PROMET SA 2 Our Products Roofing nails Common nails Screw shank nails Ring shank nails Plastic...
-
Upload
francis-davidson -
Category
Documents
-
view
232 -
download
2
Transcript of PROMET SA 2 Our Products Roofing nails Common nails Screw shank nails Ring shank nails Plastic...
PROMET SA
2
Our Products• Roofing nails• Common nails• Screw shank nails• Ring shank nails• Plastic collated smooth shank
nails and ring shank nails• Certificated epal nails
Coating: 3 methods
Thermo diffusion Zinc Coating
Hot Dip Zinc CoatingElectrogalvanizing
Thermo Ddiffusion Zinc Coating
We have started also apply Thermo Diffussion
Zinc Coating.
Features:• High corrosion resistance - Up to 1000 hours in a salt
mist chamber, excellent for marine applications. • Environmental friendly - Dry process, chromate free, and
does not contain toxic elements and fully ecologically clean. • No pre-treatment required - oily, greasy and 40% rusty
surfaces can be coated with no pre-treatment. • Working temperature - 450oC • Passivity - provides excellent free-air conservation, with
non-toxic materials. • Strong adhesive coating - no peeling or cracking. • High abrasion resistance - micro-hardness up to 1636
HV, prevents nut seizure in stainless steel bolts. • Uniform coating - even on tubes and internal surfaces. • Thickness of coating - 15-120µ, 50% under surface and
50% over surface layer. • No Zinc build-up - no grinding of excess zinc. • Low diffusion temperature - 360-450oC • Steel annealing could be part of galvanizing process for
extra saving. • Excellent base for paint or rubber bonding - no
profiling, high spots removal, roughening or primer required.
Hot Dip Zinc Coating Our nails are submitted hot dip
zinc coating, which is good technique against steel
corrosion. Zinc coated elements do not corrode for approximately 50 years while paint coating lasts
maximum 10 years.
Roofing nails
Type*
30x4030x2530x30
* We could also produce nails of various dimensions on the special order
Common nailsType*
25x6028x65 - 7030x70-9035x70-9040x100 -
11545x12550x15060x180
70x200 - 300* We could also produce nails of various dimensions on the special order
Screw shank nails
Type*28x50 –
6028x70 -
8031x50 –
6031x70-8033x50 –
6033x70-9040x100-
120
* We could also produce nails of various dimensions on the special order
Pallet nailsType*
RING SHANK34x7034x9029x40
SMOOTH SHANK28x5525x55
25x55 S
* We could also produce nails of various dimensions on the special order
Ring Shank NailsType*
25x50-7028x60 – 80
30x4030x50-6030x70-90
35x70 – 9038x70-90
40x100 – 11545x125
•We could also produce nails of various dimensions on the special order
Plastic collated smooth shank nails and ring shank
nailsType*
28x5028x6028x6528x7028x7528x8031x6031x7031x8031x90
31x100•We could also produce nails of various dimensions
on the special order
Nails are connected at an angle of 17° and 21°
Contact:PROMET SA
1 Maja Street 1227-200 Starachowice
Poland
Localization in Starachowice
Phone:Telephon number: 0048/(0)41 273 70 51
Fax: 0048/(0) 41 273 57 75www.prometsa.com.pl
E - mail
THANK YOU