Machanical Engineeing Jabalpur Knpc Poly
-
Upload
surendra-saini -
Category
Documents
-
view
229 -
download
0
Transcript of Machanical Engineeing Jabalpur Knpc Poly
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
1/33
1
FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION
(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)
Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected]
Branch : Mechanical. Name of Laboratory : Energy Measurement and Monitoring
S
No.
Name of the Equipment
to be procured
Quantity Curriculu
m
Reference
s
Specification (please give enclosure
references)
Cost of
equipm
ent (in
Lacs)
Background material.
Product Brochure.
Printout of productspecifications giving
website
reference/URL.(Please
give enclosure
reference)
1 Power
Analyser(3phase)
01 No Automob
ile code-(611)
Salient Features
Accurate and reliable measurement of any Load - nonlinear like DC drives, Invertors, Furnaces, UPS etc. - Un
balance Loads
Continuous cycle by cycle measurement of all currentand voltage channels
Suitable for 2 wire / 3 wire / 4 wire - 3 phase systems
Wide range of Clamp on CT 3000A
2MB memory with programmable interval of datacollection from 1sec to 30mins
Recorded parameters can be stored and viewed in PCfor detailed analysis
RS232 Communication facility with computer to transferthe data
Time of Day (TOD) measurement - Recording on anyspecified time period
Portable - Self powered from measurement source
User set alarm for low PF, Failure errors, min / maxvalues
Bright LCD graphical display for menu driven display
02 http://www.induselect.com/en
ergy-monitoring-equipment/power-
analyzer.html
mailto:[email protected]:[email protected]:[email protected]://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlhttp://www.induselect.com/energy-monitoring-equipment/power-analyzer.htmlmailto:[email protected] -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
2/33
2
Parameters Displayed:
o Voltage, Current, Frequency, Power Factor
o KW, KVA, KVAR (Import & Export)
o KWHr, KVAHr, KVARHr
o Peak Voltage, Current and Power
Technical Specifications
Voltage :300 V L-N and 510 V L-L RMSCurrent : Clamp on CTs. 100 Amps. To 3000 Amps.Power Supply:220V AC - 50 HzData Memory :1 MB / 2 MB and USB / RS232communication portDisplay : LCD Graphical Display
2 Ultrasonic water flowmeter
01 No FM/HM(401)
Features
DSP Measurement Technique
Reynolds Number Correction
Easy to Install
Simple to Follow Programming Menu
Clamp-on Sensors
Flow Range 0.1m/sec to 20m/sec bi -directional
Display 64 x 240 pixels graphic display
Programming via 16 key control panel
Battery or mains operation
Rechargeable battery
Battery Life 20 hours from fully charged, load depended
Power 110 240VAC +/-10% supply via PSU
9 user selectable languages including English, German,
French, Spanish and Russian!
Accuracy Pipe ID > 75mm 0.5% to 2% of flow reading
for flow rate >0.2m/s
Accuracy Pipe ID 13-75mm 3% of flow reading for flow
rate >0.2m/s
03 http://www.flow.co.in/ultrasonic-flow-meter.htm
http://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htm -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
3/33
3
3 Flue gas analyser 01 No Thermal
Engg(402)
Operating Temperature Range : 25C to 350CBattery Rechargeable Ni-Cd, Life 4-5 hours, charge time 2hoursCharger Input Voltage 230V; 50 ACFuels Natural gas, light oil, heavy oil, propane, butane, coal,cokeDisplay LCDData Logging / Printing USB/ RS232 or parallel portTime and Date 24 hour real time clockPrinterImpact with a replaceable ribbonCertification Designed to meet BIS or BS7927 BritishStandard for portable flue gasanalyzersProbes with cable length minimum 10 mConstruction Pistol grip; 250 mm or more stainless steelprobe length;depth gauge; 2500 mm or more hose lengthK-type ThermocoupleAccuracy 0.3%; or 1C ( 1.8F)Maximum Temperature 800C andHigh temperature to 1,100C , 1.0 m insertion length
Gases Range Resolution AccuracyOxygen 0 - 25%, Accuracy 0.1% - 0.3%Carbon Monoxide 0 - 10,000 ppm , Accuracy 1 ppm for 1000 ppmNitric Oxide 0 - 1,000 ppm , Accuracy 1 ppm for 1000 ppmCarbon Dioxide (Calculated) 0 - 25%CO/CO2 Ratio 0 - 0.9999Combustion Efficiency 0 - 100%With following SensorsRange Resolution AccuracyNitrogen Dioxide 0 - 2000 ppm, Accuracy 1 ppm for 100 ppmSulfur Dioxide 0 - 2,000 ppm , Accuracy 1 ppm for 1000 ppmHydrogen Sulfide 0 - 200 ppm , Accuracy 1 ppm 40 ppmHydrogen Chloride 0 - 50 ppm , Accuracy 1 ppm for 40 ppmHigh Capacity Carbon 0 - 100,000 ppm , 1 ppm for 1000 ppmMonoxide (Instead of Standard) >100 ppm; Accuracy 5%
05 http://www.flow.co.in/ultrason
ic-flow-meter.htm
http://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htmhttp://www.flow.co.in/ultrasonic-flow-meter.htm -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
4/33
4
Draught / PressureMeasurement RangeAccuracy 150 mbar ( 61 in WG)Resolution 0.01 mbar (0.4 in WG)Accuracy 0.5% fsd measured at 50 mbar (20 inWG)
K-Type ThermocoupleAccuracy 0.3%; or 1C4 Smoke meter 01 No Thermal
Engg
(402)
Measurement principle:
Measurement of filter paper blackening
Measured value output:
FSN (filter smoke number) or mg/m (soot concentration)
Measurement range:
0 to 10 FSN
Detection limit:
0.002 FSN or ~ 0.02 mg/m
Resolution:
0.001 FSN or 0.01 mg/m
Exhaust pressure ranges:
(-300*) -100 to 400 mbars
(-500*) -200 to 750 mbars with the special sampling option
0 to 3000 mbars with the high-pressure option
(*) with activated altitude simulationMaximum exhaust temperature:
600 C with standard 340 mm sample probe (800 C with
780 mm long sample probe)
Interfaces:
2 serial RS232 interfaces with AK protocol
Digital via Instrument Controller 4210
1 Ethernet interface with InPort option installed with AK
protocol
Power supply:
100 115 VAC or 230 VAC, 50/60 Hz
Power consumption:
700 VA
Compressed air (for compressed air option):
~150l/min during purge
Compressed air quality required:
Grades 1.1.1 to 1.4.1 according to ISO 8573.1:2001(E)
Recommended connection pressure on the AVL Smoke
Meter: 5 to 8 bars at the measurement device input
Sample flow:
~ 10 l/min
Ambient conditions:
5 to 55 C / max.95 RH; without condensation
01 :https://www.avl.com/smoke-
meter
https://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meterhttps://www.avl.com/smoke-meter -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
5/33
5
Sea level -500 to + 5000 m
Repeatability:Standard deviation 1 s = (0.005 FSN + 3 % of the
measured value @ 10sec intake time)5 Digital Psychrometer 01 No RAC
(621)
FEATURES:
Simultaneous display of %RH, Temperature and Dew
point or Wet Bulb or Probe Temperature Unique sensor cap design twists to closed position for
protection during storage
Switchable F/C temperature units with 0.1 resolutionAuto power off to save battery life
Includes external temperature probe SPECIFICATIONS:
Humidity:Range: 10 to 90%RHMax Resolution: 0.1%RH
Accuracy: 3%RHTemperature (internal):
Range:-4 to 122F (-20 to 50C)Resolution: 0.1
Accuracy: 1F or 0.6CTemperature (external):
Range: -4 to 158F (-20 to 70C)Resolution: 0.1
Accuracy: 1F or 0.6CDew Point: -90.4 to 122F (-68.0 to 49.9C)Wet Bulb: -6.9 to 122F (-21.6 to 49.9C)
0.1 URL:http://www.globalw.com/prod
ucts/rh305.html
6 Tongtester 04 No Mat.
Technology (301)
DISPLAY: 3999 Counts.
DCV: 0.4 / 4 / 40 / 400V 0.8%, 1000V 1.0%
ACV: 4 / 40 / 400V 1.0%, 700V 1.2% DCA: 400 / 1000V 3.0%
ACA: 400 / 1000V 3.0%
RESISTOR: 400 / 4k / 40k / 400k / 4MOhm 1.0%,40MOhm 2.0%
CAP: 4n / 40n / 400n / 4 F 4.0% FREQUENCY: 40Hz to 100kHz 2.0%
TEMPERATURE: -40C to 750C 1.0% DUTY CYCLE: 0.1% to 99.9% DIODE TEST CONTINUITY TEST
DATA HOLD POWER: BATTERY 6F22 ( 9V ) x 1
0.1 URL:http://www.sigmainstruments.com/p35_
digital_clamp_meter_tong_tester.htm
http://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.htmlhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.sigmainstruments.com/p35_digital_clamp_meter_tong_tester.htmhttp://www.globalw.com/products/rh305.htmlhttp://www.globalw.com/products/rh305.html -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
6/33
6
7 Optical Pyrometer 1no 01 No EMMP(503)
Measuring
Technology
Disappearing
filament, based on
original L&N
pyrometer
Measuring
Ranges
Range1 760C to
1240C/1400F to
2264F
Range 2 1075C
to 1760C/1967F
to 3200F
Range 3 1500C
to 2850C/2732F
to 5162F
Range 4 1900C
to 4200C/3452F
to 7592F
Wavelength 0.65 microns
(same as L&N
opticals and thecurrent N.I.S.T.
standard
Focal Range Standard 7" to
infinity
Optional close up
lens 2" to 6"
Optional long
distance magnifier24" to infinity
Small Target
Capability
0.04" or smaller
Accuracy/Li
nearity
% of reading 1
digit: Range 1-
0.25%
Range 2-0.3%;
Ranges 3 and 4-
0.4%
1.0 URL:http://www.spectrodyne.com/
DFP2000/specs.asp
http://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asphttp://www.spectrodyne.com/DFP2000/specs.asp -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
7/33
7
Ambient
Temperature
Range
0C to 50C
Humidity 0 to 90% RH non-
condensing
Power Rechargeable
battery with "auto
off" battery saver
circuit
Display LCD with 1
resolution, field
changeable from
C to F or vice
versa
Housing Cast Aluminum
Tripod
Mounting
x 20 thread
Math
Function
Averages up to 10
readings on
demand
Output Analog output
10" Cable included
8 Thermocouple 01 No EMMP
(503)
Technical Details -
Type:R, S, BElement size (MI):0.30, 0.35, 0.4, 0.45, 0.5 (mm)(Non-MI):1.2, 1.6, 2, 2.5, 3.2 (mm)
Protection Sheath M:Ceramic (KER 710), 610, Inconel,Silicon carbide, etc.Configuration:Simplex / Duplex / Multipoints
Type Names of Materials Application Range
R Platinum 13% Rhodium (+) 0 to 1600C
Platinum (-)
S Platinum 10% Rhodium (+) 0 to 1600C
Platinum (-)
B Platinum30% Rhodium (+) 600 to 1600C
Platinum 6% Rhodium (-)
1.0
URL:
http://www.tempsens.com/noblemetalthermocouples.html
http://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.htmlhttp://www.tempsens.com/noblemetalthermocouples.html -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
8/33
8
9 Pitot Tube 01 Set FM/HM(401)
. Accuracy 1% of actual flow rate - verified by
independent flow laboratories. Repeatability of measurement 0.1% Reynolds number. Minimum Re:1.2x104 Flow rate turndown typically 10:1 (100:1 of DP) The
restriction being the resolution of the transmitting deviceunder a square root relationship.
Maximum working pressure up to 500 bar with selected
models, materials and fittings. Maximum working temperature up to 600 deg. C with
selected models, materials and fittings Maximum viscosity 200 cp (mPas) Short upstream and downstream straight pipe lengths. Long term accuracy unaffected by wear.
0.2 URL:http://www.instrumatics.co.nz/
pitot-tubes/
10 Lux Meter 01 No MT (301) RANGE0 to 50000 Lux in 3 ranges of 0 to 2000, 0 to 20000 and 0 to
50000 Lux. Range selection may be provided on with front
panel
ACCURACY
5% 2 least counts.RESOLUTION
1 in the range of 0 to 2000 Lux.10 in the range of 0 to 20000 Lux.
100 in the range of 0 to 50000 Lux.DATA HOLD :Facility should be provided.DISPLAY
3 Digit, 7 segment LCD type of 12.5mm height.
X10, X100, data hold and low battery indications facilitiesPOWER REQUIREMENTS
9 volts battery.STANDARD ACCESSORIES
Battery, instruction manual/operating manual and carrying
case
0.01 URL:http://www.sigmainstruments.
com/p15_digital_lux_meter.htm
11 Anemometer 01 No MT (301) Range : 0.5 to 35 m/s. Low friction ball-bearing and carefully balanced vane
results in
accurate velocity measurement.
4 display mode : m/s. km/h, ft/min. knots.
Data hold for easy reading.
Ideal for use in checking air conditioning and heating
systems,
measuring air velocity, wind speed.Technical Specification : Air velocity : 0.4~30.0 m/s,
+2%+1d. 1.4~108.0 km/h, +2%+3d. 80~5910 ft/min,
+2%+2d. 0.8~58. 9 Knots, +2%+2d. Resolution : 0.1 m/s,
kn/h, knots or 1 ft/min. Battery : 1.5V x 4.
0.2 URL:http://www.sigmainstruments.
com/p15_digital_lux_meter.htm
http://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/http://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.sigmainstruments.com/p15_digital_lux_meter.htmhttp://www.instrumatics.co.nz/pitot-tubes/http://www.instrumatics.co.nz/pitot-tubes/ -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
9/33
9
12 Stroboscope 01 No MT (301) Flash Range30 - 12,500 FPMFlash Brightness
1200 Lux (8"/20cm distance @ 4500 fpm)Accuracy
0.01% over entire range + 1 LSD
0.04 HzResolution
1 FPM over entire rangeDisplay
5-digit LCDDisplay Update
0.5 secondsFlash Energy
170 mJFlash Duration
< 9 sFlash Tube Life
200 million flashes (at 6,000 fpm)Flash Color Temp
6,000K - 6500KExternal Trigger
0-5 volt, DTL/TTL compatible 1/8" jackOptional* Trigger Signal Output
0-5 volt, DTL/TTL compatible 1/8" jack
* on PK2X-OT Model OnlyOperating Time
Battery, 2 hours
AC-Power, continuousBattery Type
Lithium Ion (Li-Ion)Battery Charger
AC Power Required, 100-240 VAC, 50/60 Hz
DC-Output, 9 VDC @ 2000 mA max
Charging Time, 4-5 hoursOvercharge Protection
Yes
Housing MaterialHigh Impact ABS PlasticReflector Material
AluminumTripod Mount
1/4-20, female insertOperating Temp.
32 to 104 F (0 to 40 C)
0.3 URL:http://www.checkline.com/stro
boscopes/PK2X
http://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2Xhttp://www.checkline.com/stroboscopes/PK2X -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
10/33
10
13 Digital Tachometer 1no 01 No FM/HM(401)
Specification
Display : 4.5 Digit LED with Leading Zero Blanking.
Measurement : a) PHOTO- TACHOMETERRange : 20 RPM to 75,000 RPM (Resolution 10 RPM
over 9,999 RPM)Distance :Operating from 3 to 5 inch using a Reflective
Photo-Reflective Sticker.
Light : Red Visible LED Light ( No Filament Bulb Used)b) CONTACT TACHOMETER
Range : 15 RPM to 25,000 RPM (Resolution 10 RPM
over 19,999 RPM). The Upper Speed is Limited by Error
caused by Rubber Roller Slippage.
c) SURFACE SPEED
Range : 2 TO 2,500 RPM For all Operations,
(CONTACT/NON-CONTACT) an LED indicates when the
RPM exceeds 10,000 & effectively a 'x 10' comes into
operation.
Power Supply : 4 standard Pencil Cells.Accuracy : 1 RPM 1 LSD below 9,999 RPM &
10 RPM 1 LSD above 19,999 RPMCalibration : Referred to Quartzz Crystal.
Sampling Time: 1 sec. over60 RPMCircuit : Micro Controller based LSI
Operation Temperature : 0 - 50C
0.1URL:
http://www.countronics.com/v
iew_our_products.php?id=37
14.01#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurement
Place :
Date :
Seal & Signature of Principal
http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37http://www.countronics.com/view_our_products.php?id=37 -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
11/33
11
FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)
Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)
Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected] Branch : Mechanical. Name of Laboratory : Heat Engine Lab
S
No.
Name of the
Equipment to
be procured
Quantity Curriculum
References
Specification (please give enclosure references) Cost of
equipm
ent (in
Lacs)
Background material.
Product Brochure.
Printout of productspecifications giving
website
reference/URL.(Ple
ase give enclosurereference)
1 Educationalmodel ofLamont Boiler
01 No ThermalEngg (402)
Properly constructed non working model made of wooden and metal
parts showing necessary parts such as boiler, feed pump, checkvalve, Economiser, Evaporimeter, mud-drum, Circulatory Pump,super heater, main valve, Bleeder, Ash Pan, Grate, overall size about75 x 19 cm and height about 51 cm.
0.1 http://www.elabengineeringequipments.com/product-details/lamount-boiler-
model-257.html
2 Educational
model ofBenson boiler
01 No Thermal
Engg (402)
Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts such as Economiser, Superheater, Separate Evaporator and feed pump etc. Overall size about50 x 20 x 75 cm.
0.1 http://www.elabengineeri
ngequipments.com/product-details/benson-boiler-
model-258.html
3 Educational
model of
Loeffler boiler
01 No Thermal
Engg (402)
Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts such as Economiser, pressConvection, Super heater, Steam Outlet, Radian Super Heater, feedpump and circulatory Pump etc. Overall size about 50 x 20 x 70 cm.
0.1 http://www.elabengineeri
ngequipments.com/produ
ct-details/loefer-boiler-model-259.html
4 Educational
model of boiler
mountings andaccessories
01 Set Thermal
Engg (402)
Properly constructed non working model made of wooden andmetallic parts. Showing necessary parts.
0.4 http://www.elabengineeri
ngequipments.com/catego
ry/Heat-Engine-Lab-Models-1-59.html
5 Diesel EngineTest rig for
performancemeasurement
01 No ThermalEngg (402)
Specification :-The test rig the rig comprises of a four stroke diesel engine coupled toa rope brake dynamometer / hydraulic dynamometer / electricaldynamometer. In rope brake dynamometer a water-cooled brakedrum along with spring balances, comprises rope brake. For hydraulicdynamometer a suitable capacity hydraulic dynamometer is provided.
2 http://www.elabengineeringequipments.com/produ
ct-details/twin-cylinder-diesel-engine-test-rig-
mailto:[email protected]:[email protected]:[email protected]://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/category/Heat-Engine-Lab-Models-1-59.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/loefer-boiler-model-259.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/benson-boiler-model-258.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlhttp://www.elabengineeringequipments.com/product-details/lamount-boiler-model-257.htmlmailto:[email protected] -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
12/33
12
For Electrical dynamometer water rheostat/load bank is used asloading arrangement. With the help of various measurementsprovided the test ring can determine BHP, IHP mechanical andthermal efficiencies, air fuel ratio, specific, fuel consumption and heatbalance sheet at various loads.SPECIFICTIONS:1) Engine: "Comet" make or "Kirosker" make four stroke, single
cylinder, Water cooled, constant speed, vertical diesel engine,developing 5 BHP at 1500 rpm.
2) Dynamometer Rope brake: Rope wound around water-cooledbrake drum and spring balance.ORElectrical: Suitable capacity Generator and water rheostat/load bank
with load measurement.ORHydraulic Dynamometer can be also supplied instead of rope and
Electrical Dynamometer.3) Air intake measurement arrangement.4) Fuel intake measurement arrangement.5) Multichannel Digital Temperature Indicator.6) Water circulated exhaust gas calorimeter.The whole unit is mounted on a sturdy frame. A technical manual
accompanies the unit.SERVICE REQUIRED:
Watersupply about 10 lit/min.230 V, 5A. AC, supply with earthing connection.
A hand tachometer.Floor grace - 3m X 2m X 2 In height.
(A) With Rope Brake Dynamometer
(B) With Electrical Dynamometer
(C) With Hydraulic Dynamometer
618.html
6 Petrol Engine
Test rig forperformance
measurement
01 No Thermal
Engg (402)SPECIFICATIONS:[1] Engine - "Premier / Hindustan / Maruti" Make automotive petrol
engine (Reconditioned) Four stroke four cylinder, water cooled,developing 20 BHP at 3000 RPM. provided with battery and selfstarter.
[2] Dynamometer Rope Brake DynamometerORSuitable capacity dynamometerORElectrical dynamometer with load bank.
[3] Measurement provided ;
(i) Fuel intake measurement(ii) Air Intake measurement.(iii) Water circulated through engine jacket.(iv) Water Circulated exhaust gas calorimeter.
2 http://www.elabengineeri
ngequipments.com/product-details/multi-cylinder-
4-stroke-petrol-engine-test-rig-621.html
http://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/multi-cylinder-4-stroke-petrol-engine-test-rig-621.htmlhttp://www.elabengineeringequipments.com/product-details/twin-cylinder-diesel-engine-test-rig-618.html -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
13/33
13
(v) Digital Temperature Indicator for Exhaust gas & watertemperature. Tachometer.(vi) Gauges for oil pressure & battery condition.(vii) Arrangement to cut off the ignition to conduct morse test.SERVICES REQUIRED:[1] Water supply 15 Lt/min.[2] 230 V, AC supply with earthing[3] Floor space - 3M X 2M X 2M height.(A) With Rope Brake Dynamometer
(B) With Electrical Dynamometer
(C) With Hydraulic Dynamometer
Total 4.7#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurementPlace :
Date :
Seal & Signature of Principal
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
14/33
14
FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION
(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)
Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)
Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected]
Branch : Mechanical. Name of Laboratory : Applied Mechanics Lab
SNo.
Name of theEquipment to be
procured
Quantity Curriculum
References
Specification (please give enclosure references) Cost ofequipment
(in Lacs)
Background material.
Product Brochure.
Printout ofproduct
specificationsgiving website
reference/URL.(Please give
enclosurereference)
1 Experimental setupfor AppliedMechanics lab
01 No App.Mecha
nics
(201)
EXPERIMENTAL SET UP COMPROSISES OF FOLLOWING
EXPERIMENTS:-
1.Universal Force Table
Full Specification ( Universal Force Table (Superior) ): It
consists of cast aluminum plate of 400 mm dia. graduated in 360
degrees. The table is fitted on a case iron stable base with
leveling screws to make the table in leveled position. It is possible
o fix the table in any desired position. Supplied will six set of
brass nickelled slotted weight each set containing nine weights
and one hanger of 50 gms. Complete with six sliding clamping
pulleys to fix up the same at any desired angle
2.Parallelogram of Forces Apparatus
Full Specification ( Parallelogram of Forces Apparatus ):It
consists of a wooden board of about 60x 50 cm. size with wall
brackets, two frictionless clamp pulleys, and three set of slotted
weights of iron, nickelled each set containing four iron nickelled
weight and one hanger of 50 gms.
3.Polygon of Forces Apparatus
Consisting of 750 x 700 nun board made of soft and seasoned
wood with brackets for fixing it with wall. It is supplied with
1.25 http://www.elabengineeringequipments.com
mailto:[email protected]:[email protected]:[email protected]://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/http://www.elabengineeringequipments.com/mailto:[email protected] -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
15/33
15
following accessories.
(A) Six frictionless pulleys of 5 cm dia mounted with frame so that
he pulley can be fixed at any position on the edges of the board.
Without foundation bolts.
(B) Six weight pans with chain, hook and string.
(C) A set of following weights of physical weight box of iron (duly
nickalled)
(i) 500 gm 05 Pcs.
(ii) 200 gm 05 Pcs.
(iii) 100 gm 05 Pcs.
(iv) 50 gm 05 Pcs.
(v) 20 gm 10 Pcs.
(vi) 10 gm 10 Pcs.
4.Inclined Plane Apparatus (Superior Quality)
Specification : The plane may be clamped at any angle up to 45
degree. The unit is complete with frictionless pulley, roller,
carriage and scale pan but without weights.
5. Polygon of Forces Apparatus
Specification:Consisting of a wooden board of about 75x 70 cmsize provided with two wall brackets and four adjustable
frictionless aluminum pulleys, complete with four one kilogram
weights and one scale pan.
6.Hooks Law Apparatus
Mirror Scale 12cm long
(b) S.S. Scale 12cm long
(c) Plastic Scale 12cm long
(d) Mirror Scale 15cm long
(e) S.S. Scale 15cm long
(f) Plastic Scale 15cm long
7.Compound Lever
Comprising of two iron beams connected to each other and fitted
on two different stands, well balanced with a scale pan. All metal
parts fitted on wooden polished base. Completed with 1 kg.
Weight and a physical iron nickelled weight box 1-50 gms.
8.Simple Jib Crane
Specification
Consisting of a tubular compression balance, pivoted about an
axis fitted to the base. The tie chain has an adjustable angle
bracket and fitted with a 10 kg extension balance. Complete on
wooden base with 1.2 meter jib. Without weights.
9. Geared Jib Crane
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
16/33
16
Specification
Strongly built frame mounted on a heavy cast iron and
comprising of single and double wheels. The gears are machine
cut and the jib is 1.2 meter high and tapered at both ends. The
purchase. Complete with cord and hooks. Without weights.
10.Rope Brake And Dynamometer
Specification
Consists of cast iron truly machined wheel of about 45cm. dia
with a groove. The steel axle is mounted on ball bearings to
minimize friction and assembled on a sturdy wooden frame.
Provided with an extension balance, rope and a set of slotted
weights and hanger.
11. Crony Brake Dynamometer
Specification
Consisting of a two blocks of wood clamped together with a
pulley in the center. The pulley is fitted to shaft moving on the
ball bearings. A lever bar is attached to one two blocks carrying
a weight hanger at the outer end. A spring balance is also fitted
to measure the load factor developed with the tightening of theblock with wing nuts and spring.
12. Pulley Blocks
Sturdy and accurate chromium plated. Pulleys and frame are of
all brass. Sheave Dia. 8cm,Width of Groove 6mm:-
(1) Single
(2) Double
(3) Triple
13. Differential Pulley Block Model
Specification:A cast aluminium double sheave pulley block
having the bigger pulley of 15 cm dia and the smaller one of 10
cm. Dia mounted on sturdy cast aluminium bracket and moving
freely on two steel cone bearings. A snatch pulley of 5 cm dia of
5 cm thickness groove is supplied with the unit. Without weight
or cord.
14. Pulley System Different Type
Specification
(A) First System Pulleys: With four single pulleys all brass of 5
cm with string and two pans but without pulley frame and without
weights.
(B) Second System Pulleys: With two triple long pulley (large
pulley 5 cm. dia, middle pulley 4 cm., and small pulley 2 cm. dia.)
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
17/33
17
all brass with two scale pans (but without pulley frame), without
weights.
(C) Third System Pulleys: Having 5 cm. dia four all brass pulleys
with two scale pans, (without pulley frame) and without weight
sets.
(D) Frame For Above: Pulley Frame with metal uprights but with
wooden base. Over all height about 80 cm.
15. Wheel and Differential Axle 20cmSpecification
Same as Cat No. 9056 but wheel is 20 cm in diameter and the
axle is in two steps of 10 & 5 cm respectively.
16. Wheel and Axle Simple Form
Specification
Comprising two polished wooden wheels with grooves 7. 5 cm
and 12 cm in diameter respectively, fixed rigid together and
mounted on steel centers on wooden base. Complete with cord
and hooks.
17. Screw Jack
SpecificationAll metallic construction accurately machine cut screw with a
pitch of 5mm carrying a double fanged turn table of about 20 cm
diameter. Fitted on a heavy cast iron base and complete with
two adjustable pulley, cord and hooks. Weights are not included.
18. Screw Jack (small size)
Specification
Small size, experimental model, an aluminium turned pulley of
about 10 cm dia is fitted on a screw jack fitted on a 12cm dia
metallic circular base with an adjustable pulley and a linear
vertical scale. Overall height of the model Is about 15 cm.
Without weights.
19. Worm and Worm WheelSpecification
An all metallic self contained apparatus useful for demonstrating
the efficiency of worm and wheel and also the principle of works.
Consisting of machine cut worm gear of 25 cm diameter,
carrying a metal drum on 12 cm diameter, and machine cut
worm on steel spindle carrying a 12 cm diameter pulley. The
whole arrangement is fixed on heavy cast iron bracket capable
to be a wall. Complete with effort pulley, string and hooks but
without weights.
(A) Single Purchase.
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
18/33
18
(B) Double Purchase.
(C) Triple Purchase. \
20. Deflection of Beam Apparatus.
Specification
Consisting of two knife edge end supports, a hanger with knife
edge, and a pointer moving over a graduated scale, complete
with scale pan and two beams, 120 cm in length. Without
weights.
21. Bending Of Beam Apparatus
Specification
It consists of a brass beam 9mm square one meter long resting
on the two knife edges fixed on heavy stands at the bases of
which are fitted leveling screw. A center knife edge with hanger
rests on the beam at the top of which is provided pin. Complete
with a cast iron slotted weights set having two weights of 1 kg,
two weights of kg and a hanger of 1kg.
22. Shear Force Apparatus
Specification
Consisting of two knife edge supports on stands and a seasonedwooden bar 180 cm long which is hinged at one point of its
length. The dynamometer is with an adjusting screw for restoring
line of beam under load conditions. Complete with three sliding
U shaped weights.
23. Bending Moment Apparatus
Specification
Consisting of a well seasoned wooden beam 180 cm long
hinged at a distance of 60 cm from one end, spring balance is
with adjusting screw so as to compensate the initial extension of
the spring and to keep the beam horizontal under any load.
Complete with three U shaped sliding weights and knife edge
end supports on stands.
24. Bar Pendulum or Compound Pendulum
Specification
Consisting of a steel bar 100 cm long bored at equal interval,
with two removable knife edges and a wall bracket.
25. Kater\'s of Reversible Pendulum
Specification
Comprising of 120x 1.2 cm brass bar with pointed ends, carrying
two sets of adjustable knife edges and large and small brass
weights. Two similar hard wood weights are provided. Complete
with cast iron wall bracket.
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
19/33
19
26. Inclined Plane Apparatus
Specification
It consists of a 15 x 60 cm. wooden board with glass top hinged
on an iron base to which a sector with graduated arc and vertical
scale is provided. The plan may be clamped at any angle up to
45 degree. A 5 cm. dia. frictionless pulley is attached to the end
by means of a clamp adjustable to any necessary position.
Complete with brass roller, cart and pan, but without weights.
27. Parallel Forces Apparatus (Dial type
balance)
Specification
Simple supported best type supported at its ends. For
verification of condition of equilibrium of parallel forces, law of
lever and forces on beam etc. Consisting of two compression
dial type balance. Dial type balance fixed on wooden polished
board, a wooden beam with steel back plate. Complete with two
stirrups, hooks and two 1kg weight.
(A) 10 Kg Dial Type Balance
(B) 20 Kg Dial Type Balance28. Parallel Forces Apparatus (Tubular spring
balance)
Specification
Simple supported best type supported at its ends. For
verification of condition of equilibrium of parallel forces, law of
lever and forces on beam etc. Consisting of two compression
thrust type 10 kg tubular spring balances fixed on wooden
polished board, a wooden beam with steel back plate. Complete
with two stirrups, hooks and two 1kg weights.
29. Compound Lever
Specification
Comprising of two iron beams connected to each other and fitted
on two different stands, well balanced with a scale pan. All metal
parts fitted on wooden polished base. Completed with 1 kg.
Weight and a physical iron nickelled weight
box 1-50 gms.
30. Bell Crank Lever (With Weight Attachments)
Specification
The apparatus consists of the following parts :
(i) A lever of well seasoned wood having horizontal arm 75 cm
and vertical arm 20 cm.
(ii) A spring balance of 10kg capacity with adjustable wing nut at
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
20/33
20
shorter end.
(iii) A set of slotted cast iron weights of 0.5 kg with necessary
one hanger (four sllotted weights and one hanger of 0.5 kg. Total
weight 2.5 kg The complete arrangement p mounted on steel
frame against wall. But without foundation bolts.
31. Bell Crank Lever(Without Weights)
Specification
A wooden right angled lever with fulcrum at the angle, the
horizontal arm is of 75 cm. and vertical arm is of 20 cm. a spring
balance with adjustable swing nut is attached to the shorter arm.
The lever arm is with scale and grooved at every 5 cm.
Complete with one sliding weight of 1 kg.
32. Cantilever Beam Apparat
Specification
Consists of a well seasoned wooden beam of L type shape, with
horizontal graduated horizontal arm 75cm and vertical arm of
20cm, with a spring balance of 10 kg capacity to make the
horizontal leg horizontal under any load. Complete with one
sliding slotted set weight set 100 gm to 1 kg.33. Jointed Roof Truss On Wheels
Specification
The apparatus is about 1. 2 meter in length and strongly
constructed in all metal, one leg is fitted on a immoveable
bracket and the other on rollers, Spring balances show tension
on the rod and the compression on rafters. Complete with
specially made dynamometer, chain and pan, but without
weights.
34. Simple Jib Crane
Specification
Consisting of a tubular compression balance, pivoted about an
axis fitted to the base. The tie chain has an adjustable angle
bracket and fitted with a 10 kg extension balance. Complete on
wooden base with 1.2 meter jib. Without weights.
35. Geared Jib Crane
Specification
Strongly built frame mounted on a heavy cast iron and
comprising of single and double wheels. The gears are machine
cut and the jib is 1.2 meter high and tapered at both ends. The
purchase. Complete with cord and hooks. Without weights
36. Coil Friction Apparatus
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
21/33
21
Specification
It consists of aluminium drum and three frictionless pulleys
mounted on wooden board 60x75 cm. in size. The pulleys can
be fixed to give a lap of 1/4 or 3/4 full circumference of drum,
complete with cord and two scale pans, but without weights.
Total 1.25
#Vetting committee considered the estimated quoted prices by the institutes as guideline the reasonability of cost/price verification can only be done at the time of procurementPlace :
Date :
Seal & Signature of Principal
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
22/33
22
FORMAT FOR SUBMISSION OF LIST OF EQUIPMENT FOR VALIDATION
(Under Centrally Sponsored Scheme for Up-gradation of Polytechnics)
Name and Address of Polytechnic : Kalaniketan Polytechnic College, Civil Lines, Jabalpur482001 (M.P.)
Phone(s) : 0761-2622952, 2621482 e-mail address :[email protected]
Branch : Mechanical. Name of Laboratory : SOM Lab
S
No.
Name of the
Equipment to
be procured
Quan
tity
Curriculu
m
References
Specification (please give enclosure references) Cost of
equip
ment
(in
Lacs)
Background material.
ProductBrochure.
Printout ofproduct
specifications
giving websitereference/URL.(
Please give
enclosurereference)
1 40 ton fully
computerizedUniversal
Testingmachine
01
No
SOM (305)
Max. Load1kN,2kN,3kN,5kN,10kN,20kN
25kN,30kN,50kN
Load accuracy1% (or 0.5% for special
order)
Deformationaccuracy 0.5%
Displacementresolution
0.001mm
Load speed 0.005-500mm/min
Spacing of grip togrip(mm)
750 640
Total crosshead 1075 1100
7.0 http://www.alibaba.co
m/product-gs/527199807/WDW_
E_Electronic_Computerized_Universal_Testin
g.html
mailto:[email protected]:[email protected]:[email protected]://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlhttp://www.alibaba.com/product-gs/527199807/WDW_E_Electronic_Computerized_Universal_Testing.htmlmailto:[email protected] -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
23/33
23
travel (mm)
Space betweencolumns(mm)
420 500
Height(mm) 1737 1944
Width(mm) 780 840
Depth(mm) 577 600
Weight of loadframe(kg)
160 250
Power110V, 1 phase, 60Hz/220V, 1
phase, 50Hz
2 Spring
Testing
machine
01
No
SOM (305) Maximum load 5KN,1ton,2ton,option
Accurate grade 1 grade /0.5 grade
Effective measuring range0.2%~100%(1
grade)/0.4%~100%(0.5 grade)Measuring accuracy the value 1% / the value 0.5%
Tester resolutionMax load 1/200000,constant the
resolution
Load sensor
Basic configuration:sensor(max
load): one
Extended configuration:can add
more sensors
Effective testing width 450mm(can be widened according
1.0 http://www.alibaba.co
m/product-
gs/489521108/spring_compression_testing_m
achine_HZ_1010_.html
http://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.htmlhttp://www.alibaba.com/product-gs/489521108/spring_compression_testing_machine_HZ_1010_.html -
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
24/33
24
to customers requirement)
Effective tensile space
400,500,600mm(can be increased
the height according to customers
requirement)
Range of testing speed 0.001~500mm/min
Accruacy of displacementmeasurement
Tolerance: 0.5%/ tolerance:0.2%
Deformation of measured
system
(according to the
requirements )
Min span :10mm,Max range of
deformation :800mm
Extended deformation :Mix span:
25mm,50mm,100mm, range of
deformation :5mm,10mm,25mm
Accuracy of measured
deformation
Tolerance :0.5% (according to
requirement of customer to
choose the larger or small
deformation)safety Electronic-limit protection
Testing platform moving
device
Fast /slow two speeds to
control,can jog
Back to function of testing
platform
Manual or automatic
operation,After the test, the moving
iron return to
initial position with the highest
speed by manual or automatic
operation
Overload protection Overload 10%,automatic protection
fixture A set of tensile fixture
Machine size1200*530*1800mm(lenght*width*h
eight)
MotorPanasonic AC servo motor and
drive
Power supply 220V,50HZ,
power 0.75KW(depending on different
-
7/30/2019 Machanical Engineeing Jabalpur Knpc Poly
25/33
25
demand of force, using different
motor)
weight (about)500 Kg
3 HardnessTesting
machine(Brinell cum
Rockwell)
01No
SOM (305) 1- Measuring range: 20-88HRA, 20-100HRB, 20-70HRC
2-Test force: 588.4, 980.7, 1471N (60, 100, 150kgf)
3- Max. height of test piece: 170mm
4-Depth of throat: 130mm
5-Unit for display: 0.1HR
6-Power supply: 220V AC or 110V AC, 50 or 60Hz
7-Dimensions: 500 x 250 x 700mm
8- Weight: approx. 75kg
Measuring range: