Milling, Drilling and GrindingSpindles from PRECISE

Available tool chucks

Worldwide serviceAlong with the three brands of the FISCHER Spindle Group – FISCHER AG Präzisionsspindeln, PRECISE Technologies GmbH and FISCHER Engineering Solu-tions AG – the FISCHER Spindle Group also includes established service companies in other key markets.

In addition to customer support during start-up and in the design of machining processes as well as a wide range of services and training seminars, these com-panies provide reputable repair services in accordance with the manufacturer‘s specifications.

PRECISE Technologies GmbH | Hans-Böckler-Strasse 17 | 40764 Langenfeld | Germany phone: +49 2173 20535 0 | fax: +49 2173 20535 99 | info-pt@fischerspindle.com | www.fischerspindle.com

Hollow taper shank (HSK), automatic tool change

Precision colletmanual tool change

Grinding arbor Taper shank, automatic tool change

Direct shank chuck, automatic tool change

Cooling system

Supply lines

Lubrication unit Frequency converter

Peripheral equipmentFor a spindle to operate perfectly, it takes not only the right design configuration, but also the right peripheral equipment (frequency converter, choke, lubrication system, hydraulics and cooling system). That equip-ment must be matched exactly to the spindle used and to the application.

Achieving optimal spindle performance demands technical know-how – and you will find that specialized expertise at PRECISE Technologies GmbH. We will be glad to assist you in the selection of suitable peripheral equipment.

Milling, drilling and grinding – spindles from PRECISEPRECISE Technologies GmbH develops and markets spindle systems for precision machining in the optical in-dustry, in dental and medical technology, in micromachi-ning, in the aircraft industry, and in tool and die making. Our spindles are characterized above all by their reliabi-lity, precision and balanced price-performance ratio.

Our experienced development department will work together with you to engineer practical solutions for your machinery concept. The following is an overview of the basic products of our PERFORMANCE LINE.

Spindle type Motor type Outer diameterD [mm]

Nominal speedn max/rpm

Power S1P [kW]

Torque S1M [Nm]

Motor frequency[Hz]

Lubrication system

Cooling LengthL [mm]

Weight[kg]

Manual / precision collet

SC1060-0A

asynchronous 60/61,92 160.000 0,5 0,04 2.667 oil air liquid 211 2,5

SC3060

asynchronous 60/61,91 60.000 1,2 0,2 1.000 grease liquid 260 3,5

SC4060

asynchronous 60/61,91 50.000 1,2 0,29 834 grease liquid 275 4,5

Manual / HSK-C

AG62-50-0,3-M-HC25

asynchronous 61,91 50.000 1,2 0,29 834 grease liquid 270 5

SC4084-M/HSK-C25

asynchronous 80 50.000 3,4 0,8 1.667 grease liquid 307 10

SD4084-M/HSK-C25

synchronous 80 50.000 6 1,5 1.667 grease liquid 307 10

SD5084-M/HSK-C32

synchronous 80 25.000 7 4 833 grease liquid 300 10

Automatic / direct shank

SC2063

asynchronous 60/61,91 80.000 1,0 0,125 1.333 grease liquid 266 4,8

SC3163-3

asynchronous 60/61,91 60.000 1,2 0,2 1.000 grease liquid 281 4

SD3263

synchronous 61,91 60.000 1 0,24 1000 grease liquid 272 4

Product range

Two lines for different requirements

Technically high-quality solutions with a high degree of innovation and customer-specific modifications » 60-100 mm Ø » Interfaces: HSK E20-E32, taper shank, direct shank,

grinding arbor

Cost-efficient solution with a high degree of standardization » 33-62 mm Ø » Interface: direct shank

PRECISE strives to offer products perfectly tailored to the specific needs of its customers. Since those needs vary no less than the applications themselves in which our spindles are used, our product portfolio covers a very broad range.

Working together with you, we will determine which spindle from which line best fits your individual requirements.

(*)

Spindle type Motor type Outer diameterD [mm]

Nominal speedn max/rpm

Power S1P [kW]

Torque S1M [Nm]

Motor frequency[Hz]

Lubrication system

Cooling LengthL [mm]

Weight[kg]

Automatic / taper shank

SC3162/SK10

asynchronous 61/61,91 60.000 1,2 0,2 1.000 grease liquid 297 4,5

Automatic / hollow taper shank (HSK)

SC4064/HSK-E25

asynchronous 60/61,91 50.000 1,2 0,29 834 grease liquid 356 7,5

SD4064/HSK-E25

synchronous 60/61,91 50.000 2,3 0,55 834 grease liquid 356 7,5

AG60-65-0,2-P-HE20

asynchronous 60 65.000 1,2 0,19 1083 grease liquid 289 4,5

SG60-65-0,3-P-HE20

synchronous 60 65.000 2 0,3 1083 grease liquid 289 4,5

SC4084/HSK-E25

asynchronous 80 50.000 3,4 0,8 1.667 grease liquid 375 11,2

SC4084-D/HSK-E25 (*)

asynchronous 80 50.000 3,4 0,8 1.667 grease liquid 404 11,2

SD4084/HSK-E25

synchronous 80 50.000 6 1,5 1.667 grease liquid 375 11,2

SD4084-D /HSK-E25 (*)

synchronous 80 50.000 6 1,5 1.667 grease liquid 405 11,2

(*) For further information, feel free to also request our SMART LINE brochure.

(*) With convection cooling

Typical markets » Aerospace » Automotive » Clock making » Electronics » Medical » Dental » Optical

Spindle type Motor type Outer diameterD [mm]

Nominal speedn max/rpm

Power S1P [kW]

Torque S1M [Nm]

Motor frequency[Hz]

Lubrication system

Cooling LengthL [mm]

Weight[kg]

SD5084/HSK-E32

synchronous 80 25.000 7 4 833 grease liquid 410 11,2

SD5084-D /HSK-E32 (*)

synchronous 80 25.000 7 4 833 grease liquid 443 12,5

AG100-45-0.8-P-HE25

asynchronous 100 45.000 2,1 0,8 1.500 grease liquid 245 7

AG100-45-1.4-P-HE25

asynchronous 100 45.000 3,5 1,4 1.500 grease liquid 245 7

AG100-32-3.5-P-HF40

asynchronous 100 32.000 9 3,5 1.067 grease liquid 428 16

SG100-45-2-P-HE25

synchronous 100 45.000 6,3 2 1.500 grease liquid 245 7,6

AG100-32-2.0-P-HE32

asynchronous 100 32.000 6,3 2 1.067 grease liquid 428 16

AG100-40-2.0-P-HE32

asynchronous 100 40.000 6,3 2 1.333 grease liquid 412 13,8

AG100-32-3.5-P-HE32

asynchronous 100 32.000 9 3,5 1.067 grease liquid 428 16

(*) With convection cooling