MARTINI YOULED ENG PART 2 2011
-
Upload
lba-consulting -
Category
Documents
-
view
231 -
download
0
description
Transcript of MARTINI YOULED ENG PART 2 2011
252
The most innovative LED light source in an aluminium shell.
design: Ettore Fantasia
Last minute! Dome LED
254
Pendant fi xturesDome
Pendant fi xtures comprised of a steel bell that houses a plate containing the heat sink, optic and power supply for the power LED ARRAY:Various beam opening angles are available based on the power of the LED ARRAY.Complete with steel suspension cables with micrometric adjustment without the need for tools and power supply cable with ceiling rose.
General features and technical details
255
General features and technical details
3 sizes:380cm 22W450cm 25W620cm 50W
6 fi nishes:whiteblackcortenbronze
light greydark grey
Pendant fi xturesDome
IP40
IP40
Ø 380
max
250
025
6
Ø 380
max
250
025
6
11
82
2715
79 86
257
technical sheetsDome
Description LED powerColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 380
22W 82 15° / 50210.____
22W 82 22° / 50211.____
22W 82 40° / 50212.____
Description LED powerColour
temperatureColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 380
22W Warm white 97 15° / 50213.__WW
22W Warm white 97 22° / 50214.__WW
22W Warm white 97 40° / 50215.__WW
add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50210.11NW)
IP40
IP40
Ø 450
max
250
034
5
Ø 450
max
250
034
5
258
technical sheetsDome
Description LED powerColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 450
25W 82 15° / 50222.____
25W 82 22° / 50223.____
25W 82 40° / 50224.____
Description LED powerColour
temperatureColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 450
25W Warm white 97 15° / 50225.__WW
25W Warm white 97 22° / 50226.__WW
25W Warm white 97 40° / 50227.__WW
add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50222.11NW)
Ø 620
max
250
042
5
Ø 620
max
250
042
5
IP40
IP40
259
technical sheetsDome
Description LED powerColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 620
50W 82 18° / 50234.____
50W 82 35° / 50235.____
50W 82 45° / 50236.____
Description LED powerColour
temperatureColour
renderingBeam W [Kg] Code Technical drawing [mm]
Dome 620
50W Warm white 97 18° / 50237.__WW
50W Warm white 97 35° / 50238.__WW
50W Warm white 97 45° / 50239.__WW
add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50234.11NW)
261
Cut LEDsetting
General features and technical details
Linear system recessed into false ceilings and consisting of an extruded aluminium profile.Available in fixed-size modules of various lengths or as a modular system to be assembled as required.The closing screen is made of satin-finish polycarbonate. IP43 protection rating.
IP20
11
235 - 635 - 835 - 123524
5150
5575
80
215
235
250
270
3827
112
262
technical sheets: fi xed-size modulesCut LED
Description Voltage LED power L [mm] W [kg] Code Technical drawing [mm]
Cut
24 VDC 0.75 W 235 0.50 31885.11__
24 VDC 2.20 W 635 1.20 31886.11__
24 VDC 2.90 W 835 1.70 31887.11__
24 VDC 4.35 W 1235 2.20 31888.11__
add the fi nish colour to the code and the suffi x CW (Cool White) or WW (Warm White) to select the colour temperature (e.g.: 31588. 11CW)complete fi xture; to operate the latter, the ballast must be ordered (available as an accessory)
Description Code Picture Technical drawing [mm]
IP40 electronic ballast110-240/24 VDC 20 W
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 16 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 W
38935.00
Optional accessories
24
51
263
technical sheets: modular systemCut LED
components for assembling the luminous channel
Description Code Picture
3.6 W/m LED strip (3,000K) 31890.00
3.6 W/m LED strip (6,500K) 31891.00
RAL 9010 white-coated extruded aluminium structure (L=2,000 mm)
31895.11
RAL 9010 white-coated extruded aluminium structure (L=3,000 mm)
31896.11
opal acrylic screen (L=2,000 mm) 31898.00
opal acrylic screen (L=3,000 mm) 31899.00
white-coated extruded end cap (2-piece pack)
31897.11
Description Code Picture
adhesive PVC profile for fixing the LED strip
31889.00
electrical connector with 5-metre long cable
31892.00
IP junction for connection 31893.00
linear connection with flexible cable 31894.00
265
Fixed recessed fi xture made of anodised aluminium - IP44.Transparent polycarbonate screen.Available in versions for either series or parallel wiring.
General features and technical details
fi xedStralis recessed
266
Recessed adjustable fi xture made of anodised aluminium with IP20 optical compartment.Transparent polycarbonate screen.Available in versions for either series or parallel wiring.
General features and technical details
adjustableStralis recessed
21
Ø 4
1.5
Ø 4
1.5
Ø 2
5Ø
25
5151
Ø 34
Ø 34
Ø 35
Ø 35
2222
4040
118
118
112
112
IP44
IP44
267
technical sheets: fi xed recessed, constant current at 350 mA or 700 mA.Stralis fi xed recessed
Light source Wattage Beam W [kg] Code Technical drawing [mm]
White LED * 1 W - 3 W 10° 0.15 34890.21__
Blue LED 1 W - 3 W 10° 0.15 34891.21
Amber LED 1 W - 3 W 10° 0.15 34892.21
Green LED 1 W - 3 W 10° 0.15 34894.21
Red LED 1 W - 3 W 10° 0.15 34895.21
Light source Wattage Beam W [kg] Code Technical drawing [mm]
White LED * 1 W - 3 W 60° 0.15 34870.21__
Blue LED 1 W - 3 W 60° 0.15 34871.21
Amber LED 1 W - 3 W 60° 0.15 34872.21
Green LED 1 W - 3 W 60° 0.15 34874.21
Red LED 1 W - 3 W 60° 0.15 34875.21
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240V/350 mA DC.suitable for controlling up to 12 fi xtures connected in series
35188.00
IP40 electronic ballast230-240V/700 mA DC.suitable for controlling up to 5 fi xtures connected in series
35189.00
inclusive of terminals for series wiringNote: if powered at 350 mA = 1W, if powered at 700 mA = 3W
inclusive of terminals for series wiringNote: if powered at 350 mA = 1W, if powered at 700 mA = 3W
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 34890.21WW)
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 34870.21WW)
Optional accessories
electronic ballast available as accessory
electronic ballast available as accessory
21
Ø 4
1.5
Ø 4
1.5
Ø 2
5Ø
25
5151
Ø 34
Ø 34
Ø 35
Ø 35
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP44
IP44
268
technical sheets: fi xed recessed, 12V constant voltageStralis fi xed recessed
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 10° 0.15 35170.21.Y
Blue LED 12 VDC 1 W 10° 0.15 35171.21.Y
Amber LED 12 VDC 1 W 10° 0.15 35172.21.Y
Green LED 12 VDC 1 W 10° 0.15 35174.21.Y
Red LED 12 VDC 1 W 10° 0.15 35175.21.Y
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 60° 0.15 35160.21.Y
Blue LED 12 VDC 1 W 60° 0.15 35161.21.Y
Amber LED 12 VDC 1 W 60° 0.15 35162.21.Y
Green LED 12 VDC 1 W 60° 0.15 35164.21.Y
Red LED 12 VDC 1 W 60° 0.15 35165.21.Y
to be powered at 12 VDC constant voltage; system power 2.5 W; inclusive of terminals for parallel wiring
to be powered at 12 VDC constant voltage; system power 2.5 W; inclusive of terminals for parallel wiring
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 6 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 28 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 20 fi xtures
38920.00
electronic ballast available as accessory
electronic ballast available as accessory
21
Ø 4
1.5
Ø 4
1.5
Ø 2
5Ø
25
5151
Ø 34
Ø 34
Ø 35
Ø 35
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP44
IP44
269
technical sheets: fi xed recessed, 12V constant voltageStralis fi xed recessed
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 3 W 10° 0.15 35196.21.Y
Blue LED 12 VDC 3 W 10° 0.15 35197.21.Y
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 3 W 60° 0.15 35190.21.Y
Blue LED 12 VDC 3 W 60° 0.15 35191.21.Y
to be powered at 12 VDC constant voltage; system power 4.5 W; inclusive of terminals for parallel wiring
to be powered at 12 VDC constant voltage; system power 4.5 W; inclusive of terminals for parallel wiring
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 3 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 15 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 11 fi xtures
38920.00
electronic ballast available as accessory
electronic ballast available as accessory
21
Ø 4
1.5
Ø 2
551
Ø 34
Ø 35
2240
118
112
IP20
270
technical sheets: adjustable recessed, 350 mA constant currentStralis adjustable recessed
Light source Wattage Beam W [kg] Code Technical drawing [mm]
White LED * 1 W 120° 0.15 35180.21__
Blue LED 1 W 120° 0.15 35181.21
Amber LED 1 W 120° 0.15 35182.21
Green LED 1 W 120° 0.15 35184.21
Red LED 1 W 120° 0.15 35185.21
to be powered with 350 mA constant current, inclusive of terminals for in-series wiring
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 35180.21WW)
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240V/350 mA DC.suitable for controlling up to 12 fi xtures connected in series
35188.00
Optional accessories
electronic ballast available as accessory
21
Ø 4
1.5
Ø 2
551
Ø 34
Ø 35
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP20
271
Stralis adjustable recessedtechnical sheets: adjustable recessed, 12 V constant voltage
Light source Wattage Beam W [kg] Code Technical drawing [mm]
Cool White LED 1 W 120° 0.15 35180.21.Y
Blue LED 1 W 120° 0.15 35181.21.Y
Amber LED 1 W 120° 0.15 35182.21.Y
Green LED 1 W 120° 0.15 35184.21.Y
Red LED 1 W 120° 0.15 35185.21.Y
to be powered with 12 VCC constant voltage; system power 2.5 W; inclusive of terminals for parallel wiring
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 6 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 28 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 20 fi xtures
38920.00
electronic ballast available as accessory
272
Communicating through sober forms, refined finishes and environmental awareness, while creating atmospheres of light.
design: Studio Archea
New! Tube GM LED
273
Tube GM LEDthe ceiling-mounted fixtures
General features and technical details
A family of aluminium fixtures in the pendant and ceiling-mounted versions, equipped with the new GM LED 50 technology. Available with 80, 120, 150 cm length and 52 mm diameter.
274
the pendant fixturesTube GM LED
General features and technical details
The die-cast aluminium optical assembly houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a flow of convective air that brushes the 15,931 mm2 dissipating surface, and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance faceted aluminium optic for 32° beam opening angles.Available with 80, 120, 150 cm length and 52 mm diameter.
10
16
14
34
IP20
IP20
12
25
max
. 150
0m
ax. 1
500
800
/ 120
0 / 1
500
800
/ 120
0 / 1
500
Ø 52
Ø 52
278
technical sheetsTube GM LED
Description LED powerColour
renderingBeam Length [mm] W [kg] Code Technical drawing [mm]
Tubependant
6 W 82 32° 800 1.40 50190.____
6 W 82 32° 1200 1.80 50192.____
6 W 82 32° 1500 2.20 50194.____
Description LED powerColour tem-
peratureColour
renderingBeam Length [mm] W [kg] Code Technical drawing [mm]
Tubependant
6 W Warm White 97 32° 800 1.40 50191.__WW
6 W Warm White 97 32° 1200 1.80 50193.__WW
6 W Warm White 97 32° 1500 2.20 50195.__WW
integrated electronic control gear
integrated electronic control gear
add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50190.10NW)
10
16
14
34
IP20
IP20
12
25
800
/ 120
0 / 1
500
800
/ 120
0 / 1
500
Ø 52
Ø 52
279
technical sheetsTube GM LED
Description LED powerColour
renderingBeam Length [mm] W [kg] Code Technical drawing [mm]
Tubeceiling-mounted
6 W 82 32° 800 1.40 30190.____
6 W 82 32° 1200 1.80 30192.____
6 W 82 32° 1500 2.20 30194.____
Description LED powerColour tem-
peratureColour
renderingBeam Length [mm] W [kg] Code Technical drawing [mm]
Tubeceiling-mounted
6 W Warm White 97 32° 800 1.40 30191.__WW
6 W Warm White 97 32° 1200 1.80 30193.__WW
6 W Warm White 97 32° 1500 2.20 30195.__WW
integrated electronic control gear
integrated electronic control gear
add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30190.10NW)
280
Highly compact recessed fixture for path marking that mounts high-efficiency LEDs.
design: Martini Staff
Roof LED
See also outdoor section page 430
281
Recessed fixture made of die-cast aluminium subjected to anti-rust treatment and coated with water-based paint that ensures a 90% reduction in the use of solvents.Inclusive of stainless steel springs for installation on plasterboard walls. Recess box for installation on solid walls supplied separately.Two colours: white and grey.
General features and technical details
recessed fixturesRoof LED
11 82
78×78 204×188×70
IP40LEDCool
White (CW)
1W
2838
.5
118
112
5075
215
250
85
6810
6×10
6
1949
6017
8
110
45
52
90
90
284
technical sheetsRoof LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.20 38900.__
Blue LED 12 VDC 1 W 0.20 38901.__
Amber LED 12 VDC 1 W 0.20 38902.__
Green LED 12 VDC 1 W 0.20 38904.__
Red LED 12 VDC 1 W 0.20 38905.__
Plasterboard drilling Solid wall drilling
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling 12 fixtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling 50 fixtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling 35 fixtures
38920.00
recess box for solid walls 38908.00
recess box for concrete 38909.00
electronic ballast available as accessory
11 82
78×78 204×188×70
Plasterboard drilling Solid wall drilling
IP40LED
NeutralWhite (NW)
4W
5055
7580
215
235
250
270
1949
6017
838
27
112
115
45
52
90
90
285
technical sheetsRoof LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
White LED 24 VDC 4 W 0.20 78870.____
add the suffix NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 78870.82NW)
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 4 fixtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 16 fixtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 30 fixtures
38935.00
recess box for solid walls 38908.00
recess box for concrete 38909.00
electronic ballast available as accessory
286
An elegant solution featuring extremely simple installation, also in the emergency version.
design: Davide Cavalli
503 LED
287
Plastic die-cast body and frame, sanded methacrylate diffuser with metal insert to screen the LED light source. Integrated power circuit to be installed in a standardised 503 box.Available with 12V or 220V power.Emergency version with 1-hour lifespan and status signalling LED.
General features and technical details
503 LEDpath marker and emergency
728
116
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP40
LEDCool
White (CW)
2,5W
288
technical sheets503 LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 V 1 W 0.20 38940.00
Blue LED 12 V 1 W 0.20 38941.00
Amber LED 12 V 1 W 0.20 38942.00
Green LED 12 V 1 W 0.20 38944.00
Red LED 12 V 1 W 0.20 38945.00
system power 2.5 W
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 6 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 28 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 20 fi xtures
38920.00
electronic ballast available as accessory
728
116
728
116
IP40
IP40
system power 3.6 W
LEDCool
White (CW)
2,5W
LEDCool
White (CW)
2,5W
289
technical sheets503 LED
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 1 W 0.30 38710.00
Blue LED 1 W 0.30 38711.00
Amber LED 1 W 0.30 38712.00
Green LED 1 W 0.30 38714.00
Red LED 1 W 0.30 38715.00
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 1 W 0.30 38980.00
fixture with 1-hour continuous emergency operation
system power 2.5 W
291
Steel fi xture coated with water-based paint that ensures a 90% reduction in the use of solvents.LED light sources placed on the corners of the fi xture for uniform, grazing illumination of the PMMA diffuser screen.Status signalling LED on the side of the fi xture.Includes batteries and inverter, 1-hour lifespan.
General features and technical details
wall-mountedEden LED
200 40
200
IP40
11 82
LEDCool
White (CW)
7W
292
technical sheetsEden LED
Optional accessories
Description LED power W [kg] Code Technical drawing [mm]
4 Cool White LEDs 7W 1.00 38981.__
4 Cool White LEDs * 7W 1.50 38978.__
Description Code Picture
emergency exit to the right 200×200 93410.00
emergency exit ahead 200×200 93411.00
emergency exit to the left 200×200 93412.00
emergency stairs 200×200 93415.00
* fixture with 1-hour continuous emergency operation
integrated electronic control gear
SALIDA DEEMERGENCIA
NOTAUSGANG
EMERGENCYEXIT
ISSUE DE S E C O U R S
USCITA DIS I C U R E Z Z A
300 40
150
IP40
11 82
LEDCool
White (CW)
7W
293
technical sheetsEden LED
Optional accessories
Description Code Picture
emergency exit to the right 150×300 93420.00
emergency exit ahead 150×300 93421.00
emergency exit to the left 150×300 93422.00
emergency exit 150×300 93423.00
emergency stairs 150×300 93425.00
Description Code Picture
emergency exit 150x300 93426.00
emergency exit 150×300 93427.00
emergency exit 150x300 93428.00
emergency exit 150×300 93429.00
Description LED power W [kg] Code Technical drawing [mm]
4 Cool White LEDs 7W 1.20 38982.__
4 Cool White LEDs * 7W 1.70 38979.__
* fixture with 1-hour continuous emergency operation
integrated electronic control gear
295
The track can withstand a 2 kg load per every 200 mm, with a maximum distance of 1,000 mm between the fi xing points. To achieve a load capacity of 5 kg per every 200 mm, the fi xing points must be 500 mm apart. Three-phase track, 16 A, Class 1 - conforms to the EN 60570 standards in force.Made of extruded aluminium, the track houses the wiring enclosed by two PVC extruded elements with high insulation resistance.
General features and technical details
recessed and pendantElectrifi ed tracks
11
11
21
82
27
27
33
36
80
120
120
120
80
80
120
60
120
296
technical sheets: ceiling-mounted / pendantElectrifi ed tracks
Length [mm] Code Technical drawing [mm]
1000 35061.__
2000 35062.__
3000 35063.__
4000 35064.__
Description Code PictureTechnical drawing
[mm]
right-hand control gear
35070.__
left-hand control gear
35071.__
central control gear and linear coupling
35065.__
right-hand T-shaped joining element
35072.__
left-hand T-shaped joining element
35073.__
X-shaped joining element
35077.__
internal L-shaped joining element
35067.__
external L-shaped joining element
35068.__
fl exible joining ele-ment
35066.__
wire strip L=120 mm 35078.00
Description Code PictureTechnical drawing
[mm]
linear joining ele-ment with contacts
35075.1135075.27
linear joining element without contacts
35076.1135076.27
ceiling attachment kit
35081.00
end cap 35080.__
track cover L=1000 mm
35079.1135079.27
steel suspension cable kit H=2000 mm, L=60 mm
35074.1135074.27
steel suspension cable kit H=2000 mm, L=120 mm
35069.1135069.27
Optional accessories
11
11
21
82
27
27
80
33
53
80
120
120
120
80
120
80
297
Electrifi ed trackstechnical sheets: recessed
Length [mm] Code Technical drawing [mm]
1000 35041.__
2000 35042.__
3000 35043.__
4000 35044.__
Description Code PictureTechnical drawing
[mm]
right-hand control gear
35045.__
left-hand control gear
35046.__
central control gear and linear coupling
35047.__
right-hand control gear
35070.__
left-hand control gear
35071.__
central control gear and linear coupling
35065.__
right-hand T-shaped joining element
35072.__
left-hand T-shaped joining element
35073.__
X-shaped joining element
35077.__
Description Code PictureTechnical drawing
[mm]
linear joining ele-ment with contacts
35075.1135075.27
linear joining element without contacts
35076.1135076.27
internal L-shaped joining element
35067.__
external L-shaped joining element
35068.__
end cap 35080.__
ceiling attachment kit
35048.00
track cover L=1000 mm
35079.1135079.27
fl exible joining ele-ment
35066.__
Optional accessories
Plasterboard cutting37 mm
Ø 100
Ø 130
Ø 105
max
30
32
60
298
Technical sheetsBased-mounted
Installation with baseInstallation with recessed basepurchase items 30618.11 and 30619.11 to order this accessory
Description Code Picture Diagram
adaptor with frame for base suitable for plasterboard installation 30619.11
ceiling and wall-mounting base 30618.11
302
The module is equipped with 15 LEDs powered at 350 mA for achieving the maximum possible performance with barely 17 W power.
Eye LED: the technology
Eye LED technology
+47%303
use of the technologyEye LED
use of the LED by Martini Light:
LED powered at 350 mA15 LEDs powered at 350 mA = 17 W1.1 W corresponds to 107 lm 107 lm multiplied by 15 LEDs:
total luminous fl ux = 1,605 lm
use of the LED by another manufacturer:
LED powered at 700 mA6 LEDs powered at 700 mA = 17 W2.5 W do not generate 267 lm, butcorrespond to 187 lm187 lm multiplied by 6 LEDs:
total luminous fl ux = 1,122 lm
304
Thermal project, effi ciency, watertight seal
The thermal project includes 17 turrets with X-shaped cross-section for optimal heat extraction.Cable gland in the rear section and tempered glass panel secured with silicone for achieving an IP65 protection rating for the LED module.
The projectEye LED
305
The Colour Rendering Index (CRI) of a light source indicates its ability to reproduce colours. The aver-age value indicated is unable to specify how the relevant light source reproduces specifi c colours in a broad colour range.In order to ensure greater clarity and provide at-tentive designers with a useful tool in selecting the best light source, we supply the colour rendering value of the single sample colours.
Colour rendering
CRIEye LED
308
The most evolved species for illuminating:New heat dissipation project.New arrangement of the LEDs. New LED powering system.New LED control system.
design: Martini Staff
New! Stilis LED
309
General features and technical details
Functional rhymes with beautiful. Each single detail has a specifi c technical function aimed at maximising performance. An innovative, round-shaped LED-based fi xture for street lighting with 500 mm diameter and 175 mm height. The body, the upper section of which is fi nned to increase the heat dispersion surface, is made of die-cast aluminium and includes a cap and bezel - both made of die-cast aluminium - secured to the body by means of stainless steel fi xing elements.
513Stilis LED
310
In order to prevent oxidation and corrosion, all parts that come into contact with the outside atmosphere are subjected to an anodising treatment then fi nished with a powder-coating treatment. The product is equipped with an IP 66 valve through which air is released in the event of overpressure. The valve contains a water-repellent membrane that fi lters incoming air from humidity (when the product turns off), so as to protect all the internal components (LEDs, driver, etc.). The LEDs are installed on a die-cast mould comprising 36 collimation points that allow for pointing the LEDs.
General features and technical details
513Stilis LED
311
Each of the 36 supports can house 1, 2 or 3 LEDs, therefore the product comes in either the 36, 72, or 108-LED version. The LEDs are arranged around the fi xture's external perimeter so as to use up the entire available surface and reduce the temperature on the LEDs to a minimum.The diffuser screen consists of a 3mm thick PMMA structure that can withstand Class IK08 mechanical shocks.
36, 72, 108 LEDs
The number of LEDsStilis LED
90°90°
90°
312
The geometric structure of the screen conforms to the direction of the LEDs so that it is always perpendicular to the incident light, thereby minimising loss of light due to refraction. The PMMA screen surface that diffuses the LED light beams has an ice-like appearance to ensure uniform illumination of the road surface (without luminous points) and conformity to the CEI EN 62471 standard regarding photobiological safety. The Class IP66 sealing of the above-mentioned components is guaranteed by silicone gaskets inserted into the profi les.
Design and effi ciency
Design and effi ciencyStilis LED
inclination of the LED chip planes
cross-sectional view of the Stilis PMMA screen
313
Programming the curves
The fi xture's electronic control system (driver) can be confi gured to adapt the current to the LEDs, which may be operate from 350 mA to 700 mA, depending on the model. Power is supplied to the LEDs through 3/6/9 independent channels (depending on the model) grouped according to the type of area to be illuminated. As a result, each LED group can be powered with different current levels so as to customise the light distribution according to the distance between fi xtures and the desired luminance levels. The 3/6/9 independent channels have a LED circuit confi guration based on SERIES wiring, in order to avoid current imbalances in the various branches. The fi xture's internal electronic system is able to automatically calculate when midnight falls, so that it can self-adjust in any time-zone condition.
programmingStilis LED
314
The light distribution can be customised as the power supplied to the LEDs is distributed on various channels, depending on the distance between the poles.
Flexibility and customisation.
programmingStilis LED
Perfectly
uniform illuminatio
n of the
road surfac
e thanks to the progr
amming
flexibility
of eac
h single
fixture.
Variou
s "lig
ht cov
erage"
areas
can b
e
obtai
ned w
ith di
fferen
t sett
ings.
315
Programming the fixtures over time
This function allows for operating the fixture in the “ENERGY SAVING” mode. Depending on the chosen profile (which is internally memorised), the fixture is able to automatically reduce the light flow according to the specific requirements of the road. The product complies with the relevant light pollution regulations as is has 0 emission beyond 90 degrees.
Stilis LEDprogramming
20:00 - 00:00 time period:100% of the programmed power
00:00 - 04:00 time period:40% of the programmed power
04:00 - 07:00 time period:70% of the programmed power
316
The architecture of the electronic structure of the Driver and the product's control section can be simply upgraded and reprogrammed for use with future generation LEDs. The product is able to memorise the settings concerning the operating profi les and all confi guration parameters relative to the LED operating currents (standard feature). The fi xture is confi gured (standard feature) for connection through a Wireless system with a PALMTOP touch-screen computer (available as an accessory), for modifying all the settings according to the user's own requirements.
Features:- 170 VAC to 260 VAC supply voltage, with the same lighting performance values.- Control gear (driver) with PF>0.9.- Self-restoring fuse for overcurrent protection.- Insulation Class II.- Conforms to ENEC specifi cations.- LED power adjustable in 10mA steps, from 350mA to 700mA (depending on the model).- Thermal protection system with current reduction if the maximum LED operating temperature is exceeded.- Power cable entry into the fi xture through a Class IP68 cable gland.- The product is equipped with a 10-metre long type-H07RN-F neoprene power cable (suitable for outdoor applications and conforming to safety standards), confi gured for connection to the pole or draw pit terminal board.- The following LED colour temperatures are available on request:5,000°K4,000°K3,400°K
Wireless programming
programmingStilis LED
317
An innovative, round-shaped LED-based fi xture for street lighting with 340 mm diameter and 115 mm height. The body, the upper section of which is fi nned to increase the heat dispersion surface, is made of die-cast aluminium and includes a cap and bezel - both made of die-cast aluminium - secured to the body by means of stainless steel fi xing elements. In order to prevent oxidation and corrosion, all parts that come into contact with the outside atmosphere are subjected to an anodising treatment then fi nished with a powder-coating treatment. The product is equipped with an IP 66 valve through which air is released in the event of overpressure. The valve contains a water-repellent membrane that fi lters incoming air from humidity (when the product turns off), so as to protect all the internal components (LEDs, driver, etc.). The LEDs are installed on a die-cast mould comprising 22 collimation points that allow for pointing the LEDs. Each of the 22 supports can house 1 or 2 LEDs, therefore the product comes in either the 22 or 44-LED version. The LEDs are arranged around the fi xture's external perimeter so as to use up the entire available surface and reduce the temperature on the LEDs to a minimum. The diffuser screen consists of a 3 mm thick PMMA structure that can withstand Class IK08 mechanical shocks.
Stilis small LED
the rangeStilis small LED
Stilis small: bike/pedestrian path light
Stilis large: street light
318
The various types of pole and wall mounting systems guarantee maximum application fl exibility.
The types of mounting systems
types of mounting systemsStilis LED
319
the coloursStilis LED
white (code 11)
light grey (code 68)
Cor-Ten (code 79)
dark grey or anthracite (code 86)
320
The importance of correct illumination.Stilis LED
Nobody would ever illuminate a museum with high-pressure sodium lamps
321
The importance of correct illumination.Stilis LED
Nobody would ever illuminate a museum with high-pressure sodium lamps
322
High-pressure sodium lamp: CRI 25
Stilis LED
Our historical town centres are open-air museums: they deserve high-quality lighting, with high-quality LEDs.
323
Stilis LED
Stilis LED: CRI 82
Our historical town centres are open-air museums: they deserve high-quality lighting, with high-quality LEDs.
11 68 79 86
130W
LED
85W
LED
41W
LED
IP66 0.08 m²
Ø 5
0017
5
573
325
technical sheets: street light 500Stilis LED
Description No. of LEDs LED power W [kg] Code Technical drawing [mm]
Stilis 500street light
36 41 W 11.0 79920.____
72 85 W 11.0 79921.____
108 130 W 11.0 79922.____
add the finish colour to the code and the suffix CW (5,000K), NW (4,000K) or WW (3,400K) to select the colour temperature (e.g.: 79920.11NW)
Description Code
touch-screen palmtop computer equipped with software for customising settings
76497.00
Optional accessories
See also Poles section pag. 456
11 68 79 86
54W
LED
27W
LED
11 68 79 86
IP66 0.04 m²
Ø 3
4011
5
403
326
technical sheets: sidewalk 340Stilis LED
Description No. of LEDs LED power W [kg] Code Technical drawing [mm]
Stilis 340sidewalk
22 27 W 8.00 79928.____
44 54 W 8.00 79929.____
add the finish colour to the code and the suffix CW (5,000K), NW (4,000K) or WW (3,400K) to select the colour temperature (e.g.: 79928.11NW)
Description Code
touch-screen palmtop computer equipped with software for customising settings
76497.00
Optional accessories
See also Poles section pag. 456
175
115
332
296
Ø 6
0Ø
60
762
601
139
139
Ø 5
00
Ø 3
40
Ø 3
40
Ø 60
Ø 60
509
347
Ø 5
00
175
168
148
325
Ø 60
Ø 60
870
715
360
360
60
60
68 79 86
327
Stilis LEDtechnical sheets: street light 500
Mounting element size [mm] Code Pole head
Ø 60 75260.__
Ø 60 75300.__
Mounting element size [mm] Code Arm 360
Ø 60 75263.__
Ø 90 75292.__
Ø 102 75297.__
Ø 60 75301.__
Ø 90 75302.__
Ø 102 75303.__
Stilis 500
Stilis 500
Stilis 340
Stilis 340
See also Poles section pag. 456
Ø 60
Ø 102
175
168
1200
155
370
175
785
Ø 5
00
Ø 60 1295
Ø 5
00
Ø 3
40
740
590
Ø 500
68 79 8668 79 86
11 68 79 8611 68 79 86
328
technical sheets: street light 500Stilis LED
Mounting element size [mm] Code Arm 785
Ø 60 75264.__
Ø 90 75293.__
Ø 102 75298.__
Mounting element size [mm] Code Vertical arm
Ø 102 75307.__
Stilis 500
Stilis 500
Code Wall mounting element
75309.__
75308.__
Stilis 500
Stilis 340
See also Poles section pag. 456
175
168
396
564
370
1520
Ø 5
00
Ø 60 2030
325
870
360
175
Ø 5
00
Ø 60
325
1295
785
Ø 5
00
Ø 60
175
60
68 79 86
329
Stilis LEDtechnical sheets: street light 500
Mounting element size [mm] Code Arm 1520
Ø 60 75265.__
Ø 90 75294.__
Ø 102 75299.__
Stilis 500
Mounting element size [mm] Code 360 dual arm
Ø 60 75267.__
Mounting element size [mm] Code 785 dual arm
Ø 60 75268.__
Stilis 500
Stilis 500
See also Poles section pag. 456
335
the products
New products for satisfying a highly desirable design need: that of emotional outdoor lighting solutions. A product displaying rigorous design combined with strong personality.Cylinder-shaped aluminium fi xture with 220 mm diameter and 1,800 mm height for the fl oor lamp version, and 600 mm for the bollard, pendant and ceiling-mounted versions.The laser cutting process effected with a computer-controlled machine allows for obtaining extremely varied geometric fi gures, starting from a simple circle. The lower section comprises an EYE LED module with 15 LEDs powered at 350mA, with an 8° light beam. IP65 protection rating, including the electronic ballast housed in a sealed casing. A round closing element In the upper section allows for refl ecting the light downwards.
General features and technical details
Ego LED
IP65
IP65
83
Ø 220
Ø 175
1800
600
337
technical sheets: floor lamp and bollardEgo LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Ego EYE 111floor-standing
20 W 8° 11.0 78686.83__
Description LED power Beam W [kg] Code Technical drawing [mm]
Ego EYE 111bollard
20 W 8° 4.50 78685.83__
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78686.83NW)
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78685.83NW)
IP65
IP65
83
Ø 175
Ø 175
600
max
. 150
060
0
339
technical sheets: pendant and ceiling-mounted fixtureEgo LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Ego EYE 111pendant
20 W 8° 4.50 78687.83__
Description LED power Beam W [kg] Code Technical drawing [mm]
Ego EYE 111ceiling-mounted
20 W 8° 4.50 78688.83__
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78687.83NW)
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78688.83NW)
341
An IP65 fixture with extruded aluminium base: attached to the latter are two harmonic steel bars that enclose the wiring for the safety extra-low voltage powering of the LEDs.The harmonic steel bars swing and return to their original position.A high-power LED with various colours is positioned on the end of the harmonic steel bars.
General features and technical details
marker lightLucylle LED
2838
.5
10
118
112
85
Ø 79
301.5Ø 80
6810
6×10
6
1450
1037
Ø 40
5075
215
250
343
technical sheetsLucylle LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
LucylleCool White LED
12 V 1 W 2.00 76930.00
LucylleBlue LED
12 V 1 W 2.00 76931.00
LucylleAmber LED
12 V 1 W 2.00 76932.00
LucylleGreen LED
12 V 1 W 2.00 76934.00
LucylleRed LED
12 V 1 W 2.00 76935.00
Optional accessories
IP65 system power output 1 W
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling 13 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling 65 fi xtures
38920.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling 45 fi xtures
38933.00
mounting base Ø 80 for fi xing with anchor bolts 76936.00
spike H 300 for ground installation 76937.00
electronic ballast available as accessory
345
An innovative fi xture that implements a series of 48 multi-chip LEDs alongside a white LED with Natural (4,000°K) or WW (3,000 °K) colour temperature. Maximum 240 W luminous power for a useful luminous fl ux of around maximum 13,240 lm. The structure comprises a die-cast aluminium base which houses the fi xture's power and control components.
General features and technical details
spotlightSelva white Eye LED
346
In addition, the base houses the Display (front side), which can be used for setting all the fi xture's operating parameters. The Display can also be used for programming lighting scenes so as to implement the fi xture's STAND ALONE mode without the aid of an external DMX controller. The head housing the LED matrix is made of die-cast aluminium and is fi nned on the rear side for optimal heat dispersal. It is subjected to an anodising treatment and powder-coating. The optical assembly comprises a secondary TIR system that can be easily replaced for varying the relative optical beam.Extra-clear glass protective screen with 4 mm thickness. The glass is secured to the die-cast head structure by means of a die-cast aluminium bezel.A sealing gasket with IP65 protection rating is placed between the glass and bezel.The fi xture's head can be rotated by +/- 45° around the base, and inclined by -75° / + 15° with respect to its axis. All the fi xture's fi xing screws are made of stainless steel. The fi xture is equipped with a wireless DMX connection system (standard feature). This ensures greater practicality and functionality for installations where many electrical wires cannot be laid. The Wireless DMX system must be fl anked by a compatible transmitter (to be purchased separately).An internal clock allows for setting the time of the lighting scenes. The fi xture is designed to ensure effi cient operation in ambient temperatures ranging from -20°C to +35°C. In addition, it contains all the necessary internal thermal protection systems.
General features and technical details
spotlightSelva white Eye LED
347
Selva RGB Eye LED
An innovative fi xture that implements a series of 48 multi-chip LEDs enclosing the 3 primary colours (Red, Green, Blue), in addition to a white LED with Natural (4,000°K) colour temperature.The combination of primary colours and the white LED guarantees extremely pure pastel colours and allows for selecting high-quality colour temperatures that cannot be achieved with RGB LEDs alone. Maximum 240 W luminous power for a useful luminous fl ux of around maximum 7,000 lm. The entire fi xture is controlled through a DMX512A system.
RGB LEDSelva RGB Eye LED
348
The following colours are available:grey 68 (light)grey 86 (dark)
Available colours
the coloursSelva Eye LED
68 86
370
370
230
230
400
400
IP65
IP65
48LEDRGBW
Full Colour
240W
MEDIUM
48LEDNW
240W
MEDIUM
48LEDRGBW
Full Colour
240W
SPOT
48LEDNW
240W
SPOT
48LEDRGBW
Full Colour
240W
FLOOD
48LEDNW
240W
FLOOD
349
technical sheetsSelva Eye LED
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78620.86NW)
integrated electronic control gear
integrated electronic control gearcolour controller DMX512see page 496 and subsequent
Description LED power Beam W [kg] Code Technical drawing [mm]
Selva48 RGBW LEDsFull Colour
max. 240 W spot 15.0 78625.__
max. 240 W medium 15.0 78626.__
max. 240 W flood 15.0 78627.__
Selva48 RGBW LEDsFull Colourwith wireless board
max. 240 W spot 15.0 78635.__
max. 240 W medium 15.0 78636.__
max. 240 W flood 15.0 78637.__
Description LED power Beam W [kg] Code Technical drawing [mm]
Selva48 White LEDs
max. 240 W spot 15.0 78620.____
max. 240 W medium 15.0 78621.____
max. 240 W flood 15.0 78622.____
Selva48 White LEDswith wireless board
max. 240 W spot 15.0 78630.____
max. 240 W medium 15.0 78631.____
max. 240 W flood 15.0 78632.____
351
An innovative fi xture that implements a series of 48 multi-chip LEDs alongside a white LED with Natural (4,000°K) or WW (3,000 °K) colour temperature.Maximum 240 W luminous power for a useful luminous fl ux of around maximum 13,240 lm. The structure comprises a die-cast aluminium base which houses the fi xture's power and control components. In addition, the base houses the Display (front side), which can be used for setting all the fi xture's operating parameters. The Display can also be used for programming lighting scenes so as to implement the fi xture's STAND ALONE mode without the aid of an external DMX controller. The head housing the LED matrix is made of die-cast aluminium and is fi nned on the rear side for optimal heat dispersal. It is subjected to an anodising treatment and powder-coating. The optical assembly comprises a secondary TIR system that can be easily replaced for varying the relative optical beam.
General features and technical details
spotlightSelva Linear Eye LED
352
General features and technical details
WHITE versionExtra-clear glass protective screen with 4 mm thickness. The glass is secured to the die-cast head structure by means of a die-cast aluminium bezel.A sealing gasket with IP65 protection rating is placed between the glass and bezel.The fixture's head can be rotated by +/- 45° around the base, and inclined by -75° / + 15° with respect to its axis. All the fixture's fixing screws are made of stainless steel. The fixture may be equipped with a wireless DMX connection system. This ensures greater practicality and functionality for installations where many electrical wires cannot be laid. The Wireless DMX system must be flanked by a compatible transmitter (to be purchased separately). An internal clock allows for setting the time of the lighting scenes. The fixture is designed to ensure efficient operation in ambient temperatures ranging from -25°C to +35°C. In addition, it contains all the necessary internal thermal protection systems.
RGB versionAn innovative fixture that implements a series of 48 multi-chip LEDs enclosing the 3 primary colours (Red, Green, Blue), in addition to a white LED with Natural (4,000°K) colour temperature.The combination of primary colours and the white LED guarantees extremely pure pastel colours and allows for selecting high-quality colour temperatures that cannot be achieved with RGB LEDs alone. Maximum 240 W luminous power for a useful luminous flux of around maximum 7,000 lm. The entire fixture is controlled through a DMX512A system.
White and RGBSelva Linear Eye LED
354
The following colours are available:grey 68 (light)grey 86 (dark)
Available colours
the coloursSelva Linear Eye LED
68 86
IP65
230
960
264
IP65
230
960
264
355
technical sheetsSelva Linear Eye LED
add the fi nish colour to the code and the suffi x NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 78652.86NW)
integrated electronic control gear
Description LED power Beam W [kg] Code Technical drawing [mm]
Selva linear48 White LEDs
max. 240 W spot 18.5 78652.____
max. 240 W medium 18.5 78653.____
max. 240 W fl ood 18.5 78654.____
Selva linear48 White LEDswith wireless board
max. 240 W spot 18.5 78664.____
max. 240 W medium 18.5 78665.____
max. 240 W fl ood 18.5 78666.____
integrated electronic control gearDMX512 colour controller see page 496 and subsequent
Description LED power Beam W [kg] Code Technical drawing [mm]
Selva linear48 RGBW LEDsFull Colour
max. 240 W spot 18.5 78658.__
max. 240 W medium 18.5 78659.__
max. 240 W fl ood 18.5 78660.__
Selva linear48 RGBW LEDsFull Colourwith wireless board
max. 240 W spot 18.5 78670.__
max. 240 W medium 18.5 78671.__
max. 240 W fl ood 18.5 78672.__
356
The power of light enclosed within a compact fixture displaying minimalist design.
design: Martini Staff
Moove Eye LED
68 86
23080
322
36 LEDNeutral
White (NW)
52W
36 LEDNeutral
White (NW)
52W
36 LEDNeutral
White (NW)
52W
IP65
357
Wall-mounted, technical sheetsMoove Eye LED
General features and technical details
High-power spotlight equipped with 36 LEDs powered at 350 mA.Made of die-cast aluminium with separate control gear compartment for optimal heat control.The optical compartment can be inclined by +/- 20°.Available with 20°or 30° beam opening angle and 8°\44° elliptical distribution.
integrated electronic control gear
Description LED power Beam W [kg] Code Technical drawing [mm]
Moove IP6536 White LEDs
52 W spot 6.00 76131.____
52 W medium 6.00 76132.____
52 W elliptical 6.00 76133.____
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 76131.68NW)
358
Wipp: successful design, extreme functionality.
design: Martini Staff
New! Wipp EYE LED
See also indoor section page 154
359
A family of modular fi xtures for wall, fl oor or pendant installation. Equipped with the EYE LED IP65 technology.Supporting structure made of powder-coated anodised aluminium. Optical support consisting of a painted double anodised aluminium ring for gyroscopic adjustment of each single EYE LED module. Stainless steel fi xing elements. Control gear compartment consisting of an IP65 powder-coated extruded anodised aluminium structure. The EYE LED modules are powered at 350 mA.
General features and technical details
2x adjustableWipp EYE LED
360
4x adjustableWipp EYE LED
General features and technical details
The EYE LED module comprises a die-cast aluminium structure with 24 turrets, with X-shaped profi le, for rapid heat extraction and cable gland with outgoing neoprene cable. An electronic plate equipped with 15 high-effi ciency LEDs and lenses for 8°,20° or 30° light distribution is fi xed to the die-cast structure. An extra-clear tempered glass panel is fi xed onto the front part with silicone glue. These features guarantee an IP65 protection rating for the LED module.
11 68 79
IP65
IP65
386
150
355 40
539
150
355 40
363
technical sheetsWipp EYE LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Wipp EYE 111attachment 2
2 x 20 W 8° 3.50 79965.____
2 x 20 W 20° 3.50 79966.____
2 x 20 W 30° 3.50 79967.____
Description LED power Beam W [kg] Code Technical drawing [mm]
Wipp EYE 111attachment 2
4 x 20 W 8° 6.00 79968.____
4 x 20 W 20° 6.00 79969.____
4 x 20 W 30° 6.00 79970.____
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79965.11NW)
integrated electronic control gear
integrated electronic control gear
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79968.11NW)
364364
Lux: the ideal solution to any architectural lighting requirement.
design: Luca Trazzi
Lux Eye LED range
365
The Lux EYE LED range
The Lux EYELED range
New LEDs, both WHITE and RGB FULL COLOUR, controlled by an accurate thermal project that enhances their performance. For peerless quality.
H = 34cm
366
Die-cast aluminium spotlight with truncated cone shape and radial perimeter grooves. Tempered glass screen fi xed to the die-cast aluminium bezel equipped with stainless steel captive screws secured to the outside of the gasket, for a Class IP65 watertight seal. The bezel holding the glass is hinged to the fi xture's body and is equipped with a draining system that facilitates drainage of rainwater from the screen. The optical compartment, which is accessed from the screen on the front side, houses a 6-LED lighting system. The following optic versions are available: 8°, 20°, 30°. Available in the Warm White (3200°K) and Natural White (4300°K) colour temperatures. The fi xture can be adjusted through the fulcrums of the U-shaped steel fi xing bracket equipped with a goniometer (240°); axial rotation (360°) is also possible. The control gear compartment is accessed by removing the cover which contains slits for dispersing heat and a sealing gasket; the latter is placed on the bottom of the body and is secured with stainless steel captive screws. M16x1.5 entry cable gland. The enamelling process on the components subjected to anti-corrosion galvanic coating is performed using polyester paints for outdoors with high-thickness embossed effect for maximum protection against atmospheric agents and high durability.Dimensions 104 x Ø98 mm
General features and technical details
spotlightLux 98 EYE LED
793211
Ø 9
8
104
340
65
Ø 9
8
104
376
250
Ø 65
6 LEDNeutral
White (NW)
9W
6 LEDNeutral
White (NW)
9W
6 LEDNeutral
White (NW)
9W
IP65
IP65
367
Lux 98 EYE LED
for wall installation, see accessories
The fi xture can be installed on the fl oor or wall by removing the spike.
Optional accessories
Description Code Picture
wall installation bracket75772.1175772.6875772.79
Description Code Picture
mounting plate for wall and fl oor installation 75778.__
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 986 White LEDs
9 W spot 4.00 75640.____
9 W medium 4.00 75641.____
9 W fl ood 4.00 75642.____
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 986 White LEDs
9 W spot 5.00 75645.____
9 W medium 5.00 75646.____
9 W fl ood 5.00 75647.____
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 75640.68NW)
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 75645.68NW)
368
Die-cast aluminium spotlight with truncated cone shape and radial perimeter grooves. Tempered glass screen fi xed to the die-cast aluminium bezel equipped with stainless steel captive screws secured to the outside of the gasket, for a Class IP65 watertight seal. The bezel holding the glass is hinged to the fi xture's body and is equipped with a draining system that facilitates drainage of rainwater from the screen. The optical compartment, which is accessed from the screen on the front side, houses a 12-LED lighting system. The following optic versions are available: 10°, 25°, 40°. Available in the Warm White (3200°K) and Natural White (4300°K) colour temperatures. The fi xture can be adjusted through the fulcrums of the U-shaped steel fi xing bracket equipped with a goniometer (240°); axial rotation (360°) is also possible. The control gear compartment is accessed by removing the cover which contains slits for dispersing heat and a sealing gasket; the latter is placed on the bottom of the body and is secured with stainless steel captive screws. M16x1.5 entry cable gland. The enamelling process on the components subjected to anti-corrosion galvanic coating is performed using polyester paints for outdoors with high-thickness embossed effect for maximum protection against atmospheric agents and high durability.Dimensions 172 x Ø180 mm
General features and technical details
spotlightsLux 180 EYE LED WHITE
793211
Ø 9
6
Ø 1
67
175
12 LEDNeutral
White (NW)
18W
12 LEDNeutral
White (NW)
18W
12 LEDNeutral
White (NW)
18W
IP65
integrated electronic control gear
369
technical sheetsLux 180 EYE LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 18012 White LEDs
18 W spot 3.00 78810.____
18 W medium 3.00 78811.____
18 W fl ood 3.00 78812.____
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78810.68NW)
Description Code Picture
mounting base for fl oor installation 75477.__
bracket for wall installation 75472.__
Description Code Picture
spike 75475.00
glare-reducing visor 75476.__
protective grille 75474.00
370
Fixture made up of two elements: the complete body - entirely die-cast - and the die-cast aluminium shaft that houses the electronic components for colour control. The front screen is made of clear tempered glass. The body houses 7 led RGB LEDs equipped with concentrating lenses, while the LEDs are arranged so as to guarantee excellent colour uniformity, even close to the light source. The light projection has a beam opening angle of 25°. The RGB LEDs housed inside include three 1-Watt junctions for each single colour; this system allows for obtaining the perfect colour blend on the lens while the fi xture's luminous area takes on the same colour as the projected light. Inside the fi xture, a special radiator keeps the temperature of the LEDs below the recommended minimum level indicated by the manufacturer, so as to extend the lifecycle of the light source. Total absence of infrared or ultraviolet components. All the LEDs comprising the fi xture are powered by the series-connected PCBA, thus the same current fl ows through them: in this way, the colours emitted by the single LEDs are identical. Confi gured for up to 126 addresses for accent-type control of the fi xtures. Controllable via the DMX Martini control keypad that is compatible with all control systems operating with the DMX512 standard. Around 16 million emitted colour and light fl ow combinations can be achieved. 3 DMX channels.
General features and technical details
Lux 180 EYE LED RGB full colourspotlight
Ø 9
6
Ø 1
67
175
90×90
400
IP65
793211
35W
7 LEDRGB
371
Lux 180 EYE LED RGBtechnical sheets
integrated electronic control gear
DMX512 colour controller see page 496 and subsequent
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 1807 Full Colour LEDs
max. 35 W medium 8.00 75405.__RGB
372
General features and technical details
Die-cast aluminium spotlight with truncated cone shape and radial perimeter grooves. Tempered glass screen fi xed to the die-cast aluminium bezel equipped with stainless steel captive screws secured to the outside of the gasket, for a Class IP65 watertight seal. The bezel holding the glass is hinged to the fi xture's body and is equipped with a draining system that facilitates drainage of rainwater from the screen. The optical compartment, which is accessed from the screen on the front side, houses a 24-LED (16 led RGB) lighting system. The following optic versions are available: 10°, 25°, 40°. Available in the Warm White (3200°K) and Natural White (4300°K) colour temperatures. The fi xture can be adjusted through the fulcrums of the U-shaped steel fi xing bracket equipped with a goniometer (240°); axial rotation (360°) is also possible. The control gear compartment is accessed by removing the cover which contains slits for dispersing heat and a sealing gasket; the latter is placed on the bottom of the body and is secured with stainless steel captive screws. M16x1.5 entry cable gland. The enamelling process on the components subjected to anti-corrosion galvanic coating is performed using polyester paints for outdoors with high-thickness embossed effect for maximum protection against atmospheric agents and high durability.Dimensions 269x280 mm Ø260 mm.
Also available in the RGB full colour version.
spotlightLux 260 EYE LED WHITE and RGB full colour
165
165
269
269
280
280
Ø 1
25Ø
125
Ø 2
60Ø
260
24 LEDNeutral
White (NW)
35W
16 LEDRGB
65W
24 LEDNeutral
White (NW)
35W
24 LEDNeutral
White (NW)
35W
IP65
IP65
793211
373
technical sheetsLux 260 EYE LED
integrated electronic control gear
integrated electronic control gear
Description Code Picture
mounting base for fl oor installation 75484.__
protective grille 75481.00
Description Code Picture
spike 75482.00
glare-reducing visor 75483.__
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 26024 White LEDs
35 W spot 6.00 78820.____
35 W medium 6.00 78821.____
35 W fl ood 6.00 78822.____
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 26016 Full Colour LEDs
max. 65 W medium 6.00 78826.__RGB
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78820.68NW)
DMX512 colour controller see page 496 and subsequent
374
Die-cast aluminium spotlight with truncated cone shape and radial perimeter grooves. Tempered glass screen fi xed to the die-cast aluminium bezel equipped with stainless steel captive screws secured to the outside of the gasket, for a Class IP65 watertight seal. The bezel holding the glass is hinged to the fi xture's body and is equipped with a draining system that facilitates drainage of rainwater from the screen. The optical compartment, which is accessed from the screen on the front side, houses a 36-LED (24 led RGB) lighting system. The following optic versions are available: 10°, 25°, 40°. Available in the Warm White (3200°K) and Natural White (4300°K) colour temperatures. The fi xture can be adjusted through the fulcrums of the U-shaped steel fi xing bracket equipped with a goniometer (240°); axial rotation (360°) is also possible. The control gear compartment is accessed by removing the cover which contains slits for dispersing heat and a sealing gasket; the latter is placed on the bottom of the body and is secured with stainless steel captive screws. M16x1.5 entry cable gland. The enamelling process on the components subjected to anti-corrosion galvanic coating is performed using polyester paints for outdoors with high-thickness embossed effect for maximum protection against atmospheric agents and high durability.Dimensions 357x380 mm Ø350 mm.Also available in the RGB full colour version.
General features and technical details
spotlightLux 350 EYE LED WHITE and RGB full colour
Ø 3
50Ø
350
56
56
357
357
Ø 1
66Ø
166
36 LEDNeutral
White (NW)
52W
36 LEDNeutral
White (NW)
52W
36 LEDNeutral
White (NW)
52W
24 LEDRGB
95W
793211
IP65
IP65
375
technical sheetsLux 350 EYE LED
integrated electronic control gear
integrated electronic control gearDMX512 colour controller see page 496 and subsequent
Optional accessories
Description Code Picture
fi xing bracket for fl oor or wall installation 75489.__
protective grille 75486.00
Description Code Picture
spike 75487.00
glare-reducing visor 75488.__
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 35024 Full Colour LEDs
max. 95 W medium 8.00 78836.__RGB
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 35036 White LEDs
52 W spot 8.00 78830.____
52 W medium 8.00 78831.____
52 W fl ood 8.00 78832.____
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78830.68NW)
376
Die-cast aluminium spotlight with truncated cone shape and radial perimeter grooves. Tempered glass screen fixed to the die-cast aluminium bezel equipped with stainless steel captive screws secured to the outside of the gasket, for a Class IP65 watertight seal. The bezel holding the glass is hinged to the fixture's body and is equipped with a draining system that facilitates drainage of rainwater from the screen. The optical compartment, which is accessed from the screen on the front side, houses a 48-LED lighting system. The following optic versions are available: 10°, 25°, 40°. Available in the Warm White (3200°K) and Natural White (4300°K) colour temperatures. The fixture can be adjusted through the fulcrums of the U-shaped steel fixing bracket equipped with a goniometer (240°); axial rotation (360°) is also possible. The control gear compartment is accessed by removing the cover which contains slits for dispersing heat and a sealing gasket; the latter is placed on the bottom of the body and is secured with stainless steel captive screws. M16x1.5 entry cable gland. The enamelling process on the components subjected to anti-corrosion galvanic coating is performed using polyester paints for outdoors with high-thickness embossed effect for maximum protection against atmospheric agents and high durability.Dimensions 415x440 mm Ø400 mm.
General features and technical details
spotlightLux 400 EYE LED WHITE
Ø 3
87
60
416
Ø 1
88
48 LEDNeutral
White (NW)
70W
48 LEDNeutral
White (NW)
70W
48 LEDNeutral
White (NW)
70W
793211
IP65
377
technical sheetsLux 400 EYE LED
integrated electronic control gear
Optional accessories
Description Code Picture
fi xing bracket for fl oor or wall installation 75489.__
protective grille 75491.00
Description Code Picture
spike 75487.00
glare-reducing visor 75493.__
Description LED power Beam W [kg] Code Technical drawing [mm]
Lux 40048 White LEDs
70 W spot 11.0 78840.____
70 W medium 11.0 78841.____
70 W fl ood 11.0 78842.____
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78840.68NW)
378
Twin support system for installing Lux 350 and Lux 400 spotlights, consisting of die-cast aluminium fi xing brackets, steel arm and tie rod; confi gured for use with the most common pole diameters.
General features and technical details
Twinsupport system
1150
650
1280
860
2300
860
1145
1300
1280
1145
Ø
H
Ø
H
+ + +
7932
380
technical sheetsTwin
Twin 1 double arm code 78045.__
Twin 1 single armcode 78042.__
double mounting element
Ø 60 H = 155 78001.__Ø 89 H = 155 78005.__Ø 102 H = 155 78009.__Ø 120 H = 155 78013.__Ø 142 H = 180 78017.__Ø 171 H = 180 78021.__
Ø 60 H = 155 78000.__Ø 89 H = 155 78004.__Ø 102 H = 155 78008.__Ø 120 H = 155 78012.__Ø 142 H = 180 78016.__Ø 171 H = 180 78020.__
single mounting element
guide to ordering
fi xture pole page 492 mounting element (1-piece pack) arm
Ø
H
Ø
H
940
1320
1145
1320
1145
1880
+ + +
7932
381
technical sheetsTwin
Twin 2 double armcode 78044.__
Twin 2 single arm code 78041.__
double mounting element
Ø 60 H = 155 78001.__Ø 89 H = 155 78005.__Ø 102 H = 155 78009.__Ø 120 H = 155 78013.__Ø 142 H = 180 78017.__Ø 171 H = 180 78021.__
Ø 60 H = 155 78000.__Ø 89 H = 155 78004.__Ø 102 H = 155 78008.__Ø 120 H = 155 78012.__Ø 142 H = 180 78016.__Ø 171 H = 180 78020.__
single mounting element
guide to ordering
fi xture pole page 492 armmounting element (1-piece pack)
1150
860
1145
860
1145
2300
Ø
H
Ø
H
+ + +
7932
382
technical sheetsTwin
Twin 3 double arm code 78043.__
Twin 3 single armcode 78040.__
double mounting element
Ø 60 H = 155 78001.__Ø 89 H = 155 78005.__Ø 102 H = 155 78009.__Ø 120 H = 155 78013.__Ø 142 H = 180 78017.__Ø 171 H = 180 78021.__
Ø 60 H = 155 78000.__Ø 89 H = 155 78004.__Ø 102 H = 155 78008.__Ø 120 H = 155 78012.__Ø 142 H = 180 78016.__Ø 171 H = 180 78020.__
single mounting element
guide to ordering
fi xture pole page 492 armmounting element (1-piece pack)
384
Compact and resistant, for effective accent lighting.
design: Martini Staff
Stralis LED spotlight
385
A compact spotlight with an aluminium body and adjustable steel bracket.Anodised and powder-coated structure.Equipped with 1 or 3 W LEDs.Polycarbonate closing screen that guarantees an IP67 protection rating.
General features and technical details
spotlightStralis LED spotlight
68
Ø 3
9
81
79
Ø 3
9
81
79
79
386
technical sheetsStralis LED spotlight
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
White LED * 12 VDC 3 W 10° 0.30 76646.____
Blue LED 12 VDC 3 W 10° 0.30 76647.__
White LED * 12 VDC 1 W 10° 0.30 76640.____
Blue LED 12 VDC 1 W 10° 0.30 76641.__
Amber LED 12 VDC 1 W 10° 0.30 76642.__
Green LED 12 VDC 1 W 10° 0.30 76644.__
Red LED 12 VDC 1 W 10° 0.30 76645.__
IP67 system power 2.5 W
IP67 system power 4.5 W
* add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 76646.68WW)
Light source Voltage Wattage Beam W [kg] Code Technical drawing [mm]
White LED * 12 VDC 3 W 60° 0.30 76636.____
Blue LED 12 VDC 3 W 60° 0.30 76637.__
White LED * 12 VDC 1 W 60° 0.30 76630.____
Blue LED 12 VDC 1 W 60° 0.30 76631.__
Amber LED 12 VDC 1 W 60° 0.30 76632.__
Green LED 12 VDC 1 W 60° 0.30 76634.__
Red LED 12 VDC 1 W 60° 0.30 76635.__
IP67 system power 2.5 W
IP67 system power 4.5 W
* add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 76636.68WW)
electronic ballast available as accessory
electronic ballast available as accessory
2838
.5
118
112
5075
215
250
85
6810
6×10
6
Optional accessories
68
Ø 3
9
81
79
79
387
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 76646.68WW)
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 76636.68WW)
technical sheetsStralis LED spotlight
Light source Wattage Beam W [kg] Code Technical drawing [mm]
Full Colour RGB LED max. 3 W 25° 0.35 76638.__
IP67 system power 3 WDMX512 colour controller see page 496 and subsequent
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling 3 fi xtures mounting 3 W LEDssuitable for controlling 6 fi xtures mounting 1 W LEDs
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling 15 fi xtures mounting 3 W LEDssuitable for controlling 28 fi xtures mounting 1 W LEDs
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling 11 fi xtures mounting 3 W LEDssuitable for controlling 20 fi xtures mounting 1 W LEDs
38920.00
388
Sober design with recessed LED module for excellent visual comfort and IP65 protection rating.
design: Giampiero Peia
New! Perla EYE LED
See also indoor section page 170
389
Aluminium body manufactured by means of a spin-forming and laser-cutting process. The body is subjected to an anodisation process and is then powder-coated. The optical assembly is secured using a PPS support with bayonet mount and fi xed through a stainless steel spring. The EYE LED module comprises a die-cast aluminium structure with 24 turrets, with X-shaped profi le, for rapid heat extraction and cable gland with neoprene outgoing cable. An electronic plate equipped with 15 high-effi ciency LEDs and lenses for 8°,20° or 30° light distribution is fi xed to the die-cast structure. A 3mm thick extra-clear tempered glass panel is secured to the front part with silicone glue. These features guarantee an IP65 protection rating for the LED module. The LEDs are powered at 350 mA while the ballast must be ordered separately.
General features and technical details
recessed fi xturesPerla EYE LED
11 79
IP65
210
Ø 160
Ø 165
103
93.5
216757
,5
30,5
13340
392
technical sheetsPerla EYE LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Perla EYE 111round recessed with bezel
20 W 8° 1.50 79940.____
20 W 20° 1.50 79941.____
20 W 30° 1.50 79942.____
Optional accessories
add the fi nish colour to the code and the suffi x NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79940.11NW)
Required accessories
Description Code Picture
decorative round ring for Perla EYE LED 111(Ø 200)
93440.__
Description Code Picture
decorative square ring for Perla EYE LED 111(205x205 mm)
93441.__
Description Code Picture Technical drawing [mm]
20 W electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
35159.00
IP67 electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
38947.00
add after the colour temperature “B” letter to choose the white interior ring (e.g.: 79940.11NWB)
electronic ballast available as accessory
11 79
IP65
210
165x165
175×175
Plasterboard drilling
103
93.5
216757
.5
30.5
13340
393
technical sheetsPerla EYE LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Perla EYE 111square recessed with bezel
20 W 8° 1.60 79943.____
20 W 20° 1.60 79944.____
20 W 30° 1.60 79945.____
Optional accessories
add the fi nish colour to the code and the suffi x NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79943.11NW)
Description Code Picture Technical drawing [mm]
20 W electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
35159.00
IP67 electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
38947.00
add after the colour temperature “B” letter to choose the white interior ring (e.g.: 79940.11NWB)
electronic ballast available as accessory
394
Ideal for any outdoor application, an extremely reliable recessed fixture.
design: Martini Staff
New! Set Eye LED
See also indoor section page 194
395
Steel ring with stainless steel springs for installation on false ceilings. The fixture is subjected to an anodisation process and is then powder-coated. The EYE LED module comprises a die-cast aluminium structure with 24 turrets, with X-shaped profile, for rapid heat extraction and cable gland with neoprene outgoing cable. An electronic plate equipped with 15 high-efficiency LEDs and lenses for 8°,20° or 30° light distribution is fixed to the die-cast structure. A 3 mm thick extra-clear tempered glass panel is secured to the front part with silicone glue. These features guarantee an IP65 protection rating for the LED module.The LEDs are powered at 350 mA while the ballast must be ordered separately.
General features and technical details
recessed fixturesSet Eye LED
11 68 79
IP65
103
93.5
Ø 140
216757
.5
30.5
13340
399
technical sheetsSet LED
Description LED power Beam W [kg] Code Technical drawing [mm]
Set EYE 111recessed
20 W 8° 1.10 79950.____
20 W 20° 1.10 79951.____
20 W 30° 1.10 79952.____
add the fi nish colour to the code and the suffi x NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79950.11NW)
Optional accessories
Description Code Picture Technical drawing [mm]
20 W electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
35159.00
IP67 electronic ballast 220-240 VAC50-60 Hzsuitable for controlling 1 fi xture
38947.00
electronic ballast available as accessory
401
Extruded aluminium linear fi xture with 49x63 mm cross-sectional dimensions and powder-coated die-cast aluminium end caps. Extra-clear tempered closing glass sealed to the body with silicone sealant. Available with symmetric distribution having 20° and 30° beam angle and 8°\44° elliptical distribution.Inclusive of cable gland and 2-metre long neoprene cable.IP65 protection rating.Power factor corrected incorporated electronic ballast.
General features and technical details
Aveline LED
6363
300 - 600 - 900 - 1200 - 1500
300 - 600 - 900 - 1200 - 1500
49
49
68
68
IP65
IP65
11 68 79
18 LEDNeutral
White (NW)
30W
18 LEDNeutral
White (NW)
30W
30 LEDNeutral
White (NW)
50W
30 LEDNeutral
White (NW)
50W
12 LEDNeutral
White (NW)
20W
12 LEDNeutral
White (NW)
20W
24 LEDNeutral
White (NW)
40W
24 LEDNeutral
White (NW)
40W
6 LEDNeutral
White (NW)
10W
6 LEDNeutral
White (NW)
10W
402
technical sheetsAveline LED
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
6 White LEDs 10 W 300 1.30 78750.____
12 White LEDs 20 W 600 2.35 78725.____
18 White LEDs 30 W 900 3.50 78731.____
24 White LEDs 40 W 1200 4.50 78737.____
30 White LEDs 50 W 1500 5.50 78743.____
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
6 White LEDs 10 W 300 1.30 78751.____
12 White LEDs 20 W 600 2.35 78726.____
18 White LEDs 30 W 900 3.50 78732.____
24 White LEDs 40 W 1200 4.50 78738.____
30 White LEDs 50 W 1500 5.50 78744.____
integrated electronic control gear
integrated electronic control gear
medium-beam symmetrical emission (~ 20°)
wide-beam symmetrical emission (~ 30°)
add the finish colour to the code and the suffix NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78725.68NW)
add the finish colour to the code and the suffix NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78726.68NW)
63
300 - 600 - 900 - 1200 - 1500 49
68
73
86.5
86.5
197
100
50
90
3030
IP65
11 68 79
18 LEDNeutral
White (NW)
30W
30 LEDNeutral
White (NW)
50W
12 LEDNeutral
White (NW)
20W
24 LEDNeutral
White (NW)
40W
6 LEDNeutral
White (NW)
10W
403
technical sheetsAveline LED
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
6 White LEDs 10 W 300 1.30 78752.____
12 White LEDs 20 W 600 2.35 78727.____
18 White LEDs 30 W 900 3.50 78733.____
24 White LEDs 40 W 1200 4.50 78739.____
30 White LEDs 50 W 1500 5.50 78745.____
integrated electronic control gear
elliptical emission (~ 8°/44°)
Optional accessories
Description Code Picture Technical drawing [mm]
fi xed brackets L=50 mm 91161.__
fi xed brackets L=100 mm 91162.__
extendable brackets L=195-295 mm 91160.__
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78727.68NW)
404
Linear system mounting high-power LEDs available with either white or full colour RGB LEDs.
design: Martini Staff
Aton LED
405
General features and technical details
Aton LED white and RGB
Extruded aluminium linear fi xture with 56x75 mm cross-sectional dimensions and powder-coated die-cast aluminium end caps. Extra-clear tempered closing glass sealed to the body with silicone sealant. Available with symmetrical distribution with 20° and 30° beam opening angles, and 8°\44° elliptical distribution; inclusive of cable gland and 2 metre-long neoprene cable. IP65 protection rating. Power factor corrected incorporated electronic ballast.RGB versionAll the LEDs comprising the fi xture are powered by the series-wired PCBA that guarantees identical colour emission from the single LEDs. 64 addresses for accent-type fi xture control. Controllable via dip-switch for re-programmed lighting scenes and DMX 76493.00 control system, compatible with all control systems based on the DMX512 standard. Three DMX channels. Around 16 million emitted colour and light fl ow combinations can be achieved.
11 68 79
7575
600 - 900 - 1200 - 1500
600 - 900 - 1200 - 1500
56
56
75
75
IP65
IP65
18 LEDNeutral
White (NW)
30W
18 LEDNeutral
White (NW)
30W
30 LEDNeutral
White (NW)
50W
30 LEDNeutral
White (NW)
50W
12 LEDNeutral
White (NW)
20W
12 LEDNeutral
White (NW)
20W
24 LEDNeutral
White (NW)
40W
24 LEDNeutral
White (NW)
40W
407
technical sheetsAton LED
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
12 White LEDs 20 W 600 2.60 78771.____
18 White LEDs 30 W 900 3.85 78776.____
24 White LEDs 40 W 1200 5.00 78781.____
30 White LEDs 50 W 1500 6.00 78786.____
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
12 White LEDs 20 W 600 2.60 78772.____
18 White LEDs 30 W 900 3.85 78777.____
24 White LEDs 40 W 1200 5.00 78782.____
30 White LEDs 50 W 1500 6.00 78787.____
integrated electronic control gear
integrated electronic control gear
medium-beam symmetrical emission (~ 20°)
wide-beam symmetrical emission (~ 30°)
add the finish colour to the code and the suffix NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78771.68NW)
add the finish colour to the code and the suffix NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78772.68NW)
11 68 79
75
600 - 900 - 1200 - 1500 56
75
73
86.5
86.5
197
100
50
90
3030
IP65
18 LEDNeutral
White (NW)
30W
30 LEDNeutral
White (NW)
50W
12 LEDNeutral
White (NW)
20W
24 LEDNeutral
White (NW)
40W
408
technical sheetsAton LED
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
12 White LEDs 20 W 600 2.60 78773.____
18 White LEDs 30 W 900 3.85 78778.____
24 White LEDs 40 W 1200 5.00 78783.____
30 White LEDs 50 W 1500 6.00 78788.____
integrated electronic control gear
elliptical emission (~ 8°/44°)
Optional accessories
Description Code Picture Technical drawing [mm]
fi xed brackets L=50 mm 91161.__
fi xed brackets L=100 mm 91162.__
extendable brackets L=195-295 mm 91160.__
add the fi nish colour to the code and the suffi x NW (4,300K) or WW (3,200K) to select the colour temperature (e.g.: 78773.68NW)
11 68 79
75
570 - 850 - 1130 - 1410 56
74.2
73
86.5
86.5
197
100
50
90
3030
IP65
12 LEDRGB
Full Colour
60W
20 LEDRGB
Full Colour
100W
8 LEDRGB
Full Colour
40W
16 LEDRGB
Full Colour
80W
409
technical sheetsAton LED
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
8 RGB LEDs Full Colour
40 W 570 2.60 78790.__RGB
12 RGB LEDs Full Colour
60 W 850 3.85 78792.__RGB
16 RGB LEDs Full Colour
80 W 1130 5.00 78794.__RGB
20 RGB LEDs Full Colour
100 W 1410 6.00 78796.__RGB
integrated electronic control gear
beam symmetrical emission (~ 25°)DMX512 colour controller see page 496 and subsequent
Optional accessories
Description Code Picture Technical drawing [mm]
fi xed brackets L=50 mm 91161.__
fi xed brackets L=100 mm 91162.__
extendable brackets L=195-295 mm 91160.__
410
Rigorous style enclosing all the power of the new high-power LED.
design: Pier Filippo Ferrari
Giulius LED
11 68 79
195
120
103
LEDNeutral
White (NW)
9W
IP65
411
General features and technical details
Wall-mounted fixture consisting of a U-shaped anodised powder-coated and extruded aluminium structure; it houses a 2 mm thick parallelepiped-shaped tempered glass panel that protects a high-power LED. Dual emission light distribution.IP65 protection rating.
Wall-mounted, technical sheetsGiulius LED
Light source LED power W [kg] Code Technical drawing [mm]
White LED 9 W 1.70 76344.____
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 76344.68NW)
90°
70°
50°
413
Wall-mounted fixture consisting of a powder-coated extruded anodised aluminium structure. Powder-coated die-cast anodised aluminium end caps. Single and dual emission light distribution with tempered closing glass or convex and moulded lens.The high-power LEDs housed inside the fixture can be positioned on a metal support that helps to disperse heat and position the LEDs at three different focal lengths from the lens, so as to obtain different grazing light beam opening angles. IP65 protection rating. Incorporated ballast.
General features and technical details
wall-mounted fixtureEdo LED
11 68 79
IP65
IP65
184
169
120
184
169
120
414
technical sheets: one lightEdo LED
Description LED power W [kg] Code Technical drawing [mm]
Edi 1 glass 9 W 2.80 79960.____
Description LED power W [kg] Code Technical drawing [mm]
Edo 1 lens 9 W 2.80 79961.____
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79960.11NW)
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79961.11NW)
IP65
IP65
184
169
120
184
169
120
415
Edo LEDtechnical sheets: two lights
Description LED power W [kg] Code Technical drawing [mm]
Edo 2 glass panels + lens 2 x 9 W 2.80 79962.____
Description LED power W [kg] Code Technical drawing [mm]
Edo 2 lenses + lens 2 x 9 W 2.80 79963.____
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79962.11NW)
add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 79963.11NW)
416
Compact dimensions coupled with an elegant design for effective signalling applications.
design: Martini Staff
Drop LED
417
Extruded aluminium single and dual emission fi xture with die-cast powder-coated and anodised aluminium end cap. Tempered glass inserted in the end cap frame; tightening the stainless steel screws allows for obtaining an IP65 protection rating as the end cap closes against a gasket.
General features and technical details
wall-mounted fi xturesDrop LED
11 68 79
75
7570
75
7514
028
38.5
118
112
5075
215
250
85
6810
6×10
6
IP65
IP65
LEDCool
White (CW)
4,5W
LEDCool
White (CW)
9W
419
technical sheetsDrop LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED* 12 VDC 2 × 3 W 1.25 76651.____
Blue LED 12 VDC 2 × 3 W 1.25 76653.__
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED* 12 VDC 3 W 0.75 76650.____
Blue LED 12 VDC 3 W 0.75 76652.__
system power 4.5 W*add the fi nish colour to the code and the suffi x CW (Cool White) or WW (Warm White) to select the colour temperature (e.g.: 76650.11CW)
system power 9 W*add the fi nish colour to the code and the suffi x CW (Cool White) or WW (Warm White) to select the colour temperature (e.g.: 76651.11CW)
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsingle emission: suitable for controlling up to 3 fi xturesdual emission: suitable for controlling up to 1 fi xture
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsingle emission: suitable for controlling up to 15 fi xturesdual emission: suitable for controlling up to 7 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsingle emission: suitable for controlling up to 11 fi xturesdual emission: suitable for controlling up to 5 fi xtures
38920.00
421
Aluminium plate with 87 mm diameter, with anti-rust and powder coating treatment, to be fixed to the wall or ceiling with stainless steel screws. Central satin-finish methacrylate diffuser that houses high-power LEDs in several optional colours. Without recess box.
General features and technical details
signalling lightFix LED
68 86
25
Ø 8
7
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP65 LEDCool
White (CW)
3,6W
423
technical sheetsFix LED
Optional accessories
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.17 76480.__
Blue LED 12 VDC 1 W 0.17 76481.__
Amber LED 12 VDC 1 W 0.17 76482.__
Green LED 12 VDC 1 W 0.17 76484.__
Red LED 12 VDC 1 W 0.17 76485.__
system power 3.6 W
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 4 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 19 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 14 fi xtures
38920.00
electronic ballast available as accessory
424
A product for architecture, mingled with the architecture.
design: Ettore Fantasia
Grisi LED wall-mounted
425
the 4-light and 2-light fixtureGrisi LED wall-mounted
General features and technical details
Fixture for wall or ceiling installation withIP65 protection rating.Wall-fixing support made of sheet steel. Aluminium and polycarbonate optical structure housing high-power LEDs. Thermoplastic cover for a 2-beam or 4-beam light emission, with easy click-fit installation thanks to the use of 4 permanent magnets. A stainless steel grub screw mounted on the side allows for locking the cover.External ballast.
120
120
32
120
120
35
2240
118
112
LEDCool
White (CW)
3W
LEDCool
White (CW)
3W
11 68
428
technical sheetsGrisi LED wall-mounted
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 3 W 0.60 78380.__W
Amber LED 3 W 0.60 78380.__A
Blue LED 3 W 0.60 78380.__B
Green LED 3 W 0.60 78380.__G
Red LED 3 W 0.60 78380.__R
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 3 W 0.60 78390.__W
Amber LED 3 W 0.60 78390.__A
Blue LED 3 W 0.60 78390.__B
Green LED 3 W 0.60 78390.__G
Red LED 3 W 0.60 78390.__R
IP65 constant current power supply at 700mA
IP65 constant current power supply at 700mA
Description Code Picture Technical drawing [mm]
IP40 230-240V/700mA DC ballastsuitable for powering up to:5 Grisi 120 fi xtures2 Grisi 200 fi xtures - 2 beams1 Grisi 200 fi xtures - 4 beams
35189.00
electronic ballast available as accessory
electronic ballast available as accessory
11 68
2240
118
112
200
200
50
200
200
50
LEDRGB
2x3W
LEDRGB
4x3W
LEDCool
White (CW)
2x3W
LEDCool
White (CW)
4x3W
IP65
IP65
429
technical sheetsGrisi LED wall-mounted
Description Code Picture Technical drawing [mm]
IP40 230-240V/700mA DC ballastsuitable for powering up to:5 Grisi 120 fi xtures2 Grisi 200 fi xtures - 2 beams1 Grisi 200 fi xtures - 4 beams
35189.00
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 2 × 3 W 1.40 78410.__W
Amber LED 2 × 3 W 1.40 78410.__A
Blue LED 2 × 3 W 1.40 78410.__B
Green LED 2 × 3 W 1.40 78410.__G
Red LED 2 × 3 W 1.40 78410.__R
RGB LED 2 × 3 W 1.40 78410.__RGB
Description LED power W [kg] Code Technical drawing [mm]
Cool White LED 4 × 3 W 1.40 78420.__W
Amber LED 4 × 3 W 1.40 78420.__A
Blue LED 4 × 3 W 1.40 78420.__B
Green LED 4 × 3 W 1.40 78420.__G
Red LED 4 × 3 W 1.40 78420.__R
RGB LED 4 × 3 W 1.40 78420.__RGB
IP65 constant current power supply at 700 mA
IP65 constant current power supply at 700 mA
DMX512 colour controller see page 496 and subsequent
DMX512 colour controller see page 496 and subsequent
430430
Highly compact recessed fixture for path marking that mounts high-efficiency LEDs.
design: Martini Staff
Roof LED
See also indoor section page 280
431
Recessed fixture made of powder-coated die-cast aluminium subjected to anti-rust treatment.Inclusive of stainless steel springs for installation on plasterboard walls. Recess box for installation on solid walls supplied separately.Available in grey.
General features and technical details
recessed fixturesRoof LED
78×78 204×188×70
68
IP65
LEDCool
White (CW)
1W
78×78 204×188×70
Plasterboard drilling Solid wall drilling
IP65
LEDNeutral
White (NW)
4W
110
45
52
90
90
115
45
52
90
90
433
technical sheetsRoof LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.20 38900.68
Blue LED 12 VDC 1 W 0.20 38901.68
Amber LED 12 VDC 1 W 0.20 38902.68
Green LED 12 VDC 1 W 0.20 38904.68
Red LED 12 VDC 1 W 0.20 38905.68
Plasterboard drilling Solid wall drilling
Description Voltage LED power W [kg] Code Technical drawing [mm]
White LED 24 VDC 4 W 0.20 78870.68__
add the suffix NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 78870.68NW)
electronic ballast available as accessory
electronic ballast available as accessory
2838
.5
118
112
5075
215
250
85
6810
6×10
6
1949
6017
8
434
technical sheetsRoof LED
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling 12 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling 50 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling 35 fi xtures
38920.00
recess box for solid walls 38908.00
recess box for concrete 38909.00
5055
7580
215
235
250
270
1949
6017
838
27
112
435
technical sheetsRoof LED
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 4 fi xtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 16 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 30 fi xtures
38935.00
recess box for solid walls 38908.00
recess box for concrete 38909.00
437
the productsOsio Pil LED
General features and technical details
Double-insulated linear system with high-power LEDs enclosed within a powder-coated extruded anodised aluminium structure. Floor installation by means of a recess box; installable in continuous rows without interruptions in the tempered, walk-over glass screen that can withstand static loads of 200 kg and Class IK07 impacts, and has an IP67 protection rating. Die-cast aluminium end caps.Power factor corrected electronic control gear.
68 79
122
110 704 - 1004
82
122
110 704 - 1004
82
IP67
IP67
IK07
IK07
24 LEDNeutral
White (NW)
41W
50W
12 LEDRGB
16 LEDNeutral
White (NW)
27W
35W
8 LEDRGB
440
technical sheets: walkable single moduleOsio Pil LED
Optional accessories
Description Code Picture
IP67 cable gland for pass-through wiring connections 91058.00
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
16 White LEDs 27 W 704 5.00 78210.____
Recess box 682×153×175 91060.00
24 White LEDs 41 W 1004 7.50 78211.____
Recess box 982×153×175 91061.00
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
8 Full Colour RGB LEDs
max. 35 W 704 5.50 78230.__
Recess box 682×153×175 91060.00
12 Full Colour RGB LEDs max. 50 W 1004 7.50 78231.__
Recess box 982×153×175 91061.00
symmetric optic
symmetric optic
add the fi nish colour to the code and the suffi x CW (Cool White) or WW (Warm White) to select the colour temperature (e.g.: 78210.68CW)
DMX512 colour controller see page 496 and subsequent
68 79
122
122
110
110
604 - 904
604 - 904
82
82
IP67
IP67
IK07
IK07
24 LEDNeutral
White (NW)
41W
50W
12 LEDRGB
16 LEDNeutral
White (NW)
27W
35W
8 LEDRGB
441
technical sheets: continous series walkable moduleOsio Pil LED
Optional accessories
Description Code Picture
IP67 cable gland for pass-through wiring connections
91058.00
end cap with bezel and sealing gasket(2-piece pack)
91096.__
Description Code Picture
recess box end caps kit (2-piece pack) 91065.00
recess box end cap for installation with accessory 91096.__(2-piece pack)
91097.00
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
16 White LEDs 27 W 604 5.30 78212.____
Recess box 655×153×175 91066.00
24 White LEDs 41 W 904 7.70 78213.____
Recess box 955×153×175 91067.00
Description LED power Length [mm] W [kg] Code Technical drawing [mm]
8 Full Colour RGB LEDs
max. 35 W 604 5.30 78235.__
Recess box 655×153×175 91066.00
12 Full Colour RGB LEDs max. 50 W 904 7.70 78236.__
Recess box 955×153×175 91067.00
symmetric optic
symmetric optic
add the fi nish colour to the code and the suffi x CW (Cool White) or WW (Warm White) to select the colour temperature (e.g.: 78212.68CW)
DMX512 colour controller see page 496 and subsequent
442
High-power recessed drive-over fi xture for illuminating broad surfaces with few lights.
design: Martini Staff
Piana Eye LED
443
Recessed IP67 fl oor-mounted fi xture with die-cast aluminium body and stainless steel bezel; the tempered glass is able to withstand static loads of 5,000 kg (at a maximum transit speed of 50 km/h) and Class IK10 mechanical shocks, while the contact temperature is below 55°C. The 56 high-power LEDs develop 85 W and are housed in a swivelling structure with +/-15° inclination. Optics with 10°, 25°and 40° beam angle.Incorporated control gear. Double-insulated fi xture.The 20 FULL COLOUR LEDs generate 85W power. Optic with 25° beam angle.All the LEDs comprising the fi xture are powered by the PCBA wired in series that guarantees identical colour emission. Confi gured for up to 64 addresses for accent-type control of the fi xtures. Controllable via the DMX 76493.00 control keypad that is compatible with all control systems operating with the DMX512 standard. Three DMX channels. Around 16 million emitted colour and light fl ow combinations can be achieved.
General features and technical details
recessed drive-over fi xturesPiana Eye LED
378
378
265
244.
524
4.5
461
461
355
355
461
461
56LEDNeutral
White (NW)
85W
SPOT
20LEDRGB
Full Colour
85W
56LEDNeutral
White (NW)
85W
MEDIUM
56LEDNeutral
White (NW)
85W
FLOOD
IP67 IK10 5,000 kg
IP67 IK10 5,000 kg
444
technical sheetsPiana Eye LED
Optional accessories
Description Code Picture Technical drawing [mm]
recess box 378×378×265 78473.00
Description LED power Beam W [kg] Code Technical drawing [mm]
Piana LED 46056 White LEDs
85 W spot 22.0 78466.00__
85 W medium 22.0 78467.00__
85 W fl ood 22.0 78468.00__
Description LED power Beam W [kg] Code Technical drawing [mm]
Piana LED 46020 RGB LEDs Full Colour
max. 85 W medium 22.0 78469.00RGB
add the suffi x NW (4,300K) or WW (3,200K) to the code to select the colour temperature (e.g.: 78466.00NW)
integrated electronic control gearDMX512 colour controller see page 496 and subsequent
integrated electronic control gear
236
122
122
122
236
131
131
131
131
3LEDCool
White (CW)
6W
1LEDCool
White (CW)
2,5W
IP67 IK10 5,000 kg
IP67 IK10 5,000 kg
445
technical sheetsPiana Eye LED
Optional accessories
Description Code Picture Technical drawing [mm]
recess box 236x236x122 78470.00
Description LED power Beam W [kg] Code Technical drawing [mm]
Piana LED 130 1 Warm White LEDs
2.5 W wide fl ood 1.50 78448.00
Piana LED 130 1 Cool White LEDs
2.5 W wide fl ood 1.50 78453.00
Piana LED 130 1 Blue LEDs
2.5 W wide fl ood 1.50 78454.00
Description LED power Beam W [kg] Code Technical drawing [mm]
Piana LED 130 3 Warm White LEDs
6 W spot 1.50 78449.00
Piana LED 130 3 Cool White LEDs
6 W spot 1.50 78455.00
Piana LED 130 3 Blue LEDs
6 W spot 1.50 78456.00
integrated electronic control gear
integrated electronic control gear
446
High luminosity coupled with excellent reliability make WALKIE CAR a landmark of architectural lighting.
design: Martini Staff
Walkie Car 230-300 LED
447
the recessed fi xtures: white and RGBWalkie Car 230-300 LED
General features and technical details
An IP67 fl oor-mounted recessed fi xture with die-cast aluminium body and stainless steel bezel mounting a tempered glass: the latter is capable of withstanding static loads of 5,000 kg at a transit speed of 30 km\hour and Class IK10 mechanical shocks, and has a contact temperature below 55 °C. The 12\24 LEDs generate 18\35 W power and are inserted in a swivelling structure with +\-15° inclination. Optics with 25°, 40° beam angle and 8°x44° blade of light. Incorporated control gear. Double-insulated fi xture with 1-metre long outgoing neoprene cable with cable gland, housed in a resin-coated compartment that prevents penetration of water and humidity.
RGB versionThe 7\16 FULL COLOUR LEDs generate 35\65 W power and are inserted in a swivelling structure with +\-15° inclination.Optics with 25° and 40° beam angle.All the LEDs comprising the fi xture are powered by the series-connected PCBA, thus the same current fl ows through them: in this way, the colours emitted by the single LEDs are identical.64 addresses for accent-type fi xture control. Controllable via the DMX 76493.00 control keypad that is compatible with all control systems operating with the DMX512 standard.Three DMX channels.Around 16 million emitted colour and light fl ow combinations can be achieved.
Ø 200
Ø 200
Ø 232
Ø 232
Ø 234
Ø 234
350
350
12 LEDNeutral
White (NW)
18W
7 LEDRGB
35W
12 LEDNeutral
White (NW)
18W
12 LEDNeutral
White (NW)
18W
448
technical sheets: white and RGBWalkie Car 230 LED
IP67 IK10 5,000 kg
IP67 IK10 5,000 kg
Description LED power Beam W [kg] Code Technical drawing [mm]
Walkie Car 23012 White LEDs
18 W medium 7.20 78851.00__
18 W flood 7.20 78852.00__
18 W elliptical 7.20 78853.00__
Description LED power Beam W [kg] Code Technical drawing [mm]
Walkie Car 2307 RGB LEDsFull Colour
max. 35 W medium 7.20 78856.00RGB
add the suffix NW (4,200K) or WW (3,200K) to the code to select the colour temperature (e.g.: 78851.00NW)
possibility of adjusting the LED unit by ±15°, thanks to a swivelling systemintegrated electronic control gear
possibility of adjusting the LED unit by ±15°, thanks to a swivelling systemintegrated electronic control gearDMX512 colour controller see page 496 and subsequent
Ø 250
Ø 250
Ø 300
Ø 300
Ø 284
Ø 284
380
380
24 LEDNeutral
White (NW)
35W
16 LEDRGB
65W
24 LEDNeutral
White (NW)
35W
24 LEDNeutral
White (NW)
35W
449
technical sheets: white and RGBWalkie Car 300 LED
IP67 IK10 5,000 kg
IP67 IK10 5,000 kg
Description LED power Beam W [kg] Code Technical drawing [mm]
Walkie Car 30024 White LEDs
35 W medium 10.2 78861.00__
35 W flood 10.2 78862.00__
35 W elliptical 10.2 78863.00__
Description LED power Beam W [kg] Code Technical drawing [mm]
Walkie Car 30016 RGB LEDs Full Colour
max. 65 W medium 10.2 78866.00RGB
possibility of adjusting the two LED units separately by ±15°, thanks to a swivelling systemintegrated electronic control gear
possibility of adjusting the two LED units separately by ±15°, thanks to a swivelling systemintegrated electronic control gear
add the suffix NW (4,200K) or WW (3,200K) to the code to select the colour temperature (e.g.: 78861.00NW)
DMX512 colour controller see page 496 and subsequent
451
recessed fi xturesWalkie Car 160 LED
General features and technical details
Die-cast aluminium fi xture with maximum 172 mm total diameter that protrudes 26 mm from the installation surface and has an overall internal size of 56 mm.Available with 1, 2 or 4 light beams.Capable of withstanding a static load of 500 kg at a speed of 10 km/h and Class IK10 mechanical shocks.IP67 protection rating, brand F.Includes recess box, equipped with two cable entry slots.
68
Ø 162
Ø 172
2656
80
Ø 162
Ø 172
2656
80
79
LEDCool
White (CW)
2,5W
LEDCool
White (CW)
2,5W
452
technical sheetsWalkie Car 160 LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 1.50 76450.__
Blue LED 12 VDC 1 W 1.50 76451.__
Amber LED 12 VDC 1 W 1.50 76452.__
Green LED 12 VDC 1 W 1.50 76454.__
Red LED 12 VDC 1 W 1.50 76455.__
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 1.50 76460.__
Blue LED 12 VDC 1 W 1.50 76461.__
Amber LED 12 VDC 1 W 1.50 76462.__
Green LED 12 VDC 1 W 1.50 76464.__
Red LED 12 VDC 1 W 1.50 76465.__
IP67 IK10 500 kg 2.5 W system power
IP67 IK10 500 kg 2.5 W system power
fixture with 1 beam
fixture with 2 beams
electronic ballast available as accessory
electronic ballast available as accessory
68
2838
.5118
112
5075
215
250
85
6810
6×10
6
Ø 162
Ø 172
2656
80
79
LEDCool
White (CW)
2,5W
453
technical sheetsWalkie Car 160 LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 1.50 76470.__
Blue LED 12 VDC 1 W 1.50 76471.__
Amber LED 12 VDC 1 W 1.50 76472.__
Green LED 12 VDC 1 W 1.50 76474.__
Red LED 12 VDC 1 W 1.50 76475.__
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 6 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 28 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 20 fi xtures
38920.00
IP67 IK10 500 kg 2.5 W system power
fi xture with 4 beams
electronic ballast available as accessory
68 86
Ø 128
Ø 83
105
LEDRGB
3W
455
recessed, technical sheets
Recessed fixture with a total diameter of 87 mm and IP67 protection rating, manufactured with a die-cast aluminium body; the bezel is made of powder-coated anodised aluminium and mounts a tempered satin glass capable of withstanding static loads of 200 kg and Class IK07 mechanical shocks.Equipped with 1 FULL COLOUR LED.Available in dark and light grey.
General features and technical details
Walkie Eco RGB LED
Description LED power W [kg] Code Technical drawing [mm]
Walkie EcoFull Colour RGB LED
max. 3 W 0.40 76491.__
IP67 IK07 200 kg
for installation on paving, solid walls or concreteDMX512 colour controller see page 496 and subsequent
456
Elegant design coupled with highly functional LEDs.Fixtures designed for shedding light and attracting praise.
design: Martini Staff
Walkie Talkie 50-90-150 LED
457
Anodised aluminium body and cast aluminium bezel subjected to anti-oxidation treatment. Sand-blasted Pyrex lower sealing glass and 10 mm thick tempered upper glass with contact temperature below 40 °C.Visible bezel made of stainless steel with silicone sealing gasket. IP67 protection rating with outgoing neoprene cable secured with a cable gland, housed in an appropriate resin-coated compartment that prevents penetration of water and humidity. External ballast.
General features and technical details
the recessed fi xturesWalkie Talkie 50-90-150 LED
Ø 6
280
Ø 62
6280
62
LEDWarm
White (WW)
1W
LEDWarm
White (WW)
1W
IP67
IP67
460
technical sheets: 50 recessedWalkie Talkie 50 recessed
square recessed
round recessed
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 50White LED
24 VDC 1 W 0.40 76055.00__
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 50White LED
24 VDC 1 W 0.40 76050.00__
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76055.00NW)
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76050.00NW)
electronic ballast available as accessory
electronic ballast available as accessory
156
132
106
156
132
106
5075
215
250
5580
235
270
3827
112
461
technical sheets: accessoriesWalkie Talkie 50 recessed
Description Code Picture - technical drawing [mm]
housing for concrete - Walkie Talkie 50 square 76058.00
housing for concrete - Walkie Talkie 50 round 76053.00
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 17 fi xtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 60 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 135 fi xtures
38935.00
Ø 1
0490
Ø 104
104
104
90
LEDWarm
White (WW)
4W
LEDWarm
White (WW)
4W
IP67
IP67
462
Walkie Talkie 90 recessedtechnical sheets: 90 recessed
square recessed
round recessed
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 90White LED
24 VDC 4 W 1.00 76080.00__
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 90White LED
24 VDC 4 W 1.00 76085.00__
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76085.00NW)
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76080.00NW)
electronic ballast available as accessory
electronic ballast available as accessory
300
250 12
0
300
250
120
5075
215
250
5580
235
270
3827
112
463
Walkie Talkie 90 recessedtechnical sheets: accessories
Description Code Technical drawing [mm]
housing for concrete - Walkie Talkie 90 square 76088.00
housing for concrete - Walkie Talkie 90 round 76083.00
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 4 fi xtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 15 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 30 fi xtures
38935.00
Ø 1
6480
Ø 164
164
164
80
LEDWarm
White (WW)
8W
LEDWarm
White (WW)
8W
IP67
IP67
464
Walkie Talkie 150 recessedtechnical sheets: 150 recessed
square recessed
round recessed
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 150White LED
24 VDC 8 W 1.80 76145.00__
Description Voltage LED power W [kg] Code Picture Technical drawing [mm]
Walkie Talkie 150White LED
24 VDC 8 W 1.80 76140.00__
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76145.00NW)
add the suffi x NW (4,000K) or WW (3,000K) to the code to select the colour temperature (e.g.: 76140.00NW)
electronic ballast available as accessory
electronic ballast available as accessory
300
260 11
1
300
260
111
5075
215
250
5580
235
270
3827
112
465
Walkie Talkie 150 recessedtechnical sheets
Description Code Technical drawing [mm]
housing for concrete - Walkie Talkie 150 square 76158.00
housing for concrete - Walkie Talkie 150 round 76153.00
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 2 fi xtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 8 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 15 fi xtures
38935.00
467
recessed fi xturesWalkie LED
General features and technical details
Recessed fi xture for grazing light illumination. The aluminium body has a total diameter of 66 mm and protrudes from the installation surface by 10 mm, while its overall internal size measures a mere 10 mm.Capable of withstanding a static load of 100 kg at a speed of 10 km/h and Class IK07 mechanical shocks.IP68 protection rating, brand F.
Ø 65
10
10
48.5
48.5
48.5
Ø 65
10
10
Ø 65
10
40
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
468
technical sheetsWalkie LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76240.00
Blue LED 12 VDC 1 W 0.30 76241.00
Amber LED 12 VDC 1 W 0.30 76242.00
Green LED 12 VDC 1 W 0.30 76244.00
Red LED 12 VDC 1 W 0.30 76245.00
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76250.00
Blue LED 12 VDC 1 W 0.30 76251.00
Amber LED 12 VDC 1 W 0.30 76252.00
Green LED 12 VDC 1 W 0.30 76254.00
Red LED 12 VDC 1 W 0.30 76255.00
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76290.00
Blue LED 12 VDC 1 W 0.30 76291.00
Amber LED 12 VDC 1 W 0.30 76292.00
Green LED 12 VDC 1 W 0.30 76294.00
Red LED 12 VDC 1 W 0.30 76295.00
IP68 static load 500 kg - transit speed 10 km/h - IK10
IP68 static load 500 kg - transit speed 10 km/h - IK10
IP68 static load 500 kg - transit speed 10 km/h - IK10
1-beam fixture, system power 1 W
2-beam fixture, system power 1 W
12-beam fixture, system power 1 W
electronic ballast available as accessory
electronic ballast available as accessory
electronic ballast available as accessory
68
Ø 65
10
10
48.5
48.5
48.5
Ø 65
10
10
Ø 65
10
40
79
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
469
technical sheetsWalkie LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76240.__
Blue LED 12 VDC 1 W 0.30 76241.__
Amber LED 12 VDC 1 W 0.30 76242.__
Green LED 12 VDC 1 W 0.30 76244.__
Red LED 12 VDC 1 W 0.30 76245.__
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76250.__
Blue LED 12 VDC 1 W 0.30 76251.__
Amber LED 12 VDC 1 W 0.30 76252.__
Green LED 12 VDC 1 W 0.30 76254.__
Red LED 12 VDC 1 W 0.30 76255.__
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 12 VDC 1 W 0.30 76290.__
Blue LED 12 VDC 1 W 0.30 76291.__
Amber LED 12 VDC 1 W 0.30 76292.__
Green LED 12 VDC 1 W 0.30 76294.__
Red LED 12 VDC 1 W 0.30 76295.__
IP68 static load 100 kg - IK07
IP68 static load 100 kg - IK07
IP68 static load 100 kg - IK07
1-beam fixture, system power 1 W
2-beam fixture, system power 1 W
12-beam fixture, system power 1 W
electronic ballast available as accessory
electronic ballast available as accessory
electronic ballast available as accessory
68
2838
.5
118
112
5075
215
250
85
6810
6×10
6
65
6580
79
470
technical sheetsWalkie LED
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling 13 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling 65 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling 45 fi xtures
38920.00
recess box for concrete 76268.00
471
technical sheetsWalkie LED
Description Code Picture
pole H=200 76237.__
pole H=500 76238.__
pole H=800 76239.__
floor anchoring bracket for pole 76266.00
bracket with anchor bolts for pole 76267.00
472
A compact, refined fixture offering maximum performance coupled with small dimensions.
design: Martini Staff
Walkie Talkie 65 LED
473
Satin-fi nish stainless steel fi xture with a total diameter of 72 mm that protrudes from the installation surface by 4 mm and has an overall size of barely 34 mm.Capable of withstanding static loads of 500 kg and Class IK09 mechanical shocks. IP68 protection rating, brand F.Available with fl at or rounded glass.
General features and technical details
recessed fi xturesWalkie Talkie 65 LED
Ø 72
34
Ø 72
34
4
48.5
48.5
IP68 IK09 500 kg
IP68 IK09 500 kg
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
474
technical sheetsWalkie Talkie 65 LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 24 VDC 1 W 0.15 76440.00
Blue LED 24 VDC 1 W 0.15 76441.00
Amber LED 24 VDC 1 W 0.15 76442.00
Green LED 24 VDC 1 W 0.15 76444.00
Red LED 24 VDC 1 W 0.15 76445.00
flat glass
Description Voltage LED power W [kg] Code Technical drawing [mm]
Cool White LED 24 VDC 1 W 0.15 76430.00
Blue LED 24 VDC 1 W 0.15 76431.00
Amber LED 24 VDC 1 W 0.15 76432.00
Green LED 24 VDC 1 W 0.15 76434.00
Red LED 24 VDC 1 W 0.15 76435.00
rounded glass
electronic ballast available as accessory
electronic ballast available as accessory
5075
215
250
65
Ø22
6550
3827
112
16
5580
235
270
475
technical sheetsWalkie Talkie 65 LED
Description Code Picture Technical drawing [mm]
recess box for concrete 76448.00
IP40 electronic ballast110-240/24 VDC 20 Wsuitable for controlling up to 17 fi xtures
76449.00
IP67 electronic ballast230-240/24 VDC 70 Wsuitable for controlling up to 65 fi xtures
38934.00
IP67 electronic ballast220-240/24 VDC 150 Wsuitable for controlling up to 145 fi xtures
38935.00
477
Square-shaped recessed fi xture for wall or fl oor installation, size 101x101 depth 40 mm.Powder-coated die-cast anodised aluminium body. Tempered 3 mm thick glass with anti-slip glossy or ice fi nish. Capable of withstanding a static load of 1,000 kg at a speed of 30 km/h and Class IK09 mechanical shocks. IP67 protection rating, brand F.
Also available in the coloured LED versions.
General features and technical details
signalling lightBrikko LED
101
101
101
101
4040
2838
.5
118
112
5075
215
105105
105
250
85
6810
6×10
6
71
IP67
IP67
system power output 1 W
system power output 1 W LEDCool
White (CW)
1W
479
technical sheetsBrikko LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
White LED * 12 V 1 W 0.70 75090.00__
Blue LED 12 V 1 W 0.70 75091.00
Amber LED 12 V 1 W 0.70 75092.00
Green LED 12 V 1 W 0.70 75094.00
Red LED 12 V 1 W 0.70 75095.00
1,000 kg at 30 km/h
1,000 kg at 30 km/h
transparent glass
glass with anti-slip surface treatment
Description Voltage LED power W [kg] Code Technical drawing [mm]
White LED * 12 V 1 W 0.70 75080.00__
Blue LED 12 V 1 W 0.70 75081.00
Amber LED 12 V 1 W 0.70 75082.00
Green LED 12 V 1 W 0.70 75084.00
Red LED 12 V 1 W 0.70 75085.00
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 75080.00WW)
* add the suffi x WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 75090.00WW)
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 13 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 65 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 45 fi xtures
38920.00
recess box for concrete 93460.00
electronic ballast available as accessory
electronic ballast available as accessory
481
Recessed floor-mounted fixture comprising a die-cast aluminium support onto which a tempered moulded glass (thickness 7 cm) is attached; the latter is acid-etched and satin-fi nished for a unique aesthetic effect. Capable of withstanding a static load of 1,000 kg at a speed of 30 km/h and Class IK09 mechanical shocks. IP67 protection rating, brand F.
marker lightSasso LED
General features and technical details
482
Available with high-power LEDs in various colours and in the RGB version.
General features and technical details
marker lightSasso LED
120
8077
IP67 IK09
IP67 IK09
LEDRGB
3W
LEDCool White
(CW)
1W
484
technical sheetsSasso LED
Description Voltage LED power W [kg] Code Technical drawing [mm]
Warm white LED 9-15 VDC 1 W 0.70 76278.00
Cool White LED 9-15 VDC 1 W 0.70 76270.00
Blue LED 9-15 VDC 1 W 0.70 76271.00
Amber LED 9-15 VDC 1 W 0.70 76272.00
Green LED 9-15 VDC 1 W 0.70 76274.00
Red LED 9-15 VDC 1 W 0.70 76275.00
RGB LED 3 W 0.70 76276.00
1,000 kg - maximum transit speed 30 km/h
1,000 kg - maximum transit speed 30 km/h
system power output 1 W
DMX512 colour controller see page 496 and subsequent
electronic ballast available as accessory
2838
.5
118
112
5075
215
250
85
6810
6×10
6
485
Optional accessories
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 13 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 65 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 45 fi xtures
38920.00
487
Recessed floor-mounted fixture comprising a die-cast aluminium support onto which a tempered moulded glass (thickness 7 cm) is fixed; the latter is acid-etched and satin-finished for a unique aesthetic effect. Capable of withstanding a static load of 1,000 kg at a speed of 30 km/h and Class IK09 mechanical shocks. IP67 protection rating, brand F. Available with high-power LEDs in various colours and in the RGB version. Available with base dimensions measuring 88x88 and 76x76 mm.
General features and technical details
recessed fixturesPorfido LED
88×88×75
IP67 IK09
IP67 IK09
1,000 kg
LEDRGB
3W
LEDCool
White (CW)
1W
89
89
80
80
81
488
technical sheetsPorfido LED
DMX512 colour controller see page 496 and subsequent
Description Voltage LED power W [kg] Code Technical drawing [mm]
Warm white LED 9-15 VDC 1 W 0.70 76288.00
Cool White LED 9-15 VDC 1 W 0.70 76280.00
Blue LED 9-15 VDC 1 W 0.70 76281.00
Amber LED 9-15 VDC 1 W 0.70 76282.00
Green LED 9-15 VDC 1 W 0.70 76284.00
Red LED 9-15 VDC 1 W 0.70 76285.00
RGB LED 3 W 0.70 76286.00
system power output 1 W
1,000 kg - maximum transit speed 30 km/h
electronic ballast available as accessory
76×76×61
2838
.5
118
112
5075
215
250
85
6810
6×10
6
IP67 IK09
IP67 IK09
LEDRGB
3W
LEDCool
White (CW)
1W
77,5
77,5
71
71
67
489
technical sheetsPorfido LED
DMX512 colour controller see page 496 and subsequent
Description Voltage LED power W [kg] Code Technical drawing [mm]
Warm white LED 9-15 VDC 1 W 0.50 76398.00
Cool White LED 9-15 VDC 1 W 0.50 76390.00
Blue LED 9-15 VDC 1 W 0.50 76391.00
Amber LED 9-15 VDC 1 W 0.50 76392.00
Green LED 9-15 VDC 1 W 0.50 76394.00
Red LED 9-15 V 1 W 0.50 76395.00
RGB LED 3 W 0.50 76396.00
system power output 1 W
1,000 kg - maximum transit speed 30 km/h
1,000 kg - maximum transit speed 30 km/h
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 13 fixtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 65 fixtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 45 fixtures
38920.00
electronic ballast available as accessory
88×88×75
76×76×61
IP65 IK09
IP65 IK09
LEDCool
White (CW)
1W
LEDCool
White (CW)
1W
88,5
88,5
80
80
76
76
76
71
71
61
490
Porfido LED palettotechnical sheets
Description Voltage LED power W [kg] Code Technical drawing [mm]
Warm white LED 9-15 VDC 1 W 0.70 76424.00
Cool White LED 9-15 VDC 1 W 0.70 76400.00
Blue LED 9-15 VDC 1 W 0.70 76401.00
Amber LED 9-15 VDC 1 W 0.70 76402.00
Green LED 9-15 VDC 1 W 0.70 76404.00
Red LED 9-15 VDC 1 W 0.70 76405.00
Description Voltage LED power W [kg] Code Technical drawing [mm]
Warm white LED 9-15 VDC 1 W 0.50 76425.00
Cool White LED 9-15 VDC 1 W 0.50 76410.00
Blue LED 9-15 VDC 1 W 0.50 76411.00
Amber LED 9-15 VDC 1 W 0.50 76412.00
Green LED 9-15 VDC 1 W 0.50 76414.00
Red LED 9-15 VDC 1 W 0.50 76415.00
system power output 1 W
system power output 1 W
electronic ballast available as accessory
electronic ballast available as accessory
2838
.5
118
112
5075
215
250
85
6810
6×10
6
68 79
HH
88
76
491
technical sheetsPorfi do LED paletto
Description Code Picture Technical drawing [mm]
IP40 electronic ballast230-240/12 VDC 15 Wsuitable for controlling up to 13 fi xtures
38919.00
IP67 electronic ballast230-240/12 VDC 70 Wsuitable for controlling up to 65 fi xtures
38933.00
IP66 electromagnetic ballast (non-stabilised)230/12 VDC 50 Wsuitable for controlling up to 45 fi xtures
38920.00
spike for ground installation 76409.00
anchor bolts kit for concrete 76419.00
Description H [mm] Code Picture
pole for Porfi do88x88
50 76406.__
150 76407.__
750 76408.__
pole for Porfi do76x76
50 76416.__
150 76417.__
750 76418.__
493
General features and technical details
The poles are made using S235JR steel and are hot galvanised in compliance with the EN40-4 standard. They are also powder-coated using satin-fi nish grey polyester paint.For poles up to 5.5 m above the ground, the terminal board slot measures 132×38 mm.For poles above 6 m above the ground, the terminal board slot measures 186×45 mm. All poles are supplied with a protective end cap, terminal board (for 1 fuse - not included), terminal board cover and anchoring plate for fl anged poles.Poles measuring 8 m and 10 m can be constructed in two pieces to be assembled using stainless steel bolts.
Poles
tapered
conical
cylindrical
two-piece cylindrical
494
General features and technical details
With 132×38 mm slot Four-pole, 3-way monoblock terminal board with in/out power supply terminal up to size 6 mm2 and branch terminal to the lamp up to size 2.5 mm2, double insulated (Class II).Disconnectable fuse-holder (fuse not included).
With 186×45 mm slot Four-pole, 3-way monoblock terminal board with in/out power supply terminal up to size 16 mm2
and branch terminal to the lamp up to size 2.5 mm2, double insulated (Class II).Disconnectable fuse-holder (fuse not included).
Lid for slot covering - IP43
All poles are approved for 1 street fixture in zone 7 (wind speed 29 m/s).When mounting two or more fixtures on a single pole, a stability test must be requested by contacting the Martini S.p.A. customer service.
in-depth lookPoles
270
270
180
180
132
132
500
800
186
186
38
38
45
45
1000
350
600
1500
1800
1000
350
350
250
250
68 86 79
68 86 79
495
technical sheetsPoles
Buried poles
Description Ø top [mm] L [mm] above ground Th. [mm] Code
tapered
60 4000 3 75822.__
60 4500 3 75823.__
60 5000 3 75866.__
60 5500 3 75867.__
60 6000 3 75868.__
conical
60 4000 3 76040.__
60 5000 3 76041.__
60 6000 3 76042.__
60 4000 4 75862.__
60 5000 4 75864.__
60 6000 4 75865.__
60 8000 4 75845.__
60 10000 4 75847.__
cylindrical
89 3500 3 75800.__
89 4500 3 75801.__
102 4000 3 75820.__
102 5000 3 75802.__
102 5500 3 75870.__
102 7000 4 75826.__
120 5000 3 75803.__
120 6000 3 75804.__
140 8000 3 75805.__
140 8000 4 75806.__
170 10000 4 75808.__
two-piece cylindrical
190/120 8000 3 75807.__
190/120 10000 4 75809.__
Poles with anchoring plate
Description Ø top [mm] L [mm] above ground Th. [mm] Code
tapered
60 4000 3 75824.__
60 4500 3 75825.__
60 5000 3 75873.__
60 5500 3 75874.__
60 6000 3 75875.__
cylindrical
89 3500 3 75810.__
89 4500 3 75811.__
102 4000 3 75821.__
102 5000 3 75812.__
102 5500 3 75871.__
102 7000 4 75827.__
120 5000 3 75813.__
120 6000 3 75814.__
140 8000 3 75815.__
140 8000 4 75816.__
170 10000 4 75818.__
two-piece cylindrical
190/120 8000 3 75817.__
190/120 10000 4 75819.__
for poles up to 6 m for poles above 6 m
497
the philosophy
Light control systems
Controller
Our approach aims to create straightforward, reliable and design-oriented light control systems and lighting schemes with the awareness that if light is a highly distinctive element of an environment, the light control system must not be a purely technical element to be concealed. On a given day we might desire the maximum amount of light possible, whereas the following evening the light of a candle may be the ideal choice. For this reason, we offer flexible programming and control systems for lighting scenes: RGB LED changes colour MONOCHROME LED for programming, scene control and touch dimming. Mixed systems for LED and fluorescent fixtures with analogue electronic ballasts controllable via a single lighting scheme.
498
code 76498.00D Motion DLC 4
ControlEmotion1Interface for controlling and managing lighting scenes with the DMX512-A protocol, inclusive of PWM direct output for controlling LED STIPS. It can function as a MASTER module and directly perform the desired colour adjustments through the touch-sensitive front panel. The various touch-sensitive buttons allow for selecting and adjusting the colour or selecting and running the lighting scheme, including the sequence speed. A specific LED dimming touch-sensitive button allows for using the product for controlling monochrome LED systems, and for performing dimming and scene memorisation. In this case, 0-10V analogue dimmers must be used and interfaced with the DMX ANALOGUE CONVERTER control box appearing in the catalogue. PWM output for direct control of the LED STIPS. An AC/DC ballast is required (to be ordered separately).
Main features:_Adjustment of all colours._Dimming from 1 to 100%._Front panel inclusive of all functions through touch-sensitive buttons._4 touch-sensitive buttons for memorising static lighting scenes._4 touch-sensitive buttons for running pre-set dynamic lighting scenes._Status signalling and programme running LED. _PWM output for direct control of the LED Strips (2A per channel, 6A total)._12-24 VDC power supply through external ballast to be ordered separately._RGB LEDs with indication of the output colour setting.
499
code 76499.00
Interface for controlling and managing lighting scenes with the DMX512-A protocol, inclusive of PWM direct output for controlling LED STRIPS. Inclusive of IR remote control with all the functions. One remote junction box with USB connector for connection to the PC and software for programming and memorising lighting scenes with 128 MB internal memory. It is therefore possible to programme using the software and memorise all the data in the Junction Box, or through the touch-sensitive buttons on the front panel. The various touch-sensitive buttons allow for selecting and adjusting the colour, selecting and running the lighting scheme - including the sequence speed - and intervening to perform instant custom settings. A specific LED dimming touch-sensitive button allows for using the product for controlling monochrome LED systems, and for performing dimming and scene memorisation. In this case, 0-10V analogue dimmers must be used and interfaced with the DMX ANALOGUE CONVERTER control box appearing in the catalogue. PWM output for direct control of the LED STRIPS, for which an AC/DC ballast is required (to be ordered separately).
ControlEmotion 2
D Motion DLC 16
Main features:_Adjustment of all colours._Dimming from 1 to 100%._Front panel inclusive of all functions through touch-sensitive buttons._4 touch-sensitive buttons for memorising static lighting scenes._8+8 touch-sensitive buttons for running pre-set dynamic lighting scenes._Status signalling and programme running LED _PWM output for direct control of the LED Strips (2A per channel, 6A total)._12-24 VDC power supply through external ballast to be ordered separately._RGB LEDs with indication of the output colour setting
500
Code 76496.00DMX512 homepro
DMX512 homepro colour controller for recessed installation on walls
Interface with LCD screen for controlling and running lighting scenes with DMX512-A communication protocol, inclusive of an external stabilised ballast. It can function as a MASTER module and directly perform the desired colour adjustments by selecting pre-loaded or customisable static scenes, or perform pre-loaded or customisable dynamic programmes. All the functions are controlled through configuration buttons located on the front panel, while the effected functions appear on the LCD screen. The controller may control 2 DMX systems for a total of 1,024 channels; moreover, it can configure an additional 3 channels that can be used as 1-10V outputs or as inputs for activating functions. An internal memory records personal static scenes or customised programmes, and includes (standard feature) 25 pre-memorised static scenes and 14 dynamic programmes.
It also has an internal calendar for standalone events programming with automatic activation, and allows for selecting the menu language on the display.Scenes and programmes can be controlled and run through a LAN network connection that also includes the WEB ACCESS function.
Main features: _Adjustment of all DMX channels with consequent control of all colours. _Dimming from 1 to 100%. _Electrically isolated DMX bus. _Control of two DMX systems with 512 channels each. _External ballast supplied as a standard feature. _Possibility of configuring 3 analogue outputs or 3 contact inputs for activating events._Internal clock with CMOS battery for 6 months. _Monochrome 128x64 pixel display with modifiable RGB background colour.
501
DMX512 hometouchCode 76495.00
DMX512 hometouch colour controller for wall installation
Main features: _Adjustment of all colours. _Adjustment of the white colour temperature. _Dimming from 1 to 100%. _Front panel inclusive of all functions through touch-sensitive buttons. _4 touch-sensitive buttons for memorising static lighting scenes. _4 touch-sensitive buttons for running pre-set dynamic lighting scenes. _Status signalling and programme running LED. _Button locking function. Electrically isolated DMX bus. _32 KB memory space.
Interface for controlling and running lighting scenes through the DMX512-A communication protocol. It can function as a MASTER module and directly perform the desired colour adjustments through the touch-sensitive front panel. Possibility of memorising up to 4 static lighting scenes set by the customer. It is also possible to perform one of the 4 programmes with internally memorised dynamic lighting scenes. The controller can also function in SLAVE mode so the user can control lighting scenes from multiple points, which facilitates control of the connected devices.
502
DMX analogue converter
DMX analogue converter
Interface for signal conversion from DMX to analogue 0-10V. Thanks to this interface, it is possible to create a complex DMX-based lighting scheme while also controlling and dimming monochrome LED-based fi xtures, or fl uorescent lamps that use analogue 0-10V electronic ballasts. Main features: Signal conversion from DMX-512 to 0-10V analogue on 72 channels. • Front panel display that visualises the DMX address. • Possibility of creating pre-programmed lighting scenes.• +(-)10V, +(-)12V to +(-)15V analogue output.
code 76500.00
503
RGB ballast IP65 230/240V 50-60Hz180x130x80 mmcode 76492.00
RGB ballast and signal amplifi er
Signal amplifi er DMX512 IP65180x130x80 mmcod. 76494.00
D MOTION DLC 16 controller
DMX splitter amplifi er
Lux 180 RGB
Lux 260 RGB
Walkie Car 230
DMX converter
504
DMX protocolWiring diagram
DMX protocol operation diagram
Connection of the DMX signal requires a cable conforming to the EIA RS-485 standard and having the following features:-2 conductors plus shielding.-110-120 Ohm impedance. -Low capacity.-Maximum 250 kbaud transmission speed.Observe the following indications to prevent any malfunctions:-The maximum recommended length of the DMX signal cable is 150 m. Within this length, a maximum of 32 fi xtures can be connected.-Avoid parallel paths between DMX cables and power lines.-Insert a 120 ohm 1/4 W resistor at the end of the DMX cable, between cable A (DMX +) and cable B (DMX -).-Never connect the DMX cable shield to earth.-Never effect Y-shaped branches of the DMX cable (use a DMX Booster/Splitter).If any malfunctions occur due to disturbances on the DMX line, if the lines are longer than the maximum recommended length or if there are more than 32 devices to be controlled, one or more DMX Booster/Splitter devices must be inserted.
NB: the above-mentioned recommendations aim to ensure the correct operation of a DMX-based system. The information indicated herein must be regarded as a broad outline and is not comprehensive.
control gear
control gear
control gear
control gear
Dimmable fl uorescent light1-10v
control gear
control gear
505
SECOND DIGITThe degree of protection against the penetration of liquids indicates:_0 Not protected.
_1 Fixture protected against dripping liquids.
_3 Fixture protected against rain.
_4 Fixture protected against splashing liquids.
_5 Fixture protected against water jets.
_6 Fixture protected against pressurised water jets.
_7 Fixture watertight when immersed.
_8 -m Fixture watertight when submerged.
for example: IP65
classifi cationSymbols used
fi xture classifi cation in accordance with electrical insulation class.
Class Iwith functional electrical insulation and connected to the electrical system's earth circuit.
the fi xture can be installed on normally infl am-mable surfaces.
the fi xture is suitable for installation in furniture.fi xture classifi cation in accordance with the fl ammability class of the support surfaces.
Class IIwith double insulation and/or reinforced insulation that does not require earthing.
Class IIIdesigned for connection to low-voltage power supply circuits.
IP protection ratingThe lighting fi xture's protection rating is indicated by the prefi x IP (International Protection) followed by two signifi cant fi gures, the fi rst of which identifi es the degree of protection against the penetration of solids and the second against the penetration of liquids (ref: EN 60529).
The prefi x IK indicates the fi xture's degree of resistance to mechanical impacts in accordance with the EN 50102 standard.
FIRST DIGITThe degree of protection against the penetra-tion of solids indicates:2_ Fixture capable of withstanding the
penetration of solids with a diameter exceeding 12 mm.
3_ Fixture capable of withstanding the penetration of solids with a diameter exceeding 2.5 mm.
4_ Fixture capable of withstanding the penetration of solids with a diameter exceeding 1 mm.
5_ Fixture protected against dust.
6_ Fixture completely protected against dust.
IMPACT RESISTANCE RATINGThe impact resistance rating indicates:
IK00 Not protected.
IK01 Protected against impacts with 0.15 J energy.
IK02 Protected against impacts with 0.2 J energy.
IK03 Protected against impacts with 0.35 J energy.
IK04 Protected against impacts with 0.5 J energy.
IK05 Protected against impacts with 0.7 J energy.
IK06 Protected against impacts with 1 J energy.
IK07 Protected against impacts with 2 J energy.
IK08 Protected against impacts with 5 J energy.
IK09 Protected against impacts with 10 J energy.
IK10 Protected against impacts with 20 J energy.
Standards and certifi cations
The lighting fi xtures are designed in accordance with ISO EN 9001-2008 quality procedures, and constructed in compliance with the European EN 60598-1 standards.CE-marked products satisfy all applicable European directives and guarantee that the product can be sold freely in all countries belonging to the European Economic Area.
NOTE: IP68 fi xture only suitable for installation where continuous immersion is an accidental condition and does not exceed a depth of 1.3 m.
IK impact resistance rating
506
specific symbols usedSymbols used
minimum distance0.5 metres
minimum distance0.8 metres
max. surface area exposed to the wind (m²)0.082 m²
RGBround recess hole size (mm)
square recess hole size (mm)
linear plasterboard cut
D.A.L.I. dimmer
1-hour continuous emergency operation
ceiling-mounted fixturemaximum temperature (°C) on the glass / fixture
pre-ignition with support lamp
electromagnetic control gear
electronic control gear
static load
5,000 kg
emission characteristics
asymmetrical optic
symmetrical optic
roto-symmetrical optic
street optic
sidewalk optic
super spot optic
spot optic
medium optic
flood optic
wide flood optic
dual-emission flood optic
wallwasher optic
asymmetrical optic
indirect light
direct/indirect light
direct/indirect light
direct/indirect light
general light
dimmable electronic control gear
wall-mounted with indirect emission
wall-mounted with direct emission
lighting
YouYo
u
MARTINI S.p.A.Lighting Industries
Via Provinciale, 2441033 - Concordia s/S - Modena (Italy)
tel. +39 0535 48111 - fax +39 0535 48220
web: www.martinilight.come-mail: [email protected]
cod. 9900782_02