Manufactured Garment & Printing Tolerances of print.pdf · 2019. 9. 26. · garment so we have come...
1
STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM Logo printed here Logo printed here Logo printed here Logo printed here Logo printed here Logo printed here Logo printed here This print position will be generally centered in the panel with a position tolerance from either side+ or - 1.5cm and a position tolerance from bottom of + or - 3cm This print position will be aligned with the top stripe Tolerance of position alignment from top stripe + or - 1.5cm Tolerance of level of print to top stripe + or - 1cm This print position will be aligned with the bottom hem Tolerance of position alignment from hem + or - 1.5cm Tolerance of level of print to hem + or - 1cm ----------- ----------- ----------- ----------- ----------- ----------- ----------- ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ STEWARD TEAM ------------ ------------ STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM STEWARD TEAM ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ ------------ Acceptable unacceptable Acceptable unacceptable Garment manufacturing tolerances unacceptable Print aligned to top stripe Print aligned centre within tolerances If the bottom stripe not stitched 100% horizontal it may make print appear uneven but if print is aligned to top stripe to agreed tolerances = acceptable. if the bottom stripe is out by more than 1.5cm, this is unacceptable but our staff will check before printing that any like this are taken out.. stitched stripe position tolerance of +or minus 1cm = acceptable stitched stripe position tolerance of +or minus 1cm = acceptable = perfect stripe position As the garments are not all manufactured equal, tolerances for printing like below are acceptable A perfect print below Print not aligned within tolerance to stripes This page will give you info on our allowed print tolerances. textile printing is unlike paper or solid substrate printing, in that no 2 garments are made identical as they are made by hand and sewing machines. This results in differences in the position of some items, e.g. stripes/pockets/badges/hems etc. For this reason, It is impossible to make a screenprint sit identical on every garment so we have come up with a guide of what you can expect when screenprinting bulk qty items such as hi vis vests, or tee shirts etc. OF COURSE, our operators do their best and will remove any items deemed outside of normal tolerances before printing or despatch, but this page will help you understand if you do see an issue you feel falls outside of this. **Please see the tolerances in cm at the side of each image to the right Should you still feel they do not meet the requirement just give us a call and our returns dept can investigate further and rectify any errors where possible. Manufactured Garment & Printing Tolerances
Transcript of Manufactured Garment & Printing Tolerances of print.pdf · 2019. 9. 26. · garment so we have come...
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
Logoprintedhere
Logoprintedhere
Logoprintedhere
Logoprintedhere
Logoprintedhere
Logoprintedhere
Logoprintedhere
This print position will be generallycentered in the panel with a position
tolerance from either side+ or - 1.5cmand a position tolerance from
bottom of + or - 3cm
This print position will be aligned with the top stripeTolerance of position alignment from top stripe + or - 1.5cm
Tolerance of level of print to top stripe + or - 1cm
This print position will be aligned with the bottom hemTolerance of position alignment from hem + or - 1.5cm
Tolerance of level of print to hem + or - 1cm
-----------
-----------
-----------
-----------
-----------
-----------
-----------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
STEWARD TEAM------------
------------
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
STEWARD TEAM
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
------------
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
----
Acceptable
unacceptable
Acceptable
unacceptable
Garment manufacturing tolerances
unacceptable
Print aligned to top stripe
Print aligned centrewithin tolerances
If the bottom stripe not stitched 100% horizontalit may make print appear uneven but if print is alignedto top stripe to agreed tolerances = acceptable.if the bottom stripe is out by more than 1.5cm, this is unacceptable but our staff will check before printing that any like this are taken out..stitched stripe position tolerance of +or minus 1cm = acceptable
stitched stripe position tolerance of +or minus 1cm = acceptable
= perfect stripe position
As the garments are not all manufactured equal, tolerances for printing like below are acceptable
A perfect print below
Print not aligned within toleranceto stripes
This page will give you info on our allowed print tolerances.textile printing is unlike paper or solid substrate printing, in that no 2 garments are made identical as they are madeby hand and sewing machines.
This results in differences in the position of some items,e.g. stripes/pockets/badges/hems etc. For this reason, It is impossible to make a screenprint sit identical on everygarment so we have come up with a guide of what youcan expect when screenprinting bulk qty items suchas hi vis vests, or tee shirts etc.
OF COURSE, our operators do their best and will removeany items deemed outside of normal tolerances before printing or despatch, but this page will help you understandif you do see an issue you feel falls outside of this.
**Please see the tolerances in cm at the side of eachimage to the rightShould you still feel they do not meet the requirementjust give us a call and our returns dept can investigatefurther and rectify any errors where possible.
Manufactured Garment & Printing Tolerances
