Master Flame Fire Pit Screens, Fire Grates, All-Steel Fire ...

Master Flame Fire Pit Screens, Fire Grates, All-Steel Fire Pits, Gas Log and Burner Sets

800-642-7254

Catalog MSRP

2021-2022

NEW Low Profile Hinged Square Screen

Made in the USA

Master Flame™ Fire Pit Safety Screen

Helps prevent accidents, contains incendiary sparks, ash and soot. Two hingeddoors (panels with decorative handle) allow access and simple fire management.

• Available in welded carbon steel, stainless steel or hybrid (Refer to chart on page 8.)

• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch;

23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied,

weather-resistant black finish

Twin Access Panels

HINGED ROUNDSafety Screen

HINGED ROUND (TWIN DOORS)

24” THRU 29”MSRP






OVER 60”

CS* $684 $847 $871 $907 $949 $1243 Call for quote

HYBRID* $721 $871 $929 $985 $1052 $1395 Call for quote

304 SS* $937 $1135 $1160 $1202 $1247 $1695 Call for quote

TWIN ACCESS FIRE PIT SCREEN

How to determine screen size to order from Master Flame Dealer• For Round: Measure pit inside diameter and add 4”.

Round Hinged Fire Pit Screen Sizing: 24” to 60” Diameter• Height is approximately 17” unless specified• Over 40” diameter includes reinforced bracing strap on bottom rail• OVER 60”: Call for quote.• Custom mounting tabs available

NOTE: Screen Heightis approximately 17”

unless specified.

Both Hinged Access Doors Open

Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)

2Voice: 630-238-0611 800-642-7254

Fax: 630-238-9871 [email protected]

Dome-Shaped Fire Pit

Screen (Poker Required)

Safety Screen

LIFT OFF DOME







OVER 60”

CS $324 $385 $452 $487 $561 $880 Call for quote

HYBRID $367 $434 $522 $578 $654 $1026 Call for quote

304 SS* $544 $648 $684 $709 $782 $1259 Call for quote

NOTE: Screen Height

is approximately 17” unless specified.

Lift Off Dome

LIFT OFF DOME FIRE PIT SCREEN


Master Flame™ Fire Pit Safety Screen


• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch;

23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant

electrostatically applied, weather-resistant black finish

LIFT OFF DOME

Round Dome Fire Pit Screen Sizing: 24” to 60” Diameter

• Height is approximately 17”• OVER 60”: Call for quote.• Custom mounting tabs available

Helps prevent accidents, contains incendiary sparks,ash and soot. Lift off screen to tend fire (poker requiredwhen hot).

Brushed Finish Available for Stainless Steel Models - $75 UPCHARGESingle Door Hinged Access Option - $175 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)

1 ALL UNITS BLACK FINISHRETAIL PRICE LIST

Effective May 1, 2021

Single Hinged AccessPanel Option AvailableMaster Flame™

Outdoor Fire Pit Safety Screens

Custom Mounting Tabsavailable for Fire Bowl FirePits - $25 UPCHARGE.

http://www.masterflamegaslogs.com/SafetyScreen.html


http://www.masterflamegaslogs.com/Screen_Grate_Product%20Sheet_Web%20022017.pdf
















Safety Screen

HINGED (SINGLE DOOR)

17” HeightTOTAL PERIMETER

Up to 120” MSRP

17” HeightTOTAL PERIMETERFrom 121 up to 144”

MSRP

17” HeightTOTAL PERIMETER

From 145 to 192”MSRP

TOTAL PERIMETER192”+

per inch ADDERAdd to 192” MSRP

CS* $794 $952 $1089 $10HYBRID* $907 $1060 $1259 $15304 SS* $1015 $1219 $1417 $20

HINGED SQUARE / RECTANGLE

Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEExample: Carbon Steel 30” x 30” hinged square = $742,304 SS 45” x 45” hinged square = $1325, Hybrid 32” x 50” hingedrectangle = $1177

Hinged Rectangle Model

SINGLE ACCESS FIRE PIT SCREEN


• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied, weather-resistant black finish

Square / Rectangular Fire Pit Screen Sizing: TOTAL PERIMETER (Length + Width x 2)

Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged frontdoor (panel with handle) opens up for access and simple fire management.

Master Flame™ Square / Rectangular Fire Pit Safety Screen

• Two handles on bottom sides and one handle on door • Height is 17” unless specified• Over 191” Perimeter, Use “per inch” adder.• Custom mounting tabs available

Single AccessPanel

How to determine screen size to order from Master Flame Dealer• For Square/Rectangle: Add 2” to inside pit dimensions (2” to length and 2” to width).

NOTE: Screen Height is approximately

17” unless specified.

Safety Screen

HINGED (SINGLE DOOR)

12” Height

24” to 30” SQUAREMSRP

12” Height

From 31” up to 36” SQUAREMSRP

12” Height

From 37” to 48” SQUAREMSRP

OVER 48” Square48”+

per inch ADDERAdd to 48” square MSRP

CS* $794 $952 $1089 $40HYBRID* $907 $1060 $1259 $60304 SS* $1015 $1219 $1417 $80

LOW PROFILE HINGED SQUARE

Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEExample: Carbon Steel 30” x 30” hinged square = $742,304 SS 45” x 45” hinged square = $1417, Hybrid 50” x 50” hingedsquare = $1379

Low Profile Brushed Finish

SINGLE ACCESS FIRE PIT SCREEN


• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire; 64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied, weather-resistant black finish

Not Available in Rectangular Sizes

Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged frontdoor (panel with handle) opens up for access and simple fire management.

Master Flame™ Low Profile Square Fire Pit Safety Screen

Single AccessPanel

• Handle on top and handle on door• Height is 12” unless specified• Over 191” Perimeter, Use “per inch” adder.• Custom mounting tabs available

How to determine screen size to order from Master Flame Dealer• For Square Screen: Add 2” to inside pit dimensions (2” to length and 2” to width).

NOTE: Screen Height is approximately

12” unless specified.

4Voice: 630-238-0611 800-642-7254


ALL UNITS BLACK FINISH3 RETAIL PRICE LIST


NEW LOW PROFILESquare Fire Pit Screen









NOTE: ScreenHeight is equal to1/2 the diameter.

• Available in welded carbon steel, stainless steel or hybrid(Refer to chart on page 8.)

• 1/4" x 1" solid steel flat bar framework• Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire;

64 openings/sq. inch)• Stainless steel hardware• High heat-resistant electrostatically applied,weather-resistant

black finish

Safety Screen

PIVOT ROUND







OVER 60”

CS* $360 $431 $511 $526 $715 $1049 Call for quote

HYBRID* $402 $486 $612 $635 $846 $1239 Call for quote

304 SS* $581 $697 $786 $812 $1000 $1503 Call for quote

Master Flame™ Fire Pit Safety Screen Round Pivot Fire Pit Screen Sizing:

24” to 60” Diameter• Height is proportional (1/2 of diameter)• All screens up to 47” diameter are 4 panel• All screens over 48” diameter are 8 panel• OVER 60”: Call for Quote.• Custom mounting tabs available

Add Clamps and Stop Tabs for

Fire Bowl Pivot Screen Installation• Bowl Clamps welded to screen• 2 Stop Tabs welded to inside of screen

PIVOT ROUND

PIVOT ACCESS FIRE PIT SCREEN

1/4” x 1” Bar

Brushed Finish Available for Stainless Steel Models - $75 UPCHARGEApproximate Unit Weight: 1lbs per inch of diameter (Example 42” Diameter Screen weighs about 42 lbs.)


STANDARDBLACK FINISH

OPTIONALHYBRID

STANDARDCARBON STEEL

OPTIONALSTAINLESS STEEL

Helps prevent accidents, contains incendiary sparks, ash andsoot. Open either side of the clamshell styled pivot screen foraccess and simple fire management.

Framework 304 Stainless Carbon Steel Carbon SteelMesh Stainless Steel Stainless Steel Carbon Steel

Hardware Stainless Steel Stainless Steel Stainless Steel

5 6Voice: 630-238-0611 800-642-7254


ALL UNITS BLACK FINISHRETAIL PRICE LIST


Clamps and Stops for Mounting Pivot Screento Fire Pit Bowl - $25 UPCHARGE.

Master Flame™Outdoor Fire Pit SafetyScreens

Pivot

Pivot ScreenRight Side Open

For Larger or Customized Screensand Grates, see Back Cover

Pivot ScreenLeft Side Open

Spark Arresting 8 x 8 per inch 23 Gauge Steel Wire Mesh







FIRE PIT GRATE

ROUND

24”MSRP

27” MSRP

30”MSRP

33”MSRP

36”MSRP

38”MSRP

Over 38” per inchADDER

to 38” MSRP5/8” CARBON STEEL $191 $210 $239 $274 $350 $440 $15

5/8” STAINLESS STEEL $612 $612 $771 $828 $880 $936 $30

CHAR-GUARD

Ember Catch Option

24” GrateAdder

to MSRP

27” GrateAdder

to MSRP

30” GrateAdder

to MSRP

33” GrateAdder

to MSRP

36” GrateAdder

to MSRP

38” GrateAdder

to MSRP

Over 38”Adder

to MSRP$36 $42 $52 $67 $100 $100 $100

Approx. Weight of Grate: 43 lbs 54 lbs 64 lbs 70 lbs 77 lbs 82 lbs

Round FireGrate

• Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock

• Standard Sizes - Tip to Tip (Tine): 38”, 36”, 33, ”30”, 27”, 24”

• 4” standard leg height; 4” standard tine height(8” floor to top of tine)

• Optional Char-Guard Ember Catch

5/8”Bar

Round Fire Grate with Char-Guard Ember Catch

Master Flame™ Round Fire Pit Grate

Round grate shape is ideal for campfires, fire pits or cornerwood-burning fireplaces. Master Flame grates are a greatupdate for old cast iron grates.

WELDED STEEL FIRE PIT GRATES

Master Flame™Outdoor Fire Pit Grates

FIRE PIT GRATE

SQUARE

24”x24”MSRP

27”x27” MSRP

30”x30”MSRP

33”x33”MSRP

36”x36”MSRP

38x38””MSRP

Over 38” per inchADDER

to 38” MSRP5/8” CARBON STEEL $197 $216 $239 $280 $350 $420 $15

5/8” STAINLESS STEEL $612 $660 $760 $937 $930 $963 $30

CHAR-GUARD

Ember Catch Option

24” GrateAdder

to MSRP

27” GrateAdder

to MSRP

30” GrateAdder

to MSRP

33” GrateAdder

to MSRP

36” GrateAdder

to MSRP

38” GrateAdder

to MSRP

Over 38”Adder

to MSRP$36 $42 $52 $67 $100 $100 $100

• Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock

• Square Sizes - 24” x 24”, 27” x 27”, 30” x 30”,36” x 36”, 38” x 38”

• 4” legs for optimal air circulation (longer or shorter legs available for $10 UPCHARGE)

• Optional Char-Guard Ember Catch

SQUARE GRATES

5/8”Bar

Master Flame™ SquareFire Pit Grate

For square fire pits, these fire grates are weld steelbar design. Master Flame grates are a great updatefor old cast iron grates.

Char-Guard Models

Char-Guard Option improves complete burn consistency, simplifies ash clean-up and allows youthe choice of using charcoal. Char-Guard is heavy duty expanded metal fitted and welded to the underside of the grate.

Char-Guard Models

Char-Guard Option improves complete burn consistency, simplifiesash clean-up and allows you the choiceof using charcoal.Char-Guard is heavyduty expanded metalfitted and welded tothe underside of thegrate.

Approx. Weight of Grate: 45 lbs 56 lbs 66 lbs 72 lbs 79 lbs 89 lbs

Square Fire Grate with Char-Guard Ember Catch

SquareGrate

7 8Voice: 630-238-0611 800-642-7254


Brushed Finish Available for Stainless Steel Models - $75 UPCHARGE

The TeePee Grate allows kindling or firewood to be leaned up against itself in a tepee shaped cone or pyramid. As thewood burns and falls into the middle it willcreate a "core of heat" of hot wood embers.

TEEPEE

GRATE

MSRPAbout 15 lbs

5/8” Carbon Steel

$95• Welded 5/8" carbon steel bar stock• 17" Tall (Top to bottom)

TeePee FIRE GRATE 15-1/4”

17”Tall

ROUND GRATES

DISPLAY

STANDHolds 10 Pokers

MSRP

Display ONLY $100Purchase 10

Poker FREEWeight of poker - 3 lbs. each

Stainless Steel Pokers (40” Long)• Welded 304-Stainless steel rod,

3/8" diameter• Vinyl foam handle (Closed Cell)

• Hook-back tip• Custom Lengths Available

STAINLESS

STEEL POKER

3/8” DIA. STAINLESS

STEEL 40” LENGTH

WITH CLOSED CELL

VINYL HANDLE

Hook Back Design

MSRP $50

with HOOK-BACK Tip

POKER

DIsplay Stand

3/8”Dia.

POKER

RETAIL PRICE LIST


http://www.masterflamegaslogs.com/Fire_Pit_Grates.html


























• 18 Gauge Galvanized Metal Plated Finish• High heat-resistant electrostatically

applied, weather-resistant black finish• Welded stainless steel handle• Edge Trim• Sizes to fit 28” diameter, 34 diameter, 42”

diameter and 46” diameter fire pit openings

• #304 Stainless Steel, 16 Gauge• 44” Diameter Size covers fire

pits up to 42” diameter• Edge Trim • High heat-resistant

electrostatically applied, weather-resistant black finish on topside

Stylish Octagonal Shape Resists High Winds!

This Snuffer Lid helps put out the fire in a shorter period of time and not only keeps outside debrisfrom getting into your fire pit...it keeps the unburnedwood dry for the next time you build a fire.

Round Covers fit up to 46” opening

Round and Square Pit Cover helps snuff outthe fire in a shorter period of time and keepsdebris and rain out of your fire pit.

FOLDING Fire Pit Cover

Octagonal / Round

SNUFFER LID

30” Dia. MSRP

36” Dia.MSRP

42” Dia. MSRP

48” Dia. MSRP

Galvanized Steel Platedwith Black Finish

$190(for 28” Opening)




FOLDING FIRE

PIT COVER

44” x 44” DiameterMSRP

44” SquareMSRP

STAINLESS STEEL $499 $499

OCTAGONAL or ROUND

ROUND or SQUARE Welded StainlessSteel Handles

OctagonalShape

Fire Pit Cover - Snuffer Lid

FIRE PIT COVERS and SNUFFERS

Master Flame™Outdoor Fire Pit Covers, Snuffers,Fire Rings and Accessories

Weight of the octagonal and round snuffer covers - 17 lbs. each

Weight of the square and round folding covers - 40 lbs. each

Dome Fire Pit Cover helps snuff out the fire in a shorter period of time andkeeps debris and rain out of your fire pit.

42” Diameter and 12” High

36” Diameter and 8” High

DOME FIRE PIT COVER 36” DiameterMSRP

42” DiameterMSRP

CARBON STEEL $425 $450

DOME COVER

Welded Top and Side Stainless Steel Handles

Weight of dome covers - 45 lbs. each

Folds in Half forEasy Storage

Welded StainlessSteel Handles

RoundShape

• Turned Carbon Steel, 14 Gauge• 42” Diameter Size covers fire

pits up to 40” diameter; 12” dome height• 36” Diameter Size covers fire

pits up to 34” diameter; 8” dome height• Edge Trim• High heat-resistant electrostatically applied,

weather-resistant black finish on topside

SQUARE OR RECTANGULAR FIRE PITS

Master Flame™Welded Steel Outdoor Fire Pits

Note: Images of customized Master Flame Steel Fire Pit taken on restaurant’spatio. Also seen on catalog cover.

Enjoy the warmth, mood and glow of an outdoor fire in your gathering area. This durable and lasting fire pit design comeswith steel fire grate and optional hinged fire pit safety screen forsimple fire management. Available in 5 sizes.

Customization: Steel fire pit can be customize by plasma cutting the steel plate base, side panels or paintingartwork on metal plate or ember screen. Plasmacut artwork is limited to silhouette cutting or stenciled logo.

Welded Steel Fire Pit • 9 gauge steel plate • smaller footprint• 20” Fire Pit Height (37” Height with safety screen)• Heat and weather-resistant black finish

Welded Steel Square Fire Pit Grate• 5/8” steel bar stock• 2” legs• Heat and weather-resistant black finish

OPTIONAL Hinged Fire Pit Safety Screen• Fitted square or rectangular model• Screen height is approximately 17”• 1/4 x 1” solid welded steel framework• Steel wire screen mesh (8 x 8 per/sq.inch; 23 gauge)• Choice of carbon steel, hybrid or all stainless steel

Square orRectangle

Fire Pit

BASE CHOICE

MSRPFire Pit

(Drop-in Drink Railnot included)

HINGED Safety Screen

Adder

24” 3LG,5 $XXX $600 Mild Steel$695 Hybrid$780 Stainless

30” Choice of $XXX $600 Mild Steel$695 Hybrid$780 Stainless

36” Choice of $XXX $660 Mild Steel$725 Hybrid$845 Stainless

24” x 24” $499STANDARDor CUSTOM



30” Choice of $XXX $660 Mild Steel$725 Hybrid$845 Stainless$550 Mild Steel$625 Hybrid$700 Stainless



Example Weight (36” x 36”square fire pit shown above):Approximately 266 lbs. (Fire PitScreen is approximately 56 lbs.;Grate 50 lbs.; and Fire Pit alone160 lbs.)

Master Flame™ Square or Rectangular Fire Pit

36” x 36” SquareSteel Fire Pit withGrate and Standard MetalPlate Base

9 10Voice: 630-238-0611 800-642-7254


RETAIL PRICE LIST


http://www.masterflamegaslogs.com/fire_pit_rings_snuffers.html



























http://www.masterflamegaslogs.com/fire_pits.html




Voice: 630-238-0611 800-642-7254


ROUND BOWL FIRE PITS

Master Flame™Welded Steel Outdoor Fire Pits

RoundBowlFire Pit

BASE CHOICE

MSRPFire Pit

(Includes bowl,grate and base)

DOME SafetyScreenAdder

PIVOT SafetyScreen Adder

$225 Mild Steel $255 Mild Steel$255 Hybrid $285 Hybrid

$375 Stainless $410 Stainless

$265 Mild Steel $305 Mild Steel

$300 Hybrid $345 Hybrid

$450 Stainless $495 Stainless$315 Mild Steel $360 Mild Steel

$365 Hybrid $435 Hybrid$475 Stainless $555 Stainless

24”dia.

$344TRIPOD, 4LG-SQ, 4LG-R,

XBASE, SWN,RING

30”dia.


XBASE, SWN,RING

36”dia.


XBASE, SWN,RING

TRIPOD Base

(TRIPOD)FOUR LEG BASE-ROUND

(4LG-R)

FOUR LEG BASE-SQUARE

(4LG-SQ)Standard X BASE

(XBASE)

BLACK SWAN BASE

(SWN)RING BASE

(RING)

OPTIONAL Dome or Pivot Model

Fire Pit Safety Screen• Screen height: Dome is

approximately 17”; Pivot Model is approximately half the diameter of bowl

• 1/4 x 1” solid welded steel framework

• Steel wire screen mesh (8 x 8 per/sq.inch; 23 gauge)

• Choice of carbon steel, hybrid or all stainless steel

Welded Steel Fire Pit • 9 gauge mild steel bowl• Expanded steel metal mesh welded to center drain• 30” bowl approximately 18” fire pit height; 36” bowl

approximately 20” height (17” screen height)• Heat and weather-resistant black finish

Welded Steel Fire Pit Grate• Welded 5/8” steel bar stock• Heat and weather-resistant black finish

Steel round bowl fire pits are available in 24”diameter, 30” diameter and 36” diameter with a choice from six base styles.Drained bowl design includes steel grate. Optional pivot ordome fire pit safety screen is available in mild steel, hybrid or all stainless steel models.

Master Flame™ Fire Bowl Fire Pit

36” Fire Pit Bowl and grate shown

with 4 Leg Square Base and with

Dome Fire Pit Safety Screen

RETAIL PRICE LIST


ROYAL SERIES COAL EFFECT PAN BURNER

• 12" Front X 6-3/4" Rear X 6" Deep Tray• 14" Front X 8-3/4" Rear X 6" Deep Tray• Burner supplied with dispersion medium (non-burning)

• 30-piece coal set (glowing non-consummable for pan)

ROYAL SERIES

Coal Effect

Burner

MODEL WITH MMV-READY

MSRP

WITH MMV/HHR

MSRP

WITH EIR

MSRP#B 401 12 NG 12” Burner

- NG

$660 $800 $900

#B 401 12 LP 12” Coal

- LP

#B 401 14 NG 14” Burner

- NG

#B 401 14 LP 14” Burner

- LP

BURNER SUPPLIED WITH COAL (Non-Burning Synthetic)

SAME PRICING FOR ALL MODELS!

ACCESSORY DESCRIPTION MSRP#COAL B Bag of COAL (Non-Burning):

Enough to Fill 14” Burner Tray

$37.00

Model GV34MMV/HHRShown

INDOOR SPECIALTY BURNER

12

Fully VentedSpecialty Burner

36” Fire Pit Bowl

shown with 4 Leg

Round Base and

Pivot Fire Pit

Safety Screen

Hi to Lo Modulating

with ACCUMEN

REMOTE CONTROL

Hi to LoModulating

with Electronic

Ignition and REMOTE

CONTROL

FITS MOST Basket Designs

Hi Lo ModulatingMMV/HHR

MERTIK GV34 - Hi Lo





http://www.masterflamegaslogs.com/gasCoal.html

http://www.masterflamegaslogs.com/gasCoal.html







Specify Natural Gas (NG) or Propane Gas (LP) for each model ordered. Be sure to specify log style – Red Oak (RO), Charred Split Oak (CSO) Enchanted Evening (EE) or Aged Oak (AO) – along with the burner size.

Examples: #EL24-NG-AO, #EL21-LP-CSO, #EL36-NG-RO

Log Styles Apply to ALL GAS LOG Models as noted in descriptions.

ELITE Burner

with Log set

18” Burner

(#EL18)

MSRP

21” Burner

(#EL21)

MSRP

24” Burner

(#EL24)

MSRP

30” Burner

(#EL30)

MSRP

36” Burner

(#EL36

MSRPMATCH LIT $630 $660 $700 808 $1400

Log Style Choice RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO RO

Burner ONLY $511 $541 $581 $662 $1118INSTALLATION KIT includes Black Lava Rock, Glowing Embers, Vermiculite Medium, Bendable Gas Line with Fittings and 10 Scent Sticks.Damper Clamp not supplied with Match-Lit Burner.

Raised Rear Log Support

Raised Rear LogSupport

Grate FacadeSeparates forEasy Installation

Rear Burner withDiverters

Front Burnerwith Baffles Center Grate Tine

Holds“Scent Sticks”

Ember Burner through Lower Pan

• Cleanest, most realistic burn in the industry• Straight port injection• Sandless - Specifically designed diverters and baffles

disperse gas to provide a livelier, more natural-looking fire. No sand maintenance required.

• One piece burner construction• Separate logs - can be configured to the owner's

preference (number of logs depends on system size)• Choice of Log Style• High heat-resistant electrostatically applied, black finish• Optional log accessory kit available to hide electronics,

hook ups, etc.

Master Flame™Indoor Fully Vented Gas LogFireplace Systems

ELITE TRIPLE BURNER with LOGS

Red Oak Logs (RO)Charred Split Oak Logs (CSO)

Aged Oak Logs (AO)

GAS LOG BURNERS

GAS

SAFETY PILOTMatch Light VALVE (Manual)

Natural GasONLY

Hi to Lo MANUAL MODULATING

MILLIVOLT READY

Hi to LoModulating

with

Remote

ELECTRONICIGNITION

With REMOTE

Master Flame™ EliteTriple Burner with Logs

Ordering Gas Log Burner and Logs

Optional: Specify Gas Control Valve

Upgrade of installed gas valves.

MANUAL VALVE

MATCH LIGHT(NG ONLY)

MANUAL VALVE

SAFETYPILOT

(NG or LP)

MANUAL MODULATING VALVE

KIT* (NG or LP)

MILLIVOLTREADY

VALVE KIT* (NG or LP)

Hi to Low MODULATING

with REMOTE

CONTROL

Hi to Low MODULATING

REMOTE CONTROL and ELECTRONIC

IGNITION*(NG or LP)

Add

$178

Add

$435

Add

$502

Add

$671

Add

$925

UPGRADE KIT ONLY - Dealer Conversions

$103 $145 $303 $364 $495 $645

UPGRADE: Factory Installed Gas Valve

The Elite Series is the preferred choice of thosewho want the fullest, most natural looking flame,and the only choice for those who want the luxuryand esthetic appeal of a real wood fire. Optionalconveniences like hi-lo flame modulation, remotecontrols and even electronic ignition give theowner the ultimate in comfort and mood control.

Weight of Burner: 35 lbs 40 lbs 45 lbs 50 lbs 55 lbsWeight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs 100 lbs

The Master Flame Elite TRIPLEBURNER design feature MASTERFLAME’s SANDLESS STRAIGHTPORT INJECTION SYSTEM andrear-elevated back log supportsfor a brighter, fuller flame and themost natural wood-burning look.

13 14Voice: 630-238-0611 800-642-7254


RETAIL PRICE LIST


ALL Master FlameELITE BURNERSand Gas Valves Factory Assembledand Bench Tested prior to shipment.

ALL Master FlameELITE BURNERSand Gas Valves Factory Assembledand Bench Tested prior to shipment.

http://www.masterflamegaslogs.com/EliteGasLogSheetWEB.pdf



http://www.masterflamegaslogs.com/tripleBurner.html





http://www.masterflamegaslogs.com/EIRtest.html











http://www.masterflamegaslogs.com/GAS%20LOG%20Product-Info_web_012016.pdf





Master Flame™Indoor Fully Vented Gas Log Fireplace Systems

15

ELITE Gemini

Burner

with Log set

18” Burner

(#ELG18)

MSRP

21” Burner

(#ELG21)MSRP

24” Burner

(#ELG24)

MSRP

30” Burner

(#ELG30)

MSRPMATCH LIT 900 $930 $960 $1082

Log Style Choice RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO

Specify NG or LP, Log Style and burner size. Examples: #ELG18-NG-RO, #ELG24-LP-CSOOptional Gas Control Valve UPGRADE (see page 14for pricing and pictures of installed gas valves).

The “SEE THRU” GEMINI Series features Master Flame’ssandless, straight port injectionproviding the liveliest and most natural-looking flame and burn - noticeably superior tograte/burner/sand/pan log sets.

• Five Burners - Two Outside Burners, Center Burner and Twin Ember Burners (One on Each Side)

• High heat-resistant electrostatically applied, black finish

• Choice of Log Style (see page 4).

• Optional Gas Control Valve Upgrade (see page 2)

Center Burnerwith Diverters

Side Burnerswith Baffles

Center Grate TineHolds “Scent Sticks”(Both Sides)

Ember Burner through Lower Pan (Both Sides)

ELITE GEMINI “SEE-THRU”5 BURNER With LOGS

Match Lit Model – Natural Gas OnlySpecify log style (see page 4) and burner size.

Example: #SB24-RO or #SB20-CSO

• Welded steel pan and burner tube • Durable welded steel grate for gas logs• Natural Gas only - Match Lit ONLY• Electrostaticly finished with high heat-resistant

black paint • Choice of Logset Style: Red Oak, Charred Split

Oak or Aged Oak

Single

Burner

with Log set

20” Burner

(#SB20)

MSRP

24” Burner

(#SB24)

MSRP

30” Burner

(#SB30)

MSRPMATCH LIT $519 558 $667

Log Style Choice RO/CSO/AO RO/CSO/AO RO/CSO/AO

Burner ONLY $312 $333 $390

PREMIUM SINGLEBURNER with LOGS

Grate(5/8” Bar Stock)

Burner TubePan for Holding Mediums- Sand for Flame Pattern- Embers

Get the flame and esthetic appeal of a real wood fire with the hand built Master Flame SAND BURNER Series Gas Log System. Separate steel grate allows optimum gas log placement for most efficient and natural looking flame. Available in 20”,24” or 30” burner sizes.

RH Set-upShown

Weight of Burner: 37 lbs 42 lbs 47 lbs 52 lbsWeight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs

16Voice: 630-238-0611 800-642-7254


For Master Flame Indoor and OutdoorGas Log Burners

CHARRED

SPLIT

OAK

SIZELog Set

Logsin Set MSRP

#CSO18 18” 6* $201#CSO21 21” 6* $219#CSO24 24” 8* $291#CSO30 30” 8* $338

LOG KITS

ACCESSORY KIT

* Front log is 2-piece

RED

OAK

SIZELog Set

Logsin Set MSRP

#RO18 18” 5 $201#RO21 21” 6 $219#RO24 24” 7 $237#RO30 30” 8 $291

AGED

OAK

SIZELog Set

Logsin Set MSRP

#AO21 21” 6 $243#AO24 24” 6 $385#AO30 30” 8 $403

LOG

ACCESSORY KIT

Logsin Kit MSRP

#LAK 4 $50

Red Oak Log Sets

Charred Split OakLog Sets

Aged Oak Log Sets

OUTDOOR

DUAL

Burners

with Log set

LogStyle

MATCH LIT (NG ONLY)

MSRP

#ODSS-18” CSO/RO $703#ODSS-21” CSO/RO $757

#ODSS-24” CSO/RO $812#ODSS-30” CSO/RO $920

OUTDOOR

Triple Burner

with Log set

LogStyle

MATCH LIT (NG ONLY)

MSRP#ODSSST-18” CSO/RO $850#ODSSST-21” CSO/RO $900

#ODSSST-24” ALL STYLES $963#ODSSST-30” ALL STYLES $1133

100% StainlessSteel DualBurner Outdoor

100%StainlessSteel TripleBurner Outdoor

OUTDOOR2 BURNER

OUTDOOR SEE-THRU 3 BURNER

GAS LOG BURNERS OUTDOOR GAS LOGS and LOG SETS

RETAIL PRICE LIST


http://www.masterflamegaslogs.com/fiveBurner.html









http://www.masterflamegaslogs.com/singleburner.html

http://www.masterflamegaslogs.com/singleburner.html




http://www.masterflamegaslogs.com/OUTDOORdualburner.html



http://www.masterflamegaslogs.com/OUTDOOR%20Burner%20Sht023015e.pdf

http://www.masterflamegaslogs.com/OUTDOOR%20Burner%20Sht023015e.pdf

http://www.masterflamegaslogs.com/OUTDOORtripleburner.html



FIRE PIT GRATE

RECTANGULARTOTAL PERIMETER

Up to 96”MSRP

TOTAL PERIMETER97” to 144”

MSRP

TOTAL PERIMETER145-180”

MSRP

TOTAL PERIMETER181” +

per inch ADDERAdd to 180” MSRP

5/8” CARBON STEEL $189 $233 $367 $155/8” STAINLESS STEEL $558 $756 $862 $30

CHAR-GUARD

Ember Catch Option

24” Grate Adder to MSRP



Over 38” Adder to MSRP

$36 $42 $65 $100

RECTANGULAR FIREPLACE GRATES Rectangular Fireplace Grate

with Char-Guard Ember Catch

Standard Fireplace Grate with Char-Guard Ember Catch

RectangularFireplaceGrate

StandardFireplaceGrate

Standard Welded Steel Grates

• Choice of 5/8" or 1/2” carbon steel bar stock or stainless

steel bar stock

• Standard Fireplace Sizes 20”, 24”, 28” and 32” Width

(Widest Part)

• 17” deep

• Char-Guard Ember Catch Option

• 4” legs for optimal air circulation (longer or shorter legs available

for $10 UPCHARGE)

5/8”Bar 1/2”

Bar

Standard FIREPLACE GRATES

FIREPLACE GRATE

STANDARD SHAPE

20” (6 Bar/Tines)

MSRP

24”(7 Bars/Tines)

28”(8 Bar/Tines)

32” (9 Bar/Tines)

5/8” CS $162 $172 $176 $1835/8” SS $309 $379 $403 $4511/2” CS $112 $124 $131 $1431/2” SS $187 $200 $210 $233

CHAR-GUARD

Ember Catch Option





$10 $20 $30 $40

Char-Guard Models Char-Guard Option improves complete burn consistency, simplifies ashclean-up and allows you the choice of using charcoal. Char-Guard is heavyduty expanded metal fitted and welded to the underside of the grate.

17 18Voice: 630-238-0611 800-642-7254


Master Flame™Wood Burning Fireplace Accessories

RETAIL PRICE LIST


FIREPLACE SCREENS

Fireplace SAFETY SCREENS

HEIGHT

WIDTH

BOW/CURVEDEPTH

n

OUTSIDE FEETon End

How to Order: Supply us with height and width of flatscreens and footing requirement (Outside and Inside). Forcurved screens, we require the height, width and bow (curve).Examples: 28” H x 40” W screen is 1,120 square inches or7.7 square feet with the MSRP of $188. A fireplace screen36” H x 48” W is 1,728 square inches or 12 square feet withthe MSRP of $248.00.

SINGLE PANEL

FIREPLACE

SAFETY

SCREEN

STANDARD

SIZEUp to 9 Square

Feet MSRP

Over 9

Square Feetper square foot

ADDERAdd to

STANDARDMSRP

FLAT withFrame Footing

$197 $20.00

CURVED (Bow) $197 $20.00

Single Panel Fireplace Screen with

Steel Footing or Bow (Curve)

• Aspen Industries Fireplace Screens are welded high

grade steel mesh and bar stock and have a high

heat-resistant electrostatically applied, black finish

• Handle(s) welded to top frame

• Maximum Size 48” x 48”

HEIGHT

WIDTH

INSIDE FEET

7” in from End

FIREPLACE GRATES

PRODECT INDEX

Original Owner Warranty:Aspen Industries, Inc. warranties its Fire Pits, Fire Pit Safety Screens andFire Grates, to the original owner, against breakage (except breakage dueto mishandling and abuse) for 12 months from the date of consumer pur-chase. No warranty on paint – normal weathering and some discolorationmay occur depending upon materials burned. Scratched or exposed metalwill oxidize and discolor. Shipping not included.

Original Owner Warranty:Aspen Industries, Inc. warranties its Gas Burner Assemblies, to the

original registered owner, against breakage (except breakage due to mishandling and abuse) for life. Aspen Industries, Inc. warranties itsfactory installed pilot valves, controls, accessories and logset to itsowner, against any performance defects for a period of 1 year fromthe date of consumer purchase. Shipping not included. WARRANTY REGISTRATION IS REQUIRED.

Fire Pit, Screen & Grate WARRANTY

Gas Log and Burner WARRANTY

Master Flame Fire Pits and Accessories

• Lift Off Dome Fire Pit Screens 1• Round Hinged Fire Pit Screens 2• Square and Rectangular Hinged Fire Pit Screens 3• Square LOW PROFILE Hinged Fire Pit Screens 4• Pivot Model Fire Pit Screens 5• Fire Pit Grates 7• Fire Pit Poker 8• Fire Pit Covers and Snuffers 9• Square-Rectangular Welded Steel Fire Pits 10• Round Fire Bowl Welded Steel Fire Pits 11

Gas Coal-Effect Burner System

• Royal Coal Effect Burner System 12

Master Flame Gas Log Burner Systems and Logs

• Elite Triple Burner with Logs 13• Elite Gemini “See-Thru” 5 Burner with Logs 15• Single Burner with Logs 15• Outdoor Stainless Steel Two Burner with Logs 16• Outdoor Stainless Steel Three Burner with Logs 16• Log Kits 16

Fireplace Grates and Screens

• Standard Fireplace Grate 17• Rectangular Fireplace Grates 17• Fireplace Screens 18

CUSTOM Welded Products

• Custom Design Burners 19• Custom Design Screens 19








Aspen Industries, Inc.Master Flame ProductsBensenville, IL 60106Voice: 630-238-0611Toll Free: 800-642-7254Fax: [email protected]

CUSTOM Fire Pit Screens

CUSTOM Fireplace Screens

CUSTOM BurnersWELDED STEEL PRODUCTS MADE TO SPECIFICATION:

Custom is referred to as any product notlisted in the Aspen Industries, Inc. currentprice list.

To quote a Custom Unit Order we will need a drawing with specifications.

Aspen Industries Custom Order Department

has manufactured many types of welded

steel hearth, fireplace and fire pit product,

including burners, fire grates, burner and

grate systems, burner and pan system, “fire

and ice” type burner / shallow pan, fireplace

screens as well as unique fire pit screens

with special handle and access locations.

Authorized Dealers are listed onour website:

www.masterflamegaslogs.com

TERMS & CONDITIONS PAYMENT TERMS:

1% 10, NET 30 DAYS. Late charges 2% per monthon payments beyond terms.

FREIGHT: F.O.B. Bensenville, IL

PRICE POLICY: All prices are subject to changewithout notice. Orders are subject to credit approvalat time of placement.

CREDIT CARDS:Aspen Industries, Inc. accepts Visa and Mastercard for Invoice payments (2% added to invoice).

RETURNS:A Returned Goods Authorization (RGA) is requiredprior to return of material. There is a 20% restocking fee for all returned goods.

Master Flame™Customized Welded SteelProductsCUSTOM PRODUCTS

http://www.masterflamegaslogs.com/index.html



Master Flame Fire Pit Screens, Fire Grates, All-Steel Fire ...

Documents

Transcript of Master Flame Fire Pit Screens, Fire Grates, All-Steel Fire ...