1. The following products require a supported compiler:

MATLAB Compiler 4.16

MATLAB Builder NE 4.1

MATLAB Builder JA 2.2.3

MATLAB Builder EX 2.1

Stateflow 7.8

Simulink Coder 8.1

MATLAB Coder 2.1

2. Simulink requires a C compiler for simulation acceleration, model reference, and MATLAB

Function Block capabilities. It is recommended that you install a supported compiler on your

machine.

3. To accelerate computations with the following products, a supported compiler is required:

SimBiology 4.0

Fixed-Point Toolbox 3.4

4. After this installation is complete, you should continue with your configuration of the

MATLAB Distributed Computing Server as outlined in the instructions obtained from

www.mathworks.com/distconfig.

5. Run mbuild -setup from MATLAB before using MATLAB Compiler or builder products.