Major Publications

Publications: 2015

1. Rajdev Tiwari, “Optimization of branch coverage ratio using teaching learning based

optimization techniques for automated test case generation”, JUET research journal of

science & technology, Jan 2015, Vol 2 No.1 pp: 85-94.

2. Rajdev Tiwari, “Energy Efficient threshold sensitive hierarchical routing protocol for

wireless sensor networks”, International Journal of Engineering and Computer Science, June

2015, Vol 4 issue 6, pp: 12345-12351.

3. Rajdev Tiwari, “Face Detection in Images using Modified Hausdorff distance”, International

Journal of Engineering Technology & Advance Engineering, April 2015, Vol 5 issue 1,

pp:33-36.

4. Rajdev Tiwari, “Column oriented database: implementation and performance analysis”,

International Journal of Science & Research, Sept 2015, Vol 4, issue 9, pp:1621-1623.

5. Rajdev Tiwari, “Managing the communication between different node randomly”,

International Journal of scientific research in science , engineering and technology, Dec

2015, Vol 1, issue 6, pp: 286-290.

6. Rajdev Tiwari, “Regional cluster based routing protocol for wireless sensor network”,

International Journal of Advanced research in computer science & electronics engineering,

May 2015, Vol 4, No.5,pp: 56-63

7. Niharika Dutt, “Optimization of gasoline yield in FCC riser unit using RSM”, Research

Journal of Pharmaceutical, Biological & Chemical Science, Aug 2015, Vol-06, pp 1269-78.

8. Ravi Kant Singh: “Isolation, characterization & growth of rhizobium strains under optimum

conditions for effective bio-fertilizer production”, International Journal of Pharmaceutical

Science Review & Research, April 2015, Vol-32, pp 199-208.

9. Mayank Kumar Pandey, Dr. Dileep Singh, “Global wings through international modes of

entry and Expansion” NIET Journal of Management, Volume VII, Issue 1, Summer 2015,

ISSN -0975-7643

10. Ekta Singh, “Importance of Exim Bank in the development of Indian Economy in Present

Scenario” NIET Journal of Management, Volume VII, Issue 1, Summer 2015, ISSN -0975-

7643

11. Singh Devendra, Aggarwal Gaurav,- “Critical Review Of The Companies Act 2013” Journal

of Engineering, ICT & Management, October, 2015/Issue 3/ ISSN No. 2230-9756

12. Subhi Singh, Ritesh Rastogi, and Prem Sagar Sharma, “Automatic Lecture Attendance

System using Face Reorganization,” in MATRIX Academic International Online Journal of

Engineering and Technology (MAIOJET), Volume: 3, Issue: 1, Page No.: 36-40, April 2015.

[ISSN: 2348–3326].

13. Amar Pal Yadav, and C. S. Yadav, “Dynamic Approach for Measuring Internal Attributes of

Object-Oriented System,” in International Journal of Advanced Research in Computer

Engineering & Technology (IJARCET), Volume: 4, Issue: 4, Page No.: 1617-1622, April

2015. [ISSN: 2278-1323].

14. Amar Pal Yadav, C. S. Yadav and Ram Kumar Sharma, “Comparative Analysis for

Traditional and Object-Oriented Approach using COCOMO-II Model for Cost Estimation,”

in International Journal of Advanced Research in Computer Engineering & Technology

(IJARCET), Volume: 4, Issue: 4, Page No.: 1623-1628, April 2015. [ISSN: 2278-1323].

15. Tabassum Saifi and Pradeep Kumar, “A Review Performance Evaluation of DCT, DWT and

N-Level Hybrid Technique in Image Processing,” in IMPACT: International Journal of

Research in Engineering & Technology (IMPACT: IJRET), Volume: 3, Issue: 3, Page

No.:45-50, March 2015. [ISSN: 2321-8843]

16. Tabassum Saifi and Pradeep Kumar, “Image Compressing using DCTWT & N-Level Hybrid

Technique,” in Indian Journal of Computer Science and Engineering (IJCSE), Volume: 6,

Issue: 1, Page No.:21-28, February-March 2015. [ISSN: 0976-5166]

17. Alpika Gupta and Rajdev Tiwari, “Face Detection using Modified Viola Jones Algorithm,”

International Journal of Recent Research in Mathematics Computer Science and Information

Technology (IJRRMCSIT), Volume: 1, Issue: 2, Page No.: 59-66, October 2104-March

2015. [ISSN: 2350-1022].

18. Subhi Singh, Ritesh Rastogi, and Prem Sagar Sharma, “Mobile Device Management to

Enhance Higher Education System,” in International Journal of Information Technology and

Management (IJITM), Volume: 8, Issue: 11, Page No.: 1-7, Febuary 2014. [ISSN: 2249-

4510].

19. Deeksha Sharma, Abdul Khalid, and Shradha Parasher, “Reversible Watermarking on

Medical Data," International Journal of Advanced Research in Computer Engineering &

Technology (IJARCET), Volume: 4, Issue: 1, Page No.: 11-17, January 2015. [ISSN: 2278-

1323].

20. Neelam, Pankaj Kumar and Atul Gupta, “Simulation Study and Implementation of Different

Mobile Ad-Hoc Network (MANET) Routing Protocol under Network Traffic,” in

International Journal of Computer Applications (IJCA), Foundation of computer science,

New York, USA, Volume: 121, Issue: 11, Page No.: 20-25, July 2015. [ISSN: 0975 – 8887].

[DOI: 10.5120/21585-4655].

21. Rashmi Gupta and Ramesh Chandra Sahoo, “A Survey on Routing Protocols of MANET in

Wireless Sensor Network,” in International Journal of Computer Science and Mobile

Computing (IJCSMC), Volume: 4, Issue: 4, Page No.: 812-822, April 2015. [ISSN: 2320 –

088X].

22. Sapna Sharma, Chitvan Gupta ,“A Review of Plant Recognition Methods and Algorithms”,

International Journal of Innovative Research in Advanced Engineering (IJIRAE), Issue 6,

Volume 2 (June 2015)

23. Sapna Sharma, Chitvan Gupta, “Recognition of Plant Species based on leaf images using

Multilayer Feed Forward Neural Network”, International Journal of Innovative Research in

Advanced Engineering (IJIRAE), Issue 6, Volume 2 (June 2015)

24. N. R. Chandak and Babu Amit. “Effect of lime sludge on the strength and compaction of

soil”, International Journal of Civil Engineering Research, SAP, 2015, 5(1): 18-20.

25. Kumar, S., Kumar, S., & Kumar, A. “Microstructure and Percentage Elongation Analysis for Friction Stir Welding of Joining A6061 and A6082 alloys”, Indian Welding Journal . Vol: 47 No.1, PP No.57-65.

https://www.researchgate.net/publication/271531308_Microstructure_and_Percentage_Elongation_Analysis_for_Friction_Stir_Welding_of_Joining_A6061_and_A6082_alloys

26. Kumar, A., Singh, H. & Maheshwari, S. “Flowability of Developed Agglomerated Fluxes During Submerged Arc Welding”, Journal of Mechanical Engineering (i-Manager

Publications), Vol. 5, No.2, February-April 2015, pp. 1-5. search.proquest.com/openview/b8de8cd45f09c2c306fc355eb8c48e15/1?pq...cbl...

27. Harveer Singh Pali, N. Kumar, Y. Alhassan [2015]. “Performance and emission characteristics of an agricultural engine with Sal methyl ester and diesel”, Energy Conversion

and Management, 90 146-153. http://dx.doi.org/10.1016/j.econman.2014.10.064(Elsevier, Impact Factor: 3.56).

http://www.sciencedirect.com/science/article/pii/S0196890414009595

28. Harveer Singh Pali, Chinmay Mishra and Naveen Kumar, “Production and Physico-

Chemical Characterisation of Kusum Oil Methyl Ester as an Alternative fuel in Diesel

Engine ” Journal of Biofuels, vol.4, pp. 38-46, 2013, doi: 10.5958/j.0976-4763.4.1.005 (ISSN 0976-3015).

https://scholar.google.co.in/scholar?q=production+and+physicochemical+characterization+of+kusum+oil+methyl+ester+as+an+alternative+fuel+in+diesel+engine&hl=en&as_sdt=0&as_vis=1&oi=scholart&sa=X&ved=0ahUKEwjP7LnG2L7QAhUFQY8KHSxoDggQgQMIDTAA

29. Yogesh Chaubey, ChandanKumar,SandeepChauhan, Failure Analyisi of Suspension

System:Case Study:- Tata Indica, International Jouranal for Scientific Research and

Development, Vol.3,Issue09, pp 1085-1090, 2015, ISSN2321 0613 http://www.ijsrd.com/Article.php?manuscript=IJSRDV3I90578

30. Kapil Kumar, Sumit Kumar Mishra, Sumit Kumar (2015), Modelling and optimization of

machining parameters in turning of H13 tool steel using response surface methodology-

desirability function approach, International Journal of Advance research and Innovation (ISSN 2347-3258).

www.ijari.org/CurrentIssue/ICARI2015/ICARI-ME-15-01-161.pdf

31. Kapil kumar, Samar Sultan (2015), Effect of Electromagnetic Field and Mechanical Milling in the Synthesis of Metal Matrix Nano Composite, International Journal of Advance research

and Innovation (ISSN 2347-3258). http://www.ijari.org/CurrentIssue/2015Volume4/IJARI-ME-15-12-109.pdf

32. Harveer Singh Pali, Naveen Kumar, Alhassan Y, Deep A, “Process Optimization of

Biodiesel Production from Sal Seed Oil using Response Surface Methodology [RSM] and Diesel”. SAE Technical Paper 2015-01-1297; 2015.doi:10.4271/2015-01-1297.

http://papers.sae.org/2015-01-1297/

33. Rajesh Kumar, S. Sharma, “Moments of inertia and B(E2;01

+→21+)s in the NpNn

scheme” Canadian Journal of Physics, 2015, Vol. 93, 93(7): 711-715, 10.1139/cjp-2014-

0386.

34. Rajesh Kumar, ‘’Generalized wavelet transform associated with Legendre polynomial”

International Journal of Computer Applications, December 2014, v0l. 108, no.12,pp 35-40.

35. Rajesh Kumar, ‘’Calderon’s reproducing formula for Fourier-Jacobi convolution’’

International Journal of Physical and Mathematical Sciences, vol.5, no. 1,(2015) pp 1-8.

36. Bhairaw Nath Tripathi,”Calderon’s reproducing formula for Dunkl Convolution” Eng. Math.

Lett. 2015, 2015:4, pp 1-7.

37. Garima Nagpal, A. Bhattacharya, N.B. Singh “ Removal of chromium (VI) from aqueous

solution by carbon waste from thermal power plant” , Desalination and Water Treatment ,

15-Apr-15 ,vol.(1), pp-11.

38. Garima Nagpal, A. Bhattacharya, N.B. Singh “Cu(II) ion removal from aqueous solution

using different adsorbents”, Desalination and Water Treatment, 17-Apr-15,Vol. (1), pp-10.

39. Bindu Nath Jha, “Language Attitude Research in Indian Context: An Evaluation of

Research Techniques” Research Chronicler, March-2015, Vol.(3) Issue(3).

40. Navin Rao & S Gairola, “Analysis of Shading Influence on modeling of standalone PV Array

system for Optimal power output”, International Journal of Electrical and Electronics

Engineering, Volume 07, Issue 01,Jan- June 2015, ICRISEM-15, pp. 30-42.

41. Paramita Saha,Anshuman Singh,Vijay K. Pandey,Binod K Kanaujia, M K

Khandelwal;”Design and analysis of UWB circular ring two element microstrip patch

antenna array with notched band for modern wireless applications” Wiley Periodicals,

Microwave and Optical Technology Letters/vol 57,No 9, September 2015.

42. Surya Deo Choudhary;”Model Developed for Single and Coupled Microstrip Structure

Useful for the Study of Reflection & Transmission Co-efficient and Losses in Microstripline”

(ISSN 2229-712X), Elixir International Journal, November 2015,88, P. 36535-36538.

43. Surya Deo Choudhary; “Speed Control of DC Motor using PID and Smart Controller”(ISSN

2229-5518) in International Journal of Scientific and Engineering Research (IJSER),

Volume 5, Issue 12, December 2014, P. 1044-1053.

44. Chinmayee Singh, Tejbir Singh, Prabhakar Agarwal, Mihir Kumar Jena, “Analysis and Design of Compact Branched Monopole Antennas for DCS/2.4 GHz & WLAN

Applications”, IJSER,Vol.6,Issue 2,Feb-2015,ISSN 2229-5518. 45. Smita Mishra and Somesh Kumar, 2015. “Survey on types of Bug Reports and General

Classification Techniques in Data Mining”,IJCSIT,Vol. 6,Issue 2, pp. 1578-1583 46. Bhupendera Kumar, Shruti Kohli, Rajdev Tiwari, “Dimensionality Reduction using Genetic

Algorithm” published in International Journal of Science and Research Volume 3 Issue 11,

November 2015,pp 48-54. 47. Amar Pal Yadav, C. S Yadav.,”Dynamic Approach for Measuring Internal Attributes of

Object-Oriented System”, International Journal of Advanced Research in Computer Engineering & Technology” (ISSN: 2278-1323),has been accepted in the Volume 4 Issue 4 May-2015.

48. Amar Pal Yadav, C. S. Yadav, Sharma Ram Kumar,” Comparative Analysis for Traditional and Object- Oriented Approach using COCOMO II model for Cost Estimation “,Computer

Engineering & Technology” (ISSN: 2278-1323),has been the Volume 4 Issue 5 of May-2015 49. Rashmi Gupta, Ramesh Chandra Sahoo “A Survey on Routing Protocols of MANET in

Wireless Sensor Network”, International Journal of Computer Science and Mobile

ComputingVol.4 Issue.4, April- 2015, pg. 812-822 50. Biruktawit G, B Daniel, Avijit Mazumder, A Kaleab, “In vitro Antimicrobial Activity of

Homonatatloin A/B and Homonataloside Against Pathogenic Microorganisms”, Ethiopian Pharmaceutical Journal, 31, 2015,27-34.

51. M Gebrehiwot, A Kaleab, B Daniel, Avijit Mazumder, P Lindermann, F Bucar, “Evaluation

of the wound healing property of Commiphora guidottii chiov. Ex. Guid.”, BMG Complementary & Alternative Medicine, 15:282, 2015, 1-11.(TMR—2.02)

52. M Mekdes, B Daniel, Avijit Mazumder, A Kaleab, “Structural elucidation of some antimicrobial constituents from the leaf latex of Aloe trigonantha L.C. leach”, BMG Complementary & Alternative Medicinfe, 15:270, 2015, 1-7. .(TMR—2.02)

53. A Gauniya., Rupa Mazumder., K Pathak., “Formulation, Optimization And Characterization Of Ziprasidone Nanocrytals By Media Millimg Technique”, International Journal of

Pharmacy and Pharmaceutical Sciences, 7(8), 2015, pp 146-150 (SJR—0.3) 54. K Siddiqui., Avijit Mazumder., G.S Chakraborthy., “A Review on Phytophamacological

Profile of Kigelia Pinnata (Jacq.), International Journal of Pharma Research & Review,

2015, 4(9), pp 34-38 55. P Yadav., Chandana Majee., “Method Development and Validation For Quantification of

Propranolol HCL in Pharmaceutical Dosage form by RP-UPLC”, International Journal of Pharm Tech Research, 2015, 7(1), pp-197-203 (SJR---0.28)

56. S Das., M.P Mazumder., S Das., “Newer Approaches for managing Gut Brain Disorders in

Functional Gastrointestinal Diseased Patients”, Research Journal of Pharmaceutical, Biological and Chemical Sciences,2015, 6(5), pp 104-S Das., M.P Mazumder., S Das.,

“Antioxidant Potential of Methanolic Stem Extract of Berberis aristata Dc. And Berberine-A Bioactive Compound Isolated From Berberis aristata DC”, International Journal of Pharma and Bio Sciences., 6(4), 2015, pp 349-360

57. S Kumari., Avijit Mazumder., S Bhattacharya., “Pharmacognostical and Antimicrobial studies of the stem of Tabernaemontana Divaricata Linn, International Journal Of Pharmacy

and Pharmaceutical Sciences, 7(8), 2015, pp. 101-104(SJR—0.3)

58. Salahuddin, Avijit Mazumder, Shaharyar M, “Synthesis, antibacterial and anticancer evaluation of 5-substituted (1,3.4-oxadiazol-2-yl)quinoline”, Medicinal Chemistry Research,

2014 59. Salahuddin, Avijit Mazumder, M Shaharyar, “Synthesis, Characterization, and In Vitro

Anticancer Evaluation of Novel 2,5-Disubtituted 1,3,4-Oxadiazole Analogue”, Biomed Research International, 2014, 1-14

60. Amrendra Kumar Chaudhary, Shamim Ahmed, Avijit Mazumder, “Isolation, structural

elucidation and in vitro antioxidant activity of compounds of chloroform extract of Cedrus deodara (Roxb) Loud”, Natural Product Research, 28(20), 1-6, 2014

61. Daniel Bisrat, Avijit Mazumder, Asres Kaleab, “ In vitro antimicrobial efficacy of a semisynthetic derivative of embelin” , Ethiopian Pharmaceutical Journal, 30,50-56,2014

Publications: 2014

1. Singh, Balbir, Kumar, Jitendra, & Kumar, Sudhir. “Experimental Investigation on

Surface Characteristic Sin Powder-mixed Electro discharge Machining of

AA6061/10%SiC Composite”, Taylor and Francis, Material and Manufacturing

Processes, 29; 287-297. 2014.

scholar.google.com/citations?user=8KIaHiUAAAAJ&hl=en

2. Kumar, V., Kumar, S., Kumar, A., & Gupta, P. “State of Art: Underwater Friction Stir

Welding”, Internation Journal of Applied Engineering Research, vol. 9, Nov. 9

2014, 1059-1062.

www.ripublication.com/Volume/ijaerv9n9spl.htm

3. Arya, D., & Gupta, R.K. “Simulation Studies on Variable Cluster Size in FCC Riser

Reactor”, Particulate Science and Technology: An International Journal, 32:2, 144-

150.

dspace.thapar.edu:8080/jspui/bitstream/10266/2274/1/joined_document_3.pdf

4. Ahmad, M., & Khan, B.H. “Simulation and Analysis of a New Grid Connected Solar

Inverter”, SJET, 2014; 2(3A): 320-325.

5. Kumar, A., Singh, H., & Maheshwari, S. “Effects of Developed Agglomerated Flux

Composition on Element Transfer of Weld Metal During Submerged Arc Welding”,

Indian Welding Journal Vol. 47, No.1, January, 2014.

6. Singh, Y., Dhiman, S.K., Singh,M., Bihari, C., Varshney, A.K., Gupta, K.K., & Gupta, D.K. “In

Search of Emperical Rule Relating E and B(E ) in Asymmetric Even-even

Nuclei of Mass Region A=90-120”, Canadian journal of Physics, v. 91, pp. 777-782.

7. Lal, S., Kumar, S., Khan, Z.A., and Siddiquee, A.N. “Optimization of Wire Electrical

Dicharge Machining Process Parameters on Material Removal Rate for

Al7075/Sic/Al2O3 Hybrid Composite”, Journal of Engineering Manufacturer , I-II,

2014.

http://dx.doi.org/10.1177/0954405414533511

8. Kumar, Sanjay, & Kumar, Sudhir. “Multi-response Optimization of Process Parameters

for Friction Stir Welding for Joinning Dissimilar Al Alloy by Gray Relation Aalysis and

Taguchi Method”, The Brazilian Society of Mechnical Sciences and Engineering,

Springer, 2014. DOI 10.1007/s40430-014-0195-2.

link.springer.com/article/10.1007/s40430-014-0195-2

9. Gupta, Prateek, & Kumar, Sudhir. “Investigation OF Stainless Steel Joint Fabricated

through Microwave Energy”, Taylor and Francis Group LLC, Material AND

Manufacturing Processes, 29:1-6, 2014.

http://www.tandfonline.com/doi/abs/10.1080/10426914.2014.892975

10. Kumar, Somesh, Singh, M.P., Goel, Rajkumar, & Lavania, Rajesh. “Hybrid Evolutionary

Techniques in Feed Forward Nural Network with Distributed Error for Classificvation

of Handwritten Hindi ‘SWARS’ ”, Connection Science 25:4, 197-215.

11. Shashi Prakash Dwivedi, “Effect of Process Parameters on Tensile Strength of Friction

Stir welding A356/C355 Aluminum Alloys Joint” Journal of Mechanical Science and

Technology 28 (1) (2014) 285~291. DOI 10.1007/s12206-013-0967-0. (Springer)

http://link.springer.com/article/10.1007/s12206-013-0967-0

12. Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra, “Microstructure

and Mechanical Behaviour of A356/SiC/Fly-ash Hybrid Composites Produced by

Electromagnetic Stir Casting” J Braz. Soc. Mech. Sci. Eng. (2014) DOI

10.1007/s40430-014-0138-y.(Springer)

http://link.springer.com/article/10.1007/s40430-014-0138-y

13. Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra, “A356 Aluminum

Alloy and Applications – A Review” Advance Materials Manufacturing and

Characterization, Vol.4, issue (2) 2014, pp 81-86.

https://www.researchgate.net/publication/266500847_Advanced_Materials_Manufacturing_Characterization_A356_Aluminum_Alloy_and_applications-A_Review

14. Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra, “Effects of Roller

Burnishing Process Parameters on Surface Roughness of A356/5%SiC Composite Using

Response Surface Methodology”, Adv. Manuf., (2014) DOI 10.1007/s40436-014-

0083-0. (Springer)

http://link.springer.com/article/10.1007/s40436-014-0083-0

15. Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra. “Microstructure

and Mechanical Properties of A356/SiC Composites Fabricated by Electromagnetic Stir

Casting” Procedia Materials Science 6 (2014) 1524 – 1532. (ELSEVIER)

http://www.sciencedirect.com/science/article/pii/S2211812814004982

16. Shashi Prakash Dwivedi, Satpal Sharma. “Optimization of Laser Transmission Joining

Process Parameters on Joint Strength of PET and 316 L Stainless Steel Joint Using

Response Surface Methodology”, Journal of Engineering Volume 2014, Article ID

197060, 9 pages. Hindawi Publishing Corporation

http://link.springer.com/article/10.1007/s12596-016-0335-4

17. Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra. “Comparison of

Microstructure and Mechanical Properties of A356/SiC Metal Matrix Composites

Produced by Two Different Melting Routes”, International Journal of Manufacturing

Engineering Volume 2014, Article ID 747865, Hindawi Publishing Corporation

https://www.hindawi.com/journals/ijme/2014/747865/

18. Shashi Prakash Dwivedi , Satpal Sharma, Raghvendra Kumar Mishra,

“Electromagnetic Stir Casting and its Process Parameters for the Fabrication and

Refined the Grain Structure of Metal Matrix Composites – A Review”, International

Journal of Advance Research and Innovation Volume 2, Issue 3 (2014) 639-649.

http://www.ijari.org/Current Issue/2014Volume3/IJARI-ME-14-09-113.pdf

19. Srivastava. A, Dixit. A.R., Tiwari. S. “Experimental Investigation of Wire EDM Process

Parameteres on Aluminium Metal Matrix Composite Al2024/SiC”, International

Journal of Advance Research and Innovation, Volume 2 (2014) 511-515.

https://www.researchgate.net/publication/270220079_Experimental_Investigation_of_Wire_EDM_Proces

s_Parameters_on_Aluminium_Metal_Matrix_Composite_Al2024SiC

20. Madheshiya S., Srivastava. A , Dixit. A.R., Tiwari. S. “A Review on Fabrication and

Characterization of Composite Material and its Buckling Analysis through FEM”,

International Journal of Advance Research and Innovation, Volume 2, issue 1,

(2014) 185-193.

https://www.researchgate.net/publication/262107597_A_Review_on_Fabrication_and_Characterization_of_Composite_Material_and_its_Buckling_Analysis_through_FEM

21. Srivastava. A ,Dixit. A.R., Tiwari. S. “ A Review on Fabrication and Characterization of

Aluminium Metal, Matrix Composite (AMMC)”, International Journal of Advance

Research and Innovation, Volume 2 (2014) 516-521.

https://www.researchgate.net/publication/270220073_A_Review_on_Fabrication_Characterization_of_Hybrid_Aluminium_Metal_Matrix_Composite

22. Srivastava. A , Garg. P. Kumar. A., Krishna.Y. Varsney. K.K. “A Review on Fabrication &

Characterization of Hybrid Aluminium Metal Matrix Composite”, International Journal

of Advance Research and Innovation, Volume 2,issue 1, (2014) 242-246.

https://www.researchgate.net/publication/270220073_A_Review_on_Fabrication_Characterization_of

_Hybrid_Aluminium_Metal_Matrix_Composite

23. Srivastava. A ,Dixit. A.R., Tiwari. S. “ Investigation of Microstructural and Mechanical

Properties of Metal Matrix Composite A359/B4C through Electromagnetic Stir Casting”,

Indian Journal of Engineering & Materials Sciences (2014) (IJEMS)

http://nopr.niscair.res.in/bitstream/123456789/35470/1/IJEMS%2023(2%263)%20171-180.pdf

24. Chopra, Himali and Rastogi, Ritesh . “Performance of QoS Aware Routing Protocol in

WSAN,” Matrix Academic International Online Journal of Engineering and

Technology (MAIOJET), Volume: 2, Issue: 2, Page No.: 7-11, October 2014.

25. Chopra, Himali and Rastogi, Ritesh . “A Brief Study on WSNs,” International Journal

of Electrical Electronics & Computer Science Engineering (IJEECSE), Volume: 1,

Issue: 4, Page No.: 1-4, August 2014.

26. Pandey, Nageshwar Nath and Khalid, Abdul. “Advance Algorithmic Approach for Face

Recognition,” International Journal of Latest Trends in Engineering and

Technology (IJLTEL), Volume: 3, Issue: 3, Page No.: 91-99, January 2014.

27. Varshney, Ankita, Khalid, Abdul, & Parveen, Shaziya. “Protection Techniques for

Transformed EEG Signals”, International Journal of Advanced Research in

Computer Engineering and Technology (IJARCET), vol. 3, issue 5, May 2014.

28. Sharma, Deeksha, Khalid, Abdul, & Parashar, Shradha. “Cryptographically Secure linear

Feedback Shift Register”, International Journal of Advanced Research in Computer

Engineering and Technology (IJARCET), vol. 3, issue 10, October 2014.

29. Kumar, Pawan, Goel, Raj Kumar, & Sharma,Prem Sagar. “A New Architecture of

Automatic Question Answering System using Ontology,” International Journal of

Computer Applications (IJCA), Vol. 97, Issue: 20, pp 1-4, July 2014.

30. Goel, Sachin and Mishra, Harsh Vardhan. “Information Theoretic Aspects for

Enhancement of Accuracy in Epilepsy Diagnosis,” International Journal of Scientific

Research in Computer Science and Engineering (IJSRCSE), Vol. 2, Issue 1, pp 1-5,

February 2014.

31. Goel, Sachin, and Mishra, Harsh Vardhan. “Quantitative Analysis of Epileptic EEG

Signals – An Information Theoretic Approach,” International Journal of Scientific

Research in Computer Science and Engineering (IJSRCSE), Vol. 2, Issue 1, pp 14-16,

February 2014.

32. Aggarwal, Mansi, Verma, Vineet Kumar, and Mishra, Harsh Vardhan. “Comparative

Study of Object-Oriented Software Metrics,” VSRD International Journal of Computer

Science & Information Technology (IJCSIT), Vol. 4, Issue: 1, pp 1-7, January 2014.

33. Kumar, Pawan, Goel, Raj Kumar and Sharma, Prem Sagar. “Domain Specific Named

Entity Recognition (DSNER) from Web Documents,” International Journal of

Computer Applications (IJCA), Vol 86, Issue 18, pp 24-29, January 2014.

34. Kumar, Deepak, Gupta, Anjana Rani, & Kumar, Somesh. “Dynamic Simulation of Multiple

Effect Evaporators in Paper Industry Using MATLAB”, NIET Journal of Engineering

and Technology, Vol. 5, issue Sep. 2014.

35. Kumar, Rajesh & Sharma, S. “Moments of Inertia and B(E2;01+→21+)s in the NpNn

Scheme”, Canadian Journal of Physics, Published on the web 13 October 2014,

10.1139/cjp-2014-0386. (SCI journal).

36. Kumar, Rajesh, Pathak, Ashish, and Sharma, S. “Perspective of Nuclear Structure”,

NIET- JET, accepted for publication (2014).

37. Vishnoi, Shweta, Kumar, Rakesh, & Singh, Beer Pal. “Effect of Substrate on Physical

Properties of Pulse Laser Deposited ZnO Thin Films”, Journal of Intense Pulsed Lasers

and Applications in Advenced Physics 4 (2) (2014). 35.

38. Kausik, Amrita, & Chauhan, B.S. “Application of TaguChi Optimization Approach for

the Removal of Cr (VI) from Aqueous Solution Using Husk of Eajanus Eajan” Research

Journal Of Chemistry And Environment, Oct.2014

39. Sharma, Satyendra, & Singh, Brahmjit. “Optimising capacity-coverage of a fixed

WiMAX network”, IET, MAP (8, 10, 2014, pp 708-713).

40. Pratap, Devendra, & Sharma, Satyendra. “Propagation Characteristics and Modeling of

Network Design and Planning”, International Journal of Electronics, Electrical

Computational Systems (IJEECS) (IISN 2348-117X) Vol2 issue1, 2014.

41. Pratap, Devendra, & Sharma, Satyendra. “Planning and Modeling of Indoor WLAN

through Field Measurement at 2.437 GHz Frequency”, NIET Journal of Engineering

and Technology (ISSN 2229-5828), 2014.

42. Mukti, & Pandey, V.K. “Analysis and Design of L-Strip Ultrawideband Antenna”,

International journal of Engineering Research and Development, Vol 10 Issue 9,

September 2014, PP- 42-45.

43. Mukti, & Pandey, V.K. “Analysis and Design of L-Strip Ultrawideband Antenna”,

International Journal for Research in Applied Science and Engineering

Technology (ISSN: 2321-9653) Vol. 2 Issue IV, April 2014.

44. Yukti Anand,V.K Pandey. “Slit Loaded Stacked Circular Microstrip Antenna for

Multiband Applications”, International Journal for Research in Applied Science and

Engineering Technology Vol. 2 Issue – IX ISSN: 2321-9653, September 2014.

45. Singh, Dhananjay, & Srivastava, Vivek Kr. The Propagation Characteristics of Circular

Optical Waveguide with Helical Widings”, IJEECS ISSN 2348-117x Volume 2, Issue 1

january 2014, Paper ID 0z4c9v.

http://academicscience.co.in/admin/resources/project/paper/ f201401191390115927.pdf

46. Singh, Dhananjay, & Srivastava, Vivek Kr. “The Study Of Propagation Characteristics

With Fractional Power In Core-Cladding Of Optical Waveguide Using Helical Signal”,

NIET Journal Of Engineering And Technology (ISSN 2229-5828), 2014.

47. Varshney, Gaurav, Verma, Anoop, Singh, Shailesh Kumar. “Ultra Wide Band Dielectric

Resonator Antenna For Wireless Communication”, International Journal Of Emerging

Technology And Advanced Engineering, (ISSN 2250-2459 (Online), Vol. 4, Special

Issue 1, February 2014).

48. Varshney, Gaurav, Verma, Anoop, Singh, Shailesh Kumar. “Inductive Coupling Effect On

The Radiation Pattern Of V-Shaped Antenna Array”, International Journal Of

Emerging Technology And Advanced Engineering, (Issn 2250-2459 (Online),

Volume 4, Special Issue 1, February 2014).

49. Kumar, Sudhanshu, Kumar, Pawan, & Srivastava, V. “Analysis Of Outage Probabil Ity In

Free Space Optical Communications”, International Journal Of Electronics, Electrical

And Computational System (IJEEC), Vol. 3, No. 3 Pp. 21-25, 2014.

50. Kumar, Sudhanshu, Kumar, Pawan, & Srivastava, V. “Analysis Of Bit Error Rates In

Free Space Optical Communication”, International Journal Of Electronics, Electrical

And Computational System (IJEEC), Vol. 3, No. 3 Pp. 36-44, 2014.

51. Kumar, Balbinder, Sahoo, S.K. & Verma, A.R. “Speed Enhancement Using Beta Wave let

Based On Hybrid Wiener Filter”, IEEE Explorer,Medcom 2014.

52. Kumar, Ravindra, Sahoo, S.K., & Kumar, Balbindra. “Design And Implementation Of Fft

Filter Using Vhdl Ip Core Based Design”, IJATES,Volume No. 02, Issue No. 12,

December 2014.

53. Dubey, Chandan Kumar, & Sharma, Satyendra. “Design and Verification Of Ddr3

Memory Controller”, IJATES, Vol. No 3, Issue No 13, May 2014.

54. Saroj, Jitendra Kumar, Sharma, Styendra . “Transimpedance Amplifier Based On

Inductive Peaking Techniques For Broadband Data Transimission”, Vol. 3, April 2014,

IJATES.

55. Anand, Gettanjali. “Design of Single Stage Integrated Bridgeless-Boost PFC Convertor”,

IEEE Medcom 2014.

56. Anand, Gettanjali. “Comparative Study of Bridgeless Pfcconvertor”, IJSRET 2014.

57. Gupta, Prateek, Kumar, Sudhir, &Kumar, Ajay. “ Study of joint Formed by Tungsten

Carbide Bearing Alloy Through Microwave Welding, Material and Manufacturing

Processes”, Taylor and Francis, 28, 5, 601-604, March 2014.

http://www.tandfonline.com/doi/abs/10.1080/10426914.2013.763966?journalCode=lmmp20

58. Agarwal, Prabhakar, & Pandey, V.K. “Mathematical Analysis of Dirichlet Window

Function in Fractional Fourier Transform Domain”, NIET Journal of Engineering and

Technology, 2014.

59. Anand, Yukti, & V.K Pandey. “Tunable Slit Loaded Stacked Circular Microstrip Antenna

for Multiband Applications”, International journal of Engineering Research and

Development Vol. 10, Issue IX, ISSN -2278-067X, 2014.

60. Jitendra Saroj, Kanika Jindal, & Sharma, Satyendra. “Study Of Cross Coupled Current

Conveyor Based Cmos Transimpedance Amplifier For Broadband Data Transmission”,

Vol. No 2, No.1, IJSE, ISSN No 2347-2200, 2014.

61. Rajput, Akansha, & Sharma, Satyendra. “Analysis And Logic Optimization Using

Logical Effort Technique Of Static Cmos Circuits”, IJCSET, Volume 4, ISSN 2229-3345.,

2014.

62. Mehta, Unnati C., & Sharma, Satyendra. “VLSI Implementation Of 2048 Point Fft/Ifft

For Mobile Wi-Max”, ISSN: 2319-112, IJAEE, 2014.

63. Sharma, Shyam Sunder, Bhardwaj, Deepak, & Pandey, V.K. “Implementation of OFDM

Modem Using VHDL and Comparison on Different FPGA Platforms”, 2014.

64. Singh, Ashutosh Kumar, Bhardwaj, Deepak, & Pandey, V.K. “Implementation Of

Ternary Logic Circuits”, Academic Science, ISSN (2347-8616,2347-8572), 2014.

Publications: 2013

1. Kumar, A., Singh, H., & Maheshwari, S. “Modeling and Analysis of Elongation for

Submerged Arc Welded Joints by Using Developed Agglomerated Fluxes”, Proceedings

of the Institution of Mechanical Engineers, Part B: Journal of Engineering

Manufacture July 2013, vol. 227, no.7, pp 1005-1012.

https://www.researchgate.net/publication/288494848_Modeling_and_analysis_of_elongation_for_sub

merged_arc-welded_joints_by_using_developed_agglomerated_fluxes

2. Kumar, A., Singh, H,. & Maheshwari, S. “XRD and DTA Analysis of Developed

Agglomerated Fluxes For Submerged Arc Welding”, Journal of Metallurgy (Hindawi

Publishing Corporation). Vol. 2013, Article ID 827491, January, pp. 1-8.

https://www.hindawi.com/journals/jm/2013/827491/

3. Swarnali, D.P., Mazumdar, R., Bhattacharya, S., and Jha, A.K. “Optimzation of Polymric

Nano Drug Delivery System Using 32 Full Factorial design”, Current Drug Delivery,

10, 6 Issues, 2013.

4. Chandak, N.R. “Effect of Base Isolation on the Response of Reinforce Concrete

Building”, Journal of Civil Engineering Research, 2013, 3(4): 135-142.

5. Sharma, S., & Singh, B. “Field Measurement for Cellular Network Planning”, Journal of

Bioinformatics and Intelligent Control, vol. 2, 1-7, 2013.

6. Bhati, G, Kumar, Sudhir, Chaudhari, Ajay. “Selection of Best Coating Material

Composition Used in Expendable Polystyrene Assisted Investment Casting Process by

Using Fuzzy- AHP”, Indian Foundry Journal, Feb. vol. 59, (2), 2013, 1-20.

7. Sharma, Neeraj Kumar, Pandit, SN, Vaish, Rahul, & Srivatava, Vivek. “Effective

Young’s Modulus of Ni-Al2O3 Composite with Particulate and Interpenetrating Phase

Structure: A Multi Scale Analysis Using Object Oriented FEM”, Computational Material

Science 2013, Elsvier B.V., PP 320-324.

https://www.researchgate.net/publication/275285589_Effective_Young's_Modulus_of_Ni-Al2O3_composites_with_particulate_and_interpenetrating_phase_structures_A_multiscale_analysis_

using_object_oriented_finite_element_method

8. Pali, HS, Mishra, Chinmay, & Kumar, Naveen. “Production and Physic-chemical

Characterization of Kusum Oil Methyl Ester as an Alternative Fuel in Diesel Engine”,

Journal of Bio fuels, Vol. 4, Issue 4, June 2013, pp 38-46.

link.springer.com/article/10.1007/s13369-016-2127-1

9. Vibhandhu, Vipul, Kumar, Naveen, Mishra, Chinmay, & Pali, HS. “Experimental

Investigation of Diesel Engine Fuel With Jatropha Oil Blend With Ethanol”, SAE

International, 2013, vol. 6, issue 3

saefuel.saejournals.org/content/6/3/951.abstract

10. Kumar, Abhishek, Lal, Shyam, & Kumar, Sudhir. “Fabrication and Characterization of

A359/ Al2O3 Metal Matrix Composite Using Electromagantic Stir Casting”, JMR&T,

2013.2(3).

www.sciencedirect.com/science/article/pii/S2238785413000616

11. Bhati, Girendra, Kumar, Sudhir, Kumar, Ajay, & Rajput, Daizy. “Optimization of

Coating Materials Used on Expendable Polystyrene Pattern in Investment Casting

Process”, I-Manager Journal in Mechanical Engineering, Vol. 3 No. 2, 2013, pp 21-

31.

https://www.researchgate.net/.../271531379_

12. Kumar, Ajay, Singh, hari, & Maheshawari, Sachin. “ A Review Study of Submerged Arc

Welding Fluxes”, I-Manager Journal in Mechanical Engineering, vol. 3 No. 2, 2013,

pp 44-49.

imanagermechanicaljournal.blogspot.com/2013_06_01_archive.html

13. Garg, Tulika, Mathur, Priyank, Singhal, Varun, Jain, Chirag and Gupta, Prateek.

“Underwater Friction Stir Welding an Overview”, International Review of Applied

Engineering research, Vol. 4 No. 20, pp 165-170.

www.ripublication.com/iraer-spl/iraerv4n2spl_12.pdf

14. Shashi Prakash Dwivedi, Bhavya Gupta and Devesh Chaudhary, “The Effect of Process

Parameters on Mechanical Stir Casting Process” NIET Journal of Engineering &

Technology, Vol. 1, Issue 2, 2013, pp. 1-7. ISSN: 2229-5828.

Niet.co.in/niet-publication.php

15. Gyanchandra Sharma, Shashi Prakash Dwivedi and Ashok Kumar Yaday, “Analysis of

Four Stroke Single Cylinder Compression Ignition Engine Oper-ated with Blends of

Waste Cooking Oil Biodiesel/Diesel” NIET Journal of Engineering & Technology,

Vol.1, Issue 2, 2013, pp. 54-58.

Niet.co.in/niet-publication.php

16. Aggarwal, Mansi, Verma, Vinit Kumar, and Mishra, Harsh Vardhan. “An Analytical

Study of Object-Oriented Metrics (A Survey),” International Journal of Engineering

Trends and Technology (IJETT). Vol. 6, Issue 2, pp 76-82, December 2013.

17. Khatri, Suman and Ali, Irfan. “Hindi Numeral Recognition using Neural Network,”

International Journal of Advance Research and Innovation (IJARI), Vol. 3, Issue 2,

pp 115-123, December 2013.

18. Kumar, Prakash, Kumar, Pradeep & Kumar, Vikas. “Load Balancing Strategy for

Computational Grid System using an Improved Algorithmic Approach,” International

Journal of Computer Applications (IJCA), Vol. 79, Issue 8, pp 46-50, October 2013.

19. Srivastva, Aradhana, Kumar, Pankaj, & Goel, Rajkumar. “A Systematic Survey on

Network Intrusion Detection System using PCA and NBA,” International Journal of

Trends in Computer Science (IJTICS), Vol. 2, Issue 11, pp 1-20, November 2013.

20. Sharma, Ram Kumar, & Sharma, Nagesh. “A Dynamic Optimization Algorithms for

Task Scheduling in Cloud Computing with Resource Utilization,” International Journal

of Scientific Engineering and Technology (IJSET), Vol. 2, Issue 10, pp 1062-1068,

October 2013.

21. Srivastva, Aradhana, Kumar, Pankaj & Goel, Rajkumar. “Evaluation of Network

Intrusion Detection System using PCA and NBA,” International Journal of Advanced

Research in Computer Engineering & Technology (IJARCET), Vol.2, Issue 11, pp 35-

40, November 2013.

22. Mishra, Jyoti & Ali, Irphan. “Performance Comparison of Automated Model based Web

Performance Testing,” International Journal of Research Fellow for Engineering

(IJRFE), Vol. 1, Issue: 6, pp 07-16, October 2013.

23. Uprety, Manisha & Kumar, Somesh. “Pattern Association in Hopfield Neural Network

with MC-Adaption Rule and Genetic Algorithm,” International Journal of Science and

Technology (IJCST), Vol. 4, Issue 3, pp 372-375, September 2013.

24. Adhakari, Pitamber & Yadav, C. S. “A Cross Honeyfarm based Defense against Worm

Attacks,” International Journal of Research Fellow for Engineering (IJRFE), Vol. 1,

Issue: 7, pp 32-46, September 2013.

25. Uprety, Manisha & Kumar, Somesh. “Hopfield Neural Network as Associated Memory

with Monte Carlo-(MC-) Adaption Rule and Genetic Algorithm for pattern Storage,”

International Journal of Research in Communication Technology (IJRCT), Vol. 2,

Issue 8, pp 595-600, September 2013.

26. Chaudhary, Shaila, Rastogi, Ritesh & Kumar, Prakash. “Analyzing The facial Expression

in Emotion Recognition System,” International Journal of Research Fellow for

Engineering (IJRFE), Vol. 1, Issue 7, pp 59-69, September 2013.

27. Malik, Vikrant & Yadav, C. S. “Agent Based Message Communication in Grid World,”

International Journal of Research Fellow for Engineering (IJRFE), Vol. 1, Issue 7, pp

80-93, September 2013.

28. Singh, Sudarshan & Rastogi, Ritesh. “Investigation and Implementation of an SMS

Service using IMS Web Environment,” International Journal of Research Fellow for

Engineering (IJRFE), Vol. 1, Issue 7, pp 103-110, September 2013.

29. Sharma, Ram Kumar & Sharma, Nagesh. “Analyzing & Solving Task Scheduling &

Resource Scheduling Problems by Algorithm in Cloud Computing,” International

Journal of Research Fellow for Engineering (IJRFE), Vol. 1, Issue 7, pp 121-133,

September 2013.

30. Kumar, Prakash, Kumar, Pradeep, & Kumar, Vikas. “Computational Grid System Load

Balancing using an Efficient Scheduling Technique,” International Journal of

Computer Trends and Technology (IJCTT), Vol. 4, Issue: 8, pp 2501- 2504, August

2013.

31. Kesherwani, Ajay & Yadav, C. S. “An Optimized APFDc Test Case Prioritization

Techniques using PSO,” VSRD International Journal of Computer Science &

Information Technology (IJCSIT), Vol. 3, Issue 8, pp 287-292, August 2013.

32. Kumar, Prakash, Kumar, Pradeep & Kumar, Vikas. “Scheduling Approach for Load

Balancing in Grid Computation System,” International Journal of Computer Science

Engineering and Information Technology Research (IJCSEITR), Volume: 3, Issue: 3,

Page No.: 259-266, August 2013.

33. Srivastava, Vivek Kumar, Goel, Rajkumar & Bharti, P. K. “Application Of Fuzzy Logic

In Decision Making & Grid Technology,” International Journal of Engineering

Research & Technology (IJERT), Vol. 2, Issue 8, pp 761-765, August 2013.

34. Kumar, Prakash, Kumar, Pradeep, & Kumar, Vikas. “Backfilling Strategies for

Computational Grid System Load Balancing,” International Journal of Computer

Science and Mobile Computing (IJCSMC), Vol. 2, Issue 8, pp 7-13, August 2013.

35. Singh, Manisha, & Kumar, Somesh. “Exploring Optimal Architecture of Multi-Layered

Feed-Forward (MLFNN) as Bidirectional Associative Memory (BAM) for Function

Approximation,” International Journal of Computer Application (IJCA), Vol. 76, Issue

16, pp 28-32, August 2013.

36. Srivastava, Vivek Kumar, Goel, Rajkumar & Bharti, P. K. “The Analysis of Scalability

of Grid Computing through Ad-Hoc for Different Types of Protocols and also Cheek

Security Measures in Mobile Ad-Hoc Networks,” VSRD International Journal of

Computer Science & Information Technology (IJCSIT), Vol. 3, Issue 8, pp 1-6, August

2013.

37. Kumar, Prakash, Kumar, Pradeep, & Kumar, Vikas. “An Effective Dynamic Load

Balancing Algorithm for Grid System,” International Journal of Computer Trends

and Technology (IJCTT), Volume: 4, Issue: 8, Page No.: 1- 6, August 2013.

38. Singh, Manisha, & Kumar, Somesh. “Using Multi-Layered Feed-Forward Neural

Network (MLFNN) Architecture as Bidirectional Associative Memory (BAM) for

Function Approximation,” IOSR Journal of Computer Engineering (IOSR-JCE), Vol. 13,

Issue 4, pp 34-38, July-August 2013.

39. Srivastva, Daya Shankar, and Yadav, C. S. “A Study of Traditional Size Estimation

Metrics for Object-Oriented Software,” VSRD International Journal of Computer

Science & Information Technology (IJCSIT), Vol. 3, Issue 2, pp 261-268, August

2013.

40. Kausik, Amrita, & Chauhan, B.S. “Removal of As(III) and er(VI) from Aqueous Solution

Using Khangar: Kinetic and Thermodynamic Studies”, International Journal Of IT,

Engineering and Applied Science Research, vol. 2 (3), March 2013.

41. Sharma, Satyendra, & Singh, Brahmjit. “Experimental Study of a fixed WiMAX network

at 2.62 GHz”, Springer, WPC (75,pp 2127-2141,2013).

42. Sharma, Satyendra, & Singh, Brahmjit. “WiMAX network for capacity and coverage

assessment”, Springer, WPC (72,2,pp 1573-1586,2013).

43. Sharma, Satyendra, & Singh, Brahmjit. “Field measurement for Cellular network

planning”, ASP, JBIC (2, pp 1-7, 2013).

44. Yadav, Anupam Kumar, & Pandey, V.K. “Slotted Dumbbell Shaped Microstrip Patch

Antenna For Wimax Frequency Band Of 3.4-3.69 Ghz”, International Journal Of

Engineering And Advanced Technology (IJEAT) Issn: 2249 – 8958, Volume-2,

Issue-6, August 2013.

45. Saroj, Jitendra Kumar, Rana, Aruna, & Kathuria, Nitin. “High Gain Aperture Coupled

Patch Antenna”, Vol. No 01, Issue 2013, NIET Journal.

46. Rajput, Akansha, & Sharma, Satyendra . “Implementation Of Cmos Circuits In Logic

Optimization Using Logical Effort Technique”, IJEC, Vol. 2, Issue 11, November 2013.

47. Mehta, Unnati C., & Sharma, Satyendra. “VLSI Implementation Of 2048 Point Fft/Ifft

For Mobile Wi-Max”, Vol. 65-No 25, IJCST, 2013.

48. Aggarwal, Arpit, Singh, Anshuman, & Yadav, Ram Lal. “A Study Of Image Features

Extraction Using Fpga Architecture”, IJAST, Vol. 2, Issue 9, 2013.

49. Sonika, Mahajan, S.K., & Singh, Anshuman. “Reducing Npvt Variations Using Adaptive

Body Biasing Compensation Techniques”, IJARSE, Vol. No 2, Issue No 8, August 2013.

50. Sonika, & Singh, Anshuman. “Adaptive Body Biasing Process Compensation

Techniques For Digital Circuit”, IJERA, Vol 3, Issue 1, 2013.

51. Lal, S., Kumar, S., Khan, Z.A., and Siddiquee, A.N. “An Investigation on Effects of WEDM

Parameters on Surface Roughness of Newly Develop Hybrid MMC”, Journal of

Engineering Manufacture, December 2013.

pib.sagepub.com/content/early/2013/12/02/0954405413506703

52. Aggarwal, Arpit, Singh, Anshuman, & Yadav, Ram Lal. “Expedition Of Image Features

Extraction Using Fpga Architecture”, IJRFE, Vol. 1, Issue 7, Issn-2320-7396,

September 2013.

53. Singh, Balbir, Kumar, Jitendra, & Kumar, Sudhir. “Investigating the Influence of Process

Parameter ZNC EDM on Machinability of A6061/ Sic Composite”, Hindavi Publishing

Corporation, Advances in Material Science and Engineering, vol.2013, Article ID

173427, pp 21-31.

downloads.hindawi.com/journals/amse/2013/173427.pdf

54. Singla, VK, Kumar, Sudhir, S., Rajesha, & Mishra, RR.” Manufacturing and Drilling

Analysis of Formed Carbon Fiber Composite”, 2013.

https://scholar.google.com/citations?user=tIsrGdAAAAAJ&hl=en

Miscellaneous

1. Kamboj, Abhiskek, Kumar, Sudhir, Singh, Hari. “Experimental Investigation of Thrust

and Torque in Drilling Al 6063/Sic Composite by High Speed Steel Step Drill”, Indian

Journal Research,

http://waset.org/publications/9998035/multi-response-optimization-in-drilling-al6063-sic-15-metal-matrix-composite

2. Lal, S., Kumar, S., Khan, Z.A., and Siddiquee, A.N. “Wire Electrical Dicharge Machining Of

AA7075/Sic/Al2O3 Hybrid Composite Fabricated By Inert Gas Assisted Electromagnatic

Stir Casting Process”, Journal of Brazilian Society of Mechanical Science and

Engineering. DOI 10.1007/s40430-013-0087-x.

http://link.springer.com/article/10.1007/s40430-013-0087-x

3. Lal, S., Kumar, S., Khan, Z.A., and Siddiquee, A.N. “Research and Development in Wire

Elecrical Discharge Machine (WEDM): A State of Art Review”, NIET Journal of

Engineering and Technology.

http://niet.co.in/nietpfd/2_Research%20and%20Devlopments%20in%20Wire%20Electrical%20Discharge%20Machining%20(WEDM)%20A%20State%20of%20Art%20Review.pdf

4. Kausik, Amrita, & Chauhan, B.S. “Removal of As(III) and er(VI) from Aqueous Solution

Using Khangar (Burnt Coal Waste) Using Taguchi’s Optimizing Methodology”.

5. Ji, Shyam, & Kumar, Vivek. “Lexicology and Readability in Anita Desasi’s Pinapple

Cake”. IJLLT (ISSN 2347-355X).

6. Ji, Shyam, & Kumar, Vivek. Stylistic Analysis of a Page from Anita Desai’s Fire on the

Mountain”, in English Literature a Canon ed. Dr Satpal Singh.

7. Kumar, Vipin. “Religion in Mulk Raj Anand’s Short Fiction” in English Literature a

Canon ed. Dr Satpal Singh.

8. Varshney, Gaurav, Verma, Anoop, & Singh, Shailesh Kumar. “Bandwidth Enhancement

Of Dielectric Resonator Antenna By Merging Of Adjacent Bands”, IEEE Transactions