as the date can be viewed, press "Enter" key,

concrete time period photo file can be viewed , then press "Enter" key to preview.


18/33

During the preview, press "Rec" button to enter the sequence photo preview mode, press "Rec"

button again to switch back to the selected photo preview mode; press " " button to select the

last photo or the next photo.

5.13 Delete event records

Please insert the SD card into the network DVR card slot and format it when the SD card used for

the first time on the network DVR or delete the files in the SD card.

Enter "Folder" main menu, and select "SD FORMAT" to format, as shown above.

Warning: The data in the SD Card will be permanently deleted after formatted, please make a

backup for important data , please be careful when using this feature.


19/33

When entering the Folder" main menu to view the events, pressing "Rec" button can delete

portions of recorded events.

Please uninstall the SD card in the SD unmount "menu before remove the SD card from the

network DVR.

5.14 Real-time monitoring


20/33

Exit from the main menu and enter into the living monitoring mode, press "QUAD" button for

switching single screen to QUAD screen.

When in single image screen, press " " key to switch images between Camera1 to camera 4.big

image can be viewed.

When view Camera image, press "Rec" button for manual recording or motion detection recording.

Note: After reviewing network DVR, restore the image screen to the the QUAD state to ensure the

remote network end availability .

6.Apple mobile phones and iPad client software use

Apple mobile phones and iPad tablet PC in the following referred to are short as Apple phone.

Before use the software, open the phone WIFI function or 3G data services, to ensure that the Apple

phone can connect to the Internet normally.


21/33

6.1 Client software install

Use the Apple phone to search "Camera Live"Client Software in

the Apple App Store , users online install the software, as right pictures.

6.2 Add network DVR methods

6.2.1 After client software installation is completed,

return to the Apple phone desktop, and search client

software icon "Camera Live", as right pictures.

6.2.2 Click to run the client software to display the following interface

Add DVR methods (2 methods for choice)

6.2.2.1 Add Local area network DVR

Click to begin searching for Local area network DVR. Select the DVR, enter the password.

Click the "Save" added to the list.

6.2.2.2 Manually add the DVR

Click to add network DVRadding devices windows appears.

System nameUser-defined name, IPDVR

DIDis the DVR unique identification No.There is a series No. in the network DVR System

Informationor on the back of the label, please input it.

Passwordinitial password is 123456

Note: Please change your password after first use for safety.

Saveclick Save after finishing above.


22/33

6.3 User operation

6.3.1After add the network DVR successfully, click , image on network DVR

can be viewed.

6.3.2 Click the icon ,4- channel camera images can be viewed on the network DVR.

6.3.3 Full-screen display function: Start apple mobile phone to horizontal screen item and then put

it horizontally to get full-screen display function, then click the screen, the status bar is hidden.


23/33

6.3.4 Function declaration.

With icon: the network DVR has SD card, start or stop recording by manually click ;

Without icon: network DVR has not SD card;Icon flashes: Recording is doing;

Gray icon: Indicates the SD card is full.

Clicking it can capture the image at any time and save on the Apple phone.

If the network DVR connection is failed or image stoped, click it

Click it, any channel image among the four channels can be switched to view

6.4 System settings

6.4.1Enter into system settings

Press for 2 seconds, the below windows appear.

ViewView video

ModifyModify the device name and other parameters

MoreMore system parameter to setup

DeleteDelete the device

ClickMore, the below image appears for the

system parameter settings

Enter Admin PasswordAdministrator initial pass word is123456

After input the pass word, clickOKfor system parameter settings.


24/33

6.4.2 Pass word settings

Modify Preview passwordModify the user passwordModify the administrator passwordModify the administrator permission password

After finished setting, clickApplyto save.

Note: Please change the password, after first use for security.

6.4.3 Email Alert

Alert On/OffAlarm switch option

SMTP ServerE.g:smtp.live.com

SMTP PortPort

Use SSLChoose to use.

UsernameE-mail address

PasswordE-mail pass word

Email Tosend the message to pointed

E mail.

After finished setting, clickApplyto

save.

6.4.4 Event List


25/33

ChannelCamera channel selection.

Periodselect viewing time period.

FromSelect viewing starting time.

ToSelect viewing ending time.

ClickLoad, start to check the event list, click the video file to play

6.4.5 Format Storage

ClickFormat Storageon the Apple phone to format, it takes about one minute.

Warning: The data in the SD Card will be permanently deleted after formatted, please make a

backup for important data , please be careful when using this feature.

6.4.6 Set Date&Time

Users can select the time zone according to the

local time, After finished setting, clickApply

to save.


26/33

7. Android platform software usage method

Android mobile phones and Android tablet PC in the following referred to are short as Android

phone. Before use the software, open the phone WIFI function or 3G data services, to ensure that

the Android phone can connect to the Internet normally.

7.1 Client software install

Use the Android phone to search "Camera Live Eric Xu"Client

Software in the Google play , users online install the software,

as right pictures.

7.2 Add network DVR methods7.2.1 After client software installation is completed, return to the

Android phone desktop, and search client software icon

"Camera Live", as right pictures.

7.2.2 Click and operate the client software, the below windows appear.

Add DVR methods (2 methods for choice)









27/33




Saveclick Save after finishing above.

Android client software sequent operation settings are similar with the Apple phone operation,please reference to 6.3 --6.4 items.

8.PC client software usage method

8.1 software install

Search the program file on DC, double-click to open and install it to PC

system.

8.2 Add network DVR method

8.2.1After client software installation is completed, return to the

PC desktop, and search client software icon

"Camera Live", as shown in right.

8.2.2 Click and operate the client software, the below windows appear.


28/33

Add DVR methods (Two methods for you to choose)











SaveAfter finished, click Save

After clickSaveAdd camera to list successfully! appears, it means adding is successful..

Right-click area, user can view the image on the network DVR.

8.2.3 Icons indicate

Language / Photo Storage Settings Capture images

Live real-time monitoring PTZ control

DVR History Video View Full Screen Preview

DVR system parameter settings Single Preview

Manually add the DVR Quad Preview


29/33

Find Local area network DVR Nine split preview

Connection Refresh

8.3 Real-time monitoring

Select an image to be displayed on the right channel region, right-click , the

View selection is appeared, click confirm and enter into the DVR image channel selection.

Select the channel need to be checked and add it to the display area.


30/33

Realtime monitoring preview can be switched between signal screen, Quad screen and 9-channel

screen.

8.4 DVR system parameter settings8.4.1 Image storage path settings

Click the left top corner image , Select Settings and enter image storage path settings.

8.4.2 Language settings

Click the left top corner image ,select Language and enter into language settings.


31/33

8.4.3 DVR History Video View and Delete

Click , the password window appears, password confirmed and enter into DVR History

video playback.

Double click the left event list and playback the selected video file.

Click Selection window appears after the event list , right-click the event list to select the

file to be deleted.


32/33

8.4.4 DVR remote settings

Click , password window will appear, after the password is correct, then enter into the

DVR remote settings.

The PC customer software DVR remote setting is similar as 6.4, please reference for it.

9.StatementThe specification and information in the user manual is just for reference. If the content is update,

special notice will not given ,unless there are special conventions.All statements, information in this

manual does not constitute any warranty.

If the version of the client software upgrade, some features may be different from this manual,

please kindly note special notice will not given. Thanks for your cooperation.

10. Trouble Shooting

10.1 Devices are not pairing1. Check the camera and DVR is correctly connected with the power adapter and the power supply

is turned on.

2. Check the camera and DVR are pairing within 10 meters , after pairing is successful, then install

the camera.

10.2 No images on the LCD

1. Check the camera and DVR is correctly connected with the power adapter and the power supply

is turned on.

2. Confirm LCD DVR status indicator is green or not, the green shows screen is turned on; red

shows screen is turned off.


33/33

3. Make sure there is nothing obstructing the view of the camera.

4. Make sure the camera is within the limited transmission distance.

5. Try re-pair the camera and DVR

10.3 Network can not connect or "failed

1. Confirm DVR network indicator light is on.

2.Check DVR is properly connected.(Note:This product is no PPPOE dial function,can not connect

directly to the modem)

3. Make sure the router is turned on DHCP service.

4. Make sure ID number or password is filled correctly.

5. Make sure the router worked normally.

10.4 Network connect successfully, but without images

1. Make sure the camera under this channel of DVR has image(remarks:The 4-channel image canbe remotely viewed when DVR is in QUAD status.)

2. Make sure the DVR and camera pairing successfully.

3. Make sure the camera is within the limited transmission distance.

4. Make sure the network is ok, the network speed is not less than 128kbps.

5. Confirm the intelligent terminal CPU speed is not less than 800MHz, the early Android devices

can not reach this speed.

10.5 Wrong password can not be accessed

1. Check password is correct or not.

2. Select Restore factory settings in the network DVR menu, the system will be restored to the

factory default status.

Mini Network DVR User Manual_EN__REV1.2.0

Documents

Transcript of Mini Network DVR User Manual_EN__REV1.2.0