Maintenance Release 8.2 July 7, 2011 - Topcon Support · PDF file ·...

Maintenance Release 8.2July 7, 2011

The information contained in this document is confidential and is intended solely for the use of the individual or entity to which it wassent. You should not copy, disclose or distribute this document without the authority of Topcon Positioning Systems, Inc.

© Topcon Positioning Systems, Inc., 2011

Table of Contents

8.2 Features and Changes 4 Important Notes! 4 Equipment 4 General 4 Survey 4 Stakeout 58.1 Features and Changes 6 Important Notes! 6 General 6 Equipment 6 Coordinate Systems 6 Survey 7 Import/Export 7 Stakeout 7 Roads 78.0 Features and Changes 8 General 9 Installation Options 9 Main Menu 9 Connections Prompt 10 Discontinued Products 10 Equipment 12 Controllers 12 GPS 12 Optical 14 Configure 15 Coordinate Systems 15 Global 15 Codes 15 Stake Reports 16 Survey 17 Import/Export 19 Codes 19 Drawings 19 Machine Control 19 Roads 20 Stake Reports 20 Code Styles 21 Edit Job 22 Layer 22 Stake Reports 22 Edit Roads 24 Roads 24 Setup 26 Backsight 26 Localization 26 Resection 27 Start Base 28


COGO 29 Area 29 Volumes 29 Survey 31 User Interface - Survey 31 Monitoring 31 Scanning 32 Topo 32 Stake 33 User Interface - Stakeout 33 Stake Reports 35 Linework 36 Roads 37 Real-Time Roads 38 Stake Slope 39


8.2 Features and Changes

Important Notes! It is recommended that existing jobs are backed up prior to installing any software update.

Hiper II antenna information has been updated with the latest NGS calibration numbers. Users withexisting jobs should export to common export formats (e.g. LandXML, TP3, GC3, DWG, ASCII,TXT) and create new jobs to avoid elevation changes is the existing job.

Equipment Added support for Gowin total station.

General Added the ability to set the display precision for Angles, Distances, Coordinates, Elevations and

Stakeout Data (including Stake Reports).

Added Square/Cubic units in reports.

Added the ability to append data to an existing CMM file during export.

Added the ability to display distances in chains.

Support for chains as a unit type for import/export was added.

Swapped the exported name/description values for TP3/GC3 localizations.

Import SBG format road file was improved to properly support the X-Section Set names and verticaloffsets in templates.

Changing NTRIP mountpoint no longer loses the mmGPS+ solution.

Survey Virtual objects improved in TOPO with IS Live Video.

Monitor observations now continue if a prism is missing.

Scanning without image performance was improved for the FC-2500.


Coarse scanning no longer stops after each row.

Insert command for linework now works for Robotic mode.

Stakeout Values no longer remain on screen if the robotic measurements are not being received.



Important Notes! FC-236 users should install to the Device, and NOT to the Storage Card.

GRS-1 users that use the Q-26 Elite Modem should make the internet connection through the OS,and use the Existing Connection option in Survey > Configure.

General Support for Import of Code Libraries with special characters has been added. Special characters

cause conflicts with parsing codes properly; therefore, they will be stripped off during the importprocess. Note that codes with special characters and spaces are not allowed in the code library.

Option added to turn on L2C in GPS configurations.

Updated status of power setting for the RC-4.

Equipment FC-236 (Getac PS236) Controller

GPT-3200 Total Station

GTS-240 Total Station

Coordinate Systems Malaysian grid 2009

Geodetic reference datum for Latin America (SIRGAS 2000)

Romania coordinate system (New improved GRID 2010)

OSU91a Geoid Model

Czech Datum S-JTSK05

Support for Geoids based on datums other than WGS84 has been added when performing GRIDand Datum Localization

Survey


Rod Height related issues fixed

Angle Sets improved

Continuous measurements with RC4 improved for Auto Topo

Last HR is restored when reopening a job

Decreased time QS takes to begin searching

Fixed issues with changing EDM to Long Prism Mode on IS Robot

Deviation calculations updated for 2D+H resection

Increased speed of Topo logging

Fixed offset calculation issue in GPS mode

Session schedule is appropriately set in Hiper II for negative time zones

Import/Export Angle Set report updated

TDS/Carlson/FBK output is updated to handle multiple angle sets with multiple side shots

Fixed issue with export vertical alignments to TDS rd5 format

Codes exported in alphabetical order to XML library

Stakeout Added the ability to Stake Points using total station tracking mode

Roads Added the ability to select background polylines when creating String Sets.


General

Installation Options During the installation process, the option to install support for the Import / Export of DWG 2008 and ESRI Shape File

formats must be manually selected (checked on).

These are optional formats that will increase the size of the TopSURV installation.

If memory on the target device is limited, do not install these libraries.

Main Menu OBS Mode is now Connections

The Connections icon displays the same dialog as the Connections Prompt.

This function has been updated to display the same dialog as the connection prompt, and allows the user to quicklychange between stored configurations.


Connections Prompt General Tab - Added To base/To rover connection option for GPS.

Network Tab - Added options for Auto-Connect . This option automatically connects to the last used mountpoint.

Network Tab - Added Auto-Disconnect from Mount Point on disconnection from receiver. With this option off, thereceiver will remain on the network, even if you disconnect from the serial connection.

Green arrow goes back to the Main Menu.

Discontinued ProductsTopSURV 8 no longer supports the following field controllers:

FC-100


FC-120

FC-2000

Juniper Allegro CX

TDS Recon

Note: Juniper Allegro MX users can download the Windows Mobile installation to use this product.


Equipment

Controllers Support for Getac PS236 . Please use the Windows Mobile installation.

Support added for GRS-1 Barcode Reader.

We now have added support of camera on all Windows Mobile devices which have a camera using the Micorsoftcamera API.

GPS Support added for GR-5 receiver.

Network RTK with mmGPS for Hiper II is now supported.


Support added for Sokkia GNSS receivers.

o GNSS receivers: GSR2700ISX, GSR2700IS, GSR2600, GSR1700CSX and Radian IS.

o External UHF modem Satel 3Asd

o External GSM Modem Siemens MC35i (RTK CSD)

RH-1 Digital UHF can be configured as a transmitter over Bluetooth.

Digital UHF spacing option added.

Satel PCC mode option added.


Optical Added support for Topcon Digital Levels DL-502/503 .


Configure

Coordinate Systems Irish Geoid (available during installation)

Romania coordinate system

French new altimetric grid RAF09, RAC09

Change transformation parameters of the "Arlon" zone in the TopSURV Belgium system

Added new zone projection "Bruxells" into the TopSURV Belgium system.

Supported localizations based on user-selected projection/datum.

Added SPHERE ellipsoid – this allows users to create custom datums based on an ideally spherical ellipsoid.

View of points in Denmark Coordinate system is now mirrored.

Global Go to Configure >> Global to restore the Connection Prompt if toggle off in the Connections dialog.

Codes Upon installing TopSURV 8 data collection software, a default Code Library file will automatically be installed. If an

existing library has not been previously selected in TopSURV 7, this library will be automatically selected in Configure>> Codes.

The default code library is set to be the Global Code library used during data collection.


If an end user does not want to use this default Code Library for their field work, they simply will have to remove andinstall (point to) their existing Code Library.

To remove, go to Configure >> Codes and either clear out the path within the Data Entry edit field or Browse to yourexisting Code Library file.

Configure when to Prompt for Code as needed

Stake Reports Routine specific configurations.

Point Used in staking routines that do not report stationing, or use surfaces, or roads.Line/Arc Used in staking routines that report stationing, but do not use a Road.Surface Used is the Stake DTM routine.Road Used in the Stake Road and Stake Real-TIme Road routines.Slope Used is the Slope Staking routine.

Unlimited configurations can be created.

Reports are completely customizable with the ability to define column order, headers, and display (on / off).


Survey NTRIP connection can be set up based on web address instead of IP Address for controller-side Internet connection

only.

Extended list of the Internet Providers for NTRIP connections.

An appropriate Virtual Radio Port is selected automatically , based on the receiver model.


Support added for setting the receiver in “Forest” mode. This feature is located in the Configuration setup wizard as"Canopy Environment".


Import/Export

Codes Added ability to import/export code library from/to a user defined comma delimited file .

Added support for SurvCE v2 code library.

Drawings Added ability manually/automatically set size of text in exported DXF/DWG files.

Machine Control Supported import/export from/to Topcon machine control project file (TP3).


Roads Added support for Road String Sets between jobs.

Added support for Road String Sets between LandXML files.

Toggling on the option X-Sections include catch points adds the ability to detect template slopes and extract theslope values from the outer 2 points of the imported X-Sections.

Stake Reports After a staking project, reports can be exported directly from TopSURV. From main menu, go to Export >> To File and

select a Data export type of Stakeout Reports .

Stakeout Reports can be from any type of staking that was done (Point, Line / Arc, Roading, Surface, and Slope).


Resulting reports will be in the CSV (comma separated values) file format.

Code Styles Added support for Control Code aliases.

Add support for aliases for Code/String/ControlCode/Attribute Separators.

Unlimited export configurations can be saved to generate the deliverable that the receiving CAD product requires.

Code Styles is support in Export Multiple, Topcon Custom Text, and SurvCE, TDS, and SDR raw data formats.


Edit Job

Layer The Layers dialog has been updated to allow the ability to sort layers and define their drawing order or visual display.

Just click on the header of any column (Layer Number, Layer Name, or Layer Status) to sort by. The order, from top tobottom, is the order that items will be ordered / displayed in Map Views.

Stake Reports Multiple report can be created for each types of stake report (e.g. Point, Road, Slope, Line/Arc, Surface).

Up to five current reports can be set. This allows separate stake reports for each routine.

Spreadsheet viewer allows for clipboard-ease of viewing your report, configured the way you like to see it.


Edit Roads

Roads Added support for High/Low Positions to be computed for the Grade and Station option in Vertical Alignments

(Feature located in the Context Menu)

The segment points will now be stored by User Names instead of a Job Codes.

Added support for String Sets as an alternative method for defining the road ’s surface. Note that any single string canhave gaps, as shown in the EPL example below.

String Sets can be created from a 3D polyline, horizontal & vertical alignment pairs, or mix a polyline's horizontalgeometry with a vertical alignment for defining a string from a 2D drawing and a manually entered profile.

The dialog for editing a road has been split in to two pages, Alignment and Surface .

Added support for Working Corridor .


Setup

Backsight Updated for a smoother workflow and layout that allows for more on-screen information during setups.

Localization Grid Localization is now possible for applying and shifting projections. This feature will perform a two-step operation

using the user selected projection and/or datum to localize to ground points. When importing ground control it isimportant to define the points as ground coordinates if they are going to be used in the localization.

Apply a projection in Configure >> Coord Sys to activate the new options in Localization shown below.

Select Setup >> Localization to view the new options shown below.


Resection Routine updated to include weighting options entered by the user.

Added Resection method 2D+H.

Start Base


Added a modem connection process bar.

Added an option to automatically startup the UHF radios after Start Base is selected.


COGO

Area Added the ability to select linework to compute an area.

Added support for areas with curves.

Volumes User can select two TN3 files and get a volume report.

Report can be saved to a text file.


Survey

User Interface - Survey Moving and Current Position indication

More map area throughout

Collapsible status and zoom toolbars

Monitoring Added Monitor Config to menu in the initial point list selection screen.

Added the option to store points as Check Shots.


Scanning Updated Scanning point selection so any 3 points can be selected to determine area to scan (no longer necessary to

pick the top-left, bottom-left and bottom-right corners).

Topo Support for Multi-point Arcs in Topo. Using Arc Start (AS), you can now collect any number of arc points before using

Arc End (AE).


Stake

User Interface - Stakeout Added support to use Alignments as the directional reference (e.g. To/Away CL).

Added availability of Stake Design offsets to all stake routines.

Each view mode (Interval/Real-Time/Slope/Offset/etc) will remember what values are shown for that particularmode.

HR is now available on the stakeout navigation screenTap and hold to call up the View Panel to easily switch to one ofthe 5 possible Stakeout views (Cross Section View only in Road and Slope Routines).

Can also access View Panel from Context Menu.


Four user definable labels

Tap any stakeout label to change displayed output

Recall in every routine

Updated the Store Point dialog prompt (optional in Configure >> Codes >> Prompt).


Interval Staking or Real-Time mode available in the context menu.

Stake Reports Each stake routine shows the current Stake Report

Each routine allows for easy selection and creation of stake reports using the ... button.


Access the Stake Report from the Context Menu

Linework Users can now stake either a line (polyline) or a job string.

Ability to stop at transition points.

Ability to add horizontal and vertical offsets

Ability to do interval or real-time stakeout of a linework.


Various stakeout options for curve points and angle points (e.g. Bisector or Radius Point).

Roads Allow for negative stations when staking out a Road.

o When beyond the vertical alignment, the design elevation with show an asterisk to alert the user that thegrade is being interpolated.

o When beyond the end of the horizontal alignment, the Road alignment will be extended by a tangentsegment .

Stake Road switches from real-time to interval when the user is in real-time mode and presses one of theprevious/next station buttons.

Added the ability to select up to 50 additional road surface segment, or point references for additional reporting.

Added the ability to Extend a cross section surface beyond the edge of the road.

Add the ability to extend a Surface Left/Right until beyond the next segment point .

Added the ability to stakeout the intersection of an offset segment where it intersects the cross section itself


(Intersect Left/Right)

Added ability to define vertical or perpendicular up/down offsets (Intersect Left/Right)

Real-Time RoadsTM

The cross section segment at the rod position is highlighted in real-time, and the routine can now report cut/fill to thesurface at the rod position, or the cut/fill and offset to the two segment points on either side of the current rodposition.

When the rod position is outside of the hinge point the routine automatically switches to slope staking with thesame features that Stakeout Slope has for setting offset stakes to the catch point.

Additional cross section segments and points can also be reported using the Set References option in the contextmenu.

The data labels can be user configured by clicking on them.

The design slope can now be defined by the template slope values, or user entered values.


Stake Slope The hinge point can now be any segment point on the cross section.

The slope direction can now be right or left of the hinge point, regardless of the side of the road it is on.

The store point dialog now keeps track of each individual offset when staking multiple offsets to the catch point .

Offset to Catch Point is now selected on the Data tab when storing a Catch Point/Offset Point.

Stake Slope switches from real-time to interval when the user is in real-time mode and presses one of theprevious/next station buttons.

If the user is staking offsets to the catch point and they press one of the previous/next station buttons, the routinewill automatically advance and begin slope staking the next catch point.

The design slope can now be defined by the template slope values, or user entered values.

Maintenance Release 8.2 July 7, 2011 - Topcon Support · PDF file ·...

Documents

Transcript of Maintenance Release 8.2 July 7, 2011 - Topcon Support · PDF file ·...