Micro Piles Soil Nails
Transcript of Micro Piles Soil Nails
YOUR PARTNERS WITH SOLUTIONS
Do you have these types of projects?
Retaining Walls
Excavation for Basements
Infrastructure Excavation
No Room for Caisson Placement
Added Support for Grade Beams or Footings
We Have The Solutions
CON-TECH Systems
CTS/TITAN IBO
• Soil Anchors
• Micropiles
• Soil Nails
IINJECTION-NJECTION-BOBORED MICRO PILESRED MICRO PILES
CTS/TITAN IBO SystemCTS/TITAN IBO System
Hollow Bar with external thread.
The Drill BitDrill Bit selected to meet soil conditions has Venturi grout exit holes.
Optional CentralizerCentralizer centers the bar inside the bore hole.
The CouplerCoupler connects the hollow bars.
Self locking Thread (Pitch < 6°).
Special Approved Fine-Grain Steel
The hollow bar:The hollow bar:
CTS/TITAN IBO
Bearing Plate
HDPE tube for free length
or additional corrosion
protection in the area of
Soil quality and friction
Sphencal collar nut
Soil cement grout body
Final injection grout
CTS/TITAN hollow bar thread deformations to ASTM-A 615 to limit Cracks widths in grout
CTS/TITAN hollow bar, allows grout injection boring
Coupler
Circular spacer to achieve grout cover >3/4” allows grout passage
Drill Bit
Flushing holes or jets
Cross-section of exhumened grout bodyCross-section of exhumened grout body
Densified Ground
Soil / Cement Mix
Neat Cement Grout
Hollow TITAN Bar
• Equipment, Material & Installation Specification• For Self-Drilling Dynamic Grouted• TITAN Soil-Nails and Micro-Piles
• 1.0 Scope
• TITAN Hollow Bars are 3 meters long (IBO)
• Continuously threaded, can be cut at any length
• TITAN thread conforms to the requirements of reinforcing steel and exceeds the requirements of
• ASTM A-615 GRADE 75
Specifications:Specifications:
Many Applications Anchor Soil Nail Pile Rock Bolt
Drill BitsDrill Bits
Clay Bit:
Carbide Bit:
Button Bit:
Carbide Step Bit
Carbide Button Bit
Cross Cut Bit:
Clay, sand-mixed Ground without Boulders < 50 S.P.T
For controlled directional drilling (tolerance < 2% of the length)
Dolomit, Granite, Sandstone; strength 70-150 MPa
Weathered Rock, Phylit, Slate, Shale; strength < 70 MPa
Reinforced Concrete or Rock, strength > 70 MPa
Dense Sand with Gravel and small Boulders > 50 S.P.T
System-PartsSystem-Parts
Drill Bit
Hollow Titan Bar
Centralizer
Coupling
Bearing Plate
Hex Nut
Pipe Sleeve
• Adaptable to any load situation
• Short installation time• Small equipment for
installation• For tension and compression
or combined loads
Advantages of simultaneously drilled and grouted TITAN anchor piles:
Soil Nail
Titan IBO Soil Nails
• The making of the wall. • Nailed and cased, (right) • Shotcrete stabilized, (below).
Micro-Piles
Footers or grade beams
Anchors for transmission towers
Guy Wire Anchors
Guy Wire Anchors
Drill mounted on bob cat
Hollow core drill shaft with rock bit
Instructions on the drills remote controls
Drilling with air
YOUR PARTNERS WITH SOLUTIONS
• TITAN INJECTION-BORED MICOR PILES & SOIL NAILS
• RAM JACK HELICAL AND HYDRAULIC PIERS
• HJ3 CARBON FIBER WRAPS
• PREASURE GROUTING
• MUDJACKING
• NEGATIVE SIDE CONCRETE WATERPROOFING
• CONCRETE REPAIR AND RESTORATION
Arizona Ram Jack, LLCArizona Ram Jack, LLC
Questions?
Arizona Repair Masons, Inc.