MEYER G AGE - AIT Tools · Diameter GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGO Range Assembly...

MEYER GAGE2009 CATALOG

Phone: 800-243-7087 Fax: 860-528-1428Website: www.meyergage.com

ISO 9001CERTIFIED

GET A GRIP!New Meyer Plug Gage Handles. No bushings!

One handle covers an entire set of pins.

Light Weight Aluminum Handles

AMUST ACCESSORY FOR GAGE SET OWNERSModel Number 1PGHDERange .0110” - .0605” or .28mm - 1.51mm$15.49

Model Number 2PGHDERange .0610” - .2505” or 1.52mm - 7.71mm$16.59





Model Number 7PGHDERange .8330” - 1.015” or 20.38mm - 25.41mm$30.99

Model Number 8PGHDEBundle Deal. Buy all 7 handles$130.99

NEW

Table of ContentsDescription page

inDiViDUaL cLass Z pins - engLisH & Metric ............................................................. 4

inDiViDUaL cLass X pins - engLisH & Metric ............................................................. 5

inDiViDUaL cLass XX pins - engLisH & Metric ............................................................. 5

go/ngo asseMBLies - engLisH ................ 6

go/ngo asseMBLies - Metric .................. 7

gage HanDLes & BUsHings ...................... 8

gage storage accessories ..................... 9

cLass Z engLisH gage sets .................... 10

cLass Z engLisH LiBrarY series ........... 11

cLass Z Metric gage sets ....................... 12

cLass Z Metric LiBrarY series ............. 13

cLass X engLisH gage sets .................... 14

cLass X engLisH LiBrarY series ........... 15

Mg-25 series cLass X tentH sets .......... 16

cUstoM LengtH cLass ZZ gages ........ 17

cUstoM LengtH cLass X gages ........... 18

taperLocK stYLe gages ........................... 19

triLocK stYLe gages ................................. 20

ring gages cHroMe .................................. 21

ring gages steeL & carBiDe .................. 22

progressiVe stYLe gages ....................... 23

Master setting Disc ................................. 24

HeX gages ....................................................... 25

tHreaD MeasUring wires ...................... 26

taperLocK steeL tHreaD pLUg gages ................................................27-29

3

taperLocK Hss tHreaD pLUg gages tin coateD ...................................................... 30

triLocK reVersiBLe steeL tHreaD pLUg gages ..................................................... 31

HeLicaL coiL taperLocK steeL gages (sti) ....................................................... 32

reVersiBLe steeL tHreaD pLUg gages ..................................................... 33

tHreaD ring gages – engLisH ........34-35

trUncateD tHreaD setting pLUgs ..........................................36-37

steeL taperLocK Metric tHreaD pLUg gages ..................................................... 38

reVersiBLe steeL Metric tHreaD pLUgs .............................................. 39

tHreaD ring gages – Metric ............... 40

tHreaD setting pLUgs – Metric ......... 41

taper pipe gages - npt .............................. 42

taper pipe gages-nptF .............................. 43

gear MeasUring wires .......................44-45

3-wire tHreaD MeasUring sYsteM ..........................................................46-47

FLeXiBLe HoLe Location gages .......... 48

caLiBration ................................................... 49

gage Fact sHeet (anD toLerance cHart) ..................................... 50

taBLe oF tHreaD pitcH DiaMeter LiMits ......................................51-52

pLUg gage Use & toLerance seLection ........................................................ 53

MetroLogY eqUipMent ........................... 54

corporate Message ................................iBc

Description page

.005 to .0105 $6.18

.011 to .0605 2.81

.061 to .5005 2.50

.501 to .6255 3.44

.626 to .7505 4.99

.751 to .8325 7.49

.833 to .9165 8.58

.917 to 1.0005 8.88

English IndividualClassZGagePins*Replace missing pins! Donʼt live with broken sets. We stock these replacement pins in even half thousand sizes forimmediate shipment. All pins over .060” are laser marked with size and direction of tolerance. But we donʼt stopthere, weʼve also added a serial number lasered onto each piece for traceability.

*IMPORTANT: Specify PLUS or MINUS whenordering individual members.* Size increments available in .0005”

Replace missing pins! Donʼt live with broken sets. We stock these replacement pins in all sizes for immedi-ate shipment. All pins over 1.51mm are laser marked with size and direction of tolerance. But we donʼt stopthere, weʼve also added a serial number lasered on to each piece for traceability.

.22 to 1.51 $3.441.52 to 12.71 3.1312.72 to 15.31 3.9415.32 to 17.81 6.1817.82 to 20.37 7.4320.38 to 22.05 8.6822.06 to 23.73 9.7523.74 to 25.41 10.97

*IMPORTANT: Specify PLUS or MINUS whenordering individual members.* Size increments available in .01mm

What's the �� about Laser Marking?Our computer based, non-contact, thermal process produces a permanent medical grade mark on our gages. Through computermonitoring the mark is carefully controlled to give consistentmaterialpenetration. This method gives superior quality control com-pared to other marking systems and traceability by serial number. All pins over .060” are marked with size and direction of tolerance.

4

IMPROVED

IMPROVED Metric IndividualClassZGagePins*

CLASSX IndividualGagePins*

.0110 to .07599” $14.40

.0760 to .50099” 11.64

.5010 to .74999” 16.54

.7500 to 1.0000” 20.51

These pins have the same features as our Class Z pins but with a .00004 tolerance limit and a .00002 roundness limit. They aregreat for your inspection needs or when you want to maximize your GO/NOGO tolerance limit. Theyʼre also a great way to cali-brate measuring equipment, micrometers and calipers. We make all sizes for your special needs. All pins over .060” or 1.51 mmare laser marked with size and direction of tolerance. Weʼve also added a serial number lasered onto each piece for traceability.

English

Metric.28 to 1.90mm $14.401.91 to 12.70mm 11.6412.71 to 19.02mm 16.5419.03 to 25.40mm 20.51

*Please Specify PLUS or MINUS.Also Available CLASS X BILATERAL (split tolerance)add 25% to above prices.

CLASSXX IndividualGagePins*

.0110 to .07599” $28.79

.0760 to .50099” 23.28

.5010 to .74999” 33.07

.7500 to 1.0000” 41.03

When an even tighter tolerance is needed, Meyer Gage now makes XX pin gages. With a tolerance of .00002 and a roundnesslimit of .00001, itʼs our tightest tolerance yet for your most critical inspection needs. Theyʼre our best gages to calibrate yourmeasuring equipment, micrometers and calipers. All pins over .060” or 1.51mm are laser marked with size and direction of toler-ance. Weʼve also added the serial number for traceability.

English

Metric.28 to 1.90mm $28.791.91 to 12.70mm 23.2812.71 to 19.02mm 33.0719.03 to 25.40mm 41.03

*Please Specify PLUS or MINUSAlso Available CLASS XX BILATERAL (split tolerance)add 25% to above prices.

5

6

ENGLISH GO/NOGO GAGESClass XX GO

Class Z Class Z GO Class X Class X GO Class XX AssemblyDiameter GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGORange Assembly Assembly Assembly Assembly Assembly Assembly

0.0110" to 0.0755" $15.61 $10.30 $40.85 $22.59 $81.70 $45.160.0760" to 0.1805" 15.47 9.96 35.54 19.93 71.07 39.850.1810" to 0.2815" 16.61 10.96 35.87 20.26 71.73 40.510.2820" to 0.4065" 16.94 11.30 36.86 20.92 73.73 41.850.4070" to 0.5005" 19.60 13.62 39.52 22.59 79.04 45.160.5010" to 0.5105" 21.26 13.95 50.14 27.90 100.33 55.790.5110" to 0.6255" 25.90 17.28 54.79 31.88 109.58 63.760.6260" to 0.6355" 29.42 19.27 54.79 31.88 109.58 63.760.6360" to 0.7505" 31.09 20.59 56.46 33.22 112.92 66.420.7510" to 0.7605" 36.40 23.25 65.09 37.53 130.17 75.040.7610" to 0.8325" 44.50 29.89 72.33 43.51 144.64 87.010.8330" to 0.9165" 45.83 31.22 72.33 43.51 144.64 87.010.9170" to 1.0005" 46.82 32.55 72.33 43.51 144.64 87.01

One complete GO/NOGO gage includes: one Plus member (GO), one Minus member (NOGO), one Double End Handle with Bushings assembled.GO gage includes: one Plus member with Single End Handle and Bushing assembled.NOGO gage includes: one Minus member with Single End Handle and Bushing assembled.GO/NOGO gages are available with special diameter or length gages, prices on request.Gage Handles marked with size and direction of tolerance. *Additional markings $0.20 per character.

EnglishGO/NOGOGageAssemblies

Use these GO/NOGOassemblies for in-processinspection on the shop floor.Detect out of tolerancesbefore your customer does.Available in English Class Z,Class X and Class XX.

7

MetricGO/NOGOGageAssemblies

One complete GO/NOGO gage includes: one Plus member (GO), one Minus member (NOGO), one Double End Handle with Bushings assembled.GO gage includes: one Plus member with Single End Handle and Bushing assembled.NOGO gage includes: one Minus member with Single End Handle and Bushing assembled.GO/NOGO gages are available with special diameter or length gages, prices on request.Gage Handles marked with size and direction of tolerance. *Additional markings $0.20 per character.

METRIC GO/NOGO GAGESClass Z GO Class XX GO

Diameter Class Z Assembly Class X Class X GO Class XX AssemblyRange GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGO(mm) Assembly Assembly Assembly Assembly Assembly Assembly

0.22 to 1.90 $16.94 $10.63 $40.85 $22.59 $81.70 $45.161.91 to 4.56 16.94 10.63 35.54 19.93 71.07 39.854.57 to 7.14 17.25 10.96 35.87 20.26 71.73 40.517.15 to 10.32 18.27 11.63 36.86 20.92 73.73 41.8510.33 to 12.70 20.92 13.29 39.52 22.59 79.04 45.1612.71 to 12.96 22.65 14.15 50.14 27.90 100.30 55.7912.97 to 15.30 27.31 18.14 54.79 31.88 109.58 63.7615.31 to 16.12 32.08 20.52 54.79 31.88 109.58 63.7616.13 to 19.30 36.40 21.85 56.46 33.22 112.92 66.4219.31 to 20.36 43.64 29.16 65.32 37.56 130.17 75.1220.37 to 22.04 46.29 30.49 72.33 43.51 144.64 87.0122.05 to 23.72 48.95 31.81 72.33 43.51 144.64 87.0123.73 to 25.41 51.60 33.15 72.33 43.51 144.64 87.01

Use the GO/NOGO assemblies forin-process inspection on the shopfloor. Detect out of tolerancesbefore your customer does.Available in Metric Class Z,Class X and Class XX.

8

Bushings

Gage HandlesPlug Gage Double End Single EndDiameter (mm) Handle # Price Handle # Price

.005"-.075" (.13 -1.91) 1 W D.E. $4.98 1 W S.E. $4.66

.076"-.180" (1.93- 4.57) 2 W D.E. 5.65 2 W S.E. 4.98

.181"-.281" (4.60-7.14) 3 W D.E. 5.98 3 W S.E. 5.32

.282"-.406" (7.15 -10.32) 4 W D.E. 6.97 4 W S.E. 5.98

.407"-.510" (10.33 -12.96) 5 W D.E. 9.63 5 W S.E. 7.64

.511"-.635" (12.97-16.12) 6 W D.E. 12.29 6 W S.E. 10.63

.636"-.760" (16.13-19.30) 7 W D.E. 13.95 7 W S.E. 11.96

.761"-1.010" (19.31-25.65) 8 W D.E. 21.20 8 W S.E. 17.94

1W010 thru 5W510....................$2.33 each6W532 thru 8W1.00...................$3.33 eachMATERIAL1W thru 5W..........................................................BRASS6W thru 8W...................................................ALUMINUM

English Wire type, Cylindrical Gage BushingsRange

Bushing # Above Thru1W010 .005 .0101W015 .010 .0151W020 .015 .0201W025 .020 .0251W030 .025 .0301W035 .030 .0351W040 .035 .0401W045 .040 .0451W050 .045 .0501W055 .050 .0551W060 .055 .0601W065 .060 .0651W070 .065 .0701W075 .070 .0752W082 .075 .0822W089 .082 .0892W096 .089 .0962W103 .096 .1032W110 .103 .1102W117 .110 .1172W124 .117 .1242W131 .124 .1312W138 .131 .1382W145 .138 .1452W152 .145 .1522W159 .152 .1592W166 .159 .1662W173 .166 .173

RangeBushing # Above Thru2W180 .173 .1803W188 .180 .1883W196 .188 .1963W204 .196 .2043W212 .204 .2123W220 .212 .2203W228 .220 .2283W236 .228 .2363W244 .236 .2443W252 .244 .2523W261 .252 .2613W271 .261 .2713W281 .271 .2814W291 .281 .2914W301 .291 .3014W311 .301 .3114W321 .311 .3214W331 .321 .3314W341 .331 .3414W351 .341 .3514W361 .351 .3614W371 .361 .3714W382 .371 .3824W394 .382 .3944W406 .394 .4065W420 .406 .4205W435 .420 .4355W450 .435 .450

RangeBushing # Above Thru5W465 .450 .4655W480 .465 .4805W495 .480 .4955W510 .495 .5106W532 .510 .5326W547 .532 .5476W563 .547 .5636W579 .563 .5796W594 .579 .5946W610 .594 .6106W625 .610 .6256W635 .625 .6357W656 .635 .6567W672 .656 .6727W688 .672 .6887W704 .688 .7047W719 .704 .7197W735 .719 .7357W750 .735 .7507W760 .750 .7608W781 .760 .7818W812 .781 .8128W843 .812 .8438W875 .843 .8758W906 .875 .9068W937 .906 .9378W968 .937 .9688W1.000 .968 1.010

GageAccessories

Handles furnishedwithout bushings. Bushings sold separately.CustomEngraving available at $0.20 per character.

*New style universal handle available. See inside front cover of this catalog.

9

Durable PolyCases Poly InsertsGageStorageAccessories

Poly Case for M-O Set.................................................$15.00 eachPoly Case for M-1 thru M-8 Set...................................$30.00 eachPoly Case and insert for M-O Set............................... $30.00 eachPoly Case with insert for M-1 thru M-8 sets................ $60.00 eachEach hole size marked on insert.

Poly Insert for M-0 set...........................$15.00 eachPoly Insert for M-1 thru M-8 sets..........$30.00 eachEach hole size marked on insert.

Upgrade Existing SetsModel Number Wt./Lbs PriceL-E4 38 four drawer cabinet, empty $297.75L-IN4 46 four drawer cabinet with four inserts of your choice 365.17

HeavyDutyMetalStorageCabinets

EnglishGage SetsMeyer GageClass Z Pin SetsWe started making the originalZZ back in 1965 and our com-petition has tried, but canʼtcopy the quality of theseaffordable pin gage sets. Wenow have taken the extra stepfor the better pin gage, ClassZ. Introducing the MEYER Z.A closer tolerance (.0001),more accurate and better foryour needs. (See top rightcorner of page for details.) Wehave done it again. Weʼvemade a better pin gage thatno other has attempted withthe same great features listedbelow.

Gage Set No. Gage - Size Pieces Wt./Lbs. PriceFEATURES:MORE FEATURES THANGAGES COSTING TWICETHE PRICE. All gages and sets are

traceable to N.I.S.T. Boxes and gages both

marked Size and serial number

laser etched on eachpiece (M-O not etched)

Material: 52100Bearing Steel

No sharp edges All members 2” longUSES: Checking locations Measuring hole sizes

and depth GO & NO/GO gaging Setting micrometers Checking distances

between holesFinish: Centerless lapped Each gage is inspected

and has a 8 microfinishor better

Heat treated to a hard -ness of 60-62 Rockwell C

All English gages with.0001” limit

M0M - minus 0.0110" to 0.0600" 50 1 $72.14M0P - plus 0.0110" to 0.0600" 50 1 72.14M05M - minus 0.0115" to 0.0605" 50 1 72.14M05P - plus 0.0115" to 0.0605" 50 1 72.14C10M - minus 0.0110" to 0.2500" 240 8 222.42C10P - plus 0.0110" to 0.2500" 240 8 222.42C105M - minus 0.0115" to 0.2505" 240 8 222.42C105P - plus 0.0115" to 0.2505" 240 8 222.42M1M - minus 0.0610" to 0.2500" 190 8 162.31M1P - plus 0.0610" to 0.2500" 190 8 162.31M15M - minus 0.0615" to 0.2505" 190 8 162.31M15P - plus 0.0615" to 0.2505" 190 8 162.31M2M - minus 0.2510" to 0.5000" 250 23 240.45M2P - plus 0.2510" to 0.5000" 250 23 240.45M25M - minus 0.2515" to 0.5005" 250 23 240.45M25P - plus 0.2515" to 0.5005" 250 23 240.45M3M - minus 0.5010" to 0.6250" 125 24 282.54M3P - plus 0.5010" to 0.6250" 125 24 282.54M35M - minus 0.5015" to 0.6255" 125 24 282.54M35P - plus 0.5015" to 0.6255" 125 24 282.54M4M - minus 0.6260" to 0.7500" 125 33 312.59M4P - plus 0.6260" to 0.7500" 125 33 312.59M45M - minus 0.6265" to 0.7505" 125 33 312.59M45P - plus 0.6265" to 0.7505" 125 33 312.59M5M - minus 0.7510" to 0.8320" 82 29 530.91M5P - plus 0.7510" to 0.8320" 82 29 530.91M55M - minus 0.7515" to 0.8325" 82 29 530.91M55P - plus 0.7515" to 0.8325" 82 29 530.91M6M - minus 0.8330" to 0.9160" 84 35 619.38M6P - plus 0.8330" to 0.9160" 84 35 619.38M65M - minus 0.8335" to 0.9165" 84 35 619.38M65P - plus 0.8335" to 0.9165" 84 35 619.38M7M - minus 0.9170" to 1.0000" 84 41 648.88M7P - plus 0.9170" to 1.0000" 84 41 648.88M75M - minus 0.9175" to 1.0005" 84 41 648.88M75P - plus 0.9175" to 1.0005" 84 41 648.88

IMPROVED

Here is a comparison of the Class ZZ and theClass Z gage pin specifications.OLD NEWClass ZZ Class ZSize deviation .0002” Size deviation .0001”Roundness geometry .0001” Roundness geometry .00005”Surface finish 10 micro Surface finish 8 microThe Meyer Gage Class Z gage pin will meet or exceed therequirements of Class ZZ, and can replace the Class ZZ inany situation or application.

10

English Library Series.0001 CLASS Z LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members PriceLC - minus 120 0.011" to 0.750" (740 gages) $1,242.71LC - plus 120 0.011" to 0.750" (740 gages) 1,242.71L1 - minus 120 0.061" to 0.750" (690 gages) 1,186.53L1 - plus 120 0.061" to 0.750" (690 gages) 1,186.53L2C - minus 96 0.011" to 0.501" (980 gages in .0005" increments) 1,119.11L2C - plus 96 0.011" to 0.501" (980 gages in .0005" increments) 1,119.11L2 - minus 95 0.061" to 0.501" (880 gages in .0005" increments) 1,006.75L2 - plus 95 0.061" to 0.501" (880 gages in .0005" increments) 1,006.75L3 - minus 240 0.061" to 1.000" (940 gages) 3,024.74L3 - plus 240 0.061" to 1.000" (940 gages) 3,024.74L4 - minus 241 0.011" to 1.000" (990 gages) 3,080.92L4 - plus 241 0.011" to 1.000" (990 gages) 3,080.92L5 - minus 140 0.751" to 1.000" (250 gages) 1,978.66L5 - plus 140 0.751" to 1.000" (250 gages) 1,978.66** Consists of two four-drawer cabinetsUpgrade Existing SetsModel Number Wt./Lbs PriceL-E4 38 four drawer cabinet, empty $297.75L-IN4 46 four drawer cabinet with four inserts of your choice 365.17

11

MetricGage Sets

M0MMM - minus .22 to 1.50 65 1 $93.78M0MMP - plus .22 to 1.50 65 1 93.78M01MMM - minus .23 to 1.51 65 1 93.78M01MMP - plus .23 to 1.51 65 1 93.78M1MMM - minus 1.52 to 7.70 310 10 330.62M1MMP - plus 1.52 to 7.70 310 10 330.62M11MMM - minus 1.53 to 7.71 310 10 330.62M11MMP - plus 1.53 to 7.71 310 10 330.62M2MMM - minus 7.72 to 12.70 250 25 355.87M2MMP - plus 7.72 to 12.70 250 25 355.87M21MMM - minus 7.73 to 12.71 250 25 355.87M21MMP - plus 7.73 to 12.71 250 25 355.87M3MMM - minus 12.72 to 15.30 130 24 394.35M3MMP - plus 12.72 to 15.30 130 24 394.35M31MMM - minus 12.73 to 15.31 130 24 394.35M31MMP - plus 12.73 to 15.31 130 24 394.35M4MMM - minus 15.32 to 17.80 125 30 418.39M4MMP - plus 15.32 to 17.80 125 30 418.39M41MMM - minus 15.33 to 17.81 125 30 418.39M41MMP - plus 15.33 to 17.81 125 30 418.39M5MMM - minus 17.82 to 20.36 128 38 496.69M5MMP - plus 17.82 to 20.36 128 38 496.69M51MMM - minus 17.83 to 20.37 128 38 496.69M51MMP - plus 17.83 to 20.37 128 38 496.69M6MMM - minus 20.38 to 22.04 84 32 594.61M6MMP - plus 20.38 to 22.04 84 32 594.61M61MMM - minus 20.39 to 22.05 84 32 594.61M61MMP - plus 20.39 to 22.05 84 32 594.61M7MMM - minus 22.06 to 23.72 84 37 686.64M7MMP - plus 22.06 to 23.72 84 37 686.64M71MMM - minus 22.07 to 23.73 84 37 686.64M71MMP - plus 22.07 to 23.73 84 37 686.64M8MMM - minus 23.74 to 25.40 84 41 705.51M8MMP - plus 23.74 to 25.40 84 41 705.51M81MMM - minus 23.75 to 25.41 84 41 705.51M81MMP - plus 23.75 to 25.41 84 41 705.51

Just look at this selection ofMetric gage pin sets. If we donʼtmake it you probably donʼt needit! These sets have all the fea-tures of our English sets, butprovide the finer increments insize that you just canʼt get byconverting English to Metric.

FEATURES:MORE FEATURES THANGAGES COSTING TWICETHE PRICE.

All gages and sets aretraceable to N.I.S.T.

Boxes and gages bothmarked

Size and serial numberlaser etched on eachpiece (M-O not etched)


No sharp edges 51mm overall length All sets in .02mm

increments

USES: Checking locations Measuring hole sizes


between holes

Finish: Centerless lapped Each gage is inspected

and has a 8 micro-finish or better


All metric gages with.0025mm tolerance limit

Gage Set No. Gage - Size Pieces Wt./Lbs. Price

Meyer GageClass Z Pin Sets

Class Z

IMPROVED

12

Metric Library Series.0025 METRIC LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members PriceL-10mm - minus 124 1.52mm to 17.80mm (815 gages) $1,655.07L-10mm - plus 124 1.52mm to 17.80mm (815 gages) 1,655.07L-11mm - minus 124 1.53mm to 17.81mm (815 gages) 1,655.07L-11mm - plus 124 1.53mm to 17.81mm (815 gages) 1,655.07L-20mm - minus 183 17.82mm to 25.40mm (380 gages) 2,619.12L-20mm - plus 183 17.82mm to 25.40mm (380 gages) 2,619.12L-21mm - minus 183 17.83mm to 25.41mm (380 gages) 2,619.12L-21mm - plus 183 17.83mm to 25.41mm (380 gages) 2,619.12L-30mm - minus** 305 1.52mm to 25.40mm (1195 gages) 4,274.18L-30mm - plus** 305 1.52mm to 25.40mm (1195 gages) 4,274.18L-31mm - minus** 305 1.53mm to 25.41mm (1195 gages) 4,274.18L-31mm - plus** 305 1.53mm to 25.41mm (1195 gages) 4,274.18** Consists of 2 four drawer cabinets


*IMPORTANT: Specify PLUS or MINUS when ordering individual members.

13

Class XGage Sets

Offers the same “features” asour Class Z pin gages but with.00004” tolerance limit and.00002” roundness limit.These pins are perfect forcritical inspection needs orwhen you want to maximizeyour GO/NOGO tolerancelimits. They're also a greatway to calibrate measuringequipment, micrometersand calipers.

Gage Set No. Gage - Size Pieces Wt./Lbs. PriceFEATURES: All gages and sets are

traceable to N.I.S.T. Boxes and gages both

marked Size and serial number

laser etched on eachpiece (M-OX not etched)


No sharp edges All members 2” long

USES: Checking locations Measuring hole sizes


between holes

Finish: Centerless lapped Each gage is inspected

and has a 2 microfinishor better


All English gages with.00004” limit

M0XM - minus .011 to .060 50 1 $396.44M0XP - plus .011 to .060 50 1 396.44M05XM - minus .0115 to .0605 50 1 396.44M05XP - plus .0115 to .0605 50 1 396.44M1XM - minus .061 to .250 190 7 1041.77M1XP - plus .061 to .250 190 7 1041.77M15XM - minus .0615 to .2505 190 7 1041.77M15XP - plus .0615 to .2505 190 7 1041.77C10XM - minus .011 to .250 240 7 1378.00C10XP - plus .011 to .250 240 7 1378.00C105XM - minus .0115 to .2505 240 7 1378.00C105XP - plus .0115 to .2505 240 7 1378.00M2XM - minus .251 to .500 250 23 1378.00M2XP - plus .251 to .500 250 23 1378.00M25XM - minus .2515 to .5005 250 23 1378.00M25XP - plus .2515 to .5005 250 23 1378.00M3XM - minus .501 to .625 125 24 1170.24M3XP - plus .501 to .625 125 24 1170.24M35XM - minus .5015 to .6255 125 24 1170.24M35XP - plus .5015 to .6255 125 24 1170.24M4XM - minus .626 to .750 125 33 1240.20M4XP - plus .626 to .750 125 33 1240.20M45XM - minus .6265 to .7505 125 33 1240.20M45XP - plus .6265 to .7505 125 33 1240.20M5XM - minus .751 to .832 82 29 1041.98M5XP - plus .751 to .832 82 29 1041.98M55XM - minus .7515 to .8325 82 29 1041.98M55XP - plus .7515 to .8325 82 29 1041.98M6XM - minus .833 to .916 84 35 1097.10M6XP - plus .833 to .916 84 35 1097.10M65XM - minus .8335 to .9165 84 35 1097.10M65XP - plus .8335 to .9165 84 35 1097.10M7XM - minus .917 to 1.000 84 41 1258.22M7XP - plus .917 to 1.000 84 41 1258.22M75XM - minus .9175 to 1.0005 84 41 1258.22M75XP - plus .9175 to 1.0005 84 41 1258.22

100% Inspectedfor ACCURACY!

14


.00004” CLASS X LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members PriceL-CX - minus 120 .011” to .750” (740 gages) $5,166.44L-CX - plus 120 .011” to .750” (740 gages) 5,166.44L-1X - minus 120 .061” to .750” (690 gages) 4,791.20L-1X - plus 120 .061” to .750” (690 gages) 4,791.20L-2X - minus 95 .061" to .5005” (880 gages in .0005” increments) 4,709.58L-2X - plus 95 .061” to .5005” (880 gages in .0005” increments) 4,709.58L-2CX - minus 96 .011” to .5005” (980 gages in .0005” increments) 5,384.80L-2CX - plus 96 .011” to .5005” (980 gages in .0005” increments) 5,384.80L-3X** - minus 240 .061” to 1.000” (940 gages) 8,094.16L-3X** - plus 240 .061” to 1.000” (940 gages) 8,094.16L-4X** - minus 240 .011” to 1.000” (990 gages) 8,414.28L-4X** - plus 240 .011” to 1.000” (990 gages) 8,414.28** Consists of two four-drawer cabinets

CLASSXLibrary Series

15

GAGE SET NO. NOMINAL SIZE RANGE SET PRICEEnglish or Metric

MG1-25 .0110" to .0609" 0.28mm to 1.54mm $240.79MG2-25 .0610" to .2509" 1.55mm to 6.37mm 119.79MG3-25 .2510" to .5009" 6.38mm to 12.72mm 138.10MG4-25 .5010" to .7499" 12.73mm to 19.04mm 190.58MG5-25 .7500" to .8129" 19.05mm to 20.64mm 266.82

To order, simply select your nominal size from any .0001” English or .01mmMetric increment and direction of tolerance.Then refer to the above chart to find the set price.

Telephone 860 528 6526 or 1 800 243 7087 FAX 860 528 1428www.meyergage.com

ClassXMG-25 SeriesMG-25 PINGAGESETSin .0001” increments or .01mm increments.

Used as masters to calibrate measuringequipment and check linearity of comparators,micrometers, and calipers. These “Tenth Step”gage sets have unlimited applications, such asquality control inspection, prototype work andproduction layout. Inspectors select from therange of pins to find the size of a hole or slot.These round masters simulate a cylindrical part which, unlike flat blocks,can detect uneven wear on the tips of micrometers and calipers. The thin“line” of contact detects uneven face wear better than flat gageblocks with large contact area.

Features: Each set contains 25 pieces of Class X tolerance (.00004”) gage pins. Traceable to NIST. Choice of two tolerances: Plus (+.00004”) or Minus (-.00004”) Sets consist of a center nominal size, and 12 gages larger in .0001” steps and 12 gages smaller in .0001”

steps. Each gage is inspected and has a 2 microfinish or better. Heat treated and through hardened to 60-62 Rockwell C All pin gages over .060” or 1.51mm are laser marked with size direction of tolerance and serial number for

traceability.

As little as

$4.79per

gagein set

s

16

No guarantee of straightness due to Centerless Grinding process on these products. Class ZZ custom length gages are not returnablefor credit or cancellation.

ClassZZGages

Reversible pin gages up to 12”lengths. These are invaluablewhen you need to gage deepor hard to reach holes or slots. Centerless ground to a 10

microfinish or better Made from HSS Steel Plus, Minus or Bilateral

tolerance NIST Traceable Stabilized and heat treated

to 62-64RC

CustomLength

Diameter Range 2.5” 3” 4” 5” 6” 9” 12”0.0110” to 0.0629" 0.279mm to 1.575mm $40.72 $41.80 $42.63 $44.53 $46.91 $48.81 $70.850.0630” to 0.1879” 1.576mm to 4.750mm 40.60 40.72 40.85 42.27 44.29 47.75 71.910.1880” to 0.2509” 4.751mm to 6.350mm 41.20 41.56 41.43 42.63 44.90 50.73 73.950.2510” to o.3129” 6.351mm to 7.925mm 42.86 42.99 43.23 43.34 45.13 53.47 77.150.3130” to 0.3759” 7.926mm to 9.525mm 44.42 44.53 44.66 44.77 47.75 58.35 84.430.3760” to 0.4389” 9.526mm to 11.125mm 50.73 50.97 51.08 51.20 51.32 62.04 90.620.4390” to 0.5009” 11.126mm to 12.700mm 48.94 57.15 57.15 55.25 50.97 66.68 94.910.5010” to 0.5319” 12.701mm to 13.487mm 50.61 56.68 56.68 58.58 53.47 65.73 93.360.5320” to 0.5639” 13.488mm to 14.300mm 51.44 57.99 57.99 60.25 55.25 68.47 96.440.5640” to 0.5949” 14.301mm to15.088mm 52.28 59.29 59.29 61.92 56.92 70.97 100.860.5950” to 0.6259” 15.089mm to 15.875mm 53.11 60.72 60.72 63.59 58.58 73.83 104.190.6260” to 0.6569” 15.876mm to 16.662mm 54.05 62.76 62.76 65.61 65.61 77.87 109.060.6570” to 0.6879” 16.663mm to 17.450mm 54.89 64.19 64.19 67.16 67.16 80.62 113.360.6880” to 0.7189” 17.451mm to 18.237mm 56.20 65.73 65.73 69.66 69.66 83.72 117.880.7190” to 0.7509” 18.238mm to 19.050mm 56.81 66.92 66.92 70.97 70.97 86.21 119.540.7510” to 0.7819” 19.051mm to 19.837mm 57.99 68.00 68.00 73.24 73.24 88.35 122.410.7820” t0 0.8129” 19.838mm to 20.625mm 59.19 69.43 69.43 75.61 75.61 91.10 126.920.8130” to 0.8439” 20.626mm to 21.412mm 59.90 70.61 70.61 77.15 77.15 93.59 130.860.8440” to 0.8759” 21.413mm to 22.225mm 60.96 72.40 72.40 79.42 79.42 97.05 134.430.8760” to 0.9069” 22.226mm to 23.012mm 61.80 74.06 74.06 80.97 80.97 100.38 141.100.9070” to 0.9379” 23.013mm to 23.800mm 62.99 75.61 75.61 83.23 83.23 103.59 144.910.9380” to 0.9689” 23.801mm to 24.587mm 64.06 77.15 77.15 85.38 85.38 106.69 149.680.9690” to 1.0009" 24.588mm to 25.400mm 65.49 79.30 79.30 88.23 88.23 111.10 155.39

17

No guarantee of straightness due to Centerless Grinding process on these products. Class X custom length gages are not returnablefor credit or cancellation.

Class XGages

Centerless lapped to a 5 microfinish Up to 6” long NIST Traceable Stabilized and heat treated to 60-62 RC Plus, Minus or Bilateral tolerance

Reversible pin gages in English andMetric up to 6” lengths. Ideal for deepand hard to reach holes or slots.

OVERALL LENGTH: 3 inchesInch Size Millimeter Size Price.0100" to .0299" .254mm to .759mm $121.22.0300" to .0599" .762mm to 1.52mm 65.20.0600" to .2009" 1.52mm to 5.10mm 44.42.2010" to .3749" 5.11mm to 9.52mm 46.71.3750" to .6349" 9.53mm to 16.13mm 49.80.6350" to .7500" 16.13mm to 19.05mm 49.80.7501" to .8750" 19.05mm to 22.23mm 87.42.8751" to 1.000" 22.23mm to 25.40mm 98.01


OVERALL LENGTH: 6 inchesInch Size Millimeter Size Price.0100" to .0299" .254mm to .759mm $390.69.0300" to .0599" .762mm to 1.52mm 217.58.0600" to .2009" 1.52mm to 5.10mm 95.94.2010" to .3749" 5.11mm to 9.52mm 97.38.3750" to .6349" 9.53mm to 16.13mm 98.88.6350" to .7500" 16.13mm to 19.05mm 107.47.7501" to .8750" 19.05mm to 22.23mm 193.02.8751" to .9375" 22.23mm to 23.81mm 218.24.9376" to 1.000" 23.82mm to 25.40mm 246.61


CustomLengths

18

19

Taperlocks*Steel&Chrome

*Quick changeover!The members pop outfor quick replacement.Excellent choice forlarger diameterinspection.

Taperlocks - Steel and ChromeUnilateral Tolerances • GO = PLUS tolerance, NOGO = MINUS toleranceChrome Plates - Add 30% For XXX - Add 100% to XX prices.

Size Range Std. GO Member Only Std. NOGOMember Only HandleClass Length 1 2-4 5-10 Length 1 2-4 5-10 No. Price

XX $53.59 $47.60 $41.68 $48.30 $43.01 $40.30.1050" to .1500" X 3/8 " 45.65 41.68 36.39 7/32 " 41.68 37.34 35.39

2.67mm to 3.81mm Y 9.5mm 40.55 37.02 32.43 5.6mm 37.02 33.37 31.10 00 $12.65Z 35.71 32.43 29.09 33.37 30.35 28.46

XX 50.94 45.65 40.30 45.96 41.68 37.97.1501" to .2300" X 13/32 " 43.39 39.04 35.08 9/32 " 41.68 37.02 35.08

3.81mm to 5.84mm Y 10.3mm 39.67 35.71 31.73 7.1mm 36.34 33.37 30.73 0 $12.65Z 32.43 29.79 27.14 31.10 28.46 26.32

XX 52.89 46.97 41.68 48.30 43.01 39.42.2301" to .3650" X 3/4 " 44.33 41.00 35.71 5/16 " 41.68 37.02 35.08

5.84mm to 9.27mm Y 19.1mm 41.00 37.02 33.06 7.9mm 37.02 34.07 31.73 1 $12.65Z 33.75 31.10 27.77 31.73 29.09 27.07

XX 54.90 48.30 43.64 50.25 44.33 40.87.3651" to .5100" X 1 " 46.28 42.31 37.72 3/8 " 43.01 38.03 36.39

9.27mm to 12.95mm Y 25.4mm 42.31 38.35 34.38 9.5mm 38.35 35.08 33.06 2 $12.65Z 35.08 31.73 28.46 33.06 29.97 27.77

XX 56.86 50.25 45.65 52.26 45.96 42.00.5101" to .8250" X 1 1/4 " 48.25 43.64 38.35 1/2 " 44.33 40.30 37.34

12.95mm to 20.96mm Y 31.8mm 43.64 39.04 35.71 12.7mm 39.67 39.45 34.70 3 $12.65Z 37.02 33.06 29.09 34.76 31.10 29.09

XX 65.48 58.18 52.26 58.88 52.26 47.92.8251" to 1.1350" X 1 1/2 " 52.89 48.30 41.68 5/8 " 48.30 44.33 40.49

20.96mm to 28.83mm Y 38.1mm 45.65 43.01 37.02 15.9mm 42.00 40.55 35.39 4 $12.65Z 41.00 37.02 32.43 37.72 34.70 31.73

XX 68.76 60.82 51.95 61.52 55.23 50.691.1351" to 1.5100" X 1 5/8" 62.84 56.23 48.93 3/4" 56.86 51.57 46.97

28.83mm to 38.35mm Y 41.3mm 51.57 47.60 41.68 19.1mm 46.97 42.31 39.04 5 $14.24Z 43.64 40.30 35.08 41.68 36.90 34.63

*Taperlocks are not returnable for credit or cancellation.

NIST traceable Plus, Minus or

Bilateral tolerances Class XX, X, Y or Z. Steel or Chrome

Trilocks*Steel&Chrome

*Got really big inspection jobs? These are your best choice forlarge diameters. Made to order, this is only a partial listing ofwhat we offer. Call us for price and delivery on larger sizes.

Trilocks - Steel and ChromeUnilateral Tolerances • GO = PLUS tolerance, NOGO = MINUS toleranceChrome Plates - Add 30% For XXX - Add 100% to XX prices up to 1.510" only.

Size Range Std. GO Member Only Std. NOGOMember Only HandleClass Length 1 2-4 5-10 Length 1 2-4 5-10 No. Price

XX $62.84 $52.45 $49.90 $56.86 $50.25 $45.65.7601" to .9470" X 1 1/4 " 53.21 47.42 43.39 3/4 " 48.93 43.45 40.30

19.30mm to 24.05mm Y 31.8mm 45.65 40.87 37.97 19.1mm 42.00 37.65 34.70 2 1/2 $17.40Z 37.97 34.70 32.36 35.71 32.56 30.29

XX 63.79 56.11 51.07 57.49 51.07 45.65.9471" to 1.1350" X 1 3/8 " 54.65 48.55 44.77 3/4 " 49.99 44.52 40.87

24.05mm to 28.83mm Y 34.9mm 46.91 42.00 38.35 19.1mm 42.94 38.66 35.39 3 1/2 17.40Z 40.49 36.52 33.62 37.97 34.38 31.73

XX 68.50 60.14 54.65 61.45 54.85 49.941.1351" to 1.5100" X 1 1/2 " 59.76 53.21 48.10 3/4 " 54.53 48.23 44.33

28.83mm to 38.25mm Y 38.1mm 49.56 44.27 40.55 19.1mm 45.21 40.55 37.02 4 1/2 18.98Z 42.00 37.65 34.70 38.98 35.01 32.43

XX 101.31 90.99 77.14 91.80 82.36 71.091.5101" to 2.0100" X 1 7/8 " 85.63 75.37 65.68 7/8 " 74.68 68.57 60.19

38.25mm to 51.05mm Y 47.6mm 76.94 69.01 60.14 22.2mm 67.10 61.70 54.72 5 1/2 20.13Z 62.71 56.48 50.25 58.68 52.58 47.47

XX 121.65 106.73 91.11 110.69 99.48 85.952.0101" to 2.5100" X 2 " 101.31 89.66 77.26 7/8 " 91.80 82.36 71.09

51.05mm to 63.75mm Y 50.8mm 89.66 79.08 68.76 22.2mm 78.40 71.85 62.71 6 20.13Z 75.37 67.44 58.81 66.74 60.14 56.23

XX 138.04 119.88 104.21 121.34 110.44 94.452.5101" to 3.0100" X 2 " 117.69 103.14 88.22 1 " 98.42 92.56 79.91

63.75mm to 76.45mm Y 50.8mm 101.31 89.66 75.37 25.4mm 88.22 82.36 71.09 7 20.13Z 83.94 74.37 64.92 76.00 67.44 58.68

XX 168.56 147.91 126.05 145.32 134.06 114.413.0101" to 3.5100" X 2" 128.89 124.04 106.10 1 " 119.95 112.96 97.72

76.45mm to 89.15mm Y 50.8mm 120.33 106.10 92.56 25.4mm 105.02 99.17 86.51 7 20.13Z 103.14 92.56 80.28 90.42 82.43 71.40

*Trilocks are not returnable for credit or cancellation.

20

Ring*

GagesThe Meyer Difference. The Material.We use only superb quality steels

such as 06 or Alloy Steels such as 8620 and HeatTreat our blanks to a minimum of 58RC.

The Stabilization Process. Subsequent grindingoperations can introduce heat and stress. Meyerputs all blanks through a stabilization process,cycling them through temperature extremes from-130˚F to +300˚F.

The Precision Lapping Process. “Lapping” is thefinishing process that removes small amounts ofmaterial from the gage surface and brings it withinits final tolerance limits.

Inspection with NIST - traceable gages. In ourMetrology area conditions are a strict, cool 68˚Fwhere the relative humidity is between 30- 50% and allof our masters are traceable to NIST.

ChromeRingGages .150" - 4.010" (381 mm - 101.85 mm)Size Range

Inches Milimeters Class XX Class X Class Y Class ZAbove to and Above to and In Quantities of: In Quantities of: In Quantities of: In Quantities of:including including 1 2-4 1 2-4 1 2-4 1 2-4

.150001 - .185 3.81 - 4.70 $180.81 $159.11 $162.73 $143.20 $144.65 $127.29 $144.65 $127.29

.185001 - .230 4.70 - 5.84 172.20 151.54 154.98 136.38 137.76 121.22 137.76 121.22

.230001 - .365 5.84 - 9.27 164.00 144.32 147.60 129.89 131.20 115.46 131.20 115.46

.365001 - .510 9.27 - 12.95 156.19 137.45 140.57 123.70 124.95 109.96 124.95 109.96

.510001 - .825 12.95 - 20.96 164.00 144.32 147.60 129.89 131.20 115.46 131.20 115.46

.825001 - 1.135 20.96 - 28.83 172.20 151.54 154.98 136.38 137.76 121.22 137.76 121.221.135001 - 1.510 28.83 - 38.35 198.03 174.26 178.23 156.84 158.42 139.41 158.42 139.411.510001 - 2.010 38.35 - 51.05 227.73 200.40 204.96 180.36 182.19 160.32 182.19 160.322.010001 - 2.510 51.05 - 63.75 284.67 250.50 256.20 225.46 227.73 200.40 227.73 200.402.510001 - 3.010 63.75 - 76.45 355.82 313.13 320.25 281.82 284.67 250.50 284.67 250.503.010001 - 3.510 76.45 - 89.15 409.21 360.10 368.29 324.09 327.36 288.08 327.36 288.083.510001 - 4.010 89.15 - 101.85 470.58 414.11 423.53 372.70 376.47 331.29 376.47 331.29

MASTER: bilateral (split) tolerance. GO: unilateral (one way) minus tolerance. NOGO: unilateral (one way) plus tolerance.Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed50% of applicable gagemaker's size tolerance and are nonaccumulative.

*Ring gages are not returnable for credit or cancellation.

21

Steel RingGages .040001"- 4.010"(1.02mm-101.85mm)Size Range


.040001 - .100 1.02 - 2.54 $170.79 $150.30 $153.72 $135.27 $136.64 $120.25 $136.64 $120.25

.100001 - .150 2.54 - 3.81 148.52 130.69 133.67 117.63 118.82 104.56 118.82 104.56

.150001 - .185 3.81 - 4.70 129.15 113.65 116.24 102.28 103.32 90.92 103.32 90.92

.185001 - .230 4.70 - 5.84 123.00 108.23 110.70 97.42 98.40 86.59 98.40 86.59

.230001 - .365 5.84 - 9.27 117.14 103.09 105.43 92.78 93.71 82.47 93.71 82.47

.365001 - .510 9.27 - 12.95 111.56 98.18 100.41 88.36 89.25 78.54 89.25 78.54

.510001 - .825 12.95 - 20.96 117.14 103.09 105.43 92.78 93.71 82.47 93.71 82.47

.825001 - 1.135 20.96 - 28.83 123.00 108.23 110.70 97.42 98.40 86.59 98.40 86.591.135001 - 1.510 28.83 - 38.35 153.75 135.29 138.37 121.77 123.00 108.23 123.00 108.231.510001 - 2.010 38.35 - 51.05 176.81 155.59 159.13 140.03 141.45 124.48 141.45 124.482.010001 - 2.510 51.05 - 63.75 208.64 183.60 187.77 165.24 166.91 146.87 166.91 146.872.510001 - 3.010 63.75 - 76.45 246.19 216.65 221.57 194.99 196.95 173.31 196.95 173.313.010001 - 3.510 76.45 - 89.15 290.50 255.64 261.45 230.08 232.41 204.52 232.41 204.523.510001 - 4.010 76.45 - 101.85 342.79 301.65 308.51 271.49 274.24 241.32 274.24 241.32 MASTER: bilateral (split) tolerance. GO: unilateral (one way) minus tolerance. NOGO: unilateral (one way) plus tolerance.Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed 50% of applicable gagemaker's sizetolerance and are nonaccumulative.

TungstenCarbideRingGages .040001"- 4.010"(1.02mm-101.85mm)Size Range


.040001 - .100 1.02 - 2.54 $272.88 $240.15 $245.61 $216.13 $218.32 $192.12 $218.32 $192.12

.100001 - .150 2.54 - 3.81 248.08 218.32 223.27 196.48 198.46 174.65 198.46 174.65

.150001 - .185 3.81 - 4.70 225.53 198.46 202.98 178.62 180.42 158.77 180.42 158.77

.185001 - .230 4.70 - 5.84 218.96 192.69 197.06 173.42 175.17 154.15 175.17 154.15

.230001 - .365 5.84 - 9.27 212.58 187.07 191.32 168.37 170.07 149.66 170.07 149.66

.365001 - .510 9.27 - 12.95 206.39 181.63 185.76 163.46 165.11 145.30 165.11 145.30

.510001 - .825 12.95 - 20.96 268.31 236.11 241.48 212.50 214.65 188.88 214.65 188.88

.825001 - 1.135 20.96 - 28.83 348.80 306.95 313.92 276.24 279.04 245.55 279.04 245.551.135001 - 1.510 28.83 - 38.35 470.88 414.37 423.79 372.94 376.71 331.50 376.71 331.501.510001 - 2.010 38.35 - 51.05 635.69 559.41 572.12 503.46 508.55 447.52 508.55 447.522.010001 - 2.510 51.05 - 63.75 826.39 727.23 743.76 654.51 661.11 581.78 661.11 581.782.510001 - 3.010 63.75 - 76.45 1,032.99 909.04 929.69 818.13 826.39 727.23 826.39 727.233.010001 - 3.510 76.45 - 89.15 1,291.24 1,136.29 1,162.12 1,022.67 1,032.99 909.04 1,032.99 909.043.510001 - 4.010 89.15 - 101.85 1,614.05 1,420.37 1,452.65 1,278.33 1,291.24 1,136.29 1,291.24 1,136.29 ALL RINGS tungsten carbide inserts with steel jackets. MASTER: bilateral (split) tolerance. GO: unilateral (one way) minus tolerance. NOGO: unilateral(one way) plus tolerance. Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed 50% ofapplicable gagemaker's size tolerance and are nonaccumulative. SIZES ABOVE AND BELOW THOSE LISTED will be quoted on request.

22

TAPERLOCK XX .00002 $95.38 $88.47 $84.31STYLE X .00004 23/32 in. 3/8 in. 7/32 in. 77.41 73.27 69.12 00 $12.65

.105 in. to .150 in. Y .00007 18.3 mm 9.5 mm 5.6 mm 66.35 60.82 58.062.67 mm to 3.81 mm Z .00010 55.29 52.53 49.76

XX .00002 87.08 82.94 78.80.1501 in. to .230 in. X .00004 13/16 in. 13/32 in. 9/32 in. 73.27 69.12 66.35 0 12.65

3.81 mm to 5.84 mm Y .00007 20.6 mm 10.3 mm 7.1 mm 64.97 59.44 56.68Z .00010 49.76 47.01 44.24


5.84 mm to 9.27 mm Y .00007 30.2 mm 19.1 mm 7.9 mm 66.35 60.82 58.06Z .00010 52.53 49.76 47.01

XX .00002 99.53 94.00 88.47.3651 in. to .510 in. X .00004 11/2 in. 1 in. 3/8 in. 80.18 76.03 71.88 2 12.65

9.27 mm to 12.95 mm Y .00007 38.1 mm 25.4 mm 9.5 mm 70.50 66.35 63.59Z .00010 55.29 52.53 49.75


12.95 mm to 20.96 mm Y .00007 47.6 mm 31.8 mm 12.7 mm 74.65 70.50 66.35Z .00010 58.06 55.29 52.53

XX .00003 121.65 114.73 109.20.8251 in. to 1.135 in. X .00006 21/8 in. 13/8 in. 5/8 in. 94.00 87.08 82.94 4 12.65

20.96 mm to 28.83 mm Y .00009 54.0 mm 34.9 mm 15.9 mm 77.41 73.27 69.12Z .00012 67.74 63.59 59.44


28.83 mm to 38.35 mm Y .00009 60.3 mm 38.1 mm 19.1 mm 94.00 87.08 82.94Z .00012 78.80 74.65 70.50

TRILOCK XX .00004 194.91 185.24 174.18STYLE X .00008 27/8 in. 17/8 in. 7/8 in. 156.21 146.53 139.62 5 1/2 17.47

1.5101 in. to 2.010 in. Y .00012 73.0 mm 47.6 mm 22.2 mm 136.86 129.95 123.0338.35 mm to 51.05 mm Z .00016 110.59 105.06 99.53

XX .00004 244.68 230.85 219.802.0101 in. to 2.510 in. X .00008 3 in. 2 in. 7/8 in. 197.67 188.00 176.94 6 18.12

51.05 mm to 63.75 mm Y .00012 76.2 mm 50.8 mm 22.2 mm 167.27 158.97 150.68Z .00016 138.23 131.32 124.42


63.75 mm to 76.45 mm Y .00015 76.2 mm 50.8 mm 22.2 mm 196.30 186.61 175.56Z .00020 161.74 153.44 143.76


76.45 mm to 89.15 mm Y .00015 76.2 mm 50.8 mm 22.2 mm 226.70 215.65 203.20Z .00020 189.38 179.71 170.03


89.15 mm to 101.85 mm Y .00015 79.4 mm 54.0 mm 22.2 mm 266.80 251.59 239.15Z .00020 223.95 212.89 200.44


101.85 mm to 114.55 mm Y .00015 79.4 mm 54.0 mm 22.2 mm 304.12 273.84 248.26Z .00020 250.21 237.76 223.95

*Progressives are not returnable for credit or cancellation.

When you need to check partsquickly, Progressive plug gagesare the best choice. Both theGO and NOGO diameters arestepped on a single gage mem-ber. All members are securelyattached to either a trilock ortaperlock handle. All handlesare marked with sizes anddirection of tolerance.

Class XX, X, Y, or Z NIST traceable GO, NOGO tolerances Tool Steel 60/62 Rockwell C Certificate of Accuracy

included Additional marking available

$0.15 per character

Unilateral Tolerance, GO - Plus Tolerance, NOGO - Minus Tolerance, Chrome Plates - Add 30%AGD Progressive Member Quantities Handle

Tolerance Member GO NOGOSize – Range Class Inches Length Portion Portion 1 2-4 5-10 No. Price

CustomProgressiveGages*

23

XX .00002 $92.61 $118.89 $156.21 $203.20 $84.33 $110.59.1500 in. to .2300 in. X .00004 7/8 in. 69.12 89.86 7/8 in. 116.12 152.06 7/16 in. 63.59 81.563.81 mm to 5.84 mm Y .00007 22.2 mm 56.68 81.56 22.2 mm 103.67 135.48 11.1 mm 58.06 76.03

XX .00002 95.38 124.42 157.59 211.50 85.71 111.97.2301 in. to .365 in. X .00004 1 in. 70.50 92.61 1 in. 117.50 154.82 1/2 in. 64.97 84.33

5.84 mm to 9.27 mm Y .00007 25.4 mm 64.97 84.33 25.4 mm 105.06 136.85 12.7 mm 59.44 78.80XX .00002 96.77 125.79 158.97 205.97 88.47 116.12

.3651 in. to .510 in. X .00004 11/8 in. 71.88 94.00 1 1/8 in. 121.65 157.59 9/16 in. 66.35 85.719.27 mm to 12.95 mm Y .00007 28.6 mm 66.35 85.71 28.6 mm 110.59 143.76 14.3 mm 60.82 92.61

XX .00002 98.14 128.56 161.74 208.73 89.86 117.50.5101 in. to .825 in. X .00004 11/4 in. 73.27 95.38 1 1/4 in. 123.03 161.74 5/8 in. 67.74 87.08

12.95 mm to 20.96 mm Y .00007 31.8 mm 67.74 87.08 31.8 mm 111.97 146.53 15.9 mm 63.59 81.56XX .00003 103.67 135.48 179.71 232.23 98.14 128.56

.8251 in. to 1.135 in. X .00006 1 3/8 in. 78.80 103.67 1 3/8 in. 134.09 174.18 11/16 in. 73.27 95.3820.96 mm to 28.83 mm Y .00009 34.9 mm 77.41 102.30 34.9 mm 131.32 170.03 17.5 mm 69.12 89.86

XX .00003 113.36 147.91 196.30 255.74 105.06 136.851.1351 in. to 1.510 in. X .00006 1 5/8 in. 84.33 110.59 1 5/8 in. 147.91 193.53 13/16 in. 77.41 100.9128.83 mm to 38.35 mm Y .00009 41.3 mm 78.80 103.67 41.3 mm 131.32 170.03 20.6 mm 70.50 89.86

XX .00004 131.32 170.03 222.56 288.91 118.89 156.211.5101 in. to 2.010 in. X .00008 1 7/8 in. 98.14 128.56 2 in. 165.88 217.03 7/8 in. 89.86 117.5038.35 mm to 51.05 mm Y .00012 47.6 mm 84.33 110.59 50.8 mm 150.68 194.91 22.2 mm 78.80 103.67

XX .00004 150.68 194.91 261.27 340.06 141.01 185.242.0101 in. to 2.510 in. X .00008 2 in. 110.59 147.20 2 in. 193.53 251.59 7/8 in. 106.44 138.2351.05 mm to 63.75 mm Y .00012 50.8 mm 100.91 128.56 50.8 mm 167.27 218.42 22.2 mm 89.86 117.50

XX .00005 174.18 226.70 301.36 392.59 158.97 205.972.5101 in. to 3.010 in. X .00010 2 in. 135.48 175.56 2 1/4 in. 223.95 290.30 1 in. 117.50 154.8263.75 mm to 76.45 mm Y .00015 50.8 mm 113.36 147.91 57.2 mm 192.14 250.21 25.4 mm 102.30 132.71


XX .00005 228.09 298.59 380.14 494.89 194.91 254.353.5101 in. to 4.010 in. X .00010 2 1/8 in. 170.03 222.56 2 1/4 in. 301.36 392.60 1 in. 158.97 205.9789.15 mm to 101.85 mm Y .00015 54.0 mm 147.91 193.53 57.2 mm 257.12 335.91 25.4 mm 135.48 175.56





Anything over above size - call for pricing. *Master Discs are not returnable for credit or cancellation.

MasterSettingDiscs* You can use these Master Discs to calibrate your measuringequipment. They are a must for your calibration lab and yourinspection areas. Meyerʼs Master Discs are available in threestyles and come with a Certificate of Accuracy.

Class XX, X or Y GO, NOGO, Bilateral tolerances available Steel 60/62 Rockwell C Comes complete with end grips All inch masters are furnished with black insulators All metric masters are furnished with yellow insulators Red and Green insulators are available on special order Roundness is within half of tolerance

STYLE #1 – Bilateral (Split) tolerance STYLE #2 – Unilateral (GO plus NOGOminus) STYLE #3 – Bilateral (Split) toleranceTolerance Style #1 Style #2 Style #3Size – Range Class Inches Lgth. Steel Chrome Lgth. Steel Chrome Lgth. Steel Chrome

*Note: For the range above 1.510” to and including 8.510” A.G.D. standards for style #2 calll for style #3master discs separated by an A.G.D. separator plate and linked together with a tie rod and insulators.

24

Meyer Gage now has a complete line of GO/NOGO Hex PlugGages manufactured to specs ANSI/ASME B107.17M and ANSIB18.3. Hex gages are perfect for inspecting machine head fasten-ers. All Hex gage assemblies are marked with the size.

All Hex Gages areClass Z tolerance

Made of steel Heat treated to 60/62

Rockwell C All prices include a

GO/NOGO andhandle

NIST traceable Additional marking

available for $0.20per character

Certificate ofAccuracy included

Fractional SizesD.E. Hex Gages to ANSI B18.3Size Price Size Price0.028 $358.02 7/32” $255.740.035 337.29 1/4” 255.740.05 293.06 5/16” 268.181/16” 293.06 3/8” 279.245/64” 293.06 7/16” 279.243/32” 293.06 1/2” 279.247/64” 293.06 9/16” 305.501/8” 255.74 5/8” 305.509/64” 255.74 3/4” 317.955/32” 255.74 7/8” 349.743/16” 255.74 1” 380.14

Metric SizesD.E. Hex Gages to ANSI B18.3Size Price Size Price

0.70 mm $358.02 6.00 mm $255.740.90 mm 337.29 8.00 mm 255.741.30 mm 293.06 10.00 mm 268.181.50 mm 293.06 12.00 mm 279.242.00 mm 293.06 14.00 mm 279.242.50 mm 293.06 17.00 mm 305.503.00 mm 255.74 19.00 mm 317.954.00 mm 255.74 22.00 mm 349.745.00 mm 255.74 24.00 mm 380.14

Fractional SizesD.E. Hex Gages to ANSI/ASME B107.17MSize Price Size Price

1/8” $254.35 15/16” $370.475/32” 254.35 13/8” 407.793/16” 254.35 17/16” 449.2713/64” 254.35 11/2” 456.187/32” 254.35 19/16” 456.1815/64” 254.35 15/8” 456.181/4” 254.35 111/16” 456.189/32” 266.80 13/4” 456.185/16” 266.80 113/16” 526.6811/32” 266.80 17/8” 526.683/8” 266.80 115/16” 526.687/16” 266.80 2” 526.681/2” 266.80 21/16” 526.689/16” 266.80 21/8” 526.6819/32” 266.80 23/16” 565.385/8” 276.47 21/4” 565.38

21/32” 276.47 25/16” 565.3811/16” 276.47 23/8” 565.383/4” 276.47 27/16” 594.41

25/32” 306.89 21/2” 594.4113/16” 306.89 29/16” 594.417/8” 306.89 25/8” 594.41

15/16” 306.89 211/16” 594.411” 306.89 23/4” 684.26

11/16” 337.29 213/16” 684.2611/8” 337.29 27/8” 684.2613/16” 337.29 215/16” 684.2611/4” 337.29 3” 688.41

Metric SizesD.E. Hex Gages to ANSI/ASME B107.17MSize Price Size Price2 mm $293.06 28 mm $337.293 mm 293.06 29 mm 337.29

3.2 mm 254.35 30 mm 337.294 mm 254.35 31 mm 337.295 mm 254.35 32 mm 370.47

5.5 mm 254.35 33 mm 370.476 mm 254.35 34 mm 407.79

6.3 mm 254.35 35 mm 407.797 mm 266.80 36 mm 449.278 mm 266.80 37 mm 456.189 mm 266.80 38 mm 456.1810 mm 266.80 39 mm 456.1811 mm 266.80 40 mm 456.1812 mm 266.80 41 mm 456.1813 mm 266.80 42 mm 456.1814 mm 266.80 43 mm 456.1815 mm 266.80 44 mm 525.2916 mm 276.47 45 mm 525.2917 mm 276.47 46 mm 525.2918 mm 276.47 47 mm 525.2919 mm 306.89 48 mm 525.2920 mm 306.89 49 mm 525.2921 mm 306.89 50 mm 525.2922 mm 306.89 55 mm 565.3823 mm 306.89 60 mm 565.3824 mm 306.89 65 mm 594.4125 mm 306.89 70 mm 684.2626 mm 337.29 75 mm 684.2627 mm 337.29

HexGages*

*Hex Gages are not returnable for credit or cancellation.

25

60ºThreadMeasuringWires

60° Threads(G) (G)

(n) Nominal (n) NominalThreads Best (C) Price Threads Best (C) Priceper Wire Nominal (Set of per Wire Nominal (Set ofInch Diameter Constant Three) Inch Diameter Constant Three)120 .00481” .00722” $103.03 16 .03608” .05413” $62.96100 .00577 .00866 103.03 14 .04124 .06186 62.9696 .00601 .00902 103.03 13 .04441 .06662 62.9690 .00642 .00962 103.03 12 .04811 .07217 62.9680 .00722 .01083 103.03 11 1/2 .05020 .07531 62.9672 .00802 .01203 103.03 11 .05249 .07873 62.9664 .00902 .01353 103.03 10 .05774 .08660 62.9656 .01031 .01546 103.03 9 .06415 .09623 62.9650 .01155 .01732 103.03 8 .07217 .10825 62.9648 .01203 .01804 62.96 7 1/2 .07698 .11547 62.9644 .01312 .01968 62.96 7 .08248 .12372 62.9640 .01443 .02165 62.96 6 .09623 .14434 62.9636 .01604 .02406 62.96 5 1/2 .10497 .15746 103.0332 .01804 .02706 62.96 5 .11547 .17321 103.0330 .01925 .02887 62.96 4 1/2 .12830 .19245 103.0328 .02062 .03093 62.96 4 .14434 .21651 103.0327 .02138 .03208 62.96 3 1/2 .16496 .24744 103.0326 .02221 .03331 62.96 3 1/4 .17765 .26647 103.0324 .02406 .03608 62.96 3 .19245 .28868 103.0322 .02624 .03936 62.96 2 3/4 .20995 .31492 103.0320 .02887 .04330 62.96 2 1/2 .23094 .34641 103.0318 .03208 .04811 62.96 2 .28868 .43301 103.03

29° Acme Best ThreadsThreads Diameter Priceper Best (SetInch Size of(n) Wire Three)

1 .51645” $118.771 1/3 .38734 118.771 1/2 .34430 118.771 3/4 .29511 118.772 .25823 118.772 1/2 .20658 118.773 .17215 118.773 1/2 .14756 94.454 .12911 94.454 1/2 .11477 94.455 .10329 94.455 1/2 .09390 94.456 .08608 94.457 .07378 94.458 .06456 94.459 .05738 94.4510 .05164 94.4512 .04304 94.4514 .03689 94.4516 .03228 .94.4518 .02869 94.4520 .02582 94.45

Meyer Gage Thread MeasuringWires together with a micrometer,are used to quickly & accuratelymeasure pitch diameters of exter-nal threads. They are perfect forcalibrating or checking wearthreads plug gages, and are usedto monitor and control pitch diame-ters manufactured threads. Atolerance of +/- .00001” of theexact size of the wires and within+/- .00002 of the best wirediameter (G) as specified forGrade A Wires.

100% inspection 2 microfinish or better Tool Steel All members 2” long Meets former federal

Specification GGG-W-366bfor Grade A Master ThreadWires

60° Metric ThreadsNominal PriceBest Wire Nominal (Set

Pitch Diameter Constant ofmm mm mm Three)

.2 .1155 .1732 $103.03.225 .1299 .1949 103.03.25 .1443 .2165 103.03.3 .1732 .2598 103.03

.35 .2021 .3031 103.03.4 .2309 .3464 103.03

.45 .2598 .3897 103.03.5 .2887 .4330 103.03.6 .3464 .5196 103.03.7 .4041 .6062 103.03

.75 .4330 .6495 62.96.8 .4619 .6928 62.96.9 .5196 .7794 62.96

1.0 .5774 .8660 62.961.25 .7217 1.0825 62.961.5 .8660 1.2990 62.96

1.75 1.0104 1.5155 62.962.0 1.1547 1.7321 62.962.5 1.4434 2.1651 62.963.0 1.7321 2.5981 62.963.5 2.0207 3.0311 62.964.0 2.3094 3.4641 62.964.5 2.5981 3.8971 62.965.0 2.8868 4.3301 103.035.5 3.1754 4.7631 103.036.0 3.4641 5.1962 103.037.0 4.0415 6.0622 103.038.0 4.6188 6.9282 103.039.0 5.1962 7.7942 103.03

10.0 5.7735 8.6603 103.03

Thread Measuring Wire Sets60 Degree ThreadMeasuring Wires PriceSet No. 30 HS* $2,172.2630 Sizes (5 to 80 TPI) withwood caseSet No. 34 HS* $2,580.0934 Sizes (4 to 80 TPI) withwood caseSet No. 20 HS* $1,340.8520 Sizes (6 to 36 TPI) withwood case

60 Degree Metric ThreadMeasuring WiresSet No. 30M $2,570.0830 Sizes (.2 pitch to 10 pitch)with wood caseSet No. 23M $1,933.2823 Sizes (.3 pitch to 6 pitch)with wood case

*7-1/2 & 22 TPI not included in these sets.**Not all sizes available.

26

Thread plug gages are made of selected steel, manufactured with the finest equipment avail-able, and meticulously inspected in every thread element. The name Meyer Gage is your guarantee of the finest in thread gages.

Standard in “X” tolerance.

Optional color gage handles available upon request — ideal to identify metric versus inch or master versus working gages.

The shanks on the gaging members are tapered to fit corresponding taper holes in the han-dles. Worn members may be removed and the handles salvaged for use with new members.

Member sizes 0 - 6 have male point in addition to length shown. Chip grooves are supplied on Go Members #10 machine screw and larger.

taperlock steel thread plug gages

Nominal Size Inch mm

AOverall

BGo Member& Handle

LengthC

HandleOnly

DGo

Member

ENo Go

Member

Handle

Hex Size No.

0, 1, 2, 34, 5, 6

8, 10, 121/4, 5/16

3/8, 7/16, 1/29/16, 5/8, 3/47/8, 1, 1-1/8

1-1/4, 1-3/8, 1-1/2

1.6, 2, 2.53, 3.5

4, 4.5, 56, 6.3, 7, 8

10, 1214, 16, 18, 20

24

2-1/22-31/323-3/164-1/164-5/85-1/85-7/8

5-1/2 + D

2-1/322-13/322-21/323-1/2

44-3/8

4-15/164-3/8 + D

1-1/21-3/4

22-3/4

33-1/43-5/8

4

1/45/1613/321/23/47/81*

3/167/329/325/163/81/25/83/4

3/161/45/163/81/2

11/167/81

00000012345

class X thread gage toleraNces

*D=1” for 12 threads per inch and finer; 1-1/4” for threads per inch coarser than 12. Item numbers and prices on next page.

Threadper Inch

8072645648403632282724201816141312

11-1/2111098765

4-1/24

ToleranceLead, Inch

.0002

.0002

.0002

.0002

.0002

.0002

.0002

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0003

.0004

.0004

.0004

.0004

.0004

.0004

Tolerance onHalf-Angleof Thread° +/- min.

0° 30’0° 30’0° 30’0° 30’0° 30’0° 20’0° 20’0° 15’0° 15’0° 15’0° 15’0° 15’0° 10’0° 10’0° 10’0° 10’0° 10’0° 10’0° 10’0° 10’0° 10’0° 5’0° 5’0° 5’0° 5’0° 5’0° 5’

Tolerance onMajor or Minor DiameterTo and

Including4” Diameter

.0003

.0003

.0004

.0004

.0004

.0004

.0004

.0005

.0005

.0005

.0005

.0005

.0005

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0007

.0007

.0007

.0008

.0008

.0008

.0009

Above4” Diameter

———————

.0007

.0007

.0007

.0007

.0007

.0007

.0009

.0009

.0009

.0009

.0009

.0009

.0009

.0011

.0011

.0011

.0013

.0013

.0013

.0015

To andIncluding

1-1/2” Diameter.0002.0002.0002.0002.0002.0002.0002.0003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0004.0004.0004

———

Tolerance on Pitch DiameterAbove

1-1/2” to4” Diameter

———

.0003

.0003

.0003

.0003

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0004

.0005

.0005

.0005

.0005

.0005

.0005

Above4” to

8” Diameter———————

.0005

.0005

.0005

.0005

.0005

.0005

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

.0006

Above8” to

12” Diameter———————

.0006

.0006

.0006

.0006

.0006

.0006

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

.0008

• General Dimensions

27

• Machined from the highest quality oil hardened tool steels• Manufactured on the latest equipment under ideal conditions• Meticulously inspected in every thread element• Chip grooves are supplied on all Go members #10 Machine Screw and larger• Standard in “X” tolerance, standard A.G.D. dimensions• Special thread plug gages available expedited delivery

how to order1. Quantity and type (member only, member with handle or double end with handle).2. Specify nominal size and threads per inch, Go and/or No Go.3. Class of fit 2B or 3B.4. Handles are not included with single members.5. If handle is required with a single member, please specify “with handle” at time of order.6. Include special marking instructions if any.7. For Taperlock members with Chrome add 25%.8. Special Thread Plug Gages price on application.9. If Special Pitch diameter limits specify Go and No Go gages.


taperlock style work plug gages product group #19-00t

Nominal Size

0 80 UNF 1 64 UNC 1 72 UNF 2 56 UNC 2 64 UNF 3 48 UNC 3 56 UNF 4 40 UNC 4 48 UNF 5 40 UNC 5 44 UNF 6 32 UNC 6 40 UNF 8 32 UNC 8 36 UNF 10 24 UNC 10 32 UNF 12 24 UNC 12 28 UNF 12 32 UNEF 1/4 20 UNC 1/4 28 UNF 1/4 32 UNEF 5/16 18 UNC 5/16 24 UNF 5/16 32 UNEF 3/8 16 UNC 3/8 24 UNF 3/8 32 UNEF 7/16 14 UNC 7/16 20 UNF 7/16 28 UNEF 1/2 13 UNC

Go Member Class 2B or 3B

Item No. M150100 M150200 M150300 M150400 M150500 M150600 M150700 M150900 M151000 M151100 M151200 M151300 M151400 M151500 M151600 M151700 M151800 M151900 M152000 M152100 M152200 M152300 M152400 M152500 M152600 M152700 M152800 M152900 M153000 M153100 M153200 M153300 M153400

No Go MemberClass 2BItem No.

M160100M160200M160300M160400M160500M160600M160700M160900M161000M161100M161200M161300M161400M161500M161600M161700M161800M161900M162000M162100M162200M162300M162400M162500M162600M162700M162800M162900M163000M163100M163200M163300M163400

Class 3BItem No.


Price PerMember

$42.93 42.93 42.93 42.93 42.93 38.64 38.64 38.64 38.64 32.91 32.91 32.91 32.91 32.91 32.91 32.91 32.91 32.91 32.91 44.36 28.62 28.62 55.81 28.62 28.62 55.81 30.05 30.05 64.40 30.05 30.05 64.40 32.91

Double End w/HandleClass 2BItem No.


Class 3BItem No.


Price$97.31 97.31 97.31 97.31 97.31 88.72 88.72 88.72 88.72 77.27 77.27 77.27 77.27 77.27 77.27 77.27 77.27 77.27 77.27

100.17 68.69 68.69

123.07 68.69 68.69

123.07 71.55 71.55

140.24 71.55 71.55

140.24 77.27

continued on next page

Handle OnlyPrice

$12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65

Size000000000000000000000000000000000000001111112222222

28

taperlock style work plug gages (continued) product group #19-00tNo Go Member

Price PerMember


M153516M153616M153716M153816M153916M154016M154116M154216M154316M154416M154516M154616M154716M154816M154916M155016M155116M155216M155316M155416M155516M155616M155716M155816M155916M156016M156116M156216M156316M156416M156516M156616M156716M156816M156916M157016M157116

Class 3BItem No.

M153517M153617M153717M153817M153917 M154017M154117M154217M154317M154417M154517M154617M154717M154817M154917M155017M155117M155217M155317M155417M155517M155617M155717M155817M155917M156017M156117M156217M156317M156417M156517M156617M156717M156817M156917M157017M157117

Price $77.27

143.10 97.31 97.31

160.27 97.31 97.31

160.27 160.27 105.89 105.89 163.13 183.17 111.62 111.62 183.17 186.03 131.65 131.65 131.65 208.93 214.65 163.13 163.13 211.79 227.53 170.29 170.29 218.94 247.56 190.32 190.32 259.01 267.60 213.22 213.22 276.18

Handle Only Price$12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24

Size2233333333333444444444444555555555555


Nominal Size

1/2 20 UNF 1/2 28 UNEF 9/16 12 UNC 9/16 18 UNF 9/16 24 UNEF 5/8 11 UNC 5/8 18 UNF 5/8 24 UNEF 11/16 24 UNEF 3/4 10 UNC 3/4 16 UNF 3/4 20 UNEF 13/16 20 UNEF 7/8 9 UNC 7/8 14 UNF 7/8 20 UNEF 15/16 20 UNEF 1 8 UNC 1 12 UNF 1 14 UNF 1 20 UNEF 1-1/16 18 UNEF 1-1/8 7 UNC 1-1/8 12 UNF 1-1/8 18 UNEF 1-3/16 18 UNEF 1-1/4 7 UNC 1-1/4 12 UNF 1-1/4 18 UNEF 1-5/16 18 UNEF 1-3/8 6 UNC 1-3/8 12 UNF 1-3/8 18 UNEF 1-7/16 18 UNEF 1-1/2 6 UNC 1-1/2 12 UNF 1-1/2 18 UNEF


Item No. M153500 M153600 M153700 M153800 M153900 M154000 M154100 M154200 M154300 M154400 M154500 M154600 M154700 M154800 M154900 M155000 M155100 M155200 M155300 M155400 M155500 M155600 M155700 M155800 M155900 M156000 M156100 M156200 M156300 M156400 M156500 M156600 M156700 M156800 M156900 M157000 M157100

Class 2BItem No.

M163500 M163600 M163700 M163800 M163900 M164000 M164100 M164200 M164300 M164400 M164500 M164600 M164700 M164800 M164900 M165000 M165100 M165200 M165300 M165400 M165500 M165600 M165700 M165800 M165900 M166000 M166100 M166200 M166300 M166400 M166500 M166600 M166700 M166800 M166900 M167000 M167100

Class 3BItem No.

M173500 M173600 M173700 M173800 M173900 M174000 M174100 M174200 M174300 M174400 M174500 M174600 M174700 M174800 M174900 M175000 M175100 M175200 M175300 M175400 M175500 M175600 M175700 M175800 M175900 M176000 M176100 M176200 M176300 M176400 M176500 M176600 M176700 M176800 M176900 M177000 M177100

$32.91 65.83 42.93 42.93 74.41 42.93 42.93 74.41 74.41 47.22 47.22 75.84 85.86 50.09 50.09 85.86 87.29 60.10 60.10 60.10 98.74

101.60 75.84 75.84

100.17 107.33 78.71 78.71

103.03 117.34 88.72 88.72

123.07 127.36 100.17 100.17 131.65

29

From start to finish, TiN coated Taperlock gages stretch your investment in quality. Meyer Gage gages feature high quality taper lock thread gages with a titanium nitride coating. TiN gages are first made of HSS Steel with the same care and accuracy all Meyer Gage gages display. Then we apply a thin coating of titanium nitride, offering an excellent, uniform hard coating with no loss of substrate hardness or physical distortion. The added hardness and lubricity of the coating gives you: • Greatly increased gage life - up to 10 times longer than uncoated gages. • Titanium Nitride (TiN) coated surface hardness is greater than that of the High Speed Steel base gage member. • Increased corrosion and abrasion resistance due to the inert hard characteristics of the TiN coating. • Reduced material build-up due to the added lubricity properties of the TiN coating. • Gage members are manufactured from selected High Speed Steel and TiN coated for added abrasion resistance and wear life. • Ideal for severe gaging environments. • Chip grooves are supplied on all Go members #10 machine screw and larger.

taperlock hss thread plug gages tiN coated

tiN coated taperlock hss product group #19-00ti

Nominal Size

2 56 UNC 2 64 UNF 3 48 UNC 3 56 UNF 4 40 UNC 4 48 UNF 5 40 UNC 5 44 UNF 6 32 UNC 6 40 UNF 8 32 UNC 8 36 UNF 10 24 UNC 10 32 UNF 12 24 UNC 12 28 UNF 1/4 20 UNC 1/4 28 UNF 5/16 18 UNC 5/16 24 UNF 3/8 16 UNC 3/8 24 UNF 7/16 14 UNC 7/16 20 UNF 1/2 13 UNC 1/2 20 UNF 9/16 12 UNC 9/16 18 UNF 5/8 11 UNC 5/8 18 UNF 3/4 10 UNC 3/4 16 UNF


Item No. M450400 M450500 M450600 M450700 M450900 M451000 M451100 M451200 M451300 M451400 M451500 M451600 M451700 M451800 M451900 M452000 M452200 M452300 M452500 M452600 M452800 M452900 M453100 M453200 M453400 M453500 M453700 M453800 M454000 M454100 M454400 M454500


M460400 M460500 M460600 M460700 M460900 M461000 M461100 M461200 M461300 M461400 M461500 M461600 M461700 M461800 M461900 M462000 M462200 M462300 M462500 M462600 M462800 M462900 M463100 M463200 M463400 M463500 M463700 M463800 M464000 M464100 M464400 M464500

Class 3BItem No.


Price $75.84

75.84 68.69 68.69 65.83 65.83 58.67 58.67 58.67 58.67 58.67 58.67 58.67 58.67 58.67 58.67 47.22 47.22 47.22 47.22 51.52 51.52 51.52 51.52 58.67 58.67 74.41 74.41 74.41 74.41 83.00 83.00



Class 3BItem No.


Price $163.13 163.13 148.82 148.82 143.10 143.10 128.79 128.79 128.79 128.79 128.79 128.79 128.79 128.79 128.79 128.79 105.89 105.89 105.89 105.89 114.48 114.48 114.48 114.48 128.79 128.79 160.27 160.27 160.27 160.27 177.44 177.44

TiN coated metric gages available, price on application.When ordering, please use the item numbers.

Handle OnlyPrice

$12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65

No.0000000000000000000000000000001111122222333333

30

• Trilock gages are reversible, doubling gage wear life.• When worn out at one end, they may be reversed on the specially designed handle and the unused end can be put to use.• Available as Class 2B.• Gage member is held on the handle by means of a socket head cap screw.• For chrome, add 30%.• For class 3B, price on application.• Standard in Class X tolerance.

trilock reVersiBle style product group #19-00tri Go Member

Class 2B or 3BItem No.

M104800 M104900 M105200 M105300 M105700 M105800 M106100 M106200 M106500 M106600 M106900 M107000


M114800 M114900 M115200 M115300 M115700 M115800 M116100 M116200 M116500 M116600 M116900 M117000

Price $81.57

81.57 90.15 90.15

108.76 108.76 121.64 121.64 143.10 143.10 166.00 166.00

Double End w/Handle

Item No. M104811 M104911 M105211 M105311 M105711 M105811 M106111 M106211 M106511 M106611 M106911 M107011

Price$178.88 178.88 196.05 196.05 233.25 233.25 260.44 260.44 303.37 303.37 349.16 349.16

Handle OnlyNo.2-1/22-1/23-1/23-1/23-1/23-1/24-1/24-1/24-1/24-1/24-1/24-1/2

trilock reVersiBle steel thread plug gages

AOverall

5-3/45-7/86-1/85-7/85-7/8

66-1/4

6

BGo Member& Handle

55-1/85-3/85-1/85-1/25-1/45-1/25-1/4

LengthC

HandleOnly

44444444

DGo

Member1

1-1/81-3/81-1/81-1/81-1/41-1/21-1/4

ENo Go

Member3/43/43/43/43/43/43/43/4

HandleHex Size

1/25/85/85/8

13/1613/1613/1613/16

No.2-1/23-1/23-1/23-1/24-1/24-1/24-1/24-1/2

Handle

Nominal Size7/81

1-1/8 - 71-1/8 - 121-1/4 - 71-1/4 - 12

1-3/8 - 6, 1-1/2 - 61-3/8 - 12, 1-1/2 - 12

Nominal Size

7/8 9 UN 7/8 14 UN 1 8 UN 1 12 UN 1-1/8 7 UN 1-1/8 12 UN 1-1/4 7 UN 1-1/4 12 UN 1-3/8 6 UN 1-3/8 12 UN 1-1/2 6 UN 1-1/2 12 UN

Price$17.40 17.40 17.40 17.40 17.40 17.40 18.98 18.98 18.98 18.98 18.98 18.98

Handles are not included with single members. If handles are required for Go or No Go members, specify “with handle.”3B Gages are available and priced the same as 2B Gages.When ordering, please use item numbers.

• General Dimensions

Class 2B

31

• Standard in Class X Tolerance.• Handles are not included with single members.• If handles are required for Go or No Go members, specify “with handle”.• For “W” Tolerance add 33.3%.• Titanium Nitride coated members available, price on application.• Larger sizes available, price on application.• Metric sizes available, price on application.

how to order1. Specify quantity and type (members only, member with handle or double end with handle).2. Specify nominal diameter and threads per inch Go and/or No Go.3. Select class of fit, 2B or 3B.4. Special marking instructions, if any.5. If handle is required with a single member, please specify “with handle” at time of order.

how to price1. Select desired size and class of fit.2. For chrome, add 30%.

helical coil taperlock steel gages (sti)

helical coil gages (sti) product group #19-00thc Go Member

Class 2B or 3BItem No.

M550400 M550900 M551300 M551500 M551700 M551800 M552200 M552300 M552500 M552600 M552800 M552900 M553200 M553400 M553500

Class 2BItem No.


Price $71.55

62.96 57.24 57.24 57.24 57.24 52.95 52.95 52.95 52.95 57.24 57.24 57.24 58.67 58.67



No.00000000112222333

Price $12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65

Class 3BItem No.


Class 3BItem No.


No Go Member

32

Nominal Size

2 56 UNC 4 40 UNC 6 32 UNC 8 32 UNC 10 24 UNC 10 32 UNF 1/4 20 UNC 1/4 28 UNF 5/16 18 UNC 5/16 24 UNF 3/8 16 UNC 3/8 24 UNF 7/16 20 UNF 1/2 13 UNC 1/2 20 UNF

how to order1. Specify quantity and type (members only, member with handle or double end with handle).2. Specify nominal diameter and threads per inch Go and/or No Go.3. Select class of fit, 2B or 3B.4. Special marking instructions, if any.5. If handle is required with a single member, please specify “with handle” at time of order.

how to price1. Select desired size and class of fit.2. For Chrome, add 30%.

reVersiBle steel thread plug gages

reVersiBle style work plug gages product group #19-00w reV

Nominal Size

0 80 UNF 1 64 UNC 1 72 UNF 2 56 UNC 2 64 UNF 3 48 UNC 3 56 UNF 4 40 UNC 4 48 UNF 5 40 UNC 5 44 UNF 6 32 UNC 6 40 UNF 8 32 UNC 8 36 UNF 10 24 UNC 10 32 UNF 12 24 UNC 12 28 UNF 12 32 UNEF 1/4 20 UNC 1/4 28 UNF 1/4 32 UNEF 5/16 18 UNC 5/16 24 UNF 5/16 32 UNEF 3/8 16 UNC 3/8 24 UNF 3/8 32 UNEF 7/16 14 UNC 7/16 20 UNF 7/16 28 UNEF 1/2 13 UNC 1/2 20 UNF 1/2 28 UNEF 9/16 12 UNC 9/16 18 UNF 9/16 24 UNEF 5/8 11 UNC 5/8 18 UNF 5/8 24 UNEF 11/16 24 UNEF 3/4 10 UNC 3/4 16 UNF 3/4 20 UNEF

Go Member Item No.

M100100 M100200 M100300 M100400 M100500 M100600 M100700 M100900 M101000 M101100 M101200 M101300 M101400 M101500 M101600 M101700 M101800 M101900 M102000 M102100 M102200 M102300 M102400 M102500 M102600 M102700 M102800 M102900 M103000 M103100 M103200 M103300 M103400 M103500 M103600 M103700 M103800 M103900 M104000 M104100 M104200 M104300 M104400 M104500 M104600

No GoClass 2BItem No.


Price $52.95

52.95 52.95 52.95 52.95 50.09 50.09 50.09 50.09 44.36 44.36 44.36 44.36 44.36 44.36 44.36 44.36 44.36 44.36 65.83 40.07 40.07 60.10 40.07 40.07 60.10 44.36 44.36 65.83 44.36 44.36 65.83 44.36 44.36 65.83 44.36 44.36 65.83 44.36 44.36 67.26 68.69 57.24 57.24 88.72



Price$118.77 118.77 118.77 118.77 118.77 113.05 113.05 113.05 113.05 101.60 101.60 101.60 101.60 101.60 101.60 103.03 103.03 103.03 103.03 145.96 94.45 94.45

134.51 95.88 95.88

135.95 104.46 104.46 147.39 105.89 105.89 148.82 105.89 105.89 148.82 107.33 107.33 150.26 107.33 107.33 135.95 160.27 137.38 137.38 200.34

Size1W1W1W2W2W2W2W2W2W2W2W2W2W2W2W3W3W3W3W3W3W3W3W4W4W4W4W4W4W5W5W5W5W5W5W6W6W6W6W6W6W7W7W7W7W

Price$14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 15.81

15.81 15.81 15.81 15.81 15.81 15.81 15.81 17.40 17.40 17.40 17.40 17.40 17.40 18.98 18.98 18.98 18.98 18.98 18.98 20.56 20.56 20.56 20.56 20.56 20.56 25.30 25.30 25.30 25.30

Handle Only

33

• Manufactured from selected graphite steels to American Gage Design (AGD Style).• Machined and accurately lapped for an exacting thread size.• Meticulously inspected in every element.• Best if purchased with and mated to a setting plug gage at the time of order.• No Go rings are furnished with an identifying groove around the rim of the gage.• Optional Thread Ring Gage Holders available, optional.• Class 2 and Class 3 available on request.

how to order1. Specify nominal diameter, pitch and class of fit 2A, 3A, or Basic.2. Setting Plugs should be ordered at the same time as the corresponding ring gages.3. Request Ring Gages be set with new Set Plug before shipping.4. Left hand available, price on application.5. Larger sizes available, price on application.6. Specials available, price on application.7. Chrome available on rings, add 50%.

thread riNg gages

Nominal Size 01122334455668810101212121/41/41/45/165/165/163/83/83/87/167/167/161/21/21/29/169/169/16

Class 2A Item No.

M240100M240200M240300M240400M240500M240600M240700M240900M241000M241100M241200M241300M241400M241500M241600M241700M241800M241900M242000M242100M242200M242300M242400M242500M242600M242700M242800M242900M243000M243100M243200M243300M243400M243500M243600M243700M243800M243900

Class 3A/BasicItem No.


Price$174.58 157.41 157.41 130.22 130.22 130.22 130.22 118.77 118.77 101.60 101.60 103.03 103.03 108.76 108.76 108.76 108.76 108.76 108.76 143.10 95.88 95.88

127.36 95.88 95.88

127.36 101.60 101.60 131.65 101.60 101.60 131.65 113.05 113.05 144.53 127.36 127.36 153.12

No.11111111111111111111222222333333333444

Price$22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 25.30 25.30 25.30 25.30 25.30 25.30 28.46 28.46 28.46 28.46 28.46 28.46 28.46 28.46 28.46 34.79 34.79 34.79

Holder Only

riNg gages product group #19-00rGo Ring Gage

Price$174.58 157.41 157.41 130.22 130.22 130.22 130.22 118.77 118.77 101.60 101.60 103.03 103.03 108.76 108.76 108.76 108.76 108.76 108.76 143.10 95.88 95.88

127.36 95.88 95.88

127.36 101.60 101.60 131.65 101.60 101.60 131.65 113.05 113.05 144.53 127.36 127.36 153.12

No Go Ring Gage

8064725664485640484044324032362432242832202832182432162432142028132028121824

UNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEF

Class 2A Item No.


Class 3AItem No.



34

Nominal Size 5/85/85/811/163/43/43/413/167/87/87/815/1611111-1/161-1/81-1/81-1/81-3/161-1/41-1/41-1/41-5/161-3/81-3/81-3/81-7/161-1/21-1/21-1/2

Class 2A Item No.

M244000M244100M244200M244300M244400M244500M244600M244700M244800M244900M245000M245100M245200M245300M245400M245500M245600M245700M245800M245900M246000M246100M246200M246300M246400M246500M246600M246700M246800M246900M247000M247100



Price$127.36 127.36 154.55 155.98 166.00 166.00 187.46 190.32 186.03 186.03 200.34 206.06 221.81 221.81 221.81 234.68 241.84 241.84 241.84 257.58 266.17 267.60 267.60 279.05 287.63 296.22 296.22 313.39 317.68 329.13 329.13 342.01

No.44444444555555555555566666666666

Price $34.79 34.79 34.79 34.79 34.79 34.79 34.79 34.79 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 44.28 53.76 53.76 53.76 53.76 53.76 53.76 53.76 53.76 53.76 53.76 53.76

Handle Only

riNg gages (continued) product group #19-00rGo Ring Gage

Price $127.36 127.36 154.55 155.98 166.00 166.00 187.46 190.32 186.03 186.03 200.34 206.06 221.81 221.81 221.81 234.68 241.84 241.84 241.84 257.58 266.17 267.60 267.60 279.05 287.63 296.22 296.22 313.39 317.68 329.13 329.13 342.01

No Go Ring Gage

1118242410162020914202081214201871218187121818612181861218

UNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEF

Class 2A Item No.


Class 3AItem No.


thread riNg gages

35

• Truncated type thread setting plugs have a full form threaded portion and a truncated portion.• The full form portion checks the pitch diameter and major diameter clearance.• The Truncated portion checks pitch diameter and flank angle wear.• Made from selected steels, ground and accurately lapped.• Meticulously inspected in every thread element.• Standard thread setting plugs are Class X tolerance on pitch diameter, while holding “W” tolerance on lead and angles.• For class “W” tolerance on pitch diameter, add 25%.

how to order1. Specify Quantity.2. Specify nominal size, pitch and class of fit 2A or 3A.3. Handles are not included with single members. If handles are required for Go or No Go members, specify “with handles” at time of order.4. Setting Plugs should be ordered at the same time as the corresponding ring gages.5. Request Ring Gages be set with new Set Plug before shipping.6. For class W tolerance, add 25%.7. Left hand available, price on application.5. Specials available, price on application.

truNcated thread settiNg plugs

Nominal Size 01122334455668810101212121/41/41/45/165/165/163/83/83/87/167/167/16

Class 2A Item No.




Price $98.74

98.74 98.74 98.74 98.74 91.58 91.58 91.58 91.58 85.86 85.86 85.86 85.86 85.86 85.86 85.86 85.86 91.58 91.58

110.19 78.71 78.71

113.05 78.71 78.71

113.05 81.57 81.57

131.65 87.29 87.29

131.65

No.0000000000000000000000000000000000000000111111222222

Price$12.65 12.65

12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65

Handle

truNcated settiNg plugs product group #19-00sGo Member

Price $208.93

208.93 208.93 208.93 208.93 208.93 194.62 194.62 194.62 194.62 183.17 183.17 183.17 183.17 183.17 183.17 183.17 183.17 194.62 194.62 231.82 168.86 168.86 237.55 168.86 168.86 237.55 174.58 174.58 274.75 186.03 186.03

Go - No Go w/handle

8064725664485640484044324032362432242832202832182432162432142028

UNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNCUNFUNEF

Class 2A Item No.


Class 3AItem No.



Class 2A Item No.


Class 3AItem No.


No Go Member

36

Nominal Size 1/21/21/29/169/169/165/85/85/811/163/43/43/413/167/87/87/815/1611111-1/161-1/81-1/81-1/81-3/161-1/41-1/41-1/41-5/161-3/81-3/81-3/81-7/161-1/21-1/21-1/2

Class 2A Item No.




Price $88.72

88.72 145.96 101.60 101.60 155.98 105.89 105.89 157.41 171.72 123.07 123.07 166.00 176.01 144.53 144.53 180.31 183.17 166.00 166.00 166.00 196.05 194.62 194.62 194.62 204.63 204.63 211.79 211.79 238.98 243.27 244.70 244.70 251.86 259.01 261.87 261.87 270.46

No.22233333333333444444444444 555555555555

Price $12.65

12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24 14.24

Handle

truNcated settiNg plugs (continued) product group #19-00sGo Member

Price $188.89 188.89 303.37 214.65 214.65 323.41 223.24 223.24 326.27 354.89 257.58 257.58 343.44 363.47 300.51 300.51 372.06 377.78 343.44 343.44 343.44 403.54 400.68 400.68 400.68 420.71 422.15 436.46 436.46 490.83 499.42 502.28 502.28 516.59 530.90 536.63 536.63 553.80

Go - No Go w/handle

1320281218241118242410162020914202081214201871218187121818612181861218

UNCUNFUNEFUNCUNFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEFUNEFUNCUNFUNEF

Class 2A Item No.


Class 3AItem No.


Class 2A Item No.


Class 3AItem No.


No Go Member

The shanks on the gaging members are tapered to fit corresponding tapered holes in the handle.Worn members may be removed and the handle salvaged for use with new members.Members size 0-6 have male point in addition to length shown.

37

• Standard in 6H Tolerance.• For Taperlocks with chrome, add 30%• Left hand available, price on application.• Larger sizes available, price on application.

how to order1. Specify quantity.2. Specify nominal diameter and threads per inch.3. Specify special marking instructions, if any.

how to price1. Select desired size.

metric steel taperlock thread plug gages

Metric Size and Pitch M1.6 X 0.35M1.8 X 0.35M2.0 X 0.40M2.2 X 0.45M2.5 X 0.45M3.0 X 0.50M3.5 X 0.60M4.0 X 0.70M4.5 X 0.75M5.0 X 0.80M6.0 X 1.00M7.0 X 1.00M8.0 X 1.25M8.0 x 1.00M10.0 X 1.50M10.0 X 1.25M12.0 X 1.75M12.0 X 1.50M12.0 X 1.25M14.0 X 2.00M14.0 X 1.50M16.0 X 2.00M16.0 X 1.50M17.0 X 1.00M18.0 X 2.50M18.0 X 1.50M20.0 X 2.50M20.0 X 1.50M22.0 X 2.50M22.0 X 1.50M24.0 X 3.00M24.0 X 2.00M27.0 X 3.00M27.0 X 2.00M30.0 X 3.50M30.0 X 2.00M33.0 X 3.50M33.0 X 2.00M36.0 X 4.00M36.0 X 3.00

Go Member Item No.

M20100901M20101101M20101301M20101501M227200M227300M227400M227500M20102501M227600M227700M20103201M227800M20103501M228000M228100M228300M228400M228500M228700M228800M229000M229100M229200M20106201M229300M229400M229500M20107001M20107201M20107401M20107501M20108201M20108301M20108901M20109101M20109601M20109801M20110101M20110201

No Go MemberItem No.


Price $52.95

52.95 52.95 52.95 48.65 48.65 42.93 42.93 44.36 42.93 35.78 37.21 34.34 34.34 37.21 37.21 40.07 40.07 40.07 45.79 45.79 45.79 45.79 48.65 51.52 48.65 58.67 58.67 58.67 58.67 67.26 67.26 91.58 91.58

110.19 110.19 110.19 110.19 127.36 127.36

Double End w/HandleItem No.


Price$117.34 117.34 117.34 117.34 108.76 108.76 97.31 97.31

100.17 97.31 83.00 85.86 80.14 80.14 85.86 85.86 91.58 91.58 91.58

103.03 103.03 103.03 103.03 108.76 58.67

114.48 114.48 114.48 145.96 114.48 145.96 145.96 194.62 194.62 233.25 233.25 233.25 233.25 267.60 267.60

Size0000000000000000000000111122222333333333444444555555

Price$12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 14.24 14.24 14.24 14.24 14.24 14.24

Handle Only

metric steel taperlock thread plug gages product group #19-00mt

38

• Standard in 6H Tolerance.• Left hand available, price on application.• Larger sizes available, price on application.• For chrome, add 30%.

how to order1. Specify quantity.2. Specify nominal diameter and threads per inch.3. Specify special marking instructions, if any.

how to price1. Select desired size.

reVersiBle metric steel thread plugs

Metric Size & PitchCoarse M2.5 X 0.45M3.0 X 0.50M3.5 X 0.60M4.0 X0.70M5.0 X 0.80M6.0 X 1.00M8.0 X 1.25M8.0 X 1.00M10.0 X 1.50M10.0 X 1.25M12.0 X 1.75M12.0 X 1.25M14.0 X 2.00M14.0 X 1.50M16.0 X 2.00M16.0 X 1.50M18.0 X 1.50

Go Member Item No.

M207200M207300M207400M207500M207600M207700M207800M207900M208000M208100M208300M208500M208700M208800M209000M209100M209300


M217200 M217300 M217400 M217500 M217600 M217700 M217800 M217900 M218000 M218100 M218300 M218500 M218700 M218800 M219000 M219100 M219300

Price $65.83

61.53 51.52 51.52 51.52 42.93 42.93 42.93 48.65 48.65 48.65 48.65 57.24 57.24 57.24 57.24 65.83

Double End w/HandleItem No.

M207221 M207321 M207421 M207521 M207621 M207721 M207821 M207921 M208021 M208121 M208321 M208521 M208721 M208821 M209021 M209121 M209321

No.2W2W2W2W3W3W4W4W4W4W5W5W6W6W6W6W7W

Price $14.24 14.24 14.24 14.24 15.81 15.81 17.40 17.40 17.40 17.40 18.98 18.98 20.56 20.56 20.56 20.56 25.30

Handle OnlyreVersiBle metric thread plugs product group #19-00h

metric - iNch pitch equiValeNtsPitchmm0.350.400.450.500.600.700.750.800.901.00

Pitch inInches.01378.01575.01772.01969.02362.02756.02953.03150.03543.03937

ThreadsPer Inch72.5763.5056.4450.8042.3336.2933.8731.7528.2225.40

Pitchmm1.251.501.752.002.503.004.004.505.006.00

Pitch inInches.04921.05906.06890.07874.09843.11811.15748.17717.19685.23622

ThreadsPer Inch

20.3216.9314.5112.7010.168.466.355.645.084.23

39

Price$144.53 135.95 115.91

115.91 117.34

100.17 101.61101.61113.05113.05114.48114.48133.08133.08133.08133.08154.55

• Standard in 6g Tolerance.• Manufactured from selected steels to American Gage Design (AGD Style).• Machined and accurately lapped for an exacting thread size.• Meticulously inspected in every element.• Best if purchased with and mated to a setting plug gage at the time of order.• No Go rings are furnished with an identifying groove around the rim of the gage.• Optional Thread Ring Gage Holders available, optional.• Chrome Plate Rings, add 50%.• Left hand available, price on application.• Larger sizes available, price on application

how to order1. Standard in 6g Tolerance.2. Setting Plugs should be ordered at the same time as the corresponding ring gages.3. Ring Gages will be set with new Set Plug before shipping.4. Chrome available on rings, add 50%.5. Left hand available, price on application.6. Larger sizes available, price on application.7. Specials available, price on application.

metric thread riNg gages

Holdermetric thread riNgs product group #19-00mr

Nominal SizePitch mm

M1.6 X 0.35M1.8 X 0.35M2.0 X 0.40M2.2 X 0.45M2.5 X 0.45M3.0 X 0.50M3.5 X 0.60M4.0 X 0.70M4.5 X 0.75M5.0 X 0.80M6.0 X 1.00M7.0 X 1.00M8.0 X 1.25M8.0 x 1.00M10.0 X 1.50M10.0 X 1.25M12.0 X 1.75M12.0 X 1.50M12.0 X 1.25M14.0 X 2.00M14.0 X 1.50M16.0 X 2.00M16.0 X 1.50M17.0 X 1.00M18.0 X 2.50M18.0 X 1.50M20.0 X 2.50M20.0 X 1.50M22.0 X 2.50M22.0 X 1.50M24.0 X 3.00M24.0 X 2.00M27.0 X 3.00M27.0 X 2.00M30.0 X 3.50M30.0 X 2.00M33.0 X 3.50M33.0 X 2.00M36.0 X 4.00M36.0 X 3.00

Go Ring Item No.


No Go RingItem No.


Price$176.01 176.01 158.84 158.84 158.84 137.38 137.38 127.36 127.36 127.36 117.34 117.34 117.34 117.34 127.36 127.36 135.95 135.95 151.69 151.69 151.69 151.69 151.69 203.20 203.20 203.20 251.86 251.86 257.58 257.58 296.22 296.22 309.10 309.10 313.39 313.39 346.30 346.30 387.80 387.80

Item No.M27100963M27101163M27101363M27101563M367237M367337M367437M367537M27102563M367637M367737M27103263M367837M367937M368037M368137M368337M368437M368537M368737M368837M369037M369137M369237M27106263M369337M369437M369537M27107063M27107263M27107463M27107563M27108263M27108363M27108963M27109163M27109663M27109863M27110163M27110263

Price $352.03 352.03 317.68 317.68 317.68 274.75 274.75 254.72 254.72 254.72 234.68 234.68 234.68 234.68 254.72 254.72 271.89 271.89 271.89 303.37 303.37 303.37 303.37 406.40 406.40 406.40 503.71 503.71 515.16 515.16 592.43 592.43 618.19 618.19 626.78 626.78 692.60 692.60 775.60 775.60

Size1111111111222233333444444444555555666666

Price$22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 22.14 25.30 25.30 25.30 25.30 28.46 28.46 28.46 28.46 28.46 34.79 34.79 34.79 34.79 34.79 34.79 34.79 34.79 34.79 44.28 44.28 44.28 44.28 44.28 44.28 53.76 53.76 53.76 53.76 53.76 53.76

Go-No Go w/o holder

40

• Standard in 6g Tolerance.• Left hand available, price on application.• Larger sizes available, price on application

how to order1. Standard in 6g Tolerance.2. Specify Quantity.3. Handles are not included with single members. If handles are

required for Go or No Go members, specify “with handles” at time of order.

4. Setting Plugs should be ordered at the same time as the corre-sponding ring gages.

5. Request Ring Gages be set with new Set Plug before shipping.6. For class “W” tolerance, add 25%.7. Left hand available, price on application.8. Specials available, price on application.9. When ordering please use item numbers.

metric thread settiNg plugs

Handle OnlytruNcated settiNg plugs product group #19-00ms

Metric SizePitch mm

M1.6 X 0.35M1.8 X 0.35M2.0 X 0.40M2.2 X 0.45M2.5 X 0.45M3.0 X 0.50M3.5 X 0.60M4.0 X 0.70M4.5 X 0.75M5.0 X 0.80M6.0 X 1.00M7.0 X 1.00M8.0 X 1.25M8.0 x 1.00M10.0 X 1.50M10.0 X 1.25M12.0 X 1.75M12.0 X 1.50M12.0 X 1.25M14.0 X 2.00M14.0 X 1.50M16.0 X 2.00M16.0 X 1.50M17.0 X 1.00M18.0 X 2.50M18.0 X 1.50M20.0 X 2.50M20.0 X 1.50M22.0 X 2.50M22.0 X 1.50M24.0 X 3.00M24.0 X 2.00M27.0 X 3.00M27.0 X 2.00M30.0 X 3.50M30.0 X 2.00M33.0 X 3.50M33.0 X 2.00M36.0 X 4.00M36.0 X 3.00

Go Member Item No.




Price$123.07 123.07 115.91 115.91 115.91 113.05 113.05 108.76 108.76 108.76 97.31 97.31 97.31 97.31

104.46 104.46 108.76 108.76 108.76 125.93 125.93 125.93 125.93 140.24 140.24 140.24 140.24 140.24 196.05 196.05 198.91 198.91 211.79 211.79 217.51 217.51 226.10 226.10 246.13 246.13

Item No.M23600963M23601163M23601363M23601563M387239M387339M387439M387539M23602563M387639M387739M23603263M387839M387939M388039M388139M388339M388439M388539M388739M388839M389039M389139M389239M23606263M389339M389439M389539M23607063M23607263M23607463M23607563M23608263M23608363M23608963M23609163M23609663M23609863M23610163M23610263

Price$257.58 257.58 243.27 243.27 243.27 237.55 237.55 228.96 228.96 228.96 206.06 206.06 206.06 206.06 220.37 220.37 228.96 228.96 228.96 263.30 263.30 263.30 263.30 291.92 291.92 291.92 291.92 291.92 403.54 403.54 409.27 409.27 435.02 435.02 447.90 447.90 465.08 465.08 505.14 505.14

No.0000000000000000000000111122222333333333444444555555

Price$12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 12.65 14.24 14.24 14.24 14.24 14.24 14.24

Double End w/Handle

41

HandleH

No. Length Hex 1 2-3/4 3/8 2 3 1/2 3 3-1/4 11/16 3 3-1/4 11/16 4 3-5/8 7/8 4 3-5/8 7/8 5 4 1 5 4 1 5 4 1 5 4 1 6 5 1-1/8 6 5 1-1/8

American National Taper Pipe Thread Gages (NPT) are furnished to thread specifications which are in agreement with the National Institute of Standards and Technology American Gage Design dimensions as shown below.Master and reference gages can be furnished on request.

taper pipe gages - Npt• (NPT) are furnished American National Pipe Thread NPT TAPER PIPE GAGES made to American Gage Dimensions (AGD).• To thread specifications which are in agreement with National Institute of Standards.• Larger sizes and ANPT available upon request.

additioNal pipe thread gages• Straight Pipe: NPSF, NPSL, NPSC, NPSM and other special pipe gages available upon request.

taper pipe gages_— Npt

taper pipe gages - Npt dimeNsioNs

Item No.M701140M701141M701142M701143M701144M701145M701146M701147M701148M701149M701150M701151

Price $87.29

60.10 68.69 78.71 88.72

100.17 113.05 124.50 141.67 171.72 206.06 241.84

Handle No. Price 1 $12.65 2 12.65 3 12.65 3 12.65 4 14.24 4 14.24 5 14.24 5 14.24 5 14.24 5 14.24 6 23.72 6 23.72

Length.1600.1615.2278.2400.3200.3390.4000.4200.4200.4360.6820.7660

Nominal Size 1/16 27 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 2-1/2 8 3 8

Nominal Size 1/16 27 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 2-1/2 8 3 8

Minus.001.001.001.001.001.001.001.001.001.001.002.002

L2Min.

Length.261.264.402.408.534.546.683.707.723.757

1.1381.200

DTaper-Lock Only1/41/41/41/4

5/165/163/83/83/83/8——

Tolerance

Plug DimensionsLength Member

L1 to NotchRing Dimensions

Nominal Thickness A Size L1 Tolerance Outside Thin Plug Dia. 1/16 .1600 .001 1-1/8 1/8 .1615 .001 1-1/8 1/4 .2278 .001 1-3/8 3/8 .2400 .001 1-1/2 1/2 .3200 .001 1-3/4 3/4 .3390 .001 2 1 .4000 .001 2-1/21-1/4 .4200 .001 31-1/2 .4200 .001 3-1/4 2 .4360 .001 3-3/42-1/2 .6820 .002 4-1/4 3 .7660 .002 5

L1 Plug GageItem No.

M7011401M7011411M7011421M7011431M7011441M7011451M7011461M7011471M7011481M7011491M7011501M7011511

Price $98.74 101.60 80.14 71.55

154.55 137.38 125.93 227.53 184.60 113.05 90.15

263.30

L1 Plug Gage w/handleNominal Size

1/16 27 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 2-1/2 8 3 8

l1 siNgle eNd plug gages - Npt #19-00tp l1 thiN riNg gages - Npt #19-00tp


Price $161.70

113.05 124.50 143.10 158.84 181.74 206.06 224.67 267.60 320.54 376.35 467.94

riNg dimeNsioNs

42

NptF (dryseal) taper pipe gagesDryseal pipe threads are generally used in more critical applications than NPT and therefore a greater variety of gages and/or measuring equipment is used to more adequately check size, taper and thread form.

• L1 and L3 Plugs supplied with 1 step as standard.• L1 = Length of engagement in hand tight make up.• L2 = Length of effective thread (external).• L3 = Length of 3 threads beyond L1 for wrench make up.

taper pipe gages_— NptF

taper pipe gages - NptF dimeNsioNs


Price $170.29

118.77 141.67 150.26 167.43 190.32 216.08 234.68 280.48 334.85 393.53 490.83

L1To BasicNotch.1600.1615.2278.2400.3200.3390.4000.4200.4200.4360.6820.7660

Nominal Size1/161/81/43/81/23/41

1-1/41-1/2

22-1/2

3

Nominal Size 1/16 27 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 2-1/2 8 3 8

Tol.Minus.001.001.001.001.001.001.001.001.001.001.002.002

Full Length(Min) L2

.26113

.26385

.40178

.40778

.53371

.54571

.68278

.70678

.72348

.756521.137501.20000

L1 + L2

.2711

.2726

.3945

.4067

.53435533.6609.6809.6809.6969

1.05701.1410

Length Member L1, and L3

L1 Ring GageMember Only

L2 Ring GageMember Only

taper pipe gages - NptF product group #19-00tpF

Tol.Minus.001.001.001.001.001.001.001.001.001.001.002.002

HandleNo.123344555566

Nominal Size1/161/81/43/81/23/41

1-1/41-1/2

22-1/2

3

AOutside

Diameter1-1/81-1/81-3/81-1/21-3/4

22-1/2

33-1/43-3/44-1/4

5

L1Thin

.1600

.1615

.2278

.2400

.3200

.3390

.4000

.4200

.4200

.4360

.6820

.7660

L2Thick

.26113

.26385

.40178

.40778

.53371

.54571

.68278

.70678

.72348

.756521.137501.20000

Tol.Plus.001.001.001.001.001.001.001.001.001.001.002.002

Thickness


Price $238.98

230.39 238.98 251.86 261.87 287.63 313.39 343.44 376.35 439.32 528.04 619.62

NPTF 6 Step Plug Gage Member Only w/Handle


Price $173.15

173.15 173.15 173.15 173.15 183.17 198.91 223.24 246.13 343.44 518.02 565.25


Price $184.60

184.60 184.60 184.60 184.60 194.62 211.79 236.12 259.01 356.32 535.19 582.42

NPTF6 Step Ring Gage


Price $284.77

284.77 284.77 284.77 284.77 319.11 319.11 323.41 370.63 450.77 539.49 648.24


Price $115.91

81.57 97.31

115.91 131.65 145.96 160.27 181.74 206.06 246.13 326.27 393.53

Nominal Size 1/16 27 1/8 27 1/4 18 3/8 18 1/2 14 3/4 14 1 11-1/2 1-1/4 11-1/2 1-1/2 11-1/2 2 11-1/2 2-1/2 8 3 8

Member Only w/HandleItem No.

M7011641M7011651M7011661M7011671M7011681M7011691M7011701M31100851M31100951M31101051M31101151M31101251

Price $127.36

93.02 108.76 127.36 143.10 157.41 173.15 194.62 218.94 259.01 343.44 410.70

L3 Plug Gage Member Only w/Handle


Price $115.91

81.57 97.31

115.91 131.65 145.96 160.27 181.74 206.06 246.13 326.27 393.53


Price $127.36

93.02 108.76 127.36 143.10 157.41 173.15 194.62 218.94 259.01 343.44 410.70

L1 & L3


Price$243.27 174.58 206.06 243.27 274.75 303.37 333.42 376.35 425.01 505.14 669.71 804.22

L1 Plug Gage

• Plug Dimensions • Ring Dimensions

43

60 degree thread 3-wire sets with holders

2 0.96000 M706030 0.86400 M703030 0.84000 M704030 0.72000 M707030 $103.03 2-1/2 0.76800 M706029 0.69120 M703029 0.67200 M704029 0.57600 M707029 103.03 3 0.64000 M706028 0.57600 M703028 0.56000 M704028 0.48000 M707028 103.03 4 0.48000 M706027 0.43200 M703027 0.42000 M704027 0.36000 M707027 103.03 5 0.38400 M706026 0.34560 M703026 0.33600 M704026 0.28800 M707026 71.55 6 0.32000 M706025 0.28800 M703025 0.28000 M704025 0.24000 M707025 71.55 7 0.27428 M706024 0.24686 M703024 0.24000 M704024 0.20571 M707024 71.55 8 0.24000 M706023 0.21600 M703023 0.21000 M704023 0.18000 M707023 55.81 9 0.21333 M706022 0.19200 M703022 0.18666 M704022 0.16000 M707022 55.81 10 0.19210 M706021 0.17280 M703021 0.16800 M704021 0.14400 M707021 55.81 11 0.17454 M706020 0.15709 M703020 0.15273 M704020 0.13091 M707020 55.81 12 0.16000 M706019 0.14400 M703019 0.14000 M704019 0.12000 M707019 55.81 14 0.13714 M706018 0.12343 M703018 0.12000 M704018 0.10286 M707018 55.81 16 0.12000 M706017 0.10800 M703017 0.10500 M704017 0.09000 M707017 55.81 18 0.10667 M706016 0.09600 M703016 0.09333 M704016 0.08000 M707016 55.81 20 0.09600 M706015 0.08640 M703015 0.08400 M704015 0.07200 M707015 55.81 22 0.08727 M706014 0.07855 M703014 0.07636 M704014 0.06545 M707014 55.81 24 0.08000 M706013 0.07200 M703013 0.07000 M704013 0.06000 M707013 55.81 28 0.06857 M706012 0.06171 M703012 0.06000 M704012 0.05143 M707012 55.81 32 0.06000 M706011 0.05400 M703011 0.05250 M704011 0.04500 M707011 55.81 36 0.05333 M706010 0.04800 M703010 0.04667 M704010 0.04000 M707010 55.81 40 0.04800 M706009 0.04320 M703009 0.04200 M704009 0.03600 M707009 55.81 48 0.04000 M706008 0.03600 M703008 0.03500 M704008 0.03000 M707008 55.81 64 0.03000 M706007 0.02700 M703007 0.02625 M704007 0.02250 M707007 55.81 72 0.02667 M706006 0.02400 M703006 0.02333 M704006 0.02000 M707006 55.81 80 0.02400 M706005 0.02160 M703005 0.02100 M704005 0.01800 M707005 55.81 96 0.02000 M706004 0.01800 M703004 0.01750 M704004 0.01500 M707004 55.81 100 0.01920 M706003 0.01728 M703003 0.01680 M704003 0.01440 M707003 55.81 120 0.01600 M706002 0.01440 M703002 0.01400 M704002 0.01200 M707002 87.29 128 0.01500 M706001 0.01350 M703001 0.01312 M704001 0.01125 M707001 87.29 200 0.00960 M706000 0.00864 M703000 0.00840 M704000 0.00720 M707000 87.29

gear measuriNg wires

• All Gear Measuring Wires meet or exceed Former Fed. Spec. GGG-W-366b for Grade AM.G.W.• For three wire sets, add 50%.• For modifications to Gear Wires, prices furnished upon request.• For Carbide Gear Wires, prices furnished upon request.• Metric Module sets available upon request.

Wire Diameter forEnlarged Pinions

1.92” P Item No.

Wire Diameter forExternal Gears

1.728” P Item No.P

AlternateSeries1.68”

P Item No.

Wire Diameter for Internal Gears

1.44”P Item No.

Price(Set

of TwoWires)

product group #17-00

• Wires are lapped to 2 RMS micro inch finish or less and measure to exacting specifications.

grade a master gear wires

44

gear measuriNg wires

product group #17-10special gear measuriNg wires +/-.000010

Range Above / To

.004 - .005” / .1016 mm - .1270 mm $141.67

.005 - .007” / .1270 mm - .1778 mm 141.67

.007 - .010” / .1778 mm - .2540 mm 110.19

.010 - .135” / .2540 mm - 3.429 mm 110.19

.135 - .260” / 3.429 mm - 6.604 mm 110.19

.260 - .385” / 6.604 mm - 9.779 mm 110.19

.385 - .510” / 9.779 mm - 12.954 mm 110.19

.510 - .635” / 12.954 mm - 16.129 mm 110.19

.635 - .760” / 16.129 mm - 19.304 mm 141.67

.760 - 1.010” / 19.304 mm - 25.654 mm 141.67

Price(Set of Two Wires)

product group #17-00Flatted gear wiresPitch Flatting Price Per Set2 thru 48 57.24

Price is for flatting each of two wires to 80% of wire diameter.For depth of flat exceeding 20% diameter, a quotation is required.For special gear wires, use price for flatting which is closest to standard diameters.

Be sure to protect your gages from heat and moisture. After use, each gage should be wiped clean of fingerprints and contaminants, and then oiled with a rust inhibitor. We recommend Tri Flow lubricant for gage maintenance.

6 oz. Aerosol Can $8.59 each

preserVatiVe & luBricaNt

45

3-wire thread measuriNg system

wire holders - The wire holders are fitted on anvils of the micrometer allowing the single and double measuring wires to accurately position in relation to each other. The extra length of the wire enables them to be adjusted up or down in the holders. This extends the life of the wires substantially. The holders are limited to their rotational movement by the “U” Track and thus are maintained in the ideal position for engaging any lead angle of a thread.

measuring wires - The measuring wires are certified to meet the following specifications: Diameter: +/-.000020” Roundness: +/-.000010” Surface Finish: 2 Micro Inches

All measuring wires come with a certificate of calibration, which includes the actual wire size and the constant required in determining the pitch diameter.

product group #16-20h 60 degree thread 3-wire sets with holders

80 0.00722 M910325 M910326 M910327 $224.67 M730800 $313.39 72 0.00802 M910319 M910320 M910321 224.67 M730720 313.39 64 0.00902 M910313 M910314 M910315 208.93 M730640 297.65 56 0.01031 M910306 M910307 M910308 208.93 M730560 297.65 50 0.01155 M910303 M910304 M910305 208.93 M730500 297.65 48 0.01203 M910296 M910297 M910298 208.93 M730480 297.65 44 0.01312 M910293 M910294 M910295 208.93 M730440 297.65 40 0.01443 M910290 M910291 M910292 190.32 M730400 238.98 36 0.01604 M910283 M910284 M910285 190.32 M730360 238.98 32 0.01804 M910280 M910281 M910282 190.32 M730320 238.98 30 0.01925 M910277 M910278 M910279 190.32 M730300 238.98 28 0.02062 M910268 M910269 M910270 190.32 M730280 238.98 27 0.02138 M910265 M910266 M910267 190.32 M730270 238.98 26 0.02221 M910262 M910263 M910264 190.32 M730260 238.98 24 0.02406 M910259 M910260 M910261 190.32 M730240 238.98 22 0.02624 M910256 M910257 M910258 190.32 M730220 238.98 20 0.02887 M910253 M910254 M910255 190.32 M730200 238.98 18 0.03208 M910244 M910245 M910246 190.32 M730180 238.98 16 0.03608 M910241 M910242 M910243 190.32 M730160 238.98 14 0.04124 M910238 M910239 M910240 190.32 M730140 238.98 13 0.04441 M910235 M910236 M910237 190.32 M730130 238.98 12 0.04811 M910232 M910233 M910234 190.32 M730120 238.98 11-1/2 0.05020 M910226 M910227 M910228 190.32 M730115 238.98 11 0.05249 M910229 M910230 M910231 190.32 M730110 238.98 10 0.05774 M910223 M910224 M910225 190.32 M730100 238.98 9 0.06415 M910331 M910332 M910333 190.32 M730090 238.98 8 0.07217 M910328 M910329 M910330 190.32 M730080 238.98 7 0.08248 M910322 M910323 M910324 190.32 M730070 238.98 6 0.09623 M910316 M910317 M910318 190.32 M730060 238.98 5 0.11547 M910309 M910310 M910311 224.67 M730050 313.39 When ordering, specify “Threads Per Inch” and Anvil Size.

Threads Nominal Holder Only Item Nos. Holders w/WiresPer Inch Diameter .250 Anvil .300 Anvil .375 Anvil Price Item No. Set Price

46

3-wire thread measuriNg system

product group #16-20h 60 degree metric thread wire sets with holders

When ordering, specify “Pitch” and Anvil Size. Individual Holders available, price on application.

product group #16-00s thread measuriNg wire sets Wooden Case Wooden Case No Wire Holders w/Wire Holders Item No. Price Item No. Price

Wire Size Holder Only Item No. Holders w/WiresPitch mm Best mm Inch Equiv. .250” Anvil .300” Anvil .375” Anvil Price Item No. Set

.35mm 0.2021 0.00796 M910175 M910176 M910177 $224.67 M740350 $332.19 .40mm 0.2309 0.00909 M910184 M910185 M910186 224.67 M740400 332.19 .45mm 0.2598 0.01023 M910181 M910182 M910183 208.93 M740450 315.51 .50mm 0.2887 0.01137 M910190 M910191 M910192 208.93 M740500 315.51 .55mm 0.3175 0.01250 M910187 M910188 M910189 208.93 M740550 315.51 .60mm 0.3464 0.01364 M910193 M910194 M910195 208.93 M740600 315.51 .70mm 0.4041 0.01591 M910199 M910200 M910201 208.93 M740700 315.51 .75mm 0.4330 0.01705 M910196 M910197 M910198 190.32 M740750 253.32 .80mm 0.4619 0.01819 M910205 M910206 M910207 190.32 M740800 253.32 .85mm 0.4907 0.01932 M910202 M910203 M910204 190.32 M740850 253.32 .90mm 0.5196 0.02046 M910208 M910209 M910210 190.32 M740900 253.32 1.00mm 0.5774 0.02273 M910211 M910212 M910213 190.32 M741000 253.32 1.25mm 0.7217 0.02841 M910214 M910215 M910216 190.32 M741250 253.32 1.50mm 0.8660 0.03409 M910217 M910218 M910219 190.32 M741500 253.32 1.75mm 1.0104 0.03978 M910220 M910221 M910222 190.32 M741750 253.32 2.00mm 1.1547 0.04546 M910247 M910248 M910249 190.32 M742000 253.32 2.50mm 1.4434 0.05683 M910250 M910251 M910252 190.32 M742500 253.32 3.00mm 1.7321 0.06819 M910271 M910272 M910273 190.32 M743000 253.32 3.50mm 2.0270 0.07980 M910274 M910275 M910276 190.32 M743500 253.32 4.00mm 2.3094 0.09092 M910286 M910287 M910288 190.32 M744000 253.32

60 degree thread measuring wires

Set No. 30 HS*30 sizes (5 to 80 TPI), with case M396890 $2,172.26 M396895 $7,813.26 Set No. 34 HS34 sizes (4 to 80 TPI), with case M396920 $2,580.09 M396925 $8,886.51 Set No. 20 HS*20 sizes (6 to 36 TPI), with case M396880 $1,340.85 M396980 $4,894.02 Set No. 20 TC Price on Price On20 sizes (6 to 36 TPI), with case M396990 Request M396995 Request

60 degree metric thread measuring wires

Set No. 30 M30 sizes (.2 pitch to 10 pitch), with case M396910 $2,677.40 M396915 $8,404.26 Set No. 23M23 sizes (.3 pitch to 6 pitch), with case M396900 $1,933.28 M396905 $6,237.73

29 degree acme Best threads

Set No. 22AB22 sizes (1 to 20 TPI), with case M397000 $2,391.20 N/A** Set No. 16AB16 sizes (3-1/2 to 20 TPI), with case _ _ M397005 $5,140.15 *7-1/2 & 22 TPI not included in these sets. All sets include Certification of Calibration.**Not all sizes available.Case and vials are available, price on request.

47

The Meyer Gage flexible hole location gage is slotted at 90° increments to insurepositive location on the threads flank regardless of hole size. Other commonly used location plugs must be inserted so that the shoulder is flush with a locating face,resulting in squareness deviation transferred to centerline measurement.

• For inspection of the location of a threaded hole in a part.• Due to slotted 90 degree design hole location gage locates positively on flank of parts threaded hole.• Sizes #10 and smaller or M5 and smaller are of solid construction, with front taper to cover the entire product tolerance.• For use in determining centerline to centerline distances of threaded holes.

FleXiBle hole locatioN gages

FleXiBle hole locatioN gages

Item No.M487500M487600M487700M487800M488000M488300M488500

SizeM4 X 0.7M5 X 0.8M6 X 1M8 X 1.25M10 X 1.5M12 X 1.75M12 X 1.25

Price $125.93

120.20 107.33 107.33 110.19 114.48 120.20

Metric Measurementsproduct group #19-00hl

UnifiedSize

011223344556688

101012121/41/4

5/165/163/83/8

7/167/161/21/2

9/169/165/85/83/43/47/87/811

/ Inch MeausrementsThreads Per Inch 80 UNF 64 UNC 72 UNF 56 UNC 64 UNF 48 UNC 56 UNF 40 UNC 48 UNF 40 UNC 44 UNF 32 UNC 40 UNF 32 UNC 36 UNF 24 UNC 32 UNF 24 UNC 28 UNF 20 UNC 28 UNF 18 UNC 24 UNF 16 UNC 24 UNF 14 UNC 20 UNF 13 UNC 20 UNF 12 UNC 18 UNF 11 UNC 18 UNF 10 UNC 16 UNF 9 UNC 14 UNF 8 UNC 12 UNF

Item M480100M480200M480300M480400M480500M480600M480700M480900M481000M481100M481200M481300M481400M481500M481600M481700M481800M481900M482000M482200M482300M482500M482600M482800M482900M483100M483200M483400M483500M483700M483800M484000M484100M484400M484500M484800M484900M485200M485300

Price $118.77

113.05 113.05 110.19 110.19 105.89 105.89 98.74 98.74

107.33 107.33 108.76 108.76 103.03 103.03 100.17 100.17 98.74 98.74 88.72 88.72 88.72 88.72 94.45 94.45 93.02 93.02 97.31 97.31 95.88 95.88 98.74 98.74

104.46 104.46 123.07 123.07 173.15 173.15

+/-.0001.2500

48

Certificate of Calibration(long form)Furnished with readings that are 5 decimal places to the right ofthe decimal point. These readings include 3 measurements pergage performed at the center and 1/16” in from the edge of theradius at both ends of the gage. Serial numbers are recorded ongagepins over .060”. Included is a tamper proof sticker withpaper certificate.

New Gages Used Gages*Class ZZ or Z Pin Sets $ 1.38 per pin $ 2.20 per pinClass ZZ or Z individual pins $ 2.20 per pin $ 2.20 per pinClass X or XX Pin Sets $11.00 per pin $16.50 per pinClass X or XX individual pins $16.50 per pin $27.50 per pinTrilocks (all classes) $27.50 per gage $33.00 per gageTaper Locks (all classes) $27.50 per gage $33.00 per gageRing Gages (all classes) $27.50 per gage Call for PriceSpecial Lengths Class ZZ $ 2.20 per gage $ 2.20 per gageSpecial Length Class X $16.50 per gage $27.50 per gage

* RMA number required on all used gages sent in for calibration.Please contact our Customer Service Department for authorization.

Calibration Price List:

49

Certificate of Class/Conformance (compliance)This certificate states that a specific gage or set of gages hasbeen inspected by comparison with Master Gages traceable tothe National Institute of Standards & Technology and found to bewithin the required tolerance. This certificate does not give exactsize. Certificates of Conformance are available on new gagesonly. Certificate of Conformance certifies that a gage as listed iswithin proper tolerances and proper physical condition. FurnishedFREE with all orders from Meyer Gage.

THREAD WIRE & GEAR WIRE PRODUCTS Used

$27.88 27.88

27.88 27.88 27.88

Thread Measuring Wires (set 3) Special TPIMaster Thread Wires (1 Master Wire per pitch)Gear Measuring Wires (set 2) Special Pitch, Gear Wires

New$17.88 17.88

17.88 17.88 17.88

THREADED PRODUCTS Used

$36.13 40.25 51.25 40.25 47.13 65.00

Thread Plugs up to 1-1/2” Thread Plugs over 1-1/2 to 4” Thread Plugs over 4” Thread Rings up to 1-1/2” Thread Rings over 1-1/2 to 4” Thread Rings over 4”

New $15.13

22.0033.0015.1322.0046.75

PIPE PRODUCTS LONG FORM CERTIFICATE Used

$51.25 58.13 51.25 58.13

Pipe Plugs to 2” Pipe Plugs over 2” Pipe Rings to 2” Pipe Rings over 2”

New$41.2548.1341.2548.13

For:YOUR COMPANY NAME123 MAIN STREETANY TOWN, ST 00000-0000

PLUGS & RING GAGES

LONG FORM CALIBRATION PRICE LIST

Calibrations Traceable to NISTCertificate of Calibration (long form certificate) gives exact size tospecified tolerance. Certificates of Calibration are available withnew or used gages after inspection. Calibration Certificates showactual gage measurements. Each certificate is numbered tomatch a number we etch on the gage providing traceabilitybetween the gage and the Cert. where gage size permits.

RANGE CLASSXX X Y Z ZZ

.0009” to .8250” .000020” .000040” .000070” .000100” .000200”

.8251” to 1.5100” .000030” .000060” .000090” .000120” .000240”1.5101” to 2.5100” .000040” .000080” .000120” .000160” .000320”2.5101” to 4.5100” .000050” .000100” .000150” .000200” .000400”4.5101” to 6.5100” .000065” .000130” .000190” .000250” .000500”6.5101” to 9.0100” .000080” .000160” .000240” .000320” .000640”9.0101” to 12.2600” .000100” .000200” .000300” .000400” .000800”

0.21mm to 21.00mm .0005mm .0010mm .0018mm .0025mm .0050mm21.01mm to 38.00mm .0008mm .0015mm .0023mm .0030mm .0060mm38.01mm to 64.00mm .0010mm .0020mm .0030mm .0040mm .0080mm64.01mm to 115.00mm .0013mm .0025mm .0038mm .0050mm .0100mm115.01mm to 165.00mm .0017mm .0033mm .0048mm .0060mm .0130mm165.01mm to 230.00mm .0020mm .0041mm .0061mm .0080mm .0160mm230.01mm to 300.00mm .0025mm .0051mm .0076mm .0100mm .0200mm

Plug GageMeasuring - the art of using pre-sized precision metalplugs to determine the acceptability of diameters of drilled ormachined holes.

GO/NOGOMeasurement - AGO gage is used to check the lowerlimit of a hole. ANOGO gage is used to check the upper limit of ahole. If the GO gage enters the hole and the NOGO gage is unable toenter, the design specifications of the hole have been met.

Uses - for precision GO/NOGOmeasuring of hole sizes and depths,checking hole location and distance, and setting micrometers. Allgages are uniformly 2” long with ground ends, allowing you to useboth ends for increased gage life. Gages are Carbon ChromeAlloySteel (grade 52100 bearing quality steel) and heat treated to a 60-62Rockwell C hardness. All of our products come with a Certificate ofClass Conformance, traceable toNIST (National Institute forStandards Technology). The size and “+” (GO) or “-” (NOGO) arelaser etched with a Meyer Exclusive Serial Number feature to ensuretraceability on your shop floor on all gages that are .061” and larger.

Class ZZ Gages - These gages have an inch tolerance of .0002” and ametric tolerance of .005mm. They are practical where good precisionand speed are important.

Class Z Gages - These gages have an inch tolerance of .0001” and ametric tolerance of .0025mm. They are one half the deviation of theZZ for a better fit.

Class X Gages - These gages are available with an inch tolerance of.00004” and a metric tolerance of .001mm. These gages are usedwhere greater precision is needed.

TheABC’s of Plug Gages

GageMakers Tolerance ChartPlain Plug, Plain Ring & Master Gage Tolerances

INCH

METRIC

Class XX Gages - These gages have an inch tolerance of .00002” anda metric tolerance of .0005mm. They are one half of the deviation ofthe X. Great for your most critical needs.

Length and Finish - All gages are 2 inches or 51mm long withground ends for long life.

52100 Steel - This is bearing quality, Carbon ChromeAlloy Steel,heat treated to 60-62 Rockwell C hardness and is considered thepreferred material for the highest quality plug gages.

Certificate of Class Conformance -Assurance issued with eachshipment of quality gages that conformance characteristics aretraceable to NIST.

NIST -National Institute of Standards and Technology

Serial Number Etching - A feature that is exclusive to Meyer Gagesand essential in assuring traceability on the shop floor on all gagesover .060”.

Information on How to Take Careof your Meyer Gage

Clean the part before gaging.Get rid of dirt, coolant,

and chips.

Do not force the gage.Use light pressure.

Protect the gage from damage.Nicks and burrs allowinaccurate results.

Keep gages clean and oiled.This increases wear life.

Avoid handling gaging surfaces.Fingerprints cause rust.

50

51

taBle oF thread pitch diameter limits

Nominal SizeThreads Per Inch

and Series0 (.060) - 80 NF

1 (.073) - 64 NC

1 (.073) - 72 NF

2 (.086) - 56 NC

2 (.086) - 64 NF

3 (.099) - 48 NC

3 (.099) - 56 NF

4 (.112) - 40 NC

4 (.112) - 48 NF

5 (.125) - 40 NC

5 (.125) - 44 NF

6 (.138) - 32 NC

6 (.138) - 40 NF

8 (.164) - 32 NC

8 (.164) - 36 NF

10 (.190) - 24 NC

10 (.190) - 32 NF

12 (.216) - 24 NC

12 (.216) - 28 NF

12 (.216 )- 32 NEF

1/4” - 20 NC

1/4” - 28 NF

1/4” - 32 NEF

5/16” - 18 NC

5/16” - 24 NF

5/16” - 32 NEF

3/8” - 16 NC

3/8” - 24 NF

3/8” - 32 NEF

7/16” - 14 NC

7/16” - 20 NF

7/16” - 28 NEF

1/2” - 13 NC

1/2” - 20 NF

1/2” - 28 NEF

1A

.2164

.2108

.2258

.2208

.2752

.2691

.2843

.2788

.3331

.3266

.3468

.3411

.3897

.3826

.4037

.3975

.4485

.4411

.4662

.4598

2A .0514.0496.0623.0603.0634.0615.0738.0717.0753.0733.0848.0825.0867.0845.0950.0925.0978.0954.1080.1054.1095.1070.1169.1141.1210.1184.1428.1399.1452.1424.1619.1586.1688.1658.1879.1845.1918.1886.1948.1917.2164.2127.2258.2225.2287.2255.2752.2712.2843.2806.2912.2880.3331.3287.3468.3430.3537.3503.3897.3850.4037.3995.4132.4096.4485.4435.4662.4619.4757.4720

3A .0519.0506.0629.0614.0640.0626.0744.0728.0759.0744.0855.0838.0874.0858.0958.0939.0985.0967.1088.1069.1102.1083.1177.1156.1218.1198.1437.1415.1460.1439.1629.1604.1697.1674.1889.1863.1928.1904.1957.1933.2175.2147.2268.2243.2297.2273.2764.2734.2854.2827.2922.2898.3344.3311.3479.3450.3547.3522.3911.3876.4050.4019.4143.4116.4500.4463.4675.4643.4768.4740

UnifiedSeries

2 .0519.0502.0629.0610.0640.0622.0744.0724.0759.0740.0855.0833.0874.0854.0958.0934.0985.0963.1088.1064.1102.1079.1177.1150.1218.1194.1437.1410.1460.1435.1629.1696.1697.1670.1889.1856.1928.1897.1957.1926.2175.2139.2268.2237.2297.2265.2764.2723.2854.2821.2922.2889.3344.3299.3479.3446.3547.3513.3911.3862.4050.4014.4143.4107.4500.4448.4675.4639.4768.4731

3 .0519.0506.0629.0615.0640.0627.0744.0729.0759.0745.0855.0839.0874.0859.0958.0941.0985.0969.1088.1071.1102.1086.1177.1158.1218.1201.1437.1418.1460.1442.1629.1605.1697.1678.1889.1865.1928.1906.1957.1935.2175.2149.2268.2246.2297.2275.2764.2734.2854.2830.2922.2899.3344.3312.3479.3455.3547.3523.3911.3875.4050.4024.4143.4118.4500.4463.4675.4649.4768.4742

NationalSeries

Thread Ring Gages (External Threads)

Basic P.D.

.0519

.0629

.0640

.0744

.0759

.0855

.0874

.0958

.0985

.1088

.1102

.1177

.1218

.1437

.1460

.1629

.1697

.1889

.1928

.1957

.2175

.2268

.2297

.2764

.2854

.2922

.3344

.3479

.3547

.3911

.4050

.4143

.4500

.4675

.4768

1B

.2175

.2248

.2268

.2333

.2764

.2843

.2854

.2925

.3344

.3429

.3479

.3553

.3911

.4003

.4050

.4131

.4500

.4597

.4675

.4759

2B .0519.0542.0629.0655.0640.0665.0744.0772.0759.0786.0855.0885.0874.0902.0958.0991.0985.1016.1088.1121.1102.1134.1177.1214.1218.1252.1437.1475.1460.1496.1629.1672.1697.1736.1889.1933.1928.1970.1957.1998.2175.2224.2268.2311.2297.2339.2764.2817.2854.2902.2922.2964.3344.3401.3479.3528.3547.3591.3911.3972.4050.4104.4143.4189.4500.4565.4675.4731.4768.4816

3B .0519.0536.0629.0648.0640.0659.0744.0765.0759.0779.0855.0877.0874.0895.0958.0982.0985.1008.1088.1113.1102.1126.1177.1204.1218.1243.1437.1465.1460.1487.1629.1661.1697.1726.1889.1922.1928.1959.1957.1988.2175.2211.2268.2300.2297.2328.2764.2803.2854.2890.2922.2953.3344.3387.3479.3516.3547.3580.3911.3957.4050.4091.4143.4178.4500.4548.4675.4717.4768.4804

UnifiedSeries

2 .0519.0536.0629.0648.0640.0658.0744.0764.0759.0778.0855.0877.0874.0894.0958.0982.0985.1007.1088.1112.1102.1125.1177.1204.1218.1242.1437.1464.1460.1485.1629.1662.1697.1724.1889.1922.1928.1959.1957.1988.2175.2211.2268.2299.2297.2329.2764.2805.2854.2887.2922.2955.3344.3389.3479.3512.3547.3581.3911.3960.4050.4086.4143.4179.4500.4552.4675.4711.4768.4805

3 .0519.0532.0629.0643.0640.0653.0744.0759.0759.0773.0855.0871.0874.0889.0958.0975.0985.1001.1088.1105.1102.1118.1177.1196.1218.1235.1437.1456.1460.1478.1629.1653.1697.1716.1889.1913.1928.1950.1957.1979.2175.2201.2268.2290.2297.2319.2764.2794.2854.2878.2922.2945.3344.3376.3479.3503.3547.3571.3911.3947.4050.4076.4143.4168.4500.4537.4675.4701.4768.4794

NationalSeries

Thread Plug Gages (Internal Threads)

taBle oF thread pitch diameter limits

Nominal SizeThreads Per Inch

and Series9/16” - 12 NC

9/16” - 18 NF

9/16” - 24 NEF

5/8” - 11 NC

5/8” - 18 NF

5/8” - 24 NEF

11/16” - 24 NEF

3/4” - 10 NC

3/4” - 16 NF

3/4” - 20 NEF

13/16” - 20 NS

7/8” - 9 NC

7/8” - 14 NF

7/8” - 20 NEF

15/16” - 20 NS

1” - 8 NC

1” - 12 UNF

1” - 20 NEF

11/16” - 18 NS

1-1/8” - 7 NC

1-1/8” - 12 NF

1-1/8” - 18 NEF

1-3/16” - 18 NEF

1-1/4” - 7 NC

1-1/4” - 12 NF

1-1/4” - 18 NEF

1-5/16” - 18 NEF

1-3/8” - 6 NC

1-3/8” - 12 NF

1-3/8” - 18 NEF

1-7/16” - 18 NEF

1-1/2” - 6 NC

1-1/2” - 12 NF

1-1/2” - 18 NEF

1A.5068.4990.5250.5182

.5644

.5561

.5875

.5805

.6832

.6744

.7079

.7004

.8009

.7914

.8270

.8189

.9168

.9067

.9441

.9353

1.03001.01911.06911.0601

1.15501.14391.19411.1849

1.26431.25231.31901.3096

1.38931.37721.44401.4344

2A .5068.5016.5250.5205.5342.5303.5644.5589.5875.5828.5967.5927.6592.6552.6832.6773.7079.7029.7162.7118.7787.7743.8009.7946.8270.8216.8412.8368.9036.8991.9168.9100.9441.9382.9661.9616

1.02501.02031.03001.02281.06911.06311.08751.08281.14991.14501.15501.14761.19411.18791.21241.20751.27491.27001.26431.25631.31901.31271.33741.33251.39991.39491.38931.38121.44401.43761.46241.4574

3A .5084.5045.5264.5230.5354.5325.5660.5619.5889.5854.5979.5949.6604.6574.6850.6806.7094.7056.7175.7142.7800.7767.8028.7981.8286.8245.8425.8392.9050.9016.9188.9137.9459.9415.9675.9641

1.02641.02281.03221.02681.07091.06641.08891.08531.15141.14781.15721.15171.19591.19131.21391.21031.27641.27281.26671.26071.32091.31621.33891.33531.40141.39771.39171.38561.44591.44111.46391.1402

UnifiedSeries

2 .5084.5028.5264.5223.5354.5314.5660.5601.5889.5848.5979.5938.6604.6563.6850.6786.7094.7049.7175.7129.7800.7754.8028.7958.8286.8237.8425.8378.9050.9003.9188.9112.9459.9403.9675.9627

1.02641.02131.03221.02371.07091.06531.08891.08371.15141.14621.15721.14871.19591.19031.21391.20861.27641.27111.26671.25661.32091.31531.33891.33351.40141.39601.39171.38161.44591.44031.46391.4584

3 .5084.5044.5264.5234.5354.5326.5660.5618.5889.5859.5979.5950.6604.6575.6850.6805.7094.7062.7175.7143.7800.7768.8028.7979.8286.8250.8425.8392.9050.9017.9188.9134.9459.9419.9675.9641

1.02641.02281.03221.02631.07091.06691.08891.08531.15141.14781.15721.15131.19591.19191.21391.21021.27641.27271.26671.25961.32091.31691.33891.33511.40141.39761.39171.38461.44591.44191.46391.4601

NationalSeries

Thread Ring Gages (External Threads)

Basic P.D.

.5084

.5264

.5354

.5660

.5889

.5979

.6604

.6850

.7094

.7175

.7800

.8028

.8286

.8425

.9050

.9188

.9459

.9675

1.0264

1.0322

1.0709

1.0889

1.1514

1.1572

1.1959

1.2139

1.2764

1.2667

1.3209

1.3389

1.4014

1.3917

1.4459

1.4639

1B.5084.5186.5264.5353

.5660

.5767

.5889

.5980

.6850

.6965

.7094

.7192

.8028

.8151

.8286

.8392

.9188

.9320

.9459

.9573

1.03221.04631.07091.0826

1.51721.17161.19591.2079

1.26671.28221.32091.3332

1.39171.40751.44591.4584

2B .5084.5152.5264.5323.5354.5405.5660.5732.5889.5949.5979.6031.6604.6656.6850.6927.7094.7159.7175.7232.7800.7857.8028.8110.8286.8356.8425.8482.9050.9109.9188.9276.9459.9535.9675.9734

1.02641.03261.03221.04161.07091.07871.08891.09511.15141.15771.15721.16681.19591.20391.21391.22021.27641.28271.26671.27711.32091.32911.33891.34521.40141.40791.39171.40221.44591.45421.46391.4704

3B .5084.5135.5264.5308.5354.5392.5660.5714.5889.5934.5979.6018.6604.6643.6850.6907.7094.7143.7175.7218.7800.7843.8028.8089.8286.8339.8425.8468.9050.9094.9188.9254.9459.9516.9675.9719

1.02641.03101.03221.03931.07091.07681.08891.09351.15141.15611.15721.16441.19591.20191.21391.21861.27641.28111.26671.27451.32091.23701.33891.34361.40141.40621.39171.39961.44591.45221.46391.4687

UnifiedSeries

2 .5084.5140.5264.5305.5354.5394.5660.5719.5889.5930.5979.6020.6604.6645.6850.6914.7094.7139.7175.7221.7800.7846.8028.8098.8286.8335.8425.8472.9050.9097.9188.9264.9459.9515.9675.9723

1.02641.03151.03221.04071.07091.07651.08891.09411.15141.15661.15721.16571.19591.20151.21391.21921.27641.28171.26671.27681.32091.32651.33891.34431.40141.40681.39171.40181.44591.45151.46391.4694

3 .5084.5124.5264.5294.5354.5382.5660.5702.5889.5919.5979.6008.6604.6633.6850.6895.7094.7126.7175.7207.7800.7832.8028.8077.8286.8322.8425.8458.9050.9083.9188.9242.9459.9499.9675.9609

1.02641.03001.03221.03811.07091.07491.08891.09251.15141.15501.15721.16311.19591.19991.21391.21761.27641.28011.26671.27381.32091.32491.33891.34271.40141.40521.39171.39881.44591.44991.46391.4677

NationalSeries

Thread Plug Gages (Internal Threads)

52

PLUG GAGE USEwhen using plug gages for go no-go inspection the go member should fit into the work piece to indicate to the operator that the component meets the correct specifications. the no-go member should not fit into the work piece. if it does this indicates to the operator that the component has been machined incorrectly and is out of specification.

For this reason the go gage is usually selected close but above the lower limit size of the component and the no-go gage is usually selected just under the high limit of the component.

For example: a component that has a size specification of .250” to .255”. the go gage in this example may be selected to be a .250” plus gage pin and the no-go pin gage selected as a .255” minus plug gage.

these gages if class z will range from .250” to .2501” for the go and the minus gage will fall within a toler-ance range size of .255” to .2549”.

the use of the go and no-go gages are used to inspect the component for a pass or fail process only, and will not measure the exact size of the hole or slot in the component. as in the above example some “good parts” can actually fail the go no-go test if they fall below the actual gage size within the tolerance or class of the gage. Below is described a standard practice for selection of the class of tolerance gage pins with a certain tolerance component.

Plug Gage Tolerance & Selectionstandard practice in american industry is to allow 5% of the component hole tolerance for the go gage tolerance and 5% for the nogo gage tolerance. the go gage, whose nominal size is at the low limit of the hole to be checked is generally given a plus tolerance in order to insure that all parts accepted fall within the product tolerance. For the same reason the nogo gage, whose nominal is at the high limit of the product tolerance, is given a minus tolerance. in this age of strict product liability perhaps it is better to reject a few acceptable parts than to pass any out-of-tolerance parts. the go gage plus tolerance and the nogo minus tolerance have become universal in american industry and 10% of the hole tolerance - 5% at each end - is sacrificed to insure that all pieces accepted are within tolerance. there can be several reasons for using finer or coarser tolerances that the 10% rule would dictate. in a case where the production process is such that a significant number of acceptable parts are expected to fall in either of the 5% areas of product tolerance which may be rejected due to gage tolerance, a tighter tolerance should be considered. the value of these parts or the effort necessary to re-inspect them weighed against the cost of a finer gage such as class X, class XX or class XXX, can more than justify the cost of the finer toler-ance.

53

What Plug Gages Are…Used to inspect holes or slot for pass or fail 1. conditions only.

Used as masters for setting micrometers, 2. verniers, or calipers.

What Plug Gages Are Not…1. resizing tools, or reamers.

2. De bur tools, or clean out tools.

3. Used to measure the exact or actual size.

54

O.D. Comparatorour o.D. comparator is one of the most rugged in the industry. with a 4.75” (120.6 mm) capacity is can handle most task. the trendsetter ii electronic column amplifier detects and captures the dynamic peak of cylindrical parts instantly and accurately. cylindrical pieces are simply and quickly rolled or passed beneath the measuring contacts of our single-head comparator. this measuring system is suited for close tolerance applica-tions featuring selectable scales starting at .0002” full scale with .000002” resolution. enhancing its versatility, the trendsetter ii can operate in either english or Metric modes.

Call for Price

Metrology Equipment

Internal / External Diameter Comparatorperhaps this comparator is the backbone of many calibration labs around the world. it’s design, craftsmanship, dependability, and accuracy are simply unsurpassed. this comparator is “the” primary instrument used to calibrate class X, XX, and XXX master ring gages. and because it’s universal, it is also ideal for measuring master plug gages, setting discs, and other high precision or thin parts.

Call for Price

Air Plugs & Air Ringsair gaging is a precise means of non-contact comparative measurement for the shop floor where coolant and dirt are ever present at the time of measurement. Because of its self-cleaning nature, the same air that is passed against the part is used to detect pressure or flow as the workpiece changes sizes. its easy to use, and our sales people can assist you with the most popular tools like air plugs and air rings, for the most popular brands like edmunds, Federal, sheffield and western amplifiers.

Call for Price

Meyer Gage Corporate Message

There has always been a Meyer in the house. From founder Albert Meyer to John and Jamestoday, the Meyer feel for product quality and customer satisfaction is always guiding thegrowth of the company. “We are gage specialists selling to a segment of the market, thatdemands the most consistent, high level quality, at sensible prices, and we never forget it.”

At Meyer Gage, everybody is very aware that the world of manufacturing and quality ischanging constantly. Since 1960, we have been focused on producing the very finest, fixed limitgages, available in the world. Our company logo says it all, “Gage Makers for the World.”

Keep your eyes on us as we are always changing to meet the challenges and needs of our mostvalued asset, you the customer.

INTRODUCTION & COMPANY PROFILEWe are located in South Windsor, CT in a 28,000 square foot building. We have positionedourselves to provide customers with quick response and short lead times at competitive prices.

Our specialty includes, but is not limited to the following:

Precision Fixed Limit Gages for use in Aerospace, Medical, Automotive Electronic andMetal Working Industries.

QUALITY POLICY STATEMENTWe will strive to ensure customer satisfaction by continuously improving the effectiveness of our processand providing on time delivery of defect free products to our valued customers. Completecustomer satisfaction is our goal.

Each employee is responsible for reaching desired requirements each and every time by first,knowing and understanding his/her job function and then by performing each task to the bestof his/her ability. When an employee believes there is a “better way” he/she has the power toinitiate action to cause formal changes through management.Comprehensive documentation governs our quality program, procedures, and practices. Thisdocumentation, some that affects product quality, shall be formally documented and controlled.All such documents shall be maintained current and be easily accessible.We are comprised of one facility located at 230 Burnham St., South Windsor, Ct. USA and havebeen in continuous operation since 1960. We are autonomous with our own documented quali-ty system and a quality manual defining the method(s) of controlling product or service.

COMMITMENT TO QUALITYAs President and Vice President, we fully support the effort to maintain the quality system andits compliance to ISO 9001:2000. With this quality system we are committed to a strategy of con-tinuous improvement by active participation of all employees resulting in total customer satis-faction. We place an emphasis on defect prevention rather than defect detection. Quality is everyemployee’s responsibility.

John Meyer, President James Meyer, Vice President

Meyer GageCompany, Inc.230 Burnham Street, South Windsor, CT 06074Tel.860 528-6526Toll Free 1 800 243-7087Fax 860 528-1428 (24Hours)www.meyergage.com

Distributed by:

WARRANTY:Meyer Gage warrants all gages for 30 days from the date ofshipment, except in cases of customer error or mishandling.This 30 day period allows ample time for all gages to beinspected for any manufacturing inaccuracies.

ORDERING INFORMATION:Visit our Distributor locater @www.meyergage.com to find yourlocal Distributor, or call us direct for a Distributor nearest you.

RETURNS AND EXCHANGES:An RMA is required for all exchanges and returns. Please contactour customer service department for assistance.

CERTIFICATIONS:For details see page 49.

MINIMUMORDER CHARGE:There is a twenty dollar minimum charge.

© 2009 Meyer Gage Company, Inc. Prices subject to change without notice. Not responsible for typographic pricing errors. Printed in U.S.A.

QUALITYPOLICYSTATEMENT:Meyer Gage Co. will strive to ensure customer satisfaction bycontinuously improving the effectiveness of our process, andproviding on time delivery of defect free products to our valuedcustomers.

Complete Customer Satisfaction is our Goal.

All Meyer gages andsets are made in theU.S.A.

MEYER G AGE - AIT Tools · Diameter GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGO Range Assembly...

Documents

Transcript of MEYER G AGE - AIT Tools · Diameter GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGO Range Assembly...