MEDLEY INGRADE (MIG) - Insight Lighting

-MIG HO UNV-- - - - -AS-

DIMENSIONS

PERFORMANCE SUMMARY

RGBWq, HO, 48.00"

10° X 10° 2831 28814

10° X 60°

20° X 60°

2545

2734

8024

6147

20° X 20°

40° X 40°

3027

3004

16233

4282

40° X 60°

60° X 60°

2693

2678

2645

2172

LUMENS PEAK CANDELA

ACCESSORIES / OP TIONS

WHITE DIFFUSE LENS (WDL)

PEDESTRIAN GLARE SHIELD (PGS)

ANTI-SLIP LENS (ASL) INTEGRATED HEX LOUVER (IHL)

6.00”

4.88”

9.88”

12”, 24”, 36”, 48”(NOMINAL)

5.75”

LIGHT SOURCE

OPTICS

CCT

LUMEN MAINTENANCE

5-YEAR LIMITED

HOUSING

PAT.: US D836,815

POWER

CLEAR TEMPERED GLASS (8 MM)

WARRANTY

ETL AND cETL FOR WET LOCATION

IP68 (FOR IMMERSION UP TO 42" FOR 30 MINS

VOLTAGE

PERFORMANCE

LENS

OPERATING TEMP

EXTRUDED ALUMINUM

PATENTS

-20° C to 50° C

CONTROL

SILVER ANODIZED POWDER COAT FINISHFINISH

75,000 HRS L70

CERTIFICATION

HIGH OUTPUT (17.0 W/FT)

10°X10° TO 80°X80°, ASY

RGBW, RGBA, RGBL, AWH (KELVIN TUNABLE

INTEGRATED POWER SUPPLY

UP TO 28814 PEAK CANDELA

(KELVIN TUNABLE 27K-65K)

UNIVERSAL 120-277 V

DMX FIXTURE, SYSTEM, OR FT BY FT RESOLUTION

PROFILE

IK10 (WALK/DRIVE OVER COMPLIANT UP TO 5000 LBS)

IK09 IK10 IP66ANSI C136.3IP67 IP68 c h i c a g o

P L E N U M

OP TICS Not all available optics shown

10° X 10°

40° X 40°

10° X 60°

40° X 60°

10° X 90°

40° X 90°

20° X 20°

60° X 60°

20° X 60°

ASY

Black Linear4341 Fulcrum Way NE, Rio Rancho New Mexico 87144Revised 10/22/2021 Specifications subject to change without notice 1/6

P.: 505.345.0888 | insightlighting.com

Black Linear

MEDLEY INGRADE (MIG)IN GROUND PERFORMANCE LINEAR | COLOR CHANGING AND ACTIVE WHITE

PROJECT: TYPE: CAT. #:

6 VOLTAGEUNIVERSAL UNV

FIXTURE LENGTH

12"

24"

12

24

36" 36

48" 48

5

1 FIXTUREMEDLEY INGRADE MIG

8 FINISH

ANODIZED SILVER

WHITE DIFFUSE LENS

PEDESTRIAN GLARE SHIELD

2.5 DEGREE TILT

5 DEGREE TILT

ANTI-SLIP LENS

INTERNAL HONEYCOMBLOUVER

PLUG AND PLAYCONNECTION

AS

WLS

PGS

T2.5

T5

ASL

IHL

PNP

7 CONTROL OPTIONS

DMX FT BY FT RESOLUTION DMXFT

DMX FIXTURE RESOLUTION DMXFX

DMX SYSTEM RESOLUTION DMXSYDMX controls are required and must be ordered separatelyRequires a DMX Programming Kit see belowDefault factory programming setting is system resolution

For direct view applications

0° aiming is standard

0° aiming is standard

All fixtures are shipped from the factory with default channels 1-4

Available with 180° X 80° optics only

Tilt options must be done at the factory

Tilt options must be done at the factory

Please contact factory for factory pre-addressing and labeling of fixtures

Not available with Honeycomb Louver

Tilt is not recommended with Asymmetric Optics

Tilt is not recommended with Asymmetric Optics

Not available with Asymmetric optics

Not available with White Diffuse Lens

PNP option allows for continuous fixture connection and carry power & data from fixture to fixture

A T-Connector is provided (see page 5)

May require jumper cables

See below for details

Contact factory for plug and play option for 347V or 480V

2 WATTAGE

3 CCTRGBWq

RGBAq

RGBLq

RED, GREEN, BLUE, 40K

RED, GREEN, BLUE, AMBER

RED, GREEN, BLUE, LIME

17.0 W/FTHIGH OUTPUT HO

110-208V, 277VContact factory for 347V (black cable/flying lead only)

ASYMMETRIC is intended for a wall height of10.0 -12.0 FT

For best results a 24.00" setback is recommended

ASYMMETRIC ASYD


2 3 4 5 6 7 8 91

MIG HO UNV AS

9 OPTIONS

Separate options with dashes

SPECIFICATION

EXTERIOR LEADER CABLES Go to Cable Guide >

CONTROL & WIRING ORDER OP TIONS

DMX DISTRIBUTION & PROGRAMMING KIT - REQUIRED FOR DMX DIMMING

IN68 INGRADE J-BOX STARTER KIT

J-BOX STARTER KIT - OPTIONAL

Converts line voltage and data to Insight's cabling system within the concrete pour box

One Starter Kit per circuit or run

See page 3 for details

SK

DMX/RDM Distribution Kit (4 OUTPUTS) - IP67DMX/RDM DISTRIBUTION KIT consists four outputs

Each output is limited to (1) run per output - up to 32 fixtures max

Three terminators are included for end of line termination.

CDS-RDM

EXTERIOR BLACK JUMPER CABLES

25.0 FT BLACK LEADER CABLE LC-25-B

1.0 FT BLACK BLACK JUMPER CABLE JC-1-B

2.0 FT BLACK JUMPER CABLE JC-2-B



25.0 FT BLACK JUMPER CABLERequired if fixtures are not mounted in an end-to-end continuous manner and for line voltage only

Leaders and cables are not available with 347V or 480V

leaders and cables are not available with 347V or 480V

JC-25-B

Converts line voltage and data to Insight's cabling system outside of the concrete pour box (j-box by others)

A leader cable is not required if a J-box starter kit is ordered

See J-box Starter Kit below

One leader cable is required for stand alone fixtures and for the first fixture in a plug and play continuous run (32 fixtures maximum per run, circuit limitations my apply)

Go to DMX Guide >

ACTIVE WHITE AWHqkelvin tunable 27K-65K



Black Linear



4 OPTIC

10° X 60°

10° X 90°

1060

1090

20° X 20° 2020

20° X 60°

20° X 90°

2060

2090

40° X 40° 4040

40° X 60°

40° X 90°

4060

4090

60° X 60°

60° X 90°

6060

6090

80° X 80° 8080

10° X 10° 1010

https://insightlighting.com/download/cable-guide/


MAXIMUM FIXTURES PER CIRCUIT (CIRCUITS MAY NOT BE LOADED OVER 10 AMPS)

LOW OUTPUT (3.5 W/FT) MEDIUM OUTPUT (9.0 W/FT) HIGH OUTPUT (17.0 W/FT)

277V 277V 277V

396

791

154

308

81

163

120V 120V

171

343

35

71

120V

67

133

FIXTURE

24.00"

12.00"

264 103 54114 244436.00"

198 77 4186 183348.00"

PERFORMANCE

LOW OUTPUT (3.5 W/FT) MEDIUM OUTPUT (9.0 W/FT) HIGH OUTPUT (17.0 W/FT)

PEAKCANDELA

PEAKCANDELA

OPTIC LUMINAREEFFICACY

LUMINAREEFFICACY

LUMINAREEFFICACY

DELIVERED LUMENS

DELIVERED LUMENS

DELIVERED LUMENS

CCT AND LENGTH

RGBW 24.00"

RGBW36.00"

PEAKCANDELA

RGBW48.00"

10° X 10° 442441.3 LM/W435.0 LM 2157841.3 LM/W2123.0 LM1122141.3 LM/W1104.0 LM








14386

4020

8117

3080

2141

1324

1084

402








100° X 100° 82 23.8 LM/W167.0 LM 23.8 LM/W816.5 LM20923.8 LM/W425.0 LM






40° X 60° 54339.3 LM/W552.0 LM 2647 39.3 LM/W2694.0 LM137639.3 LM/W1401.0 LM



WIRING



Black Linear



QUAD CHIP

The quad array integrates multiple colors (i.e. red, green, blue, white) into a single location for immediate and superior color saturation. This is ideal for direct line of sight applications where the face of the fixture is visible, creating color consistency between the luminaire and the illuminated surface. LED color combinations may be customized to suit any application (i.e. royal blue, cyan, lime, white, etc.). Please contact the factory for special branding requirements.



Black Linear



DIMENSIONS

DIM A

LENGTH

14.38"6.38"

12"4"

26.38"

24"

38.38"

36"

50.38"

48"

CONDUIT (BY OTHERS)

JUMPER CABLE (MUST BE ORDERED SEPARATELY)

THREADED NIPPLE WITH LOCK NUTS (BY OTHERS)REQUIRED FOR HOUSING TO HOUSING ALIGNMENT

PLUG AND PL AY CONTINUOUS RUN CONFIGURATION WITH SPACING

PLUG AND PL AY CONTINUOUS END-TO-END RUN CONFIGURATION

Jumper cable required

Jumper cable NOT required

WIRING GUIDE WITH J-BOX STARTER KIT

6.00”

9.88” DIM A

4.88”

CONCRETEPOUR BOX OPTICAL

CHAMBER

DRIVER

ELECTRICALCONDUIT ACCESS

CONCRETEPOUR

CONCRETEPOUR

GRAVELGROUND GROUND

1.50” CONDUIT & FITTINGSREQUIRED FOR ALL CABLES(BY OTHERS)

AC & DC(BY OTHERS)

DATABELDEN 3105AEXTERIOR CABLE(BY OTHERS)

AC/DATA JUMPER

AC/DATA JUMPER

STARTER KIT J-BOX

T CONNECTOR

AC TO LUMINAIRE




Black Linear



MEDLEY INGRADE (MIG) - Insight Lighting

Documents

Transcript of MEDLEY INGRADE (MIG) - Insight Lighting