MFC-J3930DW / MFC-J6930DW / MFC-J6935DW Quick Setup Guide · Follow the Touchscreen instructions to...
2
NOTE • Most of the illustrations in this Quick Setup Guide show the MFC-J6930DW. • Save all packing materials and the box in case for any reason you must ship your machine. • You must purchase the correct interface cable for the interface you want to use. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long. Ethernet (Network) cable Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 2 Load plain A4 paper For loading other sizes of paper, see Paper Handling in the Reference Guide. 1 Unpack the machine and check the components The components included in the box may differ depending on your country. Pull the paper tray completely out of the machine as shown by the arrow. Fan the paper well. Connect the telephone line cord. Use the socket marked LINE and guide the cord out the back of the machine. Lift the scanner cover. Close the scanner cover. Follow the Touchscreen instructions to unpack and install the ink cartridges. The machine will prepare the ink tube system for printing. When the machine has finished the initial cleaning process, follow the Touchscreen instructions to configure the machine’s settings. • Check print quality • Configure the tray settings • View operation tips • Set Brother LCD Message defaults • Print the installation sheet Open the ink cartridge cover, and then remove the orange protective part from the machine. After turning the machine on, you may need to set your country or language (depending on your machine). If required, follow the Touchscreen instructions. Load the paper in the tray. Connect the power cord. The machine will power on automatically. Adjust the paper guides. Do not exceed this mark (bbb). NOTE If you are sharing one telephone line with an external telephone, connect it as shown below. NOTE You can adjust the control panel angle to read the Touchscreen more easily. NOTE Follow the Touchscreen instructions to store the orange protective part inside the machine. If you must transport the machine, remove the ink cartridges and replace this part. Pull out the paper support until it locks into place. Slowly push the paper tray completely into the machine. a. Extension telephone b. External telephone Quick Setup Guide MFC-J3930DW / MFC-J6930DW / MFC-J6935DW Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. 3 Connect the power cord 6 Install the inbox ink cartridges 4 Select your country or language (Initial setup only) 7 Machine settings D00DJN001-00 UK Version 0 (for UK) (for others) Inbox Ink Cartridges • Black • Yellow • Cyan • Magenta Quick Setup Guide Reference Guide Product Safety Guide Brother Installation Disc Telephone Line Cord Maintenance Sheet Power Cord 1. Press [Settings] > [All Settings] > [Initial Setup] > [Local Language]. 2. Press your language. 3. Press . 8 Select your language (if needed and only for certain models) 9 Connect the telephone line cord If you are not using your machine as a fax, go to 10 . The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals Watch our FAQ videos for help with setting up your Brother machine. solutions.brother.com/videos 5 Set the date and time Follow the Touchscreen instructions to set the date and time. Quickly shake just the black ink cartridge horizontally 15 times as shown, before inserting it into the machine. (Example for UK) (Example for UK) 1 2
Transcript of MFC-J3930DW / MFC-J6930DW / MFC-J6935DW Quick Setup Guide · Follow the Touchscreen instructions to...
NOTE• MostoftheillustrationsinthisQuickSetupGuideshowthe
MFC-J6930DW.• Saveallpackingmaterialsandtheboxincaseforanyreasonyoumustshipyourmachine.
• You must purchase the correct interface cable for the interface you want to use.
USB cableWerecommendusingaUSB2.0cable(TypeA/B)thatisnomorethan2metreslong.
Ethernet (Network) cableUseastraight-throughCategory5(orgreater)twisted-paircablefor10BASE-Tor100BASE-TXFastEthernetNetwork.
2 Load plain A4 paperForloadingothersizesofpaper,seePaper HandlingintheReference Guide.
1 Unpack the machine and check the componentsThecomponentsincludedintheboxmaydifferdependingonyourcountry.
Pullthepapertraycompletelyoutofthemachineasshownbythearrow. Fanthepaperwell.
Connectthetelephonelinecord.UsethesocketmarkedLINEandguidethecordoutthebackofthemachine.
Liftthescannercover. Closethescannercover.
FollowtheTouchscreeninstructionstounpackandinstalltheinkcartridges.Themachinewillpreparetheinktubesystemforprinting.
Whenthemachinehasfinishedtheinitialcleaningprocess,followtheTouchscreeninstructionstoconfigurethemachine’ssettings.•Checkprintquality•Configurethetraysettings•Viewoperationtips•SetBrotherLCDMessagedefaults•Printtheinstallationsheet
Opentheinkcartridgecover,andthenremovetheorangeprotectivepartfromthemachine.
Afterturningthemachineon,youmayneedtosetyourcountryorlanguage(dependingonyourmachine).Ifrequired,followtheTouchscreeninstructions.
Loadthepaperinthetray.
Connectthepowercord.Themachinewillpoweronautomatically.
Adjustthepaperguides.
Donotexceedthismark(bbb).
NOTEIfyouaresharingonetelephonelinewithanexternaltelephone,connectitasshownbelow.
NOTEYoucanadjustthecontrolpanelangletoreadtheTouchscreenmoreeasily.
NOTEFollowtheTouchscreeninstructionstostoretheorangeprotectivepartinsidethemachine.Ifyoumusttransportthemachine,removetheinkcartridgesandreplacethispart.
Pulloutthepapersupportuntilitlocksintoplace.
Slowlypushthepapertraycompletelyintothemachine.
a. Extensiontelephoneb. Externaltelephone
QuickSetupGuideMFC-J3930DW / MFC-J6930DW / MFC-J6935DW
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guideforthecorrectinstallationprocedure.
3 Connect the power cord
6 Install the inbox ink cartridges
4 Select your country or language (Initial setup only)
7 Machine settings
D00DJN001-00UKVersion0
(for UK) (for others)
Inbox Ink Cartridges•Black•Yellow•Cyan•Magenta
Quick Setup GuideReference Guide
Product Safety Guide
Brother Installation Disc
Telephone Line Cord
Maintenance Sheet Power Cord
1. Press [Settings]>[All Settings]>[Initial Setup]>[Local Language].
2. Pressyourlanguage.
3. Press .
8 Select your language (if needed and only for certain models)
9 Connect the telephone line cordIfyouarenotusingyourmachineasafax,goto 10 .
ThelatestmanualsareavailableattheBrotherSolutionsCenter:solutions.brother.com/manuals
WatchourFAQvideosforhelpwithsettingupyourBrothermachine.solutions.brother.com/videos
5 Set the date and time
FollowtheTouchscreeninstructionstosetthedateandtime.
Quicklyshakejusttheblackinkcartridgehorizontally15timesasshown,beforeinsertingitintothemachine.
(Example for UK)
(Example for UK)
1
2
©2016BrotherIndustries,Ltd.Allrightsreserved.ForFAQs,Troubleshooting,andtodownloadsoftwareandmanuals,visitsupport.brother.com.
10 Select a device to connect to your machine
11 Connect your computer
12 Alternative wireless setup
13 Print or scan using your mobile device
D00DJN001-00
PuttheinstallationdiscintoyourCD/DVDdrive,ordownloadtheFullDriver&SoftwarePackageat:
ForWindows®:solutions.brother.com/windowsForMacintosh:solutions.brother.com/mac
Ifyouareusingarecentlyreleasedoperatingsystemonyourcomputer,visittheabovewebsitesforupdateddriverandsoftwareinformation.
Follow the on-screen instructions and prompts.
ForWindows®:IftheBrotherscreendoesnotappearautomatically,gotoComputer(My Computer/This PC).Double-clicktheCD/DVD-ROMicon,andthendouble-clickstart.exe.
ForMacintosh:Forfulldriverfunctionality,werecommendchoosingtheCUPS driverwhenaddingaprinter.
Ifyoucannotfindthisinformation,askyournetworkadministratororwirelessaccesspoint/routermanufacturer.
Ifsetupisnotsuccessful,restartyourBrothermachineandyourwirelessaccesspoint/router,andrepeat 12
FindyourSSID(NetworkName)andNetworkKey(Password)onyourwirelessaccesspoint/routerandwritetheminthetableprovidedbelow.
SelecttheSSID(NetworkName)foryouraccesspoint/routerandentertheNetworkKey(Password).
Whenthewirelesssetupissuccessful,theTouchscreendisplays[Connected].
Goto 11 toinstallsoftware.
Goto 13 toinstallapps.
SSID (Network Name)
Network Key (Password)
Computer Mobile Device
Goto 11 andfollowtheinstructions. Goto 12 andfollowtheinstructions.
For Computer
For Mobile Device
Can’t Connect? Check the following:
Brotherregularlyupdatesfirmwaretoaddfeaturesandapplybugfixes.Tocheckforthelatestfirmware,visitsolutions.brother.com/up2.
Evenifyoudonothaveawirelessaccesspoint/router,youcanconnectyourdeviceandyourmachinedirectly.Foradditionalwirelessnetworksupport,gotosolutions.brother.com/wireless-support.
BrotherSupportCenterisamobileappthatprovidesthelatestsupportinformationforyourBrotherproduct.VisittheAppStoreorGooglePlay™todownload.
Wirelessnetwork
Wirednetwork
USBconnection
Restartyourwirelessaccesspoint/router(ifpossible). Ifstillnotsuccessful,goto 12
Disconnectthecable. Ifstillnotsuccessful,visitsupport.brother.comforFAQsandTroubleshooting.
Restartyourmachineandcomputer,andthengoto 11
Gotoyourmachine,andpress >[Setup Wizard]>[Yes].
Downloadandinstallourfreeapplication“Brother iPrint&Scan”fromamobileapplicationstore,suchastheAppStore,GooglePlay™orWindowsPhone®Storeusingyourmobiledevice.
AdditionalWirelessSupport:solutions.brother.com/wireless-support
Download
Optional appsYoucanprintfromandscantoyourmobiledeviceusingvariousapps.Forinstructions,seetheOnline User’s Guide.
SSID:XXXXXXXNetworkkey:XXXX
Finished
Finished
NOTEYourmobiledeviceandmachinemustbeconnectedtothesamewirelessnetwork.
