ME 322: Instrumentation Lecture 3

15
ME 322: Instrumentation Lecture 3 January 27, 2012 Professor Miles Greiner

description

ME 322: Instrumentation Lecture 3. January 27, 2012 Professor Miles Greiner. Normal Distribution. Population size N Sample size n < N. Normal Distribution. The probability the next sample is within:. Lab 2: Cost Estimates. - PowerPoint PPT Presentation

Transcript of ME 322: Instrumentation Lecture 3

Page 1: ME 322: Instrumentation Lecture 3

ME 322: InstrumentationLecture 3

January 27, 2012

Professor Miles Greiner

Page 2: ME 322: Instrumentation Lecture 3

Normal Distribution

• Population size N

• Sample size n < N

Page 3: ME 322: Instrumentation Lecture 3

Normal Distribution

• The probability the next sample is within:

Page 4: ME 322: Instrumentation Lecture 3

Lab 2: Cost Estimates

• What cost is greater than 90% of all current and future measurements?

Page 5: ME 322: Instrumentation Lecture 3

Example Problem: based of lab

Assume I measure the Quad and got a cost estimate of $963 and I know that the measurement process has led to a cost standard deviation of $323.

How much money should I add to be 90% sure that I’ve budgeted enough?

Page 6: ME 322: Instrumentation Lecture 3

Uncertainty

Take n samples of a population (n < N)

Expect: 1) & S from different samples will not be equal.

2) as n increases, expect variation between samples to be smaller.

Uncertainty un the population mean confidence interval.

Page 7: ME 322: Instrumentation Lecture 3

Confidence Level

• Confidence Level P– Probability that the true µ is within the confidence

interval.

• How to estimate δ for a given P

If N >30

Page 8: ME 322: Instrumentation Lecture 3

Confidence Level

If N >30 use student t

Page 9: ME 322: Instrumentation Lecture 3

Example 6.14 a

We would like to determine the confidence interval of the mean of a batch of resistors made using a certain process. Based on 36 readings, the average resistance is 25 Ω and the sample standard deviation is 0.5 Ω.

Page 10: ME 322: Instrumentation Lecture 3

Example 6.14 a

Page 11: ME 322: Instrumentation Lecture 3

Example 6.16

A manufacture of VCR systems would like to estimate the mean failure time of a VCR brand with 95% confidence. Six systems are tested to failure, and the following data )in ours of playing time) are obtained: 1250, 1320, 1542, 1464, 1275, and 1383.

If a 95% confidence interval of ± 120 h was found how many more must be tested to obtain a confidence interval of ± 50 h.

Page 12: ME 322: Instrumentation Lecture 3

Example 6.16

Page 13: ME 322: Instrumentation Lecture 3

Example 6.16

Page 14: ME 322: Instrumentation Lecture 3

Correlation Coefficient

Page 15: ME 322: Instrumentation Lecture 3

Correlation Coefficient