Mark owned by the Cooling Technology Institute No… · 1688 Jinshi Road, Baoshan District Shanghai...
4
† Mark owned by the Cooling Technology Institute †
Transcript of Mark owned by the Cooling Technology Institute No… · 1688 Jinshi Road, Baoshan District Shanghai...
† Mark owned by the Cooling Technology Institute
†
EvapJet™
PerformanceAdvantages
Thermal PerformanceIncrease!
EvapJet’s unique design ensures that
every square inch of heat transfer surface
receives complete and even water
coverage, resulting in maximum thermal
performance. EvapJet nozzles increase
equipment thermal performance up to
3.5%. EVAPCO’s pressurized water
distribution system with EvapJet nozzles is
the most efficient system in the industry.
Oscillating Spray Water!
The sweeping oscillations from EvapJet’s
colliding water streams provide complete
fill pack coverage. Traditional nozzle
designs create uneven water distribution
that can result in “dry spots” or heat
transfer surfaces not covered by water,
thereby reducing thermal performance.
Even Spray Distribution!
Also, the EvapJet nozzle design
incorporates a dispersion bar at the nozzle
orifice to further ensure even water
distribution over the heat transfer surface.
EvapJet™– New HigLow Maintena
Retrofit existing EVAPCOcooling towers with an
EvapJet water distributionsystem to increase
thermal performance.
The fluidic geometry of the EvapJet nozzle breaks the fluid into twoseparate paths. Typically when the two fluids meet head on they willcreate a planar water stream however, the Evapjet nozzle is designedsuch that the streams meet at an angled approach. This design resultsin an oscillatory motion characteristic of fluidic nozzles.
EvapJet™
Maintenance Advantages
Wider Nozzle Orifice!
EvapJet’s 1” wide nozzle orifice combined
with its location on the side of the header
easily allows the largest debris to flow
through the water distribution system.
EVAPCO’s pressurized distribution system
also helps to force debris through the
nozzles thereby significantly reducing
maintenance.
66% Fewer Nozzles!
This state-of-the-art water distribution
system developed by EVAPCO engineers
results in a 66% reduction in nozzles.
Fewer nozzles and a wider nozzle orifice
reduces the possibility of clogging.
No Moving Parts!
Since there are no moving parts, the nozzles
will rarely if ever need to be replaced. Less
maintenance!
Durable Construction
The EvapJet nozzle is constructed of
precision molded ABS, giving the nozzle
superior corrosion resistance.
NEW EvapJet™ NozzlePrevious EVAPCO Nozzle
New EvapJet nozzle compared to previous EVAPCO nozzles
gh Performance, ance Nozzle.
Retrofit existing EVAPCOcooling towers with an
EvapJet water distributionsystem to reducemaintenance.
Visit EVAPCO’s Website at: http://www.evapco.com
World Headquarters/Research and Development Center
EVAPCO Facilities
Innovation, Performance, Experience
EVAPCO...SPECIALISTS IN HEAT TRANSFER PRODUCTS AND SERVICES.
EVAPCO, Inc. — World Headquarters & Research/Development Center
EVAPCO, Inc. North American HeadquartersP.O. Box 1300 / Westminster, MD 21158 USAPhone: 410-756-2600 / Fax: 410-756-6450 / E-mail: [email protected]
EVAPCO Asia/Pacific
EVAPCO Asia/Pacific HeadquartersEvapco (Shanghai) Refrigeration Equipment Co., Ltd.1688 Jinshi Road, Baoshan DistrictShanghai 200949, P.R. ChinaPhone: (86) 21-6687-7786 / Fax: (86) 21-6687-7008E-mail: [email protected]
EVAPCO Europe
EVAPCO Europe, N.V.European HeadquartersHeersterveldweg 19Industriezone, Tongeren-Oost / 3700 Tongeren, BelgiumPhone: (32) 12-395029 / Fax: (32) 12-238527 / E-mail: [email protected]
EVAPCO East5151 Allendale LaneTaneytown, MD 21787 USAPhone: 410-756-2600Fax: 410-756-6450E-mail: [email protected] Midwest1723 York RoadGreenup, IL 62428 USAPhone: 217-923-3431Fax: 217-923-3300E-mail: [email protected] West1900 West Almond AvenueMadera, CA 93637 USAPhone: 559-673-2207Fax: 559-673-2378E-mail: [email protected] Iowa925 Quality DriveLake View, IA 51450 USAPhone: 712-657-3223Fax: 712-657-3226EVAPCO IowaSales & Engineering1234 Brady BoulevardOwatonna, MN 55060 USAPhone: 507-446-8005Fax: 507-446-8239E-mail: [email protected]
Refrigeration Valves & Systems CorporationA wholly owned subsidiary of EVAPCO, Inc.1520 Crosswind Dr.Bryan, TX 77808 USAPhone: 979-778-0095Fax: 979-778-0030E-mail: [email protected] Coil Company, Inc.A wholly owned subsidiary of EVAPCO, Inc.P.O. Box 17276333 S.W. Lakeview BoulevardLake Oswego, OR 97035 USAPhone: 503-639-2137Fax: 503-639-1800E-mail: [email protected], Inc.A wholly owned subsidiary of EVAPCO, Inc.8331 Nieman RoadLenexa, KS 66214 USAPhone: 913-322-5165Fax: 913-322-5166E-mail: [email protected] Components, Inc.A wholly owned subsidiary of EVAPCO, Inc.5960 US HWY 64ERamseur, NC 27316Phone: 336-824-2102Fax: 336-824-2190E-mail: [email protected]
EVAPCO Europe, S.r.l.Via Ciro Menotti 101-20017 Passirana di RhoMilan, ItalyPhone: (39) 02-939-9041Fax: (39) 02-935-00840E-mail: [email protected]
EVAPCO Europe, S.r.l.Via Dosso 223020 Piateda Sondrio, Italy
EVAPCO Europe, GmbHBovert 22D-40670 Meersbusch, GermanyPhone: (49) 2159-69560Fax: (49) 2159-695611E-mail: [email protected]
EVAPCO North America
EVAPCO, Inc. • P.O. Box 1300 • Westminster, MD 21158 USAPHONE: 410-756-2600 • FAX: 410-756-6450 • E-MAIL: [email protected]
EVAPCO S.A. (Pty.) Ltd.A licensed manufacturer of Evapco, Inc.18 Quality RoadIsando 1600Republic of South AfricaPhone: (27) 11 392-6630Fax: (27) 11-392-6615E-mail: [email protected]
Tiba Engineering Industries Co.A licensed manufacturer of Evapco, Inc.92 Asma Fahmi St.ARD El-Golf-Heliopolis, Cairo, EgyptPhone: 202-290-7483/202-291-3610Fax: 202-290-0892/ 202-414-5611E-mail: [email protected]
Beijing EVAPCO Refrigeration Equipment Co., Ltd.Yan Qi Industrial Development DistrictHuai Rou County Beijing, P.R. ChinaPostal Code 101407Phone: (86) 10 6166-7238Fax: (86) 10 6166-7395E-mail: [email protected]
Evapco (Shanghai) Refrigeration Equipment Co., Ltd.1688 Jinshi Road, Baoshan DistrictShanghai 200949, P.R. ChinaPhone: (86) 21-6687-7786Fax: (86) 21-6687-7008E-mail: [email protected]
Aqua-Cool Towers (Pty.) Ltd.A licensed manufacturer of Evapco, Inc.34-42 Melbourne St.P.O. Box 436Riverstone, N.S.W. Australia 2765Phone: (61) 29 627-3322Fax: (61) 29 627-1715E-mail: [email protected]
![[CIV-6687] IVR/CC: CO-070: Call Log Reports Enhancements · 2019. 8. 16. · [CIV-6687] IVR/CC: CO-070: Call Log Reports Enhancements Created: 12/29/2017 Updated: 10/09/2018 Status:](https://static.fdocuments.us/doc/165x107/5fd0c090b6597e610f689c07/civ-6687-ivrcc-co-070-call-log-reports-2019-8-16-civ-6687-ivrcc-co-070.jpg)
