Aluminum Grates and Grilles Architectural Bronze Grates and … · 2019. 10. 10. · Kadee...
Transcript of Aluminum Grates and Grilles Architectural Bronze Grates and … · 2019. 10. 10. · Kadee...
Stainless Steel Grates and Grilles
Aluminum Grates and Grilles
Architectural Bronze Grates and Grilles
Aluminum Roll-Out Mat Systems
Aluminum Entrance Grid Systems
Our Distinctive, Quality Product Line:
T H E L E A D E R I N S TA I N L E S S S T E E L G R AT I N G S Y S T E M S A N D E N T R A N C E M AT S
Spec Sections 12 48 13 12 48 16 12 48 23KD98
1-1/8” Stainless Steel Grating
KD58 5/8” Stainless Steel Grating
KD383/8” Stainless Steel Grating
ENTEC3/8” & 5/8” Stainless Steel Grating with Carpet Inserts
KDALAluminum Bar Grating
KDBRBronze Bar Grating
KDCM & KDVMAluminum Roll-Out Entrance Mats
KDCP & KDVPAluminum Entrance Grids
SSS Clean Tread™1 1/8” STAINLESS STEEL GRATING
MODEL KD98
Applications
Specifications
Section 12 48 16 Entrance Floor Grilles
Furnish and install SSS Clean Tread KD98 Stainless Steel Grating as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction:
Tread Material manufactured from Type 304 Stainless Steel .071” x .177” surface wires spaced with a .125” slot opening and resistance welded to .070” x 1.0” Type 304 Stainless Steel support rods spaced 1” on center.
Construction Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden or visual locking devices are provided to fasten grating.
Framing 6063-T6 Extruded Aluminum or Type 304 Stainless Steel. Custom pit liners are available in aluminum or stainless steel for drainage or evaporation applications.
Warranty 5 years - details on back cover.
Specifically designed to span up to 3’0” without supports, with the ability to withstand a live load of 500 lbs. per square foot. Perfect for drains and trenches.
Wires are evenly spaced providing safe support for high heels, canes, wheelchairs, crutches and other walking aids.
Custom designs available to fit almost any application.
59.9% air flow, great for registers.
Self-cleaning design reduces regular maintenance costs.
Slip Resistant with a minimum Coefficient of Friction of 0.6 in dry and wet testing.
ENTRANCE GRILLES: LEVEL BED AND PIT APPLICATIONSTRENCH DRAIN GRILLESTREE GRATESFOUNTAIN / POOL GRATESREVOLVING DOORSAIR GRILLES
Durable, Practicalwith the long-lasting beauty of stainless steel
S A F E , S E L F - C L E A N I N G , S TA I N L E S S S T E E L E N T R A N C E S Y S T E M S
LEED InformationEnvironmental concerns are an important consideration to specifiers making material selections for products. Stainless steel’s long service life and 100% recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Grating is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.
KD98 SS Grating SS Drainage Pit Frames KD98 SS Grating SS Level Bed
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-2-
Section A & E Section A & E
LEED InformationEnvironmental concerns are an important consideration to specifiers making material selections for products. Stainless steel’s long service life and 100%recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Grating is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.
SSS Clean Tread™5/8” STAINLESS STEEL GRATING
ApplicationsENTRANCE GRILLES: LEVEL BEDAIR GRILLESLIGHT DIFFUSERSREVOLVING DOORSCEILING AND WALL APPLICATIONS
S A F E , S E L F - C L E A N I N G , S TA I N L E S S S T E E L E N T R A N C E S Y S T E M S
MODEL KD58
Specifications
Section 12 48 16 Entrance Floor Grilles
Furnish and install SSS Clean Tread Model KD58 Stainless Steel Grating as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction:
Tread Material manufactured from Type 304 Stainless Steel .071” x .177” surface wires spaced with a .125” slot opening and resistance welded to .070” x 0.5” Type 304 Stainless Steel support rods spaced 1” on center.
Construction Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden or visual locking devices are provided to fasten grating.
Framing 6063-T6 Extruded Aluminum or Type 304 Stainless Steel. There are custom-made pit liners available in aluminum or stainless steel for drainage or evaporation applications.
Warranty 5 years - details on back cover.
Multiple Uses,designed to meet a variety of needs.
Designed for shallow, level bed recessed applications for new construction or renovation.
Wires are evenly spaced providing safe support for high heels, canes, wheelchairs, crutches and other walking aids.
Custom designs available to fit almost any application.
59.9% air flow, great for registers.
Self-cleaning design reduces regular maintenance costs.
Slip Resistant with a minimum Coefficient of Friction of 0.6 in dry and wet testing.
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-3-
KD383/8” STAINLESS STEEL GRATINGThe KD38 is similar to the model KD58, but at 3/8” thickness. It is an excellent alternative to aluminum or vinyl entrance mats, with a much longer life and lower maintenance. KD38 was designed as an ideal replacement or upgrade to standard worn out roll-out mats.
KD58 SS Grating SS Frame KD58 SS Grating Aluminum Frame
Section A & E Section A & E
SSS Clean Tread™5/8” STAINLESS STEEL GRATING WITH CARPET INSERTS
MODEL ENTEC-58™
Applications
ENTRANCE GRILLES: LEVEL BED APPLICATIONS
S A F E , S E L F - C L E A N I N G , S TA I N L E S S S T E E L E N T R A N C E S Y S T E M S
Section 12 48 16 Entrance Floor Grilles
Furnish and install SSS Clean Tread Model ENTEC™-58 Stainless Steel Grating as manufac-tured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction:
Tread Material manufactured from Type 304 Stainless Steel .090” x .172” surface wires spaced with a .145” slot opening and resis-tance welded to .125” x .500” stainless steel support rods spaced 2” on center and 1-3/8” wide x .036” formed stainless steel tread insert channels spaced 4” on center.
Construction Each juncture of surface wires to support rods shall have electric resistance welded joints. Hidden locking devices are provided to fasten grating.
Framing 6063-T6 Extruded Aluminum or Type 304 stainless steel.
Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fibers fusion bonded to a polypropylene backing. -Heavy Duty Carpet Inserts: Polypropylene fibers fusion bonded to a polypropylene backing.
Warranty 5 years - details on back cover.
The Ultimate Entranceway Solution for a Distinctive and Decorative AppearanceThe grating is a combination of stainless steel surface wires, which create a cleaning/scraping process, along with carpet inserts spaced every 4” on center, to clean and dry shoe traffic.
Designed for shallow recessed applications for new construction or renovation.
Self-cleaning design reduces regular maintenance costs.
Wires are evenly spaced providing safesupport for high heels, wheelchairs, crutches, canes and other walking aids.
Custom designs available to fit almost any application.
LEED InformationEnvironmental concerns are an important consideration to specifiers making material selections for products. Stainless steel’s long service life and 100 percent recyclability make it an excellent environmental performer. Kadee Industries’ SSS Clean Tread Stainless Steel Grating is manufactured from stainless steel comprised of 80% post consumer recycled content and 15% pre-consumer recycled content.
Specifications
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-4-
ENTEC-383/8” STAINLESS GRATING
Similar to the model ENTEC-58, but at 3/8” thickness. Excellent alternative to aluminum or vinyl entrance mats, with a much lon-ger life and lower maintenance. ENTEC-38 was designed as an ideal replacement or upgrade to standard aluminum roll-out mats.
Entec-58 SS Grating SS Frame Entec-58 SS Grating Aluminum Frame
Section ASection A
Designed for level bed or pit applications.
Self cleaning design limits tracked-in dirt or mud.
Designed for 50% free air flow, making this ideal for air registers.
All metal tread bar design eliminates carpet maintenance.
Custom designs available to fit almost any application.
Bar Clean Tread™ALUMINUM BAR GRATING AND BRONZE BAR GRATING
MODELS KDAL & KDBR
Applications
ENTRANCE GRILLES: LEVEL BED OR PIT APPLICATIONSAIR GRILLESLIGHT DIFFUSERSCEILING AND WALL APPLICATIONS
S E L F - C L E A N I N G B A R G R AT I N G , E N T R A N C E M AT S & A I R G R I L L E S
Section 12 48 16 Entrance Floor Grilles
Furnish and install Bar Clean Tread Model KDAL, Aluminum Bar Grating as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction
Tread Bars manufactured from 6063-T6 Extruded Aluminum with 1.175” x .25” tread bars. Tread bar surface is provided with round grove contours for improved cleaning action, running the length of the bar.
Construction Tread Bars are assembled withstainless steel rods, stainless steel nuts and nylon 66 spacers with a .25” max. slot opening.
Framing 6063-T6 Extruded Aluminum. Custom pit liners are available in aluminum for drainage and evaporation applications.
Finish Standard mill and Clear Anodized finish available for KDAL.
Warranty 2 years - details on back cover.
LEED InformationAluminum is a unique metal: durable, flexible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Bar Clean Tread Aluminum Grating is manufactured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.
Specifications
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-5-
KDAL Aluminum Frame Drainage Pit Application KDAL Aluminum Frame Level Bed Application
Economical, Lightweight Aluminum Grating Sections They’re easy to handle, and hold-up well in numerous installations. As one of our most economical products, Kadee’s aluminum grating only requires occasional mopping and can be lifted to remove dirt which has collected beneath the non-clogging tread bars, making this product virtually maintenance free.
KDBR
ARCHITECTURAL BRONZE BAR GRATING
Have your next project reflect the added luxury and prestige of Kadee’s Architectural Bronze Grating. When style, functionality and durability are of the ut-most importance, be sure to specify KDBR Architectural Bronze Grating. The construction of the KDBR is similar to the KDAL, with .8125” x .25” tread bars. Available with architectural bronze angle framing.
Add Beauty and Elegance to Your Design
Section A & E Section A & E
Mat Clean Tread™ ALUMINUM ROLL-OUT MAT WITH CARPET OR VINYL INSERTS
MODELS KDCM & KDVM
ApplicationsENTRANCE MATS:SHALLOW RECESS WITH FRAMESURFACE MOUNTED WITH VINYL RAMPS
H I G H Q U A L I T Y, L O W C O S T A L U M I N U M R O L L - O U T E N T R A N C E M AT S Y S T E M S
Specifications
LEED InformationAluminum is a unique metal: durable, flexible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Mat Clean Tread Aluminum Mats are manufactured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.
Section 12 48 13 Entrance Floor Mats
Furnish and install Mat Clean Tread Model KDCM or KDVM, Aluminum Roll-Out Entrance Mats as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction:
Tread Rails manufactured from 6063-T6 Extruded Aluminum with tread rails spaced on 1-1/2” on center. Tread Rails are connected with vinyl hinges and sit on vinyl cushions with optional drainage holes.
Framing 6063-T6 Extruded Aluminum. Optional tapered vinyl ramps, for surface mounted units.
Finishes Standard mill. Anodized finishes available upon request.
Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fibers fusion bonded to a polypropylene backing. -Heavy Duty Carpet Inserts: Polypropylene fibers fusion bonded to a polypropylene backing.
Vinyl Serrated, nonslip surface with a convex design for improved drainage.
Warranty 2 years - details on back cover.
The High Qualitylow cost alternative
Reduces tracked-in dirt, slush, and mud.
Ball and socket hinge design allows for easy roll-up for cleaning.
Inserts closely spaced to prevent crutch tips and canes from catching.
Vinyl hinges eliminate metal-to-metal rattle and corrosion lockup.
Custom designs available to fit almost any application.
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-6-
KDCM Vinyl RampsKDCM Aluminum Frame
Section ASection A
Arc Clean Tread™ ALUMINUM GRID WITH CARPET OR VINYL INSERTS
MODELS KDCP & KDVP
ApplicationsENTRANCE GRIDS:LEVEL BED OR PIT APPLICATIONS
P R A C T I C A L & E C O N O M I C A L A L U M I N U M E N T R A N C E G R I D S Y S T E M S
Specifications
LEED InformationAluminum is a unique metal: durable, flexible, lightweight, corrosion-resistant and 100% recyclable. Kadee Industries’ Mat Clean Tread Aluminum Entrance Grids are manufactured from extruded aluminum comprised of 32.5% post-consumer recycled content and 32.5% pre-consumer recycled content.
Section 12 48 23 Entrance Floor GridsFurnish and install Arc Clean Tread KDCP or KDVP Entrance Floor Grids as manufactured by Kadee Industries, Walton Hills, Ohio. Phone: (800) 321-3827
Construction:Tread Rails manufactured from 6063-T6 aluminum with tread rails spaced 1-1/2” on center with 2” drainage slots spaced 6” on center. Tread rail sections sit on vinyl cushions. Framing 6063-T6 Extruded Aluminum. Custom pit liners are available in aluminum for drainage and evaporation applications.
Finishes Standard mill and Clear Anodized finish available upon request.
Carpet -Nylon Carpet Inserts: 100% Nylon 6 carpet fibers fusion bonded to a polypropylene backing. -Heavy Duty Carpet Inserts: Polypropylene fibers fusion bonded to a polypropylene backing.
Vinyl Serrated, nonslip surface with a convex design for improved drainage.
Warranty 2 years - details on back cover.
Practical and Economical
Reduces tracked-in dirt, slush, and mud.
Available for level bed or pit applications.
Drainage slots keep dirt and water away from walking surface.
Inserts closely spaced to prevent crutch tips, high heels and canes from catching.
Custom designs available to fit almost any application.
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 27160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
7160 Krick Rd • Walton Hills, OH 44146 • (800) 321-3827 Ph. • (440) 439-6889 Fax • www.kadeeindustries.com • [email protected]
-7-
KDCP Aluminum Frame Pit Application KDCP Aluminum Frame Level Bed Application
Section ASection A & E
Product WarrantyKadee Industries warrants to its purchasers that any product will be free from defects in material workmanship. The liability of Kadee Industries is strictly limited to the repair or replacement of units that, in the opinion of the factory, were properly applied and installed and subsequently found to be defective. No claims for consequential damages of any nature will be allowed. This warranty is in lieu of all other warranties, expressed or implied.
Kadee Industries reserves the right to make product changes or withdraw any design without notice.
For More Product InformationKadee Industries is the leader in stainless steel grating and entrance flooring solutions. With over a half century of product design, development and fabrication, our team is uniquely qualified to provide high quality products at competitive prices. If you have any questions or comments or require further documentation, please contact us at (800) 321-3827 or via email at [email protected].
Entrance Grating:
- Cadillac Dealerships - Newseum - Washington, DC
- Constitution Center - Washington, DC - New York City Schools
- Cannon America Headquarters - Melville, NY - GSA/FDA Consolidation at White Oak
- Comcast Center - Philadelphia, PA - U.S. Courthouse - Seattle, WA
- U.S. Courthouse - San Diego, CA - Zuellig Building - Makati City, Philippines
- IFC - United Arab Emirates
Trench Drains:
- Chicago Transit Stations - Dallas Cowboy Training Center - Irvine, TX
- Sea World - Orlando, FL - Cornell Univ. - Life Science & Tech. Ctr. - Ithaca, NY
-409 & 499 Illinois Street - San Francisco, CA
Air Grilles:
- Carnegie Hall - New York, NY - George W. Bush Presidential Center - Dallas, TX
- Howard Hughes Medical Center - Chevy Chase, MD - CalPERS Headquarters - Sacramento, CA
- Robert Wood Johnson Univ. Hospital - Hamilton, NJ - Princeton University - Chemistry Building - Princeton, NJ
Fountain Grating:
- Crown Fountain at Millennium Park - Chicago, IL - World War II Memorial - Washington, DC
- North End Parks - Boston, MA - San Jose Civic Center
- Marvell - US HQ Santa Clara, CA - Houdini Plaza - Appleton, WI
LEED Information Kadee Industries’ manufacturing policies and procedures create products compliant with the sustainability requirements of the USGBC LEED for new construction and major renovations and contribute to various LEED Credits. Kadee Industries is a member of the U.S. Green Building Council. For more information, please feel free to visit our website www.kadeeindustries.com or contact us by email: [email protected]
7160 Krick Rd • Walton Hills, Ohio 44146 • (440) 439-8650 Phone • (440) 439-6889 Fax • www.kadeeindustries.com 2
KADEE GRATING SYSTEMS ARE USED AROUND THE WORLD
Toll Free: (800) 321-3827Phone: (440) 439-8650Fax: (440) 439-6889
Email: [email protected]: www.kadeeindustries.com
7160 Krick Road, Walton Hills, Ohio 44146
T H E L E A D E R I N S TA I N L E S S S T E E L G R AT I N G S Y S T E M S A N D E N T R A N C E M AT S
© 2019 KADEE INDUSTRIES PRINTED IN THE U.S.A.