MasterVarioR2C Product Data
-
Upload
nicolauscopernic -
Category
Documents
-
view
212 -
download
0
Transcript of MasterVarioR2C Product Data
-
8/10/2019 MasterVarioR2C Product Data
1/5MasterVarioR2C|CodeNumber586.7
1.8
40|Version10.2
013
The automatic shelf system
optimally utilizes the floorspace of an object.
The tower system can bedesigned as above-ground orunderground system or as acombination of both variants.
Elevator for vertical transport
Optional turning unit
Vehicle height variable
Different level heightpossible
Up to 15 parking levels
Six cars per parking level
Floor loads per parking
space:2500 kg
Higher loads per parking
space possible uponrequest
Variable car dimensionsupon request
Please note the separate
technical information.
ge 1
e page
ge 2
aft
ge 3
wer
ge 4
riants
ge 5
riants
KLAUS Multiparking GmbHHermann-Krum-Strae 2D-88319 Aitrach
Fon +49 (0) 7565 508-0Fax +49 (0) 7565 508-88
PRODUCT DATA
Tower system
-
8/10/2019 MasterVarioR2C Product Data
2/5
730
380
65080
640150
H1
40
H2
H2
H2
100
H2
H2
H2
H2
270
H3
19
19
150
80
Maintenance andservice shaft
MasterVario R2 C | Code number 586.71.840 | Version 10.2013 Page 2 of 5
Shaft design
Shaft design
For 115 levelsTransfer cabin arranged centrally above the liftParking levels with different heights for variable vehicle heightsThree-row arrangement left and right of the lift possible
In case of multi-row arrangement, empty spaces arenecessary for moving purposesTurning unit optional (in transfer cabin or in system)
ge 4
riants
ge 1
e page
ge 2
aft
ge 3
wer
ge 5
riants
The dimension depends on the gate selected.
Horizontal supports to reinforce the shaft are possible.
The dimension is increased by 40 cm, if a turning unit is integrated on a parking level or a transfer cabin is used.
Access to the service and maintenance shaft only upon consultation with KLAUS Multiparking.
1
2
3
4
1
Electrical cabinet
Close to the transfer cabin room foran electrical cabinet is to be provided.Minimum dimensions:l: 240 cm, w: 200 cm, h: 230 cm.
Service and maintenance
A shaft is required for service andmaintenance works.Minimum dimensions:150 x 80 cm.
2
3
Height dimensions
levels
2
H1
484
for vehicles up to 160 cm
3 656
4 847
5 1019
H1
for vehicles up to 160 cm and3 levels for vehicles up to 200 cm
967
1139
parking spaces
4
6
8
10
6 1191 131112
7 1382 150214
8 1554 167416
9 1726 184618
10 1917 203720
11 2089 220922
12 2261 238124
13 2452 257226
14 2624 274428
15 2796 291630
car height
160
H2
172
200 212
H3
212
252
4
-
8/10/2019 MasterVarioR2C Product Data
3/5
MasterVario R2 C | Code number 586.71.840 | Version 10.2013 Page 3 of 5
ge 4
riants
ge 1
e page
ge 2
aft
ge 3
wer
ge 5
riants
Tower design
Service and maintenance
A shaft is required for service andmaintenance works.Minimum dimensions:150 x 80 cm.It is also possible to attach an outsideladder to access the single levels.
730
635
H2
H2
100
H2
H2
H2
H2
290
23
0
H1
19
H3
150
80
Maintenance andservice shaft
Tower design
For 115 levelsTransfer cabin arranged centrally inside the liftParking levels with different heights for variable vehicle heightsThree-row arrangement left and right of the lift possible
In case of multi-row arrangement, empty spaces arenecessary for moving purposesTurning unit optional (in transfer cabin or in system)
Horizontal supports to reinforce the shaft are possible.
The dimension is increased by 25 cm, if a turning unit is integrated on a parking level or a transfer cabin is used.
If more parking levels are available, the basic dimensions are increased.
If the transfer area is arranged on the side, dimension H1 is increased by 60 cm.
1
2
3
4
1
Electrical cabinet
Close to the transfer cabin room foran electrical cabinet is to be provided.Minimum dimensions:l: 240 cm, w: 200 cm, h: 230 cm.
Transfer area on the side of the lift
In case of a tower design the transferarea can be arranged on the side ofthe lift. A pallet change system can be
integrated.
2
Height dimensions
levels H1
for vehicles up to 160 cm
3 936
4 1127
5 1299
H1
for vehicles up to 160 cm and3 levels for vehicles up to 200 cm
1247
1419
parking spaces
4
6
8
6 1471 159110
7 1662 178212
8 1834 195414
9 2006 212616
10 2197 231718
11 2369 248920
12 2541 266122
13 2732 285224
14 2904 302426
15 3076 319628
car height
160
H2
172
200 212
H3
362
402
max.310
290
3
4 4
-
8/10/2019 MasterVarioR2C Product Data
4/5
MasterVario R2 C | Code number 586.71.840 | Version 10.2013 Page 4 of 5
ge 3
wer
ge 1
e page
ge 2
aft
ge 4
riants
ge 5
riants
Arrange options
Shaft design
Tower design Tower/shaft design
Enter forward.Exit backward.
Enter forward.Exit forward.
Turning of the vehiclewithout turning platform.
Enter forward.Exit forward.
Turning of the vehiclewith turning platform.
Arrangement of the
transfer in a randomangle.
Enter forward.Exit forward.
Turning of the vehiclewithout turning platform.
Enter forward.Exit backward.
Enter forward.Exit forward.
Turning of the vehiclewith turning platform.
Enter forward.Exit forward.
Turning of the vehiclewith turning platform.
-
8/10/2019 MasterVarioR2C Product Data
5/5
A maximum of three rowsto the left and right of thelift are possible.
Lift
Empty spacesIn case of two-row arrangement: 1 empty space.In case of three-row arrangement: 2 empty spaces.
Free spaceIn case of tower and tower/shaft design.
730 975 1205 1205 1440 1670
Lift
Lift
Lift
Lift
Lift
Lift
MasterVario R2 C | Code number 586.71.840 | Version 10.2013 Page 5 of 5
ge 3
wer
ge 1
e page
ge 2
aft
ge 4
riants
ge 5
riants
We reserve the right to change this specification without further notice
KLAUS Multiparking reserves the right in the course of technical progress to use newer or other technologies, systems, processes,procedures or standards in the fulfillment of their obligations other than those originally offered provided the customer derives nodisadvantage from their so doing.
Arrange options
Shaft design
730 975 1205 1205 1440 1670
Lift
Lift
Lift
Lift
Lift
Lift
Tower design
730 975 1205 1205 1440 1670
Lift
Lift
Lift
Lift
Lift
Lift
Tower/shaft design