work chairs

seating price & user guide – January 28, 2019

marini overview

• Marini Chairs have been designed and tested for users weighing up to 300 lbs• Marini Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard surfaces could result

unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection

• Executive Task Chair with Synchro-Tilt shown

Fully-featured professional/executive seating with fine detailing suitable for image and performance minded professionals.

Statement of Line

High-Back – T-Arms

Fully Upholstered Back and seat

Height and Depth Adjustable Seat

2 3/8" Casters

Height and Width Adjustable Arms

Tension Control

Polished Aluminum Five Star Base

work chairs

seating price & user guide – January 28, 2019

marini dimensions & material requirements

SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq . ft] [yards] [sq . ft] [yards] [sq . ft]

High-Back 2 28 1 11 1 17

Arm

Hei

ght

from

Sea

t 7

3/4"

- 12

"

Back Width 19 1/4"

Bac

k H

eigh

t fr

om S

eat

24 3

/4"

Ove

rall

Hei

ght

45"

Seat Width 19"

Seat Depth 18"- 20"

Overall Depth 30"

Overall Width 30"

Angle between Seat and Back 96˚

Seat

Hei

ght

from

Flo

or

Stan

dard

17

3/4"

- 21

3/4

" H

igh

19"-

24"

Lo

w 1

6 1/

2"-

19"

Dimensions

For Conversion to Metric, multiply dimension by 25 .4 .

COM/COL Material Requirement

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .

Width Between Arms 17 1/2"-21 1/2"

Lumbar Apex Height 10"

WEIGHTTask Chair 51 lbs

work chairs

seating price & user guide – January 28, 2019

marini adjustment features & instructions

SEAT HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT

SEAT DEPTH ADJUSTMENT TILT TENSION ADJUSTMENT

ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT

To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place . To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place .

To adjust the angle of recline, push the lever down to unlock the back . Recline to the desired position and lift the lever up to lock in place or leave to allow backrest to recline freely .

To adjust the seat depth, lift the lever up and simultaneously lift your weight from the seat while sliding the seat forward or backward . Release lever to lock the seat in place .

Leaning back, determine if the resistance of the chair is comfortable . For less resistance, pull tension adjustment knob out and turn it counter clockwise . For greater resistance, turn the knob clockwise .

To adjust the arm height, press the button located under the armrest to raise or lower it to the desired position . Release the button to lock in place .

To adjust width of each arm, push the lever down and slide the arm to the desired position . Push the lever up to lock the arm in place .

work chairs

seating price & user guide – January 28, 2019

N M A XMarini – Synchro-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Back-tilt can be locked in three positions or left free flow• Frame and base is Aluminum• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and back .Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the back and the other fabric to the seat . The first fabric listed will apply to the back and is the grade of fabric used to price the chair . A dual upholstery upcharge applies .

DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

Height and Width-Adjustable T-Arms 1366 1420 1472 1523 1574 1627 1680 1732 1783 1965

Leather Leather Leather Leather LA LB LC LD

Height and Width-Adjustable T-Arms 1957 2054 2343 2440If Dual Upholstered (D) is specified add 193 If Polished Aluminum (C9) is specified add 63 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33

Headrest

N No Headrest

Back Style

H High Back

Arm Style

W Height and Width Adjustable T-Arms

Upholstery Style

S Single Upholstered

D Dual Upholstered

Back Upholstery Finish

Fabric

Leather

Seat Upholstery Finish

(For Dual)

Fabric

Leather

Cylinder Style

1 Standard

2 High

3 Low

Frame and Base Finish

C9 Polished Aluminum

Casters/ Glides (Optional)

A Casters, Soft

B Glides, Hard

C Glides, Soft

PRODUCT OPTIONS

SAMPLE ORDER CODE

NMAX N H W D 1 C9M315 M309

work chairs

seating price & user guide – January 28, 2019

N M A X JMarini – Synchro-Tilt Task Chair

(CAL-TB133)

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Back-tilt can be locked in three positions or left free flow• Frame and base is Aluminum• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and back .Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the back and the other fabric to the seat . The first fabric listed will apply to the back and is the grade of fabric used to price the chair . A dual upholstery upcharge applies .

DESCRIPTION PRICE

Grade 1 Grade 2 Grade 3

Height and Width-Adjustable T-Arms 1609 1661 1714If Dual Upholstered (D) is specified add 193 If Polished Aluminum (C9) is specified add 63 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33

Headrest

N No Headrest

Back Style

H High Back

Arm Style

W Height and Width-Adjustable T-Arms

Upholstery Style

S Single Upholstered

D Dual Upholstered

Back Upholstery Finish

Fabric

Seat Upholstery

Finish (For Dual)

Fabric

Cylinder Style

1 Standard

2 High

3 Low

Frame and Base Finish

C9 Polished Aluminum

Casters/Glides (Optional)

A Casters, Soft

B Glides, Hard

C Glides, Soft

PRODUCT OPTIONS

SAMPLE ORDER CODE

NMAXJ N H W D 1 C9

CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies .

M315 M309