Matt Smith Spring Portfolio
-
Upload
msmith3591 -
Category
Documents
-
view
222 -
download
0
Transcript of Matt Smith Spring Portfolio
-
8/2/2019 Matt Smith Spring Portfolio
1/26
Matthew Smith | Industrial DesignerSpring 2012
-
8/2/2019 Matt Smith Spring Portfolio
2/26
Education.Third year at the University of Cincinnati
Majoring in Industrial Design
Attended Dublin Jerome High School 20052009
Graduated with Honors in 2009
Work Experience.Two quarters experience at Packaging Corporation of America
Contributed on two projects that went to production
Experience in concept sketches, renders, structural design
Lifeguard at Muireld Village Pool and Recreation facilities
Seasonally employed from 2006-2009
Water Safety Instructor at the Muirled Village Pool & Rec
Head instructor from 2007-2009
Industrial Design internship at Battelle Industries in 2008
Through Young Professionals Academy
Participated in brainstorming sessions
Developed independent project
Activities/Organizations .Member of IDSA
Member of Boy Scout Troop 117 since 2005
Member of the mens swim team for Dublin Jerome High School
Junior Varsity during the 2005/2006 and 2006/2007
Varsity during the 2007/2008 and 2008/2009 seasons
Computer Skills/Technical Skills.Adobe CS5.5, Vectorworks, Alias Automotive 2012, Solidworks,
Sketch Book Pro, Keyshot, Photoview 360, Wacom Tablets,
Sketching, Digital Rendering, Digital Sketching
Leadership Experience.Senior Patrol Leader for Boy Scout Troop 117 for six months
Headed a committee that organized weekly meetings
Planned and supervised montly outings
Team Captain of the varsity mens swim team for Dublin Jerome
Captain during the 2008/2009 season
Led the rst boys swim team to state championship in DJHS history
Honors and Qualifcations.Attained Eagle Scout rank
Organized and carried out a 150 hour service project
Earned 21 merit badges including First Aid, Wilderness Survival, and
Emergency Preparedness
Member of Order of the Arrow
Elected by fellow scouts in Troop 117
Completed the Order of the Arrow Ordeal
Matthew Smith
Email and Phone:
(614) 535.8590
Current Address:
362M Probasco St.
Cincinnati OH 45219
Permanent Address:
8830 Tayport Drive
Dublin, OH 43017
http://www.uc.edu/webapps/propractice/industrialportfolios/smith_matt_14.pdf
Page 2 of 27
Contact Information.
-
8/2/2019 Matt Smith Spring Portfolio
3/26
Dakine CinchWrist support glove
Develop a device to prevent wrist injuries in snowboarders
without inhibiting the users ability to strap in and out.
Matthew [email protected] Page 3 of 28
-
8/2/2019 Matt Smith Spring Portfolio
4/26
25% of Snowboarding injuries are wrist injuries
Common Wrist InjuriesSprain: A torn or patially
torn wrist ligament(s)
Strain: A torn or partially
torn wrist tendon(s)
Fracture: A break in one of the bones
of the wrist, can be mistaken for a
sprain or strain or could happen at the
same time
Most injuries are caused bywhat emergency ocials
refer to as FOOSH
Falling
Onto an
Out
Stretched
Hand
70% of these wrist injuries are fractures
Matthew [email protected] Page 4 of 29
-
8/2/2019 Matt Smith Spring Portfolio
5/26
A snowboarder lives an active lifestyle.
What can be designed that allows him or her to adequate protection while
allowing the desired exibility demanded of the user.
Can wrist guards help prevent these injuries?
Matthew [email protected] Page 5 of 20
Research has shown that wrist guards are pretty
good at preventing wrist injuries. Snowboarders
wearing wrist guards are half as likely to sustain awrist injury than riders not wearing guards.
So why dont most riders wear them!?
Less than 10% of snowboarders wear wrist guards, can they really be that helpful?
Riders tend to avoid using wrist guards
due to them being uncomfortable and
bulky.
?
Comfortability / Style
Safety
Design Opportunity
Force is absorbed bythe splint in the wrist
guard and translated
up the forearm to pre-
vent injury.
-
8/2/2019 Matt Smith Spring Portfolio
6/26
Matthew [email protected] Page 6 of 20
Exploration
-
8/2/2019 Matt Smith Spring Portfolio
7/26
Materialityand reinement
Materials such as D30, a dilitant fabric,would allow the split to be exible yet still
supportive. The split would need to be more
rigid than D30, however.
A splint with a exible mid-section
could oer enough support and
could transfer the energy up the fore-
arm eectively. This could still oer
some exibilty for the user, although
it wouldnt be enough.
Matthew [email protected] Page 7 of 20
-
8/2/2019 Matt Smith Spring Portfolio
8/26
Further development
The possibilty of an integrated glove and wrist guard combo
utilizing the BOA system allowed for the best compromise
between support, comfortability, style, and exibily.
The Boa Systemoers simple and eective way to fasten / tighten articles of clothing.
Using the Boa system, a cable would be
run through a multi-piece wristguard.
This would allow the splint to lock
together while also allowing thenecessary freedom when loose.
Matthew [email protected] Page 8 of 20
-
8/2/2019 Matt Smith Spring Portfolio
9/26
-
8/2/2019 Matt Smith Spring Portfolio
10/26
Turning the Boa knob clockwise pulls the cable into the housing of the knob. This
pulls the forearm part of the wrist guard into the palm, locking together and creating
a supportive wrist splint.
To return the guard to its exible
position, you rst pull the Boa
housing up to unlock the ratchet.
Once the cable is loose, you pullthe bungee at the end to pull the
wrist guard apart.
Matthew [email protected] Page 10 of 20
-
8/2/2019 Matt Smith Spring Portfolio
11/26
Andreas WiigSignature Boot
Design a shoe inspired by professional snowboarder Andreas Wiig
Matthew [email protected] Page 1 1 of 20
-
8/2/2019 Matt Smith Spring Portfolio
12/26Matthew [email protected] Page 12 of 20
Brief: Design a hiking shoe inspired by thelifestyle of professional snowboarder Andreas
Wiig on and o the mountain.
Design Goals: This shoe is born of a mountain town. It should be ableto cope with the snow and mud easily but be casual enough to be worn
both as a hiking shoe or just around town. Whether the occasion is just a
laid back walk to dinner or a night out on the town, this shoe should suitthe consumers needs.
Market: Global snowboard market. Whether they arehardcore riders or the occasional rider and enthusiest.
-
8/2/2019 Matt Smith Spring Portfolio
13/26
Target Market
Bio: Born in Olso, Norway with 16 years of snowboardingexperience. Loves everything from backcountry riding
to lines in the park. Rides at Keystone and Breckenride in
Colorado.
Stylization: The shoe should reect life on the
mountain. A rened sense of style coupled withexciting bold colors and a laid back style.
Attitude: A desire to be a little mischeiviousand a constant lack of seriousness are consistent
traits to most snowboarders. Despite their
attitude towards most situations, they alwayswill go hard on the mountain.
Location: These shoes should be worn o themountain. They should be comfortable but oer
enough support to traverse snow and mud.
Matthew [email protected] Page 13 of 20
-
8/2/2019 Matt Smith Spring Portfolio
14/26
Inspiration
Matthew [email protected] Page 14 of 20
Imagery ofmountain towns and equipment are the main
drivers behind the design of the shoe, as well as Andreas
Wiig own personal style and air. Utilizing the shapes of his
snowboard boot binding and other vans trademark design
decisions, the style of the Andreas Wiig hiking shoe was born.
-
8/2/2019 Matt Smith Spring Portfolio
15/26Matthew [email protected] Page 15 of 20
-
8/2/2019 Matt Smith Spring Portfolio
16/26
-
8/2/2019 Matt Smith Spring Portfolio
17/26
Mesh Collar for breathability and comfort.
Pinstripe leather inspired by Wiig.
Traditional Jazz Stripe for thetraditional vans feel.
Canvas eyestay with brass eyelets.
Inspired side panel from Cartel binding.
SpecsDescription and Alternate Colorways
Matthew [email protected] Page 17 of 20
-
8/2/2019 Matt Smith Spring Portfolio
18/26
CheyenneTattoo MachineProfessional Tattoo Equipment
Design a handheld device for use by a professional tattoo artist
Matthew [email protected] Page 18 of 20
-
8/2/2019 Matt Smith Spring Portfolio
19/26
Opportunity Matrix
Design GoalsCustomizable, Ergonomic, Autoclavable
Matthew [email protected] Page 16 of 20
Typical tattoo machine
Contact Screw
Rear Spring
Armature BarCoils
Rubber Bands
Needle
Frame
Grip
Tip
Design OpportunityErgonomically driven
Mechanically driven
In order for a tattoo machine to be practical to a
professional tattoo artist: it must be customizable,
it has to meet ergonomic standards and balance
the weight of the motor eectively over the hand,and in order for it to be cleaned it must be auto-
clavable.
Matthew [email protected] Page 19 of 20
-
8/2/2019 Matt Smith Spring Portfolio
20/26
Analysis
Armature bar is noisy and intimidatingThe constant buzzing can cause nervousness in clients,
making the tattoo artsists job more dicult.
Electrical wires are exposedbesides being a safety hazard, the wires can bedamaged and cause shortages in the motor
Electromagnetic motor can be unreliable
Most tattoo machines use an electromagnetic current to powerthem. If this current is interupted it can eect the artists stroke.
The Grip is ineective and does
not balance weight eectivelyThough most artists use their own custom grip,
the way the grip balances and holds the machine
should be more ergonomic.
Use of a tattoo machine is personal
to every artist and each machine is
dierent. Common issues that many
artists encounter come down to
poor design choices to reduce cost
Matthew [email protected] Page 20 of 20
-
8/2/2019 Matt Smith Spring Portfolio
21/26
Exploration
Matthew [email protected] Page 21 of 20
Redistribution of weight and comfortability
were main concerns for the form.
-
8/2/2019 Matt Smith Spring Portfolio
22/26
Advanced Concepts
Matthew [email protected] Page 22 of 20
-
8/2/2019 Matt Smith Spring Portfolio
23/26
-
8/2/2019 Matt Smith Spring Portfolio
24/26
4.25
SpecsRotary Motor for reduced
noise and vibration.
Dedicated wire housing
Improved ergonomics
and weight balance.
The fnal productwas designed to rest acrossthe users hand for the best distribution ofweight
and comfort. The standard electromagnetic
motor was replaced with a rotary motor for much
quieter operation and less vibration. Any grip can
be used with the machine and the housing for the
motor can be accesed for customization.
Matthew [email protected] Page 24 of 20
2.25
5.75
-
8/2/2019 Matt Smith Spring Portfolio
25/26
Audio Receiver
Matthew [email protected] Page 26 of 20
-
8/2/2019 Matt Smith Spring Portfolio
26/26
Thank you for your time
Matthew Smith | Industrial Designer