MES 1220

Department of Textile Engineering

Exp 1: Study of hand tools and machine tools available in wood working shop

Exp2: Fabrication of wood pattern with the aid of available tools in the workshop

Exp3: Acquintance of different hand tools and machines used in Arc welding and practice of different joints with Arc welding

Exp4; Study of different hand tools and machines used in Gas Welding and practice of different joints with gas(Oxy-acetylene) welding

Exp5: Study of tools used in foundry and making a metal casting with molding sand preparation

Report Writing

1. Introduction

2. Objectives

For example, for exp5: The objectives of the experiments are given/outlined/demonstrated below:

2.1. Acquintance and study of various hand tools related to foundry

2.2. Preparation of sand mold for metal casting

2.3. Study of available sand casting techniques

2.4. To cast a pattern by using Aluminum as molten metal

3. Materials and Tools required for the experiment (with details figure)

For example. for exp 5: 3.1. Gate cutter (description) fig 3.1. Gate cutter

3.2 function

4. Theory:

5. Methodology to perform the Experiment/Laboratory Work procedure

6. Lab Work Result (with figure)

7. Discussion

8. Conclusion

9 References

Production technology by R.K. jain

9.1. Jain, R.K.,”Production technology”, volume, publication, publishing year, page no.