Multipurpose Onboard Powertrain Waste

Marine Industry ProductsIssue - TRMARINECAT.08.01

Effective 01/03/08

Marin

e B

rochure

Product PageSink Hose 1Sanisure Marine Waste 1Sullage Hose 1Marine Exhaust 1Air Breather Hose 2True Blue Airline 2Black Corrugated EVA Tube 2Armorvin 2Turbo Silicone Hose 3Superflex Calor 3Allflex 4Blue Suction 4Fire Reel Hose 5Water Ace 5Clear Vinyl Tubing 5Drinking Water Hose 5Grey Suction 6Safety Yellow 6Rubber Water Suction 6Rubber Water Delivery 7Radiator Hose 7Multipurpose Hose 8Fuel Line 8Hydraulic Return Line 8Hi-Flex Petroleum Suction 9Steam Hose 9Xtreme Steam 9GP Steam 9Vacupress Oil 10Carbopomp Fuel Hose 10Camlocks 11Fittings/Valves 12Band-It Clamping/Banding 13Band-It Accessories 14Fender/Docking, Strainers, Clamps 15Insertion Rubber, Anti-Slip Matting 16Corrosion Information 17Power Transmission 18

Contents

(Terms & Conditions) are stated on pages 19 and 20

Marine Industry Products

= Made in Australia

LegendMultipurposeProducts that may have many varied uses around shipping yards, boatyards, docks, boat building and maintenance facilities.

Product Application PageTrue Blue Airline Air tools, water 2Armorvin Food grade PVC, water suction 2Blue Suction Water, sullage,petroleum products 4Fire Reel Hose Fire reel, sturdy washdown hose 5Water Ace Washdown boats, shipyards, lawns 5Grey Suction Water, slurry, some chemicals 6Safety Yellow General, industrial washdown 6Rubber Water Suction Seawater, slurry+ abrasion resistant 6Rubber Water Delivery Same as above but delivery only 7Rubber Multipurpose Hose Air, water, oil, petroleum, chemicals 8Steam Hose < Saturated steam applications 9Xtreme Steam < Superheated steam applications 9GP Steam < Saturated, grease proof, non marking 9Vacupress Oil Flexible oils, fuels transfer 10Camlocks Stainless, brass, polypropylene 11Ball Valves Stainless 12Lumpends, Nut & Tails, Gaskets Stainless, brass, polypropylene 12Band-It Strap and Totes Check grades 13Band-It Tightening Tool & Adaptor Check grades 14Band-It System Products Check grades 14Worm Dive Clamps Full stainless non-slotted 15Poly Strainers Strainers for water suction 15Sheet-Insertion Rubber For gaskets and other uses. 16

Marine Industry Products

PowertrainProducts that will be used on and around mechanical parts on a boat. Fuel hoses, ducting, power transmission.

Product Application PageTasman Marine Exhaust DNV-Lloyds-VTT-Nordic-Marine Exhaust 1Black Corrugater EVA Tubing Light ducting for containing wiring 2Superflex Calor TPR Ducting Heat resistant TPR ducting with wire 3Turbo Silicone Hose Silicone tube-bends-reducers 3Radiator Hose Straight 1mt radiator hose 7Fuel Line Low pressure petroleum, SAE30R7 8Hydraulic Return Line Hydraulic tank return line 8Hi-Flex Petroleum Hose Premium fuel, oil, diesel, SAE100R4 9Carbopomp Petroleum Delivery Fuel, diesel oil, unleaded, eco-diesel. 10Power Transmission Range of belts.Timing-poly-vari-ribbed 18

OnboardProducts for use on and around boats for maintenance, fittings, valves, matting and other general purpose uses.

Product Application PageAir Breather Hose Divers Air Hose 2Allflex Food grade & petroleum resistant 4Clear Vinyl Tubing Liquid and beverage transfer 5Drinking Water Hose Potable, drinking water transfer 5Stainless Super Clamps Full stainless super clamps 13Fender Rubber-Docking White & black fender 15Anti-Slip Matting Various shapes and sizes 16

WasteProducts that may be used for discharge or transfer of grey water, effluent waste, sink, shower, bath and other waste water.

Product Application PageSink Hose Sink waste water, smooth inside. 1Sanisure Effluent Waste Hose Effluent discharge-odour free 1Purple Sullage Hose Purple sullage, grey water hose. 1

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)D1SH019 19 25 N/A 2 25 20D1SH025 25 31 N/A 2 30 20D1SH028 28 34 N/A 2 30 20D1SH032 32 38 N/A 2 33 20D1SH038 38 46 N/A 2 35 20

Sink Hose

Construction: Black PVC with external PVC helix, smooth inside restricts bio build-up.Common usages: Super flexible lightweight hose for low pressure transfer of waste water

CODE I.D.(mm) O.D.(mm) W.P.(Bar) Kg/Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)HFM019 19 24 5 0.25 6 80 20HFM025 25 30 4 0.3 6 90 20HFM040 38 45 3 0.65 6 100 20

Sanisure

Construction: White PVC nitrile blend with solid PVC helixCommon usages: Toilet and sullage lines in marine applications designed to minimise odours

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/SUL019 19 23 N/A 0.25 20,100P/SUL025 25 31 N/A 0.4 20,80

Purple Sullage Tube

Construction: Purple PVC tube - Also available reinforced premium in /P code.Common usages: Low pressure waste water transfer

CODE PREMIUM I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/SUL019/P 19 25 10 0.31 20,30,100

Marin

e B

rochure

CODE I.D. (mm) O.D.(mm) W.P. (Bar) Kg / Mt Coils (Mt) Bend Radius (Mm)RPS4025 25 - 3 .56 20/61 85RPS4032 32 - 3 .65 20/61 100RPS4038 38 - 3 .73 20/61 120RPS4044 44 - 3 .86 20/61 135RPS4051 51 - 3 1.06 20/61 145RPS4057 57 - 3 1.20 20/61 170RPS4060 60 - 3 1.26 20/61 180RPS4064 63.5 - 3 1.30 20/61 190RPS4070 70 - 3 1.37 20/61 210RPS4076 76 - 3 1.46 20/61 235RPS4089 89 - 3 1.71 20/61 290RPS4102 102 - 3 2.05 20/61 340RPS4114 114 - 3 2.41 20 410RPS4127 127 - 3 2.58 20 455RPS4152 152 - 3 2.97 20 575RPS4204 204 - 3 3.62 20 775

Construction: Black smooth exhaust gas resistant wrapped construction tube. Reinforcement plies of high strength synthetic cord incorporating a steel wire helix. Black corrugated ozone and oil resistant cover. -30 °C to +100 °C.Common usages: Lightweight highly flexible suction and discharge hose suited for the transfer of marine exhaust and sea water mixture. Complies with: Nordic Boat Standard MC9, DNV-Lloyds, VTT National Maritime Sweden.

Marine ExhaustLloyds Approved

1

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils / Spools (Mt)P/TB006 6 12 16 0.11 20,100 / 300P/TB008 8 14 16 0.14 20,100 / 300P/TB010 10 16 16 0.19 20,30,100 / 300P/TB012 12.5 19 16 0.22 20,30,100 / 200

True Blue® Airline

Construction: Blue and yellow striped, super flexible braided PVC hose to AS2554 Class B Common usages: Air tools, nail guns and general air and water applications

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils / Spools (Mt)P/ABD08 8 14 24 0.14 100 / 300P/ABD10 10 17 24 0.22 100 / 300

Air Breather Hose

Construction: Yellow covered divers hose approved to AS 2299 & AS/NZ 1716Common usages: Air line to divers and breathing apparatus in spray and blast booths.

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) Kg / Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)BF025INM 25 33 0.185 4 70 30BF032INM 32 42 0.28 4 90 30BF038INM 38 48 0.38 4 100 30BF050INM 50 62 0.55 4 125 30

Black Corrugated

Construction: Premium grade EVA corrugated tube Common usages: General purpose vacuum applications. UV resistant, super flexible and is used in low pressure applications and sleeving of products.

CODE I.D.(mm) O.D.(mm) W.P.(Bar) Kg/Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)HEL006 6 12 7 0.1 8.5 20 60HEL010 10 16 7 0.16 8.5 25 60HEL012 12 18 6 0.18 8.5 35 60HEL016 16 24 6 0.24 8.5 50 60HEL019 19 26 5 0.35 8.5 50 60HEL025 25 33 4 0.51 8.5 60 60HEL032 32 41 4 0.65 8.5 75 60HEL038 38 47 4 0.8 8.5 90 30HEL040 40 54 4 0.87 8.5 95 30HEL045 45 58 3 1.1 8 110 30HEL050 50 64 3 1.2 8 125 30HEL065 65 79 3 1.8 8 190 30HEL080 75 92 2 2.5 7 200 30HEL100 100 114 2 3.2 7 300 30HEL125 125 138 2 5.4 9 350 20HEL150 150 169 2 7.2 9 450 20

Armorvin®

Construction: Clear food grade PVC incorporating a wire helixCommon usages: Transfer of food products, alcohol and liquids when a translucent hose is needed.

2

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) VAC M.H2O Kg / Mt Coils/Spools (Mt) B.Radius (Mm)D1RFH040 40 46 3 .26 30 40D1RFH045 45 51 3 .28 30 45D1RFH050 50 56 3 .31 30 50D1RFH060 60 66 2.5 .36 30 60D1RFH063 63 70 2.5 .38 30 63D1RFH070 70 77 2.5 .50 30 70D1RFH075 76 83 2.5 .55 30 76D1RFH080 80 87 2.5 .60 30 80D1RFH089 90 97 2.5 .64 30 90D1RFH100 100 107 2.5 .71 30 100D1RFH110* 110 117 2.5 .75 30 110D1RFH120 120 127 2.5 .80 30 120D1RFH125 127 134 2.5 .85 30 127D1RFH130* 130 137 1.2 .89 30 130D1RFH140* 140 147 1.2 .95 30 140D1RFH150 150 157 1.2 1 30 150D1RFH160* 160 167 1.2 1.1 30 160D1RFH170* 170 177 1.2 1.1 30 170D1RFH175 180 188 1.2 1.2 30 180D1RFH200 200 208 0.5 1.3 30 200D1RFH250 250 259 0.5 1.9 15 250D1RFH300 300 309 0.5 2.3 15 300

Superflex Calor

Construction: Made from TPR rubber with a wire reinforced helix. Excellent with flex fatigue, UV stabilised and resistant to a wide range of chemicals and hydrocarbons. -25 °C to +125 °C.Common usages: Can be used in a wide range of applications such as transfer of abrasive material, acid fume extraction, hot air ducting and combustion air ducting. Commonly used for under bonnet applications in vehicles. Lengths available up to 30 metres.

Fume Extraction Ducting

For high temp and pressure applications such as turbo systems

Reinforced silicone straight hose, bends, reducers and flexible parts.

Phone for price, availability and information.

Silicone Hose Available

3

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)HFB025 25 32 10 0.42 8 100 20,50HFB032 32 39 9 0.55 8 140 20,50HFB040 38 45 8 0.75 7 200 20,50HFB050 50 59 7 1.22 7 250 20,50HFB064 64 73 6 1.75 7 350 20,50HFB080 75 87 6 1.95 7 380 20,50HFB100 100 116 5 3.4 6 600 20HFB125 125 142 4.5 4.4 6 800 20HFB140 140 156 4 5.1 6 900 20HFB150 150 170 4 6.5 6 1000 20

Blue Suction

Construction: Blue Nitrile/PVC blend with solid white PVC helix. Quality product. Common usages: Suction and delivery of petroleum based products and sullage applications

Marin

e B

rochure

CODE I.D.(mm) O.D.(mm) W.P. (Bar) Kg / Mt Coils (Mt)P/ALF06 6 10 16 0.08 20,100 / 300P/ALF08 8 12 16 0.09 20,100 / 300P/ALF10 10 15 16 0.13 20.100 / 200P/ALF12 12.5 18 16 0.18 20,100/200P/ALF16 16 24 16 0.25 20,100P/ALF19 20 26 16 0.34 20,100/100P/ALF25 25 33 14 0.52 20,100P/ALF32 32 43 12 0.92 20,60P/ALF38 38 50 12 1.31 20,60P/ALF50 50 65 10 2.12 20,60

Allflex

Construction: Clear braided PVC, food grade & petroleum resistant AS2554 & AS2070 Common usages: Multipurpose delivery hose suitable for a wide range of applications.

In house hose fitting and assembly feature.

Specialist in fitting of custom jobs such as swaging, kit construction, table fittings, bauer type couplings, steam hoses, sanitary food and beverage hoses, air hoses and many others.

Expert knowledge about many types of fittings allows Totalrubber to provide safe and correctly working productsfor various applications.We can design a custom assembly for a certaintask that will be perfect for the customer.

Workshop Facility

4

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils MtP/FR019B 20 26 10 0.36 20,36,100P/FR019Y 20 26 10 0.36 20,100P/FR025B 25 32 10 0.52 20,36,100

Construction: Black or yellow ribbed cover PVC braided pressure hose AS1221 Common usages: Stationary and mobile fire reel applications for rural & commercial applications.

Fire Reel Hose

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/WD012 12.5 19 10 0.19 20,100P/WD019 20 27 10 0.38 20,100P/WD025 25 35 10 0.5 20,100P/WD032 32 43 7 0.9 20,100P/WD038 38 49 7 1.3 20,60

Construction: White with blue stripe, super flexible water delivery hose. - Non Marking - Common usages: Light weight hose ideal for on-board, mariners, wash down and fender for small boats.

Water Ace

5

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/CVT03 3 5 8 0.015 30/200P/CVT04 4 6 7 0.025 30P/CVT05 5 8 7 0.033 30/200P/CVT06 6 9 6 0.037 30/200P/CVT08 8 11 5 0.054 30/100P/CVT10 10 13 4 0.067 30/100P/CVT10HD 10 15 5 0.69 30P/CVT12 12.5 15.5 4 0.091 30/100P/CVT16 16 19 4 0.126 30P/CVT19 19 23 3 0.167 30P/CVT19HD 19 4 0.185 30P/CVT25 25 31 3 0.27 30P/CVT32 32 38 2 0.42 30P/CVT40 40 47 2 0.66 30P/CVT50 50 58 2 0.98 15

Construction: Clear food grade PVC tubing to AS2070 - Un-reinforcedCommon usages: Low pressure transfer of liquids and beverages

Clear Vinyl Tubing

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/DWH012 12 17 7 0.22 10,20,100

Construction: Specifically designed food grade tube to FDA 21 CFr 177Common usages: Drinking water supply line to caravans and marine applications

Drinking Water Hose

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)HFG025 25 32 10 0.35 8 100 20,50HFG032 32 39 9 0.55 8 140 20,50HFG040 38 46 8 0.68 7 200 20,50HFG050 50 60 7 1.22 7 250 20,50

HFG064 64 75 6 1.75 7 350 20,50HFG080 75 87 6 1.95 7 380 20,50HFG100 100 116 5 3.4 6 600 20HFG125 125 142 4.5 4.4 6 800 20HFG150 150 170 4 6.5 6 1000 20

Grey Suction

Construction: Flexible grey PVC with rigid PVC helixCommon usages: General purpose suction and delivery of water, slurrys and some chemicals

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)P/STF010 10 16 18 0.15 20,100 / 300P/STF012 12.5 19 18 0.19 20,100 / 200P/STF020 20 26 16 0.36 20,100 / 100P/STF025 25 35 16 0.55 20,100P/STF032 32 44 12 0.9 20,60P/STF038 38 52 10 1.5 20,60P/STF050 50 62 10 2.2 20,60

Safety Yellow

Construction: Yellow ribbed cover, braided pressure hose to AS2554 Class B Common usages: General purpose hose for varied industrial and rural applications

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)RWS1019 19 31 10 .57 20/61RWS1025 25 36 10 .92 20/61RWS1032 32 43 10 1.08 20/61RWS1038 38 49 10 1.24 20/61RWS1044 44 56 10 1.48 20/61RWS1051 51 63 10 1.77 20/61RWS1057 57 70 10 1.90 20/61RWS1064 64 77 10 2.14 20/61RWS1076 76 89 10 2.83 20/61RWS1089 89 102 10 3.50 20/61RWS1102 102 118 10 5.10 20/61RWS1114 114 132 10 6.50 20RWS1127 127 146 10 8.10 20RWS1152 152 170 10 9.30 20RWS1204 204 223 4 14.60 6RWS1254 254 282 4 19.20 6RWS1305 305 335 4 25.60 6

Rubber Water Suction

Construction: Black smooth synthetic rubber wrapped construction tube. Reinforcement plies of high strength synthetic cord incorporating a steel wire helix.Common usages: Abrasion resistant medium duty suction hose suitable for use in Agricultural, Mining, Construction and Marine industry. Suitable for water, sea water and light slurry. -20°C to +80 °C.

Water/Slurry/Sea Water

6

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils / Spools (Mt)RWD1012 12 21 10 .35 20/61RWD1019 19 28 10 .54 20/61RWD1025 25 34 10 .66 20/61RWD1032 32 42 10 .93 20/61RWD1038 38 48 10 1.07 20/61RWD1044 44 54 10 1.39 20/61RWD1051 51 61 10 1.43 20/61RWD1057 57 68 10 1.65 20/61RWD1064 64 74 10 1.81 20/61RWD1070 70 82 10 2.18 20/61RWD1076 76 89 10 2.39 20/61RWD1089 89 98 10 3.13 20/61RWD1102 102 114 10 3.75 20/61RWD1114 114 127 10 3.91 20RWD1127 127 140 10 4.12 20RWD1152 152 165 8 4.88 20RWD1204 204 214 8 7.74 20RWD1254 254 270 8 10.10 20

Rubber Water Delivery

Construction: Wrapped construction black synthetic rubber tube, with high strength synthetic cord reinforcement plies. -20 °C to +80 °C.Common usages: General purpose industrial water transfer applications.

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt LengthRWD4019 19 29 5 .55 1MT LENGTHRWD4022 22 32 5 .66 1MT LENGTHRWD4025 25 35 5 .80 1MT LENGTHRWD4028 28 38 5 .85 1MT LENGTHRWD4032 32 44 5 1.25 1MT LENGTHRWD4035 35 48 5 1.45 1MT LENGTHRWD4038 38 51 5 1.55 1MT LENGTHRWD4041 41 54 5 1.65 1MT LENGTHRWD4044 44 57 5 1.75 1MT LENGTHRWD4048 48 61 5 1.85 1MT LENGTHRWD4051 51 63 5 1.95 1MT LENGTHRWD4054 54 67 5 2.10 1MT LENGTHRWD4057 57 70 5 2.20 1MT LENGTHRWD4060 60 73 5 2.23 1MT LENGTHRWD4064 64 76 5 2.35 1MT LENGTHRWD4067 67 80 5 2.37 1MT LENGTHRWD4070 70 82 5 2.40 1MT LENGTHRWD4073 73 86 5 2.55 1MT LENGTHRWD4076 75 89 5 2.75 1MT LENGTH

Radiator Hose

Construction: Wrapped construction black smooth synthetic rubber tube with plies of high strength synthetic cord reinforcement. Abrasion and weather resistant.Common usages: Heavy duty mandrel built straight radiator hose for the transfer of water in motor cooling systems. -35 °C to +98 °C.

Straight Radiator Hose

7

Marin

e B

rochure

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils / Spools (Mt)RPD2003 3 10 5 .12 20/200RPD2005 5 12 5 .16 20/200RPD2006 6 13 5 .17 20/200RPD2008 8 14 5 .19 20/200RPD2010 10 16 5 .22 20/200RPD2012 12 20 5 .30 20/200

Fuel Line

Construction: Extruded construction tube, black nitrile rubber 55% aromatic content. Reinforced with braided synthetic cord. Black smooth oil and fuel resistant synthetic rubber cover. -35 °C to +100 °C.Common usages: Designed for use in vehicle fuel systems for the transfer of petroleum under low pressure. Conforms to SAE30R7 specification. Not for use with pressurised fuel injection applications.

Low Pressure Petroleum Transfer

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils/Spools (Mt) B/Radius (Mm)RPS2019 19 32 20 .85 20/40 120RPS2025 25 40 17 1.30 20/40 150RPS2032 32 47 14 1.52 20/40 190RPS2038 38 53 10 1.84 20/40 240RPS2051 51 66 7 2.30 20/40 300RPS2064 64 79 5 2.96 20/40 380RPS2076 76 91 5 3.37 20/40 460

Construction: Black smooth nitrile wrapped construction rubber tube. 55% aromatic content. Reinforcement plies of high strength synthetic cord incorporating a steel wire helix. -35 °C TO +80 °CCommon usages: Designed to be used as a hydraulic oil tank return line on hydraulic systems. Fully complies with SAE100R4

Hydraulic Oil Return Line

Hydraulic Return

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils (Mt)

RMD1005 5 12 20 .16 20/200RMD1006 6 13 20 .17 20/200RMD1008 8 15 20 .20 20/200RMD1010 10 17 20 .24 20/200RMD1012 12 21 20 .34 20/200RMD1016 16 26 20 .53 20/200RMD1019 19 29 20 .60 20/200RMD1025 25 36 20 .80 20/200RMD1032 32 44 20 1.28 20/40RMD1038 38 53 20 1.49 20/40RMD1051 51 63 10 2.65 20

Multipurpose Hose

Construction: Black smooth extruded construction nitrile rubber tube, resistant to 55% aromatic content. Electrically non-conductive. Braided synthetic cord reinforcement with red non-conductive ozone, weather and oil resistant cover. Common usages: Suitable for transfer of ulp at low pressure. Suitable for conveying air, water, oil, petroleum and various chemicals. -25 °C to 100 °C and doesn’t have a static wire. Not recommended as a fuel line.

Air-Water-Petroleum-Oil-Chemicals

8

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Coils/Spools (Mt) B.Radius (Mm)RPS5019 19 31 16 .62 40 45RPS5025 25 37 16 .77 40 55RPS5032 32 44 16 .92 40 70RPS5038 38 51 16 1.19 40 85RPS5051 51 66 16 1.87 40 110RPS5064 64 79 16 2.25 40 140RPS5076 76 92 16 2.93 40 170RPS5102 102 118 16 4.20 40 230RPS5127 127 142 16 5.90 20 290RPS5152 152 168 16 7.50 20 340

Hi-Flex Petroleum Suction

Construction: Wrapped construction tube, Black smooth conductive NBR rubber, for products with up to 60% aromatic content. Reinforcement plies of high strength synthetic cord incorporating anti-static wire and steel wire helix. The black smooth conductive rubber cover is oil and flame resistant. -25 °C to +80 °C.Common usages: Premium quality, extra flexible suction and delivery hose for the transfer of oils, diesel fuel and petroleum based products. Recommended for tank truck service and heavy offshore applications. Suitable for use with unleaded fuel with a maximum 5% MTBE and 15% oxygenated compounds. Meets EN12115 specifications and fully complies with SAE-100R4

Marin

e B

rochure

9

CODE I.D.(mm) O.D.(mm) W.P.(Bar) Kg/Mt Temp °C Coils (Mt)RSD1012 12 25 8 0.40 -40 to +170 20/61RSD1019 19 32 8 0.58 -40 to +170 20/61RSD1025 25 38 8 0.72 -40 to +170 20/61RSD1032 32 47 8 1.00 -40 to +170 20/61RSD1038 38 54 8 1.20 -40 to +170 20/61RSD1051 51 68 8 1.68 -40 to +170 20/61

Steam

Construction: Wrapped smooth EPDM heat resistant rubber tube. Strong synthetic cord reinforcement plies and EPDM cover.Common usages: Mandrel built steam supply hose for use with saturated steam at a maximum 8BAR.

CODE I.D.(mm) O.D.(mm) W.P.(Bar) Kg/Mt Temp °C Coils (Mt)RSD3012 12 25 8 0.40 -40 to +170 20/61RSD3019 19 32 8 0.58 -40 to +170 20/61RSD3020 19 34 8 0.51 -40 to +170 20/61RSD3025 25 38 8 0.72 -40 to +170 20/61

GP Steam

Construction: Wrapped smooth EPDM heat resistant rubber tube. Strong synthetic cord reinforcement plies and EPDM cover.Common usages: Non marking mandrel built saturated steam hose for use in greasy or oily areas. Max 8BAR working pressure.

CODE I.D.(mm) O.D.(mm) W.P.(Bar) Kg/Mt Temp °C Coils (Mt)RSD2012 12 25 17 0.53 -40 to +210 20/61RSD2019 19 31 17 0.68 -40 to +210 20/61RSD2025 25 37 17 0.90 -40 to +210 20/61RSD2032 32 46 17 1.31 -40 to +210 20/61RSD2038 38 54 17 1.60 -40 to +210 20/61RSD2051 51 67 17 2.20 -40 to +210 20/61

Xtreme Steam

Construction: Wrapped smooth EPDM heat resistant rubber tube. Steel wire reinforcement plies and EPDM cover.Common usages: Mandrel built high pressure braided steam hose for use with super heated steam at a maximum 17BAR.

Specialised couplers must be used with steam hoses and

steam applications.

Marin

e B

rochure

10

Carbopomp M 000 Fuel DeliveryConstruction: Black smooth synthetic rubber suitable for petroleum products up to 50% aromaticcontent and 15% oxygenated compounds, biodiesel, ecological fuel.Reinforcement : High strength textile plies.Common usages: Black smooth self-extinguishing rubber resistant to abrasion, heat, oil and marineenvironment. Long length hose suitable for delivery of petrol, diesel and biodiesel to engine on private boats up to 24mt. Complying SAE J 1527 : 2004 USCG-A1-ISO 7840:2004 A1 CE Homologated DIP 128405/MI/1 0474 R.I.N.A AND nr. 06/00078 LLOYD’S REGISTER. Registered NMMA Nr. 2459118 and Nr. 2459119 -20°C to +80°C

Carbopomp Fuel HosesUlp-Diesel-Bio Diesel-Oil

Also available in corrugated.

I.D. MM O.D. MM KG/MT VACUUM/KPA WP/BAR Burst/BAR6 15 .215 80 >3.5 >148 16 .220 80 >3.5 >1410 18 .255 80 >3.5 >1412 21 .340 35 >2.5 >1016 25 .420 35 >2.5 >1019 29 .550 35 >2.5 >1020 31 .700 >5325 37 .860 >4430 42 .995 >3832 44 1.050 >3735 47 1.130 >3438 52 1.400 >3040 54 1.480 >2945 59 1.650 >2648 62 1.720 >2550 64 1.800 >2457 71 1.980 >2260 74 2.080 >20

I.D. MM O.D. MM KG/MT WP/BAR Burst/BAR5 12 .110 >10 >306 13 .125 >10 >307 13 .140 >10 >308 14.8 .150 >10 >3010 16.5 .180 >10 >30

Carbopomp / EC10NL High Pressure Fuel Delivery

Construction: Black smooth rubber suitable for petroleum products up to 50% aromatic contentand for unleaded petrol with a maximum content : MTBE 5% : oxygenated compounds 15%. Black smooth oil, fuel, heat and ageing resistant rubber.Reinforcement : High strength textile yarns.Common usages: Long length heat resistant delivery hose for fuel, diesel oil, unleaded petrol and eco-diesel. Specially suitable to supply outboard motors.

Enquire regarding price and availability.

CODE I.D. (mm) O.D. (mm) W.P. (Bar) Kg / Mt Vac Mt/H2O B.Radius (Mm) Coils (Mt)P/VACOIL025 25 36 16 0.64 9 80 60P/VACOIL032 32 43 16 0.8 9 100 60P/VACOIL038 38 51 14 1.2 9 125 40P/VACOIL050 50 63 12 1.5 9 150 40

Vacupress Oil®

Construction: Composition of PVC-PU and Nitrile rubber, incorporating a wire helix and polyester yarns.Common usages: Extremely flexible and abrasion resistant for transfer of oils and fuels.Not suitable for ULP.

Marin

e B

rochure

11

STAINLESSDimensions produced to Mil-C-27487F

Material USA grade 316 stainless steel (DIN 1.4401 equiv)

Maximum working pressure12mm to 51mm 250psi64mm to 102mm 150psi127mm to 152mm 75psi

Standard WasherBuna-N (Nitrile)

Standard levers and pinsS/S levers, Stainless pins

Temperature Range-40°C to +230°C (With teflon seal)

Standard ThreadBritish Standard Pipe(NPT available on request)

BRASSDimensions produced to Mil-C-27487F

Material ASTM C85700 gr.copper alloy (DIN1790 gr.CuZn37Pb)

Maximum working pressure12mm to 51mm 250psi64mm to 102mm 150psi127mm to 152mm 75psi

Standard WasherBuna-N (Nitrile)

Standard levers and pinsBronze levers, Stainless pins

Temperature Range-40°C to +200°C (With teflon seal)

Standard ThreadBritish Standard Pipe(NPT available on request)

POLYPROPYLENEDimensions produced to Mil-C-27487F

Material Polypropylene(Fibreglass Reinforced)

Maximum working pressure12mm to 51mm 100psi(up to 60°C)

64mm to 102mm 50psi(up to 60°C)

Standard WasherBuna-N (Nitrile)

Standard levers and pinsStainless levers, Stainless pins

Temperature Range-25°C to +100°C

Standard ThreadBritish Standard Pipe(NPT available on request)

FOR COMPLETE PART NUMBER SUBSTITUTE THE FOLLOWING

“S” IN PLACE OF “ - “ FOR STAINLESS - SAMPLE STAINLESS FC-200A = FCS200A“B” IN PLACE OF “ - “ FOR BRASS - SAMPLE BRASS FC-200A = FCB200A“P” IN PLACE OF “ - ” POLYPROPYLENE - SAMPLE POLYPROPYLENE FC-200A = FCP200A

All 316 Stainless products are to be used for deck and hull applications above the water line.

SIZE TYPE-A TYPE-B TYPE-C TYPE-D TYPE-E TYPE-F TYPE-DP TYPE-DC12mm (1/2”) FC-050A FC-050B FC-050C FC-050D FC-050E FC-050F FC-050DP FC-050DC19mm (3/4”) FC-075A FC-075B FC-075C FC-075D FC-075E FC-075F FC-075DP FC-075DC25mm (1”) FC-100A FC-100B FC-100C FC-100D FC-100E FC-100F FC-100DP FC-100DC32mm (1-1/4”) FC-125A FC-125B FC-125C FC-125D FC-125E FC-125F FC-125DP FC-125DC38mm (1-1/2”) FC-150A FC-150B FC-150C FC-150D FC-150E FC-150F FC-150DP FC-150DC51mm (2”) FC-200A FC-200B FC-200C FC-200D FC-200E FC-200F FC-200DP FC-200DC64mm (2-1/2”) FC-250A FC-250B FC-250C FC-250D FC-250E FC-250F FC-250DP FC-250DC76mm (3”) FC-300A FC-300B FC-300C FC-300D FC-300E FC-300F FC-300DP FC-300DC102mm (4”) FC-400A FC-400B FC-400C FC-400D FC-400E FC-400F FC-400DP FC-400DC127mm (5”) FC-500A FC-500B FC-500C FC-500D FC-500E FC-500F FC-500DP FC-500DC152mm (6”) FC-600A FC-600B FC-600C FC-600D FC-600E FC-600F FC-600DP FC-600DC

CamlocksStainless - Brass - Polypropylene

A full range of aluminium and nyglass camlocks are also available, as well as reducing and flanged.

CAMLOCKS

SIZE BSP X TAIL

BRASS L/END

POLYL/END

SS L/END

BRASS N&T

POLY N&T

GASKET NBR

1/2” X 12MM FTMB050 FTMP050 FTMS050 FTFB050 FTFP050 FTFG0503/4” X 12MM FTMB060 - - FTFB060 FTFP060 -3/4” X 19MM FTMB075 FTMP075 FTMS075 FTFB075 FTFP075 FTFG0751” X 12MM FTMB080 - - FTFB080 FTFP080 -1” X 19MM FTMB090 - - FTFB090 FTFP090 -1” X 25MM FTMB100 FTMP100 FTMS100 FTFB100 FTFP100 FTFG1001-1/4” X 25MM FTMB110 - - FTFB110 - -1-1/4” X 32MM FTMB125 FTMP125 FTMS125 FTFB125 FTFP125 FTFG1251-1/2” X 32MM FTMB130 - - FTFB130 - -1-1/2” X 38MM FTMB150 FTMP150 FTMS150 FTFB150 FTFP150 FTFG1502” X 38MM FTMB170 - - FTFB170 - -2” X 51MM FTMB200 FTMP200 FTMS200 FTFB200 FTFP200 FTFG2002-1/2” X 64MM FTMB250 FTMP250 FTMS250 FTFB250 FTFP250 FTFG2503” X 76MM FTMB300 FTMP300 FTMS300 FTFB300 FTFP300 FTFG3004” X 102MM FTMB400 FTMP400 FTMS400 FTFB400 FTFP400 FTFG400

Lump ends, nut & tails, gasketsStainless-Brass-Polypropylene

BRASS LUMP END

POLY LUMP END

STAINLESS LUMP END

BRASSNUT & TAIL

POLYNUT & TAIL

GASKETNBR

Light duty hose tail fittings for use in both suction and discharge applications. Joiners and Steel Hex Lumpends also available in sizes up to 12” upon request.

All 316 Stainless products are to be used for deck and hull applications above the water line.

Marin

e B

rochure

12

PRODUCT CODE SIZE MM

B/FBSBV006 6B/FBSBV010 10B/FBSBV012 12B/FBSBV020 19B/FBSBV025 25B/FBSBV040 38B/FBSBV050 50

Ball ValvesStainless Steel

PRODUCT CODE SIZE MM

B/FBSTV006 6B/FBSTV010 10B/FBSTV012 12B/FBSTV020 19B/FBSTV025 25B/FBSTV040 38B/FBSTV050 50

2 PIECE BALL VALVE

CF8M,316SSFull bore, 1000psi WP.Pure Teflon seals and seats.Lockable lever.Temp;-50°C to +230°CSuitable for Water, brine, gas, oil.Female x Male BSP

3 PIECE BALL VALVE

CF8M,316SSFull bore, 1000psi WP.Pure Teflon seals and seats.Lockable lever.Temp;-50°C to +230°CSuitable for Water, brine, gas, oil.Female x Male BSP

2pce 3pce

PRODUCT CODE GAUGE MM WIDTH QTY/MTRC203 .65 10 30C204 .75 13 30C205 .75 16 30C206 .65 19 30C203TY .65 10 30C204TB .756 13 30C205TG .75 16 30C206TR .75 19 30

Band-It Strap and Totes201 High Grade Stainless Steel

Continuous lengths up to 30mtrs. Full round non-cutting edges. 201 high grade stainless steel non magnetic.Banding strap now available in a user friendly, colour coded package for easy identification of band width, carry handle and see-through design.

RANGEMM

STAINLESSCODE

RANGEMM

STAINLESSCODE

RANGEMM

STAINLESSCODE

17-19 CSS019 56-59 CSS059 122-130 CSS13020-22 CSS022 60-63 CSS063 131-139 CSS13923-25 CSS025 64-67 CSS067 140-148 CSS14826-28 CSS028 68-73 CSS073 149-161 CSS16129-31 CSS031 74-79 CSS079 162-174 CSS17432-35 CSS035 80-85 CSS085 175-187 CSS18736-39 CSS039 86-91 CSS091 188-200 CSS20040-43 CSS043 92-97 CSS097 201-213 CSS21344-47 CSS047 98-103 CSS103 214-226 CSS22648-51 CSS051 104-112 CSS112 227-239 CSS23952-55 CSS055 113-121 CSS121 240-252 CSS252

Super Clamps

Stainless Steel MaterialBand: Stainless Steel grade AISI 304BOLT: Stainless Steel grade AISI 304

304 Stainless Steel

Clamp FeaturesRolled band edges to prevent hose damage.Easy access hex bolt tightening system.Solid threaded inserts eliminate the need for a nut

For use above water line.

PRODUCT CODE SIZE DESCRIPTION PACKAGE QTYC001 SMALL TOOL 1BAN/J050 ADAPTOR 1

Band-It Tightening ToolPreform Clamp Adaptor

Over 1 tonne tensioning capacity. Suitable for tightening and cutting continuous banding and preformed clamps. Spare parts also available. Adaptor must be attached to tightening tool. For tensioning preformed clamps only.

13

R

14

Band-It Clamping System ProductsBand-It Centre Punch Clamping System

CP series centre punch clamps are available in 201 stainless steel or heat treated galvanised carbon steel. CP clamps are locked with a standard conical punch, ensuring a strong, powerful lock for reliable clamping. Both 201 stainless and galvanised carbon steel centre punch clamps are manufactured with 201 stainless steel buckles to provide maximum locking strength.

PRODUCT CODE I.D. BAND WIDTH PACK/QTYBAN/CP5S 31.7 5/8” 100BAN/CP6S 38.1 5/8” 100BAN/CP8S 50.8 5/8” 100BAN/CP10S 63.5 5/8” 50BAN/CP11S 70.0 5/8” 50BAN/CP12S 76.2 5/8” 50BAN/CP14S 89.0 5/8” 50BAN/CP16S 102.0 5/8” 25BAN/CP20S 127.0 5/8” 25BAN/CPT300 Centre Punch Tool

PRODUCT CODE I.D. BAND WIDTH PACK/QTYBAN/JS236 45 13 100BAN/JS207 51 16 100BAN/JS230 70 13 100BAN/JS211 76 19 50BAN/JS213 102 19 25BAN/JS215 127 19 25

201 high grade stainless steel.Full round non-cutting edges. Double Wrapped.Preformed up to 20 different sizes.

Band-It Clamps Preformed

PRODUCT CODE GAUGE MM WIDTHC253 10 100C254 13 100C255 16 100C256 19 100

Band-It Buckles

201 High Grade Stainless Steel

201 High grade stainless steel. Non magnetic, suitable for single or double wrapped band.

Band-It Ultra LokBand-It Clamping System

PRODUCT CODE I.D. MM PKG.QTY WEIGHT.KG PRODUCT CODE I.D. MM PKG.QTY WEIGHT KGBAN/UL227 50.8 100 6.8 BAN/UL216 152.4 25 3.7BAN/UL210 69.9 50 4.2 BAN/UL217 165.1 25 4.6BAN/UL211 76.2 50 4.4 BAN/UL218 177.8 25 4.8BAN/UL212 88.9 50 4.9 BAN/UL219 203.2 25 5.0BAN/UL213 101.6 25 2.8 BAN/UL228 228.6 10 2.5BAN/UL214 114.3 25 3.0BAN/UL215 127.0 25 3.3BAN/UL270 139.7 25 3.3

BAN/UL00019Ultra-Lok adaptor tool

201 High grade stainless steel.BAN/ULMETMetabo Drill

BAN/UL0019Adaptor Tool

R

Marin

e B

rochure

Poly Strainers

PRODUCT CODE SIZE MM

STP040 40STP050 50STP075 75

Water suction strainersPolypropyleneLight weight strainers for water suction applications.Used in irrigation, fire fighting kits and any general water suction.Perfect for marine industry de-watering and transfer.

Polypropylene

RANGEMM

STAINLESSCODE

RANGEMM

STAINLESSCODE

RANGEMM

STAINLESSCODE

RANGEMM

STAINLESSCODE

9.5-12 CWNS012 22-38 CWNS038 65-90 CWNS090 180-205 CWNS20511-16 CWNS016 30-42 CWNS042 85-110 CWNS110 205-230 CWNS23013-20 CWNS020 35-53 CWNS053 105-130 CWNS130 230-255 CWNS25516-27 CWNS027 40-57 CWNS057 130-155 CWNS155 255-280 CWNS28022-32 CWNS032 52-70 CWNS070 155-185 CWNS185 280-305 CWNS305

Worm Drive Clamps

304 Stainless SteelWorm drive non slotted For industrial, hardware, automotive and general purpose

All Stainless Steel - Non Slotted

Clamp FeaturesRolled edge and smooth underside to prevent hose damage.

For use above water line.

15

PRODUCT CODE SIZE MM DESCRIPTIONFENDER 01 90 X 65 WHITE WITH LIP X 10MTFENDER 01/8 90 X 65 WHITE WITH LIP X 8MTFENDER 02 90 X 65 BLACK WITH LIP X 10MTFENDER 02/8 90 X 65 BLACK WITH LIP X 8MTFENDER 13 60 X 50 60 X 50 H WHITE “D” FENDERFENDER DR110 110 X 95 110 X 95 BLACK DOCKING RUBBERFENDER DR440 50 X 40 50 X 40 BLACK DOCKING RUBBERFENDER DR441 75 X 65 75 X 65 BLACK DOCKING RUBBERFENDER DR442 100 X 80 100 X 80 BLACK DOCKING RUBBERFENDER DR554 105 X 95 105 X 95 BLACK DOCKING RUBBER

Fender/Docking Rubber

Enquire for more information.

90 MM

65 M

M

Totalrubber has a range of fender and docking rubber in various shapes and sizes.

We also stock rubber extrusions, seals, channel rubber, rubber strips and self adhesive sponge strips. Call your nearest dealer for more detailed information on sizes, price, availability and materials.

Cross section samples. Measurements are generally width x height, but this can vary.

W

H

Marin

e B

rochure

Anti-Slip Matting

PRODUCT CODE SIZE MM X LENGTH

SMUB140 1830MM X 10MT

ANTI-SLIP MATTINGNatural RubberMoulded rubber matting with studded bottom allowing moisture to escape. Large drainage holes. Sell 10mt rolls or cut per mtr.Perfect for applications where slip resistance, even surface spread and good drainage are needed.Flat textured surface also allows for maximum grip as well as easy sliding of products when required.

Anti-Slip

16

Also available; Premium Grade Natural Insertion, Neoprene, EPDM, White Natural Rubber, Nitrile (Butadine Acrylonitrile), Food Grade Natural Rubber, Food Grade White (Nitrile), White Translucent Silicone, Red Silicone and Pure Gum.

CODE THICKNESS MM

NUMBER OF PLIES

WIDTH MM

LENGTH MTRS

HARDNESS (SHORE A)

TENSILE STRENGTH BAR

ELONGATION AT BREAK %

TEMPERATURE°C

SINB008 0.8 1 1200 10 60-70 45 350 -30 TO +70SINB016 .16 1 1200 10 60-70 45 350 -30 TO +70SINB032 3.2 1 1200 10 60-70 45 350 -30 TO +70SINB033 3.2 2 1200 10 60-70 45 350 -30 TO +70SINB047 4.7 2 1200 10 60-70 45 350 -30 TO +70SINB064 6.4 2 1200 10 60-70 45 350 -30 TO +70SINB095 9.5 2 1200 10 60-70 45 350 -30 TO +70

Sheet Rubber - Insertion

Natural Insertion Rubber Sheeting. Commonly used for making gaskets for fittings. Handy to have around as it has so many possible uses.

Multi-use and Gaskets

CODE THICKNESS MM

WIDTH MM

LENGTH MTRS

HARDNESS (SHORE A)

TENSILE STRENGTH BAR

ELONGATION AT BREAK %

TEMPERATURE°C

SMHB963 GROUND/MOULDED 9.5 915 1.83 50-60 40 300 -30 TO +70SMHB964 GROUND/MOULDED 9.5 1220 1.83 50-60 40 300 -30 TO +70SMHB984 GROUND/MOULDED 9.5 1220 2.44 50-60 40 300 -30 TO +70

SMHB1263 DELUXE MOULDED 13 3 FT 6 FT 70 +/-SMHB1264 DELUXE MOULDED 13 4 FT 6 FT 70 +/-

Anti Slip Matting

Wet Weather Grip Deluxe Ground

We also stock a range of anti-fatigue matting. Enquire for more information.

Corrosion Information

17

MarineMaterial

Corrosion on materials used in the marine industry can vary depending on a few factors.The material compound of the product.Where the product will physically be used and spend it’s life.What the purpose of the product is, or service it provides.The life expectancy of the product.Expected working temperature and pressure of the product.Maintenance and service level of the product.Salinity of the water, flow of water, water spray, condensation, evaporation and so on.

All of the factors listed will influence the level of resistance a product will have against different forms of corrosion and deterioration.

Some are listed below and all can be found in marine environments.PittingRoughingIntergranular Corrosion (Knifeline Attack)Crevice CorrosionStress Corrosion CrackingSulfide Stress CrackingGalvanic CorrosionContact CorrosionHigh Temp CorrosionMircobial CorrosionBio FoulingMacro FoulingMicro Fouling

There are maintenance procedures, guidelines and standards in the marine industry that must be followed. These are set by governments, insurance companies and industry bodies such as Lloyds, DnV, AS, SAE, ISO, ABS, ANSI, API, ASTM, BSI, DIN, IMO, LR, VTT and NBS.

Correctly choosing a product and material, then performing necessary maintenance, are vital steps in order to get the expected life out of any product that will be used in a marine environment.

(Terms & Conditions) are on pages 19 and 20

18

Totalrubber has arguably Australia’s largest range of Power Transmission products in Australia.

We are the Australian distributor for Contitech V-Belts, Timing Belts, Poly-V (Serpentine) Belts. Contitech belts are standard fitment on some of the world’s most sophisticated premium power-train applications.

Contitech represents the pinacle of German engineering know-how.

We also offer our own Totalrubber branded V-Belt package which has the honour of being the only V-Belt to wear the Australian Standards tick of approval.

This translates to a cost effective product that you can be sure to depend on in all situations.

Power Transmission

Power Transmission Product Range

(Terms & Conditions) are on pages 19 and 20

Wedge Belt3v-5v-8vSPA-SPBSPC-SPZ

Wedge BeltA-B-CD-E-M

ContiMultiflex5/-, 6/Y8/-, 10/Z

Wedge BeltXPA-XPBXPC-XPZ

FRASFire Resistant

Anti StaticA-B-C

Conti UltraflexSPA-SPBSPC-SPZ

Conti Poly VPoly-JPoly-LPoly-M

Open EndedClassicalA-B-C-M

Conti Syncro-drive Timing

BeltXL-L-H

XH-XXH

Classic Cogged Belt

AXBXCX

ContitechVari Speed22-28-3747-55-70

Double SidedClassic Belt

A-B-CD-E-M

Contitech Syncrodrive HTD Timing

Belts 3m-5m-8m-14m

Mower Belts3L-M section4L-A section5L-B sextion

Multi-Banded BeltsClassic - A-B-C

Wedge - 3v-5v-8v

Terms and Conditions of Sale

“TOTALRUBBER” in these Terms and Conditions of Sale is Total Rubber Services (Aust) Pty Ltd ACN 006 156 878 trading as “TOTALRUBBER” of 6-8 Siddons Way, Hallam, Victoria.

ORDERSThe Buyer, by ordering the goods from TOTALRUBBER, acknowledges and agrees: _• that it is expressly contracting with Total Rubber on these Terms and Conditions of Sale; and _• to be bound by these Terms and Conditions of Sale, unless otherwise expressly agreed to in writing by Total Rubber and:_ •these Terms and Conditions of Sale are current as at the date on which they are delivered to the Buyer;_ •TOTALRUBBER may revise these Terms and Conditions of Sale and provide updated Terms and Conditions of Sale to the Buyer; and _ •the Buyer must comply with the revised Terms and Conditions of Sale within 30 days of them being delivered to the Buyer.

TOTALRUBBER will not be bound to supply any goods to the Buyer until TOTALRUBBER raises an invoice in respect of any quote to supply goods.

The minimum order for the Buyer, if located within Australia is $30.00 net value per order or, if located outside Australia, the minimum order is $200.00 net value per order.

PRICING AND PAYMENTUnless otherwise agreed in writing, all sales are made at TOTALRUBBER’s price at the time of delivery, including goods placed on back order which may be subject to price variations between order and delivery.

The price of goods quoted by TOTALRUBBER or on TOTALRUBBER’s price list is exclusive of GST. In addition to the price payable for the goods, the Buyer must pay to TOTALRUBBER, on demand, the GST payable in respect of the supply of those goods. For the purposes of these Terms and Conditions of Sale, “GST” has the same meaning as that word is given in the A New Tax System (Goods and Services Tax) Act 1999 (as amended).

Unless otherwise agreed in writing all prices are strictly net and the Buyer must pay the full purchase price of the goods as set out on TOTALRUBBER’s invoice within 30 days after the month of delivery.

Payment by the Buyer, if located within Australia, may be made by Visa, Mastercard or Bankcard. Payment by the Buyer, if located outside Australia, is to be by one of the following methods – irrevocable letter of credit, telegraphic transfer bank to bank, Visa or Mastercard.Open accounts may be opened by arrangement.

DELIVERYAll shipments are FOB unless special arrangements have been agreed. Consult TOTALRUBBER for details.

Where a delivery date is specified, TOTALRUBBER will use its best endeavours to deliver the goods on the due date. TOTALRUBBER may unilaterally delay or suspend any delivery for any period or cancel any agreement for sale without any liability whatsoever.

The Buyer must notify TOTALRUBBER of any shortages in orders within 3 days of delivery, otherwise the Buyer will be deemed to have accepted the order.

SPECIFICATION CHANGESTOTALRUBBER reserves the right to alter designs and specifications when conditions warrant without notice. For critical applications technical advice should be requested before ordering.

RETURNS AND WARRANTYA 10% handling fee will be levied for goods returned which are incorrectly ordered or surplus to requirement.No goods will be accepted for return without prior notice.No claims or return of goods will be accepted after 7 days from the date of delivery of the goods.All claims, requests for credit, or return of goods must quote the delivery docket number or invoice number that goods were supplied against.No returns will be accepted of cut lengths of hose or goods manufactured specifically for any customer.Freight must be prepaid on all returns.

TOTALRUBBER warrants its products to be free from defects in material and workmanship but, to the extent permitted by law, limits its obligations to replacing goods, which after examination by TOTALRUBBER are deemed to be defective. The Buyer must notify TOTALRUBBER of any defects in goods within 90 days of shipment.

PROPERTY AND RISKProperty in the goods will remain with TOTALRUBBER until TOTALRUBBER has been paid in full for the goods under all individual con-tracts for the supply of the goods between TOTALRUBBER and the Buyer. While the goods remain the property of TOTALRUBBER, the Buyer agrees with TOTALRUBBER that: • the Buyer has no right or claim to any interest in the goods to secure any liquidated or unliquidated debtor obligation TOTALRUBBER owes to the Buyer; • the Buyer cannot claim any lien over the goods; • the Buyer will not create any absolute or defeasible interest in the goods in relation to any third party, except with TOTALRUBBER’s prior written consent; • the Buyer is a bailee of the goods until such time as property in them passes to the Buyer and that this bailment continues in relation to each of the goods until the price of the goods has been paid in full; • pending payment in full for the goods, the Buyer: • must not supply any of the goods to any person outside its ordinary or usual course of business; • must not allow any person to have or acquire any security interest in the goods; • must insure the goods for their full insurable or replacement value (whichever is higher) with an insurer licensed or authorised to conduct the business of insurance in the place where the Buyer carries on business; • must not remove, deface or obliterate any identifying mark or number on any of the goods.

Marin

e B

rochure

19

Despite any other provision of these Terms and Conditions, if the Buyer supplies any of the goods to any person before all the money payable by the Buyer has been paid to TOTALRUBBER (and has not been claimed or clawed-back by any person standing in the place of or representing the Buyer), the Buyer agrees that:• it holds the proceeds of re-supply of the goods on trust for and as agent for TOTALRUBBER immediately when they are receivable or are received;• it must either pay the amount of the proceeds of re-supply to TOTALRUBBER immediately when they are received or pay those proceeds into a bank account as trustee for TOTALRUBBER;• if the Buyer fails to pay for the goods within the period of credit extended by TOTALRUBBER to the Buyer, TOTALRUBBER may recover possession of the goods at any site owned, possessed or controlled by the Buyer and the Buyer agrees that TOTALRUBBER has an irrevocable licence to do so without incurring any liability to the Buyer or any person claiming through the Buyer. • if required, it will assign to TOTALRUBBER any rights to any outstanding money relating to the re-supply of the goods. The Buyer irrevocably appoints TOTALRUBBER or its nominee as its attorney to sign all documents and do all things necessary to assign the debts to TOTALRUBBER under this clause, where the Buyer has failed to do so within 7 days of receiving written notice to do so, and ratifies any acts the attorney lawfully does or causes to be done with respect to any such assignment of debts.

For the purpose of determining which goods have not been paid for, the Buyer will be deemed to have re-supplied the goods on a FIFO basis.

The risk in the goods will transfer to the Buyer on delivery to the Buyer.

LIABILITYTOTALRUBBER will not be liable for any claim, loss or expense whatsoever or howsoever arising which is made after the expiration of 3 days from the date of delivery or the date of the invoice (whichever is later).

TOTALRUBBER will not, to the extent permitted by law, be subject to any liability which exceeds the replacement value of the subject goods. TOTALRUBBER will not be liable for any contingent, consequential or punitive damages arising in any way whatsoever. The Buyer acknowledges this express limitation of liability and agrees to limit any claim accordingly.

TOTALRUBBER will not be liable for any claim, loss or expense sustained or incurred by any person arising in any way as a result of the unavailability of goods, any delay in delivery of the goods or any failure to deliver goods.

Any advice, recommendation, information or representation provided by TOTALRUBBER as to the quality or performance of the goods or their suitability for a particular purpose or otherwise in relation to the goods is given in good faith but without any liability or responsibility on the part of TOTALRUBBER. The Buyer acknowledges that it has not relied upon or been induced by any representation of TOTALRUBBER.

DEFAULTIf the Buyer:• fails to make any payment in accordance with these Terms and Conditions of Sale;• fails to comply with any of these Terms and Conditions of Sale;• being an individual commits any act of bankruptcy, or being a corporation passes a resolution for winding up or liquidation; • enters into any composition or arrangement with creditors or if a receiver including a provisional receiver, or receiver and manager, trustee or administrator is appointed for any property or assets; • has execution levied against it; or• becomes liable to be wound up by reason of insolvency or if any petition is presented for its winding up, then the Buyer will be in default under these Terms and Conditions of Sale and TOTALRUBBER may at its option and without prejudice to any of its rights under these Terms and Conditions of Sale or in law or equity,do one or more of the following:• suspend or terminate any contract;• require the payment of cash before or on delivery of any further goods;• charge default interest on all overdue payments, at the rate of 12% per annum, calculated daily, from the due date for payment until paid in full;• suspend any further deliveries and immediately recover possession of any goods not paid for in full and sell them;• require that all money owing by the Buyer, regardless of the due date, be due and payable; and/or• sue the Buyer for breach of contract.

GENERALNo agent, employee or representative of TOTALRUBBER will have any authority whatsoever to bind TOTALRUBBER to any affirmation, representation, warranty or condition concerning the goods sold under these Terms and Conditions of Sale unless such affirmation, representation, warranty or condition is specifically included in writing within these Terms and Conditions of Sale.

The Buyer agrees that all contracts made with TOTALRUBBER will be deemed to be made in the State of Victoria and the Buyer agrees to submit to the jurisdiction of appropriate court in the State of Victoria.

The provisions of these Terms and Conditions of Sale will be separate and severable from each other to the extent that if any provision or provisions are considered to be inoperative then the remaining provision or provisions will be binding on and enforceable by the parties.

In these Terms and Conditions of Sale, unless the context otherwise requires:• “Buyer” means and includes the Buyer and any servant, agent, partner, contractor or employee of that person;• “TOTALRUBBER” includes all TOTALRUBBER’s employees and agents;• a reference to “including” means “including without limitation”; • any agreement, warranty, representation or obligation which binds or benefits 2 or more persons, binds or benefits those persons jointly and severally; and• “$” or “dollars” is a reference to the lawful currency of Australia.

Terms and Conditions of Sale

Marin

e B

rochure

20

Marine Industry Products

Other Products

Power Transmission

Total Drive Plus Vee BeltsContitech Transmission ProductsJason Torque Plus Mower BeltsJason AcculinkVariable SpeedPoly VeeWedgelink/BrammerConveyor Belt FastenersMulti-Band BeltsPulleys - AluminiumPulleys - TaperlockSkirting RubberTiming BeltsTiming PulleysHTD Timing BeltsCXP Timing Belts

Ducting

DuctaflexDust & Fume ExtractionExtraflexPlasticoatUrethane Ducting

Hose Accessories

Sanitary CouplersCamlock FittingsAir Hose FittingsSuper ClampsTridon Worm Drive ClampsBauer couplingsFlanged HosetailsJamec Airline FittingsPoly Nut & TailsCompressor CouplingsGround Joint CouplersStrainers - BasketsLumpends - Joiners

Tubing

NeopreneNatural RubberP.V.C ClearNylonSiliconeLDPE

Rubber Hose

Water Delivery/SuctionAir Fabric/SteelTwinweld Oxy/AcetaneTwinweld Oxy/LpgVacuum & AirbrakeGreaseproof SteamHot WashSand BlastFire ReelHot AirFuel DispenserWine & Fuel DeliveryMaterial HandlingCar HeaterMulti-PurposeMine DewateringDry CementRadiator Hose

Sheet Rubber

Insertion - NaturalInsertion - NeopreneWhite-Faced InsertionNaturalNeopreneNitrileSiliconeVitonButylWhite Hygienic NaturalWhite Hygienic Nitrile

Issue : TRMARINECAT.08.01 - Effective 01/03/08

P.V.C HOSE

Water - Hot & ColdPotable WaterWaste WaterIrrigationSullage - SludgeSewerageSea WaterAirFood - BeveragePesticide-WeedicidePressure SprayFire ReelAir SeederPetroleum - OilOlive OilMilk - WineAbrasive Materials