Manufacturing Technology Industry
Transcript of Manufacturing Technology Industry
1
Manufacturing
Technology Industry
(Tooling, Metals & Plastics)
Recognition of Prior Learning
(RPL) Clusters
Version 1
2
Functional
Areas
Name of RPL Cluster Corresponding Job Title in
Manufacturing Technology
Industry (Tooling, Metals &
Plastics)
Pages
Sales,
Marketing and
Customers
Management
Sales and Marketing (Tooling Industry) Level 4 Sales / Marketing Engineer (Tooling) 5
Sales and Marketing (Metals Industry ) Level
4
Sales / Marketing Engineer (Metals
Product)
6
Sales and Marketing (Plastics Industry) Level 4 Sales / Marketing Engineer (Plastics
Product)
7
Sales and Marketing Level 3 Marketing Assistant 8
Product
Design and
Development
Product Design and Development (Metal Stamping
and Sheet Metal Processing Industry) (Level 4)
Product Design Engineer (Metal
Stamping and Sheet Metal Product)
9
Product Design and Development (Metal Die Casting
and Foundry Industry) (Level 4)
Product Design Engineer (Metal Die
Casting and Foundry Product)
10
Product Design and Development (Plastics Industry)
(Level 4)
Product Design Engineer (Plastics
Product)
11
Plastic Injection Mould Design and Development
(Level 4)
Injection Mould Design Engineer 12
Sheet Metal Stamping Die Design and Development
(Level 4)
Sheet Metal Stamping Die Design
Engineer
13
Metal Die Casting and Foundry Die Design and
Development (Level 4)
Metal Die Casting and Foundry Die
Design Engineer
14
Project Control (Tooling Industry) (Level 4) Project Engineer (Tooling) 15
Project Control (Metals Industry) (Level 4) Project Engineer (Metals Product) 16
Project Control (Plastics Industry) (Level 4) Project Engineer (Plastics Product) 17
Product Design and Development (Metals Industry)
(Level 3)
Product Design Technician (Metals
Product)
18
Product Design and Development (Plastics Industry)
(Level 3)
Product Design Technician (Plastics
Product)
19
Mould Design and Development (Level
3)
Mould Design Technician 20
Prototype Manufacturing (Metals Industry) (Level 3) Prototype Technician (Metals Products) 21
3
Prototype Manufacturing (Plastics Industry) (Level 3) Prototype Technician (Plastics Products) 22
Process Design
and
Development
Automated Production Line Setting (Tooling Industry)
(Level
4)
Automation Planner (Tooling) 23
Automated Production Line Setting (Plastics Industry)
(Level 4)
Production &Industrial Engineer
(Plastics Product)
24
Automated Production Line Setting (Metal Stamping
and Sheet Metal Processing Industry) (Level 4)
Production &Industrial Engineer (Metal
Stamping and Sheet Metal Product)
25
Automated Production Line Setting (Metal Die
Casting , Foundry and Metal Extrusion Industry)
(Level 4)
Production &Industrial Engineer (Metal
Die Casting, Foundry and Metal
Extrusion Product)
26
Automation Engineering (Level 4) Automation Engineer 27
Production Line Setting (Level 3) Production Technician / Assistant
Engineer
28
Procurement,
Logistics
Planning and
Control
Procurement and Supplier Management (Tooling
Industry) (Level 4)
Procurement Supervisor (Tooling) 29
Procurement and Supplier Management (Metals
Industry) (Level 4)
Procurement Supervisor (Metals
Product)
30
Procurement and Supplier Management (Plastics
Industry) (Level 4)
Procurement Supervisor (Plastics
Product)
31
Procurement (Tooling Industry) (Level 3) Buyer (Tooling) 32
Procurement (Metals Industry) (Level 3) Buyer (Metals Product) 33
Procurement (Plastics Industry) (Level 3) Buyer (Plastics Product) 34
Product
Manufacturing
Production Management (Level 4) Workshop Supervisor 35
Production (Metal Stamping and Sheet Metal
Processing Industry) (Level 4)
Technologist (Metal Stamping and Sheet
Metal Product)
36
Production (Metal Die Casting and Foundry Industry)
(Level 4)
Technologist (Metal Die Casting and
Foundry Product)
37
Production (Metal Extrusion Industry) (Level 4) Technologist ( Metal Extrusion Product) 38
Production (Plastics Industry) (Level 4) Technologist (Plastics Product) 39
Mould Manufacturing (Milling and EDM Categories)
(Level 4)
Technologist (Milling and EDM) 40
Mould Manufacturing (Milling and Grinding
Categories) (Level 4)
Technologist (Milling and Grinding) 41
4
Mould Manufacturing (Milling and Benchwork
Categories) (Level 4)
Technologist (Milling and Benchwork) 42
Mould Manufacturing (Turning and EDM
Categories) (Level 4)
Technologist (Turning and EDM) 43
Mould Manufacturing (Turning and Grinding
Categories) (Level 4)
Technologist (Turning and Grinding) 44
Mould Manufacturing (Turning and Benchwork
Categories) (Level 4)
Technologist (Turning and Benchwork) 45
Mould Manufacturing (Benchwork and Grinding
Categories) (Level 4)
Technologist (Benchwork and Grinding) 46
Mould Manufacturing (Benchwork and EDM
Categories) (Level 4)
Technologist (Benchwork and EDM) 47
Production (Metal Stamping and Sheet Metal
processing Industry) (Level 3)
Technician (Metal Stamping and Sheet
Metal Product)
48
Production (Metal Die Casting and Foundry Industry)
(Level 3)
Technician (Metal Die Casting and
Foundry Product)
49
Mould Manufacturing (Milling Category) (Level 3) Technician (Milling) 50
Mould Manufacturing (Grinding Category) (Level 3) Technician (Grinding) 51
Mould Manufacturing (Benchwork Category) (Level
3)
Technician (Benchwork) 52
Mould Manufacturing (Turning Category) (Level 3) Technician (Turning) 53
Mould Manufacturing (EDM Category) (Level 3) Technician (EDM) 54
Production (Plastics Industry) (Level 3) Technician (Plastics Product) 55
Production (Metal Stamping and Sheet Metal
Processing Industry) (Level 2)
Operator (Metal Stamping and Sheet
Metal Product)
56
Production (Metal Die Casting and Foundry Industry)
(Level 2)
Operator (Metal Die Casting and
Foundry Product)
57
Production (Metal Extrusion Industry ) (Level 2) Operator (Metal Extrusion Product) 58
Production (Level 1) Support Worker 59
Product
Quality
Control and
Testing
Quality Control (Metals Industry) (Level 4) Quality Engineer (Metals Product) 60
Quality Control (Plastics Industry) (Level 4)
Quality Engineer (Plastics Product) 61
Quality Control (Tooling Industry) (Level 4) Quality Engineer (Tooling) 62
Quality Management (Level 4) Quality Engineer (Management System) 63
Quality Control (Level 3) Quality Technician 64
5
Functional Areas: Sales, Marketing and Customers Management
Name of RPL Cluster:Sales and Marketing (Tooling Industry) (Level 4)
Basic core
competencies:
Implement all kinds of market exploration plan, carry out market
research, as well as customer relationship management.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in Sales, Marketing and
Customers Management functional area for four years, including
sales & marketing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106462L4 Carry out market research 3
106464L4 Implement market exploration plan 3
106466L4 Carry out customer relationship management 3
106487L4 Know tool manufacturing process, and
communicate with customers and internal
departments
3
12
6
Name of RPL Cluster:Sales and Marketing (Metals Industry) (Level 4)
Basic core
competencies:
Implement all kinds of market exploration plan, carry out market
research, as well as customer relationship management.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in Sales, Marketing and
Customers Management functional area for four years, including
sales & marketing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106462L4 Carry out market research 3
106465L4 Implement market exploration plan 3
106466L4 Carry out customer relationship management 3
106491L4 Know metal products manufacturing process, and
communicate with customers and internal
departments
3
12
7
Name of RPL Cluster:Sales and Marketing (Plastics Industry) (Level 4)
Basic core
competencies:
Implement all kinds of market exploration plan, carry out market
research, as well as customer relationship management.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in Sales, Marketing and
Customers Management functional area for four years, including
sales & marketing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106462L4 Carry out market research 3
106465L4 Implement market exploration plan 3
106466L4 Carry out customer relationship management 3
106493L4 Know plastic products process, and communicate
with customers and internal departments
3
12
8
Name of RPL Cluster:Sales and Marketing (Level 3)
Basic core
competencies:
Implement targeted market research plan, collect valuable and precise
market information, as well as carry out customer exploration and
relationships holding.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in Sales,
Marketing and Customers Management functional area for three
years, including sales & marketing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106371L2 Implement targeted market research plan 3
106386L3 Customer exploration and relationships
holding 3
106383L3 Apply basic environmental standards and
regulations on relevant products 3
9
9
Functional Areas: Product Design and Development
Name of RPL Cluster: Product Design and Development (Metal Stamping and Sheet
Metal Processing Industry) (Level 4)
Basic core
competencies:
Carry out all kinds of metal stamping and sheet metal products
design, and compile product manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product design
and development functional area in metal stamping and sheet metal
processing industry for four years, including computer aided
drawing, design and simulation working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106474L4 Metal stamping part design for production,
assembly, dismantling and surface decoration 6
106480L4 Compile product manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation and
design configuration 6
21
10
Name of RPL Cluster: Product Design and Development (Metal Die Casting and
Foundry Industry) (Level 4)
Basic core
competencies:
Carry out all kinds of metal die casting and foundry products design,
and compile product manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product design
and development functional area in metal die casting and foundry
industry for four years, including computer aided drawing,
design and simulation working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106473L4 Rapid tooling design and manufacture
of metal products
3
106475L4 Metal die casting and foundry part design for
production, assembly, dismantling and
surface decoration
6
106480L4 Compile product manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation and
design configuration 6
24
11
Name of RPL Cluster: Product Design and Development (Plastics Industry) (Level 4)
Basic core
competencies:
Carry out all kinds of plastic products design, and compile product
manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in product design and
development functional area in plastic industry for four years,
including computer aided drawing, design and simulation working
experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106477L4 Rapid tooling design and manufacture of
plastic products
6
106478L4 Plastic parts design for production,
assembling, dismantling, and surface
treatment
6
106480L4 Compile product manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation and
design configuration 6
27
12
Name of RPL Cluster: Plastic Injection Mould Design and Development (Level 4)
Basic core
competencies:
Carry out all kinds of plastic injection mould functional
design, and compile tooling manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould design
and development functional area for four years, including
computer aided drawing, design and simulation working
experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106571L5 Plastic injection mould functional
design
9
106472L4 Compile tooling manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation
and
design configuration
6
24
13
Name of RPL Cluster: Sheet Metal Stamping Die Design and Development (Level 4)
Basic core
competencies:
Carry out all kinds of sheet metal stamping die functional
design, and compile tooling manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould design
and development functional area for four years, including
computer aided drawing, design and simulation working
experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106468L4 Sheet metal stamping single die and
compound die functional design
6
106469L4 Progressive and transfer sheet metal
stamping die functional design
6
106472L4 Compile tooling manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation
and design configuration 6
27
14
Name of RPL Cluster: Metal Die Casting and Foundry Die Design and Development
(Level 4)
Basic core
competencies:
Carry out all kinds of metal die casting and foundry die
functional design, and compile tooling manual.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould design
and development functional area for four years, including
computer aided drawing, design and simulation working
experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106471L4 Metal die casting and foundry die functional
design
6
106472L4 Compile tooling manual 3
106482L4 Carry out product computer aided industrial
design and outlook simulation
6
106485L4 Management of product concept creation
and design configuration 6
21
15
Name of RPL Cluster: Project Control (Tooling Industry) (Level 4)
Basic core
competencies:
Control the overall project progress, supervise and co-ordinate
prototype manufacturing.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in mould design and
development functional area for four years, including project control
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106484L4 Formulate product development project
schedule and monitor project progress
3
106483L4 Supervise and co-ordinate prototype
manufacturing
3
106486L4 Estimate and control of product development
and manufacturing cost
6
106487L4 Know tool manufacturing process, and
communicate with customers and internal
departments
3
15
16
Name of RPL Cluster: Project Control (Metals Industry) (Level 4)
Basic core
competencies:
Control the overall project progress, supervise and co-ordinate
prototype manufacturing.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in metals product design and
development functional area for four years, including project control
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106484L4 Formulate product development project
schedule and monitor project progress
3
106483L4 Supervise and co-ordinate prototype
manufacturing
3
106486L4 Estimate and control of product development
and manufacturing cost
6
106491L4 Know metal products manufacturing process,
and communicate with customers and
internal departments
3
15
17
Name of RPL Cluster: Project Control (Plastics Industry) (Level 4)
Basic core
competencies:
Control the overall project progress, supervise and co-ordinate
prototype manufacturing.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in plastics product design and
development functional area for four years, including project control
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106484L4 Formulate product development project
schedule and monitor project progress
3
106483L4 Supervise and co-ordinate prototype
manufacturing
3
106486L4 Estimate and control of product development
and manufacturing cost
6
106493L4 Know plastic products process, and
communicate with customers and internal
departments
3
15
18
Name of RPL Cluster: Product Design and Development (Metals Industry) (Level 3)
Basic core
competencies:
Carry out 2D computer aided drawing, 3D surface & solid modeling
and parametric design.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metals product
design and development functional area for three years, including
computer aided drawing, design and simulation working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106390L3 Product drawings and geometric
dimensioning & tolerancing
3
106391L3 2D computer aided drawing, 3D surface &
solid modeling and parametric design 6
106387L3 2D and 3D modeling and reverse
engineering of metal products
3
12
19
Name of RPL Cluster: Product Design and Development (Plastics Industry) (Level 3)
Basic core
competencies:
Carry out 2D computer aided drawing, 3D surface & solid modeling
and parametric design.
Years of service and
relevant working
experience::
Five years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in plastics product design and
development functional area for three years, including computer aided
drawing, design and simulation working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106390L3 Product drawings and geometric
dimensioning & tolerancing
3
106391L3 2D computer aided drawing, 3D surface &
solid modeling and parametric design 6
106389L3 3D modeling and reverse engineering of
plastic products
6
15
20
Name of RPL Cluster: Mould Design and Development (Level 3)
Basic core
competencies:
Carry out 2D computer aided drawing, 3D surface & solid modeling
and parametric design.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould design
and development functional area for three years, including
computer aided drawing, design and simulation working
experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106390L3 Product drawings and geometric
dimensioning & tolerancing
3
106391L3 2D computer aided drawing, 3D surface &
solid modeling and parametric design
6
9
21
Name of RPL Cluster: Prototype Manufacturing (Metals Industry) (Level
3)
Basic core
competencies:
Carry out prototype manufacturing and related secondary
processing base on drawing.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metals product
design and development functional area for three years, including
prototype manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106392L3 Manufacture prototypes with rapid
prototyping technologies 6
106393L3 Arrange prototype testing according to
product requirements 3
106388L3 Surface treatment and heat treatment of
metal product prototypes
3
12
22
Name of RPL Cluster: Prototype Manufacturing (Plastics Industry) (Level
3)
Basic core
competencies:
Carry out prototype manufacturing and related secondary
processing base on drawing.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in plastics product
design and development functional area for three years, including
prototype manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106392L3 Manufacture prototypes with rapid
prototyping technologies 6
106393L3 Arrange prototype testing according to
product requirements 3
106372L2 Surface finishing of plastic product
prototypes
3
12
23
Functional Areas: Process Design and Development
Name of RPL Cluster: Automated Production Line Setting (Tooling Industry)
(Level 4)
Basic core
competencies:
Base on business needs to select different machinery equipment and
auxiliary equipment, develop lean and flexible manufacturing
process, layout and facilities.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould process
design and development functional area for four years, including
automated production line setting working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106494L4 Select machinery equipment and auxiliary
equipment in need, and understand their
structure, types, control, functions and
applications
3
106495L4 Select quality monitoring and assurance
equipment in need for different products
3
106496L4 Compile preventive maintenance plan and
operation regulations for all kinds of
machines and auxiliary equipment, and
monitor the operation
6
106500L4 Develop lean and flexible manufacturing
process, layout and facilities 6
18
24
Name of RPL Cluster: Automated Production Line Setting (Plastics Industry)
(Level 4)
Basic core
competencies:
Base on business needs to select different machinery equipment and
auxiliary equipment, develop lean and flexible manufacturing
process, layout and facilities.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in plastic process
design and development functional area for four years, including
automated production line setting working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106492L4 Develop and define automatic processing
and testing procedures, methodologies and
equipment for plastic products
6
106494L4 Select machinery equipment and auxilary
equipment in need, and understand their
structure, types, control, functions and
applications
3
106495L4 Select quality monitoring and assurance
equipment in need for different products
3
106496L4 Compile preventive maintenance plan and
operation regulations for all kinds of
machines and auxiliary equipment, and
monitor the operation
6
106500L4 Develop lean and flexible manufacturing
process, layout and facilities 6
24
25
Name of RPL Cluster: Automated Production Line Setting (Metal Stamping and
Sheet Metal Processing Industry) (Level 4)
Basic core
competencies:
Base on business needs to select different machinery equipment and
auxiliary equipment, develop lean and flexible manufacturing
process, layout and facilities.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal stamping
and sheet metal process design and development functional area
for four years, including automated production line setting
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106488L4 Develop and define automatic processing
and testing procedures, methodologies and
equipment for stamping products
6
106494L4 Select machinery equipment and auxilary
equipment in need, and understand their
structure, types, control, functions and
applications
3
106495L4 Select quality monitoring and assurance
equipment in need for different products
3
106496L4 Compile preventive maintenance plan and
operation regulations for all kinds of
machines and auxiliary equipment, and
monitor the operation
6
106500L4 Develop lean and flexible manufacturing
process, layout and facilities 6
24
26
Name of RPL Cluster: Automated Production Line Setting (Metal Die Casting ,
Foundry and Metal Extrusion Industry) (Level 4)
Basic core
competencies:
Base on business needs to select different machinery equipment and
auxiliary equipment, develop lean and flexible manufacturing
process, layout and facilities.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in metal die casting, foundry
and metal extrusion process design and development functional area
for four years, including automated production line setting working
experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106490L4 Develop and define automatic processing and
testing procedures, methodologies and
equipment for metal die casting, extrusion
and foundry product
6
106494L4 Select machinery equipment and auxiliary
equipment in need, and understand their
structure, types, control, functions and
applications
3
106495L4 Select quality monitoring and assurance
equipment in need for different products
3
106496L4 Compile preventive maintenance plan and
operation regulations for all kinds of
machines and auxiliary equipment, and
monitor the operation
6
106500L4 Develop lean and flexible manufacturing
process, layout and facilities 6
24
27
Name of RPL Cluster: Automation Engineering (Level 4)
Basic core
competencies:
Apply all kinds of devices and equipment to develop
automation system.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in process design
and development functional area for four years, including
automated production line setting working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106497L4 Apply pneumatic, hydraulic and
electric devices to develop automation
system
6
106498L4 Apply Program Logic Controller (PLC) to
compile electronic control program
6
106499L4 Apply multi-axis robots to develop
automation system
6
18
28
Name of RPL Cluster: Production Line Setting (Level 3)
Basic core
competencies:
Install, commissioning and carry out preventive maintenance of all
kinds of manufacturing machinery and auxiliary equipment in
company.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in process design and
development functional area for three years, including production
line setting working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106395L3 Installation, commissioning and preventive
maintenance of all kinds of manufacturing
machinery and auxiliary equipment
6
106396L3 Installation and application of jigs and
fixtures 3
106385L3 Apply legislations and measures of
occupational safety, health and
environmental protection
3
12
29
Functional Areas: Procurement, Logistics Planning and Control
Name of RPL Cluster: Procurement and Supplier Management (Tooling Industry)
(Level 4)
Basic core
competencies:
Screen and select appropriate supplier of production machinery,
inspection equipment, production materials, as well as build
relationship with supplier.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in tooling industry
for four years, including procurement and supplier management
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106502L4 Screen and select supplier 3
106503L4 Build relationship with supplier 3
106441L3 Apply foundation knowledge of mould and
tooling steels
3
9
30
Name of RPL Cluster: Procurement and Supplier Management (Metals Industry)
(Level 4)
Basic core
competencies:
Screen and select appropriate supplier of production machinery,
inspection equipment, production materials, as well as build
relationship with supplier.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in metals industry
for four years, including procurement and supplier management
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106502L4 Screen and select supplier 3
106503L4 Build relationship with supplier 3
106439L3 Apply foundation knowledge of metallic
materials
3
9
31
Name of RPL Cluster: Procurement and Supplier Management (Plastics Industry)
(Level 4)
Basic core
competencies:
Screen and select appropriate supplier of production machinery,
inspection equipment, production materials, as well as build
relationship with supplier.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in plastics industry
for four years, including procurement and supplier management
working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106502L4 Screen and select supplier 3
106503L4 Build relationship with supplier 3
106440L3 Apply foundation knowledge of plastic
materials 3
9
32
Name of RPL Cluster: Procurement (Tooling Industry) (Level 3)
Basic core
competencies:
Implement routine procurement coordination work, such as carry out
and monitoring of procurement.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in tooling industry
for three years, including procurement working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106398L3 Carry out and monitor procurement 3
106441L3 Apply foundation knowledge of mould and
tooling steels
3
6
33
Name of RPL Cluster: Procurement (Metals Industry) (Level 3)
Basic core
competencies:
Implement routine procurement coordination work, such as carry out
and monitoring of procurement.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in metals industry
for three years, including procurement working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106398L3 Carry out and monitor procurement 3
106439L3 Apply foundation knowledge of metallic
materials
3
6
34
Name of RPL Cluster: Procurement (Plastics Industry) (Level 3)
Basic core
competencies:
Implement routine procurement coordination work, such as carry out
and monitoring of procurement.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in procurement,
logistics planning and control functional area in plastics industry
for three years, including procurement working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106398L3 Carry out and monitor procurement 3
106440L3 Apply foundation knowledge of plastic
materials
3
6
35
Functional Areas: Product Manufacturing
Name of RPL Cluster: Production Management (Level 4)
Basic core
competencies:
(1) Carry out workshop management, supervise the production
progress and the status of production equipment.
(2) Production line balancing and adjustment, arrange the layout of
equipment and ancillary equipment legitimately.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product
manufacturing functional area for four years, including production
management working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106384L3 Supervise Production 3
106397L3 Production planning 3
106461L4 Implement occupational safety and health
evaluation
3
106501L4 Line balancing 6
106454L4 Establishment and preventive maintenance of
equipment / tools management system
6
21
36
Name of RPL Cluster: Production (Metal Stamping and Sheet Metal Processing
Industry (Level 4)
Basic core
competencies:
Carry out intermediate metal stamping and sheet metal processing.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal stamping
and sheet metal product manufacturing functional area for four
years, including production working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106516L4 Non-conventional and special processing of
sheet metal
3
106517L4 Stamping of new sheet metal and alloy
materials
3
106520L4 Heat treatment and surface texturing of
metals 3
106439L3 Apply foundation knowledge of metallic
materials
3
12
37
Name of RPL Cluster:Production (Metal Die Casting and Foundry Industry) (Level
4)
Basic core
competencies:
Independently set parameters, operate machine for die casting and
foundry production, and carry out simple maintenance.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal die
casting and foundry product manufacturing functional area for
four years, including production working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106518L4 Equipment setting, carry out die casting and
foundry production, and problems solving 6
106439L3 Apply foundation knowledge of metallic
materials
3
106520L4 Heat treatment and surface texturing of
metals 3
12
38
Name of RPL Cluster:Production (Metal Extrusion Industry) (Level 4)
Basic core
competencies:
Independently set parameters, operate machine for metal extrusion
production, and carry out simple maintenance.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal extrusion
product manufacturing functional area for four years, including
production working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106519L4 Equipment setting, carry out metal extrusion
production, and problems solving
3
106439L3 Apply foundation knowledge of metallic
materials
3
106520L4 Heat treatment and surface texturing of
metals 3
9
39
Name of RPL Cluster: Production (Plastics Industry) (Level 4)
Basic core
competencies:
Independently set parameters, operate machine for all kinds of new
plastics materials and composite forming, and carry out simple
maintenance.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in plastics
product manufacturing functional area for four years, including
production working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106523L4 Carry out advanced plastic forming 6
106524L4 Carry out plastic recycling 9
106525L4 Carry out plastic functional modification 9
106526L4 Carry out new plastic materials and
composite forming 6
30
Name of RPL Cluster: Mould Manufacturing (Milling and EDM Categories) (Level 4)
40
Basic core
competencies:
Carry out intermediate milling processing and electrical discharge
machining.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106509L4 Intermediate computer numerical control
(CNC) precision milling (Milling
Category)
6
106511L4 Intermediate electrical discharge
machining (EDM Category)
6
106512L4 Wire electrical discharge machining
(EDM Category)
6
18
41
Name of RPL Cluster: Mould Manufacturing (Milling and Grinding Categories )
(Level 4)
Basic core
competencies:
Carry out intermediate milling and grinding process.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106509L4 Intermediate computer numerical control
(CNC) precision milling (Milling
Category)
6
106513L4 Profile grinding (Grinding Category) 6
106514L4 Jig grind and jig bore (Grinding
Category) 6
18
42
Name of RPL Cluster: Mould Manufacturing (Milling and Benchwork Categories)
(Level 4)
Basic core
competencies:
Carry out intermediate milling processing and benchwork.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106509L4 Intermediate computer numerical control
(CNC) precision milling (Milling
Category)
6
106515L4 Mould fitting and adjustment
(Benchwork Category) 6
12
43
Name of RPL Cluster: Mould Manufacturing (Turning and EDM Categories) (Level 4)
Basic core
competencies:
Carry out intermediate turning processing and electrical discharge
machining.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106510L4 Intermediate computer numerical control
(CNC) precision turning (Turning
Category)
6
106511L4 Intermediate electrical discharge
machining (EDM Category)
6
106512L4 Wire electrical discharge machining
(EDM Category) 6
18
44
Name of RPL Cluster: Mould Manufacturing (Turning and Benchwork Categories)
(Level 4)
Basic core
competencies:
Carry out intermediate turning and grinding process.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106510L4 Intermediate computer numerical control
(CNC) precision turning (Turning
Category)
6
106513L4 Profile grinding (Grinding Category) 6
106514L4 Jig grind and jig bore (Grinding
Category) 6
18
45
Name of RPL Cluster: Mould Manufacturing (Turning and Benchwork Categories)
(Level 4)
Basic core
competencies:
Carry out intermediate turning process and benchwork.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106510L4 Intermediate computer numerical control
(CNC) precision turning (Turning
Category)
6
106515L4 Mould fitting and adjustment
(Benchwork Category)
6
12
46
Name of RPL Cluster: Mould Manufacturing (Benchwork and Grinding Categories)
(Level 4)
Basic core
competencies:
Carry out intermediate benchwork and grinding process.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credi
t
Unit of Competencies
(UoCs)
106515L4 Mould fitting and adjustment
(Benchwork Category)
6
106513L4 Profile grinding (Grinding Category) 6
106514L4 Jig grind and jig bore (Grinding
Category) 6
18
47
Name of RPL Cluster: Mould Manufacturing (Benchwork and EDM Categories) (Level
4)
Basic core
competencies:
Carry out intermediate benchwork and electrical discharge
machining.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for four years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of Competencies
(UoCs)
106515L4 Mould fitting and adjustment
(Benchwork Category)
6
106511L4 Intermediate electrical discharge
machining (EDM Category)
6
106512L4 Wire electrical discharge machining
(EDM Category) 6
18
48
Name of RPL Cluster: Production (Metal Stamping and Sheet Metal processing
Industry) (Level 3)
Basic core
competencies:
Set parameters, operate machine for metal stamping and sheet
metal processing, and carry out simple maintenance.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal stamping
and sheet metal product manufacturing functional area for three
years, including product manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106415L3 Adjust stamping equipment, carry out all
kinds of metal stamping processing and
resolve production problems
3
106416L3 Metal tube and wire forming 3
106417L3 Sheet metal progressive and transfer
stamping 3
106439L3 Apply foundation knowledge of metallic
materials
3
106418L3 Secondary processing on metal stamping
and sheet metal parts 3
106420L3 Mechanical surface finishing 3
106424L3 Marking processing 3
21
49
Name of RPL Cluster: Production (Metal Die Casting and Foundry Industry)
(Level 3)
Basic core
competencies:
Set parameters, operate machine for secondary processing on die
casting and foundry parts, and carry out simple maintenance.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal die casting
and foundry product manufacturing functional area for three years,
including product manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106419L3 Secondary processing on die casting and
foundry parts 3
106420L3 Mechanical surface finishing 3
106424L3 Marking processing 3
9
50
Name of RPL Cluster: Mould Manufacturing (Milling Category) (Level 3)
Basic core
competencies:
Carry out foundational milling process.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for three years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106402L3 Fundamental computer numerical
control (CNC) milling 3
106408L3 Manual mechanical milling 6
106410L3 Benchwork 6
106404L3 Drilling and tapping 3
106441L3 Apply foundation knowledge of mould
and tooling steels
3
21
51
「Name of RPL Cluster: Mould Manufacturing (Grinding Category) (Level 3)
Basic core
competencies:
Carry out foundational grinding process.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for three years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106406L3 Surface grinding 6
106407L3 Internal and external cylindrical
grinding, centerless grinding and centre
hole grinding
6
106410L3 Benchwork 6
106404L3 Drilling and tapping 3
106441L3 Apply foundation knowledge of mould
and tooling steels
3
24
52
Name of RPL Cluster: Mould Manufacturing (Benchwork Category) (Level 3)
Basic core
competencies:
Carry out foundational benchwork.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for three years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106410L3 Benchwork 6
106404L3 Drilling and tapping 3
106412L3 Preventive maintenance of tooling 3
106411L3 Mould polishing 6
106441L3 Apply foundation knowledge of mould
and tooling steels
3
21
53
Name of RPL Cluster: Mould Manufacturing (Turning Category) (Level 3)
Basic core
competencies:
Carry out foundational turning process.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for three years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106403L3 Foundation computer numerical control
(CNC) turning 3
106409L3 Manual mechanical turning 6
106410L3 Benchwork 6
106404L3 Drilling and tapping 3
106441L3 Apply foundation knowledge of mould
and tooling steels
3
21
54
Name of RPL Cluster: Mould Manufacturing (EDM Category) (Level 3)
Basic core
competencies:
Carry out foundational electrical discharge machining.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in mould
manufacturing functional area for three years, including mould
manufacturing working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106405L3 Electrical discharge machining 3
106410L3 Benchwork 6
106404L3 Drilling and tapping 3
106441L3 Apply foundation knowledge of mould
and tooling steels
3
15
55
Name of RPL Cluster: Production (Plastics Industry) (Level 3)
Basic core
competencies:
Set parameters, operate machine for traditional plastic injection
moulding and plastic moulding, and carry out simple maintenance.
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in plastics product
manufacturing functional area for three years, including product
manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106426L3 Set parameters, implement traditional plastic
injection moulding and resolve production
problems
6
106427L3 Set parameters, implement traditional plastic
moulding and resolve production problems 6
106430L3 Pre/ post processing of plastic materials and
products 6
106440L3 Apply foundation knowledge of plastic
materials
3
21
56
Name of RPL Cluster: Production (Metal Stamping and Sheet Metal Processing
Industry) (Level 2)
Basic core
competencies:
Operate equipment for production, and carry out simple
Maintenance.
Years of service and
relevant working
experience:
Three years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal stamping
and sheet metal product manufacturing functional area for two
years, including product manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106375L2 Operate metal stamping equipment for
production 3
3
57
Name of RPL Cluster: Production (Metal Die Casting and Foundry Industry)
(Level 2)
Basic core
competencies:
Operate equipment for production, and carry out simple
maintenance.
Years of service and
relevant working
experience:
Three years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal die
casting and foundry product manufacturing functional area for
two years, including product manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106376L2 Operate die casting and foundry equipment
for production
3
3
58
Name of RPL Cluster: Production (Metal Extrusion Industry ) (Level 2)
Basic core
competencies:
Operate equipment for production, and carry out simple
Maintenance.
Years of service and
relevant working
experience:
Three years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in metal
extrusion product manufacturing functional area for two years,
including product manufacturing working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106377L2 Operate metal extrusion equipment for
production 3
3
59
Name of RPL Cluster: Production (Level 1)
Basic core
competencies:
Know all kinds of common basic machinery and hand tools, and
carry out production support.
Years of service and
relevant working
experience:
One year working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics).
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106368L1 Know the usage of all kinds of common
basic hand tools 3
106369L1 Production support 3
6
60
Functional Areas: Product Quality Control and Testing
Name of RPL Cluster: Quality Control (Metals Industry) (Level 4)
Basic core
competencies:
Base on all kinds of testing standard, carry out related quality
analysis, control and improvement of the metal product.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology Industry
(Tooling, Metals & Plastics), of which in product quality control and
testing functional area in metals industry for four years, including
quality control working experience.
Code of UoC Name of UoC Credit
Unit of
Competencies
(UoCs)
106529L4 Identification and analyze of metal materials 3
106530L4 Metal parts surface defects analysis 3
106531L4 Monitor and standardize the measurement
methods of various geometric dimensions
and tolerance
6
106532L4 Apply all kinds of testing standards, select
and arrange all kinds of tests which meet the
requirements of products, and analyze quality
assurance reports
9
106536L4 Formulate product sampling plan and
statistical process control methods
(SPC)
6
27
61
Name of RPL Cluster: Quality Control (Plastics Industry) (Level 4)
Basic core
competencies:
Base on all kinds of testing standard, carry out related quality
analysis, control and improvement of the plastic product.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product quality
control and testing functional area in plastics industry for four
years, including quality control working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106444L3 Carry out quality inspection and
evaluation of plastic parts
3
106531L4 Monitor and standardize the measurement
methods of various geometric dimensions
and tolerance
6
106532L4 Apply all kinds of testing standards, select
and arrange all kinds of tests which meet the
requirements of products, and analyze
quality assurance reports
9
106536L4 Formulate product sampling plan and
statistical process control methods
(SPC)
6
24
62
Name of RPL Cluster: Quality Control (Tooling Industry) (Level 4)
Basic core
competencies:
Base on all kinds of testing standard, carry out related quality
analysis, control and improvement of the mould.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product quality
control and testing functional area in tooling industry for four
years, including quality control working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106527L4 Mould assembly, internal and external
surface quality inspection 6
106528L4 Mould testing 6
106531L4 Monitor and standardize the measurement
methods of various geometric dimensions
and tolerance
6
106532L4 Apply all kinds of testing standards, select
and arrange all kinds of tests which meet the
requirements of products, and analyze
quality assurance reports
9
106536L4 Formulate product sampling plan and
statistical process control methods
(SPC)
6
33
63
Name of RPL Cluster: Quality Management (Level 4)
Basic core
competencies:
Manage the quality assurance procedure, measuring instruments
and equipment, and operators of the enterprise.
Years of service and
relevant working
experience:
Six years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product quality
control and testing functional area for four years, including
quality management working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106534L4 Define guidelines in usage of measuring
instruments and equipment, and operators
management
3
106535L4 Compile and maintain quality assurance
procedures
6
106533L4 Select and define measuring instruments
and equipment needed
3
106537L4 Plan and carry out quality management
audit
6
18
64
Name of RPL Cluster: Quality Control (Level 3)
Basic core
competencies:
Carry out all kinds of inspection base on the requirement, as well as
calibration and preventive maintenance of measurement
instruments and equipment .
Years of service and
relevant working
experience:
Five years working experience in Manufacturing Technology
Industry (Tooling, Metals & Plastics), of which in product quality
control and testing functional area for three years, including
quality control working experience.
Code of
UoC
Name of UoC Credit
Unit of
Competencies
(UoCs)
106445L3 Manual and automatic geometric dimension
measurement
6
106446L3 Carry out product testing 6
106447L3 Calibration and preventive
maintenance of measurement
instruments and equipment
6
18