Martin Carr - Carrs Silver
Transcript of Martin Carr - Carrs Silver
1
Martin Carr
From: Marc Horner [[email protected]]Sent: 02 December 2013 17:24To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS Job 444 - Lifting Tackle PT10 COMPLETE
Martin, Down as a “Fill in” ‐ no risk to h&s – probably beyond economic repair, would suggest it’s OK to keep using until it becomes more of a Risk Marc
From: Martin Carr [mailto:[email protected]] Sent: 02 December 2013 08:54 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 October 2013 09:32 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 06/11/2013 07:07 Not chased due Marc holiday Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise on this job? Martin.
2
From: Martin Carr [mailto:[email protected]] Sent: 29 August 2013 09:53 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 August 2013 09:37 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:48 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:20 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me know on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 June 2013 10:48 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise when this job will be complete? Martin.
3
From: Martin Carr [mailto:[email protected]] Sent: 24 May 2013 10:06 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise what is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 May 2013 15:34 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Marc, Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle PT10 Can you advise on progress of this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
4
Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:38 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle
5
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 444 - Lifting Tackle Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS Job 444 - Lifting Tackle Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: RE: HS Job 444 - Lifting Tackle
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle
6
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:16 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle Please advise.
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 11:56 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 444 - Lifting Tackle The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
444. http://hs.carrs‐silver.co.uk/liftingu1.pdf 10 May 2010 Work required to PT10 04 June 2010 Job Outstanding 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
7
Martin Carr
From: Marc Horner [[email protected]]Sent: 29 November 2013 14:24To: 'Martin Carr'; 'Jim Storey'Subject: RE: Wilmat 20195 COMPLETE
Note – this is a duplicate of “Manual Fork Truck FT11044” New Seals Fitted 31‐10‐2013 ‐ I cannot see where there are any further leaks, (there is Oil on the plunger rod, as would be expected on a hydraulic plunger, but no weeping oil) “Fork Deflected” attempting to re‐bend this with damage the forks, After speaking with the inspector in May 3013, we are working around 60‐100kg, less than 25% swl they will be used as are until they are noted as requiring replacement Job Complete Marc
From: Martin Carr [mailto:[email protected]] Sent: 29 November 2013 09:24 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 November 2013 09:35 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 October 2013 10:20 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: RE: Wilmat 20195 Marc, Can you advise how this job is progressing? Martin.
8
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:39 To: 'Martin Carr'; 'Jim Storey' Subject: RE: Wilmat 20195 Martin, This is on the maintenance list, for new seals, the leak is minor, on checking the oil level approc 20ml was needed to fill the reservoir Marc
From: Martin Carr [mailto:[email protected]] Sent: 19 September 2013 09:46 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 August 2013 09:48 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 July 2013 09:28 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Wilmat 20195 Marc, Can you let me have an updated on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: RE: Wilmat 20195 Marc, Can you let me have an update on this job? Martin.
9
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: Wilmat 20195 Marc, Work is required to this item, please advise? Martin. http://hs.carrs‐silver.co.uk/liftingu1.pdf
10
Martin Carr
From: Marc Horner [[email protected]]Sent: 28 November 2013 08:39To: 'Martin Carr'Subject: RE: Pallett Truck 1035008 COMPLETEAttachments: HS Job 442 - Lifting Tackle (34.3 KB); Pallett Truck 1035008 (12.7 KB)
Martin Job Complete (see attached items which can be closed) Marc
From: Martin Carr [mailto:[email protected]] Sent: 27 November 2013 11:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 November 2013 09:48 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 October 2013 09:18 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: RE: Pallett Truck 1035008 Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 19 September 2013 10:07 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Martin, This job is down as a “Fill in” for Maintenance,
11
Marc
From: Martin Carr [mailto:[email protected]] Sent: 18 September 2013 09:42 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 August 2013 10:39 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 STILL awaiting an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 July 2013 09:16 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, Still waiting?? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 June 2013 09:53 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Can you let me have an update on this job? Martin.
12
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:05 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Pallett Truck 1035008 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Pallett Truck 1035008 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
13
Martin Carr
From: Marc Horner [[email protected]]Sent: 27 November 2013 09:24To: 'Martin Carr'Subject: RE: Graphite Casting COMPLETE
I have spoken to Paul Wild, He has cleaned and hovered out the bags, filters and unit Marc
From: Martin Carr [mailto:[email protected]] Sent: 26 November 2013 09:55 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Graphite Casting Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 November 2013 09:36 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Graphite Casting Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 October 2013 16:50 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Graphite Casting Marc, The filter bags need changing on this machine. See http://hs.carrs‐silver.co.uk/castinggraphite.pdf
14
Martin Carr
From: Marc Horner [[email protected]]Sent: 22 November 2013 15:32To: 'Martin Carr'Subject: RE: Fork Truck
Martin, This has been reported to Petermans Multiple times when they come to service the truck, the advice is that the mast pivot bearing/bush do not require replacement and are perfectly serviceable. Unless legally required? – I consider a Driver restraint unnecessary for our site, smooth ground, 1 truck, If any driver was going fast enough to require one they would be in procedure anyway Marc
From: Martin Carr [mailto:[email protected]] Sent: 21 November 2013 15:44 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Fork Truck Marc Work is required on the Fork truck. Refer http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
15
Martin Carr
From: Martin Carr [[email protected]]Sent: 14 November 2013 11:23To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 4 COMPLETED - SEE REPORT IN PDF
Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 October 2013 17:49 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 4 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 October 2013 10:51 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 4 Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:36 To: 'Marc Horner'; 'Martin Carr' Subject: RE: Press 4 09/09/2013 09:14 Deferred due Marc holiday Marc, Can you advise when this job will be doen? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 11 July 2013 09:14 To: 'Martin Carr' Subject: RE: Press 4
16
This press is currently not in operation, We have to incorporate guard master switches into the safety circuit, and will not be allowing the press back into operation until insurance inspection is satisfactory Marc
From: Martin Carr [mailto:[email protected]] Sent: 11 July 2013 08:25 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 4 Marc, Can you advise when this is due to be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:30 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 4 Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/press4.pdf Martin.
17
Martin Carr
From: Martin Carr [[email protected]]Sent: 09 December 2013 08:48To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: Manual Platform MH11097
Follow Up Flag: Follow upFlag Status: Flagged
How did you get on? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 03 December 2013 17:42 To: 'Martin Carr' Subject: RE: Manual Platform MH11097 Im going looking again tomorrow, I will find it and advise
From: Martin Carr [mailto:[email protected]] Sent: 03 December 2013 11:30 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 November 2013 09:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 October 2013 08:33 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Marc, Still awaiting an update on this job? Martin.
18
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:39 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:11 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 02/09/2013 09:05 Marc on holiday at present I am STILL awaiting a reply, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 23:44 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Manual Platform MH11097 Well? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 12:52 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Manual Platform MH11097 Marc, Has this been binned as yet? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 14 June 2013 08:34 To: 'Martin Carr' Subject: RE: Manual Platform MH11097 I cant find it I will look round this afternoon when the factory is shut and it will be binned Marc
From: Martin Carr [mailto:[email protected]] Sent: 13 June 2013 09:41
19
To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you update me on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 June 2013 10:08 To: 'Marc Horner'; '[email protected]'; 'Jim Storey' Subject: RE: Manual Platform MH11097 Marc, Can you advise if they will/have been scrapped? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 14:03 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Martin, To replace the Lift cylinder diverter sheave flanges it would be cheaper to replace the pallet truck Marc
From: Martin Carr [mailto:[email protected]] Sent: 09 May 2013 14:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Manual Platform MH11097 Can you let me have an update to this job? Martin.
20
From: Martin Carr [mailto:[email protected]] Sent: 17 May 2012 18:15 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Manual Platform MH11097 Work is required to this item. http://hs.carrs‐silver.co.uk/liftingu1.pdf
21
Martin Carr
From: Martin Carr [[email protected]]Sent: 09 December 2013 08:48To: 'Martin Carr'; 'Marc Horner'Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13Attachments: image001.jpg
Follow Up Flag: Follow upFlag Status: Flagged
Marc,
Can you advise on this job?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 13 November 2013 09:15 To: 'Martin Carr'; 'Marc Horner' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Can you let me have an update on this job?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 October 2013 09:29 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Can you advise on this job?
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 03 October 2013 11:29 To: 'Martin Carr' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Martin,
The Builder who was going to put up the room for the moved knife handle area quoted on this, and as this is delayed the wall was also
There are no risks to the wall at the moment
Marc
22
From: Martin Carr [mailto:[email protected]] Sent: 30 September 2013 10:16 To: 'Martin Carr'; 'Marc Horner' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Can you advise on this job?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 August 2013 13:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
05/09/2013 09:31 Deferred due to Marc on holiday
Marc,
What has become of this wall?
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 July 2013 11:12 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
Has this wall been fixed now?
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 May 2013 08:51 To: Martin Carr Subject: FW: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
FYI – report from Structural Engineer on wall in despatch.
18/06/2013 09:34 Has wall been fixed
From: Andy Jones [mailto:[email protected]] Sent: 16 May 2013 11:38 To: [email protected] Subject: 35913 - Carrs of Shefield, Holbrook. Inspection 10-05-13
Marc,
We confirm for your records our inspection of cracking in an internal wall in the factory on 10 May 2013. The wall is built using concrete blocks tied to the steel portal column at one end and to an secondary steel stability post at the other end. The wall length is in the order of 7m, broken by a double door at approximately one third from the portal
23
column end. A near vertical crack has developed from the lintel bearing to the top of the wall. This is shown on the attached sketch 35913/SK01.
We believe the crack has developed in response to normal building thermal movements, possibly aggravated by the occasional collision from fork lift truck movements in the factory. We advised you that the crack does not affect the stability of the wall, nevertheless it would be prudent to provide nominal steel bar stitching across the crack before pointing and re-decorating. These ties are to help distribute the movement from the crack back into the wall to stop fretting on the crack line in the future.
We have suggested Helifix Crack Stitching as a recognised proven proprietary crack repair system. Details are shown on the attached PDF copy of the manufacturers literature for your reference.
If there should be any further queries please contact us again.
Regards
Andy Jones (Associate)
Eastwood & Partners (Consulting Engineers) Ltd St Andrew's House, 23 Kingfield Road, Sheffield, S11 9AS Web: www.eastwoodandpartners.com Tel. 0114 2554554 Email: [email protected] Fax. 0114 2554330 Please Read: Information in this message is confidential and may be legally privileged. It is intended solely for the person to whom it is addressed. If you are not the intended recipient, please notify the sender and delete the message from your system immediately. It is your responsibility to check this email for viruses and Eastwood & Partners cannot be held responsible for any resulting loss or damage in the event that this message or any attachments contains a virus.
24
Martin Carr
From: Martin Carr [[email protected]]Sent: 09 December 2013 08:47To: 'Martin Carr'; 'Marc Horner'Subject: RE: HS 431. Extractor hoods for spray shop drying process
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 13 November 2013 09:15 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, I need an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 October 2013 09:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 September 2013 10:16 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 August 2013 13:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process 05/09/2013 09:31 Deferred due to Marc on holiday
25
Still waiting for an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 July 2013 11:15 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 09:23 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, I am still awaiting an update on this item? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 June 2013 09:32 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Now that summer is here can you advise on the timetable for this project? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 14 March 2013 22:36 To: 'Martin Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process Hi Martin, At present I need to re‐look at the ducting in the entire area due to some comments from the LEV inspector, I want to split the Plating from the spray shop (with solid doors rather than flaps), open up the filters in the walls to allow more air to circulate, re‐route the 2 into 1 ducting from resin area and Left hand booth and probably remove the resin booth altogether Intending to start this in the summer if that’s OK Marc
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2013 09:48 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process
26
Marc, Can you advise what is happening with regard to this job? Most of the fume does seem to be coming from the drying process.. Perhaps we need to get an extraction company in to provide come information and maybe a quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 March 2013 10:42 To: 'Martin Carr'; 'Jim Storey' Cc: '[email protected]' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, Can you advise what is happening with regard to this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 February 2013 22:46 To: 'Martin Carr'; 'Jim Storey' Cc: '[email protected]' Subject: RE: HS 431. Extractor hoods for spray shop drying process Marc, What is the deal with this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:26 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:00 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 June 2012 11:17 To: 'Martin Carr'; 'Jim Storey'
27
Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process There has been a discussion about this and a company has come in to quote for a few items. The main points are;
1. The electrical to be changed for explosive atmospheres with regard to the enclosed spray shop 2. Installing a fan so that suitable air can enter the building, equal to what is being extracted. 3. Change the existing 3 spraybooths and resin mixing areas so that only extraction that is required is being
used. 4. Get some quotes for the heating in this area to be improved.
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:41 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:47 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 431. Extractor hoods for spray shop drying process
28
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 431. Extractor hoods for spray shop drying process Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS 431. Extractor hoods for spray shop drying process Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process
29
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:19 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process Please advise
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 11:22 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: 431. Extractor hoods for spray shop drying process The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
431. Extractor hoods for spray shop drying process 24 February 2010 Jim to investigate 04 June 2010 Job outstanding, but the area is being re‐located, so will be done at that time 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
30
Martin Carr
From: Martin Carr [[email protected]]Sent: 07 December 2013 13:34To: 'Marc Horner'Cc: [email protected]; 'Martin Carr'Subject: RE: Despatch Heater
Follow Up Flag: Follow upFlag Status: Flagged
And the approx finish date for this project? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 07 December 2013 11:05 To: 'Martin Carr' Cc: [email protected] Subject: RE: Despatch Heater Martin, This is a bigger job than expected, Just fitting a deflector plate will not achieve what we need, We are going to drop the heater buy approx. 1m, we have salvaged a section of flue from an old heater and now need half a day to move the unit, Marc
From: Martin Carr [mailto:[email protected]] Sent: 06 December 2013 09:49 To: 'Martin Carr'; 'Marc Horner' Cc: [email protected] Subject: RE: Despatch Heater Marc, Has this now been done? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2013 18:43 To: 'Marc Horner' Cc: [email protected]; 'Martin Carr' Subject: RE: Despatch Heater
From: Marc Horner [mailto:[email protected]] Sent: 22 November 2013 15:41 To: 'Martin Carr' Subject: RE: Despatch Heater Due to the weather – I will aim to have this done before the 6th Dec
31
Marc
From: Martin Carr [mailto:[email protected]] Sent: 21 November 2013 15:28 To: 'Marc Horner' Subject: RE: Despatch Heater Marc, No one said the job is an easy one.. if it were any fool would be doing it.. All that I ask is that the daily e‐mails I sent through asking for updates gets a reply all, with an approximate w/c date that it will be done. Clearly you cannot do everything at once, but this way people will know when things will get done. Martin.
From: Marc Horner [mailto:[email protected]] Sent: 21 November 2013 15:21 To: 'Martin Carr' Cc: 'Carrs Despatch' Subject: RE: Despatch Heater Its on the list, Maintenance staff have been busy on heaters in Packing/press shop etc Is this a priority over maintenance issues? Marc
From: Martin Carr [mailto:[email protected]] Sent: 21 November 2013 11:00 To: 'Martin Carr'; 'Marc Horner' Cc: 'Carrs Despatch' Subject: RE: Despatch Heater Marc, No progress has been made on this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 13 November 2013 15:15 To: 'Marc Horner' Cc: Carrs Despatch; 'Martin Carr' Subject: Despatch Heater Marc, Can you arrange for a deflector to be manufactured and installed? Martin.
From: Despatch Dept [mailto:[email protected]] Sent: 13 November 2013 15:14
32
To: Martin Carr Subject: Despatch Heater Martin The Heater in Despatch requires a deflector as all the heat goes upstairs and not into the packing area. As per conversation. Thanks Scott
33
Martin Carr
From: Martin Carr [[email protected]]Sent: 06 December 2013 09:49To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Cc: [email protected]: RE: HS Job Oakland Lift
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 November 2013 09:59 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you update me on the status of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2013 10:04 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2013 09:52 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 August 2013 10:55 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'
34
Cc: [email protected] Subject: RE: HS Job Oakland Lift 03/09/2013 19:10 Deferred due to Marc holiday Marc, I am still awaiting an update on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 July 2013 09:45 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, I am still awaiting this quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 June 2013 09:32 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise on this quote? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 June 2013 10:31 To: 'Marc Horner'; 'Jim Storey' Cc: '[email protected]' Subject: RE: HS Job Oakland Lift Marc, Were you going to get a quote for doing this? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:50 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift I think that as its non‐urgent and we constantly keep it to the bottom of the list I will try and sub‐contract the maintenance of this
From: Martin Carr [mailto:[email protected]] Sent: 23 May 2013 09:55 To: 'Martin Carr'; 'Jim Storey'
35
Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, This needs to be sorted soon, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 May 2013 10:13 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, What is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 April 2013 10:47 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, I think this sump pump needs some immediate attention. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 April 2013 11:01 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise when this job will be done, approx? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 April 2013 14:06 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, Can you advise when this oil leak will be sorted? Martin.
36
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job Oakland Lift Marc, There are just a few minor issue outstanding with regard to this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 18 May 2012 10:27 To: 'Martin Carr'; 'Jim Storey' Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you advise on progress? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner'; [email protected] Subject: RE: HS Job Oakland Lift
37
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 11 November 2011 19:27 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift Jim, We have just received the latest report and this item is still outstanding, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 05 October 2011 17:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Charles Warriner' Subject: RE: HS Job Oakland Lift Jim, Is this something you are going to sort or shall I get the lift engineers to fix it? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job Oakland Lift
38
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job Oakland Lift
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job Oakland Lift Jim, Work is required on the Oakland lift. For the full report see http://hs.carrs‐silver.co.uk/oaklandlift.pdf Martin.
39
Martin Carr
From: Martin Carr [[email protected]]Sent: 06 December 2013 09:49To: 'Martin Carr'; 'Marc Horner'Subject: RE: Casting Soleniod Valve
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 November 2013 09:59 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Marc, Can you update me on the status of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2013 10:03 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2013 09:52 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 August 2013 10:55 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve 03/09/2013 19:10 Deferred due to Marc holiday
40
Marc, I am still awaiting an update on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 July 2013 09:45 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Date? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 June 2013 09:32 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Casting Soleniod Valve Marc, I am still awaiting a date for this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 June 2013 10:33 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Casting Soleniod Valve Can you advise of an approx completion date? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:57 To: 'Martin Carr' Subject: RE: Casting Soleniod Valve Its on the list
From: Martin Carr [mailto:[email protected]] Sent: 23 May 2013 09:53 To: 'Marc Horner'; 'Security Dept'; 'Martin Carr' Subject: RE: Casting Soleniod Valve Marc, I am still awaiting an update on this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 May 2013 15:35 To: 'Marc Horner'; 'Security Dept' Cc: 'Martin Carr' Subject: Casting Soleniod Valve
41
Marc, This valve is not working, can you advise when it will be fixed? Martin.
42
Martin Carr
From: Martin Carr [[email protected]]Sent: 05 December 2013 09:08To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: Rolling Mill Chopper Guarding
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Has this job now been done? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 22 November 2013 15:53 To: 'Martin Carr' Subject: RE: Rolling Mill Chopper Guarding Martin Mesh material to cover the machine has been ordered, this is a closer weave that will be wrapped over the existing guarding Marc
From: Martin Carr [mailto:[email protected]] Sent: 11 November 2013 09:09 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Rolling Mill Chopper Guarding Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 October 2013 09:08 To: 'Martin Carr' Subject: RE: Rolling Mill Chopper Guarding See below
From: Martin Carr [mailto:[email protected]] Sent: 17 October 2013 09:11 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Rolling Mill Chopper Guarding I am still awaiting an update on this job, can you advise?
43
Martin.
From: Marc Horner [mailto:[email protected]] Sent: 03 October 2013 10:50 To: 'Martin Carr' Subject: RE: Rolling Mill Chopper Guarding Martin, This is on the list for Maint. as a fill in job, guarding has been like this for 20+ years and you would have to deliberately attempt to put fingers through the guards Marc
From: Martin Carr [mailto:[email protected]] Sent: 26 September 2013 11:32 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 August 2013 09:13 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding 03/09/2013 09:10 Marc on holiday, job deferred Marc, Can you advise on this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 July 2013 11:28 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Rolling Mill Chopper Guarding Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 08:45 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Rolling Mill Chopper Guarding Marc,
44
There needs to be some extra sheeting added over the current mesh guarding on the machine by the fork truck. While there is guarding there at the moment, it is possible to push your finger through it and contact with the belts behind. Martin.
45
Martin Carr
From: Martin Carr [[email protected]]Sent: 05 December 2013 09:08To: 'Martin Carr'; 'Marc Horner'Subject: RE: Silverware Good Lift
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 November 2013 09:09 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 October 2013 09:10 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, I am still awaiting an update on this job, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 September 2013 10:30 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 August 2013 09:57 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc,
46
Can you let me have an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:12 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Marc, What has become of this contract? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 23:44 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Silverware Good Lift Can you advise how you got on with this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 12:51 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Silverware Good Lift Marc, How is this going in terms of sub‐contracting it? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:57 To: 'Martin Carr' Subject: RE: Silverware Good Lift I think that as its non‐urgent and we constantly keep it to the bottom of the list I will try and sub‐contract the maintenance of this
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2013 13:39 To: 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you advise on this job? Martin.
47
From: Martin Carr [mailto:[email protected]] Sent: 12 May 2013 17:55 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift This job remains outstanding on the latest report, can you advise on progress? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 May 2013 07:52 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 April 2013 08:53 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Marc, Can you advise when this job will be complete? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 November 2012 18:33 To: 'Jim Storey'; [email protected] Cc: 'Martin Carr' Subject: RE: Silverware Good Lift This is still showing outstanding work as per the previous report, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; 'Jim Storey'; [email protected] Subject: RE: Silverware Good Lift Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 May 2012 10:22 To: 'Jim Storey'; [email protected] Cc: 'Martin Carr' Subject: Silverware Good Lift Work is required on this lift.
48
http://hs.carrs‐silver.co.uk/silvergoodslift.pdf
49
Martin Carr
From: Marc Horner [[email protected]]Sent: 04 December 2013 16:02To: 'Martin Carr'Subject: RE: HS 473 Woodwork LEV UPDATED
Follow Up Flag: Follow upFlag Status: Flagged
Martin, On the points Below a/ Wadkin Table Saw No 8 Not sure what can be done with this machine – I will have a better look once the others are complete March 2014 b/ De‐Nibbing Shop ‐ Drill Driven Buffing Wheel I need to make a specific Guard & housing – This will be made from parts of LEV 41 (which is in the process of being modified)– End Jan 2014 c/ Cabinet Makers Shop ‐ Bench extraction This is a new point that was added at the request of the joiners – There was no extraction where they sanded the boxes, we have fitted extraction and now have issues, d/ Routers 4 and 5 Again, Not sure what can be done with this machine – possibly see what tool guard extraction is available I will have a better look once the others are complete March 2014 e/ Cooksley Cross Cut Saw No 1 We have fitted an additional extraction point but this is still unsatisfactory – We need to modify the entire Blade Guard – End Jan 2014 Marc
From: Martin Carr [mailto:[email protected]] Sent: 04 December 2013 12:40 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 November 2013 09:10 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 October 2013 09:36 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise what is happening in regard to the update to this report?
50
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 October 2013 16:41 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED The report has been updated from the insurance company.
From: Marc Horner [mailto:[email protected]] Sent: 24 September 2013 17:18 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Martin, All the extras were fitted, but inspector has been today, there needs to be further improvement for dust capture on 5 items (see report when it arrives) Noted that the last mods are an improvement to what was existing – but more is needed Marc
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:39 To: 'Marc Horner'; 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 07 August 2013 09:44 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED 02/09/2013 09:05 Marc on holiday at present
Yes, Its on site, will be fitted when we have a spare hour Marc
From: Martin Carr [mailto:[email protected]] Sent: 07 August 2013 09:13 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Has this been delivered as yet? Martin.
51
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 14:12 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Its on the Order with the other Fabricated Items, Got a better price with it not being a rush job, Will be delivered in the next 3 or 4 weeks Marc
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:49 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, What happened? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:21 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED What has become on this order? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 June 2013 10:49 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise when this job will be complete? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 24 May 2013 18:46 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED Need to order a new capture hood for router 4. Will place PO next week
From: Martin Carr [mailto:[email protected]] Sent: 24 May 2013 10:06 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED
52
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 May 2013 15:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS 473 Woodwork LEV UPDATED Marc, Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:09 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV UPDATED
From: Marc Horner [mailto:[email protected]] Sent: 16 November 2012 14:42 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV The bottom flexible duct to the planer is damaged and currently disconnected from the system. The duct should be repaired and the capture hood refitted. Reconnected Capture hoods are missing at Routers 4 and 5 and should be fitted in order to improve the effective capture. Quoted – On Order The Wadkin Cross Cut Saw, No 10, has no extraction fitted to the saw hood. Reconnected
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected]; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:45 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected]; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
53
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 21 October 2011 14:48 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV From: Jim Storey [mailto:[email protected]] Sent: 21 October 2011 13:49 To: 'Martin Carr' Subject: RE: HS 473 Woodwork LEV Done awaiting retest
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Can you advise on progress?
From: Martin Carr [mailto:[email protected]] Sent: 05 October 2011 13:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'; [email protected] Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV Please note that this has been re‐inspected, where additional items have now been taken out of use. Jim, Can you arrange for these to be fixed asap. Steve, Please ensure that this equipment is not used until it has been repaired. Anyone doing so will be subject to company disciplinary procedure. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS 473 Woodwork LEV
54
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Cc: 'Richard Carr' Subject: HS 473 Woodwork LEV Jim, Can you advise on progress on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'; 'Toolroom' Subject: HS 473 Woodwork LEV Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson'
55
Cc: 'Jack Wood' Subject: HS 473
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:30 To: 'Martin Carr'; 'Jim Storey'; 'Steve Donson' Subject: HS 473 Can you advise what is happening with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 October 2010 15:54 To: 'Jim Storey'; 'Steve Donson' Cc: 'Martin Carr' Subject: HS 473 Please note that the woodworking general extractor is a poor state. Housekeeping is a bad problem (pipes blocked etc). There are also a few dampers that have been removed and not replaced. Finally a few items do require replacement. For full details see this link http://hs.carrs‐silver.co.uk/woodlev.pdf Please advise. Martin 04 Oct 2010 Job issued to Jim Storey & Steve Donson 18 Oct 2010 Requested update from Jim Storey & Steve Donson 15 Nov 2010 Requested update from Jim Storey
56
Martin Carr
From: Martin Carr [[email protected]]Sent: 04 December 2013 12:41To: 'Martin Carr'; 'Marc Horner'Subject: RE: Drain Covers & Potholes
Follow Up Flag: Follow upFlag Status: Flagged
From: Marc Horner [mailto:[email protected]] Sent: 04 December 2013 14:07 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes Builder is onsite next week starting the new handle area, he has booked in 5 days – He will fit in what he can if there is any spare time (we have already asked for an extra wall) And will be quoting on all the odd jobs Wall in Despatch Drains Flagstones on path Marc Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 November 2013 09:10 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers & Potholes Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 October 2013 09:35 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Drain Covers & Potholes Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 25 September 2013 11:29
57
To: 'Martin Carr' Subject: RE: Drain Covers & Potholes Drainage channels complete, need quotes for groundwork’s Marc
From: Martin Carr [mailto:[email protected]] Sent: 25 September 2013 10:30 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers & Potholes Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 06 August 2013 09:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers & Potholes Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2013 14:08 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Drain Covers & Potholes Yes it is falling in. Martin.
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 13:14 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes 15 L/M of heavy duty drain cover £447.00 + vat Want em? Marc
From: Marc Horner [mailto:[email protected]] Sent: 05 July 2013 11:29 To: 'Martin Carr' Subject: RE: Drain Covers & Potholes Been in today to quote on the drain channel covers, Will have price and leadtime early next week
58
From: Martin Carr [mailto:[email protected]] Sent: 04 July 2013 09:48 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 June 2013 11:19 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes I am still awaiting at ETTC for this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 May 2013 09:44 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Marc, Can you advise what has become of this price? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 May 2013 09:51 To: 'Marc Horner'; 'Jason Bee' Cc: 'Martin Carr' Subject: RE: Drain Covers & Potholes Marc, Can you advise how these quotes are progressing? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 13:57 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers & Potholes Martin, the manhole has started to collapse at the top in the yard, Builder has been in and measured up to quote – waiting for price, I will contact a second for another quote All the heavy duty covers we have were custom made @ DSS – I have asked them to re‐quote to replace the remaining pressed steel ones Marc
59
From: Martin Carr [mailto:[email protected]] Sent: 10 May 2013 10:07 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, Can you advise how this job is going and when it will be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 May 2013 09:20 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, How is the drain brick repair work looking? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 April 2013 12:00 To: 'Martin Carr'; 'Marc Horner'; 'Jason Bee' Subject: RE: Drain Covers Marc, Can you advise when this job will be done, approx? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 April 2013 09:22 To: 'Marc Horner'; 'Jason Bee' Cc: 'Martin Carr' Subject: RE: Drain Covers Marc, Can you let me have an update on this project? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 09 April 2013 15:11 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Now the snows gone I’ll measure up and see if I can get standards, if not it will be made to measure Marc
From: Martin Carr [mailto:[email protected]] Sent: 09 April 2013 13:19 To: 'Martin Carr'; 'Jason Bee'
60
Cc: 'Marc Horner' Subject: RE: Drain Covers Marc, Can you advise what is happening with regard to this project? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 March 2013 09:30 To: 'Martin Carr'; 'Jason Bee' Cc: 'Marc Horner' Subject: RE: Drain Covers Marc, I am still awaiting an update on this, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 March 2013 10:03 To: 'Martin Carr'; 'Jason Bee' Cc: 'Marc Horner' Subject: RE: Drain Covers Can you advise when some action will be done with regard to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 March 2013 15:31 To: 'Jason Bee' Cc: 'Martin Carr'; 'Marc Horner' Subject: RE: Drain Covers I have now had a look at the drain covers and would also advise that come checker board is cut down to achieve what is needed.. Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 March 2013 11:30 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Can you advise what has become of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 26 February 2013 09:41 To: 'Martin Carr'; 'Jason Bee' Subject: RE: Drain Covers Can you advise on the progress of this job?
61
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 February 2013 09:40 To: 'Jason Bee' Subject: RE: Drain Covers Can you advise what has become of this? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 February 2013 16:56 To: 'Jason Bee' Subject: Drain Covers Jason, Can you investigate the cost of the “heavy duty” storm covers for the centre drains as used by the ammonia area.. Outside the gate there are a few, which are good, but then it goes to aluminium ones which are not strong enough.. So looking to replace those? Martin.
62
Martin Carr
From: Marc Horner [[email protected]]Sent: 03 December 2013 17:39To: 'Martin Carr'Subject: RE: Press 8
Follow Up Flag: Follow upFlag Status: Flagged
Martin, There are no interlocks on the , ( and never have been) the door requires tools (ie hex key) to open. Low priority and down as a fill in job, ‐ Summer 2014 Marc
From: Martin Carr [mailto:[email protected]] Sent: 03 December 2013 11:30 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 November 2013 09:28 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 October 2013 08:32 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 September 2013 08:40 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8
63
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 August 2013 09:13 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 02/09/2013 09:05 Marc on holiday at present Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 July 2013 11:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 8 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 June 2013 16:45 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 8 Marc, Work is required to this press. http://hs.carrs‐silver.co.uk/press8.pdf Martin.
64
Martin Carr
From: Martin Carr [[email protected]]Sent: 02 December 2013 08:53To: 'Martin Carr'; 'Marc Horner'Cc: 'Charles Warriner'Subject: RE: Press 15864
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 October 2013 09:32 To: 'Marc Horner' Cc: 'Charles Warriner'; 'Martin Carr' Subject: RE: Press 15864 06/11/2013 07:07 Not chased due Marc holiday Marc, Can you advise on the progress of this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:46 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Martin, The Guards “thumbscrews” are tightened with a key, and cannot be untightened by hand The interlocks etc are behind the heater requests you keep prioritising for the electricians Marc
From: Martin Carr [mailto:[email protected]] Sent: 20 September 2013 12:37 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
65
From: Martin Carr [mailto:[email protected]] Sent: 27 August 2013 10:50 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 August 2013 09:21 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, I need an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 June 2013 10:58 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:04 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Marc, Can you advise on progress of this job?
66
Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:25 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; [email protected] Cc: 'Charles Warriner' Subject: RE: Press 15864 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 23 April 2012 16:48 To: [email protected] Cc: 'Charles Warriner'; 'Martin Carr' Subject: Press 15864 Please note that this press cannot be returned to service until the work requested has been carried out. http://hs.carrs‐silver.co.uk/press15865.pdf Martin.
67
Martin Carr
From: Marc Horner [[email protected]]Sent: 29 November 2013 13:57To: 'Martin Carr'Subject: RE: Press 3b
Follow Up Flag: Follow upFlag Status: Flagged
Martin As per previous There have been other priorities for Maint. recently ‐ This will be done as a complete project with all the presses. At the moment there are no immediate risks, The presses have been used in this condition for 10+ years. This is more a case of bringing the press up to modern standards It’s a significant amount of work and I will aim to have them all competed April Marc
From: Martin Carr [mailto:[email protected]] Sent: 28 November 2013 10:54 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Press 3b Now that Dave is back can you advise how these are progressing? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 23 October 2013 14:31 To: 'Martin Carr' Subject: RE: Press 3b Martin, Again ‐ These are for Dave to look at when he is back from Sickness, he was doing these prior to the request for Heating Control All presses are to be put to the same “logic” ie all to have 2 handed operation enabled, all to have guard master switches, etc Marc
From: Martin Carr [mailto:[email protected]] Sent: 04 October 2013 09:24 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3b Marc, Can you advise on this job? Martin.
68
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:37 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3b 10/09/2013 09:43 Deferred due Marc holiday Marc, Can you advise when this job will be done? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3b Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:32 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 3b Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/press3b.pdf Martin.
69
Martin Carr
From: Marc Horner [[email protected]]Sent: 29 November 2013 13:45To: 'Martin Carr'Subject: RE: Press 2995
Follow Up Flag: Follow upFlag Status: Flagged
Martin, There have been other priorities for Maint. recently ‐ This will be done as a complete project with all the presses. At the moment there are no immediate risks, The presses have been used in this condition for 10+ years. This is more a case of bringing the press up to modern standards It’s a significant amount of work and I will aim to have them all competed April Marc
From: Martin Carr [mailto:[email protected]] Sent: 28 November 2013 10:53 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Press 2995 Marc, How is this progressing now that Dave is back? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 23 October 2013 14:26 To: 'Martin Carr' Subject: RE: Press 2995 Martin, Guard Master Switches required, These are for Dave to look at when he is back from Sickness, he was doing these prior to the request for Heating Control & will tidy up the other loose ends on this press once at the same time Rear Guard fixings replaced, Marc
From: Martin Carr [mailto:[email protected]] Sent: 04 October 2013 09:24 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 2995 Marc,
70
Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 2995 10/09/2013 09:43 Deferred due Marc holiday Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 11 July 2013 08:24 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 2995 Marc, Can you advise when this is scheduled? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:24 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 2995 Marc, Work is required on this press as per; http://hs.carrs‐silver.co.uk/press2995.pdf Martin.
71
Martin Carr
From: Marc Horner [[email protected]]Sent: 28 November 2013 09:04To: 'Martin Carr'Subject: RE: HS Job LPK11051 Lifting Appliance
Follow Up Flag: Follow upFlag Status: Flagged
Martin There is no load rating marked anywhere on the equipment & I cannot find any technical data online re the piston itself? The Piston Ø63mm RodØ20mm and working pressure of 10bar gives a lifting value of approx. 285kg I will speak with you re this next time your down to discuss how we stand to self‐certify the cylinder? Marc
From: Martin Carr [mailto:[email protected]] Sent: 27 November 2013 11:01 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 04 November 2013 09:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 October 2013 09:18 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you update me on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 20 September 2013 15:36
72
To: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance Martin The load lable may be under a fitting plate, I will have it stripped and checked Note – the equipment hasn’t been used for 12 months and never for more than 40kg ‐ I will check if we can remove it Marc
From: Martin Carr [mailto:[email protected]] Sent: 19 September 2013 09:46 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 August 2013 09:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 July 2013 09:29 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 July 2013 10:52 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me have an update on this job? Martin.
73
From: Martin Carr [mailto:[email protected]] Sent: 06 June 2013 11:29 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me know an estimated date when this job will be complete? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 31 May 2013 15:57 To: 'Martin Carr' Subject: RE: HS Job LPK11051 Lifting Appliance To be completed next week
From: Martin Carr [mailto:[email protected]] Sent: 30 May 2013 09:23 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me know on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 May 2013 11:15 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 May 2013 07:56 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Marc, I have not had an update on this job for a while, can you let me have an approx date when it will be sorted? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:24 To: 'Martin Carr'; 'Jim Storey'
74
Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:33 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
75
Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job LPK11051 Lifting Appliance
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job LPK11051 Lifting Appliance Jim, Work is required on this item. Full details of the work can be found by going to http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
76
Martin Carr
From: Marc Horner [[email protected]]Sent: 27 November 2013 09:05To: 'Martin Carr'Cc: 'Charles Warriner'Subject: RE: LEV 41
Follow Up Flag: Follow upFlag Status: Flagged
New Capture Hoods have been delivered, I have also ordered a new(2nd hand) extraction unit – which is being reconditioned by Rileys Expected delivery w/c 16th Dec We will complete all this at the same time Marc
From: Martin Carr [mailto:[email protected]] Sent: 26 November 2013 09:53 To: 'Martin Carr'; 'Marc Horner' Cc: 'Charles Warriner' Subject: RE: LEV 41 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 November 2013 09:36 To: 'Martin Carr'; 'Marc Horner' Cc: 'Charles Warriner' Subject: RE: LEV 41 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 08 October 2013 16:41 To: 'Marc Horner' Cc: 'Charles Warriner'; 'Martin Carr' Subject: LEV 41 Importance: High Please be advised that this LEV must not be used until the actions on the report below are done. Martin. http://hs.carrs‐silver.co.uk/lev41.pdf
77
Martin Carr
From: Marc Horner [[email protected]]Sent: 22 November 2013 15:45To: 'Martin Carr'Subject: RE: HS Job 457 - Press Shop press 2888
Follow Up Flag: Follow upFlag Status: Flagged
Not in use for production This is quite a large project of rectifying all presses to one “logic” ie all presses have the same functions enabled so all operators have a clear understanding of each press function Aim for June for all presses to have correct operation etc Marc
From: Martin Carr [mailto:[email protected]] Sent: 21 November 2013 11:00 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 October 2013 08:47 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: HS Job 457 - Press Shop press 2888 Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 23 October 2013 14:47 To: 'Martin Carr' Subject: RE: HS Job 457 - Press Shop press 2888 Martin, Press is currently not in use for production, We are interlocking the guards etc Again – This is what Dave was doing these prior to the request for Heating Control & sick leave Marc
From: Martin Carr [mailto:[email protected]] Sent: 07 October 2013 09:42
78
To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 August 2013 11:01 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 12/09/2013 08:07 Job deferred due Marc holiday Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 17 July 2013 09:43 To: 'Martin Carr'; 'Marc Horner' Subject: RE: HS Job 457 - Press Shop press 2888 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 June 2013 09:08 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 Marc, I am awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:25 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:01 To: 'Martin Carr'; 'Jim Storey'
79
Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job 457 - Press Shop press 2888 This job remains outstanding on the latest inspection report, please advise?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 457 - Press Shop press2888.pdf Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:46 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job 457 - Press Shop press2888.pdf
80
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf
From: Martin Carr [mailto:[email protected]] Sent: 16 June 2011 15:32 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop press2888.pdf Jim, This job remains outstanding on the latest report. Can you advise when this will be completed? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 April 2011 14:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop Jim, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 March 2011 15:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job 457 - Press Shop Jim, Can you advise on progress on this job? Martin.
81
From: Martin Carr [mailto:[email protected]] Sent: 27 January 2011 12:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Subject: HS Job 457 - Press Shop Can you please advise on the status of this job?
From: Martin Carr [mailto:[email protected]] Sent: 15 November 2010 16:20 To: 'Martin Carr'; 'Jim Storey' Cc: 'Jack Wood' Subject: HS Job 457 - Press Shop
From: Martin Carr [mailto:[email protected]] Sent: 18 October 2010 15:38 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2010 16:12 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop Please advise
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2010 12:18 To: 'Jim Storey' Cc: [email protected]; 'Jack Wood' Subject: HS Job 457 - Press Shop The following HS job is still outstanding. Can you please let me have an update on progress? Martin.
457 http://hs.carrs‐silver.co.uk/press2888.pdf 16 June 2010 Work required 13 August 2010 Requested update from Jim Storey 27 Sept 2010 Requested update from Jim Storey on this job 18 Oct 2010 Requested update from Jim Storey 15 Nov 2010 Requested update from Jim Storey
82
Martin Carr
From: Marc Horner [[email protected]]Sent: 22 November 2013 15:39To: 'Martin Carr'Subject: RE: Manual Truck FT1119
Follow Up Flag: Follow upFlag Status: Flagged
Note, this replaces “RE: Brit 4259” It is on the list for maintenance as low Priority fill in ‐ The Brakes are not used on this trolley Marc
From: Martin Carr [mailto:[email protected]] Sent: 21 November 2013 15:44 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Manual Truck FT1119 Marc, Work is required on this refer.. http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
83
Martin Carr
From: Martin Carr [[email protected]]Sent: 22 November 2013 13:30To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Subject: RE: Press 16412
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 31 October 2013 09:08 To: 'Marc Horner'; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise how this job is progessing? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 23 October 2013 15:47 To: 'Martin Carr'; 'Jim Storey' Subject: RE: Press 16412 Martin, Again – With all the rest of the press work this is for Dave to look at when he is back from Sickness, Interlock to be fitted to rear guard Marc
From: Martin Carr [mailto:[email protected]] Sent: 08 October 2013 11:53 To: 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 16 September 2013 11:16 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412
84
Martin, Operators reminded about setting cards Other jobs are pending Marc
From: Martin Carr [mailto:[email protected]] Sent: 16 September 2013 09:32 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise how this job is progressing? Martin. t: +44 114 263 3203 m: +44 7973 561 502 Skype: martin.carr.woodlands (note always appears off‐line, just call it) Diary Availability: Google Calandar
From: Martin Carr [mailto:[email protected]] Sent: 20 August 2013 11:15 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, I am still awaiting news on this job, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 July 2013 09:11 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 26 June 2013 09:09 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Marc, Can you advise on this job? Martin.
85
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 16412 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2012 09:59 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Press 16412 Work is required on this press. Refer http://hs.carrs‐silver.co.uk/press16412.pdf
86
Martin Carr
From: Martin Carr [[email protected]]Sent: 21 November 2013 10:59To: 'Martin Carr'; [email protected]; 'Jim Storey'Subject: RE: Press 17200
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 October 2013 08:47 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 17200 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 October 2013 10:51 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 17200 Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2013 08:57 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 09/09/2013 09:14 Deferred due Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 July 2013 11:19 To: 'Martin Carr'; [email protected]; 'Jim Storey'
87
Cc: [email protected] Subject: RE: Press 17200 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 21 June 2013 09:34 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, I have not had an update on this job, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 December 2012 19:23 To: [email protected]; 'Jim Storey' Cc: [email protected] Subject: Press 17200 Please note that work is required on this press. See http://hs.carrs‐silver.co.uk/press17200.pdf for details. Martin.
88
Martin Carr
From: Martin Carr [[email protected]]Sent: 19 November 2013 10:18To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey'Subject: RE: Toolroom Grinding LEV
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 October 2013 07:19 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 09 October 2013 09:33 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 18 September 2013 09:43 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 August 2013 10:39 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc,
89
Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 30 July 2013 09:16 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, Still waiting?? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 June 2013 09:53 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Marc, I am still awaiting an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:22 To: 'Martin Carr'; 'Marc Horner'; 'Jim Storey' Subject: RE: Toolroom Grinding LEV Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 October 2012 18:53 To: 'Marc Horner'; 'Jim Storey' Cc: 'Martin Carr' Subject: Toolroom Grinding LEV Work is required to this item; http://hs.carrs‐silver.co.uk/toolroomgrindinglev.pdf Martin.
90
Martin Carr
From: Martin Carr [[email protected]]Sent: 19 November 2013 10:18To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 1b
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 29 October 2013 07:18 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 October 2013 09:42 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 14 August 2013 09:36 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b 11/09/2013 09:17 Deferred due Marc holiday Marc, Can you advise when this job will be done? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 1b Marc,
91
Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:35 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 1b Marc, Work is required to this press; http://hs.carrs‐silver.co.uk/press1b.pdf Martin.
92
Martin Carr
From: Martin Carr [[email protected]]Sent: 18 November 2013 09:20To: 'Marc Horner'Cc: 'Martin Carr'Subject: RE: Press 9
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 23 October 2013 14:35 To: 'Martin Carr' Subject: RE: Press 9 Martin, Job on Maint list, (the guard closing lever has never been shrouded, and only appeared on the report once all other issues were cleared) Will be completed as we have time Marc
From: Martin Carr [mailto:[email protected]] Sent: 07 October 2013 09:42 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 August 2013 11:02 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 12/09/2013 08:07 Job deferred due Marc holiday Marc, I am still awaiting an update on this job? Martin.
93
From: Martin Carr [mailto:[email protected]] Sent: 17 July 2013 09:42 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 Marc, Can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 24 June 2013 09:08 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 9 Marc, Can you update me on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:29 To: 'Marc Horner' Cc: 'Martin Carr' Subject: RE: Press 9 Can you let me have an update on this job? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 27 July 2012 15:06 To: 'Martin Carr' Subject: RE: Press 9 Previous issue complete, New comments from last inspection, added to maintenance list
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Charles Warriner'; [email protected] Subject: RE: Press 9 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 30 March 2012 18:58 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner'; [email protected] Cc: 'Richard Carr' Subject: RE: Press 9 From: Marc Horner [mailto:[email protected]] Sent: 30 March 2012 15:39 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner'
94
Cc: 'Richard Carr' Subject: RE: Press 9 Martin, This is an operator training issue, the missing fixing is a capscrew ‐ 2 of which are removed to access the press and only 1 is replaced.. I will speak to Charles/Tony Smith re this issue
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:42 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner'; [email protected] Cc: 'Richard Carr' Subject: RE: Press 9
From: Martin Carr [mailto:[email protected]] Sent: 13 January 2012 07:47 To: 'Martin Carr'; 'Lee Waters'; 'Charles Warriner' Cc: 'Richard Carr' Subject: RE: Press 9 Tony, I am still awaiting an update on this job, please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 December 2011 17:06 To: 'Lee Waters'; 'Charles Warriner' Cc: 'Martin Carr'; 'Richard Carr' Subject: Press 9 Tony, Can you comment on these guarding matters? http://hs.carrs‐silver.co.uk/press9.pdf Martin.
95
Martin Carr
From: Martin Carr [[email protected]]Sent: 18 November 2013 09:20To: 'Martin Carr'; 'Jim Storey'Cc: [email protected]: RE: HS Job PT20
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 October 2013 10:15 To: 'Jim Storey' Cc: [email protected]; 'Martin Carr' Subject: RE: HS Job PT20 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 03 October 2013 09:32 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 August 2013 09:31 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 13/09/2013 15:55 Deferred due Marc holiday Marc, Can you advise on this job? Martin.
96
From: Martin Carr [mailto:[email protected]] Sent: 18 July 2013 09:47 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Marc, Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 25 June 2013 10:12 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Marc, I still need an update for this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:24 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:02 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 01 June 2012 13:39 To: 'Martin Carr'; 'Jim Storey' Cc: [email protected] Subject: RE: HS Job PT20 Can you let me have an update on this job?
From: Martin Carr [mailto:[email protected]] Sent: 03 April 2012 16:43 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom'
97
Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job PT20 Can you advise how this is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 March 2012 12:44 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; [email protected] Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 11 January 2012 16:20 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 17 November 2011 15:34 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20 A quote has been requested for this job.
From: Martin Carr [mailto:[email protected]] Sent: 20 October 2011 16:24 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 15 September 2011 17:23 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: RE: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2011 14:42 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job PT20
98
From: Martin Carr [mailto:[email protected]] Sent: 05 July 2011 14:11 To: 'Martin Carr'; 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr' Subject: HS Job PT20
From: Martin Carr [mailto:[email protected]] Sent: 28 April 2011 15:34 To: 'Jim Storey'; 'Toolroom' Cc: 'Richard Carr'; 'Martin Carr' Subject: HS Job PT20 Jim, Work is required on this item. Full details of the work can be found by going to http://hs.carrs‐silver.co.uk/liftingu1.pdf Martin.
99
Martin Carr
From: Marc Horner [[email protected]]Sent: 15 November 2013 10:07To: 'Martin Carr'; 'Jim Storey'Subject: RE: Press 15865
Follow Up Flag: Follow upFlag Status: Flagged
Had a more through look at this We have ordered the electrical schematics from the manufacturer – once these are here we can see how to cut into the safety circuit Marc
From: Martin Carr [mailto:[email protected]] Sent: 14 November 2013 11:23 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 October 2013 08:49 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2013 08:56 To: 'Marc Horner'; '[email protected]'; 'Jim Storey' Subject: RE: Press 15865 06/09/2013 09:14 Deferred due to Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 July 2013 09:14 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc,
100
Please advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 20 June 2013 08:44 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 10 June 2013 11:36 To: 'Martin Carr'; 'Marc Horner'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, I am still awaiting a reply on this matter? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 28 May 2013 09:50 To: 'Marc Horner'; '[email protected]'; 'Jim Storey' Subject: RE: Press 15865 Can you advise on an approx date when this will be done? Martin.
From: Marc Horner [mailto:[email protected]] Sent: 10 May 2013 14:00 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Martin due to breakdowns on other machinery we have not looked at this yet Marc
From: Martin Carr [mailto:[email protected]] Sent: 10 May 2013 10:06 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you please advise how this job is going? Martin.
101
From: Martin Carr [mailto:[email protected]] Sent: 29 April 2013 10:45 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Marc, Can you advise how this job is progressing? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 November 2012 14:23 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 27 September 2012 16:04 To: 'Martin Carr'; [email protected]; 'Jim Storey' Subject: RE: Press 15865 Can you let me have an update to this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 May 2012 10:01 To: [email protected]; 'Jim Storey' Cc: 'Martin Carr' Subject: Press 15865 Work is required on this press. Refer http://hs.carrs‐silver.co.uk/press15865.pdf
102
Martin Carr
From: Martin Carr [[email protected]]Sent: 14 November 2013 11:23To: 'Martin Carr'; 'Marc Horner'Subject: RE: Press 3042
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 23 October 2013 17:49 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042 Marc, Can you advise on progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 02 October 2013 10:51 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042 Marc, Can you advise on the progress of this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 13 August 2013 09:35 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042 09/09/2013 09:14 Deferred due Marc holiday Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 12 July 2013 11:48 To: 'Martin Carr'; 'Marc Horner' Subject: RE: Press 3042
103
Marc, Can you advise on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 19 June 2013 15:50 To: 'Marc Horner' Cc: 'Martin Carr' Subject: Press 3042 Marc, Work is required on this press; http://hs.carrs‐silver.co.uk/pres3042.pdf Martin.
104
Martin Carr
From: Martin Carr [[email protected]]Sent: 14 November 2013 11:23To: 'Martin Carr'; [email protected]; 'Jim Storey'Cc: [email protected]: RE: Press 17200
Follow Up Flag: Follow upFlag Status: Flagged
Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 22 October 2013 08:50 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, Can you let me have an update on this job? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 15 August 2013 08:57 To: 'Martin Carr'; '[email protected]'; 'Jim Storey' Cc: '[email protected]' Subject: RE: Press 17200 06/09/2013 09:14 Deferred due to Marc holiday Marc, Still waiting? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 16 July 2013 11:19 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, Can you advise? Martin.
105
From: Martin Carr [mailto:[email protected]] Sent: 21 June 2013 09:34 To: 'Martin Carr'; [email protected]; 'Jim Storey' Cc: [email protected] Subject: RE: Press 17200 Marc, I have not had an update on this job, can you advise? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 December 2012 19:23 To: [email protected]; 'Jim Storey' Cc: [email protected] Subject: Press 17200 Please note that work is required on this press. See http://hs.carrs‐silver.co.uk/press17200.pdf for details. Martin.
106
Martin Carr
From: Martin Carr [[email protected]]Sent: 13 November 2013 15:22To: 'Marc Horner'Cc: Mick Rothenburg; 'Martin Carr'; Forward StockSubject: Missing FloorAttachments: 1384353790234.jpg
Follow Up Flag: Follow upFlag Status: Flagged
From: Marc Horner [mailto:[email protected]] Sent: 22 November 2013 15:08 To: 'Martin Carr' Cc: 'Mick Rothenburg'; 'Forward Stock'; 'Charles Warriner'; Steve Fish Subject: RE: Missing Floor Martin, All items in this area have been moved away from the edge, and Maint personnel who have reason to be up there notified that they cannot move items whilst people may be below This will be done March, ( I will ask Steve Fish to assist when he has cleared customer orders etc) 22/11/2013 13:31 Requested update from Marc Marc, Can you arrange for the missing floor to be covered so that items cannot call down? Martin.
107
Martin Carr
From: Martin Carr [[email protected]]Sent: 31 October 2013 09:06To: 'Martin Carr'; 'Marc Horner'Cc: 'Steve Fish'Subject: RE: Sptayshop LEV
Follow Up Flag: Follow upFlag Status: Flagged
Can you advise what is happening with regard to this? I am still awaiting an update? Martin.
From: Martin Carr [mailto:[email protected]] Sent: 07 October 2013 16:56 To: 'Marc Horner' Cc: Steve Fish; 'Martin Carr' Subject: Sptayshop LEV Marc, On the latest LEV report there is some indication that contaminant is escaping and has been found on the exhaust stack. What is the situation with regard to filters, which should stop this? Martin. http://hs.carrs‐silver.co.uk/sprayholbrooklev.pdf