Memoria CIMNE 2010
-
Upload
international-center-for-numerical-methods-in-engineering -
Category
Documents
-
view
219 -
download
3
description
Transcript of Memoria CIMNE 2010
Centro Internacional de Métodos Numéricos en Ingeniería
International Center for Numerical Methods in Engineering
Centre Internacional de Mètodes Numèrics en l’Enginyeria
�����
���������������������� ���
1987-2011
���������������������� ���
Consorci / Consorcio / Consortium
en col·laboració / en colaboración / in colaboration with
��������������
UNIVERSITAT POLITÈCNICA DE CATALUNYA
Generalitat de Catalunya
�����
Centro Internacional de Métodos Numéricos en Ingeniería
International Center for Numerical Methods in Engineering
Centre Internacional de Mètodes Numèrics en Enginyeria
1987-2011
Informe d’activitatsInforme de actividades
Activity Report
�������������
ÓRGANOS DE GOBIERNO
GOVERNING BODIES
Març 2011
© Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE)
Impresió i enquadernació: Dsignum, estudi gràfic
����������������
Consejo de Gobierno
Governing Council
President / Presidente / President Representant de la Conselleria d’Economia i Coneixement
Vicepresident executiu / Vice-Presidente ejecutivo / Executive Vice-PresidentSr. Eugenio Oñate (Catedràtic UPC)
Vocals / Vocales / MembersPresident de la Conselleria de Política Territorial i Sostenibilitat
President de la Conselleria de Comerç, Indústria i Energia
Sr. Antoni Giró Roca(Rector UPC)
Sr. Benjamín Suàrez(Catedràtic, UPC)
Sr. Lluís Ramallo(President Comissió Espanyola de la UNESCO)
����������������
Comisión Ejecutiva
Executive Council
President / Presidente / PresidentSr. Eugenio OñateCatedràtic Universitat Politècnica de Catalunya
Vocals / Vocales / MembersProf. Pere BrunetCatedràtic Universitat Politècnica de Catalunya Prof. Ángel Cardama AznarCatedràtic Universitat Politècnica de Catalunya
Prof. Josep Casanovas GarcíaCatedràtic Universitat Politècnica de Catalunya
Sra. Francisca García-SiciliaUNESCO
Prof. Antonio GensCatedràtic Universitat Politècnica de Catalunya
Prof. Ana PerezVicerectora adjunta de Recerca UPC
Prof. Antonio HuertaCatedràtic Universitat Politècnica de Catalunya
Prof. Juan MiquelCatedràtic Universitat Politècnica de Catalunya
Sr. Lluís Rovira Dtor. Gral. CERCA (GC*)
Sr. Pau VilloriaSecret. Gral. Dept. Territori i Sostenibilitat (GC*)
President de la Conselleria de Comerç, Indústria i Energia
���������������
Consejo Asesor
Advisory Council
Prof. Eduardo Alonso UPC
Prof. Manuel Casteleiro Universidad La Coruña
Prof. José Manuel Correas Universidad Zaragoza
Prof. Eduardo Dvorkin Universidad de Buenos Aires, Argentina
Prof. Raúl Feijóo ����������������� �����������������������������������������
Prof. Antonio Gens UPC
Prof. Juan Carlos Heinrich Department of Aerospace & Mechanical Engng.,Tucson, USA
Prof. Geoffrey HolisterUNESCO
Prof. Sergio Idelsohn Universidad Nacional del Litoral, Santa Fe, Argentina
Prof. Lluís Jofre UPC
Prof. Michael Kleiber Polish Academy of Sciences, Warsaw, Poland
Prof. Bernd Kröplin University of Stuttgart, Alemanya
Prof. Antonio Marí UPC
Prof. Francisco Michavila Universidad Politécnica de Madrid
Prof. Xavier Oliver UPC
Prof. Roger Owen University College of Swansea, United Kingdom
Prof. Bernard Schrefler Universitat de Padova, Itàlia
Dr. Honorio Sierra
Prof. Benjamín Suárez UPC
Prof. Oleg C. Zienkiewicz †Catedratic UNESCO de Mètodes Numèrics en Enginyeria, UPC
*GC: Generalitat de Catalunya * informació a/ Información al / Information up to: 31.12.2010
�����
��� ��������������������������������������������������������������������������������� � !
"�� #$�������%����������������������������������������������������������������� � �"
&��������������� #$������������������������������������������������������ � �'
'��������������������������������������������������������������������������������� � "(
)�������#����������������������������������������������������������������������� � "*
*�������� #$������������������������������������������������������������������� � &*
+����������������%������������������������������������������������������������� � '(
!�� ��,����������������������������������������������������������������������������� � '*
-�� �.������������������������������������������������������������������������������ � )(
�(�����������������/01��������������������������������������������������������� � *(
���� ��������.����2����������,������������������ #$������ � +(
�"��3/�������2��4�������5�������,����������������2������������ � +'
�&�� ��������� #$���������������������������������������������������������� ��(*
�'��#����������������%��6���������������,���������������������������� ���(
�)�����������2������������������������������������������������������������������ ���"
ÍNDICE
1. Presentación ................................................................................ 8
2. CIMNE en cifras ........................................................................... 12
3. Estructura de CIMNE ................................................................... 14
4. Sedes Nacionales ........................................................................ 20
5. Sedes Internacionales ................................................................. 26
6. Aulas CIMNE ................................................................................. 36
7. Actividades de formación ............................................................ 40
8. Congresos .................................................................................... 46
9. Publicaciones ............................................................................... 50
���������� �������� .............................................................. 60
11. Premios recibidos por investigadores vinculados a CIMNE ... 70
12. Líneas y proyectos de investigación y desarrollo .................... 74
13. Productos CIMNE ....................................................................... 106
14. Innovación y transferencia de tecnología ................................ 110
15. Notas de prensa ........................................................................ 112
CONTENTS
1. Introduction .................................................................. 8
2. CIMNE in numbers ....................................................... 12
3. Organization chart ........................................................ 14
4. National Branches ......................................................... 20
5. International Branches .................................................. 26
6. CIMNE Classrooms ....................................................... 36
7. Training activities ......................................................... 40
8. Conferences ................................................................. 46
9. Publications .................................................................. 50
10. Scientific societies ...................................................... 60
11. Awards received by scientist linked to CIMNE ........... 70
12. Research and development lines and projects ............ 74
13. CIMNE products ......................................................... 106
14. Innovation and technology transfer ............................. 110
15. Press releases ............................................................. 112
Presentació
Presentación
Introduction
9
������� �
35�.4�������5�1����� ��%�����7��2������������ ���������� ���4������� ������������������������2�����2��� #$���������������8��"((-9"(�(�������������������4����������������������������:�����������������������������������-!+�
������ ���� �������� ����� �� ����� ��8�;� #$��<�� ��2������ ����������� ��� %�������;� �5���������,������ �� ��������%��6�����������=,�������������2�������6���������6������������������2���������������,��8����������������������������������
PRESENTACIÓN
El objetivo de este informe es presentar un resumen del conjunto de actividades desarrolladas por CIMNE durante los años 2009-2010 y un resumen del conjunto de actividades realizadas desde su creación en 1987.
En los últimos veintitres años CIMNE ha impulsado actividades de formación, de investigación y de transferen-cia tecnológica en el campo de los métodos numéricos y aplicaciones en ingeniería en un contexto internacio-nal.
INTRODUCTION
The aim of this report is to present a perspective and also a summary of the various activities carried out by CIMNE since its creation in 1987 with an emphasis on the activities of the last two years 2009-2010.
In the last twenty three years CIMNE has promoted training and research activities and technology transfer in an international context.
Camp Nord, UPC / Campus Norte UPC / Nord Campus UPC
Ello se ha traducido en:
> la organización de 469 cursos y se-minarios y 93 congresos de carácter nacional e internacional.
> la publicación de 122 libros, 15 progra-mas educativos de ordenador, 186 mo-nografías, 2 revistas periódicas y más ������������� �������� ���������� ��
> la participación en más de 1379 pro-yectos de investigación y desarrollo �������� � ���� ��� ����� ������!� ��Ministerio de Ciencia y Tecnología, el CIDEM, la CIRIT, los Ministerios de Industria y Fomento, así como por em-presas españolas y extranjeras.
> la creación de 25 Aulas CIMNE en colaboración con diversas universi-dades de todo el mundo.
> ��������������� ����� ���"#$-NE de más de 501 investigadores y ������� ����� �%�������������
> la actuación como Secretariado de la Sociedad Española de Métodos Numéricos en Ingeniería.
> la labor como Secretariado General de la International Association for Com putational Mechanics (IACM).
> la labor como Secretariado de la European Community on Computa-tional Methods in Applied Sciences (ECCOMAS).
������5<�������?����@�
�> �5��,����:��������'*-������������9�������;�-&����,�������������A�9�����������������������������
�> ��� 2�.�������� ��� �""� ���.���;� �)�2��,�����������������5���������;��!*�����,��0��;�"����������2���=9��1�������7�����-)+����.���������9�/0������6�������
�> ��� 2������2����� � ����7�� ��� �&+-�2��4������ �5�������,����� �� �����9����2������0���B����2������C�������2��;����$������������ �6������� D������,��;� ��� #$;� ��� #9�#D;� ���� $���������� �5#��������� ��E�����;��������.7�2�����2��������2��8�������������,������
�> ��������������")������� #$��������F��.������� ��.� ��������� ���9�����������G��������������
�> ���0���B�������5���������� #$9�����)(���������,�������������/90������2�����,����������������
�> �5��������� ������������������ ��� ������������ �2��8���� ��� $6���������6���������,��8�����H�$�#I
�> �5�����������������������������9������������#��������������������9����� %��� ��2���������� $��<�9�����H#� $I�
The results of this are reflected in:
> the organization of more than 469 courses and seminars and 93 national and international conferences.
> the publication of 122 books, 15 educational software programs, 186 monographs, 2 quarterly journals and over 957 scientific and technical reports.
> the participation in more than 1379 R+D projects, with the financial support of the European Community, the Spanish Government and various organizations as well as Spanish and international enterprises.
> the creation of 25 CIMNE Classrooms in cooperation with universities from around the world.
> the support for more than 501 prestigious international scientists to visit CIMNE.
> the role of CIMNE as the General Secretariat of the Spanish Association for Numerical Methods in Engineering (SEMNI)
> the role of CIMNE as the General Secretariat of the International Asso ciation for Computational Mechanics (IACM)
> the role of CIMNE as the Secretariat of the European Community on Compu tational Methods in Applied Sciences (ECCOMAS).
11
�> �5������������������������������������2���� �������8���� ��2����������$��<��������22��������������H �$��I�
�> �5����������������������2���������5���2�����������<� �������8����E��J;�D��.����������� ��.�������H� �ED� I�
�> �5������������ #$�������� ������� ��� A������C�� �����$6���������6����� ����,��8�����
�> ���2������2�������� #$���������������������2��4��������2����������2�����������������9���:��������2�����������������������2��4����������K�
�> �G������������������.���������L�������� ������������2���������#���������D������=,����HL�����#DI�������2��� #$�H��������������� ������8�I�
������2A,�������,M�������������������2������%������������5�1������������������
> la actuación como centro piloto de la European Research Community in Flow, Turbulence and Com-bustion (ERCOFTAC).
> ��������������&�� �������"'������*��"+���$����� �*�&���� ���#�%������
> la participación de CIMNE como socio en nuevos proyectos empresariales para industrialización de productos resultantes de proyectos de I+D.
> la actuación como miembro de la Xarxa de Centres de Suport a la Innovació Tecnológica (Xarxa IT) creada por el CIDEM (Generalitat de Catalunya).
En las páginas siguientes se resumen los aspectos fundamentales de estas actividades.
> the role of CIMNE as a pilot centre of the European Research Community in Flow, Turbulence and Combustion (ERCOFTAC)
> the role of CIMNE as host of the UNESCO Chair in Numerical Methods in Engineering
> the role of CIMNE as a shareholder in new companies aiming to industrialize and market results from RTD projects
> the role of CIMNE as a member of the “Xarxa de Centres de Suport a la Innovació Tecnológica” (Xarxa IT) created by CIDEM (Generalitat de Catalunya)
In the following pages a summary of these activities is presented.
CIMNE en xifres
CIMNE en cifras
CIMNE in numbers
13
2009-2010 1987-2010
Cursos i seminaris / Cursos y seminarios / Courses and Seminars: 15 469
Congressos / Congresos / Conferences: 24 93
Publicacions / Publicaciones / Publications 33 1280
Llibres/ Libros/ Books: 3 122
�������������������������������!�" 8 186
Publicacions de recerca/ Publicaciones de investigación/ Research reports: 9 349
Informes tècnics/ Informes técnicos/ Technical report: 13 608
Programes educatius/ Programas educativos/ Educational Programs: - 15
Projectes d’ I+D+i / Proyectos de I+D+i / Research projects 245 (14.240.257 �) 1379 (56.539.633 �)
Comunitat Europea / Comunidad Europea / EC projects: 19 (5.322.734 �) 166 (18.035.300 �)
Projectes Nacionals/ Proyectos Nacionales/ National Projects: 57 (2.352.794 �) 333 (13.341.151 �)
Projectes Catalans/ Proyectos Catalanes/ Catalan Projects: 11 (195.454 �) 29 (381.444 €)
Projectes Internacionals/ Proyectos Internacionales/ International Projects: 2 (477.280 �) 3 (690.573 �)
Projectes amb empreses/ Proyectos con empresas/ Industrial Projects : 156 (5.891.993 �) 848 (24.091.162 �)
Creació de noves empreses / Creación de nuevas empresas / Creation of new companies — 3
Soluciones Integrales de Formación y Gestión Structuralia, S.A. (2001)
Compass Ingeniería y Sistemas, S.A. (2001)
Ingenia, AIE (2003)
Creació d’Aules CIMNE / Creación de Aulas CIMNE / Creation of CIMNE Classrooms 1 25
España (7), Argentina (4), México (3), Brasil (2), Colombia (2), Cuba (1), Chile (1), Venezuela (3), Iran (2),
Perú (1), El Salvador (1)
� �������� ��� CIMNE EN CIFRAS CIMNE IN NUMBERS
informació a / Información a / Information up to: 02/03/2011
Estructura de CIMNE
Estructura de CIMNE
Organization Chart
15
SERVEIS GENERALSSEVICIOS GENERALES
GENERAL SERVICES
RECERCA, DESENVOLUPAMENT I INNOVACIÓINVESTIGACIÓN, DESARROLLO E INNOVACIÓNRESEARCH, DEVELOPMENT AND INNOVATION
R+D SECTORIALR+D SECTORIALSECTORIAL RTD
R+D BÀSICAR+D BÁSICABASIC RTD
R+D TRANSVERSALR+D TRANSVERSALTRANSVERSAL RTD
INSTAL·LACIONS I EQUIPSINSTALACIONES Y EQUIPOS
INFRASTRUCTURE & EQUIPMENT
FORMACIÓ I DIFUSIÓFORMACIÓN Y DIFUSIÓN
TRAINING & DISEMINATION
GESTIÓ DE PROJECTESGESTIÓN DE PROYECTOSPROJECT MANAGEMENT
ADMINISTRACIÓ I FINANZAS ADMINISTRACIÓN Y FINANZASADMINISTRATION & FINANCES
CONSELL DE GOVERNCONSEJO DE GOBIERNOGOVERNING COUNCIL
DIRECTOR DIRECTOR MANAGER
DIRECTOR GENERALDIRECTOR GENERALGENERAL MANAGER
CONSELL CIENTÍFIC ASSESSORCONSEJO CIENTÍFICO ASESORADVISORY SCIENTIFIC COUNCIL
CONSELL EMPRESARIALCONSEJO EMPRESARIALINDUSTRIAL COUNCIL
COMISSIÓ EXECUTIVACOMISIÓN EJECUTIVAEXECUTIVE COUNCIL
DIRECTOR DIRECTOR MANAGER
Enginyeria Aeroespacial Ingeniería AerospacialAerospace Engineering
Enginyeria CivilIngeniería Civil
Civil Engineering
Energia i Medi Ambient Energía y Medio AmbienteEnergy and Environment
Processos de FabricacióProcesos de Fabricación
Manufacturing Processes
Enginyeria Marina i NavalIngeniería Marina y Naval
Marine and Naval Engineering
Enginyeria d’AlimentsIngeniería de Alimentos
Food Engineering
Enginyeria BiomèdicaIngeniería Biomédica
Bio-Medical Engineering
Models Socials i EconòmicsModelos Sociales y EconómicosSocial and Economical Models
Mecànica De Sòlids I EstructuresMecánica De Sólidos y Estructuras
Solid And Structural Mechanics
Fluiad-dinàmica ComputationalFluido-Dinámica ComputationalComputational Fluid Dinamics
Mecànica EstocàsticaMecánica EstocasticaStochastic Mechanics
MaterialsMaterialesMaterials
Mètodes d’OptimizacióMétodos de Optimización
Optimization Methods
ElectromagnetismeElectromagnetismo
Electromagnetics
Mètodes NumèricsMétodos NuméricosNumerical Methods
GeomecànicaGeomecánica
Geomechanics
Pre i Post ProcessamentPre i Post Proceso
Pre i Post Processing
Tec. de la Informació i ComunicacióTec. de la Información y Comunic.
Information and CommunicationTech.
Intel·ligencia ArtificialInteligencia ArtificialArtificial Intelligence
Serveis InformàticsServicios Informáticos
Computer Services
Manteniment Instal·lacionsMantenimiento de Instalaciones Maintenance of Infrastructures
PublicacionsPublicacionesPublications
FormacióFormación
Training
CongressosCongresos
Conferences
Aules CIMNEAulas CIMNE
CIMNE Classrooms
Projectes InternacionalsProyectos Internacionales
International Projects
Projectes NacionalsProyectos Nacionales
National Projects
Comptabilitat i FinancesContabilidad y Finanzas
Management and Finances
Recursos HumansRecursos HumanosHuman Resources
Gestió de PatrimoniGestión de Patrimonio
Investment Management
Societats CientífiquesSociedades Cientificas
Scientific Societies
�������� ������ ��� ��
#$�����2�������1������������������������������������,�����G��,���,�������,M���@
ESTRUCTURA Y ORGANIZACIÓN
CIMNE tiene previsto que su estructura evo-lucione según el organigrama siguiente:
ORGANIZATION CHART
The structure of CIMNE will evolve in accordance with the following chart:
�������� ������ ��� ��
ESTRUCTURA Y ORGANIZACIÓN
ORGANIZATION CHART
Director General / Director Generales / General Manager:
Eugenio Oñate
Subdirector / Subdirector / Vice-Manager:
Pere-Andreu Ubach
�������������������������������� � ������ �
�������� ��� �����
#$��<����,��������2��/������5�%����������������������������2���������������,�������� ��%������� 2�?���� 2��� 2��/����� 0����2���������:������.�����������������������9����2�������
�� ��� ������ ��� ��������� ���� �������,������0����B����2��� #$��������2��/�����-!+9"((-���������.����5�������,������1���<������.��������� #$���������"((-� ��,��92����2�������2�/�����2�����6����N�
ÁREA DE INVESTIGACIÓN, DESARROLLO E INNOVACIÓN
PERSONAL INVESTIGADOR
CIMNE tiene una política de favorecer la contratación de personal investigador de �<��� � ��� � ���� ������ � ��� � �����trabajos de Investigación y desarrollo.
En la tabla se relacionan los investigado-� � �������� � ���� "#$*�� �� �� ���������1987-2009 y el número de investigado-res que han trabajado en CIMNE en 2009 agrupados por su país de procedencia*.
RESEARCH DEVELOPMENT AND INNOVATION AREA
RESEARCH STAFF
CIMNE supports scientists from various countries to perform research and developmental work for a fixed period of time. The number of scientists supported financially by CIMNE during 1987-2009 and the number of scientists who worked in CIMNE in 2009 are listed below, grouped by country of origin*.
2010 87-10Alemania 3 28Argentina 8 57Australia 2Austria 2 2Bélgica 1 4Bolivia 3Bulgaria 1 1Brasil 5 8China 1 7Chile 6 8Colombia 16 18Cuba 4Ecuador 1 2Egipto 1 1España 123 201Estados Unidos 3
* informació a/ Información al / Information up to: 14.03.2011
2010 87-10Etiopia 1 1Francia 12Filipinas 1 1Grecia 1Holanda 2 4Hungria 1India 2 11Irán 4 7Irlanda 1Italia 10 18����� 4Korea 1Luxemburgo 1 1Marruecos 1 2México 4 14Panamá 1
2010 87-10Perú 2 4Polonia 1 3Portugal 1 2Reino Unido 9Republica Checa 1Rumania 2 5Rusia 1 1Serbia 1 2Suecia 1Suiza 1Thailandia 1Túnez 1 1Turquia 1 2Uruguay 1 2Venezuela 3 6Vietnam 1TOTAL 208 471
��� ���������������� INVESTIGADORES POST DOCTORALES POST DOCTORAL RESEARCHERS
ARNAU PedroBADIA SantiagoCAMAS BorjaCANTE����CARBONELL������#CARREÑO LilianaDADVAND PooyanFLORES Roberto
GARITTE BenoitGARRIGA AdanGEYER AdelinaHANGANU AlexandruHERNANDEZ���$���HYSING Shu-RenIDELSOHN SergioLEE Dong
LOPEZ RobertoMAIDANA ManuelMARTI�����MARTI�� ��MARTINEZ XavierMORA��%���PINYOL NuriaPRINCIPE��%���
RASTELLINI Fernando�'�;<���=>ROSSI Riccardo RYZHAKOV PavelSALOMON OmarSCHWEIGER HansZÁRATE Francisco
17
��������������� �� ���� ������������
PERSONAL DE I+D+I Y ESTUDIANTES DE DOCTORADO
RTD STAFF AND PH.D. STUDENTS
ALMOLDA XavierANAYA PabloANSON Maria Isabel?�?@?�����ARBIOL DanielARNAU Pedro A.ARNEDO DiegoARRUFAT FerranAVILA MatiasBADÍA Santiago I.�?JQ;@����BARANDA TaniaBATLLE FranciscoBENOLOL SimónBERNARDEZ AnnaBLANCO AlejandroBORRELL XavierCACHO LuisCAMPÀ FrancescCAPAPÉ Sergio�?��?�'@?������?��';��������?@?'[?@�����CASANOVAS Maria del MarCASAS GuillermoCASTAÑO VictorCELIGUETA Miguel AngelCHAPARRO Mª CarmenCHICO FranciscoCID Alexis�J\�J?'��%����J\�J?'�����CLIMENT NataliaCOLL AbelCOMA Marti�'];�?�����CUADRADO AgustínCULI LauraDAVILA MariollyDE MIER MónicaDEU Amadeu
DI MARIANO Alessandra^J;Q'��%���DIÉGUEZ AndrésEDO MarcESCOLANO Enrique;@�'��J?�����FERRER CarlesFERRIZ AlbertoFERRIZ AndrésFLORES Roberto Maurice_']�����FRUITOS OscarGALLARDO DanielGARCIA DanielGARCIA-SICILIA Mª FranciscaGARRIGA Adan AmorGENS Nuria GEYER AdelinaGONZÁLEZ Ricardo AdriánGRAN Meritxell`;�?^;{���$���IDELSOHN Sergio RodolfoISANTA Roger�?J�;_���������?�?|]?? �}������;�;{_��������J�;;{������J�;;{����KUBESCH Martí�?Q|?@������?]'��;�#@� %����LLACAY BárbaraLÓPEZ Roberto�?�J�� ���?�]J�����;�� ��MAYMÓ AlexMELENDO AdriàMENDEZ RogerMERINO DanielMONROS Anna�'�'~������� ��
�'�?_����������%���'�J[;�?�����'�?];��������OTERO Fermin EnriqueOTIN RubénPARDO Maria del MarPASENAU MiguelPÉREZ Daniel\��;{����PINYOL Nuria MercèPLANAS Ramón\'@�����POZO DanielRAMÓN Anna�J;�?�� ��RODRÍGUEZ CarlosRODRIGUEZ DanielROIG Carlos A.ROIZ AdriánROMÁN ManuelSALAZAR FernandoSALICHS SergiSALOMÓN Ramón OmarSÁNCHEZ AntonioSANTANA DulcisSARMIENTO MartaSEGURA Carlos@;Q|�?��%���SERVAN Borja@'�;�������SOTO AlbertoSOUDAH EduardoTARRAGÓ Daniel];J��Q ����TENA AlbertoUBACH Pere AndreuVALERO SergioVELASCO VioletaVILANOVA Ramón
* informació a/ Información al / Information up to: 31.12.2010
Directora Serveis Generals/ Directora Servicios Generales/General Services Manager: Mª Angeles Viciana
������A������������������������O�Secretaria del Director General / General Manager Secretary
Mercè Alberich
������� ��E��������O�Gestión y Finanzas/Management and Finances
Mª Carmen Linares Mercedes LinaresValentín CatalanFrancisco de la RosaThaydy L. BernalCristina LuqueNuria Garcia
���������O�Sistemas / Systems
Miguel AlonsoFelip MollDavid González
�.���������OPublicaciones/Publications
�������@�����Adriana Stilmann Sonia LópezClara Esclusa
���������� ��4�����OGestión de Proyectos / Project Management
Anna Font Sandra PerezMaëlle Du PenhoatMaria BoncompteDaniel CuadratElena Martín
��,�������O�Congresos / Conferences
Cristina Forace Laia ArandaAlessio BazzanellaA. Marcela Silhankova
������ #$��O�Aulas CIMNE/ CIMNE Classrooms
Francisca Garcia SiciliaEmmaria Danesi
��������$A�����O�Curso de Master/ Master Course
Lelia ZielonkaMarga Olea
www.cimne.com
������������ ��������
�� 2�������� �5�������������� �5<������� ������������ �� ��2�������:���� ���%����������������������������������������� #$�� ��� ���� ������ ��%�������A�����
�1����� �1��2� ���A� ����,���� 2��� ����2����������,M����N@
ÁREA DE SERVICIOS GENERALES
El personal de administración se ha ido consolidando y especializando en fun-ción de las necesidades y crecimiento de CIMNE en sus diferentes áreas.
El equipo de administración de CIMNE lo integran las siguientes personas*:
GENERAL SERVICES AREA
CIMNE’s administration staff has specialized to cope with the increasing needs of CIMNE in a wide range of areas.
The following persons form CIMNE’s administrative team*:
* informació a/ Información al / Information up to: 31.12.2010
19
��� ������� ��
#$��2���������������5�������,��������������������2���������:������1�������9�6���1�����������/01����
3������� �5�������,������ ���������� �������������8��"((-9"(�(@
INVESTIGADORES VISITANTES
CIMNE promueve estancias de profesores e investigadores de todo el mundo para ���>�������� ������&�� ���������� �
Listado de investigadores visitantes duran-te los años 2009-2010:
VISITING SCIENTISTS
CIMNE promotes the visits of professors and scientists from around the world working on research and educational projects.
List of visiting scientists in the years 2009-2010:
Dr. Takashi Yabe, Tokyo Institute of Tech-nology, �?\?
Dr. Okan Su, Zonguldak Karaelmas Uni-versity, Department of Mining Enginee-ring Division of Mine Mechanization & Tech., University of Turkey, TURKEY
Prof. Mario Storti, Universidad Nacional del Litoral, Grupo de Tecnología Mecá-nica del INTEC, ARGENTINA
Prof. Gianpaolo Ruocco, School of Food Technology, Universita degli Studi della Basilicata, ITALY
Dr. Jerzy Rojek, Department of Compu-tational Engineering, Institute of Funda-mental Technological Research, Polish Academy of Sciences, POLAND
Dr. Carlos A. Recarey, Centro de Investi-gación y Desarrollo de las Estructuras y los Materiales (CIDEM), Facultad de Construcciones,Univ. Central “Marta Abreu” de Las Villas (UCLV),CUBA
Prof. Raul Radovitzki, MIT Institute for Soldier Nanotechnologies, USA
Prof. Raynald Löhner, Institute for Com-putational Sciences and Informatics Science and Technology Bld. I, USA
Prof. Sergio Idelsohn, Universidad Na-cional del Litoral, Grupo de Tecnología Mecánica del INTEC, ARGENTINA
Prof. Carlos A. Felippa, University of Co-lorado at Boulder, Dpt. of Aerospace Engng. Sciences, USA
Prof. Alvaro L.G.A. Coutinho, Center for Parallel Computing and Department of Civil Engineering, COPPE/ Federal |��%�����>���������������BRAZIL
Ing. Gabriel Andrés Bernal Granados, ITEC Ltda., COLOMBIA
Prof. Ever J. Barbero, Mechanical and Aerospace Engineering, College of Engineering and Mineral Resources at West Virginia University, USA
Prof. Miguel Cerrolaza, Universidad Cen-tral de Venezuela, Inst. De Materiales y Modelos Estructurales, Facultad de Ingeniería, VENEZUELA
Prof. Roland Wuechner, TU Munich, GERMANY
Prof. Peter Wriggers, Institut für Baume-chanik und Numerische Mechanik, Lei-bniz Universität Hannover, GERMANY
Prof. K. Srinivas, Deputy Head, School of Aerospace Mechanical and Mechatro-nic Engineering, AUSTRALIA
������������ �������Dept. of Structu-ral and Transportation Engng., Univ. of Padova, ITALY
Prof. Jose Ramón Saborido, Universidad Central de la Villas , (UCLV), CUBA
Prof. Shihai Li,Institute Mechanics Chinese academy of Sciences, CHINA
Dr. Luis Felipe González Granados, The University of Sydney, AUSTRALIA
Prof. Fernando Flores, Departamento de Estructuras, FCEFN, Universidad Nacional de Córdoba, ARGENTINA
Prof. Mauricio Pohl, ������ ^������-mento de Electrónica e Informática, Responsible del Aula CIMNE-UCA, EL SALVADOR
Ing. Javier Piazzese, Fundación CIMNE-Latinoámerica, ARGENTINA
Prof. Jacques Periaux, Catedràtic Unesco de Mètodes Numèrics en Enginyeria, FRANCE
Prof. Assad Oberai, MANE, RPI
Ing. William Ernesto Marroquín, Vice Rector Académico Adjunto de la UCA, EL SALVADOR
Dr. Xin Lv, 009, Reynolds Building, School of Engineering, University of Plymouth, UK
Dr. Facundo del Pin, Livermore Software Technology Corporation,USA
Prof. Liz Nallim, Universidad Nacional de Salta, ARGNETINA
Prof. Luca Pelà, Universitat de Bolònia, ITALY
Prof. Gustavo Buscaglia, Instituto de Ciencias Matemáticas e de Compu-taçao, Univ. de Sao Paulo, BRASIL
Prof. Fernando Flores, Dpto. Estructuras, FCEFN, Universidad Nacional de Cór-doba, ARGENTINA
Prof. Susana Gea, Universidad Nacional de Salta, ARGENTINA
Prof. Michael Ghosn, University of New York, USA
Prof. Miguel Cerrolaza, Universidad Central de Vene-zuela, Inst. De Materiales y Modelos Estructurales, Facultad de Ingeniería, VENEZUELAg
Dr. Takashi Yabe, ]��>�J����������]��!�� ��>������
Seus Nacionals
Sedes Nacionales
National Branches
21
ANTECEDENTES Y UBICACIÓN
El Centro Internacional de Métodos Numéricos en Ingeniería (CIM-NE) fue creado en marzo de 1987 por Decreto de la Generalitat de "���������?+@"�BH�JK������B������������������������*��"+��CIMNE tiene personalidad jurídica como consorcio entre la Gene-���������"�����������������Q� ����U�����������"���������
La sede central de CIMNE ocupa 800m2����������� ����� ����"�&�� �*�����������Q� ����U�����������"��������!���������>��������������������� ������� �����V�������������de Ingenieros, Caminos, Canales y Puertos de Barcelona.
CIMNE dispone también de sedes en Terrassa, Madrid, Castellde-fels, Ibiza, Washington, China, Santa Fe, Sinpapur y de espacios para desarrollo de actividades de I+D+i y formación en las 25 Aulas CIMNE distribuidas por todo el mundo.
BACKGROUND AND LOCATION
The International Center for Numerical Methods in Engineering (CIMNE) was created in 1987 under the auspices of UNESCO by the Generalitat de Catalunya (the autonomous government of Catalonia). CIMNE has its own juridical status as a consortium between the Generalitat de Catalunya and the Universitat Politécnica de Catalunya.
The central offices of CIMNE occupy 800m2 in one of the buildings of the Northside Campus of the Technical University of Catalonia (UPC) in the heart of the Escuela Técnica Superior de Ingenie ros, Caminos, Canales y Puertos (School of Civil Engineering).
CIMNE also has offices in Terrassa, Madrid, Castelldefels, Ibiza, Washington, China, Santa Fe, Singapore and space for RTD and training activities in the 25 CIMNE Classrooms distributed around the world.
��������� ��� ��� �
�� ������#����������������$6���������6���������,��8�����H #$�I����7�����������������B�����5��8��-!+�2������������������������������ ������8���� ;�!'�9"(�)��-!+;�������F��.���������.����C�� ��� #$���7�2������������4��/�������������������������������������������� ������8�������C����������� ����6��������� ������8��
3�� ��������������� #$�� �7�!((��"������������ ���0�������� ��2����������� ���C����������� ����6��������� ������8�;���������������4�����G���0������� �G������D6��������2�������G�,��8���;� �����;� ������ �� ��������P���������
#$�����2�������.7�����������D�������;�$�����;� ��������%���;�������;�Q��<��,���;� <���;�������E�;����,�2������G��2����2������������2�������G������������G#KK�������%��������������")������� #$��������.�?������������������
Port de Barcelona / Puerto de Barcelona / Port of Barcelona
���������; ;������ �����������; ;������ �Q��������; ;������ ������� Cala d’Eivissa / Cala en Ibiza / Creek in Ibiza
������ ������ ������������������� �������� ���� �
CENTRO INTERNACIONAL DE MÉTODOS NUMÉRICOS EN INGENIERÍA
INTERNATIONAL CENTER FOR NUMERICAL METHODS IN ENGINEERING
;��������������������|\��Q��������������08034 Barcelona, EspañaTel. 34-93 205 70 16 - Fax 34-93 401 65 [email protected] - www.cimne.upc.es
� ���������������
3�� ���� ����������� #$����P����������������������5��8��-!+�� ���������!((�"������������ ��2��������������C �
La sede central de CIMNE en Barcelona se creó el año 1987. Consta de 800m2 ubicada ����"�&�� �*����������U"�
The main branche of CIMNE is in Barcelona, it was created in 1987. Consists of 800m2 located in the North Campus of the UPC.
23
� �����������
CIMNE - TERRASSADr. Ullés, 2, 3 - 08224 Terrassa, EspañaTel. 34-93 789 91 69Fax. 34 93 788 3110
3��������� #$�9D��������������������5��8�"((��� ����������)(�"������������������2����������5�����,���������0�������������.�����HP������2I�
La sede de CIMNE-TERRASSA se creó el año 2001. Consta de 150m2 donde se ubica ��������&��������%��������� ���&����&����Z[@����\�
The CIMNE-TERRASSA branche was created in 2001. Consists of 150m2 there is the department of building energy and environment (BeeGroup).
� ����������������
CIMNE - CASTELLDEFELSCampus del Baix Llobregat;��������������}������� #c/Esteve Terradas n. 5 - 08860 Castelldefels, BarcelonaTel. 93 413.41.86
#$�9 ��D33E3�� ��� ��� ��9��,����� ��� �)� �5����.��� ���� "((!�� 3���������F�������� ������ ��������� ��� ��� ��92���������C ��� ��������%���;��������������0������&(((��"��������?�������2������������F��.���������.����C �
CIMNE-CASTELLDEFELS se inauguró el 15 de Octubre del 2008. Las instalaciones están ����� �����"�&�� ��� ����U"���"� �-���<� !� �� ��� ��Q�� ����� �� ]���� &K�construido y compartido en colaboración con ����U"�
CIMNE-CASTELLDEFELS was inaugurated on October 15th 2008. The facilities are located in the Campus of the UPC in Castelldefels, in a new building of 3000 m2 constructed and shared in collaboration with the UPC.
25
� ���������� �
CIMNE - MADRID\����Q����� �������=����������28010 Madrid, EspañaTel. 91.319.13.59
�����,����"((!�����������,��������������� #$�����������������$����������������������������������������� ����������)(�"�
En Mayo de 2008 se inauguró la nueva sede de CIMNE en la ciudad de Madrid ubicada en el centro de la ciudad. Consta de 150m2.
On May 2008 CIMNE inaugurated a new office in Madrid situated in the center of the city. It has 150m2.
� ������ � ��
CIMNE - IBIZA�������?=������������07800 EivissaTel. 971.93.11.94
35��8� "((-� ��� ��� ����,����� ��� ���� ��� #$�9#�#����� ������ ��� !(�"� �����A�����������������������5�����
El año 2009 se inauguró la sede de CIMNE-IBIZA. Consta de 80m2 y está ubicada en el centro de la isla.
The year 2009 was inaugurated the CIMNE-IBIZA branche. It has 80m2 and is located in the center of the island.
Seus Internacionals
Sedes Internacionales
International Branches
27
������R��������8�� #$��<��2�����,��������������2��������������%�������A�����,��,�A01�������������35�.4������7��2������2������2��4�������5#KK���5A�.��� ��������������������F��.���������.����������5�������,����;������������������2�����������%�������2�?�����
�� ������������ ��� 2���������.�������� ���� ��2���6������ �������� �5��2��������� ��� #$����3����9����6����;�C��;����,�2�����L�����
En los últimos años CIMNE ha proseguido su implantación en di-<��� �'�� �%�%�'��� ����&�������������Q�� ������������proyectos de I+D+i de ámbito internacional en colaboración con centros de investigación, universidades y empresas de distintos países.
A continuación se presentan brevemente las experiencias recien-� ���&������������"#$*����_�����&����!���`!���%�����y China.
During last years CIMNE has expanded its presence in different geographical areas in the world. The objective is to participate in international RTD projects in cooperation with research centers, universities and enterprises of different countries.
In the following lines we present briefly the recent experiences in the establishment of CIMNE in Latin America, USA, Singapore and China.
Washington, USA China
Santa Fe, Argentina Singapore
CIMNE en Latinoamérica
La presencia de CIMNE en Latinoamérica se implementa fundamentalmente a través de la Red de Aulas CIMNE que cuenta con 18 Aulas en diversos países Latinoamericanos (Argentina (4), México (3), Brasil (2), Colombia (2), Cuba (1), Chile (1), El Salvador (1), Perú (1) y Venezuela (3)).
Se ha iniciado el proceso de implantación formal de CIM-NE en Latinoamérica a través de la creación de una Fun-dación que impulse la actividad de CIMNE en la región.
La Fundación CIMNE-Latinoamérica (FCL) esta ubicada en la ciudad de Santa Fe en Argentina, lugar donde se creó la primera Aula-CIMNE en la región Ibero-Latinoamericana, �����������������������Q� ����*����������_�������_��actividad de CIMNE en la región la coordina el Ingeniero Ja-vier Piazzese. Javier fue investigador de CIMNE-Barcelona durante el periodo Enero 2002 – Marzo 2007.
CIMNE in Latin America
The presence of CIMNE in Latin America is basically implemented via the CIMNE Classroom Network. This network has 18 Classrooms in different Latin American countries (Argentina (4), Mexico (3), Brasil (2), Colombia (2), Cuba (1), Chile (1), El Salvador (1), Perú (1) and Venezuela (3)).
Recently, the formal establishment of CIMNE in Latin America has been initiated by creating a Foundation to foster the activity of CIMNE in that region.
The new CIMNE-Latin American Foundation (FCL) is located in the city of Santa Fe (Argentina), the place where the first CIMNE Classroom in the Latin American region was created in cooperation with the University of Litoral. The activity of CIMNE in the region is coordinated by Mr. Javier Piazzese. Javier is a civil engineer and was a researcher at CIMNE in the period January 2002 - March 2007.
� ��������� ������ ���
3��2���6�������� #$����3��������6������5��2��������%��������������������7��������L������5������ #$��1�����������.��!�������������������2�?����3����������������H��,�������H'I;�$6����H&I;�P������H"I;� ��=�.���H"I;� �.��H�I;�L����H�I;������������H�I;� ��R�H�I�������B�����H&II��
�5<�������������2���7���5��2���������%��������� #$����3��������6�����������7�����������������5����E��������1�����2������5������������� #$����������,����
3��E�������� #$�93��������6�����HE 3I�����������������������������������E������,������;������������������������2�����������9 #$����������,���#.���93���������������;�������F��.���������.����C�����9�������������������3��������35������������� #$���������,����������������5�,��8���S������ ��::�����S��������������������,�������� #$�9P�������������������2��/����������"(("�9�$��B�"((+��
29
��%���\��==���^�������_��
�������� �PROYECTOS / PROJECTS
SADMA - Desarrollo de un sistema de apoyo a la decisión para monitoriza-����>��������������� �����������históricos del patrimonio cultural usando nuevas technologías. AECID-AGENCIA ESPAÑOLA DE COOPERACIÓN INTERNACIONAL PARA EL DESARROLLO.01/01/2011 - 31/12/2011
VIS - Estudios de vulnerabilidad por �������������� �������!��������-ca Mandinga-Comapala (El Salvador). AECID-AGENCIA ESPAÑOLA DE COOPERACIÓN INTERNACIONAL PARA EL DESARROLLO.01/01/2011 - 31/12/2011
Country risk evaluations and indica-tors of disaster risk and risk mana-gement country risk evaluations ans disaster risk indicators for Belize, El Salvador and Guatemala. INTER-AMERICAN DEVELOPMENT BANK (IADB).15/12/2008 - 30/06/2010.
Evaluación del riesgo de desastres en Honduras. INTER-AMERICAN DEVELOPMENT BANK (IADB).10/03/2009 - 10/09/2010
CAPRA - 6C Disaster Strategy. Central American Probabilistic Risk Assessment. THE WORLD BANK GROUP.28/01/2008 - 30/04/2010
Disaster Risk Reduction in the Ame-ricas. THE FLORIDA INTERNATIONAL UNIVERSITY BOARD OF TRUSTEES (FIU).13/04/2009 - 14/09/2010
Curso Virtual de Gestión Integral de Riesgos y Desastres para 15 partici-pantes de Centro América y el Caribe, de abril a junio 2010. FUPAD - FUND.PANAMERICANA PARA EL DESARROLLO.01/04/2010 - 30/06/2010
Implementation of a Risk Assessment Methodology at a Global Level using Probabilistic Models, Pilot countries: Colombia and Mexico. NACIONES UNIDAS (UNOPS)29/04/2010 - 30/10/2010
CAPRA 2.0 - Probabilistic disaster risk assessment. THE WORLD BANK GROUP24/09/2010 - 31/01/2012
Risk Financial Protection - Technical Assistance to Design a Risk Financial \���������@������>��@������_������� Instrument and a Policy Recommen-dation for Urban Water and Sanitation Utilities in Peru. THE WORLD BANK GROUP.20/09/2010 - 20/05/2011
GUYANA - Design and Implemen-tation of an Integrated Disaster Risk Management Plan (ATN/OC-11718-GY) Risk Indicators and Flood Risk Evaluation for Guyana.01/11/2010 - 01/11/2011
GEM - Global Earthquake Consequen-ces Database. THE GEM FOUNDATION.15/11/2010 - 15/11/2013
#$����C���
#$�����������2�����������2��4�������5#KK��2����,������0���B����2��������������,����:��������5C���������������P�����#��������������2�����������������HP#I;����P����$�������������%0���%����������������<�H���I��
��.��5�.4������������������������2�������5����������������0���6��������� #$����C��;��5<��2����,����������9�����5���� ��2�������������E������������3���������������� #$�9C�����1��������,����:��������A�������������������������Q��<��,���������A�����,����2�����������E�������������/�9���/������.�������������������.����������� �������3�����������/�9���/����<������������������������������������������������������������������� #$9���������R������)���8�������� ������7���������,������������������#���������%�����������������D��<����,8�H�#�DI��������������5��2�������
���������2��/����"((-9"(�(��5<���2����������������%�������������������2���2������� #$�9C���2�������2��9����2��4�������5#KK����C���������F��.���������.���,�������;������������������2�������5�1�����2�/���
Francisca Garcia-Sicilia. Directora CIMNE-USA
"#$*������`
CIMNE desarrolla varios proyectos de I+D+i promovidos �� �������� ������Q� � ���%��>���� �����`� ��� �como el Banco Interamericano para el Desarrollo (BID), ��[�����$�����������+<���<���*�Q���| ���}�Z+*|\�
Con el objetivo de consolidar e impulsar la actividad ����������������"#$*������`!� �}�����&�Q��� ���creación de una Corporación sin Finalidad de Lucro deno-&�����"#$*�J��`��� �����%��>����� �'����������la ciudad de Washington y está dirigida por la Sra. Fran-cisca García-Sicilia en estrecha relación con el Dr. Dave Cramer. La Sra. García-Sicilia ha sido Directora de las re-laciones institucionales internacionales de CIMNE en los últimos 5 años. El Dr. Cramer es investigador del National Institute for Standards and Technology (NIST) y consultor de empresas.
Durante el periodo 2009-2010 se han llevado a cabo di-<��� �����Q� ������������"#$*�J��`������&���- ���������� ���#~?~�����`���������������������%�-nismos, universidades y empresas de ese país.
CIMNE in the US
CIMNE currently develops a number of RTD projects funded by several US organizations such as the Interamerican Development Bank (BID), the World Bank and the Office for Naval Research, among others.
Recently, CIMNE has promoted the creation of a non-profit corporation named CIMNE-USA with the aim of fostering the scientific and technological activities of CIMNE in that country. The new organization is located in the city of Washington DC and is jointly directed by Mrs. Francisca Garcia-Sicilia and Dr. Dave Cramer. Mrs. Garcia-Sicilia has been a director of international liaison activities in CIMNE for the last five years. Dr. Cramer is a senior scientist of the National Institute of Standards and Technology (NIST) in the US and advisor of many companies.
During 2009 and 2010 CIMNE-USA has taken different initiatives to launch RTD projects in the US in cooperation with universities, research centers and enterprises in that country.
31
NICOP - COMPUTATIONAL RE-SEARCH TO SUPPORT THE DEVE-LOPMENT OF SWIMMING AND HOVERING UNDERWATER UN-MANNED VEHICLES (UUV) BY NRL25/04/2008 - 24/02/2009
IMPLOSION - Study of Implosion Pro-blems with the Particle Finite Element Method01/06/2009 - 31/05/2010
T-CRAFT - EVALUATING PERFOR-MANCE OF THE AIR CUSHION, AND SEALS OF A SES T-CRAFT IN THE PRESENCE OF WAVES; AND MANEUVERING IN SHALLOW WATERS01/04/2010 - 31/03/2012
Modeling and simulation of the drill bit region. WEATHERFORD INTERNA-TIONAL INC.23/12/2010 - 30/06/2011
WVU AIRPORT HANGAR - Technical advise on testing procedures and data collection and interpretation of results. Consultant services for testing of the ������� ���%������!��[|?������Hangar. West Virginia University.01/01/2010 - 31/01/2010
VIS - Estudios de vulnerabilidad por �������������� �������!��������-ca Mandinga-Comapala (El Salvador). AECID-Agencia Española de Coopera-ción Internacional para el Desarrollo.01/01/2011 - 31/12/2011
�[|������� ��J������ �\ �����Underwater Tunnel Protection. West Virginia University.01/04/2010 - 30/09/2010
SADMA - Desarrollo de un sistema de apoyo a la decisión para monitoriza-����>��������������� �����������históricos del patrimonio cultural usando nuevas technologías. AECID-Agencia Española de Coopera-ción Internacional para el Desarrollo.01/01/2011 - 31/12/2011
Country risk evaluations and indica-tors of disaster risk and risk mana-gement country risk evaluations ans disaster risk indicators for Belize, El Salvador and Guatemala. INTER-AMERICAN DEVELOPMENT BANK (IADB).15/12/2008 - 30/06/2010.
Evaluación del riesgo de desastres en Honduras. INTER-AMERICAN DEVELOPMENT BANK (IADB).10/03/2009 - 10/09/2010
CAPRA - 6C Disaster Strategy. Central American Probabilistic Risk Assessment. THE WORLD BANK GROUP.28/01/2008 - 30/04/2010
Disaster Risk Reduction in the Ameri-cas. The Florida International Universi-ty board of trustees (FIU).13/04/2009 - 14/09/2010
Curso Virtual de Gestión Integral de Riesgos y Desastres para 15 partici-pantes de Centro América y el Caribe, de abril a junio 2010. FUPAD - FUND.PANAMERICANA PARA EL DESARROLLO.01/04/2010 - 30/06/2010
Implementation of a Risk Assessment Methodology at a Global Level using Probabilistic Models, Pilot countries: Colombia and Mexico. NACIONES UNIDAS (UNOPS)29/04/2010 - 30/10/2010
CAPRA 2.0 - Probabilistic disaster risk assessment.24/09/2010 - 31/01/2012
Risk Financial Protection - Technical Assistance to Design a Risk Financial \���������@������>��@������_������� Instrument and a Policy Recommen-dation for Urban Water and Sanitation Utilities in Peru. THE WORLD BANK GROUP.20/09/2010 - 20/05/2011
GUYANA - Design and Implemen-tation of an Integrated Disaster Risk Management Plan (ATN/OC-11718-GY) Risk Indicators and Flood Risk Evaluation for Guyana.01/11/2010 - 01/11/2011
GEM - Global Earthquake Consequen-ces Database. THE GEM FOUNDATION.15/11/2010 - 15/11/2013
�������� �PROYECTOS / PROJECTS
CIMNE-USA facilities
� ������ �������
������ %����������� ��8�� #$������7� ��������� ���������� ��.���� #��������� %���T�,<� ��%�������� ��2����,�H#T I�� �� #T � 7�� ���� 2�����,����� ��,����:����� ������0���6������ ��� �5�,6�������������� �N����� �����������������,�2����E������5�1�������������;��5<����,��������������������������������F��.������������� #$����#T ���.��5�.4���������2���������������������2��4�������5#KK�����4��������.������.�����5�1���������F��.������;��5<����2������������������5�����������,����:�����1�����.����������� #$�9���,�2�����2�����A��������������2��4�������5#KK����������,����������9�������A���;�������F��.���������.����#T ���������������� #$�9���,�2���7�������������3��,;��������,���������#T ��
������"((-��5<���������:�����%������������������������������������������,��������� #$����#T ����5<�����0���������9����2��4�������5#KK���5�����6�����R����������������������.���������������� #$�������U������1��������������,�9�������� #$���.��� ���;� ��8���������������1�����������������2��������������������#T ����5����.���"((-��
CIMNE EN SINGAPUR
Desde hace varios años CIMNE mantiene estrechas rela-ciones con el Institute for High Performance Computing Z#�U"\�� ��� #�U"� � ���� �� �%� �� ��%��>����� �����-cotécnica de la Agencia Nacional A*Star del Gobierno de ��%�������������� ���������!� �}����&��������-mente un convenio de colaboración entre CIMNE e IHPC con el objetivo de promover actividades y proyectos de I+D+i conjuntos. En base a esta colaboración, se ha im-pulsado la creación de una nueva organización que con el nombre de CIMNE-Singapur impulsará actividades y proyectos de I+D+i en la región del sudeste asiático, en colaboración con el IHPC. El director de CIMNE-Singapur es el Dr. Alex Lee, investigador del IHPC.
Durante 2009 se han realizado diferentes visitas e inter-cambios entre investigadores de CIMNE y IHPC y se han ������Q��� �������� ���#~?~������� ���&������destaca el curso sobre los códigos de CIMNE GiD y Kratos que los investigadores de CIMNE Abel Coll, Pooyan Dad-vand y Enrique Escolano impartieron en la sede del IHPC en Octubre 2009.
CIMNE IN SINGAPORE
In recent years CIMNE has developed a close relationship with the Institute of High Performance Computing (IHPC) of Singapore. IHPC is a prestigious RTD organization belonging to the A*Start National Agency of the Singapore Government. This relationship has lead to the signing of a cooperation agreement between CIMNE and IHPC aiming to the development of joint RTD projects.
Several visits and interchange have taken place during 2009 between scientists from CIMNE and IHPC. The visits have served for defining a number of RTD projects of interest to both organizations. We note the course on the use of the CIMNE codes GiD and Kratos taught at the IHPC premises on October 2009 by CIMNE scientists Abel Coll, Enrique Escolano and Pooyan Dadvand.
The increasing cooperation between CIMNE and IHPC has motivated CIMNE to create a new organization in Singapore, named CIMNE-Singapore, with the objective to fostering RTD activities and projects in the South East Asia region in cooperation with IHPC. The director of CIMNE-Singapore is Dr. Alex Lee, a scientist in IHPC.
CIMNE-Singapore inaguration, 25th May 2010 P. Dadvand, L. Xin and A. Lee at CIMNE Singapore
33
NITTO - An integrated Software System for Modelling and Simulating Blood Flow in the Cardiovascular System to Deter-mine the Mechanical Properties of the Vessel Walls. NITTO DENKO01/12/2010 - 31/08/2011
GiD-KRATOS WorkshopOctubre 2009
^�%� ������������ ���!�������������������� interaction problemsCIMNE - IHPC01/2009-12/2012
Organization of the International Workshop on Advances in Computational Methods for Fluid-Structure interaction27-29 April 2011, Singapore
Support to the activities of the companies OMNI Ltd and ��� �?��?����\��������#
Support to the activities of the compay COMPASS Ingeniería y Sistemas SA
�� � �� �ACTIVIDADES / ACTIVITIES�������� �PROYECTOS / PROJECTS
E. Soudah and E. Oñate working in Nitto Project CIMNE team in the CIMNE Workshop on GiD and Kratos at IHPC
� ������� ���
�����<����2��������%�������2��4�����������������������KK��������F��.���������.����������5�������,����;�������9�����������2��������L����
E������5�1����������/�������F��.�������������������������������2��4���������������<����#���##������� ;����2������2�9����������2��4�����0���B���2���,������L��6����.������������������;���%�������2��4���������� ��,������5�����A������������ �HE +I���������2�������������.�������������������.��A���������2�����������������������������%���������5����,��������:����2��,����������A��������������2������ #$�;������������.�������������������������,������$�,������,��� ���,�������E������������:���4�����������.�����������������������5�������,���������L�������"*�������,�����"((-���������,������������������� #$�;���� <������������8��% �������������������,:<���V<��,4�����<��,��,�9������,����,��W� ������������ ���3���
35��8�"(�(�������2��������������������5�����������,����:�����1�����.�������� #$�9 �X��;�����������2���2��%������$��,�Q��Y����������C�������������� �X��;�1����5���2���5��2�������������������5�������������2��4����������KK��
CIMNE EN CHINA
Cimne ha impulsado diferentes proyectos y actividades de I+D+i en colaboración con centros de investigación, uni-versidades y empresas en China.
Fruto de esta continua colaboración son la coordinación de los proyectos como Aerochina I y II de la CE, la parti-����������������������������������%������"}���sobre riesgos naturales, diferentes proyectos del Progra-ma de Aeronáutica de la CE (FP7) y la cooperación en tra-bajos relacionados con cálculos de puertos y estructuras marinas frente al oleaje utilizando programas de cálculo desarrollados en CIMNE, iniciados con las visitas de los investigadores Miguel Angel Celigueta y Fernando Salazar junto con las diversas visitas de investigadores de China. ���K����&�������K���� ���&����������������"#$*�!�la Chinese Academy of Sciences y la Guangzhou Zhongjiao Erhang Engineering Design & Consultation Co. Ltd.
En 2010 se promovió la creación de una nueva organiza-ción que con el nombre CIMNE-Pekin, coordinado por el ���< ���$�%����������������Q� ������U��!���� �ocupa de impulsar y coordinar la actividad de proyectos de I+D+i.
Signature of the agreement between CIMNE, the Chinese Academy of Sciences and the Guangzhou Zhongjiao Erhang Engineering De-sign & Consultation Co. Ltd., CIMNE, Barcelona. May 26th 2009
CIMNE IN CHINA
CIMNE has promoted various projects and R & D in collaboration with research centers, universities and enterprises in China.
The result of this ongoing collaboration include coordination of projects and Aerochina I and II of the EC, the participation in the project financed by the Chinese government on natural risks, different projects on Aeronautics Program of the EC (FP7) and cooperation work in topics related to the analysis of harbours and marine structures under sea waves using soffware codes developed at CIMNE, wich begun with the visits of scientists Mr. Miguel Angel Celigueta and Mr. Fernando Salazar, and various visiting of scientists from China. On May 26th 2009 an agreement was signed between CIMNE, the Chinese Academy of Sciences and the Guangzhou Zhongjiao Erhang Engineering Design & Consultation Co. Ltd.
In 2010 CIMNE promoted the creation of a new organization under the name CIMNE-Pekin, coordinated by Professor Yuan Ming Wu of Beijing University, which is responsible for promoting and coordinating the activities of R + D + i.
At Beijing University
35
Dinner at Barcelona, February 2009 Prof. Ming Wu Yuan, Director of CIMNE-Pekin, and E. Oñate.
�������� �PROYECTOS / PROJECTS
?;�'�`J?�\�����������������������������������;���������!������!��� ���multiphysics simulation, validation anddesign in aeronautics, ���������� ���������������������������������������������������� !���������������������"�������#����!$����#������������� ��������!�������#����!$�"�����%&�����!�����%��������!����#��'(')'()*((+�,')(,)*((-
��� ���������������������������������������������-����������!�����������������������.����������������������������������"����� ������������/��������%����������������&����� ���"�����%&����������#0������"������ ��!�!������������������ ��������%!��������������������������"�������!����"�����������0���������12�')'()*('(��,()(3)*('*
��� ���������������������� ���������������������������������� �!����� ���������-�������������������������.�����������')'()*('(��,()(3)*(',
��"#� ������������������#�������������4�5�����-����������!����6*('(�*(',7�����8�������������������������� 9.�������":�5���������������%���������"�����������;;���<������;�5����������-��:������������
����!��
�� �
������
��������������
Aules CIMNE
Aulas CIMNE
CIMNE Classrooms
37
UNSA
INAUNT
FEMEC
IFSP
UTFSM
UniAndes
UNC
UCLV
ITESM
UGTO
CIMAT
PUCP
UCA
FICH
3��� ������ #$�� ���� ��2���� ������F��.������� ��� ������ �������� �� ����K�����������4���������2��� #$����������7��,��2�����������������3G�.4������2�����2���������������� #$��7�����2��9�������G��������������%�����������,���������2���,���� ��������������2���������2��4������ ��� �������� .A����� �� ��� �����9%��6���������������,���������F��.���������.���2������
�������5��8�"(((;��������������������9���� #$����,M����@
Las Aulas CIMNE son espacios de cola-boración en temas docentes y de I+D creados conjuntamente por CIMNE y uno o varios grupos universitarios. Las aulas CIMNE promueven actividades de forma-ción de grado y postgrado y el desarrollo de proyectos de Investigación básica y de transferencia de tecnología, en colabora-ción con empresas.
Desde el año 2000 se han creado las si-guientes Aulas CIMNE:
The CIMNE Classrooms are physical spaces for cooperation in education, research and technological development (RTD) activities created jointly by CIMNE and one or several universities. The CIMNE Classrooms promote educational and training activities at graduate and postgraduate levels and the development of RTD projects in cooperation with enterprises.
Since 2000 the following CIMNE class rooms have been created:
����
�
Las AuAulalas s CIC MNE son espapacicic osos de e cocola-boración en tetemamas docentes yy dd de e I+I+D creados conjuntamementtntee popor CIMNE y unnoo
grupos universitaaaririrriosos. Las aulas omueven activid
do y pos
The Cspace
Ferrol
UVAULUL
ETSEIATAT
FNBFN
EUETIB
CEAV
En EspañaAula Ferrol – CIMNE (España)
Universidade da Coruña Responsable: Pablo Fariñas y Alfonso GarcíaFecha de creación: 29/enero/2001Actividad: Aplicación de los métodos numéricos a problemas relacionados con la ingeniería naval.
Aula EUETIB – CIMNE (España)Escuela Técnica de Ingeniería IndustrialResponsable: Gabriel Bugeda y Daniel Di CapuaFecha de creación: 18/julio/2001Actividad: Simulación de estampaciones de cha-pas, llenado de moldes y cálculo de estructuras
Aula UVA – CIMNE (España)Universidad de Valladolid Responsable: Antonio FocesFecha de creación: 18/abril/2002Actividad: Proyectos de ingeniería civil, de puer-tos, naval, industrial, aeronáutica y arquitectura.
Aula FNB – CIMNE (España)Facultad de Náutica de BarcelonaResponsable: Julio GarcíaFecha de creación: 1/marzo/2002Actividad: Aplicaciones de los métodos numé-ricos a problemas relacionados con ingeniería naval.
Aula UL – CIMNE (España)Universidad de LleidaResponsable: Manuel Ibáñez y Jordi CiprianoFecha de creación: 24/julio/2004Actividad: Métodos Numéricos aplicados a la físi-ca de los edificios y docencia por internet sobre energías renovables.
Aula ETSEIAT – CIMNE (España)UPC deTerrassaResponsable: Roberto FloresFecha de creación: 20/abril/2007Actividad: Ingeniería industrial y aeronáutica.
Aula CEAV – CIMNE (España)Centro de Estudios AvanzadosResponsable: Gabriel Molina Fecha de creación: 16/octubre/2010Actividad: Medio ambiente, tecnologías de la información y de la comunicación y en turismo.
En LatinoaméricaAula INA – CIMNE (Argentina)
Instituto Aeronáutico UniversitarioResponsable: Carlos SaccoFecha de creación: 5/septiembre/2002 Actividad: Aplicaciones de los métodos numéricos a problemas relacionados a la mecánica de fluidos, estructuras, transferencia de calor, etc.
Aula FICH – CIMNE (Argentina)Universidad Nacional del LitoralResponsable: Sergio IdelsohnFecha de creación: 28/octubre/2002Actividad: Aplicaciones de los métodos numé-ricos a problemas relacionados con recursos hídricos, ingeniería mecánica e ingeniería infor-mática.
Aula UNT – CIMNE (Argentina)Universidad Nacional de TucumánResponsable: Guillermo EtseFecha de creación: 01/noviembre/2002Actividad: Desarrollo de modelos computacionales de puentes (degradaciones y mecanismos de re-paración).
Aula UNSA – CIMNE (Argentina)Universidad Nacional de SaltaResponsable: Dr. Liz NallimFecha de creación: 10/abril/2008Actividad: Desarrollo de modelos computaciona-les de aplicación en ingeniería civil.
Aula FEMEC – CIMNE (Brasil)Universidad Federal de UberlândiaResponsable: Sonia GoulartFecha de creación: 25/abril/2004Actividad: Aplicaciones relacionadas con los procesos de estampación de chapa y diseño de moldes.
Aula IFSP – CIMNE (Brasil)Instituto Federal de Educaçao, Ciéncia e Tecologia de Sao PauloResponsable: Écio NavesFecha de creación: 1/julio/2009Actividad: Aplicaciones de los métodos numéricos para la solución de los problemas de ingeniería.
Aula UTFSM – CIMNE (Chile)Universidad Técnica Federico Santa MaríaResponsable: Franco PerazzoFecha de creación: 05/marzo/2004Actividad: Métodos numéricos en ingeniería mecá-nica. Desarrollo de Métodos numéricos.
Aula UniAndes – CIMNE (Colombia)Universidad de los AndesResponsable: René MeziatFecha de creación: 24/enero/2003Actividad: Docencia e investigación en Métodos Numéricos, optimización, principios variacionales y mecánica computacional.
Aula UNC – CIMNE (Colombia)Universidad Nacional de ColombiaResponsable: Jorge HurtadoFecha de creación: junio/2005Actividad: Métodos numéricos aplicados a la in-geniería civil.
Aula UCLV – CIMNE (Cuba)Centro de Investigación y Desarrollo de las Est. y los Materiales, Sta. ClaraResponsable: Carlos RecareyFecha de creación: 16/julio/2003Actividad: Modelación y análisis de estructuras y el terreno con la aplicación de Métodos Numéricos.
Aula UCA – CIMNE (El Salvador)Universidad Centroamericana “José Simeón Cañas” UCAResponsable: Mauricio PohlFecha de creación: 12/febrero/2010 Actividad: Aplicaciones de Ingeniería Civil, así como optimización y aplicaciones multi objetivo.
Aula UGTO – CIMNE (México)Universidad de GuanajuatoResponsable: Jesus Gerardo ValdesFecha de creación: 16/enero/2002 Actividad: Aplicaciones de Ingeniería Civil, así como optimización y aplicaciones multi objetivo.
Aula ITESM – CIMNE (México)Instituto Tecnológico de Estudios Superiores de Monterrey Responsable: Sergio GallegosFecha de creación: 18/mayo/2009 Actividad: Aplicaciones de los métodos numéri-cos en la ingeniería civil.
Aula CIMAT – CIMNE (México)Centro de Investigaciones en MatematicasResponsable: Miguel Angel MorelesFecha de creación: 26/Junio/2006Actividad: Matemática aplicada, métodos numé-ricos, bioingeniería, análisis estadístico.
Aula PUCP – CIMNE (Perú)Universidad Católica de Perú Responsable: Quino Valverde y Salvador BotelloFecha de creación: 16/abril/2009 Actividad: Modelación y análisis de estructuras y el terreno con la aplicación de Métodos Nu-méricos.
Aula INABIOX – CIMNE (Venezuela)Universidad Central de VenezuelaResponsable: Miguel CerrolazaFecha de creación: 15/febrero/2004Actividad: Aplicaciones de los métodos numéri-cos a problemas relacionados con Bioingeniería.
Aula UCLA – CIMNE (Venezuela)Universidad Centrooccidental “Lisandro Alvaro” (UCLA)Responsable: Juan Carlos Vielma PérezFecha de creación: 20 Octubre 2008Actividad: Aplicaciones de los métodos numéri-cos a problemas de ingeniería civil.
Aula UC – CIMNE (Venezuela)Universidad de CaraboboResponsable: David OjedaFecha de creación: 29 abril 2009Actividad: aplicaciones de los métodos numé-ricos en optimización, problemas inversos y análisis de falla en ingeniería.
39
������ �����������������������!������ ��������
IV REUNIÓN GENERAL DE LA RED DE AULAS CIMNE, UPC
THE IVTH GENERAL MEETING OF THE CIMNE CLASSROOM NETWORK, UPC
��������2������������������������#�%��9����Z�� �������P��������;������4�����;�"((-
Bajo la presidencia de S.A.R. la Infanta Doña Cristina
Barcelona, 1 de julio, 2009
Chaired by H.R.M. la Infanta Doña Cristina
Barcelona, July 1st, 2009
�,������Z���;������������ #$�;���������.�����,������������3��#�%�������8�� �������
Eugenio Oñate, Director de CIMNE, da la bienvenida a S.A.R La Infanta Doña Cristina
Eugenio Oñate, the Director of CIMNE, gives the welcome to S.A.R Infanta Dona Cristina
E���,��0�����,��2���������5�2�������������S�������
Fotografía de grupo durante el aperitivo de la Jornada
Photography of group during the snack of the meeting
"������������������ ���� ���� ���������������!������ ���
1ª JORNADA SOBRE BIOINGENIERÍA DE LA RED DE AULAS CIMNE
1ST SEMINAR ON BIOENGINEERING OF THE CLASROOMS CIMNE
Red de Aulas CIMNE 1ª Jornada sobre BioingenieríaMérida, Venezuela, 24 y 25 de marzo de 2010
En el marco del CIMENICS 2010 X Congreso Internacional de Métodos Numéricos en Ingeniería y Ciencias Aplicadas
Activitats de formació
Actividades de formación
Training activities
41
����
#$�� ��,����:�� ��,��������� ������� �� ���������� ������������ ��.� ��� ������� �� �2���������� ������6���������6����������,��8������������������������B������,������������������2��%�����������5���������5��,��8�������%��������������6������
������������8��"((-9"(�(� #$��<����,����:����������������������������,M����@
CURSOS
CIMNE organiza regularmente cursos y seminarios relacionados con la teoría y apli caciones de los métodos numéricos en Ingeniería. Los cursos van dirigidos a graduados recientes y profesionales pro-venientes de escuelas de Ingeniería y facultades de ciencias.
Durante los años 2009-2010 CIMNE ha orga nizado los siguientes cursos y seminarios:
COURSES
CIMNE regularly organises courses and seminars related to the theory and application of numerical methods in engineering. The courses are addressed to recent university graduates and professionals from schools of engineering and applied sciences universities.
In the years 2009-2010 CIMNE has organised the following courses and seminars:
Curso de máster “Métodos numéricos para cálculo y diseño en ingeniería” ON LINEXX edición, 2009XXI edición, 2010
Master of science in computational mechanics. An Erasmus Mundus Master Course. Septiembre 2009Septiembre 2010
Curso de master “Métodos numéricos en Ingeniería”. Versión presencialSeptiembre 2009Septiembre 2010
Cálculo de estructuras por el método ��� ����������������������� ON LINEInicio de clases: 25.03.2009/2010
COMPLAS Course11th. Short Course on Computational Techniques for Plasticity5-6 Septiembre 2009Barcelona
estructuras por el métodoCálclculoo de e COMPLAS Course
1. Condiciones de contorno absor-bentes dinámicas para problemas advectivos-difusivos con invariantes de Riemann desconocidos Mario Storti 19.02.2010
2. Advanced Computational Methods for FEM in High Performance Com-puters Alvaro Coutinho 23.02.2010
3. Computational Food Engineering: Perspectives and Case Studies Gianpaolo Ruocco 01.03.2010
4. Adaptive Soroban Grid CIP Method for Fluid-Structure Interaction Takashi Yabe 03.03.2010
5. Fragmentation without Limits: a scalable discontinuous Galerkin framework Raul Radovitzky 09.04.2010
6. Application of the discrete element method to modelling of rock cutting and other engineering problems Okan Su 14.04.2010
7. Fluid-structure interaction in fast transient dynamics Folco Casadei 31.05.10-04.06.10
8. Molecular Dynamics Simulation lea-ding to structural and mechanical pro-perties of porous silica is presented Guillermo Rein 04.06.2010
9. Modelling and simulation of particles ������� Peter Wriggers 10.06.2010
10. Optimization of Stents for Coronary and Cerebral Applications K. Srinivas 22.06.2010
11. Shock Hydrodynamics on Tetrahedral Finite Elements with a Variational Multiscale Method Guglielmo Scovazzi 17.06.2010
12. Short Course: Advanced techniques for FSI and optimization problems Roland Wuechner 30.06.2010
13. Biomechanical Imaging: Inferring Tis-sue Microstructure and Pathology Assad Oberai 26.10.2010
14. Seminario en Bioingeniería M. Cerrolaza, E. Oñate 11.11.2010
15. Multiple scale methods for subgrid ���� ����������!����� Assad Oberai 30.11.2010
16. Some Fundamental Problems in Numerical Simulation of Reactive Flow Elaine Oran, NIST, USA 21.04.2009
17. ���������������� ������������-rante el terremoto de l'Aquila (Italia) de abril de 2009. Alex Barbat, UPC 13.05.2009
18. Nonlinear Analysis Methods for the Seismic Response Evaluation of Structures/Métodos de Análisis no li-neal para la evaluación de la respues-ta sísmica de estructuras Filip C. Filippou, Dept. of Civil and Environmental Engineering Univ. of California, Berkeley, USA 22.05.2009
19. Underwater implosion Kazem Kamran, CIMNE10.06.2009
20. Analytical Damage Mechanics for prediction of initiation, evolution and fracture of laminated composites Ever J. Barbero, West Virginia Univ., USA25. 06.2009
21. Un modelo de crecimiento isótropo para tejidos biológicos Facundo Bellomo, CIMNE30.09.2009
22. Anisotropic netric based adapta-tion applied to compressible euler equation Frédéric Alauzet, INRIA, France27.10.2009
23. Resolución paralela de sistemas de ecuaciones lineales precondicionados mediante factorizaciones Alberto F. Martín, España09.11.2009
24. Computational mechanics in det norske veritas (DNV) Olga Shipilova, Lappeenranta Universi-ty of Technology, Finland 1.12.2009
�� ��� �
SEMINARIOS
SEMINARS
2010
2009
2010
2009
43���#����� ���
CAFÉS DE CIMNE
CIMNE COFFEE TALKS
13/01/10 — A Mixed Lagrangian and Eulerian FSI Approach for Simulation of Overtopping on Embankment Dams. A. Larese
03/02/10 — ;��������� ���'������%�Evolutionary Optimisation in Engineering. C. DongSeop
17/02/10 — CIMNE, la investigación y la empresa: una relación entre iguales. M. Scamuzzi
03/03/10 — Shared Memory parallelism for FE – OpenMP and beyond. P. Dadvand / R. Rossi / J. Stascheit
17/03/10 — Sesion practica e iterativa sobre Linux: consultas de los asistentes. M. Pasenau
07/04/10 — New developments in maximum-entropy approximants and ��� ����������!������ ����� ���# A. Rosolen
21/04/10 — Posiciona tu artículo/pro-yecto/persona en los primeros puestos de Google. P. Franzolini
29/04/10 — ���������\�������������los Cafés de CIMNE en Castelldefels. PA. Ubach
05/05/10 — Nonlinear manifold description from scattered points for meshfree thin shell analysis. D. Millan
13/05/10 — Robust Design Optimi-=��������|���������>�������������techniques. J. Pons
19/05/10 — Protección de los resulta-dos de proyectos de investigación. Ò. Carbó
02/06/10 — Numerical Simulation of the Urinary Bladder. V. Monteiro
09/06/10 — Explotación del espacio. J. Tristancho
16/06/10 — Estándares de formato de video y tratamiento digital de animacio-nes para presentaciones. M. Pasenau / MÁ. Celigueta
30/06/10 — No Trick, No Track. M. Chiumenti
13/07/10 — Work and Storage Estima-tes for High Order Elements R. Lohner
06/10/10 — ; �����������������������������������#G. C. Buscaglia
20/10/10 — CIMNE en Bolivia, Gene-ración de capacidades de investigación. J. Marti
03/11/10 — Advances in mesh deforma-tion technique for unstructured mesh. A. Zhou
17/11/10 — ����������� ��� ����-llas triangulares y tetrahédricas. N. Lafontaine
24/11/10 — GRUPO TIC. J. Jimenez / A. Tena / F. Campà
15/12/10 — ¿Es cierta la frase: Publish or Perish?. PA. Ubach
14/01/2009 — Últimas mejoras de PFLOW MÁ. Celigueta / S. Latorre
28/01/2009 — GiD: Presente y futuro. GiD Team
25/02/2009 — Recent developments in the "contact domain method". S. Hartmann
11/03/2009 — El método FM-ALE apli-cado a la resolución de problemas de Interacción Fluido-Estructura. J. Baiges
18/03/2009 — MATURE Project Pre-sentation. P. Franzolini
1/04/2009 — Acreditaciones en inves-tigación y docencia: papeleo, rigidez y ���������� �����������������# J. Mora y PA. Ubach
6/05/2009 — Numerical Simulation of Crack Propagation in Ferroelectric Materials. A. Abdollahi
13/05/2009���������������� ������������-rante el terremoto de l'Aquila (Italia) de abril de 2009. A. Barbat
27/05/2009 — Hacia una implantacion internacional de cimne basada en la excelencia. E. Oñate
10/06/2009 — Underwater Implosion. K. Kamran
7-8/07/2009 — CIMNE-RMEE's inter-nal workshop on applied parallelism to Numerical Methods
16/09/2009 — Procesamiento de imá-genes médicas 3D para el estudio de las � ������������ ���������%������� ����la cardiopatía isquémica. G. Gavidia
30/09/2009 — Un modelo de creci-miento isótropo para tejidos biológicos. F. Bellomo
6/10/2009 — [���� �=������������aorticos a través de MRI. J. Pennecot
21/10/2009 — A High-Resolution Petrov-Galerkin method for the 1D convection-diffusion-reaction problem. P. Nadukandi
28/10/2009 — Aproximantes de máxima entropía y aplicaciones. M. Arroyo
11/11/2009 — Analysis of burning and �� �������������������������������!�!������� ������� ��������!��#J. Marti
2/12/2009 — 2D numerical simulation of composite materials and structures using the unit cell homogenization approach. H. Badillo
��� �%6����� #$�����������������5���<������,����:����2����������,�9����� ���� �������� ���� ��������� ���2���������5�����%6����.�����,����8�0�����:����.������.�����.���������9���,�����������������Los Cafés de CIMNE son seminarios de una hora organizados por investi-gadores del centro. Cada seminario va precedido de un café de bienvenida y ����>�������������� �����������-do del seminario.The CIMNE Coffee Talks are seminars of one hour organized by CIMNE researches. Each talk goes preceeded of a welcome coffee and ends up with a debate on the content of the talk.
����
CURSOS
COURSES
��� ��� �-!+;� #$��<�� ��,����9:�����)�����������&(9'(�<�������&&)�������������.�������������,�A0���
D��.7� <�� ��,����:��� ""� ������� ����A�������.����6���������6�����2������A����� ��������8������,��8����;�������F��.���������.����C �
Des de 1987, CIMNE ha organitzat 115 cursos de 30-40 hores i 335 seminaris �����& �&���%���� �
També ha organitzat 22 cursos de màster sobre mètodes numèrics per a càlcul i disseny en enginyeria, en ��������������&������U"�
Since 1987, CIMNE has organised some 115 short courses and 335 seminars on various topics in computational engineering.
CIMNE has also organised 22 Master courses on Numerical Methods in Engineering in collaboration with UPC.
Seminaris/Seminarios/Seminars Cursos/Curos/Courses Cafès de CIMNE/Cafés de CIMNE/CIMNE Coffe Talks
45
www.cimne.com
CENTRO VIRTUAL DE ESTUDIOS
CIMNE ha desarrollado un entorno web para impartir a distancia, vía Internet, cursos de formación contínua.
El Centro Virtual de Estudios permite la relación a distancia entre alumnos y profesores del curso a través de Internet.
El Centro Virtual está en funcionamiento permanentemente las 24 horas del día para canalizar todas las relaciones entre los alum-nos, profesores y gestores del curso. El Centro Virtual permite que todas las personas relacionadas con un curso realicen sus tareas a través de sus respectivas áreas.
En el Centro Virtual los alumnos tienen la última información dis-ponible en todas las asignaturas y cualquier otro tema relativo al curso, de tipo académico o administrativo (matriculación, consul-tas, etc). A través del Centro Virtual se realizan las tutorías del cur-so, se sigue el rendimiento académico de los alumnos y se llevan a cabo ejemplos y ejercicios.
A través del Centro Virtual de Estudios se imparte el curso de Máster en Métodos Numéricos para Cálculo y Diseño en Ingeniería y otros cursos de postgrado de CIMNE.
VIRTUAL LEARNING CENTRE
CIMNE has developed a web environment for distance learning education via Internet. The Virtual Center of Continuing Education of CIMNE allows the interaction between students and educators in courses via the Iternet.
The Virtual Center of CIMNE is useful in gathering information early on in a course to facilitate the registration process. Teachers can also follow the student progress and carry out the different tutorials and exercises.
The Virtual Center operates 24 hours a day to channel all relationships between students, educators, and administrators involved in the course.
Through the Virtual Center of CIMNE students can access the latest information on the various courses and any other academic or administrative matters related to the course.
The Virtual Center of CIMNE hosts the Master Course in Numerical Methods in Engineering and other postgraduate courses of CIMNE.
������� ������!���
#$��<�����������2�������������J�.�2�����2������������A����;�����#�������;�����������%�������������������
�� �����������������A����%������������2�������������"'�<�������������2����������:�����������������9�����������������������;�����2��%�������������,�����������������
����� ���������������������������������������������%�����������2���.��������������������,�������������1�������������������������������������;� ����������2�������6���������������������� H������������;����������;�����I�
������7������ �����������������������:������������������������;������,����������������������6��������G�����������������������������2����������������
����� ���������������G��������5��2���������� �������$A��������$6���������6�����2������ A���������������8�����,��8��������5�����������������2���,�������� #$��
Congressos
Congresos
Conferences
47
2011
PARTICLES 2011
II International Conference on Parti-cle Based Methods Fundamentals and Applications 26 - 28 October 2011Barcelona, Spain
MEMBRANES 2011
V International Conference on Textile �������������J������ �@���������5 - 7 October 2011Barcelona, Spain
MARINE 2011
IV International Conference on Compu-tational Methods in Marine Enginering28 - 30 September 2011Lisbon, Portugal
AIG-9
9th International Symposium on Applied isotope Geochemistry19-23 September 2011Tarragona, Spain
COMPLAS XI
International Conference on Computa-tional Plasticity 7 - 9 September 2011Barcelona, Spain
EUSIPCO 2011
European Signal Processing Conference 29 August - 2 September 2011Barcelona, Spain
BIFD 2011
IV InternationalSymposium Bifurcations and Instabilities in Fluid�¡����� >����Barcelona, Spain
COUPLED PROBLEMS 2011
IV International Conference on Coupled Problems in Science and Engineering �������������Kos Island, Greece
ADMOS 2011
V International Conference on Adaptive Modeling and Simulation¢�¡��������Paris, France
CFRAC 2011
Inter. Conference on Computational Modeling of Fracture and Failure of Materials and Structures¢�¡��������Barcelona, Spain
CODAWORK 2011
4th. Workshop on Compositional Data Analysis 9 - 13 May 2011Girona, Spain
2011
2011
��������
#$��<����,����:���-&����,�������������A�������������������������������
��,�������"((-9"(��@
CONGRESOS
CIMNE ha organizado 93 congresos de ámbito nacional e internacional.
Congresos 2009-2011:
CONFERENCES
CIMNE has organised 93 national and international conferences.
Conferences 2009-2011:
MS 2011
on and
GID 2010
5th Conference on Advances and Appli-cations of GiD & 1st Kratos Workshop26 - 27 May 2010Barcelona, Spain
CHARMEX
2nd. International Workshop26 - 28 May 2010Barcelona, Spain
DSPDES10
Emerging Topics in Partial Diferential Equations and Dynamical Systems����>����������Barcelona, Spain
INTERNATIONAL BEACON SATELLITE SYMPOSIUM
£�����������Barcelona, Spain
IPPW7
7th International Planetary Probe Workshop 2010����¡��������Barcelona, Spain
WATER RESOURCES
XVIII International Conference on Com-putational Methods in Water Resources�������������Barcelona, Spain
DATA ANALYSIS
Short Course and Open Seminar on Compositional Data Analysis¤�¥�� >����Barcelona, Spain
FIFTH INTERNATIONAL
Conference on Unsaturated Soils6-8 September 2010 Barcelona, Spain
23ND. NORDIC SEMINAR ON
Computational Mechanics21 - 22 October 2010Stockholm, Sweden
GNSS-R 2010
Global Navigation Satellite Systems 21 - 22 October 2010 Barcelona, Spain
BIOSEMINARIO
Seminario en Bioingeniería11 de Noviembre de 2010Barcelona, España
4a�'�?^?@;^|�;�
29 de Noviembre de 2010Barcelona, España
2010
2010
2010
49
SEDUREC 2009
International Symposium on Safety and Durability of Materials and Constructions25 - 27 February 2009Barcelona, Spain
COMFORT AND COOLING
International Workshop Summer Comfort and Cooling31 March - 1 April 2009Barcelona, Spain
ADMOS 2009
International Conference on Adaptive Modeling and Simulation25 - 27 May 2009Bruxelles, Belgium
DYNAMICS AND CONTROL
15th International Workshop on Dyna-mics and Control����>���������¥Tossa de Mar, Spain
COUPLED PROBLEMS 2009
Computational Methods for Coupled Problems in Science and Engineering¡����������¥Ischia Island, Italy
MARINE 2009
Conference on Computational Me-thods in Marine Engineering�¤��£�������¥Trondheim, Norway
CMNI - 2009
Congreso de Métodos Numéricos en Ingeniería 2009�¥��������� �����¥Barcelona, España
COMPLAS 2009
10th. International Conference on Computational Plasticity - Fundamen-tals and Applications2 - 4 September 2009Barcelona, Spain
MEMBRANES 2009
IV International Conference on Textile �������������J������ �@���������5 - 7 October 2009Stuttgart, Germany
ICSMM 2009
2nd International Conference on Sus-tainability Measurement and Modelling5 - 6 November 2009Barcelona, Spain
ZNS 09
����������J�%������������ �{���no Saturada del Suelo18 - 20 Noviembre 2009Barcelona, España
PARTICLE 2009
International Conference on Particle-Based Methods Fundamentals and Applications25 - 27 November 2009Barcelona, Spain
2009
2009
2009
Publicacions
Publicaciones
Publications
51���� ��� ���
PUBLICACIONES
PUBLICATIONS
#$��2�.��������.���;���������;�����,��0��;����.����������/0�������%�J������������������������������������.��������������2��������������6���������6����������,��8�����
�.������������� #$���������������8��"((-9"(�(@
CIMNE publica libros, revistas, monogra-<�� !�������� �������� ��� �<�������-cativo en temas relacionados con la teoría y aplicaciones de los métodos numéricos en ingeniería.
Publicaciones de CIMNE durante los años 2009-2010:
CIMNE publishes books, journals, monographs, scientific reports and educational software related to the theory and applications of numerical methods in engineering.
Publications of CIMNE during 2009-2010:
Estabilidad de Estructuras. Una perspec-tiva histórica, Luis A. Godoy, 270 pp., CIM-NE, 2010, ISBN: 978-84-96736-80-1
Finite Rotation Shells Basic Equations and Finite Elements for Reissner Kine-matics, K. Wisniewski, 483 pp., CIMNE, 2010, ISBN: 978-90-481-8760-7
Mecánica del Medio Continuo: Concep-tos Básicos, Eduardo Walter Vieira Chaves, 458pp, CIMNE, 2010, ISBN: 978-84-96736-38-2
; �������� ��� �������������#[� 2, Mecánica de sólidos, O.C. Zienkiewicz y R.L. Taylor, 765 pp.,CIMNE, 2009, ISBN: 978-84-96736-72-6
; �������� ��� �������������#[� ��^����������������O.C. Zienkiewicz, R.L. Taylor y P. Nithiarasu, 512 pp., CIMNE, 2009, ISBN: 978-84-96736-73-3
Mecánica del medio continuo: modelos constitutivos, E.W. Chaves, 389 pp., CIM-NE, 2009, ISBN: 978-84-96736-68-9
]�}�� ��������������������� ������-tures iv, E. Oñate and B. Kröplin, 22 pp., CIMNE, 2009, ISBN: 978-84-96736-70-2
Computational plasticity x. Funda-mentals and applications, E. Oñate, D.R. J. Owen and B. Suárez, 34 pp., CIMNE, 2009, ISBN: 978-84-96736-69-6
Particle-Based Methods: Fundamen-tals and Applications, E. Oñate and D.R.J. Owen, 463 pp., CIMNE, 2009, ISBN: 987-84-96736-82-5
; �������� ��� �������������#[� 1, Las bases, O.C. Zienkiewicz, R.L. Taylor y J.Z. Zhu, 890 pp., CIMNE, 2009, ISBN: 978-84-96736-71-9
Computational methods in marine en-gineering III, T. Kvamsdal, B. Pettersen, P. Bergan, E. Oñate and J.García, 359 pp., CIMNE, 2009, ISBN: 978-84-96736-66-5
Computational methods for coupled problems in science and engineering III, ��� �����������������������������������30 pp., CIMNE, 2009, ISBN: 978-84-96736-65-8
Adaptive modeling and simulation 2009, Ph. Bouillard and P. Díez, 220 pp., CIMNE, 2009, ISBN: 978-84-96736-64-1
3��.����O�Libros / Books
��%�J�����5��,��8�����O�Software de Ingeniería / Engineering software
GiD-The personal pre/post processor, The universal, adaptive and user frien-dly pre and post processing system for computer analysis in science and engi-neering, new version 10, CIMNE, 2010
���������O�Revistas / Journals
Revista internacional de Métodos Nu-méricos para Cálculo y Diseño en In-geniería. Editores: E. Oñate y J.C. Heinrich, [� #�¤�����������J�;����¡�[� #�¢�����������J�;����¥
$���,��0��OMonografías/Monographs
Aplicación del método PFEM a la si-mulación de procesos de transferencia propios de la industria pulvimetalúrgica, C. González, J.C. Cante, X. Oliver, CIMNE M117, 2010
GiD 2010, 5th Conference on advan-ces and applications of GiD 1st Kra-tos Workshop, M. Pasenau, E.Escolano, J. Suit, A. Coll, A. Melendo, A.Monros, F.Chico, P.Dadvand, CIMNE M118, 2010
Multi-scale techniques for masonry structures, V. Ciampi, S. Oller, D. Addesi, CIMNE M119, 2010
Flood. An open source neural networks C++ Library, R. López, CIMNE M120, 2010
Lagrangian FE methods for coupled ���� ������������!������ P. Ryzhakov, E. Oñate, R. Rossi, S. R. Idelsohn, CIMNE M121, 2010
Reliability problems in earthquake en-gineering, J. E. Hurtado, CIMNE MIS63, 2010
Numerical Simulation of Multi-Fluid _ ������! �!� \����� � ����� � �����methods, M. de Mier, S. Idelsohn y E. Oña-te, CIMNE M115, 2010
A new approach in computational con-tact mechanics: the contact domain method, X. Oliver, S. Hartmann, J.C. Cante, R. Weyler, J.A. Hernández, CIMNE M112, 2009
Modelo higro-termo-mecánico para es-tructuras de hormigón armado expues-tas al fuego, D. Di Capua, A. Mari, E. Oñate, CIMNE M113, 2009
Numerical Modelling of Crack Forma-tion in Powder Compaction Processes, J.A. Hernández, X. Oliver, J.C. Cante, CIMNE M114, 2009
Modeling of Ground Excavation with the Particle Finite Element Method, J.M. Carbonell, E. Oñate y B. Suárez, CIMNE M116, 2009
Nonlinear analysis of orthotropic membranes and shell structures in-� ������������������������������� J.G. Valdés, E. Oñate, J. Miquel, CIMNE M107, 2008
Seismic Protection of Cable-Stayed ���������� >�������%��������������G. E. Valdebenito y Á. C. Aparicio, CIMNE MIS62, 2009
�.���������������������O�Publicaciones de investigación / Research reports
Innovative numerical tools for the si-mulation of parachutes, E. Ortega, R. Flo-res, E. Oñate, C. Sacco, E. González, CIMNE PI341, 2010
Advances in the simulation of multi-�����������! �!������� ������� �-ment method Application to bubble dynamics, M. De Mier, S. Idelsohn, E. Oñate, CIMNE PI342, 2010
A 3D low-order panel method for uns-teady aerodynamic problems, E. Ortega, R. Flores, E. Oñate, CIMNE PI343, 2010
53
Interface GiD-SAP-2000-URLM. Aplica-ción práctica a la modelización virtual ������������ ����������!���������F. Muñoz, J. Maristany, J. López-Rey, CIMNE PI344, 2010
\������ ����� �� �!� ������ � ����� � �-ment method in computational mecha-nics, E. Oñate, S. Idelsohn, M. A. Celigueta, R. Rossi, S. Latorre, CIMNE PI345, 2010
Two-noded beam element for compo-site and sandwich beams using Timos-!���� �!���> ��� ������=��=������-matics, E. Oñate, A. Eijo, S. Oller, CIMNE PI346, 2010
?�%��������!������� ������� �����method (PFEM) for solving coupled problems in engineering, E. Oñate, S.R. Idelsohn, M. A. Celigueta, R. Rossi, J. Marti, J. M.Carbonell, P. Ryzhakov, B. Suárez, CIMNE PI347, 2010
Análisis numérico de los fenómenos hidrodinámicos en escolleras con apli-caciones a presas de materiales sueltos, R.J. Hernández, A. Larese de Tetto, E. Oñate, CIMNE PI348, 2010
Modelling thermoplastic melt spread �%�� ��������� ������� ������� �� K. M. Butler, E. Oñate, R. Rossi, J. Marti, S. Idelsohn, CIMNE PI349, 2010
@�=���������� ��� �=���������� ����-city, M. Cervera and M. Chiumenti, CIMNE PI331, 2009
\����� ��������!������� ������� �����method for complex coupled problems �� ���� ��� �� �� ���!������ E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, CIMNE PI332, 2009
�� ����������������� >������������!�!������� ������� ��������!���CIMNE PI333, 2009
A numerical investigation of wind tun-nel model deformation caudes by the twin-sting system, R. Flores, E. Ortega y E. Oñate, CIMNE PI334, 2009
A neural networks approach to aerofoil noise prediction, K. Lau, R. López, E .Oña-te, CIMNE PI335, 2009
Optimizing rock cutting through computer simulation, J. Rojek, E. Oña-te, C.Labra, H. Kazal, J. Akerman, CIMNE PI336, 2009
?�������������!������ %��!� ��water equations, C. Buachart, E.Ortega, E.Oñate, CIMNE PI337, 2009
La ciència a l’ enginyeria. El llegat de l’École Polytechnique, X. Oliver, CIMNE PI338, 2009
Las ingenierías: Unas profesiones de largo recorrido, B. Suárez, CIMNE PI339, 2009
Fuel cells state of the art, A. Jarauta y J. Pons, CIMNE PI340, 2009
#�%�������6������O�Informes técnicos / Technical reports
[����������>%� ���������] ~̂#¦�����;}�!����_ ��§>¦]�> �������������with entry widget”, CIMNE IT551, 2009
[����������>%� ���������] ~̂#¦�����;}�!����_ ��§>¦]�> �������������with entry widget”, CIMNE IT552, 2009
������ �Q��#���������� J. Pennecot, J. Suite y E. Soudah, CIMNE IT553, 2009
Ejemplos de construcciones con estruc-turas hinchables, CIMNE IT554, 2009
International Center for Numerical Me-thods in Engineering (CIMNE). Twenty years on, E. Oñate, CIMNE IT555, 2009
Propuestas de proyectos de I+D+I de CIMNE de posible interés para CEPSA, CIMNE IT556, 2009
Diseño de un cajón multicelular Tipo para el muelle AZ-2 adosado al dique de Zierbena Puerto de Bilbao, CIMNE IT557, 2009
Propuestas de proyectos de I+D+I de CIMNE de posible interés para CEPSA, B. Suárez, CIMNE IT558, 2009
Informe Europrincipia Muelle Interior Cajon 6m, B. Suárez, CIMNE IT559, 2009
Numerical modelling of heat transfer processes associated with the melting of polymers, A. Solether, CIMNE II560, 2009
TUNCONSTRUCT -Technology Inno-vation in Underground Constructions, J. Rojek, J. Akerman, H. Kargl, U. Restner, CIM-NE IT561, 2009
A segregated approach for strong ���� ��� �� ����� � ����� �� %��� ������ �������������� ������������ C. Corte, CIMNE IT562, 2009
Fluid-structure interaction of elastic cylindrical structures with moderately !��! ����� ��� ���� C. Corte, CIMNE IT564, 2009
3���2�.������������� #$�����2�������������������1������������7���5#����������JJJ����������
Las publicaciones de CIMNE se pueden consultar y adquirir a través de Internet en www.cimne.com The publications of CIMNE can be
visited and ordered via Internet in www.cimne.com
1. Fluid -structure interaction mode-lling 2. Geometric nonlinearty. 3. Impli-cit time integration. 4. Extensions on a coupling interpolator library for data ������!���� ������� ������������������� ��������!���C. Corte, CIMNE IT563, 2009
?������ >�����������������!������-��� ��������� �������������������interaction, E. Oñate, C. Corte, J. Garcia, CIMNE IT565, 2009
]!�������������� ��� ������ �����and elastic cylindrical structures, E. Oña-te, C. Corte, J. Garcia, CIMNE IT566, 2009
Incremental Sheet forming: A Nowadays version, O. Fruitos, J. Marques, A. Ferriz, CIMNE IT567, 2009
Metodología para la simulación de procesos electromagnético-mecánicos acoplados. Simulaciones 3D y valida-ciones experimentales preliminares, R. Mendez, A. Férriz, O. Fruitos, R. Otín, CIMNE IT568, 2009
Análisis numérico y analítico de depo-sición de inconel 718® sobre una base rectangular, O. Fruitos, Alex Maymo, CIM-NE IT569, 2009
�J�; %���������� �� �!� %� ���������� >�����¨����� ���������������A. Larese and E. Oñate, CIMNE IT570, 2009
Implementation fo Automated Bench-marking module for Kratos, F. Mossaibey, CIMNE IT571, 2009
SEDUREC 2009 International Sympo-sium on Safety and Durability of Ma-terials and Constructions, 25-27 Fe-bruary 2009, Barcelona, Spain , CIMNE IT572, 2009
Research lines and RTD Project in Bio-medical Engineering, CIMNE IT573, 2009
PC SENSOR: Sistema para la monito-rización y control de paracaídas, inte-grando sensores inalámbricos, métodos de simulación y técnicas de inteligencia �������� # _J]�����������£��¡� \����2007 (MITYC), S. Benolol, A. Tena, J. Jimé-nez, E. Oñate, CIMNE IT574, 2009
PC SENSOR2: Sistema para la monito-rización y control de paracaídas, inte-grando sensores inalámbricos, métodos de simulación y técnicas de inteligencia �������� # ]@J�����������¡��¡�?[?-ZA I+D 2008 (MITYC), S. Benolol, A. Tena, J. Jiménez, E. Oñate, CIMNE IT575, 2009
NICOP Project N00173-08-G017. Computational research to support the Development of the Swimming and Hovering Underwater Unmanned Vehi-cle (UUU) by NRL, CIMNE IT576, 2009
CONSOLIDER SEDUREC –Año 3, Propuesta de medida instantánea insitu de la corrosión de la armadura, CIMNE IT577, 2009
Comprobación del diseño de un cajón multicelular Tipo para el muelle del Prot Fose II-Puerto de Barcelona, CIM-NE IT578, 2009
Application of shape optimisation in aeronautics”, A. Rahim, CIMNE IT580, 2009
Cálculo numéricos de las cargas aero-�������������� ���������������� �de un avión de transporte comercial (737-TES-CA-2121), X. Andreu Vidal, CIMNE IT581, 2009
Hacia una implantación internacional de CIMNE basada en la excelencia, E. Oñate, CIMNE IT582, 2009
Numerical study of the thermal effects induced by a RFID antena in vials of blood plasma, R. Otín, CIMNE IT583, 2009
ERMES : Numerical tool for SAR com-putations, R. Otín, CIMNE IT584, 2009
Simpact-Explicit dynamic code for non linear structural analysis, R. Otín, CIMNE IT585, 2009
Hydrodynamics of underwater implo-���� ����� ������ � ����� � ����� ��-tod, K.Kamran, CIMNE IT586, 2009
Análisis y proyectos de estructuras, M. Tort, CIMNE IT587, 2009
CIMNE-TIC, CIMNE IT588, 2009
Research lines and RTD project in biomedical engineering, CIMNE IT589, 2009
Cylinder collapse by external pressu-re, F. Zárate, E. Oñate y F. Flores,CIMNE IT590, 2009
?�� �������������� ���������� ���-ción en presas de escollera, C. Tapia, E. Oñate y A. Larese, CIMNE IT591, 2009
Different benchmarks analysis in incre-mental sheet forming processes, O. Frui-tos, A. Maymó, CIMNE IT592, 2009
Cálculo de la estructura de un aero-generador con el programa explícito para compuestos FEMCOM, A. Ferriz,R. Méndez, O. Fruitos, S. Oller, CIMNE IT593 2009
Análisis mediante MEF de una estructu-ra D-Box para aplicaciones aeronáuti-cas, CIMNE IT594, 2009
Desarrollo de una herramienta de pro-cesamiento de imágenes médicas en MATLAB y su integración en medical GiD, E. Soudah, CIMNE IT595, 2009
55
Informes tècnicsInformes técnicosTechnical reports
LlibresLibrosBooks
����������MonografíasMonographs
Publicacions de recercaPublicaciones de InvestigaciónResearch reports
�������-!+;� #$��<��2�.�������""����.���;��)�2��,���������������;�"���9������� 2���=��1���;� �!*� ����,��0��;�&'-�2�.�����������������������*(!���9%�������6������
Desde 1987, CIMNE ha publicado 122 libros, 15 programas educativos, 2 re-vistas periódicas, 186 monografías, 349 publicaciones de investigación y 608 in-formes técnicos.
Since 1987, CIMNE has published 122 books, 15 educational software, 2 quaterly journals, 186 monographs, 349 research reports and 608 technical reports.
Badia S. , Codina R., Stabilized continuous and disconti-nuous Galerkin techniques for Darcy ���#�����������!�����?�� ���Mechanics and Engineering, Vol. 199, 1654-1667, 2010.
Badia S., Codina R., Gutiérrez-Santacreu J.V., Long-term stability estimates and existence of a global attractor in a ������ ����������}����������!�Navier-Stokes equations with nume-rical sub-grid scale modeling, SIAM ������ ��������� ?�� >����[� #�¡�1013-1037, 2010.
Baiges J., Codina R., The Fixed-Mesh ALE approach applied to Solid Mechanics and Fluid-Structure Interaction Problems, International ������ ���������� ���!�����;�-gineering, Vol. 81, 1529-1557, 2010.
Carbonell J.M., Oñate E. and Suárez B., Modeling of ground excavation with �!������� ������� ��������!�����-urnal of Engineering Mechanics, ASCE, Vol. 136 (4), 455-463, 2010
Cervera M., Chiumenti M. and Codina R., ��}������� �=�������� �����methods in nonlinear solid mecha-nics. Part I: Formulation, Computer Methods in Applied Mechanics and Engineering, Vol. 199, 2559-2570, 2010
Cervera M., Chiumenti M. and Codina R., Mixed Stabilized Finite Element Methods in Nonlinear Solid Mecha-nics. Part II: Strain Localization, Comp. Meths. in Appl. Mech. and Eng., Vol. 199, Num. 37{40, 2010.
Cervera M., Pelà L., Clemente R., Roca P., A crack-tracking technique for locali-zed damage in quasi-brittle materials, Engineering Fracture Mechanics, Vol. 77, Num. 13, 2010.
Chiumenti M. , Cervera M., Salmi A., Agelet de Saracibar C., Dialami N., Matsui K.,Finite element modeling of multi-pass welding and shaped metal deposition processes, Computer Methods in Applied Mechanics and Engineering 199 2343-2359, 2010
Chiumenti M., Cervera M., Salmi A., Agelet C., Dialami N., Matsui K., Finite Element Modeling of Multi-Pass Welding and Shaped Metal Deposition Processes, Comp. Meths. in Appl. Mech. and Eng., Vol. 199, Num. 37{40, 2010.
Codina R., Principe J., Ávila M., Finite element approximation of turbu-lent thermally coupled incompressible �������!�������� ����������� ����� ����J����������� ������ ���Numerical Methods for Heat & Fluid Flow, Vol. 20, 492-516, 2010.
Codina R., Principe J., Ávila M., Finite element approximation of turbu-lent thermally coupled incompressible �������!�������� ����������� ����� ����J����������� ������ ��Numerical Methods for Heat and Fluid Flow, Vol. 20 , 492-516, 2010.
Codina R. , Baiges J., Pérez-Sánchez D., Collados M., A numerical strategy to compute ������ ����������������� ������#Application to telescopes, Computers & Fluids, Vol. 39, 87-98, 2010.
Dadvand P., Rossi R. and Oñate E., An object oriented environment for ��%� ����������� �������������multi-disciplinary applications, Archives of Computational Methods in Enginee-ring, Vol. 17 (3), 253-297, 2010
De Mier M., Idelsohn S.R., Oñate E., Advances in the simulation of multi-�����������!�!�\����� �_�����Element Method. Application to bubble �>������§#J����������� ������ ���Numerical Methods in Fluids. Published �� ���^'J"��#�������#���¥�����#
���� ��� ��������� ��� ���� $��
PUBLICACIONES EN REVISTAS CIENTÍFICAS
PUBLICATIONS IN SCIENTIFIC JOURNALS
������������������������������������������������������/01����2�.��9�����2����������,��������� #$��������2��/����"((-9"(�(
Se listan a continuación los artí-���� ��� �Q �� �������� ���-blicados por investigadores de CIMNE en el periodo 2009-2010
We list next the papers in scientific journals published by CIMNE researchers in the period 2009-2010.
2010
57
Faleiro J., Oller S. and Barbat A.H. , Plastic-damage analysis of reinforced concrete frames. Engineering Computa-�����"J����������� ������ ��������-ter-Aided Engineering and Software Vol. 27 No.1, 2010. 57-83. Emerald Group Publishing Limited 0264-4401. DOI 10.1108/02644401011008522., 2010
Flores R., Ortega E. and Oñate E., A numerical investigation of wind tunnel model deformations caused by �!�������������������>����������� of Aircraft, Vol. 47, 708-714, 2010
Flores R., Ortega E., Onate E., Numerical Investigation of Wind-Tun-nel Model Deformations Caused by the Twin-Sting Support System, AIAA ������ ��?��������%� #�£�#£�¡�£���2010
Hartmann S., Weyler R., Oliver J., Cante J.C., Hernández J.A., A 3D Frictionless Contact Domain Method for Large Deformation Pro-blems, Computer Modeling in Enginee-ring & Sciences 55, 211–270, 2010
Idelsohn S. R. , Oñate E. and De Mier M., ]!������� ������� ��������!����� ������� %��� ������������?���Mechanica Solida Sinica, Vol 23, 56-63, December, 2010
Idelsohn S. R. and Oñate E., The challenge of mass conservation in �!��� ��������������������������!the fractional-step method: Problems ����� �������J����������� ������ for Numerical Methods in Biomedical Engineering, Vol. 26, 1313 - 1330, 2010
Idelsohn S.R., De Mier M., Nigro N., Oñate E., On the Analysis of Heterogeneous _ �������!��������!�[�������>using a Discontinuous Pressure Field, Computational Mechanics, Vol 46, No 1, 115-124, 2010.
Idelsohn S.R., Mier-Torrecilla M., Nigro N. and Oñate E., On the analysis of heterogeneous ��������!��������!�%�������>����������������������������� �������-tational Mechanics, Vol. 46 (1), 115-124, 2010
Idelsohn S.R., Oñate E., De Mier M., The Particle Finite Element Method applied to solve Multi-Fluid Flows, Acta Mechanica Solida Sinica, Vol 23, Issue December, 2010.
Löhner R. and Oñate E., ?�%��������������!��$������� ���space with arbitrary separated objects, Finite Elements in Analysis and Design, Vol. 46 (1-2), 140-151, 2010
Marti J., Ryzhakov P., Idelshon S., Oñate E. and Novozhilov V., A New Approach for Simulation of the Polymers in Fire Situations, Combus-tion and Fire Dynamics, Santander, Spain, October 20-23, 2010
Molina M., Oller S., Barbat A.H., Martínez X., Análisis numérico de estructuras de hormigón reforzadas con FRP por me-dio de la teoría de mezclas serie/para-lelo. Revista Internacional de Métodos Numéricos para el Cálculo y diseño en Ingeniería Vol 26, No.2, 135,175. ISSN: 0213-1315, 2010.
Nadukandi P., Oñate E. and García J., A high-resolution Petrov-Galerkin me-thod for the 1D convection-diffusion-reaction problem, Computer Methods in Applied Mechanics and Engineering, Vol. 199, 525-546, 2010
Oller S., Bellomo F. J., Armero F., Nallim L. G., A stress driven growth model for soft tissue considering biological avai-lability. IOP Conf. Series: Materials Science and Engineering 10 012121. doi:10.1088/1757-899X/10/1/012121., 2010
2010
Oñate E. and Zárate F., Extended roation-free plate and beam elements with shear deformation ��������J��#������ ���������� Methods in Engineering, Vol. 83 (2), 196-227, 2010
Oñate E., Idelsohn S. R., Felippa C. A., Consistent pressure Laplacian stabili-zation for incompressible continua via !��!��������������� �� ��§#J������-����� ������ ���������� ���!���in Engineering, DOI: 10.1002/nme 3021. September, 2010.
Oñate E., Rossi R., Idelsohn S.R. and Butler K.M., Melting and spread of polymers in ������!�!������� ������� ��������!���J��#������ ���������� Methods in Engineering, Vol. 81 (8), 1046-1072, 2010
Pinyol, N.M. and Alonso, E.E., Criteria for rapid sliding II. Thermo-hydro-mechanical and scale effects in Vaiont case. Engineering Geology, 114 (3-4), 211-227, 2010
Pinyol, N.M. and Alonso, E.E., Fast planar slides. A closed form thermo-hydro-mechanical solution?. J����������� ������ ���������� and Analytical Methods in Geome-chanics 34: 27-52. Published online 16 April 2009 in Wiley InterScience. DOI: 10.1002/nag.795, 2010
Principe J., Codina R., Henke F., The dissipative structure of variational multiscale methods for incompressible ����������������!�����?�� ���Mechanics and Engineering, Vol. 199, 791-801, 2010.
Principe J., Codina R., On the stabilization parameter in the subgrid scale approximation of scalar convection-diffusion-reaction equa-tions on distorted meshes.Computer Methods in Applied Mechanics and Engineering, Vol. 199, 1386-1402, 2010.
Principe, J., Codina, R., On the stabilization parameter in the subgrid scale approximation of scalar convection-diffusion-reaction equa-tions on distorted meshes, Computer Methods in Applied Mechanics and Engineering, Vol. 199 (21/22), 1386-1402, 2010.
Roca P., Cervera M., Gariup G. and Pelà L., Structural Analysis of Masonry His-torical Constructions. Classical and Advanced Approaches, Archives of Computational Methods in Engineering, Vol. 17, Num. 3, 2010.
Rossi R. and Oñate E., Analysis of some partitioned algori-�!�������������������������������Engineering Computations, Vol. 27 (1), 20-56, 2010
Ryzhakov P.B. , Rossi R., Idelsohn S., Oñate E., A monolithic Lagrangian approach for ����������������������������� ���#������ �������������� ���!������Vol 46, Issue 6, 883-899, 2010.
Ryzhakov P.B., Rossi R., Idelsohn S.R. and Oñate E., A monolithic Lagrangian approach for ����������������������������� ����Computational Mechanics, Vol. 46 (6), 883-899, 2010
2010
59
Santiago D., Lombera G., Urquiza S., Age-let de Saracibar C., Chiumenti M., Modelado termomecánico del proce-so de Friction Stir Welding utilizando la geometría real de la herramienta, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en la Ingeniería 26, 293-303, 2010
Spa C., Escolano J., Garriga A., Mateos T., Compensation of the Afterglow Phe-nomenon in 2-D Discrete-Time Simu-lations. IEEE Signal Processing Letters; Vol.17(8):758-761, 2010.
Spa C., Garriga A., Escolano J., Impedance Boundary Conditions for Pseudo-Spectral Time-Domain Methods in Room Acoustics. Applied Acoustics; Vol.71: 402-410, 2010.
Ubach de Fuentes, P.A. and Oñate E. ,��������������������� ������!� triangle accurately using geometrical data, Computer Methods in Applied Mechanics and Engineering, Vol. 199, 383-391, 2010
Vielma, J., Barbat A., Oller S., Seismic safety of low ductility struc-tures used in Spain. Bulletin of Ear-thquake Engineering. 8 (2010); 135-155. DOI 10.1007/s10518-009-9127-4. ISSN: 1570-761X, 2010.
Boroomand B., Najjar M. and Oñate E., ]!������� �=���������������!���Computational Mechanics, Vol. 44, 173-190, 2009
Chacón R., Guzmán F., Mirambell E, Real E. and Oñate E., Wireless sensor networks for strain monitoring during steel bridges laun-ching, Structural Health Monitoring, Vol. 8 (3), 195-205, 2009
Di Capua D., Oñate E. y Marí A., Modelo higro-termo-mecánico para el hormigón expuesto al fuego, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 25 (4), 359-393, 2009
Idelsohn S., Mier-Torrecilla M. and Oñate E., �� ��������������!�!�\����� �Finite Element Method, Computer Methods in Applied Mechanics and Engineering, Vol. 198 (33-36), 2750-2767, 2009
Idelsohn S.R., del Pin F., Rossi R. and Oñate E., Fluid-structure interaction problems ���!�����������������������J��#����-nal for Numerical Methods in Enginee-ring, Vol. 80, (10), 1261-1294, 2009
Kleiber M. and Oñate E., Olgierd Cecil Zienkiewicz Obituary, Archives of Computational Methods in Engineering, Vol. 16, 465, 2009
Labra C. and Oñate E., High-density sphere packing for discre-te element method simulations, Com-munications in Numerical Methods in Engineering, Vol. 25 (7), 837-849, 2009
Löhner R. and E. Oñate, ?���%��������������!��$������ ���space with arbitrary separated objects, J��#������ ���������� ���!�����Engineering, Vol. 78 (13), 1618-1630, 2009
Lomboy G.R., Suthasupradit S., Kim K.D. and Oñate E., Nonlinear formulations of a four-node quasi-conforming shell element, Archives of Computational Methods in ;�����������[� #�¢«�¬��¡¥��¤������2009
Ortega E., Oñate E. and Idelsohn S., ?�������������!�����������%���!�������������� ���������� ������ �� �������J����������� ������ ���Numerical Methods in Fluids, Vol 60 (9), 937-971, 2009
Rossi R., Ryzhakov P.B. and Oñate E., A monolithic FE formulation for the ��� >����������������������J����-������� ������ ��@����@����������[� #24 (4), 205-210, 2009
Valdés J. G. and Oñate E., Orthotropic rotation-free basic thin shell triangle, Computational Mecha-nics, Vol. 44 (3), 363-375, 2009
Valdés J.G., Miquel J. and E. Oñate, �� ����������� �������� >�����orthotropic and prestressed mem-brane structures, Finite Element in Analysis and Design, Vol. 45 (6-7), 395-405, 2009
Valdés J.G., Miquel J. and Oñate E., �� ����������� �������� >�����orthtropic and prestressed membrane structures, Finite Elements in Analysis and Design, Vol. 45 (6-7), 395-405, 2009
2010 2009
Societats científiques
Sociedades científicas
Scientific societies
SOCIEDAD ESPAÑOLA DE MÉTODOS NUMÉRICOS EN INGENIERIA
www.semni.org
INTERNATIONAL ASSOCIATION FOR COMPUTATIONAL MECHANICS
www.iacm.info
EUROPEAN COMMUNITY ON COMPUTATIONAL METHODS IN APPLIED SCIENCES
www.eccomas.org
EUROPEAN RESEARCH COMMUNITY ON FLOW, TURBULENCE AND COMBUSTION
www.ercoftac.org
ORGANIZACIÓN DE LAS NACINN ONES UNIDAS
PARA LA EDUCACIÓN, LA CIENCIA Y LA CULTURA
www.unesco.org
����� ������ ���������������� ���������� ��������������������������� �����!��� ���� �
������ �5��8� �-!!� ��� ��� 2�������;�������� #$�;�����������������������9���� �2��8���� ���$6���������6���������,��8�����H�$�#I������.4�������%�����������������$�#�����%�������;���,����:��� �� ���������� ���2��8�� ��������������� ���������������.������6��9�������6����;��������.7���2����������2��8�� �� ��� #������������� �������9����� %��� ��2����������� $��<������H#� $I��
�$�#����A������������������������9�������� ���.������ ���������� ��� �������2�?���;����������5���2���� ����9���8� ��� ��2����������� $��<���� ����22����� ��������� H �$��I;� �������2�� 2���� �5����������� ����$79�<��������7��1���� ��� �5#�,7������;� ��E���B�;� ���C������ ������� ������������%��� ��2���������� $��<������ �� �������������� ��,������� ��� $��[����� ��2�����������3����������$�#�7���� #$��
3��������������%���������������$�#����� �5��,����:����� ��� 4�������� �6���91�������������.����6���������6��������5��,��8����;��������.7��5��,����:������5������,�7�����������
ACTUACIÓN DE CIMNE COMO SECRETARÍA DE LA SOCIEDAD ESPAÑOLA DE MÉTODOS NUMÉRICOS EN INGENIERÍA
En 1988 se promovió desde CIMNE la creación de la Sociedad Española de Mé-todos Numéricos en Ingeniería (SEMNI). Los objetivos fundamentales de SEMNI son fomentar, organizar y coordinar en España las actividades relacionadas con los métodos numéricos, así como repre-sentar a España en la International As-sociation for Computational Mechanics (IACM).
SEMNI está vinculada a diversas so-ciedades similares existentes en otros países, como la European Community on Com putational Methods in Applied Sciences (ECCOMAS), le Groupe pour l’Avancement des Méthodes Numéri-�� �����#�%�������������!���������States Association for Computational Mechanics y la Asociación Argentina de Mecá nica Compu ta cio nal. La sede de SEMNI se encuentra en el CIMNE.
En la actualidad, SEMNI cuenta con más de cuatrocientos socios en toda España y también de varios países del extranjero.
Las actividades fundamentales de SEM-NI son la organización de jornadas técni-cas anuales y los congresos sobre méto-dos numéricos en Ingeniería.
THE ROLE OF CIMNE AS THE SECRE-TARIAT OF THE SPANISH SOCIETY FOR NUMERICAL METHODS IN ENGINEERING
In 1988, CIMNE contributed to the creation of the Spanish Society for Numerical Methods in Engineering (SEMNI). The basic aims of SEMNI are the organization and coordination of all activities related to numerical methods in engineering in Spain and being the Spanish representative in the International Association for Computational Mechanics (IACM).
SEMNI is linked to similar associations in other countries, for example the European Community on Computational Methods in Applied Sciences (ECCOMAS), the Groupe pour l’Avancement des Méthodes Numériques de l'Ingénieur in France, the United States Association for Compu-tational Mechanics in the United States, and the Asociación Argentina de Mécanica Computacional in Argentina. The headquarters of SEMNI are based in CIMNE.
Currently, SEMNI has over 400 members in Spain and in other countries. Some of the main activities of SEMNI include the organization of technical workshops and the Spanish Conference on Numerical Methods in Engineering.
SOCIEDAD ESPAÑOLA DE MÉTODOS NUMÉRICOS EN INGENIERIA
www.semni.org
������,�����������$�#��5<������9���:��������������������,M����\����2������������������:�����3��� �������������� ��A����H�--(I;������,������� ����8��H�--&I;�����������������,�����H�--*I;����1���������������H�---I;�������1�6���$�9�����H"(("I;�������6���3��.���H"(('I;�������6�����������H"(()I;��������6��� ��9���H"((+I���������6���P���������H"((-I��� 2�=����� ���,�7�� ��,����:��� 2����$�#��������.���A��� ���.��;� ��9��,��;������'�����+����4��8�����"(���
�$�#� ��� ��,����:��� ��� #�� Q����� ��,����� ��� ��2���������� $�9�<�����;�1���������������:�����P�����������;� ���� � "!� ��� 4��8� ��� "� ��� 4��������� �--!;� �� �5���2���� ��,����� �9��2���� ��,����� ��� ��2����������$��<��������22������������������9,�������,;� ����.���� �� P��������� ����5�������'���������.�������"(((�
�$�#���,����:�����.7����������4��9�������6���1��������6���������6����������,��8������
Los congresos de SEMNI se han celebra-do en las ciudades siguientes; el primero se celebró en Las Palmas de Gran Ca-naria (1990), el segundo en La Coruña (1993), el tercero en Zaragoza (1996), el cuarto en Sevilla (1999), el quinto el Ma-drid (2002), el sexto en Lisboa(2004), el séptimo en Granada (2005), el octavo en Portugal (2007) y el noveno en Barcelona (2009).
El próximo congreso organizado por SEM-NI se celebrara en Coimbra, Portugal, del 14 al 17 de junio del 2011.
SEMNI fue la organizadora del IV World Congress on Computational Mechanics celebrado en Buenos Aires en 1998 y del European Congress on Computational Methods in Applied Science and Engi-neering celebrado en Barcelona del 11-14 de septiembre del 2000.
SEMNI organiza también cursos y jorna-das técnicas en métodos numéricos en ingeniería.
SEMNI congresses are held in the next cities; the first one was in the Canary Islands (1990), the second in La Coruña (1993), the third in Zaragoza (1996), the fourth in Sevilla (1999), the fifth in Madrid (2002), the sixth in Lisbon (2004), the seventh in Granada (2005), the eighth Porto (2007) and the ninth in Barcelona (2009).The next congress will be oganized in Coimbra, Portugal, between June 14-17, 2011.
SEMNI organized the 4th World Congress on Computational Mechanics in Buenos Aires in 1998 and the ECCOMAS congress in Barcelona between September 11-14, 2000.
SEMNI also organizes workshops and courses on numerical methods in engineering.
������ ������� ��������� ����������������������������%��LA COMISIÓN EJECUTIVA DE SEMNI LA COMPONEN LAS SIGUIENTES PERSONAS
THE EXECUTIVE COUNCIL OF SEMNI IS AS FOLLOWS:
President / Presidente / PresidentXavier Oliver Olivella (Universitat Politècnica de Catalunya)
Vicepresident / Vice-Presidente / Vice-President������Q���� ���������=(Universidad Politécnica de Madrid)
Secretaria / Secretaria / SecretaryIrene Arias Vicente (Universitat Politècnica de Catalunya)
Ex-president / Ex-presidente / Ex-presidentEugenio Oñate Ibáñez de Navarra (Univ. Politècnica de Catalunya)Manuel Casteleiro Maldonado (Universidad de A Coruña)
Vocals / Vocales / Council MembersPilar Ariza Moreno (Universidad de Sevilla) ����������� ����J =����(Universidad del Pais Vasco) Miguel Cervera Ruiz (Universitat Politècnica de Catalunya) Ignasi Colominas Ezponda (Universidad de A Coruña) Elías Cueto Prendes (Universidad de Zaragoza)Antonio Huerta Cerezuela (Universitat Politècnica de Catalunya) Fermín Navarrina Martínez (Universidad de A Coruña) ��������\���=?�������(Universidad Politécnica de Valencia)Antonio Rodríguez Ferran (Universitat Politècnica de Catalunya) Riccardo Rossi (CIMNE)
63
3�� #������������� ������������ %��� ��2����������� $��<������ H#� $I��������������5��8��-!����.��5�.4���������2����������������B������$��A��������2����������
��� ���� 2��2������ ��� �5#� $;� ���$��A������� ����2���������� ��� ��0�����������������������2������ �� �5�2����������� �6������ ����6������� �� ��� ���2���9���� ��,����� �� ��� ��������� ��� 2��.����������5��,��8�������������6���������2�����������.� �5�.4������ ��� %��� ������������ ���2��0��.�������������������������������
3��$��A������������������2����������H �$I���������A��������]��������2�9��������� H EI����������������������������5����������������#� $����������������5�����6�� 2��� �� ��� #� $� ���@� ��� ���9�����A����;� �5���������,�������;� ���$��A����������������/,���;������������������������������������2������������%/��������2���/������
^3������������_����#� $����2����������%��������R�������������;��������������%�������;�������������������������������� ���� ��%������� �����2������ ��2��9����������
��������--';���������������� ���������������#� $����A���������� #$��
La International Association for Compu-tational Mechanics (IACM) fue creada en 1981 con el objetivo de promocionar avances en mécanica computacional.
Para los propósitos de la IACM, la mé-������ ��&���������� � ���� ��&��el desarrollo y la aplicación de métodos numéricos y la computación digital a la solución de problemas en Ingeniería y ciencias aplicadas con el objetivo de comprender y aprovechar los recursos de la naturaleza.
La mecánica de sólidos computacional Z"�$\��������'&��������� ���&����-cional (CFD) constituyen el núcleo de la actividad de la IACM. Entre otros temas de interés para IACM se incluyen la ter-modinámica, el electromagnetismo, la mecánica de cuerpos rígidos, los siste-mas de control y otros aspectos de la físi-ca de partículas.
“La razón de ser” de la IACM es promover un fórum común de discusión, educación y formación y transmisión de Investiga-ción entre las diferentes disciplinas re-presentadas.
Desde 1994, el Secretariado Permanen-te de la IACM está ubicado en CIMNE.
The International Association of Compu tational Mechanics (IACM) was founded in 1981 and promotes advancements in computational mechanics.
For the purposes of the IACM, Computational Mechanics is defined as the development and application of numerical methods and digital computers to solve problems in Engineering and Applied Science with the objectives of understanding and harnessing the resources of nature.
While Computational Solid Mechanics (CSM) and Computational Fluid Dynamics (CFD) are at the core of IACM activity, subjects such as thermodynamics, electromagnetics, rigid body mechanics, control systems and some aspects of particle physics fall naturally within the scope this definition. Indeed providing of a common forum for discussion, education and research information transfer between the diverse disciplines represented is the main “raison d’Ítre” of IACM.
Since 1994 the IACM Secretariat has been located at CIMNE.
INTERNATIONAL ASSOCIATION FOR COMPUTATIONAL MECHANICS
www.iacm.info
#� $���,����:�������1��������8����� ��,�7��$����������$��A����� ��2�����������3������9�����������������5�1��������,�7���5<���%������������H�-!*I;������,����H�--(I;�D�X8��H�--'I;���9,�������H�--!I;�������H"(("I;� �X���H"(('I;� ���%������H"((*I;���������H"((!I��������8�H"(�(I�
��2��2������,�������%��A������� ����;�����!�����&����4���������"(�"�
#� $����������.������/� ���������� ������� ��2������ �5��,����:�����������,���������2�������:���;���%����������2�����������������%������������5A�.���������$��A��������2����������
IACM organiza cada cuatro años el Congreso Mundial de Mecánica Computacional. Las an-teriores ediciones de este congreso han tenido lugar en Austin (1986), Stuttgart (1990), Tokyo (1994), Argentina (1998), Vienna (2002), Pe-kin (2004), California (2006), Venecia (2008) y Sidney (2010).
El próximo congreso tendrá lugar en Sao Paulo, del 8 al 13 de julio 2012.
IACM edita un boletín semestral y apoya la orga-nización de congresos especializados, diversos simposios y cursos de formación en el ámbito de la Mecánica computacional.
IACM organises the World Congress on Computational Mechanics (WCCM) every four years. Former editions of this congress were held in Austin (1988), Stuttgart (1990), Tokyo (1994), Buenos Aires (1998), Vienna (2002), Beijing (2004), California (2006), Venecia (2008) and Sidney (2010).
The next congress will be held in Sao Paulo, on 8-13 July 2012.
IACM publishes a biannual bulletin and supports the organization of special interest conferences, IACM Simposia and courses in various fields of computational mechanics.
3�� ��������������������#� $����A�%�������2�������2����������,M�����O�El Comité Ejecutivo de la IACM lo forman las siguientes personas / The Executive Council of IACM is composed by
President:Q#~�����������
Past Presidents: E. Oñate, Spain]#�#'����|#@#?#]#�#�#`��!���|#@#?#A.Samuelson†, SwedenO.C. Zienkiewicz†, U.K.
Vice President for the Americas: W.-K. Liu, U.S.A.
Vice President for Asia-Australia:M. Yuan, China
Vice President for Europe-Middle East-Africa:P. Wriggers, Germany
Secretary GeneralA. Huerta, Spain
Members:T. Belytschko, U.S.A.�#@#�!���|@?C. Farhat, U.S.A.�#_��!�|#@#?#G. Hulbert, U.S.A.S. Idelsohn, ArgentinaP. Ladevèze, FranceG.R.Liu, SingaporeH. Mang, AustriaR. Ohayon, FranceR. Owen, U.K.M. Papadrakakis, GreeceE. Ramm, Germany�#@�!������J�� >T. Tezduyar, U.S.A.]#~���������
�$��� ��� ��� ������ �5��8� �--&� ��.��5�.4���������2��������������%��B������4������������������������� ����2���;� ������������� �������� �����R�������������������6���������6�����������9������ 2��� ���������� ��� ��,��8����� �� ��6�������2���������
����.4�����������5 �$������@
9�#�����������5��%�������������/0������6������
9���������2����������6���������6����������92����������;���������������.��������������
9� ������������5A�.������������������������:�9����������1���������2��
9���2�������������� �5A�.�������2������ �������9���������;� ���� ���������������� �������� �� ���� ���R�9���������������������.������6���������6����������,��8���������6�������2��������
9���2����������������2������������������������#������������� ������������ %��� ��2����������$��<������H#� $I�
#$��7�����������������5 �$���
�$��� ���.7� ��,����:�� ���%��6����������2���� ��.��� �������:����;� �6������ ��9�6�����������������2������������������,��8���������6�������2��������
ECCOMAS fue creada en 1989 y agrupa 21 asociaciones de 15 países europeos, relacionadas con los métodos numéri-cos y sus aplicaciones en ciencia y tecnología.
Los objetivos de ECCOMAS son:
J�#�����&������<��&�����������������������
- Desarrollo de métodos numéricos y computacionales, si-mulaciones y bases de datos.
- Promoción en el ámbito mundial de las realizaciones en esos campos.
- Representación en el ámbito europeo de las universidades, de las instituciones de Investigación y las industrias relacio-nadas con los métodos numéricos en Ingeniería y ciencias aplicadas.
- Representar en Europa los intereses de la International As-sociation for Computational Mechanics (IACM).
CIMNE es el Secretariado de ECCOMAS.
ACME
AIMETAAPMTAC
CSMA
FMS
GRACM
IACMM
ISSEC
NMC
GACM
GAMM
SWICCOMAS
PACM
SIMAI
SSCM
TNCTAM
GAMNI/SMAI
SEMA
SEMNI
ONIV
NOACM
ERCOFTAC
BNCM
CEACM
ECCOMAS was founded in 1993 to promote joint efforts of European universities, research institutes, and industries that are active in numerical methods and computer simulation in engineering and applied sciences.
Specific objectives of ECCOMAS include:
- Exchanging scientific and technical information.
- Developing numerical and computer methods, simulations and data bases.
- Promoting worldwide the European achievements in these fields.
- Representing at the European level the universities, research institutes and in dustries involved in numerical methods in Engineering and Applied Sciences.
- To represent in Europe the interests of the International Association for Com pu tational Mechanics (IACM).
EUROPEAN COMMUNITY ON COMPUTATIONAL METHODS IN APPLIED SCIENCES
www.eccomas.org
ECCOMAS también organiza conferencias europeas sobre modelización, métodos numéricos y Simulación por orde-nador en Ingeniería y ciencias aplicadas.
Los congresos anteriores de ECCOMAS se llevaron a cabo en Bruselas en 1992, París 1996, Barcelona 2000 y Jyvas-kyla, Finlandia en julio de 2004. El congreso 2004 de EC-COMAS atrajo a 1100 participantes. La siguiente edición del congreso de ECCOMAS se celebrará del 30 de junio al 5 de julio de 2008 en la isla de Lido, Venecia, Italia.
Los congresos de ECCOMAS incluyen conferencias invi-tadas, sesiones tecnológicas especiales invitadas (STS), contribuciones de la academia e industria y Minisimpo-siums. Las actas de los congresos de ECCOMAS se difun-den extensamente en Europa.
ECCOMAS también organiza importantes conferencias de-����� ��� �������� �������� ��_��##����<������������sobre Computational Mechanics: So lids, Structures and Coupled Problems (ECCM 2001) tuvo lugar en Kraków (Polonia) del 26 al 29 de julio de 2001. La reunión fue organizada bajo los auspicios de ECCOMAS y de IACM y contó con 500 participantes. La III Conferencia Europea de Me cá nica Computacional de Sólidos y Estructuras (CSSM 2006) se celebró en el Laboratório Nacional de Engenharía Civil (LNEC) en Lisboa, Portugal, del 4 al 8 de junio de 2006.
El tercer congreso de ECCOMAS CFD tuvo lugar en Swan- ��Z|�������\����H�������� ��&�����K�����H������������ �� ������� ��������&�������������Las conferencias anteriores de ECCOMAS CFD se hicieron en Stuttgart (1994) y Atenas (1998). El IV ECCOMAS CFD se celebró en Egmond Zee aan, Países Bajos, del 5 al 8 de septiembre de 2006.
The secretariat of ECCOMAS is based in CIMNE.
The previous ECCOMAS Congresses were held in Brussels in 1992, Paris 1996, Barcelona 2000 and Jyvaskyla, Finland on July 2004. The ECCOMAS 2004 Congress attracted over 1100 participants. The next edition of the ECCOMAS Congress will take place on June 30 - July 5, 2008 in Lido Island, Venezia, Italy.
The ECCOMAS Congress includes invited lectures, Invited Special Technological Sessions (STS), contributed papers from Academy and Industry and Minisymposia.
ECCOMAS also organises large conferences devoted to structures and fluids. The second European Conference on Com pu tational Mechanics: Solids, Struc tures and Coupled Problems (ECCM 2001) was held in Krakow (Poland) from 26 - 29 July 2001. The meeting was organised under the auspices of ECCOMAS and IACM and attracted over 500 participants. The III European Conference on Computational Solid and Structural Mechanics (CSSM 2006) will take place in the Laboratório Nacional de Engenharía Civil (LNEC) in Lisbon, Portugal, on June 4 - 8, 2006.
The third ECCOMAS CFD Congress took place in Swansea (UK) on 4 - 7 September 2001. Some 450 participants attended this scien tific event. Previous ECCOMAS CFD conferences were held in Stuttgart (1994) and Athens (1998). The IV ECCOMAS CFD will take place in Egmond aan Zee, The Netherlands, on September 5-8, 2006.
These series of global meetings are complemented with more focused thematic conferences on state of the art topics in computational science and engineering organised with the support of ECCOMAS. More recently several ECCOMAS
������,������������� �$���������������%��6����������������;����������������=,�1������2������������������H�D�I;�������.�����������G����6���������R��������$��������2������3�����������������,������������� �$��������%����������9������������2��
�$������.7���,����:����2�����������%��6����������������������������������������]������3����,���� ��9%��6��������2�����.���$��A����� ��2���������@�������;��������������� ��.���������.�����H $�"((�I�������%�����U��X�����H ������I�����"*����"-����"((���
������,����������������������� �$������������%�����P������F��������--";��� ��/������--*;���P������������"(((�����S8���X8��;�E���A��������4���������"(('�������,�7������"(('�����G �$����������������((�2������2������
3G���������,M�����������,�7�������� �$����������.���A�����&(����4��8����)����4���������"((!����G��������3���;����6���;�#�A�����
3�� �$������.7���,����:����2�����������%��6������������������ ���������������� ������]������3����,���� ��%��6��������2�����.���$��A����� ��2���������@�������;�������������� ��.���������2�����H $�"((�I�������%�����U��X�����H ������I�����"*����"-����4���������"((��
67
3������������������,����:����������������2����������� �$�����������#� $���������������.�)((�2������2������3��###� ��%��6��������2������$��A����� ��2�����������������������G������������H ��$�"((*I�����������.�������3�.����������������������,��<��/�� �����H3� I���3��.��;� ����,��;�����'����!����4��8����"((*�
������������,�7������G �$��� E�������%������J������H��,���C���I�����'����+���������.������"((���C���')(�2������2���������������������1�����������������������/0���3������%��6������ ���������� ��� �G �$��� E���� ������ %��� �������,���� H�--'I� �� ���������H�--!I����#�� �$��� E�������%�����,�����V������;� �?����P�����;������)����!���������.������"((*�
�1������� �6����� ��� ��������� ��� ���2��������� ��.� ���%��6������ ���A��1���� ��%������� �������� ����B���� ��� ��6������ ���2����������� �� ��� ��,��8����;� ��,����:����� ��.� �G�4���� ����G �$����������������G<�������.�������������������6������G �$������A���������9�/01��������������� E;����������������;� �G���������,�������;����1�/����;������6��������9���A����� �� ���6����� �� �O �$�� �3G�.4������2�����2��� ����� �����6����� �G ��$���7��2���������G��,����:��������2����������%��6���������A��1������2��/01����������������������2�������/0������������,����
Estas series de reuniones globales se complementan con conferencias temáticas enfocadas en asuntos avanzados en ciencia computacional organizadas por ECCOMAS. Recientemente se han constituido varios comités de EC-"+$`����'�� �������� ���� ���&��"�?!� �������� !�electromagnetismo, química, métodos matemáticos y nu-méricos y CAD/CAM. El objetivo principal de los comités de ECCOMAS es promover la organización de conferen-�� ��&'��� ������ � ������ ���������� �����&-�� �������� ���������%�� �
Committees in scientific areas such as CFD, Structures, Electromagnetics, Chemistry, Mathe-matical and Nume rical Methods and CAD/CAM have been set up. The main objective of the ECCOMAS Committees is to promote the organisation of specific small thematic conferences and workshops in scientific and technological fields.
3�� ������������������5 �$������A�%�������2�������2����������,M�����O�El Comité Ejecutivo de ECCOMAS está formado por las siguientes personas / The Managing Board of ECCOMAS is composed of the following persons:
PresidentM. PapadrakakisVice PresidentsE. RammP. NeittaanmäkiSecretaryP. Díez TreasurerM. BernadouCo-opted Members to the MBO. AllixH. MangE. Oñate���$���\�����}Erwin Stein
N. Bicanic, ACME (UK)F. Auricchio, AIMETA (Italy)C. Mota, APMTAC (Portugal)D. Vandepitte, BNCM (Belgium)�#;���!������������;?��«������ ;�����¬P. Ladeveze, CSMA (France)C. Hirsch, ERCOFTAC\#�����������_�@«�� ���¬E. Ramm, GACM (Germany)P. Steinmann, GAMM (Germany)M. Bernadou, GAMNI/SMAI (France)M. Papadrakakis, GRACM (Greece)
M. Bercovier, IACMM (Israel)M. Gilchrist, ISSEC (Ireland)D. Van Campen, NMC (Nederlands)T. Kvamsdal, NOACM (Nordic)A. Maslov, ONIV (Russia)T. Burczynski, PACM (Poland)C. Parés, SEMA (Spain)P. Díez, SEMNI (Spain)M. Morandi-Cecchi, SIMAI (Italy)M. Kojic, SSCM (Serbia)�#_#�� ������@�J��'�?@I. Tuncer, TNCTAM (Turkey)
Managing Board Members
EUROPEAN RESEARCH COMMUNITY ON FLOW, TURBULENCE AND COMBUSTION
www.ercoftac.org
3��������� �ED� �������A�����-!+;����2�����2����7�����*(��������������9������ �� ��2�����;� 2����,���� 2��� ��9���������2����������2�����5�����A��������.��5�.4�������5�,��2���������������������5#������,���������2����1������.������%�9��������������������������������6�������� 2��.������ ���$��A����� ��� ]����� ���5��,��8�������������-!-;� #$��7����� ������ ��������2��8��
#$�� <�� ���������� ��� 2��4����� 09���B��� 2��� ��� C� 2��� �� �5��,����:�������� ��������� ������� ��� ��� ������5� �ED� ;� ��.��� �2���������� ������6���������6��������2��.���������]��;����.��6����������.������
������,�������������:��������������,M����\���� "(((� ��� ��� ������:��� �� P��������� ����###� ���2���� D��.������;� ��� "((*� ��P������������^���2�9�������Q��X�<�2���� $��<��������� $������,;� ��2�9������� ���� �2������������� ��� $����92<8���� �����2���� ���� ��������������,�������,� ��.����_;� ��� "((!� �� ��9������ ��� ^&���Q��X�<�2�����������<� ���D��.������_���"(�(���D����,�������^)�<�Q��X�<�2�����������<����D��.������_�
La red ERCOFTAC se creó el 1987, compues-ta por más de 60 centros de búsqueda y empresas, promovida por varias empresas europeas de aeronáutica con el objetivo de agrupar todos los centros de Investigación europeos que trabajan fundamentalmente en la simulación numérica de problemas de $�'���������� �������%������? ��1989, CIMNE es el Centro Piloto en España.
"#$*��}�����������������������������-�����������������������%��>�������Q��� �cursos en el marco de ERCOFTAC, sobre aplicaciones de los métodos numéricos en �����&� � �� ����!� ���������� �� ��&�� -tión.
Los congresos realizados son los siguien-tes; el 2000 se realizó en Barcelona el VIII European Turbulence, el 2006 en Barce-lona el “Europe-Russia Workshop donde Mathematical Modeling, Computation and Experimentation in Multiphysis AeroSpace and Environmental Engineering Problems”, el 2008 en Sevilla el “3rd Workshop don-de Research in Turbulence” y 2010 en Ta-rragona el “5th Workshop on Research in Turbulence”.
The ERCOFTAC network was founded in 1987, composed of more than 60 research centers and companies, promoted by several European aerospace companies with the objective of gathering all European research centers working primarily in the numerical simulation of fluid mechanics problems engineering. Since 1989, CIMNE pilot center in Spain.
CIMNE has coordinated a project financed by the European Community which included the organization of 10 ERCOFTAC courses related to the application of numerical methods in flow, turbulence and combustion problems.
The congresses are; on 2000 was held in Barcelona the Eighth European Turbulence, 2006 in Barcelona, “Europe-Russia Workshop where Mathematical Modeling, Computation and Experimentation in Multiphysis AeroSpace Engineering and Environmental Problems”, in 2008 in Seville “3rd Workshop where Research in Turbulence” and 2010 in Tarragona the “5th Workshop on Research in Turbulence”.
69
ORGANIZACIÓN DE LAS NACIONES UNIDAS PARA LA EDUCACIÓN, LA CIENCIA Y LA CULTURA
www.unesco.org
3�� �������� ��� #$�� ��� 7����� ���2�9������2��� ���C�� ����.����0����������� 2�������� ��� ���2������� ����������9���� ��������������2��������� �5A�.�������5�2�������� ����� �6������ ���6����� �����6��������������,���
E��������������2������������� #$�������C�� �������������������;�����-!-;������� A������C�� �����$6���������6���������,��8����������C����������� ����6��������� ������8��HC I;���.������2������� #9�#D�H��������������� ������8�I�
�� ��%����� ��V���X��J��:�<��������2������ %����� ����������2���� ��� �����,� ������2����.��������� A������C���������������������������������-!-;�������������������������������"�������������"((-����92�7���5��������,��������������"((!�7����������2�����������S��1���� 7�����;�����9��,�����2��������������5A�.���������6���������6������2����������5��,��8����������A�9����;�������������������� A����������������2��/���� "((!9"((-� �5<�� �����?�� ��� �������.��� ���������� ��� ���� ����������� ����KK�� ��� �5A�.��� ������2�����;� ��� 2��9������������.����������������%�������;������������� ��.� �����/0��� ��� 2�����,�� �������������������������2��4����������������������������2���������������������
��� R������ Q��X�<�2�� ��� 1��� <������F��.����� <��� ������ ��� ^#������������� ��%������� ��� ��������.����8� $����9�����������$�������,�`� # �$$_�����"((*�������"((-�
La creación de CIMNE fue auspiciada por ��� �*��"+� ���� �� ��� �� ���&�Q�� ��� ��-operación internacional y el desarrollo en el ámbito de la aplicación de los métodos numéricos en ciencia y tecnología.
Fruto de la cooperación entre CIMNE y la �*��"+�<�����������!�����B�!������"'-����� �*��"+� �� $����� � *�&���� � ��#�%����� �� ��� ��Q� ���� U��������� ��"���������Z�U"\!���������������"#|#V�Z@-neralitat de Catalunya).
El Prof. O. C. Zienkiewicz había ocupado de forma ininterrumpida el cargo de res-��� ���� �� ��� "'����� �� ��� � �� ��creación el 1989, desgraciadamente murió el día 2 de enero de 2009 después de una larga enfermedad. El 2008 se incorporó el Dr. Jacques Périaux, reconocido especia-lista en el ámbito de los métodos numéri-cos aplicados a la ingeniería aeronáutica, su tarea a la Cátedra durante el periodo 2008-2009 se ha traducido en un notable incremento de las actividades de I+D+y en el ámbito aeroespacial, la promoción de nu-merosos cursos de formación, intercambios ����������� ����� �%�����������&��-do y varios proyectos de búsqueda y desa-rrollo internacionales.
Los últimos Workshops en que han colabo-rado han sido lo “International Conference on Sustainability Measurement and Mode-lling – ICSMM” del 2006 y del 2009.
CIMNE creation was sponsored by UNESCO to promote international cooperation and development in the field of application of numerical methods in science and technology.
Result of cooperation between UNESCO and CIMNE was the creation in 1989 of the UNESCO Chair on Numerical Methods in Engineering from the Polytechnic University of Catalunya (UPC), supported by CIRIT (Generalitat de Catalunya).
Prof. O. C. Zienkiewicz had continuously occupied the position of Chief of the UNESCO Chair since its inception in 1989, sadly died on January 2nd, 2009 after a long illness. In 2008 joined Dr. Jacques Periaux, recognized expert in the field of numerical methods applied to aerospace engineering, the task of the Chair during the 2008-2009 period has resulted in a significant increase in the RTD and in the aerospace sector, the promotion of numerous training courses, exchanges with leading scientists worldwide and several research and development projects internationally.
Last Workshops that have worked in are “International Conference on Sustainability Measurement and Modelling – ICSMM” in 2006 and 2009.
\���#�#\�����}Prof. O. C. Zienkiewicz
Premis rebuts per investigadors vinculats a CIMNE Premios recibidos por investigadores vinculados a CIMNE
Awards received by scientist linked to CIMNE
������������E����������#������,�9���� ��D������,��� ���� ���C����������� ����6��������� ������8�;�"(('���2���������������,������� �������,�9�������� #$�����Z������S������/��2������.����@
^��������2������ �5��� ���� ������5��������� 0����� 2��� �5������� ��� ���<�������A����� ��� ���������� �2����9���������������8����������������� �2����6����_
����� ���������P���������"(("����#������,�����D������,����������� %�.�������"((&� ��� �������9,������2����� ���������P������������������,������G#������,�����D�����=,���;��� �G�1��2� �5#������,����� ���� #$��%������ 2��� �,���� �Z���;� ��������.�;� ���1����������;�$�1���� ��������� �� S��,�� ����� 2��� ���������2�9������������������#;�̂ ���������%/����,�A0�������������������%A����������:�9����1���2������ ����������:�����,��9�6�������������������:��������������������������������������6��1���_�
���� ����������� ����
Premio Duran i Farrell de Investiga-������V�����%��� ��� �����Q� ����Politécnica de Cataluña, 2004
El premio se otorgó a los investigadores de CIMNE E. Oñate y J. García por el tra-bajo: “Desarrollo del código de elemen-�� ����� �V?�*�������� ����������}-drodinámica de barcos. Aplicaciones al Diseño de veleros de la Copa América”
Premio Ciutat de Barcelona 2002 en Investigación Tecnológica
El 11 de febrero de 2003 fue concedi-do el premio Ciutat de Barcelona en Investi ga ción Tecnológica, al equipo de Investi gación del CIMNE compuesto por Eugenio Oñate, Ramon Ribó, Enrique Escolano, Miquel Pasenau y Jorge Suit, por el desarrollo del sistema GID, “una ���<��� %�'���� ���Q������ �� �� <'���utilización que permite la modelización geométrica y la visualización de los re-sultados de simulaciones numéricas”.
PREMIOS A CIMNE
Award Duran i Farrell for Research and Technology Univesitat Politècnica de Catalunya, 2004
The Award was delivered to CIMNE scientists E. Oñate and J. García for their work entitled: “Development of a new finite element code for the hydrodynamic study of vessels. Aplications to the design of sailing ships for the America Cup race”.
Ciutat de Barcelona 2002 Award, in Technological Research
On February 11, 2003, the Ciudat de Barcelona award in Technological Re search was given to the CIMNE research team; Eugenio Oñate, Ramon Ribó, Enrique Escolano, Miquel de Riera and Jorge Suit, for the development of the GID system, “an innovative and user-friendly graphic interface that permits the geometric modeling and visualization of the results of numerical simulations.”
AWARDS TO CIMNE
73
���������/�����$������������$6���� ����/0����D������,����---3����������������� ������8���������9,������&���������.�������---��� #$9�� ��� ���������/�� ���$��������� ���$6���� ����/0����D������=,��@
�> ��� ��� ������.����� ��� ���������92������ ��� ����� �6������ 2��� ���5��A����� �����������8����2�����������2��������������,��8������
�> ����5��2������������F��.���������9���������������������������������������������
�> ��������������������� ��� ���������%������������B�����������2��9��������������6�����������6����������5A�.������������������
$��������2��������� ����� ���������P����������---35�4��������� ��� P��������� ��� ����9,��� �� #$�� ����$������ �2��������� ����� ���������P����������---������ ���������� �5#������,����� D������9,������ ��� ������������:����2�������� ������;�$�� ������������Z������.�������������:����� �� ���������� 2��� ������9���� ��� �5����������� ��� ��� ��������� ���P���������
#�D��J����2�������������2��������������#�%���������������8�D��<����,���� ��,������������ �����������2��3�� �������� ���2��� ��� ����,��� � ��������.��� ��� "((�� ��� #�D� �J���� ���2��O2����2�����������������������92������ #$���
$7����%���������@�<��2@OOJJJ�,��<�������
Placa Narcís de Monturiol al Mérito "���������V�����%�������
La Generalitat de Catalunya otorgó a CIMNE el 3 de noviembre de 1999 la Pla-���*���� ���$�����������$�����"����-co y Tecnológico:
> Por su contribución al desarrollo de nuevos métodos de análisis y Dise-ño de productos y procesos en Inge-niería.
> Por el impulso a la colaboración en-tre el mundo de la Investigación y el mundo industrial.
> Como reconocimiento a la tarea de formación avanzada y a la promo-ción de la ciencia y la técnica en el ámbito internacional.
Mención Especial al Premio Ciudad de Barcelona 1999
El Ayuntamiento de Barcelona otorgó a CIMNE una Mención Especial al Premio Ciudad de Barcelona 1999 en la moda-lidad de Investigación Tecnológica al tra-bajo realizado por los Drs. P. Roca, M. Cervera y E. Oñate sobre la modelización y Simulación por ordenador de la estruc-tura de la catedral de Barcelona.
IST Award al mejor producto del Infor-mation Society Technologies Progra-mme de la Comisión Europea
La Comisión Europea otorgó en noviem-bre de 2001 el IST Award al pre/post pro-cesador GiD desarrollado en CIMNE.
Más información en: http://www.gidhome.com
Narcís de Monturiol Plate Award to the Scientific and Technological Merit 1999
On November 3, 1999 the Generalitat de Catalunya granted to CIMNE the Narcis de Monturiol Plate Award for Scientific and Technological Merit:
> For its contribution to the development of new methods for analysis and design for products and processes in engineering.
> For the fostering of cooperation between industry and university research groups.
> For many training activities and the promotion of science and technology at the international level.
Special mention to the Ciudad de Barcelona Award 1999
The City of Barcelona awarded CIMNE a Special Mention to the City of Barcelona Award, 1999, in the category of Technological Research for the work carried out by Drs. P. Roca, M. Cervera, and E. Oñate on the modeling and structural analysis of the Barcelona Cathedral.
IST Award to the best product of the Information Society Technologies Programme of European Commission.
The European Commission granted in November 2001 the IST Award to the pre/post processor systems GiD deve loped at CIMNE.
More information in: http://www.gidhome.com
Línies i projectes d’investigació i desenvolupament
Líneas y proyectos de investigación y desarrollo
Research and development lines and projects
75
��� �� ����������! ��� ��� �� ��������������
#$�� <�� ���� �� ������ �7�� ����&+-�2��4�������G�������,����;������9����2�������������%6�������������=9,����������������A���������G��,��8������������6�����
3��� ����������� �G�������,����� ���� #$������������������ ��� ���� �����A�����1��������������������1�������
������2A,�������,M����������������������2�����2����������������G�������,�������������A���;����/���������2��4�������G#KK�� ���������2���� ��� ���� ��8��"((-9"(�(��
������ �� �������� �� ������������
$6���������6����
$��A���������=������������������
E����9���A��������2���������
$��A����������[�����
$��������
$6�������5�2�����:����
��������,�������
������A����
�,��8�����������2����
�,��8�����������
���,������������.����
������������%�.�������
�,��8�������������������
�,��8������5��������
�,��8�����.���6����
$�������������������������
�����2����2�����������
D������,������������%������������������������
#����F��,6���������0����
LÍNEAS Y PROYECTOS DE INVESTIGACIÓN Y DESARROLLO
CIMNE ha llevado a cabo más de 1379 proyectos de investigación, desarrollo y transferencia tecnológica en diversas áreas de la Ingeniería y la ciencia.
Las actividades de Investigación del CIMNE estan divididas en las tres áreas que se muestran en el cuadro.
En las páginas siguientes se describen las principales actividades de investi-gación de cada área, así como los pro-yectos de I+D+i desarrollados durante los años 2009-2010.
R+D BÀSICA R+D SECTORIAL R+D TRANSVERSAL
Métodos numéricos
Mécanica de sólidos y estructuras
Fluido-dinámica computacional
Mecánica estocástica
Materiales
Métodos de optimización
Electromagnetismo
Geomecánica
Ingeniería aeroespacial
Ingeniería civil
Energía y medio ambiente
Procesos de fabricación
Ingeniería marina y naval
Ingeniería de alimentos
Ingeniería biomédica
Modelos sociales y económicos
Pre y post proceso
Tecnologías de la Información y comunicaciones
#���%�����������
RESEARCH AND TECHNICAL DEVELOPMENT LINES AND PROJECTS
CIMNE has carried out more than 1379 research, development and technological transfer projects in different areas of science and engineering.
CIMNE’s research and technical development (RTD) activities are split into the following three areas shown in the box.
In the following pages the main activities in each research line are described together with the RTD project aut carried during 2009-2010
BASIC RTD SECTORIAL RTD TRANSVERSAL RTD
Numerical MethodsSolid and Structural MechanicsComputational Fluid DynamicsStochastic MechanicsMaterialsOptimization MethodsElectromagneticsGeomechanics
Aerospace EngineeringCivil EngineeringEnergy and EnvironmentManufacturing ProcessesMarine and Naval EngineeringFood EngineeringBio-Medical EngineeringEconomical and Social Models
Pre and post processingInformation and Communication TechnologyArtificial Intelligence
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
a� $6�������G���������0�����2����G��A����������������9�����������=��������G�������������
a� $6������������������2������$��A���������=�����
a� ��A����� ��� 2��.������ ��� ��������9��?����0���������=�������2���������� ���$��A��������%��������
a� �����������2��������A�������������9���������
a� $6������ ���6����� 2��� �G������� ���2��.������ ���.����� ��� $��A����� ����=����;� H����������� ]���9����������;�2��.������ ��������A����;� ���.��9��������������,�6��������
a� ��.������� ����6������ �G��������� 09����������2���/���������$��A���������������
��$����� ����&��� ����� ��������'-lisis lineal y no-lineal de sólidos y estruc-turas.
��Métodos sin malla para mecánica de sólidos.
��Análisis de problemas de discontinuida-� �<��� ����� ��� ���� ��`��������en mecánica de fractura.
��Elementos de placa y lámina sin rotaciones
��Métodos numéricos para estudio de problemas acoplados en mecánica de ���� !� Z��������� ����J ��������!�problemas termomecánica, acoplamien-to electromag nético, etc.).
��"�&���������&����� ����&��� ��-nitos y partículas en mecánica de sólidos.
�� Finite element methods for linear and non linear analysis of solids and structures.
�� Meshless methods in solid mechanics
�� Strong discontinuity analysis in solids. Applications to fracture mechanics.
�� Rotation-free plate and shell elements
�� Coupled problems in solid mechanics (fluid-structure interaction, thermal-mechanical problems, electromagnetics, etc.)
�� Combination of finite element and particle methods in solids mechanics.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Chaves, W.V., Mecánica del medio continuo: modelos constitutivos, CIMNE, 2009
Oñate, E. and Kröplin, B., ]�}�� ������������������-table structures iv, CIMNE, 2009
Oñate, E., Owen, D.R.J. and Suárez, B., Computational plas-ticity x. Fundamentals and applications, CIMNE, 2009
Oñate, E. and Owen, D.R.J., Particle-Based Methods: Fundamentals and Applications, CIMNE, 2009
Godoy, Luis A., Estabilidad de Estructuras. Una pers-pectiva histórica, 270 pp., CIMNE, 2010
Wisniewski, K., Finite Rotation Shells Basic Equations and Finite Elements for Reissner Kinematics, 483 pp., CIMNE, 2010
Chaves, E. W., Mecánica del Medio Continuo: Concep-tos Básicos, 458pp, CIMNE, 2010
$ b�# �����3#��#��D�C DC��$�"�*#"`�?����_#?+������V|�"V�|`�SOLID AND STRUCTURAL MECHANICS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
77
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Zienkiewicz, O.C. y Taylor, R.L., El método de los ele-������������#[� �������������� �����£¢¤��#�2010, CIMNE, 2009
Kvamsdal, T., Pettersen, B., Bergan, P., Oñate, E. and Gar-�����#������������� ���!����������������������III, 359 pp., 2009, CIMNE, 2009
�����������������������������������������Computa-tional methods for coupled problems in science and engineering III, 30 pp., 2009, CIMNE, 2009
Ortega, E., Flores, R., Oñate, E., Sacco, C., González, E., Innovative numerical tools for the simulation of parachutes, CIMNE PI341, 2010
De Mier, M., Idelsohn, S., Oñate, E., Advances in the ���� ��������� ��������������!�!������� ������element method Application to bubble dynamics, CIMNE PI342, 2010
Ortega, E., Flores, R., Oñate, E., A 3D low-order panel method for unsteady aerodynamic problems, CIMNE PI343, 2010
a� $6�������5���������0�����������������0����� ����.����:���� ��� $��A����� ���]����������2�����.���������2�����.���
a� $6�������5���������0����� �����2���/9���������$��A��������]�������.���92��%/�����������
a� $6������ ���6����� 2��� �5��A����� ���2��.����������������2�������� ���$�9�A����� ��� ]����� H����������� ]���9����������;� ]��� �6����;� ���.����������������,�����;�����I�
a� $6���������������������$��A��������]����
���$����� ����&��� ����� �����Q���-&� � ���� � ����>��� � �� &�'����������� ����&��� �� �����&�� ��
��$����� � ��&�������&�'�����������
��$����� ����&��� ����� ������������ ���&�'����������� ����� ����������
��Métodos numéricos para análisis de pro-blemas multidiscipilinares en mecánica de ����� � Z��������� ����J ��������!� �����térmico, acoplamiento electromagnetico)
�� Stabilized finite element and finite volume methods in compressible and incompressible fluid mechanics
�� Meshless methods in fluid mechanics
�� Finite element and particle methods for free surface flows.
�� Numerical methods for multidiscipli nary problems in fluid mechanics (fluid-structure interaction, thermal flows, electromagnetics, etc.)
E3C#9#�b$# �� �$ CD� #���3�_�#?+J?#*�$#"`�"+$U�V`"#+*`_COMPUTATIONAL FLUID DYNAMICS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
a� ��������2������ ��� �6������ ���$����9 ����� 2��� �5��A����� �����A��������$��A��������2�����������
a� ��������2������ ��� ��� ���������� 4���� 2��� �5������� ��� 2��.�������5�2�����:���������������2��������
a� ��������2����������6�������5���������0����������A������
a� ���.������� ����6������ �����A������ ���6�������5���������0��������$��A��9�������=����������]�����
a� #�����0������ ��� 2��A������� ��.��6�����������A�������
a� $6������ �����A������ 2��� 2��������� ������������� ��� ��� ���R������ ���� ���%��9���
��Desarrollo de métodos de Monte-Carlo para análisis estocástico en mecánica computacional.
��Desarrollo de la teoría de juegos para es-tudio de problemas de optimización multi-disciplinares.
��? ����������&����� ����&��� ���-tos estocásticos.
��Acoplamiento de métodos estocásticos y &����� ����&��� ����� ���&�'�-����� ���� ������� �
��#���������������'&��� �����&����� �estocásticos.
��Métodos estocásticos para procesos de Si-mulación en la industria del conformado.
�� Monte-Carlo methods for stochastic analysis in computational mechanics
�� Game theory for multidisciplinary optimization problems
�� Stochastic finite element methods
�� Coupling of stochastic methods and finite element methods in solid and fluid mechanics
�� Parameter identification via stochastic methods
�� Stochastic methods for computer simulation of industrial forming processes.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Lantada, N., Pujades, L. G. and Barbat, A. H., Vulnerability index and capacity spectrum based methods for urban seismic risk evaluation. A comparison, Natural Hazards, 51, 501–524, 2009
Lau, K., López, R., Oñate, E ., A neural networks appro-ach to aerofoil noise prediction, PI335 CIMNE, 2009
Marulanda, M. C., Cardona, O. D. and Barbat, A. H., Robustness of the holistic seismic risk evaluation in urban centers using the USRi, Natural Hazards, 49(3), 501-516, 2009
$ b�# ���D� b�D# �MECÁNICA ESTOCÁSTICASTOCHASTIC MECHANICS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
79
a� ����� ������� ������������� 2��� ����9������ %����������� H%����,�;� ��1���� ��9����8I����������������A�F�����
a� $������ ��� ���2��������� ��� ����9���������2������
a� $�����������������������
a� $����������������������.�����������
a� #�����0���������2��A������������������������������������������
a� $�������������������2����6�����������������������������
��Nuevos modelos constitutivos para mate-riales friccionales (hormigón, rocas terre-no) y materiales metálicos.
��Modelos de comportamiento de materia-les compuestos.
��Modelos de nanomateriales.
��Modelos constitutivos de biomateriales.
��#���������������'&��� ���&���� �constitutivos de material.
��Modelos de materiales para el método de elementos discretos.
�� New constitutive models for frictional materials (concrete, rocks, soil) and metallic materials.
�� Constitutive models for composite materials
�� Nano-materials models in mechanical
�� Bio-materials constitutive models
�� Parameter identifications in constitutive models of materials
�� Material models for the discrete element method.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Molina, M., Oller, S., Barbat, A. and Martinez, X., Estudio de estructuras de Hormigón reforzado con FRP mediante la Teoría de Mezclas Serie/Paralelo, Rev. Internacional de Ingeniería de Estructuras, Vol.13 y 14, 1, pp. 29-55, 2009
Idelsohn, S., Mier-Torrecilla, M. and Oñate, E., �� ��������������!�!�\����� �_�����; ��������!������-puter Methods in Applied Mechanics and Enginee-ring, Vol. 198 (33-36), pp. 2750- 2767, 2009
Di Capua, D., Mari, A., Oñate, E., Modelo higro-termo-mecánico para estructuras de hormigón armado expuestas al fuego, CIMNE M113, 2009
Hernández, J.A., Oliver, X., Cante, J.C., Numerical Mo-delling of Crack Formation in Powder Compaction Processes, CIMNE M114, 2009
Ciampi, V., Oller, S., Addesi, D., Multi-scale techniques for masonry structures, CIMNE M119, 2010
$�D�#�3�MATERIALESMATERIALS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
a� ���������2�������5��,���������5�29�������:�����.����������6���1�������,��9������
a� ��������2������ ��� �6�������5�2�����:����� .������ ��� ��,������������������
a� ������6������ 2��� ������8� �2���� ��9.�������$��A���������=�����������]�����������:�����������������4����
a� #�����0������ ��� 2��A������� ��� ��9����� ������������� ��.� �6���1�����5�2�����:�����
a� $6������2��������������0��������������9����=2��������2����������5�2�����:����
��Desarrollo de algoritmos de optimización basados en técnicas de gradiente.
��Desarrollo de métodos de optimización basado en algoritmos evolutivos.
��Nuevos métodos para diseño optimo ro-�� ��� �� &�'���� �� ���� � �� ����� !�utilizando teoría de juegos.
��#���������������'&��� ���&���� �constitutivos con técnicas de optimiza-ción.
��$����� ������������������������&�����optima en procesos de optimización
�� Development of optimization algorithms based in gradient techniques
�� Development of optimization methods based in evolutionary algorithms
�� New methods for robust optimal design using game theory
�� Parameter identification in constitutive models via optimization technics
�� Identification of the optimal mesh size in optimal design processes
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Rastellini, F., Oller, S., Salomon, O. and Oñate, E. Compo-����������� ����� ��������� ������ ����������-inforced laminates. Continuum basis, computational aspects and validations, Computers and Structures, Vol. 86 (9), pp. 879-896, 2008
Neittaanmaki P., Périaux J. and Tuovinen T. (Eds.), Evo-lutionary and Deterministic Methods for Design, Optimization and Control, 492pp., CIMNE, 2008
Kouhi M., Oñate E., Bugeda G., Robust design methods in aerospace engineering, , PI328 CIMNE, 2008
Bugeda G., Ródenas J. J y Oñate E., An integration of a low cost adaptive remeshing strategy in the solution of structural shape optimization problems using evolutionary methods, Computers and Structures, Vol. 86 (13-14), pp. 1563-1578, 2008
$cD���5� D#$#V� #dMÉTODOS DE OPTIMIZACIÓNOPTIMIZATION METHODS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
81
a� ��������2������ ��� ���������� ����9�����,�6��1���� ������:���� ������ ��%��9�A���1����1�����������;���������6��9���� ���6����� 2��� ��� ���������� ��� �����1�����������$��J���������2���������9����������;�0�����������2���2�������9����� �� �5��A����� ��� %�������� �������9��,�6�����
a� ������ ���� ���2��������� ��� ��������2�������� �����������;�����������,�9����������� ����A1������ ��6����1���� ���1�������.������������2�������������
a� ���������� ���������,�6��1���� 2����������������2�������������5���������
a� ����������5�����2����������2����.����2�����������,�6������
��Desarrollo de soluciones electromagnéti-cas empleando herramientas informáti-cas, que incluyen desde métodos numéri-cos para la Simulación de las ecuaciones de Maxwell en espacios tridimensionales hasta códigos para el procesado y análisis de fenómenos electromagnéticos.
��Estudio del comportamiento de nuevos dispositivos y materiales, como nuevas generaciones de máquinas eléctricas o aquellas basados en superconductores.
��Soluciones electromagnéticas para el con-trol y procesado de alimentos.
��Procesos de estampación de chapa con campos electromagnéticos.
�� Development of electromagnetic solutions using computing tools: ranging from numerical methods for the simulation of the Maxwell’s equations in three-dimensional spaces, to codes for processing and analysing electromagnetic phenomena.
�� Study of the behaviour of new devices and materials such as: new generations of electrical machines or superconductor-based machines.
�� Electromagnetic solutions for food control and processing.
�� Sheet stamping processes via electromagnetic fields.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Zienkiewicz, O.C., Taylor, R.L. y Nithiarasu, P., El método �� ��� �������������#[� �������������������512 pp., 2010
Otín, R. , ERMES : Numerical tool for SAR computa-tions, IT584, CIMNE, 2009
Otín, R. , Numerical study of the thermal effects indu-ced by a RFID antena in vials of blood plasma, IT583, CIMNE, 2009
������������������������������������������Computa-tional methods for coupled problems in science and engineering III, 30 pp., 2009
Bouillard, Ph. and Díez, P., Adaptive modeling and simu-lation, 220 pp., CIMNE 2009
3 D��$���D#�$ELECTROMAGNETISMOELECTROMAGNETICS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
a� $6���������6���������B����2��������9�������5�1����������.�����������2��9������
a� ������6������������������������A��9������2����������
a� ��,�������� �����������2��� ��� �����������,����������������,�.������
a� $6�������5�����2������5������������9��������2��.���������A�����������������]����
a� $6������ 2��� �����0���� ��� 1�������� ��������������������6��1����������A���������2���������
��Métodos numéricos avanzados para solu-ción de ecuaciones con derivadas parcia-les.
��Nuevos métodos sin malla en mecánica computacional.
��Algoritmos innovadores para la solución de grandes sistemas algebraicos.
��Métodos de estimación de error y rema-llado adaptable en mecánica de sólidos y �����
��$����� �������������� ��� ��������� �� �soluciones numéricas en mecánica com-putacional
�� Advanced numerical methods for solving partial differential equations.
�� New meshless methods in computational mechanics
�� Innovative solution algorithms for large algebraic systems
�� Error estimation and mesh refinement techniques in solid and fluid mechanics
�� Methods for certificating the quality of the numerical solution in computational mechanics
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Zienkiewicz, O.C., Taylor, R.L. y Zhu, J.Z., El método �� ��� �������������#[� �� ��������¡¥���#CIMNE, 2010
Zienkiewicz, O.C. y Taylor, R.L., El método de los � �������������#[� �������������� �����£¢¤��#CIMNE, 2010
Zienkiewicz, O.C., Taylor, R.L. y Nithiarasu, P., El método �� ��� �������������#[� ��^����������������512 pp., CIMNE, 2010
Bouillard Ph. and Díez P., Adaptive modeling and simu-lation, 220 pp., CIMNE, 2009
Oñate E. and Owen D.R.J., Particle-Based Methods: Fundamentals and Applications, 463 pp., CIMNE, 2009
Dadvand P., Rossi R. and Oñate E., An object oriented ��%�������������%� ����������� �������������multi-disciplinary applications, Archives of Computa-tional Methods in Engineering, Vol. 17 (3), 2010
$cD����C$c�# �$�V+?+��*�$�|#"+�NUMERICAL METHODS
INVESTIGACIÓ BÀSICA / INVESTIGACIÓN BÁSICA / BASICS RTD
83
a� ��������2�������������������������9�����2��� �5����������� ���2����������������������������1����2����6���������6�����
a� ��������2������ ��� �6�������5���������0�����2����5����������2��.��9�������.����������,��8�����,���6������
a� ��������2���������������������A��������6���������6��������<����,����,���
a� ������ ���� ���,���� ��� 2����� ��� ��91���A�����5�.���2R.������
a� ��������2������ ��� �6�������5��������� ��������� 2��� �� 2��.���������,������A�����
a� ��������2������ ��� �6�������5���������0����� �����2���/������2�����2��.���������,�����A������
a� ��������2������ ��� �6��������6����� 2��� �� 2��.������ �5�.������.����A�����
��Desarrollo de modelos constitutivos para estudio del comportamiento del suelo y rocas por métodos numéricos.
��? ����������&����� ����&��� ���-tos para el estudio de problemas acopla-dos en Ingeniería geotécnica.
��Desarrollo de modelos de cálculo y méto-dos numéricos en hidrogeología.
��Desarrollo de métodos de elementos dis-cretos para problemas de geomecánica.
��? ����������&����� ����&��� ����� ���partículas para problemas de geomecánica.
��Estudio del desgaste en piezas de maqui-naria de obra pública.
��Desarrollo de métodos numéricos para problemas de obras subterráneas.
�� Develop of constitutive model for study the constitutive behaviour of soils and rocks by the finite element methods.
�� Development of finite element methods for coupled problems in geotechnical engineering.
�� Development of finite element and particle methods for modelling and analysis of bed erosion in free surface flows.
�� Development of discrete element methods for geomechanical problems.
�� Develop of particle finite element method for geomechanical problems.
�� Develop of numerical method for underground construction problems.
�� Study of tool wear in construction machines.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Zienkiewicz, O.C., Taylor, R.L. y Zhu, J.Z., El método �� ��� �������������#[� �� ��������¡¥���#CIMNE, 2010
Zienkiewicz, O.C. y Taylor, R.L., El método de los � �������������#[� �������������� �����£¢¤��#CIMNE, 2010
Zienkiewicz, O.C., Taylor, R.L. y Nithiarasu, P., El método �� ��� �������������#[� ��^����������������512 pp., CIMNE, 2010
Bouillard Ph. and Díez P., Adaptive modeling and simu-lation, 220 pp., CIMNE, 2009
Oñate E. and Owen D.R.J., Particle-Based Methods: Fun-damentals and Applications, 463 pp., CIMNE, 2009
Carbonell J.M., Oñate E. and Suárez B., Modeling of �������}��%��������!�!������� ������� ��������!��������� ��;�������������!������?@�;�[� #136 (4), 455-463, 2010
��$ b�# �GEOMECÁNICAGEOMECHANICS
INVESTIGACIÓ TRANSVERSAL / INVESTIGACIÓN TRANSVERSAL / TRANSVERSAL RTD
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Chacón R., Guzmán F., Mirambell E., Real E. and Oñate E., Wireless sensor networks for strain monitoring during steel bridges launching, Structural Health Monitoring, Vol. 8 (195), 2009
Rahim A., Application of shape optimisation in aeron-autics, IT579, CIMNE, 2009
Oñate E., Las TIC en ingeniería civil, PI320, CIMNE, 2008
Oñate E., Sistemas de apoyo a la decisión, PI319, CIMNE, 2008
Research lines and RTD projects in biomedical engi-neering, IT 589, CIMNE, 2009
a� ��������2������ ��� 2����%������ ��#�������� 2��� �4���� �� ��� ,������ �� %��9�������5�������������������������
a� �2�������� ��� ���D# � �� 2��������� ���%�.�����������������R�����
a� ��������2������ ��� ��������� ��� �����9:����������������������.�����������������������;�.�������������;������������%���9�A����;��6�������������������2���������9�������6���1�����5�����F��,6���������0����
a� ��������2����������6�����������9�������,�� ��� �������������� �� ���0��������������������������������0����D# �
a� $6������2����������,��������,���������������������������������0������2����9%�������5#�������
a� ��������2������������,������������9������ �5��%�������� ,��,�A0��� ��.������������������:�������������������
��Desarrollo de plataformas en Internet para ayuda a la gestión y formación de indivi-duos y comunidades
��Desarrollo de sistemas de apoyo a la de-cisión combinando redes de sensores, bases de datos, sistemas infomecánicos, métodos de Simulación por ordenador y ������ ������%�����������
��Aplicación de las TIC a procesos de fabri-cación en la industria
��Métodos para integración y gestión de re-des de sensores inalámbricos en platafor-mas de Internet
��Desarrollo e integración de sistemas de �<��&����� %�%�'���� ���� �&� � ��apoyo a la decisión.
��Desarrollo de métodos de monitorización ����� ������� ������� �Q����� ���sensores inalámbricos y TIC.
�� Development of Internet tools for supporting management and training activities of individuals and organizations
�� Methods for integrating and managing wireless sensors in Internet platforms.
�� Development of health monitoring methods for constructions and buildings using wireless sensors and ICT.
�� Development and integration of geographic informations tools into decision support systems.
�� Development of decision support systems integrating wireless sensors, networks, data bases, info-mechanics systems, computer simulation methods and AI technology.
�� Application of ICT to manufacturing processes in industry.
D ��3��#���3��#�E��$� #d�#��3��� �$C�# � #���V�"*+_+@�`��?��_`�#*�+|$`"#�*���_`��"+$�*#"`"#+*��INFORMATION AND COMMUNICATION TECHNOLOGY
INVESTIGACIÓ TRANSVERSAL / INVESTIGACIÓN TRANSVERSAL / TRANSVERSAL RTD
85
a� ��������2������ �� ���������������� �����������2��� ��2���2���7�����HJJJ�,��<�������I
a� ��������2����������6���������,�9�������� ��� ������ ������������� �� ���������������
a� ��������2������ �� ����,������ �����6���1���� �5�������� ��� ������ 2���2��,��������� ����������2��� ������9��������,����A����
a� D6���1���������������:�����,�A0���2���2��.����������������������,����A���
a� �������������������2����A�����2������9������0�������2�������5����,����6��1����
a� #���,������ ��� ��������� �5��%��������,��,�A0��� ��.� ������ ��� �A����� 2������������0�����
a� $6���������2���������:��������,��9��������2���2��.�������5�2�����:��������%������
��Desarrollo y mantenimiento del sistema de pre y postproceso GiD (www.gidhome.com)
��Desarrollo de métodos de generación de malla estructurada y no estructurada
��Desarrollo e integración de técnicas de entrada de datos para programas de Si-mulación por ordenador de gran tamaño
��V����� ���Q ���>�����%�'������������-blemas de Simulación de gran tamaño
��Generación de datos para el cálculo por �&��� � ���� � �� ������ �� &'%� �médicas.
��Integración de sistemas de información %�%�'���� Z@�\� ���� �&� � �� ��� ��postproceso y códigos de cálculo por ele-&��� ����� �
��Métodos de parametrización de geome-trías para problemas de optimización de formas.
�� Development and maintenance of the GiD pre and post processing system (www.gidhome.com).
�� Development of methods for generating structured and unstructured meshes.
�� Development of imput data technology for large scale computational problems.
�� Graphical visualization techniques for large scale simulation problems.
�� Generation of input data for finite element analysis from medical images.
�� Integrations of geographical information systems (GIS) with pre and post processing tools and finite element analysis codes.
�� Meshless methods for the parametrization of geometries for shape optimization problems.
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
Soudah E. , Desarrollo de una herramienta de pro-cesamiento de imágenes médicas en MATLAB y su integración en medical GiD, IT595, CIMNE, 2009
GiD-The personal pre/post processor, The universal, adaptive and user friendly pre and post processing system for computer analysis in science and enginee-ring, V10, CIMNE, 2010, <www.gidhome.com>
Pasenau M., Escolano E., Suit J., Coll A., Melendo A., Mon-ros A., Chico F., Dadvand P., GiD 2010, 5th Conference on advances and applications of GiD 1st Kratos Workshop, CIMNE M118, 2010
��#� ��D �� e�PRE Y POSTPROCESOPRE AND POST PROCESSING
/ TRANSVERSAL RTD
��9�����
culo por &'%� �
e información �&� � �� ��� ��
de cálculo por ele-
etrización de geome-mas de optimización de
of input data for finite nalysis from medical
ions of geographical ystems (GIS) with pre
ng tools and finite
INVESTIGACIÓ TRANSVERSAL / INVESTIGACIÓN TRANSVERSAL / TRANSVERSAL RTD
���� ��� ��������PUBLICACIONES RECIENTES
RECENT PUBLICATIONS
López R., Flood. An open source neural networks C++ Library, CIMNE M120, 2010
Lau K. , López R., Oñate E., A neural networks appro-ach to aerofoil noise prediction, PI335, CIMNE, 2009
Oñate E., Sistemas de apoyo a la decisión, PI319, CIMNE, 2008
López R., Balsa-Canto E. and Oñate E., Neural networ-�����%��������� ���� �����������������J��#������ for Numerical Methods in Engineering, Vol. 75 (11), pp. 1341-1360, 2008
a� ��������2������ ��� ������� ������������ ����0������ 2��� 2��.�������5�2�����:����;� �5��A����� ������;� �� ���2���������������������%������A2����
a� #���,������ ��� ���� ������� ��� �����9��������0��������������������������:�9����� �� ��� �������� ���.������ ���������� �������� ������ 0��;��6������ ��� ��9�������� 2��� ���������� �� �6���1�����5�����F��,6���������0�����
a� ��������2������ ��� �6���1�����5�����F��,6����� ����0����� .������� �����������5�,�����
a� �2����������������������������������������0������2������������0���������2��A9�����������1�����������������������
a� ��������2����������������5���������0����� �����F��,����� ������:���� �6���1�����5�����F��,6���������0�����
��? ������������ ��������� ��������-les para problemas de optimización, análi-sis inverso y toma de decisiones de forma rápida.
��#��%������ �� � �� � �� ������ � ����-ciales en sistemas de apoyo a la decisión combinando redes de sensores inalámbri-cos, métodos de simulación por ordena-������������ ������%������������
��Desarrollo de técnicas de inteligencia arti-������� ��� ����� ����%�� �
��Aplicaciones de las redes de neuronas ������� � ����� ��� ���������� �� ��Jrámetros en ecuaciones constitutivas.
��? �������������%� ����&��� ����� �inteligentes utilizando técnicas de inteli-%������������
�� Development of artificial neuronal networks (ANN) for optimization, inverse analysis and fast decision making.
�� Integration of artificial neuronal networks (ANN) in decision support systems combining wireless sensors, computer simulations methods and artificial intelligence technology.
�� Development of artificial intelligence techniques based in agent simulations.
�� Applications of artificial neuronal networks (ANN) technology for parameter identification in constitutive laws
�� Development of intelligent finite element methods via AI technology.
#�D3F3#�c� #����D#E# #�3INTELIGENCIA ARTIFICIALARTIFICIAL INTELLIGENCE
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
87
�������� ��
�,��8�����������2�����
�,��8�����������
���,������������.����
������������%�.�������
�,��8�������������������
�,��8������5��������
�,��8�����.���6����
$�������������������������
R+D SECTORIAL
Ingeniería aeroespacial
Ingeniería civil
Energía y medio ambiente
Procesos de fabricación
Ingeniería marina y naval
Ingeniería de alimentos
Ingeniería biomédica
Modelos sociales y económicos
SECTORIAL RTD
Aerospace Engineering
Civil Engineering
Energy and Environment
Manufacturing Processes
Marine and Naval Engineering
Food Engineering
Bio-Medical Engineering
Economical and Social Models
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
a� ��������2�������5���������0���������.����:�������6������������������2����5��A��������]�����������������.���������������������9:���������������������
a� ��������2��������� �6���1�����������������������������&;� ���6���1���������0�������2�����]��������2�����.�����������2���9��.����
a� �����8����%�������2����������������A����;����.�������.������0������������A������������2����������������
a� ��A���������A���������A�����5������������������2����������������������2������
a� ��������2����������6���������6�����2�����A�����������A���������2������,������
a� ��������2�������5���������2�����2���92���7��H��I�2����5��A��������2���������������,��8����������2������
a� ��������������������������������������&�
a� �������,��������2���2��.�����@�����������2���A�������������A�9����@� ���������������;� ]����� �6�����;� ���������,���������;� ����9��R�����;�����
��? �����������&��� ����� � ����>��� ���&����� � ��&��������������'� ������� ���&�Q&������ ��� ����� ���>�������� -tructurada.
��Desarrollo de técnicas de mallado estructurado en 3D, y técnicas de ����&������&�������������� ���&�� �� �����&�� �� ��
��? �����<��&� ����&� ��������'&��!���&����������������-miento automáticamente adaptado de la malla.
��Análisis estático y dinámico de estructuras aerospaciales de materia-les compuestos.
��Desarrollo de métodos numéricos para análisis aeroelastico de para-caidas.
��Desarrollo de herramientas de pre y post-proceso (GiD) para el análisis computacional en Ingeniería aerospacial.
��Técnicas de generación de malla no estructurada en 3D.
��Nuevos algoritmos para problemas multidisciplinarios en aeronáutica: ����� �����!����� ����&�� !������&�%�� &�!������� ���!����
�� Development of unstructured grid stabilized finite element and meshless methods for analysis of fluid flows.
�� Development of 3D adaptive mesh refinement techniques for compressible/ incompressible flows.
�� Optimum shape design in aerodynamics combined with adaptive mesh refinement.
�� Structural analysis of composite aerospace structures under static and dynamic load.
�� Aeroelastic analysis of parachutes.
�� Development of pre/ post processing tools (GiD) for aerospace engineering problems:
�� 3D unstructured mesh generation
�� Analysis data definition
�� Visualisation of results
�� New algorithms for multidisciplinary problems in aerospace engineering: aeroelasticity, thermal flows, electromagnetics, aeroacoustics, etc
��#�Y�#������ � #�3INGENIERÍA AEROSPACIALAEROSPACE ENGINEERING
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
89
�"�$ ����� ���%������ ������%����������&���%�������'��(��'����)�������-=������������������������.���������"����')(+)*((3��,()(>)*('*
�*����� ���������������+�����)�� ����*%������������������������������'��� ���������������-�������������������������.�����������)�������')(3)*((3��,')(?)*('*
,�"���# �,�"� �������� ��%���)�%�������������%����������� �������#������-�������������������������.������#0�')(3)*((3��,')(?)*('*
��� ���������������������� ���������������������������������� �!����� ���������-�������������������������.�����������')'()*('(��,()(3)*(',
�*��# ��������������������%���������%�*������������#'��%�����������'������� �-������%+���-�������������������������.������#����@���� A��� ��4� �5���.�'+)(>)*('(��'>)(>)*('>
!�#��� �!�)����%������ �����*%�.���������#-.��!#������������������%������������*������ �������������-�������������������������.�������������<�;���;���<�����.�5<')(3)*('(��,')(?)*(',
������!� ������+�����)���� ��+������������������������%������������+���������+�������&��!����������%���������-�������������������������.���������"������')(+)*((3��,()(>)*('*
!��� �!�)����%����������� )���� �-�+�� ��)������������������'%������'������%���������������������������/����*����������������*�+0����)��������.���������"��������������������������������������#=���!�����'*)'*)*((-�,')'*)*('(�
��#��1� �2���*2������ ����)������3�� ����������������+� ����������������� ������)�3��������.��������4�������������������������������5���������;.���4������; �=(3)(+)*((?�(3)(+)*('(
-�$��� �-��'������������ ���� �$��� �����'�������)����%�����-����������!�����������������������.������� ������������������������������ ��������;����!B���������������;�C����D���!��.��E��&����������1���%� � ����#�������������� ���A��55 �����������.��5� ����<���5���������4�4��������������5����������F����<�A�$G���������/��"����������%���&���������� ������ ���������&�;;����������������. ��<��=�=���AH���������;��I�� .������������:��:�����������;����%��0%���; �������������F����<��A��5�������� ;���F��������5���:��������4 ���������"�����F����<��A�!��:��;4<����!�%���;;��:�A��A ��5� ������5 ;�����%5D:��� ������� ���:;��.�%�"&���5������=�����G������������ ����������� �������=�=���#�0!�����;����!��;AJ�F�������G���4������ �(')'*)*((?�,()'')*('*
�1���2 �!���������� ��'����%��������������� ���4���1����� ����%2����*���������5������� ������=��K��6*((?�*(''7��������������!����������������������#����L��.����������6%=�" 4�.�7')(')*((3���,')'*)*(''
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
��"#�6��#-��� ���)��������������%������������%��������'7+�� ������������� � ���� ������)�����������������*��3�������������������� ������%� ���� ������������� ������=��K��6*((?�*(''7�����!����������������������#����L��.���������0��� $���������������� ��!�!�����"�������������!�������������� �M����������!����������������$�#����� �!�������=�=� ���#���%� ��!������!������%�����!� ���������� %���������!������N���!��&�����(')'()*((3�,')'*)*('(
�����8!���9 �!���������� ������������%���)�����)���)��.� ��'7+�� ��������������%�.���3�� �����/����������������5���������������������%�����+0���)�� ������=��K��6*((?�*(''7�����!�������������!�����!�������$�������������������������"���������*((?�*('(
��� �����������������������������*����������������-����������!�����������������������.����������������������������������"����� ������������/��������%���������������&������ ���"�����%&����������#0������"������� ��!�!������������������ ��������%!��������������������������"�������!����"�����������0���������12�')'()*('(��,()(3)*('*
,�!� �,�������������������������+����%����������������'� ���������������������������� ���������������������������������.������#� #��������������������������!����������� !���&!����� ����$�������!!���!������/1 ����#=0�� ����&��!����!����������!��&����������������������#����� �!=�!����������%�����!(')(3)*((+�,')(?)*((3�
�:,*; ��:,����)���������%��������������������%���$�.�����������
��!����*�$! ����* ����%����������%�*������������� *+��� � ������%��'� ������������������ �������������������������������.������� 5�������������������"����� ������"���<����5��������������� ;���F�������� ���/����G�������!�����������������! D�����������!�������%�������F=�!�������!����;A���#��" ���;��/����G�����(')'')*((��,')'()*((3
�*#��#�� ������%�� ��%�������.���3�� �������3�� �����+�0�� �����+�� ������*�������������������� ����+������������������������������������������� ���� ��� ������������������������ ������=��K��6*((?�*(''7�����!�������������!����!�������$����������.��������� ���O� %�������������������������"��'()(>)*((?�,')'*)*((3
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
91
a� ��A����� ��2��4������5������������ �� �������������� ������� �������9���������A��1���������A��1����H2����;�2�����;����0���;���������9������2����A����;���������������<����A�����1���;�����I�
a� $6���������6�����2����5���������������,����������������.��������������������������������0���������������������������
a� ����������������:������������������������,��8��������������9.�����������������������;�.�������������;��6����������A��������6���1�����5�����F��,6���������0�����H����������������I�
a� $6�������5�2�����:����������,��8�����������
a� $6������ ��� �A����� �5������������ ��� ���.������ �6������ ���5���������������]�.����
a� $6���������A������5������������ ���������������������.����������������
a� $6���������6�����2���2��.����������������2�������������,��98�����������
a� #���,�����������������������0�����.��6����������A����������9���������������������������
��Análisis y proyecto de estructuras y construcciones civiles bajo accio-� � �'��� �����'&�� �Z���� !��� � !����� !���� ������� �portuarias, cons truc ciones hidráulicas, etc.)
��Métodos numéricos para estudio de la seguridad y durabilidad de las �������� ������� ������ ������� ��Q� �
��Sistemas de apoyo a la decisión en Ingeniería civil combinando redes de sensores, bases de datos, métodos de cálculo y técnicas de inteli-%������������Z�� �������� \�
��Métodos de optimización en Ingeniería estructural.
��Métodos de cálculo de estructuras de membranas textiles y estructu-ras hinchables.
��Métodos de cálculo de estructuras y construcciones con nuevos ma-teriales.
��Métodos numéricos para problemas multidisciplinares en Ingeniería civil.
��Integración de sensores inalámbricos con métodos de cálculo para es-tructuras y construcciones.
�� Structural analysis of civil constructions under static and dynamic loads: bridges, dams, buildings, harbour structures, hydraulic structures, etc.
�� Numerical method for studying the safety and durability of structures in building and civil constructions.
�� Development of decision support system integrating wireless sensor networks, data bases, calculation methods and AI technology.
�� Optimization methods in structural engineering.
�� Finite element methods for analysis of textile membranes and inflatable structures.
�� Computational methods for analysis of structures with new materials.
�� Numerical methods for multidisciplinary problems in civil engineering.
�� Integration of wireless sensors with analysis methods for structures and constructions.
��#�Y�#�� #�#3�INGENIERÍA CIVILCIVIL ENGINEERING
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
$�� �$�����������������������-�������������������������.������"%�')(*)*((3�,')(,)*(',
2��*#1� �!�������� �� �)����%��������'�����������#����1��������� �����8#1�9������%��8<#1�=>?@9������>����%$�6�>�7�������������������������.�������103)(*)*((3��?)'()*('(
2�1� �"���*#��%�2�����%������������*����� �+������������%��8�1�9��-�������������������������.������"%�')(,)*('(��*?)(*)*('>
��"#��� �����#�%����%��������������'������#��'��A�������������*$��� �2��+��%���-�������������������������.�������������������������')'*)*((3��,()'*)*('>
$�#�� �!���������� �������A����������%5����� ����%�����3����%B����� ������� ��������C�������������� ����������(�� �* ��5%����D��B�%���������������������� ������=��K��6*((?�*(''7��������������!����������������������#����L��.�����������')(')*((3���,')'*)*(''
��#*��� ���������#������������������*��������%����+���������0��������������������������.��������M��>)(+)*((3��,')'()*(''
��E$� �!���������� ��'����%�����������������%�����3����%B����� ����������� ����������D�����%������3����������+��� � � ��%�����������3�� ����������������%� ������%B�� ��� �����%������/������ ������7������ ������=��K��6*((?�*(''7���������������!����������������������#���L��.�����������')(')*((3���,')'*)*(''
!�"��� ���%�����%��������*������� ��%������������%��������%������%��� ��D������ ���� ����� ���%�����3��� ������=��K��6*((?�*(''7��������������!����������������������#����L��.�����������')(')*((3���,')'*)*(''
��#,��# ����������.���3�� �������%��� ��)��������3�������������� �/���������* ���������D����������������3���������3 ����#B������ ������ �/����3���'��������.�����������������)����������������%����� ��������'������+��� ����������'���������)�������'��1��� ����#��'�������� ��8��#,��#96� ������=��K��6*((?�*(''7��������������!����������������������#����L��.�����������')(')*((3���,')'*)*((3
�1��*#��- ������%�������������� ���5��������!���4��������������������+���� ������=��K��6*((?�*(''7����!$�������!�������������!�����!�������$����������.������N���!��&�������������������')(+)*((3���,')'*)*(''
1�!��� ���������3�����������.���3�� ������*��%�� ���� ��� ����� ��������������3�� ��������6����������D�1��+� ��D�1���)��D��'���D�����%+��D����� ��D�F�%����D��B0���D�2���%5D�2��CD���C+�����!�%�������D�#���� � ���#�+���6��!��������������#� �����!�"��0�6"��7�.��������������������������������������=*-)'()*((?���,')(-)*((3
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
93
,�!�,�2 ����� ��� ������������������)����+���� �� ���4�� ��)5�)����� �������������������������������� ������=��K��6*((?�*(''7��������������!����������������������#����L��.���������������������������%���>)(+)*((3���,')'*)*(''
�"��� �!���������� ������������ �� �*��4���������������%����� ����������� � � �� ����G������������ ���5+�����%� ���������)�� �����������0����� ������=��K��6*((?�*(''7���������������!����������������������#������.������� �!��������������������������')'()*('(���,()(3)*('*
��E�� ������%�� ����� ������������/��*��3�D��0�����3�����&�������3�� ���+����%��7��%�������������������%�����������(')(')*((-�,()(>)*((3
!E���2-�"# ���!�"�!��E�#�*#�����#��!��H�����!������E��������"#���I��!��$�����!����*�#���� ������=��K��6*((?�*(''7��������������!����������������������#����L��.������%��!�����������������������')'()*('(���,()(3)*('*
#������#��# �#��'�����������)�*���������� ������� ������������������������������������������.������%��1����#����!$����!��&�� �%$�6!�%7���������������������.��:���>>�����!����=(')(3)*((+�,()(?)*((3
��������������'�� �������� ���������������������������������%������6�� ���������� ��K��6*((>�*((-7�����!�������������!��.�����������'>='*=*((��',='*=*((3
��J��� ���������� � ���������������������%����������������%������ �%�����*%��������'�������*�� �%���*����������%������)��*+����������������� ��=�.�F�;�5�����������������������.������������������������������&%���&������ %���"�����������!��(')(3)*((��*?)(*)*((3
��!��� ������� � ��� ���+��� � � �������������� ������������3������ �������%�����*('(�����!���������������L��$����������.������������������������������ ���. �.�!P��.�����������.��;������ ���Q������F=��;��B�������.����.�.�6�4����5������7'+)(3)*((��'>)(3)*(''
#-���� ������� ��'��%��*'� ������*���*%��'����*�'�%�����8#-��9�������*������������������������������������������������%��������������������������.������0!&��������������0����0"��"%����"����10��%������%����%��!������������������F����������;��N �������������=�(')(')*((-�,')'*)*((3
����/�������� ����������%��������������*�� ������������������������'���%�������%��������6���%��������� ��&����%������ �)����%����������� ����0��������+������ ���%�����������'��������������� ���������� ��K��6*((>�*((-7�������!�������������!��.�����������'>)'*)*((��',)'*)*((3
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
#���!�K �#'��%����%���������'��!�*%��� �K��������� ���� ������)��J�����!����������������-��������������� ��5��������������������.��������#����������������������%������%������0=����%������%������������ ���� %���2������������%��!����!������������ %���2������������%��!����!������������!�(')'()*((��,()(3)*('(
:2�� �!���������� �����%B�� ����������� ��� ����������� ��������� ��������� ������������������+��)���� ����%+����* ���B������� �����%������ ���������� ��K��6*((>�*((-7�������!���������������L��$���������.���������������������������������M(')'()*((-�,()(3)*('(
��2� �L��!�����������������*����������%�������2��+�+������������������%���!&��/�� ��"��0�%�����.��������������������������������������=*?)(')*((?���,()'*)*((3
1�!�� ��������*�����/��������)�������������1���)��D�����%���D�F�%������� �2������!��������������#� �����!�"��0�6"��7�.��������������������������������������=-)(-)*((?���,()(>)*((3
��,� ����'� �������'���%���)�%�������,������+������������%���������������-��������������������.������������������������"�%���1R%������������! ����0��4���;;�4���0���%���� �����:����� ;���������������&����������� �������#��(')'()*((?���,()(3)*(''
#�1�� �!����������������B�������������*�������� �/����� ���/�������������������� ������=��K��6*((?�*(''7�����!=������������������#���L��.��������%���� ��������������������� �����;�������.��;��1��������(3)(+)*((?�,')'*)*((3
��2���� ����� ��� ����������� � � ������������ ����/����3�� ������������� ���������%� �����������%���%���������������� ������=��K��6*((?�*(''7�����!����������������"���!��.���������!��������������������������=(')'()*((?�,()(3)*('(
!�"�2� �!�A����)���������������5%�������� �������������%���������3�� �������0������ �����������&������3�� �������7�� ������=��K��6*((?�*(''7�����!�������������!��.���������%������������������ �!�����$��!������%� �������=��������������!�!�!�����&�������S������� ��������=�=�6��"�������=��=7(')'()*((3�,')'*)*('(
����:; �2�������%������+�����)������������%�����%�����D�)��� ���3�����������%*+��� ��������� �����%B���������&����*%�������������������7�������������� ������=��K��6*((?�*(''7�����!�������������!�����!�������$����������.�������������������������������� ���. �.�!P���������(')(')*((3�,')'*)*('(
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
95
a� $6������2��� �A����� �� 2��4������5���0���� �� �������������� ����9,6����������������.����
a� $6������ ���6����� 2��� �5��A����� �� ������8� ��R����� �2�����5��������������.������������������.���������2��2���������R�9��1����
a� ����������5�0��6���������,6������5���0��������������������
a� �����������������:�������� ������������������ ������������,6������������.��������.�����������������������;�.�������������;��6����������A��������6���1�����5�����F��,6���������0�����
a� D6���1����2����5��A��������2������������������������������������9��������� ��������������.�0�������������,6��1������������.���9����
��$����� �������'���������������������� ������ ������� ���%�-ticamente sostenibles
��Métodos numéricos para análisis y Diseño acústico óptimo de estruc-turas con nuevos materiales con mejores propiedades acústicas.
��Sistemas de apoyo a la decisión en el sector energético y medioam-biente combinando redes de sensores, bases de datos, métodos de �'�������������� ������%������������
��� ������������������%����������� ������ ������� �
��Técnicas para análisis de procesos de reciclado de desechos natura-� ����� ���� ������� ���%���� ���&���&����� �
��Desarrollo de métodos de análisis y Diseño de plantas de generación de energía a partir de las olas.
�� Numerical methods for analysis and design of energy sustainable buildings and constructions .
�� Numerical methods for acoustic analysis and design of structures with enhanced materials.
�� Methods for analysis of recycling processes of natural and artificial wastes for energy saving and environmental applications.
�� Development of decision support systems in the energetic and environment sectors integrating wireless sensors, networks, databases, info-mechanical systems, computer simulation methods and AI technology.
�� Development of computational methods for analysis and design of wave power plants.
���#��#�$#��$P#�DENERGÍA Y MEDIO AMBIENTEENERGY AND ENVIRONMENT
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
��� �� � ���+���)���3�� �����5%������%� ���%+��������������������� ��� ����������/.���3�������+������ ������=��K��6*((?�*(''7����!$�������!�������������!�����!�������$����������.���������&$�������= =���������������������!%�')(�)*((3���,')'*)*(''
����; �������3�� ����������%�� �������%�*��3����C������������+�.����$��%������� ������=��K��6*((?�*(''7����!$�������!�������������!�����!�������$����������.�����������������������������#��"���;�����.���������')(')*((3���,')'*)*('(
�����"� ���%����� ���/�������������B*�������������%��� ����������3�� �������7�������� ������=��K��6*((?�*(''7����!$�������!�������������!����!�������$�����������.������N���!��&����������������������� �������� �'()(�)*('(���,')'*)*(''
2,$�,��# �!���4��������%�.���3�� �����*�'� �������)���������)������ �����������)�*�'�%������ �������� ������=��K��6*((?�*(''7��������������!����������������������#���L��.�����������������������������!L����=��')(,)*((3���*?)(*)*(''
#����M$�� �$������#��'�������2��*���*#����M$���8#����M$��9� ������=��K��6*((?�*(''7��������������!����������������������#���L��.�����������!')(*)*((3���,')(')*('*
����- ���)���������������������-����������'���#����6�����!�!�#��������������#��!���������/��0����%�����7�������������������������.����������6�5������%���;;��:�A��AT�055 ��G������� �.�!��:�;4��A��: �4�5D&7')(,)*('(��*?)(*)*(',
��!���� ��� �������������� ��� �������� ���������������������������������������'*��������������������������������������.�������� �����������������������&��������"����!����� �����������������������������%����������&�������:U��4�=(')'()*((��,()(3)*((3
��# �#'��"�����������������������������#����������-���������!�����������������������.����������������������0��������!&�������!#����������%�������������N�"���� ���� ������������������&!!����!&���� ��������&��&��0����������� $������!����!�������������������=�(')(*)*((?�,')(')*(''
���� �������3�� ����������%�� �������%�*��3����C������������+�.����$��%������� ������=��K��6*((?�*(''7������!�������������!����!�������$����������.������������������������������������#��"���� ���������'()(>)*((?�,')'*)*('(
��*����- ���)���������������������-����������'���#������������������������.����������6�5������%���;;��:�A��AT�055 ��G������� �.�!��:�;4��A��: �4�5D&7�����������������������;��� �;I&�D������������ ��/:������.��5U�;��%�"&��&�D�������!������������;�� ��!�����4�F�����������������#� !� �������F��5������.�& ���4������5�����A�!:��%����;������A�����;�������.�������49����������%���L�� .����������P�9��.���5������2 ����.���@��5�. �������P���������. ��9������49��$���.���5D��������2 ����.���@��5�. ��������D �.���������49���;B������������ ����:��&��5��������/:� �4�����.����U���G; �4�4���;;��:�A������"���:���G���&�A� �4��4�����������;��:���/:� �4��;���G���5.������=�1��=�=��������� ���:;��.�%�"&���U�;;�& ���4����������� �5���.��#;G�U�:� �4�%�"&�����.�U�G��0�;� :��%�"&��%�5����T�V�4��/:� �4�4���;;��:�A��������.�� ��V�%�"&�� ��V���5�%�"&���D�����@��<���5��; �����%�"&��� ;����&�D�����������#�V�;���!��:�;4�������;� 5����4<�����;��P���������������� �.�"� F������;��4����%����4���� �� �.��;�� �4�4�5������:�A����#��%5D&������"�!������O�������;��4���<�A��=�=�=�D=� �4�����������F��.���D���������"�������������V�->�O��������F��.���D��������#�;;�44��.�;;I�5���V����%����4<��;��1���4��0�5���=��*((3�*('*
��� ������%������������������%6���������������������%���L����#���������� I�������!����L��= =*((��*((3
��� ������ �� ������+�����3������������%���������3��� �������������������%�� ����)��������3����������������������� ���N��* �����%N���������O�����������������%����� ������������<�����%����������� ������3�������B������������� � ���B�������8���9@��������������������%���L����#���������� I�������!����L��= =(')(+)*((3�,()(>)*(''
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
97
a� $6����������A�����<�������A�����5��.�������������������������������������
a� $6����������A�������������������������������.��������������92�������������������2����%�������5�����������]���9�����������
a� $6������ ��� �A����� �5������������ �%%9�<���� ������� ��� ���2����%�������5�����������]���9�����������
a� $6���������������8�=2�������%���������5������������������������
a� $6������2����5��A��������2��.����������9��.�������������,��98��������������������
a� $6���������6�����2���2��.����������������2�������������,��98��������������������
a� �����������������:������������������������,��8���������������9��������.�����������������������;�.�������������;��6����������A��������6���1�����5�����F��,6���������0�����H����������������I�
��Métodos de cálculo hidrodinámico de embarcaciones en diversos es-tados de mar.
��Métodos de cálculo estructural de barcos con materiales compuestos ��������������<��� ����������������J ���������
��Métodos de cálculo de estructuras off-shore teniendo en cuenta efec-�� ����������������J ���������
��Métodos de Diseño optimo de formas y estructuras en barcos.
��Métodos para análisis de problemas medio-ambientales en Ingeniería naval y marina.
��Sistemas de apoyo a la decisión en Ingeniería naval y marina combi-nando redes de sensores, bases de datos, métodos de cálculo y técni-�� ������%������������Z�� �������� \�
�� Numerical methods for hydrodynamic analysis of vessels.
�� Finite element methods for analysis of composite materials and structures in ships accounting for fluid-structure interaction effects.
�� Numerical methods for analysis of off-shore constructions accounting for fluid-structure interaction effects.
�� Numerical methods for environmental problems in naval and marine engineering.
�� Optimum shape design methods for ships
�� Numerical methods for multidisciplinary problems in naval and marine engineering.
�� Development of decision support system in naval and marine engineering, integrating wireless sensor networks, data bases, computer simulation methods and AI technology (neuronal networks).
��#�Y�#������3�#�$��#��� ��S D��5#KK�INGENIERÍA NAVAL Y MARINA PROYECTOS DE I+D+iNAVAL AND MARINE ENGINEERING RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
1���# �1�����'����'��������������'����� ��'��+��� ����#��'����������-�������������������������.�����������������������������F�;�����;������=�=�=')(3)*((3��*?)(*)*(',
��!�� ������%�� ���������������)����*����3�� ���������� ��,���� �����������������������������������%������'����)�����������������������������������'��������� ������=��K��6*((?�*(''7��������������!����������������������#����L��.��������"�2 ;��%����������������� ���������')(')*((3���,')'*)*(''
��"#�6��#-��� ���,��#������������#���"������2���#���-�*1�!�������2�2��!�!����!�2*#�#�,���2���"���2"�����I�����"�����#������!��"�����!����!��#���2�#�� ������=��K��6*((?�*(''7��������������!����������������������#����L��.���������0��� $���������������� ��!�!�����"�������������!�������������� �M������������=�')'()*((3���,')(,)*(''
��2"����� ���� ������%��������2��*+��%�����'��'��2��������$���������%�������'� ����"������������AH���A���F�;�������:�.�����������')(�)*((3���,')(+)*('(
)#*��$# ��,�"��#���2�$����*����$�#-��������-���D���!����"���$�������#*��$#����#-��2��������$�J�,�����!������,��������-�""�J�J�#������"������������AH���A���F�;�������:�.�����������')(>)*('(���,')(,)*('*
����2 ���%������������������'������*�������'�� �)����%����������%%������ �'�)�������� ����������%���� �)�'������8��,9�+���"��AH���A���F�;�������:�%;D�;�6���%7�.�����������*+)(>)*((?�*>)(>)*('*
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
99
a� $6����������������������2����������5��.��������������2����������2��
a� $6�����������������������2���7���5��2�������������;�������0��9��������%������������2��������%����
a� $6������2���2����������������R�������2���������������������
a� $6������2���������8��2�������2������������%�.��������2������9%�����������������������������������������2�A�����
a� $6������2�������������������2�������������������������������9�����
a� �����������������:��������������������������������������2�����9�������%�.�����������.�����������������������;�.�������������;��6����������A��������6���1�����5�����F��,6���������0�����H����������������I�
a� $6���������6�����2����5��A��������2�������������������2����������� ��� �������������2������������%�.�������� H2��.�����������9���A����I�
��Métodos de Simulación de procesos de embutición y estampación de chapa.
��$����� ����&�������������� �������������&���!� ����������y enfriamiento de piezas en fundición.
��Métodos para predecir la vida útil de productos industriales.
��Métodos para Diseño optimo de procesos de fabricación en la indus-trias del metal y del plástico.
��Métodos para Simulación de procesos de remachado y soldadura.
��Sistemas de apoyo en la decisión en la industria de procesos de fabri-cación combinando redes de sensores, bases de datos, métodos de �'�������������� ������%������������Z�� �������� \�
��Métodos numéricos para análisis de procesos multidisciplinareas en la industria de procesos de fabricación (problemas termo-mecánicos).
�� Finite element method for analysis of sheet stamping processes.
�� Finite element methods for analysis of mould filling, solidification and cooling in casting processes.
�� Numerical methods for life predictions of manufactured parts.
�� Optimum design methods for manufacturing processes in metal and plastic industry.
�� Finite element methods for simulation of welding and riveting processes.
�� Decision support systems in forming and manufacturing industries integrating wireless sensor networks, databases, computer simulation methods and AI technology (neuronal networks).
�� Numerical methods for multidisciplinary problems in the manufacturing industry.
�� ������E�P�# � #dPROCESOS DE FABRICACIÓN MANUFACTURING PROCESSES
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
#*����"�� �!���������� �����)���#��*�����7��� ������"���3�� ����������� ����+������3��������������3�� �����%�������%��3�� �� ������=��K��6*((?�*(''7����!$�������!�������������!�����!�������$����������.������N���!��&����������������������������������')(3)*((3���,')'*)*(''
,���#�" ����� ��� ��,��+��� � � ������'����%������ ����%�����3�� ����������� ����+������3������ �������3�����5����� ������=��K��6*((?�*(''7����!$�������!�������������!����!�������$�����������.������N���!��&�������������������� ��!�!')'()*('(���,()(3)*(''
$�J��# ����)���'����%������� ����%�����3�����������%�.�������������� ����� � ��������������3�� ���������� ��K��6*((>�*((-7�����!���������������L��$������������������������������������ ��������=�=(')(')*((-�,')'*)*((3
,�!� �,������������������������+����%����������������'�!��������������������������� ������������������������������.������#� #���������������������������!������������ !���&!����� ����$�������!!���!������/1 �����#=0�� ����&��!����!����������!��&�����������������������#����� �!=�!����������%�����!�(')(3)*((+�,')(?)*((3�
"�#�1�� ��� �����"��'�����'����� ���'�1����������������� ���.�F�;�5�����������������������.���������%�����������������!���"������������!�!�������������)�������0!&�����������%������ �!��=��� �����"����!� ����#=���!� ����%�����"��������%����0�� ���!&� ����#=(')'()*((��,()(3)*('(�
����� ���%�����3��%�����7������������� ���4�� ��������%� ���������%���B����� ���������� ��K��6*((>�*((-7�����!���������������L��$���������.������������������������ �"���(')'()*((��,()(3)*((3�
$�J ���%�����3����%B����� ��������*��� ����� � ����%� ������+��� ������������3��8$���������������J�� ���96���%�*��������%�����������$���������������J�� ����8$�J9��������� ���������� ��K��6*((>�*((-7�����!���������������L��$���������.�����������(')'()*((-�,()(3)*('(
#����-�2 ��� ����� ���5������#��*%�%��5����6������� ���������%����3�� ���'���������.������N���!��&*3)(�)*((-�,')(,)*((3
�����#��� ����� ����� ���4�� �����%���*���� ���%��5�������+������� ��+��� �����������������#��������������!�����!���������������L��$�������������������������������0��������6����7(')(')*((-�,')'*)*((3
���� ��������%��������'������*����������������� ������=��K��6*((?�*(''7�����!�������������!�����!�������$����������.������%�������!� ���������������������!�������(')(')*((?�,')'*)*(''
���2�� ���������3�� ��#�������������*��%�.���3�� ��������������� ����� ���3��%� ����� ���%�����3�������� ��� �������� ���� �����5%������ ������ � ������C������ ������=��K��6*((?�*(''7�����!�������������!�����!�������$����������.������N �����:��������������V��;��.���<�����������'()(>)*((?�,')'*)*((3
���$"�J ���%�����3� ������������ ��(�����%���������O����%���3������������������N���!��&����$���������(3)(+)*((?�(3)(+)*('(
��"#� ������������������#��������������-����������!�����������������������.���������F=�"�5��4:�5�6�07���������������%���������"�����������;;���<������;�5�����������-��:������������*((?�*('(
�������# �-���������������������7�D���������+�����������6� ������=��K��6*((?�*(''7�����!����������������������#�������.�������N�!����N���� =��N�����������������F���������5�� ; ;;��%����!����N���� =���N������F���������5�� ; ;;���; D����:�������� ��� �V�.����4 �.�.�6�/����7���������������.����F����4������!���;4����������� ��.����; .���;������������������;�.������.�.��5D�����;�.�;������� ��.����; .���;�����������.���@��;4����5D�����;�������� ��.��������������.����4��<�;�����F���.�.�.��1��4V��6���)�17��������!�!���� �����������!�"�� ��!�&��������� ��!�!����.�������:�;4�����!� �!���� �������������� �!�M��!�P�.������5D�;��=�=*()(+)*((?�,')'*)*((3
$"�:$�� �!�)����%���������(�&�+���%��������������������������'���������������� ����������%��������������������%��� ���������)�'����������������������������������.������������������������������!���%!����%��������!�������!���!����������:�������������/!&��"���������������������������������;���:�������"�4�.����������� �����������.�����:��N �����:���5���:��� �4P���������:������������/!&��"����������������(')(3)*((��,')(?)*((3�
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
101
��,� ������%������������������.���3�� �����+�� �� ��)�4� �������,����������� ��� ��� �����������������������D������%��� �������%���3�������5/�������������� ������=��K��6*((?�*(''7����!$�������!�������������!�����!�������$����������.������#�����;�����������������������')(-)*((3���,')'*)*(''
�2�1�*�P �����������������������������+�� ���%����������������� �A������������� ��%��������������������*((?�*(''
2�*$��! �!������%���������%����*���������)����%���������'����� �������������� �����6�����������������������=*((?�*(''
��!���� ���!�������������� ��� �������� ���������������������������������������'��������������������������������������.�������� ���������������������&��������"����!���� �����������������������������%�������&������:U��4�����������%��������(')'()*((��,()(3)*((3�
a� ��������2����������6���������6�����2��� �� ��� ���������� ���2�����:��������A���������2����������� ��� ���R���������������9�������5���������
a� ��A����;��2�����:��������A������������������2������������@
9���������:������6�����
9� ��������:����
9� ��������������62���
9� ��,������
9�D������,��������,����
a� ��������2�������5�������������������5��%�������;�%�����������A������������2�����������������5��,��8������5���������
��Desarrollo de métodos numéricos para la Simulación y optimización dinámica de procesos de la industria de conservación de alimentos.
��Análisis, optimización dinámica y control de procesos tales como:
- Esterilización térmica
- Pasteurización
- Procesamiento aséptico
- Congelación
- Tecnologías emergentes
��Desarrollo de un entorno virtual de información, formación y cálculo remoto para la industria de Ingeniería de alimentos.
�� Development of numerical techniques for the simulation and dynamic optimisation of food preservation processes.
�� Analysis, dynamic optimisation and control of processes such as:
- Thermal sterilisation
- Pasteurisation
- Aseptic processing
- Freezing
- Emerging technologies
�� Development of a virtual environment for information, e-learning and web computing in the food engineering industry.
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
��#�Y�#��5�3#$�D�INGENIERÍA DE ALIMENTOSFOOD ENGINEERING
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
�-��� ���������� �������*��������-����'�%�����%��� ���������� �����*��'�����'�%�D�%�+������ ������������)����%������-�����!�����2������������������������.������������=�= =�6"��7')(,)*('(��*?)(*)*(',
����Q�� ����������)��� )���� ��*�����'������� �������/����������0���������������������������.�������:�;����&��;�:���')(�)*((3��,()(3)*('*
����Q�� �#�������7��������%5�������)��.� ������������������ ��������� �� ������=��K��6*((?�*(''7����!$�������!�������������!�����!��������$����������.������� ����!��������������#�����.�;49���;9������=�=����"�!�0����&���=��!=����������������������')(+)*((3���*?)(*)*(''
#�������7��������%5�������)��.� ������������������ ��������� �� ������=��K��6*((?�*(''7�����!�������������!�����!��������$����������.������� ����!��������������#�����.�;49���;9������=�=����"�!�0����&���=��!=���������������������*,)(,)*((3���,')'*)*('(
a� ��������2������ � ��� �6���������6�����2�������������:������������9�����������2��.���������.�����A9��������5��,��8�����.���6�����
a� ���������� ���� ���2��������� ���������������������������
a� ������������$��A�������������
a� ������]�������A������� ������,���������������6�����
a� ������ ��� ���$��A����� ���� �������������,���
a� �����������������:������������������������,��8�����.���6�����
��Desarrollo de métodos numéricos para la modelización y Simulación de problemas de biomecánica e Ingeniería biomédica.
��Simulación del comportamiento del sis-tema cardiovascular.
��Estudio de la mecánica del corazón
��� �����������'&����� ��� ��%����venas y arterias.
��Estudio de la mecánica del sistema uro-lógico.
��Sistemas de apoyo a la decisión en Inge-niería biomédica.
�� Development of numerical methods for modelling and simulation of biomechanical and bio-medical engineering problems.
�� Simulation of the mechanics of the cardiovascular system.
�� Study of the mechanics of the urology system.
�� Fluid-dynamic analysis of the blood flow in vessels.
�� Decision support system in bio-medical engineering.
�� Study of the heart mechanics.
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
��#�Y�#��P#�$c# �INGENIERIA BIOMÉDICABIO-MEDICAL ENGINEERING
INVESTIGACIÓ SECTORIAL / INVESTIGACIÓN SECTORIAL / SECTORIAL RTD
103
RIAL R
&!�"�� ��&������������2�+������ �2������������!�������������� �1���*�����!���+������2���������� �-�� �����+�������'����'���%����)���������)���� ��%�����������������%���������������R��������-�������������������������.�����������')(,)*((3��*3)(*)*('*
��"�*#!# ������)��������)��.� �� ����������� ��)��������+�0�� �%�� ����+���#!#� ������=��K��6*((?�*(''7����!$�������!�������������!�����!��������$����������.�������!���!��� �������������������&���!����!�#��!��&�� �%�����������')(�)*((3���,')'*)*('(
�����*��#�" ���������������.���3�� ������S!S�� ��������� ��������������"������%B����D�����D��'��������������� ������=��K��6*((?�*(''7���������������!����������������������#���L��.�����������')'()*((3���')'()*(''
��#�� �������������������"�����������T����� �������������-����������!�����������������������.��������������������������1���!�%��������&�/����"����"0������� !�����/��"�����/������ �� �;��(')(>)*((?�,')(,)*('*
��#�1 �������3�� ������������ ����%�*������3��������������%�� �������%�*��3���������������������������%������+�.����$��%������6� ���������� ��K��6*((>�*((-7������!�������������!�����!��������$��������������������������������#����P ����5����.I��F����(')(')*((-�,')(+)*('(
a� ��������2������ ��� ������� �� ��9������� ���������������9�,����2����������������������2�����������������9����
a� ��A����� ���������:��������������������,���� �� �������������������� ���������,�����
a� #������,����� ��� ��� ���A����� �������������0�����������4��B��������9�������������9�,��������������
a� #������,����� ���� ����� 0������� �� ��9����� ����6���� �� ���� ���2����������������������0���������������������������������������
��Desarrollo de modelos y herramientas de Simulación multi-agente para simulacio-nes de tipo social y económico.
��Investigación de la dinámica de los mer-���� �������� �&����� &������ �multi-agente realistas.
��Análisis y modelación de redes de nego-cio y cadenas de valor en el sector digital.
��#�Q �%��������� %�������������Q��sistémico y del comportamiento de los &���� �������� ���Q��������������-trol de riesgo.
�� Development of multi-agent simulation models and tools for social and economic simulation
�� Analysis and modelling of business actor networks and value chains in the digital sector
�� Research into financial market dynamics using realistic multi-agent simulations
�� Research in system-level financial risks and counterperformativity of financial valuation and risk models
���������! ��� � �PROYECTOS DE I+D+I / RTD PROJECTS
$�3���� #�3��#� ���$# �MODELOS SOCIALES Y ECONÓMICOSSOCIAL AND ECONOMIC MODELS
���� $��������������"&'(�)*"*ESTADÍSTICAS DE PROYECTOS 1987-2010
PROJECT STATISTICS 1987-2010
�f���� ��4������9���8�O�Nº de Proyectos - año / Number of projects - year
��4����������������O�Proyectos nacionales / National projects
����������.���2������O�Convenios con empresas / Contracts with industry
$���������g�9���8�O�Miles de € - año / Thousands of € - year
105
�f���� ��4����������E +O��8Nº de Proyectos del FP7/añoNumber of projects on FP7/year
����������������������������� ���������
PROYECTOS EN PROGRAMAS DE LA COMISIÓN EUROPEA
PROJECTS IN EC PROGRAMMES
$���������g����2��4����������E +O��8Miles de € en proyectos del FP7OañoThousands of € in FP7 projects/year
$���������g�9�2��,�����O�Miles de € - programa / Thousands of € - program
* informació a/ Información al / Information up to: 31.12.2010
Productes CIMNEProductos CIMNE
CIMNE products
PRE AND POST-PROCESSING SOFTWARE
SIMULATION SOFTWARE
DDDDDDDDEEEEEECCCCCCCCIIIIISSSSSSSIIIIOOOOONNNNN SSSSSUUUUPPORT SYSTEMS
MMMMMMMAAAAAAANNNNNNNAAAAAAAGGGGGEEEEEEEEMMMMMMMEEEEENNNNNNNTTTTTTTTT &&&&&&&& CCCCCCOOOOOLLLLLLABORATIVE WORK PLATFORM
EEEEEEEEEEEEEENNNNNNNNNNNNNNNGGGGGGGGGGGGGGGGIIIIIIIIIIIINNNNNNNNNNNNNNNEEEEEEEEEEEEEEEEEEEEEEEEEEEEEERRRRRRRRRRRRRIIIIIIIIIIIINNNNNNNNNNNNNNNGGGGGGGGGGGGGGGGG SSSSSSSSSSSSSSSSSYYYYYYYYYYYYYYYYYSSSSSSSSSSSSSSTTTTTTTTTTTTTTTTEEEEEEEEEEEEEEEEMMMMMMMMMMMMMMMMMMMSSSSSSSSSSSSSSS AAAAAAAAAAANNNNNNNNNNNNNNNDDDDDDDDD HHHHHHHHHAAAAAAAAAAARRRRRRRRDDDDDDDWWWWAAAAAARRRREEEE
107
GID
A universal and adaptive pre and pos-tprocessor for computer simulation in engineering and applied science. Developed and marketed by CIMNE since 1998
DIPPO
Digital image processing platform.Developed by CIMNEManufa
MANUFACTURING PROCESSES
STAMPACK
Sheet metal forming processes. Developed by Quantech ATZ, SA. in cooperation with CIMNE.Marketed by Quantech ATZ, SA since 1999
VULCAN
Casting and foundry processes. Developed by Quantech ATZ, SA. in cooperation with CIMNE.Marketed by Quantech ATZ, SA since 2001
WELDPACK
Welding processes.Developed by CIMNE
FLUID DYNAMICS
TDYN
Fluid dynamics and multiphysics. Developed by Compass Ingeniería y Sis-temas, SA. in cooperation with CIMNE.Marketed by Compass since 2003
STRUCTURAL ENGINEERING
RAMSERIES
Analysis of solids and structures. Developed by Compass Ingeniería y Sis-temas, SA. in cooperation with CIMNE.Marketed by Compass since 2003
DEMPACK
Multifracturing processes in geomecha-nics and industrial problems.Developed by CIMNE
PRE AND POST-PROCESSING SOFTWARE
E���������C�������1������<�������������������� ���� 1��� ��,������ ��� ������ 1���������1������������������������2�����9��������2���������������2���1�������������9������������������������2���������
Es excepudi od magnihi lluptat ma que ipis-si volorae. Itamusciis dolutem ostrume nde-mperi quiatet evelest ut di odis et ipsuntiis nienes unt ut proris adi solore ea dolorepro eatempo rempori orenima gnimolum faccu-me molo essi denihil igentibus.
Tem faccus, con cus duntiosa et pra volut quatures sequo commolorit vo-lores es everion sequiscium autam qui num at eatatur sedis et et fugitae-pudae peliciam quatem harchil mos-sus, ut quatia niet lam.
SIMULATION SOFTWARE
SIMBAD PLAYAS
Sistema de información sobre ocio, turismo y medio ambiente en playas.Developed by CIMNE
SIE
Information system for management of energy consumption in public buildings and municipalities. Developed by CIMNEMarketed by Gasó Auditores SL and CIM-NE since 2005
FLOOD
?������� ������� ��������������#Developed by CIMNE
ROBOCOPT
Interpolated platform for robust opti-mization in engineering.Developed by CIMNE
ROEM
Information system for assessment of the environmental quality in reservoirs and lakes.Developed by CIMNE
RAMFLOOD
Decision support system (DSS) for risk ����������������������������#Developed by CIMNE
GIS+
Web-based interactive Geographic Information System.Developed by CIMNE and Applus
ETESTING
Web-based platform for e-management of experimental tests. Developed by CIMNE and Applus
WSNP
An integrated platform for e-moni-toring using wireless sensor network technology.Developed by CIMNE
DECISION SUPPORT SYSTEMS
109
INTERSPACE
Aplicación Web totalmente personalizable que permite crear comunidades virtuales donde los usuarios pueden comunicarse, compartir información y trabajar en colabo-ración.
MI COLEGIO EN RED (MCR)
Mi Colegio en Red. Sistema integrado para gestión de las comunicaciones y servicios en un colegio vía internet.
INFLATABLE STRUCTURES
J������ ���%� ������!� �������������for a wide.Developed in cooperation with Building Ingenieria y Arquitectura SL and Tensairity Structures SL.
MANAGEMENT & COLLABORATIVE WORK PLATFORM
ENGINEERING SYSTEMS AND HARDWARE
Innovació i transferència de tecnologiaInnovación y transferencia de tecnología
Innovation and technology transfer
COMPASS ENGINYERIA I SISTEMES, S.A.
STRUCTURALIA S.A A.
INGENIA AIE
111
����� ��������������������������� � ��� ������ ���EMPRESAS CREADAS CON PARTICIPACIÓN DE CIMNECREATION OF COMPANIES PROMOTED BY CIMNE
������ ��� ���� �� � �����+�+� 3G�.4������ ��� �$ ���� 7�����������2��� ����������� �������������� �GA�.��� ��� �G�2�������� ����6���������6����������,��8����;���.���2������6�%������������5��,��8������������������������/������ �$ �����%���������9����������G��,��8���������%�J���\�,�������� ������������ ��� 2��4������ ����K\���%�J���� ��2�������:��� 2��� ��� ������8���� ��,��8����\� ���������2������� ��92�������:����������������%���������
COMPASS INGENIERÍA Y SISTEMAS, S.A.El objeto de COMPASS es desa-rrollar actividades comerciales en el ámbito de la aplicación de métodos numéricos en in geniería, con especial énfasis en las ingenierías civil, naval y marítima. COMPASS ofrece consultoría de ingeniería y software; gestión y co-ordinación de proyectos de I+D; soft-ware especializado para el Diseño en ingeniería; desarrollos especializados y cursos de formación.
COMPASS INGENIERÍA Y SISTEMA S.A. The objective of COMPASS is to develop commercial activities in the application of numerical methods in engineering, with emphasis on civil, naval and maritime engineering. COMPASS offers design and analysis services in engineering, project management, specialized software systems for engineering design, innovative developments in engineering and advanced training courses.
���� ���� �������� ��� ������� ������� ���������� ���+�+��1���������������<���������������2������������2������������������GA�.���������%������������������������������,��98������������G���0�������������������
Soluciones Integrales de formación y Gestión Structuralia S.A. Sociedad creada para desarrollar actividades en el ámbito de la formación y la consul-���������%������Q������������Q���internet.
Soluciones Integrales de formación y Gestión Structuralia S.A. The objective of this company (commercially known as STRUCTURALIA.) is to develop training and consulting activities in civil engineering and building cons truction via Internet.
���� �� � �� 7�� ��� ,��2� ��� ��9���6�� ��������� %������ 2��� �"� ��92�������� #$������.4����������#�9��#�����2�����������2������2���������� ����� � ���.���� ��� 2��4������������������ ������ ���2������A����� ������ ��2��� ��� ���F��.������� ��.� ����%�.�������� ���� ������� �� ������� �����9���������� #���#�� ���A� ���2��9��� 2��@� #�$;� ������ �,��8����;� ��D��<;� ��2���;� #������,�;� ��#;��P��$;�h������<;� #$9��;� �22���;� �M�X��� #.7����;� ��;� #$���
INGENIA AIE es una agrupación de in-terés económico formada por 12 em-presas y CIMNE. El objetivo de INGENIA es promover la participación de sus miembros en proyectos industriales en el campo aeronáutico y espacial en colaboración con los fabricantes del sector a nivel internacional. INGE-NIA esta compuesta por: IDOM, Solid Enginyeria, CadTech, Compass, ItalDe-sign, CGSI, ABGAM, Quantech, CIMSA, Applus, Rücker Ibérica, EdV, CIMNE.
INGENIA AIE, is a Group of Economic Interest formed by 12 enterprises and CIMNE. The objective of INGENIA is to promote the participation of its members in projects of industrial size in the aeronautics and space field in cooperation with the main international manufacturers in the sector. The partners in INGENIA are: Serra Aeronautics, IDOM, Solid Enginye ria, CadTech, Compass, ItalDesign, CGSI, ABGAM, Quantech, CIMSA, Applus, Rücker Ibérica, EdV, CIMNE.
www.cimne.com/websasp/ingenia2/ www.compassis.com www.structuralia.com
Notes de premsaNotas de prensa
Press releases
113
El Cartell, 15/10/2010
����� ��,�� ������� ���- "* )**&
� ���.�/�����#� ���0�� ������ ������ �� ���1������#� � 2
Recuperar los créditos que ha conce-dido el Gobierno para la investigación y el desarrollo es una tarea complicada. “El Estado está dando créditos a la univer-sidad o a centros de investigación para I+D, pero va a ser complicado que los devuelvan. Se les aplazará la deuda, pero en el fondo lo que se está haciendo es �� �=��� ������§���°� �����������%��-ta a NEGOCIO Eugenio Oñate, director general del Centro Internacional de Mé-todos Numéricos en Ingeniería (Cimne).
El centro acumula ya una amplia expe-riencia en investigación. En la actualidad, cuenta con 100 proyectos en marcha y trabaja en los principales mercados mun-diales como son Estados Unidos y China.
El problema de España es que no ha encontrado el equilibrio entre la inves-tigación básica y la competitiva como ha logrado Estados Unidos. “La investi-gación básica requiere un periodo muy largo. Es imposible recuperar el crédito en 10 años. Todos los que investigamos soñamos con emular a Microsoft, pero no siempre este es posible. Todos nos hemos puesto las pilas, pero es obligato-rio pasar por esta primera etapa”.
Cimne ha logrado ya alcanzar un equi-librio. En el último año, el centro ha lo-grado ingresar 8,2 millones de euros, de los que un 95% lo reinvertirá en nuevos proyectos de investigación. En los próxi-mos tres años, confían en ampliar su pre-supuesto un 5% en cada ejercicio.
Además, ya ha contribuido con la crea-ción de tres empresas: Structuralia, que ha logrado una facturación en el último año de seis millones de euros; Compass, que ingresó 700.000 euros, e Ingenia, que logró 2000 euros.
Oñate destacó que han encontrado una gran oportunidad en Estados Uni-dos: “Hemos observado que en Europa se han reducido los proyectos en I+D, por lo que estamos intentando compe-tir en Estados Unidos y Asia. Con el Plan Estímulo de Obama se han inyectado 800.000 millones de dólares. Además, los centros en estos países tienen más ca-pacidad de decisión”. Recientemente, ha logrado contratos del Banco Mundial, del Banco Interamericano para el Desarrollo >��� �'�������J�%�����������%� #
El director general de Cimne insistió también que la combinación de hardware y software con métodos numéricos es el futuro de la investigación: “Por ejemplo, uno de nuestros proyectos es una polea de barco para medir el viento”.
��� ��)* "* )*"*
���������� ������������ ����� �������������
�� ������� ���2��� ��� �������� <������,������������'"+������������
������2��������������������������������
La tercera convocatòria dels premis del Consell Europeu de Recerca (CER) destinada als joves investigadors –els denominats Starting Grant– ha tornat a distingir la ciència que es fa a Catalunya. Així, 10 dels 427 ajuts econòmics donats a conèixer ahir corresponen a investiga-dors que treballen en centres de recerca catalans. En el conjunt de l’Estat espanyol, el CER ha concedit 23 Starting Grant (una de les distincions correspon un in-vestigador que treballa a la Universitat de Navarra i l’IESE).
Els premis del CER es concedeixen a partir de la selecció realitzada per un ��������������� ������������$��%�-lora les propostes més innovadores i els investigadors amb més talent. L’apartat ������� � � ��%�� ��������� !� �����-tit aquest any un total de 580 milions
�²��������������������³��� ����������que porten a terme els guardonats.
En les dues edicions anteriors, el CER havia concedit 26 Starting Grant a in-vestigadors de Catalunya. Els premiats aquest any són Guillem Aromí (UB), Santiago Badia (CIMNE), Fernando Bro-ner (CREI), Fabrizio Ferraro (UN-IESE), Nezih Guner (Consorci Markets), Núria López (ICIQ), Tomas Marques (UPF), Ro-main Quidant (ICF), Victòria Reyes-Gar-cia (UAB) i Salvador Soto-Faraco (UPF).
��������"- "" )*"*
���� �� ������ ������������� ���� �������3��
�,����� �Z���� ����.�� ��� $������������9��J���������������������#����9������������$��[����� ��2���������
Eugenio Oñate, director del Centro Internacional de Métodos Numéricos en Ingeniería (CIMNE, en Barcelona) ha sido distinguido con la Medalla Gauss-Newton de la Asociación Internacional de Mecánica Computacional (IACM, en sus siglas inglesas) por sus contribucio-nes en el ámbito de la mecánica com-putacional. Oñate ha recibido el premio en el congreso mundial de la dicha aso-ciación, celebrado en Sidney (Australia). “El galardón demuestra que nuestro país cuenta con profesionales y centros com-petitivos a nivel mundial con capacidad de liderazgo en el ámbito de los méto-dos numéricos y sus múltiples aplicacio-nes en las ingenierías civil, aeronáutica, espacial, naval, biomédica y eléctrica”, ha declarado el director del CIMNE tras re-cibir la medalla.
El CIMNE fue fundado por Oñate, in-geniero de Caminos, Canales y Puertos, en 1987, junto con otros profesores de la Universidad Politécnica de Cataluña, como organismo autónomo de investi-gación especializado en el desarrollo de métodos de cálculo para resolver pro-blemas multidisciplinares en ingeniería.
115
El centro ha participado en más de un millar de proyectos de investigación pú-blicos y privados.
La Medalla Gauss-Newton, la máxima distinción de la IACM, premia a perso-nas que han hecho contribuciones des-tacadas, constantes y prolongadas en el campo de la mecánica computacional. Los galardonados reciben una medalla de bronce con las imágenes de Newton y de Gauss en reconocimiento de la si-nergia entre las matemáticas, el análisis numérico y la modelización matemática de fenómenos físicos.
����������� ���"* "" )*"*
������ ���������������������������������� �������������������� ���
�� 2���������� P����X� �.���� ����������2��8��������������/0�������� �����2����������:�����2��������
Una delegación del departamento de Seguridad Nacional de Estados Unidos ha visitado durante dos días el Centre Internacional de Mètodes Numèrics en Enginyeria (Cimne), ubicado en el Cam-pus Nord de la Universitat Politècnica (UPC), para iniciar un proyecto de inves-tigación sobre seguridad aérea. Su obje-tivo: determinar qué puede ocurrir si un pasajero hace estallar un explosivo en la cabina de un avión durante un vuelo.
"Se trata de ver qué daños puede cau-sar la explosión según la potencia de la
bomba y el lugar del avión donde estalle para ver, por ejemplo, si el fuselaje resis-tirá", explicó ayer Eugenio Oñate, direc-tor general del Cimne y catedrático de la UPC. "No es lo mismo que estalle en el interior del lavabo que en el comparti-mento de equipajes o junto a una venta-na". Como en otras investigaciones basa-das en modelos numéricos, predecir con precisión qué puede ocurrir debe servir para tomar decisiones basadas en las ma-temáticas, más que en las especulaciones.
La delegación estadounidense que visi-tó el Cimne en octubre estaba formada por cuatro personas del departamento de Seguridad Nacional y otras tres del Laboratorio Nacional de Investigación (NRL). El proyecto prevé que el Cimne y el NRL desarrollen conjuntamente la ��%�����������$������������������� departamento de Seguridad Nacional.
La iniciativa de Estados Unidos ilustra hasta qué punto el Cimne está reco-nocido como un centro de referencia mundial en estudios numéricos de fenó-menos complejos como, en este caso, el impacto de una explosión sobre la es-tructura de un avión. Creado en 1987, el Cimne cuenta con delegaciones en Washington (EE.UU.), Santa Fe (Argen-tina) y Singapur. Además, ha abierto aulas de formación de especialistas en méto-dos numéricos en diez países. "Aunque somos un organismo de investigación sin ánimo de lucro, funcionamos como una
multinacional", explica Eugenio Oñate. Gracias a la delegación abierta en Was-hington, el Cimne ya ha colaborado con el NRL en trabajos anteriores. El éxito de la colaboración hasta ahora explica que, en el momento de iniciar un nuevo proyecto sobre seguridad aérea, el NRL y el departamento de Seguridad Nacio-nal hayan propuesto al Cimne tener un papel destacado en la investigación.
¦`���� ������� �� � �� �� ��������pero el proyecto aún no está cerrado”, advierte Oñate. Si sale adelante, “prevemos que trabajen en esta investigación unas diez personas de la sede de Barcelona más el equipo de la delegación de Washington”.
El análisis de una explosión en la cabina de un avión durante un vuelo es un caso ejemplar de problema que puede estu-diarse con los métodos que ha desarro-llado el Cimne. “Reúne los tres requisitos básicos para que podamos analizarlo”, �}� ��� '°���# \������� �� ����������conocen bien la física del problema, tan-to de la explosión como de la estructura del avión. Después, saben expresar este problema en forma de ecuaciones mate-�������#~��� �������������������-jar con ordenadores los complejos cál-culos que se derivan de estas ecuaciones.
Además, muchas de las variables fí-sicas que intervienen en el problema !�� ���� ���������� ����� ��� �������-cos del Cimne en otros proyectos. Así, han participado en cuarenta proyectos europeos de investigación aeronáutica. El propio Oñate es especialista en de-formaciones de chapa, campo de inves-tigación que abarca desde la producción de latas de refresco delgadas y ligeras hasta la deformación del fuselaje de los aviones. Y decenas de otros proyectos del Cimne han abordado problemas de ����������������$��������������inundaciones hasta explosiones.Josep Corbella
11111111111111111111 555
Centro Internacional de Métodos Numéricos en Ingeniería
International Center for Numerical Methods in Engineering
Centre Internacional de Mètodes Numèrics en l’Enginyeria
����������� ���������������������������������������!���������"�#�!$��%���&�'��(�)�*�+,�-$�%���&�'�����+)*�& ��!.��� ��/�� ��$���$���www.cimne.com