Amicus is a streamline design with intuitive user ... · 3D T-Arms – November 2 2 amicus...
Transcript of Amicus is a streamline design with intuitive user ... · 3D T-Arms – November 2 2 amicus...
work chairs
seating price & user guide – January 28, 2019
amicus overview
Outer Back is Plastic
• Amicus Chairs have been designed and tested for users weighing up to 300 lbs• Amicus Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard surfaces could result in
unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection
• Amicus Task/Executive Chair with Synchro-Tilt is shown
Pivoting 3D Arm Cap 45˚ inwards 15˚ outwards
Amicus is a streamline design with intuitive user adjustability.
Lumbar Apex Height-Adjustment of 2 1/4"
(General Use has body fit contour lumbar support
which is not user adjustable)
Back Tilt Lock
Five Star BaseTotal Arm Width Adjustment of: 2D: T-Arms 3" 3D: T-Arms 1 1/2"
Height-Adjustment: 2D: 4" 3D: 3"
Standard Seat Height-Adjustment of 4"
Seat Depth Adjustment of 2 1/2"
Tension Adjustment
Statement of Line
2 3/8" (60mm)
Cantilever Frame – No Arms
Cantilever Frame – Integrated Arms
Four-Leg Frame – No Arms
Four-Leg Frame with Casters –
No Arms
Four-Leg Frame – Integrated Arms
Four Leg Frame with Casters –
Integrated Arms
Mid-Back – No Arms
Mid-Back – Loop Arms
Mid-Back – Fixed T-Arms
Mid-Back – 2D T-Arms
Mid-Back – 3D T-Arms
High-Back – No Arms
High-Back – Fixed T-Arms
High-Back – Loop Arms
High-Back – 2D T-Arms
High-Back – 3D T-Arms
work chairs
seating price & user guide – January 28, 2019
amicus dimensions & material requirements
SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq . ft] [yards] [sq . ft] [yards] [sq . ft]
Mid-Back 1 1/2 15 1 8 1/2 1 10High-Back 1 3/4 20 1 8 1/2 1 1/4 12
COM/COL Material Requirement
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
Seat Width Task Use 17 3/4"
Arm
Hei
ght
from
Sea
t Fi
xed
T-A
rm 8
1/2
" Lo
op A
rm 9
" 2D
Arm
7 1
/2"-
11 1
/2"
3D A
rm 7
3/4
"-10
3/4
"
Backrest Width Task/General Use 18 1/2"
Width Between ArmsFixed T-Arm 18 7/8" Loop Arm 17 3/4" 2D Arm 17 1/2" - 20 1/4" 3D Arm 16 1/4" - 19 1/4"
Lumbar Apex HeightTask 7"-11"
Seat Depth Task 15" 1/2"-18"
Seat
Hei
ght
Tas
k St
anda
rd 1
6 1/
2"-2
0 1/
2"
Tas
k Lo
w 1
5"-1
8"
Tas
k H
igh
17 3
/4"-
22 3
/4"
Angle between Seat and Back Task 97˚-113˚
Bac
k H
eigh
t fr
om S
eat
Tas
k M
id-B
ack
21"
Tas
k H
igh-
Bac
k 24
"
Ove
rall
Hei
ght
(Sta
ndar
d C
ylin
der)
Tas
k M
id-B
ack
38"-
42"
T
ask
Hig
h-B
ack
41"-
45"
Overall Width Task/General Use 30"
Overall Depth Task Use 30"
WEIGHTTask Mid Back 43 - 46 lbsTask High Back 43 - 46 lbs
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
work chairs
seating price & user guide – January 28, 2019
amicus dimensions & material requirements (continued)
SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq . ft] [yards] [sq . ft] [yards] [sq . ft]
Guest Chairs Seat only 1 8 1/2 n/a n/a n/a n/aGuest Chairs Seat and Back 1 10 1/2 n/a n/a n/a n/a
COM/COL Material Requirement
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
Seat Width 20 1/4"
Arm
Hei
ght
from
Sea
t 8"
Backrest Width 19"
Cantilever
Lumbar Apex HeightGeneral Use 9"
Seat Depth 17 1/4"
Seat
Hei
ght
Gue
st F
our-
Leg
17"
Gue
st C
anti
leve
r 18
"
Arm
Hei
ght
from
Flo
or 2
5 3/
4"
Angle between Seat and Back 97˚
Bac
k H
eigh
t fr
om S
eat
15 1
/2"
Ove
rall
Hei
ght
(Sta
ndar
d C
ylin
der)
31"
Overall Width 24"
Overall Depth 22"
WEIGHTGuest Cantilever 20 lbsGuest Four-Leg 20 lbs
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
work chairs
seating price & user guide – January 28, 2019
amicus adjustment features & instructions
SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT
LUMBAR HEIGHT ADJUSTMENT BACK TILT LOCK ADJUSTMENT
TILT TENSION ADJUSTMENT ARM WIDTH ADJUSTMENT
To adjust the angle of recline, pull the lever up to unlock the back and leave the chair in free flow mode . Recline to the desired position and push the lever down to lock the back in place .
To adjust the lumbar height, grasp both levers and slide them up or down to the desired position . Not available on Amicus General Use Chairs .
To adjust the seat depth, push the lever down and simultaneously lift your weight from the seat while sliding the seat forward or backward . Release the lever to lock the seat in place . Not available on Amicus General Use Chairs .
To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place . To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place .
Leaning back, determine if the resistance of the chair is comfortable . For less resistance, pull tension adjustment lever out and turn it counterclockwise . For greater resistance, turn the lever clockwise .
To adjust the width of each arm, push the lever down to release the arm lock . Slide the arm inward or outward to the desired position . Push the lever up to lock the arm in place .
work chairs
seating price & user guide – January 28, 2019
amicus adjustment features & instructions (continued)
2D ARM HEIGHT ADJUSTMENT 3D ARM ADJUSTMENT
3D ARM PIVOT ADJUSTMENT
To pivot the arm cap, grasp and rotate inward or outward to the desired position .
To adjust the arm height, press the top half of the button in and raise or lower it to the desired position . Release the button to lock in place .
To adjust the arm height, lift the button under the arm cap to raise or lower it to the desired position . Release the button to lock in place .
work chairs
seating price & user guide – January 28, 2019
N A C X Amicus – Synchro-Tilt Task Chair
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Back tilt can be locked in five positions or left free flow• Frame, outer back and five star base are plastic• Synchro-tilt 2 .7:1 ratio• Tension control• Seat depth adjustment of 2-1/2"• Lumbar height adjustment of 4"• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and inside back .Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat and the other fabric to the inside back . First fabric listed will apply to the back and is the grade of fabric used to price the chair . A dual upholstery upcharge applies .
Fixed T-Arm
2D Arm
Size
F Mid-Back
H High-Back
Mechanism Style
1 Standard Synchro-Tilt (with seat slider)
Arm Style
N No Arms
F Fixed T-Arms
W 2D Width and Height-Adjustable T-Arms
P 3D Width and Height-Adjustable T-Arms with Pivot
Upholstery Style
S Single Upholstered
D Dual Upholstered
Back Upholstery Finish
Fabric
Leather
Seat Upholstery Finish
Fabric
Leather
Cylinder Style
1 Standard
2 High
3 Low
Frame and Base Finish
E Ebony
Casters/Glides (Optional)
A Casters, Soft
B Glides, Hard
C Glides, Soft
PRODUCT OPTIONS
NACX H 1 L S 1 E
SAMPLE ORDER CODE
3D Arm
M501 M502
DESCRIPTION PRICE COM/ COL/MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 919 964 1005 1049 1094 1136 1179 1224 1267 1417Fixed T-Arms 1022 1066 1107 1151 1195 1239 1281 1325 1368 15192D Width and Height-Adjustable T-Arms 1043 1091 1132 1175 1219 1263 1305 1349 1393 15433D Width and Height-Adjustable T-Arms 1096 1139 1183 1226 1269 1313 1356 1399 1443 1594
Leather Leather Leather Leather LA LB LC LD
No Arms 1266 1317 1474 1526Fixed T-Arms 1367 1418 1576 16272D Width and Height-Adjustable T-Arms 1392 1443 1599 16513D Width and Height-Adjustable T-Arms 1442 1494 1650 1703If Dual Upholstered (D) is specified add 193
If Soft Casters (A) are specified add 21
If Hard Glides (B) are specified add 21
If Soft Glides (C) are specified add 33
Pricing is continued on the following pages.
work chairs
seating price & user guide – January 28, 2019
N A C X Amicus – Synchro-Tilt
Task Chair (Continued)
DESCRIPTION PRICE
COM/ COL/HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 1038 1091 1140 1191 1241 1291 1344 1394 1444 1619Fixed T-Arms 1140 1191 1242 1292 1343 1394 1445 1495 1547 17222D Width and Height-Adjustable T-Arms 1165 1215 1267 1317 1367 1417 1470 1519 1570 17453D Width and Height-Adjustable T-Arms 1215 1266 1317 1367 1417 1468 1519 1570 1619 1798
Leather Leather Leather Leather LA LB LC LD
No Arms 1486 1556 1764 1833Fixed T-Arms 1589 1657 1865 19342D Width and Height-Adjustable T-Arms 1613 1682 1891 19593D Width and Height-Adjustable T-Arms 1664 1733 1939 2008If Dual Upholstered (D) is specified add 193
If Soft Casters (A) are specified add 21
If Hard Glides (B) are specified add 21
If Soft Glides (C) are specified add 33
work chairs
seating price & user guide – January 28, 2019
FEATURES• Outer back and arms are plastic and finished in Ebony• Multi-surface glides are standard when the Cantilever or Four-Leg frame style is
specified• Hard casters are standard when the Four-Leg with Casters frame style is specified .
Soft casters may be ordered as an optionNOTESWhen plastic back style is specified only the seat will be upholstered . When upholstered pad on plastic back is specified both the seat and inside back will be upholstered .Not all configurations are available as Xpress . Please see Xpress catalogue and/or specification software for details .
N A M G Amicus – Guest Chair
Size
D Low-Back
Frame Style
C Cantilever with Glides
F Four-Leg with Glides (Shown)
G Four-Leg with Casters
Arm Style
N No Arms
K Integrated Arms
Upholstery/Back Style
Z Plastic
U Upholstered Pad on Plastic Back
Upholstery Finish
Fabric
Leather
Frame Finish
E Ebony
K Mica Silver
Casters/Glides (Optional)
A Casters, Soft (For G frame style)
D Glides (For C and F frame style)
PRODUCT OPTIONS
SAMPLE ORDER CODE
NAMG D C K Z K
Xpress
Four-Leg with Glides Cantilever with Glides
DESCRIPTION PRICE
WITHOUT CASTERS COM/ COL/ FOUR-LEG (F) PLASTIC BACK (Z) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 357 387 417 448 478 509 539 569 600 706Integrated Arms 400 429 460 492 521 551 581 612 644 748
FOUR-LEG (F) UPHOLSTERED BACK (U)No Arms 409 440 472 501 531 561 592 624 654 760Integrated Arms 452 481 513 543 574 603 634 666 696 802
CANTILEVER (C) PLASTIC BACK (Z)No Arms 416 447 477 507 538 568 599 629 659 766Integrated Arms 459 491 520 550 580 611 642 672 703 807
CANTILEVER (C) UPHOLSTERED BACK (U)No Arms 469 499 530 560 591 621 653 683 713 819Integrated Arms 511 542 573 602 633 664 695 725 755 862If Mica is specified add 63
If Soft Casters (A) are specified add 33
Pricing is continued on the following pages.
work chairs
seating price & user guide – January 28, 2019
Xpress
N A M GAmicus – Guest Chair (Continued)
DESCRIPTION PRICE
WITHOUT CASTERS (CONTINUED) Leather Leather Leather Leather FOUR-LEG (F) PLASTIC BACK (Z) LA LB LC LD
No Arms 563 594 683 712Integrated Arms 607 636 725 754 FOUR-LEG (F) UPHOLSTERED BACK (U)No Arms 617 648 736 766Integrated Arms 659 690 779 807 CANTILEVER (C) PLASTIC BACK (Z)No Arms 624 654 742 771Integrated Arms 666 696 784 813 CANTILEVER (C) UPHOLSTERED BACK (U)No Arms 677 707 797 825Integrated Arms 720 749 838 867
WITH CASTERS COM/ COL/ FOUR-LEG (F) PLASTIC BACK (Z) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 391 422 452 482 512 542 573 602 634 740Integrated Arms 434 463 494 525 555 586 615 646 677 782 FOUR-LEG (G) UPHOLSTERED BACK (U)No Arms 443 474 505 535 565 595 626 657 688 793Integrated Arms 486 516 548 578 608 637 668 699 730 836
Leather Leather Leather Leather LA LB LC LDFOUR-LEG (G) PLASTIC BACK (Z)No Arms 598 628 716 746Integrated Arms 641 670 760 788 FOUR-LEG (G) UPHOLSTERED BACK (U)No Arms 651 682 770 800Integrated Arms 693 724 811 841If Mica is specified add 63
If Soft Casters (A) are specified add 33